ZyXEL Communications WAP6806 Dual-Band Wireless AC2100 Access Point User Manual rev
ZyXEL Communications Corporation Dual-Band Wireless AC2100 Access Point rev
User Manual_rev.pdf
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3011302 |
| Application ID | bsRlWsvXy+99j2PXFbvO2g== |
| Document Description | User Manual_rev.pdf |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 434.97kB (5437111 bits) |
| Date Submitted | 2016-05-31 00:00:00 |
| Date Available | 2016-05-31 00:00:00 |
| Creation Date | 2015-12-14 09:12:20 |
| Producing Software | Acrobat Distiller 9.0.0 (Windows) |
| Document Lastmod | 2016-05-23 15:37:57 |
| Document Title | User Manual_rev.pdf |
| Document Creator | FrameMaker 9.0 |
ARMOR X1 (WAP6806) AC2100 Dual-Band Wireless Gigabit Access Point/Range Extender Version 1.00 Edition 1, 12/2015 Quick Start Guide User’s Guide Default Login Details Web Address http://zyxelsetup http://192.168.1.2 Passwordwww.zyxel.com 1234 Copyright © 2015 ZyXEL Communications Corporation IMPORTANT! READ CAREFULLY BEFORE USE. KEEP THIS GUIDE FOR FUTURE REFERENCE. Related Documentation • Quick Start Guide The Quick Start Guide shows how to connect the WAP6806 and access the Web Configurator wizards. (See the wizard real time help for information on configuring each screen.) It also contains a connection diagram and package contents list. WAP6806 User’s Guide Contents Overview Contents Overview User’s Guide .........................................................................................................................................8 Introduction ...............................................................................................................................................9 WAP6806 Modes ....................................................................................................................................15 Repeater Mode .......................................................................................................................................17 Access Point Mode .................................................................................................................................23 Client Mode .............................................................................................................................................27 The Web Configurator .............................................................................................................................30 Connection Wizard ..................................................................................................................................33 Status ......................................................................................................................................................44 Technical Reference ..........................................................................................................................48 Monitor ....................................................................................................................................................49 Operation Mode ......................................................................................................................................52 Ethernet ...................................................................................................................................................60 Wireless LAN ..........................................................................................................................................62 Management ...........................................................................................................................................74 Maintenance ............................................................................................................................................76 Troubleshooting ......................................................................................................................................83 WAP6806 User’s Guide Table of Contents Table of Contents Contents Overview ..............................................................................................................................3 Table of Contents .................................................................................................................................4 Part I: User’s Guide ........................................................................................... 8 Chapter 1 Introduction...........................................................................................................................................9 1.1 Overview .............................................................................................................................................9 1.2 Securing the WAP6806 .....................................................................................................................10 1.3 Panel Views ......................................................................................................................................10 1.4 WPS Button .......................................................................................................................................12 1.4.1 Wi-Fi Protected Setup .............................................................................................................12 1.5 Reset Button .....................................................................................................................................12 1.5.1 Procedure to Use the Reset Button .........................................................................................12 1.6 2-way Installation ..............................................................................................................................13 1.6.1 Stand .......................................................................................................................................13 1.6.2 Wall Mounting ..........................................................................................................................13 Chapter 2 WAP6806 Modes .................................................................................................................................15 2.1 Overview ...........................................................................................................................................15 2.1.1 Device Modes ..........................................................................................................................15 Chapter 3 Repeater Mode ....................................................................................................................................17 3.1 Overview ...........................................................................................................................................17 3.2 What You Can Do .............................................................................................................................17 3.3 What You Need to Know ...................................................................................................................18 3.3.1 Setting your WAP6806 to Repeater Mode ...............................................................................18 3.4 Repeater Mode Status Screen ..........................................................................................................18 3.5 WPS Screen ......................................................................................................................................20 Chapter 4 Access Point Mode.............................................................................................................................23 4.1 Overview ...........................................................................................................................................23 4.2 What You Can Do .............................................................................................................................23 4.3 What You Need to Know ...................................................................................................................23 WAP6806 User’s Guide Table of Contents 4.3.1 Setting your WAP6806 to AP Mode .........................................................................................24 4.3.2 Configuring your WLAN, LAN and Maintenance Settings .......................................................24 4.4 AP Mode Status Screen ....................................................................................................................24 Chapter 5 Client Mode .........................................................................................................................................27 5.1 Overview ...........................................................................................................................................27 5.2 What You Can Do .............................................................................................................................27 5.3 What You Need to Know ...................................................................................................................27 5.4 Setting your WAP6806 to Client Mode ..............................................................................................28 5.5 Client Mode Status Screen ................................................................................................................28 Chapter 6 The Web Configurator ........................................................................................................................30 6.1 Overview ...........................................................................................................................................30 6.2 Accessing the Web Configurator .......................................................................................................30 6.2.1 Login Screen ...........................................................................................................................30 6.2.2 Password Screen ....................................................................................................................31 6.3 Resetting the WAP6806 ....................................................................................................................32 Chapter 7 Connection Wizard .............................................................................................................................33 7.1 Overview ...........................................................................................................................................33 7.2 Using the Web Configurator Wizard ..................................................................................................33 7.3 Configuring the WAP6806 to AP Mode .............................................................................................33 7.4 Configuring the WAP6806 to Client Mode ........................................................................................35 7.5 Configuring the WAP6806 to Repeater Mode ...................................................................................38 Chapter 8 Status ...................................................................................................................................................44 8.1 WAP6806 Status ...............................................................................................................................44 8.2 Navigation Panel ...............................................................................................................................46 Part II: Technical Reference............................................................................ 48 Chapter 9 Monitor.................................................................................................................................................49 9.1 Overview ...........................................................................................................................................49 9.2 What You Can Do .............................................................................................................................49 9.3 System Log .......................................................................................................................................49 9.4 Statistics ............................................................................................................................................50 WAP6806 User’s Guide Table of Contents 9.5 WLAN Station Status .........................................................................................................................51 Chapter 10 Operation Mode ..................................................................................................................................52 10.1 Overview .........................................................................................................................................52 10.2 What You Can Do ...........................................................................................................................52 10.3 Operation Mode Setup ....................................................................................................................52 10.3.1 Client Mode Setup ................................................................................................................53 10.3.2 Repeater Mode Setup ...........................................................................................................53 10.4 AP Connection ................................................................................................................................55 10.4.1 WEP Encryption ....................................................................................................................57 10.4.2 WPA-Personal / WPA2-Personal / WPA/WPA2-Personal Mixed ...........................................58 Chapter 11 Ethernet ...............................................................................................................................................60 11.1 Overview .........................................................................................................................................60 11.2 What You Can Do ............................................................................................................................60 11.3 LAN Setup Screen ...........................................................................................................................60 11.4 IP Alias Screen ................................................................................................................................61 Chapter 12 Wireless LAN.......................................................................................................................................62 12.1 Overview .........................................................................................................................................62 12.2 What You Can Do ...........................................................................................................................62 12.3 What You Should Know ..................................................................................................................62 12.3.1 Wireless Security Overview ...................................................................................................62 12.4 General Wireless LAN Screen .......................................................................................................63 12.5 Wireless LAN Advanced Screen .....................................................................................................65 12.6 Security ...........................................................................................................................................66 12.7 WPS Screen ....................................................................................................................................69 12.7.1 Connecting to a Wireless Network Using WPS .....................................................................70 Chapter 13 Management........................................................................................................................................74 13.1 Overview .........................................................................................................................................74 13.2 What You Can Do ...........................................................................................................................74 13.3 MCL Screen ....................................................................................................................................74 13.4 One Connect Screen .......................................................................................................................75 Chapter 14 Maintenance ........................................................................................................................................76 14.1 Overview .........................................................................................................................................76 14.2 What You Can Do ...........................................................................................................................76 WAP6806 User’s Guide Table of Contents 14.3 System ............................................................................................................................................76 14.3.1 General Screen .....................................................................................................................76 14.3.2 Time Setting Screen ..............................................................................................................77 14.4 Firmware Upgrade Screen ..............................................................................................................78 14.5 Backup / Restore Screen ................................................................................................................80 14.5.1 Export Setting ........................................................................................................................81 14.5.2 Import Setting ........................................................................................................................81 14.5.3 Restore to Factory Defaults ...................................................................................................82 14.6 Reboot .............................................................................................................................................82 Chapter 15 Troubleshooting..................................................................................................................................83 15.1 Power, Hardware Connections, and LED ........................................................................................83 15.2 WAP6806 Access and Login ...........................................................................................................84 15.3 Internet Access ...............................................................................................................................85 15.4 Resetting the WAP6806 to Its Factory Defaults ..............................................................................86 15.5 Wireless Problems ..........................................................................................................................86 Appendix A Customer Support ..........................................................................................................88 Appendix B Setting Up Your Computer’s IP Address ........................................................................94 Appendix C Legal Information .........................................................................................................122 Index ..................................................................................................................................................131 WAP6806 User’s Guide P ART I User’s Guide C HAPT ER Introduction 1.1 Overview The ZyXEL WAP6806 Dual-Band Wireless AC2100 Access Point makes it fast and easy to easily extend existing IEEE 802.11 b/g/n/ac wireless networks. Simply plug the WAP6806 directly into a power outlet and the LED signal strength indicator allows you to determine the ideal installation location. The one-click Wi-Fi Protected Setup (WPS Button on page 12) provides frustration-free wireless client setup and completes the instant network access setup. LEW Figure 1 Universal Repeater WLAN REPEATER AP LAN Your can create the following connections using the WAP6806: • LAN. You can connect network devices via the Ethernet port of the WAP6806 so that they can communicate with each other and access the Internet. • WLAN. Wireless clients can connect to the WAP6806 to access network resources. Use a (supported) web browser to manage the WAP6806. See Chapter 8 on page 44 for more information. WAP6806 User’s Guide Chapter 1 Introduction 1.2 Securing the WAP6806 Do the following things regularly to make the WAP6806 more secure and to manage the WAP6806 more effectively. • Change the password. Use a password that’s not easy to guess and that consists of different types of characters, such as numbers and letters. • Write down the password and put it in a safe place. • Back up the configuration (and make sure you know how to restore it). Restoring an earlier working configuration may be useful if the device becomes unstable or even crashes. If you forget your password, you will have to reset the WAP6806 to its factory default settings. If you backed up an earlier configuration file, you would not have to totally re-configure the WAP6806. You could simply restore your last configuration. 1.3 Panel Views Figure 2 Panel Views Power LED Reset Button Ethernet Ports WPS Button WAP6806 User’s Guide 10 Chapter 1 Introduction The following table describes the LED status. Table 1 WAP6806 LED Status FUNCTION Power STATUS On (Green) The WAP6806 is receiving power and functioning properly. Blinking (Green) The WAP6806 is booting. Off Connection Status System WPS DESCRIPTION The WAP6806 is not receiving power. The device uses the LED to generate the following three signal colors: • • • Red: signifies a signal strength under 50% Orange: signifies a signal strength under 75% Green: signifies a signal strength over 75% Blinking (Red) The WAP6806 has an error. Blinking (all colors) The WAP6806 is resetting to the factory default or upgrading the firmware. Blinking (Amber) The WAP6806’s WPS function is in progress. The following table describes the LED combination status of 2.4G and 5G for dual uplink in repeater mode. Table 2 LED Combination Status of 2.4G and 5G COMBINATION EXCELLENT GOOD POOR (100% ~ 70%) (69% ~ 51%) (50% ~ 0%) BAND RESULT 2.4G Green 5G Green 2.4G Green 5G Amber 2.4G Amber 5G Green 2.4G Green Green Green Amber 5G Red 2.4G Amber 5G Amber 2.4G Amber Amber Red 2.4G Red Amber Red Amber 2.4G Red Red 5G Red Amber 2.4G 5G Amber 5G 5G Green Green WAP6806 User’s Guide 11 Chapter 1 Introduction 1.4 WPS Button The WPS button can be used to configure 2.4G and 5G settings. Table 3 WPS Button Functions ACTION RESULT Client Mode Push once for less than 5 seconds The WAP6806 triggers uplink WPS. AP Mode Push once for less than 5 seconds The WAP6806 triggers both 2.4G and 5G primary Service Set Identity (SSID) at the same time. Repeater Mode Push once for less than 5 seconds The WAP6806 triggers uplink WPS. Push twice for less than 5 seconds The WAP6806 triggers downlink WPS. 1.4.1 Wi-Fi Protected Setup Your WAP6806 supports Wi-Fi Protected Setup (WPS), which is an easy way to set up a secure wireless network. WPS is an industry standard specification, defined by the Wi-Fi Alliance. WPS allows you to quickly set up a wireless network with strong security, without having to configure security settings manually. Each WPS connection works between two devices. Both devices must support WPS (check each device’s documentation to make sure). Depending on the devices you have, you can either press a button (recommended) on the device itself, or in its configuration utility or enter a PIN (a unique Personal Identification Number that allows one device to authenticate the other) in each of the two devices. When WPS is activated on a device, it has two minutes to find another device that also has WPS activated. Then, the two devices connect and set up a secure network by themselves. For more information on using WPS, see Section 12.7 on page 69. 1.5 Reset Button If you forget your password or IP address, or you cannot access the Web Configurator, you will need to use the RESET button at the back of the WAP6806 to reload the factory-default configuration file. This means that you will lose all configurations that you had previously saved, the password will be reset to “1234” and the IP address of the WAP6806 will be reset to “192.168.1.2”. 1.5.1 Procedure to Use the Reset Button Make sure the power LED is on. Press the RESET button for one to five seconds to reboot the WAP6806. WAP6806 User’s Guide 12 Chapter 1 Introduction Press the RESET button for longer than five seconds to set the WAP6806 back to its factory-default configuration. 1.6 2-way Installation The WAP6806 can be used for 2-way installation: vertical and wall mounted. 1.6.1 Stand To have your WAP6806 as a stand-alone device, put you WAP6806 vertically into the stand as shown below. 1.6.2 Wall Mounting The following are the dimensions of a screw anchor and M3 tap screw used for wall mounting. All measurements are in millimeters (mm). WAP6806 User’s Guide 13 Chapter 1 Introduction Locate a high position on a wall that is free os obstructions. Use a sturdy wall. For a concrete or brick wall find a drill bit with the same diameter as the screw anchors. If you do not need the screw anchors, find a drill bit slightly smaller in diameter than the included screws. Drill two screw holes in the wall. Make sure the distance between the centers of the holes is the same as the wall-mount holes. Note: Be careful to avoid damaging pipes or cables located inside the wall when drilling holes for the screws. Align the holes on the back of the WAP6806 with the screws on the wall. Hang the WAP6806 on the screws. WAP6806 User’s Guide 14 C HAPT ER WAP6806 Modes 2.1 Overview This chapter introduces the different modes available on your WAP6806. • Device mode. This is the operating mode of your WAP6806, or simply how the WAP6806 is being used in the network. 2.1.1 Device Modes This refers to the operating mode of the WAP6806, which can act as a: • Repeater: In this mode, the WAP6806 can be an access point and a wireless client at the same time. Go to Section 3.4 on page 18 to view the Status screen in this mode. Use this mode if there is an existing wireless router or access point in your network and you also want to allow clients to connect to the WAP6806 wirelessly. • Access Point: Use this mode if you want to extend your network by allowing network devices to connect to the WAP6806 wirelessly. Go to Section 4.4 on page 24 to view the Status screen in this mode. • Client: Use this mode if there is an existing wireless router or access point in the network to which you want to connect your local network. Go to Section 5.5 on page 28 to view the Status screen in this mode. In Client mode, you should know the SSID and wireless security details of the access point to which you want to connect. The following figure illustrates the device configuration modes of the WAP6806. Figure 3 Device Mode Example WAP6806 User’s Guide 15 Chapter 2 WAP6806 Modes Note: Choose your device mode carefully to avoid having to change it later. Under Repeater mode, the WAP6806 supports three WPS behaviors: Normal mode, Range boost mode, and Speed boost mode. These behaviors are only available in Repeater mode through the Operation Mode screen. See Section 10.3.2 on page 53 for details. WAP6806 User’s Guide 16 C HAPT ER Repeater Mode 3.1 Overview In repeater mode, your WAP6806 can act as an access point and wireless client at the same time. The WAP6806 can connect to an existing network through another access point and also lets wireless clients connect to the network through it. This helps you expand wireless coverage when you have an access point or wireless router already in your network. In the example below, the WAP6806 (A) is configured as a repeater. It has three clients that want to connect to the Internet. The WAP6806 wirelessly connects to the available access point (B). Figure 4 Repeater Mode After the WAP6806 and the access point connect, the WAP6806 acquires its IP address from the access point. The clients of the WAP6806 can now surf the Internet. 3.2 What You Can Do • Use the Status screen (Section 3.4 on page 18) to view read-only information about your WAP6806. • Use the Ethernet > IP Alias screen (Section 11.4 on page 61) to set the IP address for your WAP6806. • Use the Wireless LAN > WPS screen (Section 12.7 on page 69) to configure WPS on the WAP6806 to associate to another access point. • Use the Network > Wireless LAN (2.4G/5G) > Security screen (Section 12.6 on page 66) to configure the wireless security between the WAP6806 and another access point. • Use other Wireless LAN screens (Section 12.5 on page 65) to configure the wireless settings between the wireless clients and the WAP6806. WAP6806 User’s Guide 17 Chapter 3 Repeater Mode 3.3 What You Need to Know With the exception of the Operation Mode other configuration screens in the Repeater mode are similar to the ones in Access Point Mode. See Chapter 2 on page 15 of this User’s Guide. 3.3.1 Setting your WAP6806 to Repeater Mode To use your WAP6806 as a repeater, see Section 2.1.1 on page 15. Connect your computer to the LAN port of the WAP6806. Open a web browser such as Internet Explorer and type http://zyxelsetup or http://192.168.1.2 as the web address in your web browser. Enter “1234” (default) as the password and click Login. Type a new password and retype it to confirm, then click Change. Otherwise, click Skip. See Section 7.5 on page 38 for details. Note: You have to log in to the Web Configurator again when you change modes. As soon as you do, your WAP6806 is already in Repeater mode. Note: If a client is connected to the WAP6806 through the wired Ethernet connection, the client can only directly access the 5 GHz Wi-Fi. In the following figure, the LAN Client is only able to directly communicate with devices in the 5 GHz wireless network. Figure 5 Repeater Mode Overview 5 GHz 5 GHz 5 GHz AP REPEATER WRE 5 GHz 2.4 GHz 2.4 GHz AP 2.4 GHz 2.4 GHz LAN Client 3.4 Repeater Mode Status Screen Click to open the Status screen. WAP6806 User’s Guide 18 Chapter 3 Repeater Mode Figure 6 Status: Repeater Mode The following table describes the labels shown in the Status screen. Table 4 Status Screen: Repeater Mode LABEL DESCRIPTION System Information Host Name This is the WAP6806’s model name. System Mode This is the device mode (Section 2.1.1 on page 15) to which the WAP6806 is set - Repeater Mode. Hardware Version This displays the hardware version of the device. Firmware Version This displays the firmware version and the date created. System Up Time This displays the total time the WAP6806 has been on. Current Date/Time This displays the WAP6806’s present date and time. Ethernet Information MAC Address This shows the LAN Ethernet adapter MAC Address of your device. IP Address This shows the LAN port’s IP address. IP Subnet Mask This shows the LAN port’s subnet mask. Encapsulation mode This shows the protocol for encapsulating packages the WAP6806 uses. Gateway This shows the gateway of the WAP6806. DNS Server This shows the IP address of the DNS Server. WAP6806 User’s Guide 19 Chapter 3 Repeater Mode Table 4 Status Screen: Repeater Mode (continued) LABEL DESCRIPTION IP Alias This shows the IP address of the WAP6806. Subnet Mask This shows the subnet mask of the WAP6806. AP Connection Status - 2.4G / 5G MAC Address This shows the wireless adapter MAC Address of the root AP. SSID This shows a descriptive name used to identify the root AP in the wireless LAN. Channel This shows the channel number which you select manually or the root AP automatically scans and selects. Security This shows the level of wireless security the root AP is using. Status This shows the current status of the Wireless LAN. Wireless Network Information - 2.4G / 5G MAC Address This shows the wireless adapter MAC Address of your WAP6806. Wireless Network This shows whether the wireless LAN function is enabled or disabled. SSID This shows a descriptive name used to identify the WAP6806 in the wireless LAN. Link Rate This shows the data transfer rate of the wireless network. Current Channel This shows the channel number which you select manually or the WAP6806 automatically scans and selects. Authentication This shows the wireless security mode used to protect the information that is sent in the wireless network. Mode This shows which IEEE 802.1b/g/n wireless networking standards the wireless device supports. WPS Status This shows the current status of the WPS. 3.5 WPS Screen Use this screen to connect to another AP. Go to Configuration > Network > Wireless LAN (2.4G/5G) > WPS to open the following screen. Note: Wireless clients cannot use WPS to set up a wireless network with the WAP6806 in repeater mode. WAP6806 User’s Guide 20 Chapter 3 Repeater Mode Figure 7 Repeater: Configuration > Network > Wireless LAN (2.4G/5G) > WPS Figure 8 AP: Configuration > Network > Wireless LAN (2.4G/5G) > WPS The following table describes the labels in this screen. Table 5 Repeater: Configuration > Network > Wireless LAN (2.4G / 5G) > WPS LABEL DESCRIPTION WPS Setup WPS Select this to enable or disable the WPS feature. Confirm Click Confirm to save your changes. WPS Setup Configured This displays Yes when the WAP6806 has connected to a wireless network using WPS or when Enable is selected. WPS SSID This displays the network name for the WPS connection. WPS Auth Mode This displays the security protocol selected for the WPS connection. WAP6806 User’s Guide 21 Chapter 3 Repeater Mode Table 5 Repeater: Configuration > Network > Wireless LAN (2.4G / 5G) > WPS (continued) LABEL DESCRIPTION WPS Encryption Type This displays the type of wireless encryption employed by the access point to which you want to connect. PIN Code This displays the previous PIN number the system generated. Generate New PIN Click Generate New PIN to have the WAP6806 generate a PIN number. Release Configuration Click this button to remove all configured wireless and wireless security settings for WPS connections on the WAP6806. WPS Progress WPS Mode Select whether the WAP6806 performs wireless security information synchronization using the PIN configuration method or the Push Button Configuration (PBC) method. PIN Code Type the same PIN number generated in the wireless station’s utility. Confirm Click Confirm to save your changes. WPS Status Status This displays the current WPS process. Idle - It means there is no active WPS. Start WSC Process - The WPS is activated to set up a wireless network. WPS Succeeded - The client is successfully connected with an AP. WSC Failed - The client fails to connect with an AP. Progress This is an indication bar displaying the WPS connecting progress. WAP6806 User’s Guide 22 C HAPT ER Access Point Mode 4.1 Overview In Access Point (AP) mode your WAP6806 bridges a wired network (LAN) and wireless LAN (WLAN) in the same subnet. See the figure below for an example. Figure 9 Wireless Internet Access in Access Point Mode 4.2 What You Can Do • Use the Status screen (Section 4.4 on page 24) to view read-only information about your WAP6806. • Use the IP Alias screen (Section 11.4 on page 61) to set the IP address for your WAP6806 acting as an access point. • Use the Wireless LAN > WPS screen (Section 12.7 on page 69) to configure WPS on the WAP6806 to associate with another access point. 4.3 What You Need to Know With the exception of the Operation Mode, other configuration screens in Access Point mode are similar to the ones in Repeater mode. See Chapter 2 on page 15 of this User’s Guide. WAP6806 User’s Guide 23 Chapter 4 Access Point Mode 4.3.1 Setting your WAP6806 to AP Mode By default, AP mode in the WAP6806 is not configured with a static IP address. To setup your WAP6806 in AP mode for the first time, the directly-connected router must have the DHCP server function enabled. Connect one end of an Ethernet cable to the Ethernet port on the WAP6806 and the other end to your router. Connect your computer to your network, make sure both the WAP6806 and computer are under the same subnet. Open a web browser window and type “http://zyxelsetup” or “http://192.168.1.2” in the web address. The login screen displays. Enter “1234” (default) as the password and click Login. Type a new password and retype it to confirm, then click Change. Otherwise, click Skip. The WAP6806 Web Configurator displays, which allows you to configure the AP mode. See Section 7.3 on page 33 for details. 4.3.2 Configuring your WLAN, LAN and Maintenance Settings • See Chapter 12 on page 62 and Chapter 11 on page 60 for information on configuring your wireless network and LAN settings. • See Chapter 14 on page 76 for information on configuring your Maintenance settings. 4.4 AP Mode Status Screen Click to open the Status screen. WAP6806 User’s Guide 24 Chapter 4 Access Point Mode Figure 10 Status Screen: Access Point Mode The following table describes the labels shown in the Status screen. Table 6 Status Screen: Access Point Mode LABEL DESCRIPTION System Information Host Name This is the WAP6806’s model name. System Mode This is the device mode (Section 2.1.1 on page 15) to which the WAP6806 is set - AP Mode. Hardware Version This displays the hardware version of the device. Firmware Version This displays the firmware version and the date created. System Up Time This displays the total time the WAP6806 has been on. Current Date/Time This displays the WAP6806’s present date and time. Ethernet Information MAC Address This shows the LAN Ethernet adapter MAC Address of your device. IP Address This shows the LAN port’s IP address. IP Subnet Mask This shows the LAN port’s subnet mask. Encapsulation mode This shows the protocol for encapsulating packages the WAP6806 uses. Gateway This shows the gateway of the WAP6806. DNS Server This shows the IP address of the DNS Server. IP Alias This shows the IP address of the WAP6806. Subnet Mask This shows the subnet mask of the WAP6806. Wireless Network Information - 2.4G / 5G MAC Address This shows the wireless adapter MAC Address of your WAP6806. WAP6806 User’s Guide 25 Chapter 4 Access Point Mode Table 6 Status Screen: Access Point Mode (continued) LABEL DESCRIPTION Wireless Network This shows whether the wireless LAN function is enabled or disabled. SSID This shows a descriptive name used to identify the WAP6806 in the wireless LAN. Link Rate This shows the data transfer rate of the wireless network. Current Channel This shows the channel number which you select manually or the WAP6806 automatically scans and selects. Authentication This shows the wireless security mode used to protect the information that is sent in the wireless network. Mode This shows which IEEE 802.1b/g/n wireless networking standards the wireless device supports. WPS Status This shows the current status of the WPS. WAP6806 User’s Guide 26 C HAPT ER Client Mode 5.1 Overview Your WAP6806 can act as a wireless client. In wireless client mode, it can connect to an existing network via an access point. Use this mode if you already have an access point or wireless router in your network. In the example below, one WAP6806 (A) is configured as a wireless client and another is used as an access point (B). The WAP6806 has two wired clients that need to connect to the Internet. The WAP6806 wirelessly connects to the available access point (B). Figure 11 Wireless Client Mode After the WAP6806 and the access point connect, the WAP6806 acquires its WAN IP address from the access point. The clients of the WAP6806 can now surf the Internet. 5.2 What You Can Do • Use the Status screen (Section 5.5 on page 28) to view read-only information about your WAP6806. • Use the Ethernet screen (Chapter 11 on page 60) to set the IP address for your WAP6806. 5.3 What You Need to Know With the exception of the Wireless LAN screens, the Ethernet, Monitor, Configuration and Maintenance screens in Client mode are similar to the ones in Access Point Mode. See Chapter 11 on page 60 through Chapter 14 on page 76 of this User’s Guide. WAP6806 User’s Guide 27 Chapter 5 Client Mode 5.4 Setting your WAP6806 to Client Mode Connect your computer to the LAN port of the WAP6806. The default IP address of the WAP6806 is “192.168.1.2”. In this case, your computer must have an IP address in the range between “192.168.1.3” and “192.168.1.254”. Click Start > Run on your computer in Windows. Type “cmd” in the dialog box. Enter “ipconfig” to show your computer’s IP address. If your computer’s IP address is not in the correct range then see Appendix B on page 94 for information on changing your computer’s IP address. After you’ve set your computer’s IP address, open a web browser such as Internet Explorer and type “ http://zyxelsetup” or “http://192.168.1.2” as the web address in your web browser. Enter “1234” (default) as the password and click Login. Type a new password and retype it to confirm, then click Change. Otherwise, click Skip. Note: You have to log in to the Web Configurator again when you change modes. As soon as you do, your WAP6806 is already in Client mode. Note: The client mode IP address is always the same as the access point mode IP address. If you changed the IP address of your WAP6806 while in access point mode, use this IP address in client mode. 5.5 Client Mode Status Screen Click to open the status screen. Figure 12 Status: Client Mode WAP6806 User’s Guide 28 Chapter 5 Client Mode The following table describes the labels shown in the Status screen. Table 7 Status Screen: Client Mode LABEL DESCRIPTION Device Information Host Name This is the WAP6806’s model name. System Mode This is the device mode (Section 2.1.1 on page 15) to which the WAP6806 is set - Client Mode. Hardware Version This displays the hardware version of the device. Firmware Version This displays the firmware version and the date created. System Up Time This displays the total time the WAP6806 has been on. Current Date/Time This displays the WAP6806’s present date and time. Ethernet Information MAC Address This shows the LAN Ethernet adapter MAC Address of your device. IP Address This shows the LAN port’s IP address. Subnet Mask This shows the LAN port’s subnet mask. Encapsulation Mode This shows the protocol for encapsulating packets the WAP6806 uses. Gateway This shows the gateway of the WAP6806. DNS Server This shows the IP address of the DNS Server. IP Alias This shows the IP address of the WAP6806. Subnet Mask This shows the subnet mask of the WAP6806. AP Connection Status - 2.4G / 5G MAC Address This shows the wireless adapter MAC Address of the root AP. SSID This shows a descriptive name used to identify the root AP in the wireless LAN. Channel This shows the channel number which you select manually or the root AP automatically scans and selects. Security This shows the level of wireless security the root AP is using. Status This shows the current status of the Wireless LAN. WAP6806 User’s Guide 29 C HAPT ER The Web Configurator 6.1 Overview This chapter describes how to access the WAP6806 Web Configurator and provides an overview of its screens. The Web Configurator is an HTML-based management interface that allows easy setup and management of the WAP6806 via Internet browser. Use a browser that supports HTML5, such as Internet Explorer 9.0 and later versions, Mozilla Firefox 21 and later versions, or Safari 6.0 and later versions or Google Chrome 26.0 and later versions. The recommended screen resolution is 1024 by 768 pixels. In order to use the Web Configurator you need to allow: • Web browser pop-up windows from your device. Web pop-up blocking is enabled by default in Windows XP SP (Service Pack) 2. • JavaScript (enabled by default). • Java permissions (enabled by default). Refer to Chapter 15 Troubleshooting to see how to make sure these functions are allowed in Internet Explorer. 6.2 Accessing the Web Configurator Make sure your WAP6806 hardware is properly connected and prepare your computer or computer network to connect to the WAP6806 (refer to the Quick Start Guide). Launch your web browser. Open a web browser such as Internet Explorer and type “http://zyxelsetup” or “http://192.168.1.2” as the web address in your web browser. 6.2.1 Login Screen The Web Configurator initially displays the following login screen. WAP6806 User’s Guide 30 Chapter 6 The Web Configurator Figure 13 Login Screen The following table describes the label in this screen. Table 8 Login screen LABEL DESCRIPTION Password Type "1234" (default) as the password. 6.2.2 Password Screen You should see a screen asking you to change your password (highly recommended) as shown next. Figure 14 Change Password Screen WAP6806 User’s Guide 31 Chapter 6 The Web Configurator The following table describes the labels in this screen. Table 9 Change Password Screen LABEL DESCRIPTION New Password Type a new password. Confirm Password Retype the password for confirmation. Change Click Change to save your changes back to the WAP6806. Skip Click Skip if you do not want to change the password this time. 6.3 Resetting the WAP6806 If you forget your password or IP address, or you cannot access the Web Configurator, use the Reset button to reboot the WAP6806. See Section 1.5 on page 12 for more details. WAP6806 User’s Guide 32 C HAPT ER Connection Wizard 7.1 Overview This chapter provides information on the wizard setup screens in the Web Configurator. The Web Configurator’s wizard setup helps you configure your device for different modes. 7.2 Using the Web Configurator Wizard After you log in to the WAP6806 Web Configurator, the eaZy 123 Setup screen displays. Figure 15 Web Configurator Wizard 7.3 Configuring the WAP6806 to AP Mode In wireless client mode, your WAP6806 bridges a wired network (LAN) and wireless LAN (WLAN) in the same subnet. Select Access Point Mode in the eaZy 123 Setup screen. The following screen displays. WAP6806 User’s Guide 33 Chapter 7 Connection Wizard Figure 16 eaZy 123 Setup -- Access Point Mode Type the SSID and password for 2.4 GHz and 5 GHz (optional) wireless network, and then click Apply. After entering the wireless network’s password, the WAP6806 starts applying the wireless network as follows. Figure 17 Applying the Wireless Network The following screen appears if the network configuration is successful. WAP6806 User’s Guide 34 Chapter 7 Connection Wizard Figure 18 Wireless Network Configuration Complete You can click Expert to go to the Status screen. 7.4 Configuring the WAP6806 to Client Mode In wireless client mode, your WAP6806 connects to an existing network via an access point. Select Client Mode in the eaZy 123 Setup screen. The wizard scans for available networks as shown in the following screen. Figure 19 Wizard Scanning for Wireless Network Select an available Wi-Fi network from the Wi-Fi Network list, as shown in the following screen. WAP6806 User’s Guide 35 Chapter 7 Connection Wizard Figure 20 Wireless Network List WAP6806 User’s Guide 36 Chapter 7 Connection Wizard The following table describes the label in this screen. Table 10 Wireless Network List LABEL DESCRIPTION Select Use the radio button to select the wireless device to which you want to connect. Signal (%) This displays the strength of the wireless signal. The signal strength mainly depends on the antenna output power and the distance between your WAP6806 and this device. Wi-Fi Network This displays the SSID of the wireless device. Security This displays the type of security configured on the wireless device. When None is shown, no security is configured and you can connect to it without a password. Wireless This displays which IEEE 802.1b/g/n/ac wireless networking standards the wireless device supports. Continue Click Continue to go to the next step in the setup process. Scan Again Click Scan Again to search for available wireless devices within transmission range and update this table. Choose Network Manually Click Choose Network Manually to set up the AP manually. You need to know the wireless device’s SSID and password. Click Continue to go to the next step. Type the selected network’s wireless password and then click Continue. Figure 21 Enter Wireless Network Password After entering the wireless network’s password, the verification screen displays as follows. Figure 22 Verifying the Password WAP6806 User’s Guide 37 Chapter 7 Connection Wizard The following screen appears if the key verifies successfully. Figure 23 Wireless Network Configuration Complete You can click Expert to go to the Status screen. 7.5 Configuring the WAP6806 to Repeater Mode In wireless client mode, your WAP6806 can act as an access point and wireless client at the same time. Select Repeater Mode in the eaZy 123 Setup screen. The wizard scans for available networks as shown in the following screen. Figure 24 Wizard Scanning for Wireless Network Select an available 2.4G Wi-Fi network from the Wi-Fi Network list, as shown in the following screen. WAP6806 User’s Guide 38 Chapter 7 Connection Wizard Figure 25 Wireless Network List WAP6806 User’s Guide 39 Chapter 7 Connection Wizard The following table describes the label in this screen. Table 11 Wireless Network List LABEL DESCRIPTION Select Use the radio button to select the wireless device to which you want to connect. Signal (%) This displays the strength of the wireless signal. The signal strength mainly depends on the antenna output power and the distance between your WAP6806 and this device. Wi-Fi Network This displays the SSID of the wireless device. Security This displays the type of security configured on the wireless device. When None is shown, no security is configured and you can connect to it without a password. Wireless This displays which IEEE 802.1b/g/n wireless networking standards the wireless device supports. Continue Click Continue to go to the next step in the setup process. Scan Again Click Scan Again to search for available wireless devices within transmission range and update this table. Choose Network Manually Click Choose Network Manually to set up the AP manually. You need to know the wireless device’s SSID and password. Skip 2.4 GHz Click Skip 2.4 GHz to go to set up the 5 GHz wireless network without configuring the 2.4G wireless network setup. Click Continue to go to the next step. Type the selected network’s wireless password and then click Continue. Figure 26 Enter Wireless Network Password Select an available 5G Wi-Fi network from the Wi-Fi Network list, as shown in the following screen. WAP6806 User’s Guide 40 Chapter 7 Connection Wizard Figure 27 Wireless Network List The following table describes the label in this screen. Table 12 Wireless Network List LABEL DESCRIPTION Select Use the radio button to select the wireless device to which you want to connect. Signal (%) This displays the strength of the wireless signal. The signal strength mainly depends on the antenna output power and the distance between your WAP6806 and this device. Wi-Fi Network This displays the SSID of the wireless device. Security This displays the type of security configured on the wireless device. When None is shown, no security is configured and you can connect to it without a password. Wireless This displays which IEEE 802.1b/g/n wireless networking standards the wireless device supports. Continue Click Continue to go to the next step in the setup process. Scan Again Click Scan Again to search for available wireless devices within transmission range and update this table. Choose Network Manually Click Choose Network Manually to set up the AP manually. You need to know the wireless device’s SSID and password. Skip 5 GHz Click Skip 5 GHz to go to the next step without configuring the 2.4G wireless network setup. Click Continue to go to the next step. Verify the SSIDs and passwords of 2.4G/5G wireless network, and then click Apply. WAP6806 User’s Guide 41 Chapter 7 Connection Wizard Figure 28 Set the Repeater’s Wireless Network After verifying the SSIDs and passwords, the WAP6806 starts applying the wireless network as follows. Figure 29 Applying the Wireless Network The following screen appears if the key verifies successfully. WAP6806 User’s Guide 42 Chapter 7 Connection Wizard Figure 30 Wireless Network Configuration Complete You can click Expert to go to the Status screen. WAP6806 User’s Guide 43 C HAPT ER Status 8.1 WAP6806 Status The screens below show the status screen. Figure 31 Client Mode > Status Screen Figure 32 AP Mode > Status Screen WAP6806 User’s Guide 44 Chapter 8 Status Figure 33 Repeater Mode > Status Screen The following table describes the items shown on the top-right corner of the screen. Table 13 Items on the Top-Right ICON DESCRIPTION Logout Click this at any time to exit the Web Configurator. eaZy123 Click this hyperlink to open the setup wizard. Home Click this icon to go back to the Status screen. About Click this icon to view copyright and a link for related product information. Select a number of seconds or None from the drop-down list box to refresh all screen statistics automatically at the end of every time interval or to not refresh the screen statistics. Click this button to refresh the status screen. For the Status screen of Repeater Mode, please go to Table 4 on page 19 for details. For the Status screen of AP Mode, please go to Table 6 on page 25 for details. For the Status screen of Client Mode, please go to Table 7 on page 29 for details. WAP6806 User’s Guide 45 Chapter 8 Status 8.2 Navigation Panel Use the menu in the navigation panel menus to configure WAP6806 features. Figure 34 Menus The following table describes the sub-menus. Table 14 Menus LINK TAB Status FUNCTION This screen shows the WAP6806’s general device, system and interface status information. Monitor System Log This screen shows the logs for categories such as system maintenance and system errors. Statistics This screen shows the packet statistics of each port and the system up time. You can configure the Poll Interval to refresh the screen. WLAN Station Status This screen shows the wireless stations that are currently connected to the WAP6806. Note: This is for Repeater and AP mode only. Configuration Operation Mode Ethernet Wireless LAN 2.4G / 5G (for Repeater and AP mode only) Management Operation Mode Setup Use this screen to select a system operation mode. AP Connection Use the screen to configure the AP connection settings. LAN Setup Use this screen to configure the LAN port’s settings. IP Alias Use this screen to configure the WAP6806’s IP address and subnet mask. General Use this screen to configure wireless LAN. Advanced This screen allows you to configure advanced wireless settings. Security Use this screen to select the available security modes as defined by the paired AP or wireless router. WPS Use this screen to configure WPS. MCL Use this screen to enable or disable services. One Connect Use this screen to enable or disable the auto-configuration of One Connect. General Use this screen to change the password. Time Setting Use this screen to configure the WAP6806’s time based on your local time zone. Maintenance System Firmware Upgrade Use this screen to upload firmware to your WAP6806. WAP6806 User’s Guide 46 Chapter 8 Status Table 14 Menus (continued) LINK TAB FUNCTION Backup/ Restore Use this screen to backup and restore the configuration or reset the factory defaults to your WAP6806. Reboot Use this screen to restart the system. WAP6806 User’s Guide 47 P ART II Technical Reference 48 C HAPT ER Monitor 9.1 Overview This chapter discusses read-only information related to the device state of the WAP6806. 9.2 What You Can Do • Use the System Log screen (Section 9.3 on page 49) to view the logs for the categories such as system maintenance, system errors, and so on. • Use the Statistics screen (Section 9.4 on page 50) to view port status, packet specific statistics, the "system up time" and so on. • Use the WLAN Station Status screen (Section 9.5 on page 51) to view the wireless stations that are currently associated to the WAP6806. 9.3 System Log Click Monitor > System Log. Use the View Log screen to see the logged messages for the WAP6806. Log entries in red indicate system error logs. The log wraps around and deletes the old entries after it fills. Figure 35 Monitor > System Log WAP6806 User’s Guide 49 Chapter 9 Monitor The following table describes the labels in this screen. Table 15 Monitor > Log LABEL DESCRIPTION Refresh Click Refresh to renew the log screen. Clear Log Click Clear Log to delete all the logs. 9.4 Statistics Click Monitor > Statistics. Read-only information here includes port status, packet specific statistics and the "system up time". The Poll Interval(s) field is configurable and is used for refreshing the screen. Figure 36 Monitor > Statistics The following table describes the labels in this screen. Table 16 Monitor > Statistics LABEL DESCRIPTION Port This is the WAP6806’s port type. TxPkts This is the number of transmitted packets on this port. RxPkts This is the number of received packets on this port. Tx Bytes This displays the transmission speed in bytes per second on this port. Rx Bytes This displays the reception speed in bytes per second on this port. Tx Drop This displays the amount of packets that are dropped on the transmitting direction. Rx Drop This displays the amount of packets that are dropped on the receiving direction. Tx Error This displays the amount of packets that have errors on the transmitting direction. Rx Error This displays the amount of packets that have errors on the receiving direction. System Up Time This is the total time the WAP6806 has been on. Poll Interval(s) Enter the time interval in seconds for refreshing statistics in this field. Set Interval Click this button to apply the new poll interval you entered in the Poll Interval(s) field. Stop Click Stop to stop refreshing statistics. Refresh Click Refresh to renew the statistics screen. WAP6806 User’s Guide 50 Chapter 9 Monitor 9.5 WLAN Station Status Click Monitor > WLAN Station Status. View the wireless stations that are currently associated to the WAP6806 in the Connection List. Connection means that a wireless client (for example, your network or computer with a wireless network card) has connected successfully to the AP (or wireless router) using the same SSID, channel and security settings. Note: This screen is not available when the WAP6806 is in Client mode. Figure 37 Monitor > WLAN Station Status The following table describes the labels in this screen. Table 17 Monitor > WLAN Station Status LABEL DESCRIPTION This is the index number of an associated wireless station. MAC Address This field displays the MAC address of the connected wireless station. RSSI Received Signal Strength Indication (RSSI) is a measurement of the signal strength. Signal strength is displayed in units of decibel-milliwatts (dBm) and as a negative number. The stronger the signal, the better the quality of the connection. BW This displays the bandwidth the radio frequency (RF) uses. The bigger the bandwidth, the faster the link rate. Link Rate This displays the data transfer rate between the wireless station and the WAP6806. Connection Time This field displays the time a wireless station first connected to the WAP6806’s WLAN network. SSID This field displays the Service Set Identity (SSID) of the connected wireless station. Refresh Click Refresh to reload the list. WAP6806 User’s Guide 51 C HAPTER 10 Operation Mode 10.1 Overview This chapter provides information on the Operation Mode screens. 10.2 What You Can Do • Use the Operation Mode screen (Section 10.3 on page 52) to select how you want to use your WAP6806. • Use the AP Connection screen (Section 10.4 on page 55) to view the AP connection status and configure the AP connection settings. 10.3 Operation Mode Setup Use this screen to configure the system operation mode. Click Configuration > Operation Mode > Operation Mode Setup. The following screen displays. Figure 38 Configuration > Operation Mode > Operation Mode Setup The following table describes the labels in this screen. Table 18 Configuration > Operation Mode > Operation Mode Setup LABEL DESCRIPTION Operation Mode Select the system operation mode you want to use. • • • Select AP Mode to have your device bridge traffic between clients on the same network. Select Client Mode to have your device act as a wireless client to connect to an existing access point. See Section 10.3.1 on page 53 for more details. Select Repeater Mode if you want to have wireless clients associate with the WAP6806 and also want to connect the WAP6806 to an existing access point. See Section 10.3.2 on page 53 for more details. WAP6806 User’s Guide 52 Chapter 10 Operation Mode Table 18 Configuration > Operation Mode > Operation Mode Setup LABEL DESCRIPTION Confirm Click Confirm to save your changes. Reset Click Reset to begin configuring this screen afresh. 10.3.1 Client Mode Setup Click Configuration > Operation Mode > Operation Mode Setup and then select Client Mode. Figure 39 Configuration > Operation Mode > Operation Mode Setup The following table describes the labels in this screen. Table 19 Configuration > Operation Mode > Operation Mode Setup LABEL DESCRIPTION Operating Band Select the operating band you want to use. Confirm Click Confirm to save your changes. Reset Click Reset to begin configuring this screen afresh. 10.3.2 Repeater Mode Setup Click Configuration > Operation Mode > Operation Mode Setup and then select Repeater Mode. Figure 40 Configuration > Operation Mode > Operation Mode Setup WAP6806 User’s Guide 53 Chapter 10 Operation Mode The following table describes the labels in this screen. Table 20 Maintenance > General LABEL DESCRIPTION Repeater Mode Select the type of Repeater mode: Normal - both 2.4G and 5G bands are supported in up and down broadcasting. Speed - the 5G band is supported on the up behavior, while the 2.4G/5G bands are supported on the down behavior. Ranging - the 2.4G band is supported on the up behavior, while the 2.4G/5G bands are supported on the down behavior. Confirm Click Confirm to save your changes. Reset Click Reset to begin configuring this screen afresh. You can select the type of Repeater mode: Normal, Ranging, or Speed mode. The device enables you to extend the range of your dual-band router to eliminate "dead spots" in your wireless network. You can choose from normal, ranging, or speed modes for both your 2.4GHz and 5GHz networks. The following terms are used to describe the Repeater mode: • Up: The connection from the WAP6806 to the Router • Down: The connection from the WAP6806 to a client The following section describes the normal, ranging, or speed modes. As connection profiles are established, the WAP6806 maintains a record of the varying profiles and automatically joins the network when in range. Note: The home wireless network is the initial setup environment. The WAP6806 does not have any established network profiles at the time of initial setup. 10.3.2.1 Normal Mode In Normal mode, both Down and Up are supported for both 2.4 GHz and 5 GHz bands. Figure 41 Repeater Mode: Normal Mode 2.4 GHz / 5 GHz Up 2.4 GHz / 5 GHz Down Universal Repeater Client WAP6806 User’s Guide 54 Chapter 10 Operation Mode 10.3.2.2 Ranging Mode In Ranging mode, the 2.4 GHz band is supported on the Up behavior, while the 2.4 GHz and 5 GHz bands are supported on the Up behavior. Figure 42 Repeater Mode: Ranging Mode 2.4 GHz Up 2.4 GHz/5 5 GHz GHz Universal Repeater Down Client 10.3.2.3 Speed Mode In speed mode, the 5 GHz band is supported on the Up behavior, while the 2.4 GHz and 5 GHz bands are supported on the Up behavior. Figure 43 Repeater Mode: Speed Mode 5 GHz Up 2.4 GHz/5 2.4 GHzGHz Down Universal Repeater Client 10.4 AP Connection Use this screen to configure the AP connection settings. Click Configuration > Operation Mode > AP Connection. Note: AP Connection screens are not available when the WAP6806 is in AP mode. WAP6806 User’s Guide 55 Chapter 10 Operation Mode Figure 44 Configuration > Operation Mode > AP Connection The following table describes the labels in this screen. Table 21 Configuration > Operation Mode > AP Connection LABEL DESCRIPTION AP Connection Status 2.4 GHz Connection Status This field displays the connected 2.4G wireless network name. 5 GHz Connection Status This field displays the connected 5G wireless network name. Setup AP Connection Manually SSID Use this field to type the SSID of the AP. This is useful when the AP’s SSID is hidden. Encryption Type Use this field to select an encryption mode to protect the information that is sent in the wireless network. None - allows wireless clients to communicate with the AP without any data encryption. WEP - See Section 10.4.1 on page 57 for details. WPA-Personal - See Section 10.4.2 on page 58 for details. WPA2-Personal - See Section 10.4.2 on page 58 for details. WPA/WPA2-Personal Mixed - See Section 10.4.2 on page 58 for details. Confirm 2.4G Click Confirm 2.4G to save your changes. Confirm 5G Click Confirm 5G to save your changes. AP Connection List WAP6806 User’s Guide 56 Chapter 10 Operation Mode Table 21 Configuration > Operation Mode > AP Connection (continued) LABEL DESCRIPTION Scan Click Scan to display the wireless networks your WAP6806 can connect to as shown in the figure below. Wireless Network Connection List This list displays the wireless networks your WAP6806 can connect to. # - Click this field to select a wireless network for your WAP6806. SSID - This displays the SSID of the wireless device. BSSID - This displays the MAC address of the wireless device. Channel - This displays the channel number used by this wireless device. Security - This displays the type of security configured on the wireless device. Signal (%) - This displays the strength of the wireless signal. The signal strength depends on the antenna output power and distance between your WAP6806 and the wireless device. Key Use this field to type the selected network’s wireless password. Confirm Click Confirm to save your changes. Reset Click Reset to begin configuring this screen afresh. 10.4.1 WEP Encryption Wire Equivalence Protection (WEP) encryption scrambles the data transmitted between the wireless stations and the access points to keep network communication private. It encrypts unicast and multicast communications in a network. Both the wireless stations and the access points must use the same WEP key. Select WEP from the Encryption Type list. WAP6806 User’s Guide 57 Chapter 10 Operation Mode Figure 45 WEP Encryption The following table describes the labels in this screen. Table 22 WEP Encryption LABEL DESCRIPTION Key Index Select one index for configuring a key. The default key index is Key 1. You must configure at least one key, and only one key is activated at one time. WEP Key WEP keys are used to encrypt data. Both the WAP6806 and the wireless stations must use the same WEP key for data transmission. ASCII - Select this option to enter ASCII characters as a WEP key. Hex - Select this option to enter hexadecimal characters as a WEP key. Confirm 2.4G Click Confirm 2.4G to save your changes. 10.4.2 WPA-Personal / WPA2-Personal / WPA/WPA2-Personal Mixed Wi-Fi Protected (WPA) is a subset of the IEEE 802.11i standard. WPA2 (IEEE 802.11i) is a wireless security standard that defines stronger encryption, authentication and key management than WPA. Key differences between WPA or WPA2 and WEP are improved data encryption and user authentication. If both an AP and the wireless clients support WPA2 and you have an external RADIUS server, use WPA2 for stronger data encryption. If you don’t have an external RADIUS server, you should use WPA-Personal that only requires a single (identical) password entered into each access point, wireless gateway and wireless client. As long as the password match, a wireless client will be granted access to a WLAN. If the AP or the wireless clients do not support WPA2, just use WPA or WPA-Personal depending on whether you have an external RADIUS server or not. Select WEP only when the AP and/or wireless clients do not support WPA or WPA2. WEP is less secure than WPA or WPA2. Select WPA-Personal, WPA2-Personal, or WPA/WPA2-Personal Mixed from the Encryption Type list. Figure 46 WPA-Personal, WPA2-Personal, or WPA/WPA2-Personal Mixed WAP6806 User’s Guide 58 Chapter 10 Operation Mode The following table describes the labels in this screen. Table 23 WPA-Personal, WPA2-Personal, or WPA/WPA2-Personal Mixed LABEL DESCRIPTION Encryption Select TKIP, AES, or TKIP/AES to enable data encryption. TKIP - Temporal Key Integrity Protocol (TKIP) uses 128-bit keys that are dynamically generated and distributed by the authentication server. AES - Advanced Encryption Standard (AES) is a block cipher that uses a 256-bit mathematical algorithm called Rijndael. TKIP/AES- Supports both the TKIP and AES encryption types at the same time. Key WPA-Personal, WPA2-Personal, and WPA/WPA2-Personal Mixed uses a simple common password for authentication. Type a password from 8 to 63 ASCII characters or 64 hexadecimal characters. Confirm 2.4G Click Confirm 2.4G to save your changes. Confirm 5G Click Confirm 5G to save your changes. WAP6806 User’s Guide 59 C HAPTER 11 Ethernet 11.1 Overview This chapter describes how to configure LAN settings. 11.2 What You Can Do • Use the LAN Setup screen (Section 11.3 on page 60) to change the IP address for your WAP6806. • Use the IP Alias screen (Section 11.4 on page 61) to have the WAP6806 apply IP alias to create LAN subnets. 11.3 LAN Setup Screen This screen allows you to assign the WAP6806 a fixed or dynamic management IP address. The default IP address of the WAP6806 in repeater mode is 192.168.1.2. Alternatively, you can connect to the WAP6806 using the default domain name, http://zyxelsetup. Use this screen to change the WAP6806’s management IP address. Click Configuration > Network > Ethernet > LAN Setup. Figure 47 Configuration > Network > Ethernet > LAN Setup WAP6806 User’s Guide 60 Chapter 11 Ethernet The following table describes the labels in this screen. Table 24 Configuration > Network > Ethernet > LAN Setup LABEL DESCRIPTION Get from DHCP Server Select this to have the WAP6806 get a dynamic IP address from a DHCP server. Use Static IP Address Click this to enable the manual IP configuration. IP Address Enter the IP address of your WAP6806 in dotted decimal notation. Subnet Mask Enter the subnet mask of your WAP6806 in dotted decimal notation. Default Gateway Enter the gateway of your WAP6806 in dotted decimal notation. Confirm Click Confirm to save your changes. Reset Click Reset to reload the previous configuration for this screen. 11.4 IP Alias Screen IP alias allows you to partition a physical network into different logical networks over the same Ethernet interface. The WAP6806 supports three logical LAN interfaces via its single physical Ethernet interface with the WAP6806 itself as the gateway for each LAN network. Use this screen to have the WAP6806 apply IP alias to create LAN subnets. Click Configuration > Network > Ethernet > IP Alias. Figure 48 Configuration > Network > Ethernet > IP Alias The following table describes the labels in this screen. Table 25 Configuration > Network > Ethernet > IP Alias LABEL DESCRIPTION IP Address Enter the IP alias address of your WAP6806 in dotted decimal notation. Subnet Mask Enter the subnet mask of the IP alias in dotted decimal notation. Confirm Click Confirm to save your changes. Reset Click Reset to reload the previous configuration for this screen. WAP6806 User’s Guide 61 C HAPTER 12 Wireless LAN 12.1 Overview This chapter discusses how to configure the wireless network settings in your WAP6806. See Section 1.1 on page 9 for an overview of wireless networks. Note: Wireless LAN screens are not available when the WAP6806 is in Client mode. 12.2 What You Can Do • Use the General screen to enable the Wireless LAN (2.4G/5G), enter the SSID and select the HT physical mode (Section 12.4 on page 63). • Use the Advanced screen to set the RTS Threshold and WMM (Section 12.5 on page 65). • Use the Security screen to configure wireless security between the WAP6806 and the wireless clients (Section 12.6 on page 66). • Use the WPS screen to quickly set up a wireless network with strong security, without having to configure security settings manually (Section 12.7 on page 69). 12.3 What You Should Know Every wireless network must follow these basic guidelines. • Every wireless client in the same wireless network must use the same SSID. The SSID is the name of the wireless network. It stands for Service Set IDentity. • If two wireless networks overlap, they should use different channels. Like radio stations or television channels, each wireless network uses a specific channel, or frequency, to send and receive information. • Every wireless client in the same wireless network must use security compatible with the AP. Security stops unauthorized devices from using the wireless network. It can also protect the information that is sent in the wireless network. 12.3.1 Wireless Security Overview The following sections introduce different types of wireless security you can set up in the wireless network. WAP6806 User’s Guide 62 Chapter 12 Wireless LAN 12.3.1.1 Encryption Wireless networks can use encryption to protect the information that is sent in the wireless network. Encryption is like a secret code. If you do not know the secret code, you cannot understand the message. Table 26 Types of Encryption for Each Type of Authentication NO AUTHENTICATION Weakest No Security WEP WPA-Personal Strongest WPA2-Personal For example, if users do not log in to the wireless network, you can choose no authentication, if users do log on to the wireless network, you can choose No Security, WEP, WPA-Personal, or WPA2-Personal. Usually, you should set up the strongest encryption that every wireless client in the wireless network supports. Suppose the wireless network has two wireless clients. Device A only supports WEP, and device B supports WEP and WPA-Personal. Therefore, you should set up WEP in the wireless network. Note: It is recommended that wireless networks use WPA-Personal, or stronger encryption. IEEE 802.1x and WEP encryption are better than none at all, but it is still possible for unauthorized devices to figure out the original information pretty quickly. Many types of encryption use a key to protect the information in the wireless network. The longer the key, the stronger the encryption. Every wireless client in the wireless network must have the same key. 12.3.1.2 WPS Wi-Fi Protected Setup (WPS) is an industry standard specification, defined by the Wi-Fi Alliance. WPS allows you to quickly set up a wireless network with strong security, without having to configure security settings manually. Depending on the devices in your network, you can either press a button (on the device itself, or in its configuration utility) or enter a PIN (Personal Identification Number) in the devices. Then, they connect and set up a secure network by themselves. 12.4 General Wireless LAN Screen Use this screen to enable the Wireless LAN, enter the SSID and select the HT physical mode. Note: If you are configuring the WAP6806 from a computer connected to the wireless LAN and you change the WAP6806’s SSID, channel or security settings, you will lose your wireless connection when you press Confirm. You must then change the wireless settings of your computer to match the WAP6806’s new settings. Click Configuration > Network > WLAN (2.4G/5G) to open the General screen. WAP6806 User’s Guide 63 Chapter 12 Wireless LAN Figure 49 Configuration > Network > WLAN (2.4G) > General Figure 50 Configuration > Network > WLAN (5G) > General The following table describes the general wireless LAN labels in this screen. Table 27 Network > Wireless LAN (2.4G/5G) > General LABEL DESCRIPTION Wireless Network Wireless Network This is turned on by default. Click Disable to turn off the wireless LAN function. WAP6806 User’s Guide 64 Chapter 12 Wireless LAN Table 27 Network > Wireless LAN (2.4G/5G) > General (continued) LABEL DESCRIPTION 802.11 Mode Choose from the following options for 2.4G: • • • • • • Select 802.11b/g Mixed mode to allow IEEE802.11b and IEEE 802.11g compliant WLAN devices to associate with the WAP6806. The transmission rate of yourWAP6806 might be reduced. Select 802.11b Only mode to allow IEEE802.11b compliant WLAN devices to associate with the WAP6806. Select 802.11g Only mode to allow IEEE802.11g compliant WLAN devices to associate with the WAP6806. Select 802.11b/g/n Mixed mode to allow IEEE802.11b, IEEE802.11g and IEEE 802.11n compliant WLAN devices to associate with the WAP6806. The transmission rate of your WAP6806 might be reduced. Select 802.11n Only mode to allow IEEE802.11n compliant WLAN devices to associate with the WAP6806. Select 802.11g/n Mixed mode to allow IEEE802.11g and IEEE 802.11n compliant WLAN devices to associate with the WAP6806. The transmission rate of yourWAP6806 might be reduced. Choose from the following options for 5G: • • Select 802.11a/n Mixed mode to allow IEEE802.11a and IEEE 802.11n compliant WLAN devices to associate with the WAP6806. Select 802.11a/n/ac Mixed mode to allow IEEE802.11a, IEEE 802.11n and IEEE 802.11ac compliant WLAN devices to associate with the WAP6806. Channel Use this field to select the channel number used by this wireless device. SSID The SSID (Service Set IDentity) identifies the Service Set with which a wireless client is associated. Enter a descriptive name (up to 32 printable characters found on a typical English language keyboard) for the wireless LAN. Hide SSID Select this check box to hide the SSID in the outgoing beacon frame so a wireless client cannot obtain the SSID through scanning using a site survey tool. Note: Hise SSID will disable WPS automatically after you click Confirm. AP Isolation AP Isolation is to prevent wireless clients from communicating directly with each other through the WAP6806. Select this check box to enable this function. HT (High Throughput) Physical Mode (for WLAN 2.4G) Bandwidth Select the channel bandwidth you want to use for your wireless network. It is recommended that you select 20/40 MHz. Select 20 MHz if you want you lessen radio interference with other wireless devices in your neighborhood. VHT (Very High Throughput) Option (for WLAN 5G) VHT Bandwidth Select the channel bandwidth you want to use for your wireless network. Confirm Click Confirm to save your changes. Reset Click Reset to reload the previous configuration for this screen. 12.5 Wireless LAN Advanced Screen Use this screen to configure advanced wireless LAN parameters. Click Configuration > Network > Wireless LAN (2.4G/5G) > Advanced. The screen appears as shown. WAP6806 User’s Guide 65 Chapter 12 Wireless LAN Figure 51 Configuration > Network > Wireless LAN (2.4G/5G) > Advanced The following table describes the labels in this screen. Table 28 Configuration > Network > Wireless LAN (2.4G/5G) > Advanced LABEL DESCRIPTION Wireless Advanced Setup Fragmentation Threshold The threshold (number of bytes) for the fragmentation boundary for directed messages. It is the maximum data fragment size that can be sent. Enter an even number between 256 and 2346. RTS Threshold Data with its frame size larger than this value will perform the RTS (Request To Send) handshake. Enter a value between 1 and 2347. Output Power (for 2.4G only) Set the output power of the WAP6806 in this field. If there is a high density of APs in an area, decrease the output power of the WAP6806 to reduce interference with other APs. High - 100% Medium - 50% Low - 25% WMM (Wi-Fi Multimedia) WMM Power Save Select Enable or Disable to activate/inactivate the power save mechanism to save power and fine-tune power consumption. Confirm Click Confirm to save your changes. Reset Click Reset to reload the previous configuration for this screen. 12.6 Security Use this screen to select the wireless security mode. Click Configuration > Network > Wireless LAN (2.4G/5G) > Security to open the Security screen. The screen varies depending on what you select in the Encryption Type. WAP6806 User’s Guide 66 Chapter 12 Wireless LAN Figure 52 Universal Repeater Mode: Wireless LAN (2.4G/5G) > Security (None) Figure 53 Universal Repeater Mode: Wireless LAN (2.4G) > Security (WEP) Figure 54 Universal Repeater Mode: Wireless LAN (2.4G/5G) > Security (WPA) WAP6806 User’s Guide 67 Chapter 12 Wireless LAN The following table describes the labels in this screen. Table 29 Universal Repeater Mode: Wireless LAN (2.4G/5G) > Security LABEL DESCRIPTION Security Encryption Type Use this field to select an encryption mode to protect the information that is sent in the wireless network. None - allows wireless clients to communicate with the AP without any data encryption. WEP (for 2.4G only) Default Key Index Select one key (Key 1-4) as the default. WEP Key 1~4 WEP keys are used to encrypt data. Both the WAP6806 and the wireless stations must use the same WEP key for data transmission. You must configure at least one key, and only one key is activated at one time. ASCII - Select this option to enter ASCII characters as a WEP key. Hex - Select this option to enter hexadecimal characters as a WEP key. WPA-Personal / WPA2-Personal / WPA/PAS2-Personal (WPA-Personal is for 2.4G only) Encryption Select TKIP, AES, or TKIP/AES to enable data encryption. TKIP - Temporal Key Integrity Protocol (TKIP) uses 128-bit keys that are dynamically generated and distributed by the authentication server. AES - Advanced Encryption Standard (AES) is a block cipher that uses a 256-bit mathematical algorithm called Rijndael. TKIP/AES- Supports both TKIP and AES encryption type at the same time. Key WPA-Personal, WPA2-Personal, and WPA/WPA2-Personal Mixed uses a simple common password for authentication. Type a password from 8 to 63 ASCII characters or 64 hexadecimal characters. Group Key Update Timer The Group Key Update Timer is the rate at which the AP sends a new group key out to all clients. The default is 3600 seconds (60 minutes). Access Rule Function This defines the filter action for the list of MAC addresses in the MAC Filter Table. Disable - Select Disable to deactivate the MAC filtering you configure below. Allow - Select Allow to permit access to the WAP6806, MAC addresses not listed will be denied access to the WAP6806. Block - Select Block to block access to the WAP6806, MAC addresses not listed will be allowed to access to the WAP6806. MAC Filter Table The MAC filter table allows you to configure the WAP6806 to give exclusive access to devices (Allow) or exclude devices (Block) from accessing the WAP6806. # - This is the index number of the wireless station. MAC Address - This is the MAC address of the wireless station that is allowed or denied access to the WAP6806. Modify - Click the delete icon to remove the MAC address from the table. Add Enter the MAC addresses of the wireless stations that are allowed or denied access to the WAP6806 in these address fields. Enter the MAC addresses in a valid MAC address format, that is, six hexadecimal character pairs, for example, 12:34:56:78:9a:bc. Confirm Click Confirm to save your changes. Reset Click Reset to reload the previous configuration for this screen. WAP6806 User’s Guide 68 Chapter 12 Wireless LAN 12.7 WPS Screen Use this screen to enable/disable WPS, view or generate a new PIN and check current WPS status. To open this screen, click Configuration > Network > Wireless LAN (2.4G/5G) > WPS tab. Figure 55 Configuration > Network > Wireless LAN (2.4G/5G) > WPS The following table describes the labels in this screen. Table 30 Network > Wireless LAN (2.4G/5G) > WPS LABEL DESCRIPTION WPS Setup WPS Select this to enable or disable the WPS feature. Confirm Click Confirm to save your changes. WPS Setup Configured This displays Yes when the WAP6806 has connected to a wireless network using WPS or when Enable is selected. WPS SSID This displays the network name for the WPS connection. WPS Auth Mode This displays the security protocol selected for the WPS connection. WPS Encryption Type This displays the type of wireless encryption employed by the access point to which you want to connect. Note: This is for Wireless LAN 2.4G only. PIN Code This displays the previous PIN number the system generated. Generate New PIN Click Generate New PIN to have the WAP6806 generate a PIN number. WAP6806 User’s Guide 69 Chapter 12 Wireless LAN Table 30 Network > Wireless LAN (2.4G/5G) > WPS (continued) LABEL DESCRIPTION Release Configuration Click this button to remove all configured wireless and wireless security settings for WPS connections on the WAP6806. WPS Progress WPS Mode Select whether the WAP6806 performs wireless security information synchronization using the PIN configuration method or the Push Button Configuration (PBC) method. PIN Code Type the same PIN number generated in the wireless station’s utility. Confirm Click Confirm to save your changes. WPS Status Status This displays the current WPS process. Idle - It means there is no active WPS. Start WSC Process - The WPS is activated to set up a wireless network. WPS Succeeded - The client is successfully connected with an AP. WSC Failed - The client fails to connect with an AP. Progress This is an indication bar displaying the WPS connecting progress. 12.7.1 Connecting to a Wireless Network Using WPS This section gives you an example of how to set up wireless network using WPS. The following example uses the WAP6806 as the AP and NWD-211AN as the wireless client which connects to a notebook. Note: The wireless client must be a WPS-aware device (for example, a WPS USB adapter or PCI card). The following WPS methods for creating a secure connection are described in the tutorial. • Push Button Configuration (PBC) - create a secure wireless network simply by pressing a button. See Section 12.7.1.1 on page 70.This is the easier method. • PIN Configuration - create a secure wireless network simply by entering a wireless client's PIN (Personal Identification Number) in the WAP6806’s interface. See Section 12.7.1.2 on page 71. This is the more secure method, since one device can authenticate the other. 12.7.1.1 Push Button Configuration (PBC) The push button configuration function found in the interface is only available in AP mode. The WPS button, see Section 1.4 on page 12, can also be used for PBC configurations in either AP or Repeater mode. Make sure that your WAP6806 is turned on and set to work in AP mode and that it is connected to your network. Launch your wireless client’s configuration utility. In the wireless client utility, find the WPS settings. Enable WPS and press the WPS button (Start or WPS button). WAP6806 User’s Guide 70 Chapter 12 Wireless LAN Log into the WAP6806’s Web Configurator. Make sure WPS is enabled in the Configuration > Network > Wireless LAN > WPS screen. Navigate to Configuration > Network > Wireless LAN > WPS and select the PBC. Note: Your WAP6806 has a WPS button located on its panel, as well as a WPS button in its configuration utility. Both buttons have exactly the same function; you can use one or the other. Note: It doesn’t matter which button is pressed first. You must press the second button within two minutes of pressing the first one. The WAP6806 sends the proper configuration settings to the wireless client. This may take up to two minutes. Then the wireless client is able to communicate with the WAP6806 securely. The following figure shows you how to set up wireless network and security by pressing a button on both WAP6806 and wireless client (the NWD-211AN in this example). Figure 56 Example WPS Process: PBC Method AP Wireless Client WITHIN 2 MINUTES SECURITY INFO COMMUNICATION 12.7.1.2 PIN Configuration When you use the PIN configuration method, you need to use both WAP6806’s configuration interface and the client’s utilities. WAP6806 User’s Guide 71 Chapter 12 Wireless LAN The push button configuration function is only available in AP mode. Launch your wireless client’s configuration utility. Go to the WPS Station settings and select the PIN method to get a PIN number. On the WAP6806, navigate to the Network > Wireless LAN (2.4G/5G) > WPS screen. Obtain the PIN number for the WAP6806 or press the Generate New PIN button to create a new PIN number. See Section 12.7 on page 69. Enter the WAP6806 PIN number in the wireless station’s utility screen. The WAP6806 authenticates the wireless client and sends the proper configuration settings to the wireless client. This may take up to two minutes. Then the wireless client is able to communicate with the WAP6806 securely. The following figure shows an example of how to set up wireless network and security on WAP6806 and wireless client (ex. NWD210N in this example) by using PIN method. WAP6806 User’s Guide 72 Chapter 12 Wireless LAN Figure 57 Example WPS Process: PIN Method Wireless Client 14066084 2532751 WITHIN 2 MINUTES Authentication by PIN SECURITY INFO COMMUNICATION WAP6806 User’s Guide 73 C HAPTER 13 Management 13.1 Overview This chapter provides information on the Management screens. 13.2 What You Can Do • Use the MCL screen (Section 13.3 on page 74) to enable or disable services access to the WAP6806. • Use the One Connect screen (Section 13.4 on page 75) to enable or disable the One Connect configuration. 13.3 MCL Screen Use this screen to enable or disable services access to the WAP6806. Click Configuration > Management > MCL. The following screen displays. Figure 58 Configuration > Management > MCL The following table describes the labels in this screen. Table 31 Maintenance > General LABEL DESCRIPTION Service Control List This is the index number of the service. Service Name This displays the service name. Enable Select Enable to allow the service to access the WAP6806. Apply Click Apply to save your changes. WAP6806 User’s Guide 74 Chapter 13 Management 13.4 One Connect Screen ZyXEL One Connect app is an easy tool to manage, monitor, and synchronize wireless settings through your mobile devices, such as adding a wireless AP or powerline adapters, configuring guest Wi-Fi settings, or checking the network connection quality, and more. You can apply One Connect to integrate all devices in your home, and don’t have turn on your computer or do redundant settings on each network device. The WAP6806 supports two features through One Connect: • Network Map to overview your home network: With ZyXEL One connect, you can easily and quickly view your connected devices on the network. Change Wi-Fi settings to the home router from the app and realize the utilization of internet bandwidth or even reboot the router if needed. • Wi-Fi setting synchronization: The WAP6806 can automatically synchronize the Wi-Fi settings from the One Connect router. Click Configuration > Management > One Connect. Figure 59 Configuration > Management > One Connect The following table describes the labels in this screen. Table 32 Configuration > Management > One Connect LABEL DESCRIPTION Auto-Configuration Select Enable or Disable to activate/inactivate the One Connect function. Confirm Click Confirm to save your changes. Reset Click Reset to reload the previous configuration for this screen. WAP6806 User’s Guide 75 C HAPTER 14 Maintenance 14.1 Overview This chapter provides information on the Maintenance screen. 14.2 What You Can Do • Use the System screens to set the password and configure time and date of your WAP6806 (Section 14.3 on page 76). • Use the Firmware Upgrade screen to update firmware (Section 14.4 on page 78). • Use the Backup/Restore screen to backup and restore device configurations (Section 14.5 on page 80). • Use the Reboot screen to restart your WAP6806 (Section 14.6 on page 82). 14.3 System Use the System screens to set the password and configure time and date of your WAP6806. 14.3.1 General Screen It is strongly recommended that you change your WAP6806’s password. Use this screen to set the web configurator password. Click Maintenance > System > General. The following screen displays. Figure 60 Maintenance > System > General WAP6806 User’s Guide 76 Chapter 14 Maintenance The following table describes the labels in this menu. Table 33 Maintenance > System > General LABEL DESCRIPTION Old Password Type the default password or the existing password you use to access the system in this field. New Password Type your new system password (up to 30 characters). Confirm New Password Type the new password again in this field. Confirm Click Confirm to save your changes. Reset Click Reset to reload the previous configuration for this screen. 14.3.2 Time Setting Screen Use this screen to configure the WAP6806’s time based on your local time zone. To change your WAP6806’s time and date, click Maintenance > System > Time Setting. The screen appears as shown. Figure 61 Maintenance > System > Time Setting The following table describes the labels in this menu. Table 34 Maintenance > System > Time Setting LABEL DESCRIPTION Current Time and Date Current Time This field displays the current time and date of your WAP6806. NTP Server NTP Server IP Address 1 Enter the IP address or URL of an available time server and synchronize the date and time with the time server. NTP Server IP Address 2 Enter the IP address or URL of an available time server and synchronize the date and time with the time server. Time Zone Setting WAP6806 User’s Guide 77 Chapter 14 Maintenance Table 34 Maintenance > System > Time Setting (continued) LABEL DESCRIPTION Time Zone Choose the time zone of your location. This will set the time difference between your time zone and Greenwich Mean Time (GMT). Daylight Saving Daylight Saving Daylight saving is a period from late spring to fall when many countries set their clocks ahead of normal local time by one hour to give more daytime light in the evening. Select Enable if you use Daylight Saving Time. Start Day Configure the date when Daylight Saving Time starts. End Day Configure the date when Daylight Saving Time ends. Confirm Click Confirm to save your changes. Reset Click Reset to reload the previous configuration for this screen. 14.4 Firmware Upgrade Screen Find firmware at www.zyxel.com in a file that (usually) uses the system model name with a “*.bin” extension, e.g., “WAP6806.bin”. The upload process uses HTTP (Hypertext Transfer Protocol) and may take up to two minutes. After a successful upload, the system will reboot. Click Maintenance > Firmware Upgrade. Follow the instructions in this screen to upgrade firmware to your WAP6806. Figure 62 Maintenance > Firmware Upgrade The following table describes the labels in this screen. Table 35 Maintenance > Firmware Upgrade LABEL DESCRIPTION Firmware Upgrade Choose File Click Choose File to find the .bin file you want to upload. Remember that you must decompress compressed (.zip) files before you can upload them. Online Firmware Upgrade WAP6806 User’s Guide 78 Chapter 14 Maintenance Table 35 Maintenance > Firmware Upgrade (continued) LABEL DESCRIPTION Check for Latest Firmware Now The following fields display when you click this button. Current Firmware Version The firmware version consists of the trunk version number, model code, and release number. For example, V1.00(ABAL.0) means V1.00 is the trunk number, ABAL represents WAP6806, and 0 means the fifth release. The Newest Firmware Version Compare the release number in the previous field with the release number in this one to see if you have the latest firmware. In this example, V1.00(ABAL.0), the numbers are the same (0), so the WAP6806 already has the latest firmware. If the current firmware version is not the same as the newest firmware version, click Upgrade to upgrade the firmware. The Release Note for This Version The release note shows what has changed (new features, bug fixes, known issues) in this firmware version. Check Read before deciding to use new firmware. Upgrade Click this button to download and upgrade the new firmware to the WAP6806. If the WAP6806 cannot connect to the online server, the screen displays as below. If the firmware version of your WAP6806 is not the latest one, the screen displays as below. Note: Do not turn off the WAP6806 while firmware upload is in progress! After you see the Firmware Upgrading screen, wait until the upgrade process is complete. WAP6806 User’s Guide 79 Chapter 14 Maintenance Figure 63 Firmware Upgrading The WAP6806 automatically restarts in this time causing a temporary network disconnect. In some operating systems, you may see the following icon on your desktop. Figure 64 Network Temporarily Disconnected After the WAP6806 restarts, the Upgrade Accomplished screen appears. Figure 65 Upgrade Accomplished Refresh the web page and log in again and check your new firmware version in the Status screen. 14.5 Backup / Restore Screen Click Maintenance > Backup/Restore. Information related to factory defaults, backup configuration, and restoring configuration appears as shown next. WAP6806 User’s Guide 80 Chapter 14 Maintenance Figure 66 Maintenance > Backup/Restore 14.5.1 Export Setting Export setting allows you to back up (save) the WAP6806’s current configuration to a file on your computer. Once your WAP6806 is configured and functioning properly, it is highly recommended that you back up your configuration file before making configuration changes. The backup configuration file will be useful in case you need to return to your previous settings. Click Export to save the WAP6806’s current configuration to your computer. 14.5.2 Import Setting Import setting allows you to upload a new or previously saved configuration file from your computer to your WAP6806. Table 36 Maintenance Restore Configuration LABEL DESCRIPTION Browse... Click Browse... to find the file you want to upload. Remember that you must decompress compressed (.ZIP) files before you can upload them. Import Click Import to begin the import process. Note: Do not turn off the WAP6806 while configuration file import is in progress. After you see a “configuration upload successful” screen, you must then wait one minute before logging into the WAP6806 again. The WAP6806 automatically restarts in this time causing a temporary network disconnect. In some operating systems, you may see the following icon on your desktop. Figure 67 Temporarily Disconnected If you uploaded the default configuration file you may need to change the IP address of your computer to be in the same subnet as that of the default WAP6806 IP address (192.168.1.2). Refer to your operating system’s help files for details on how to set up your computer’s IP address. WAP6806 User’s Guide 81 Chapter 14 Maintenance 14.5.3 Restore to Factory Defaults Click Reset to clear all user-entered configuration information and returns the WAP6806 to its factory defaults. You can also press the Reset button on the rear panel to reset the factory defaults of your WAP6806. 14.6 Reboot System reboot allows you to restart the WAP6806 without turning the power off. Click Maintenance > Reboot to open the following screen. Figure 68 Maintenance > Reboot Click Restart to have the WAP6806 reboot. This does not affect the WAP6806’s configuration. WAP6806 User’s Guide 82 C HAPTER 15 Troubleshooting This chapter offers some suggestions to solve problems you might encounter. The potential problems are divided into the following categories. • Power, Hardware Connections, and LED • WAP6806 Access and Login • Internet Access • Resetting the WAP6806 to Its Factory Defaults • Wireless Problems 15.1 Power, Hardware Connections, and LED The WAP6806 does not turn on. The LED does not turn on. Make sure the WAP6806 is plugged in to an appropriate power source. Make sure the power source is turned on. Disconnect and re-connect the power adaptor or cord to the WAP6806. If the problem continues, contact the vendor. The LED does not behave as expected. Make sure you understand the normal behavior of the LED. See Table 1 on page 11. Check the hardware connections. See the Quick Start Guide. Inspect your cables for damage. Contact the vendor to replace any damaged cables. Disconnect and re-connect the power adaptor to the WAP6806. If the problem continues, contact the vendor. WAP6806 User’s Guide 83 Chapter 15 Troubleshooting 15.2 WAP6806 Access and Login I forgot the password. The default password is 1234. If this does not work, you have to reset the device to its factory defaults. See Section 14.5.3 on page 82. I cannot see or access the Login screen in the Web Configurator. Make sure you are using the correct address. • The default web address (URL) of the WAP6806 is http://zyxelsetup or http:// 192.168.1.2. Check the hardware connections, and make sure the LEDs are behaving as expected. See the Quick Start Guide. Make sure your Internet browser does not block pop-up windows and has JavaScript and Java enabled. Reset the device to its factory defaults, and try to access the WAP6806 with the default address. If the problem continues, contact the network administrator or vendor, or try one of the advanced suggestions. Advanced Suggestions • If your computer is connected wirelessly, use a computer that is connected to a ETHERNET port. I can see the Login screen, but I cannot log in to the WAP6806. Make sure you have entered the password correctly. The default password is 1234. This can happen when you fail to log out properly from your last session. Try logging in again after 5 minutes. Disconnect and re-connect the power adaptor or cord to the WAP6806. If this does not work, you have to reset the device to its factory defaults. See Section 15.4 on page 86. WAP6806 User’s Guide 84 Chapter 15 Troubleshooting 15.3 Internet Access I cannot access the Internet. Check the hardware connections, and make sure the LEDs are behaving as expected. See the Quick Start Guide. Try to connect directly to the AP. If you can access the Internet, check that the WAP6806 has associated with the AP by checking the WLAN STA Information SSID field shows the SSID of the AP. See Section 12.4 on page 63. If you are trying to access the Internet wirelessly, make sure the wireless settings in the wireless client are the same as the settings in the AP. Disconnect all the cables from your device, and follow the directions in the Quick Start Guide again. If the problem continues, contact your ISP. I cannot access the Internet anymore. I had access to the Internet (with the WAP6806), but my Internet connection is not available anymore. Check the hardware connections, and make sure the LEDs are behaving as expected. See the Quick Start Guide and Table 1 on page 11. Reboot the WAP6806. Try to connect directly to the AP. If you can access the Internet, check that the WAP6806 has associated with the AP by checking the WLAN STA Information SSID field shows the SSID of the AP. See Section 12.4 on page 63. If the problem continues, contact your ISP. The Internet connection is slow or intermittent. There might be a lot of traffic on the network. Look at the LEDs, and check Table 2 on page 11. If the WAP6806 is sending or receiving a lot of information, try closing some programs that use the Internet, especially peer-to-peer applications. Check the signal strength. If the signal strength is low, try moving the WAP6806 closer to the AP if possible, and look around to see if there are any devices that might be interfering with the wireless network (for example, microwaves, other wireless networks, and so on). Reboot the WAP6806. WAP6806 User’s Guide 85 Chapter 15 Troubleshooting If the problem continues, contact the network administrator or vendor, or try one of the advanced suggestions. Advanced Suggestion • Check the settings for QoS. If it is disabled, you might consider activating it. 15.4 Resetting the WAP6806 to Its Factory Defaults If you reset the WAP6806, you lose all of the changes you have made. The WAP6806 re-loads its default settings, and the password resets to 1234. You have to make all of your changes again. You will lose all of your changes when you reset the WAP6806 to its factory defaults. To reset the WAP6806, Make sure the power LED is on. Press the RESET button for longer than 10 seconds, the Power LED begins to blink, to set the WAP6806 back to its factory-default configuration. OR Click Maintenance > Backup/Restore > Restore and then click Reset. If the WAP6806 restarts automatically, wait for the WAP6806 to finish restarting, and log in to the Web Configurator. The password is 1234. If the WAP6806 does not restart automatically, disconnect and reconnect the WAP6806’s power. Then, follow the directions above again. 15.5 Wireless Problems I cannot access the WAP6806 or ping any computer from the WLAN. Make sure the wireless LAN is enabled on the WAP6806. Make sure the wireless adapter on the wireless station is working properly. Make sure the wireless adapter installed on your computer is IEEE 802.11 compatible and supports the same wireless standard as the WAP6806. Make sure your computer (with a wireless adapter installed) is within the transmission range of the WAP6806. WAP6806 User’s Guide 86 Chapter 15 Troubleshooting Check that both the WAP6806 and your wireless station are using the same wireless and wireless security settings, and that both the WAP6806 and the AP are using the same wireless and wireless security settings. WAP6806 User’s Guide 87 A PPENDIX Customer Support In the event of problems that cannot be solved by using this manual, you should contact your vendor. If you cannot contact your vendor, then contact a ZyXEL office for the region in which you bought the device. See http://www.zyxel.com/homepage.shtml and also http://www.zyxel.com/about_zyxel/zyxel_worldwide.shtml for the latest information. Please have the following information ready when you contact an office. Required Information • Product model and serial number. • Warranty Information. • Date that you received your device. • Brief description of the problem and the steps you took to solve it. Corporate Headquarters (Worldwide) Taiwan • ZyXEL Communications Corporation • http://www.zyxel.com Asia China • ZyXEL Communications (Shanghai) Corp. ZyXEL Communications (Beijing) Corp. ZyXEL Communications (Tianjin) Corp. • http://www.zyxel.cn India • ZyXEL Technology India Pvt Ltd • http://www.zyxel.in Kazakhstan • ZyXEL Kazakhstan VMG1312-B Series User’s Guide 88 Appendix A Customer Support • http://www.zyxel.kz Korea • ZyXEL Korea Corp. • http://www.zyxel.kr Malaysia • ZyXEL Malaysia Sdn Bhd. • http://www.zyxel.com.my Pakistan • ZyXEL Pakistan (Pvt.) Ltd. • http://www.zyxel.com.pk Philippines • ZyXEL Philippines • http://www.zyxel.com.ph Singapore • ZyXEL Singapore Pte Ltd. • http://www.zyxel.com.sg Taiwan • ZyXEL Communications Corporation • http://www.zyxel.com/tw/zh/ Thailand • ZyXEL Thailand Co., Ltd • http://www.zyxel.co.th Vietnam • ZyXEL Communications Corporation-Vietnam Office • http://www.zyxel.com/vn/vi Europe Austria • ZyXEL Deutschland GmbH • http://www.zyxel.de VMG1312-B Series User’s Guide 89 Appendix A Customer Support Belarus • ZyXEL BY • http://www.zyxel.by Belgium • ZyXEL Communications B.V. • http://www.zyxel.com/be/nl/ • http://www.zyxel.com/be/fr/ Bulgaria • ZyXEL България • http://www.zyxel.com/bg/bg/ Czech Republic • ZyXEL Communications Czech s.r.o • http://www.zyxel.cz Denmark • ZyXEL Communications A/S • http://www.zyxel.dk Estonia • ZyXEL Estonia • http://www.zyxel.com/ee/et/ Finland • ZyXEL Communications • http://www.zyxel.fi France • ZyXEL France • http://www.zyxel.fr Germany • ZyXEL Deutschland GmbH • http://www.zyxel.de Hungary • ZyXEL Hungary & SEE • http://www.zyxel.hu VMG1312-B Series User’s Guide 90 Appendix A Customer Support Italy • ZyXEL Communications Italy • http://www.zyxel.it/ Latvia • ZyXEL Latvia • http://www.zyxel.com/lv/lv/homepage.shtml Lithuania • ZyXEL Lithuania • http://www.zyxel.com/lt/lt/homepage.shtml Netherlands • ZyXEL Benelux • http://www.zyxel.nl Norway • ZyXEL Communications • http://www.zyxel.no Poland • ZyXEL Communications Poland • http://www.zyxel.pl Romania • ZyXEL Romania • http://www.zyxel.com/ro/ro Russia • ZyXEL Russia • http://www.zyxel.ru Slovakia • ZyXEL Communications Czech s.r.o. organizacna zlozka • http://www.zyxel.sk Spain • ZyXEL Communications ES Ltd • http://www.zyxel.es Sweden • ZyXEL Communications VMG1312-B Series User’s Guide 91 Appendix A Customer Support • http://www.zyxel.se Switzerland • Studerus AG • http://www.zyxel.ch/ Turkey • ZyXEL Turkey A.S. • http://www.zyxel.com.tr UK • ZyXEL Communications UK Ltd. • http://www.zyxel.co.uk Ukraine • ZyXEL Ukraine • http://www.ua.zyxel.com Latin America Argentina • ZyXEL Communication Corporation • http://www.zyxel.com/ec/es/ Brazil • ZyXEL Communications Brasil Ltda. • https://www.zyxel.com/br/pt/ Ecuador • ZyXEL Communication Corporation • http://www.zyxel.com/ec/es/ Middle East Israel • ZyXEL Communication Corporation • http://il.zyxel.com/homepage.shtml Middle East • ZyXEL Communication Corporation VMG1312-B Series User’s Guide 92 Appendix A Customer Support • http://www.zyxel.com/me/en/ North America USA • ZyXEL Communications, Inc. - North America Headquarters • http://www.zyxel.com/us/en/ Oceania Australia • ZyXEL Communications Corporation • http://www.zyxel.com/au/en/ Africa South Africa • Nology (Pty) Ltd. • http://www.zyxel.co.za VMG1312-B Series User’s Guide 93 A PPENDIX Setting Up Your Computer’s IP Address Note: Your specific WAP6806 may not support all of the operating systems described in this appendix. See the product specifications for more information about which operating systems are supported. This appendix shows you how to configure the IP settings on your computer in order for it to be able to communicate with the other devices on your network. Windows Vista/XP/2000, Mac OS 9/ OS X, and all versions of UNIX/LINUX include the software components you need to use TCP/IP on your computer. If you manually assign IP information instead of using a dynamic IP, make sure that your network’s computers have IP addresses that place them in the same subnet. In this appendix, you can set up an IP address for: • Windows XP/NT/2000 on page 94 • Windows Vista on page 98 • Windows 7 on page 102 • Mac OS X: 10.3 and 10.4 on page 106 • Mac OS X: 10.5 and 10.6 on page 109 • Linux: Ubuntu 8 (GNOME) on page 112 • Linux: openSUSE 10.3 (KDE) on page 116 Windows XP/NT/2000 The following example uses the default Windows XP display theme but can also apply to Windows 2000 and Windows NT. Click Start > Control Panel. WAP6806 User’s Guide 94 Appendix B Setting Up Your Computer’s IP Address In the Control Panel, click the Network Connections icon. Right-click Local Area Connection and then select Properties. On the General tab, select Internet Protocol (TCP/IP) and then click Properties. WAP6806 User’s Guide 95 Appendix B Setting Up Your Computer’s IP Address The Internet Protocol TCP/IP Properties window opens. WAP6806 User’s Guide 96 Appendix B Setting Up Your Computer’s IP Address Select Obtain an IP address automatically if your network administrator or ISP assigns your IP address dynamically. Select Use the following IP Address and fill in the IP address, Subnet mask, and Default gateway fields if you have a static IP address that was assigned to you by your network administrator or ISP. You may also have to enter a Preferred DNS server and an Alternate DNS server, if that information was provided. Click OK to close the Internet Protocol (TCP/IP) Properties window. Click OK to close the Local Area Connection Properties window. Verifying Settings Click Start > All Programs > Accessories > Command Prompt. In the Command Prompt window, type "ipconfig" and then press [ENTER]. You can also go to Start > Control Panel > Network Connections, right-click a network connection, click Status and then click the Support tab to view your IP address and connection information. WAP6806 User’s Guide 97 Appendix B Setting Up Your Computer’s IP Address Windows Vista This section shows screens from Windows Vista Professional. Click Start > Control Panel. In the Control Panel, click the Network and Internet icon. Click the Network and Sharing Center icon. Click Manage network connections. WAP6806 User’s Guide 98 Appendix B Setting Up Your Computer’s IP Address Right-click Local Area Connection and then select Properties. Note: During this procedure, click Continue whenever Windows displays a screen saying that it needs your permission to continue. Select Internet Protocol Version 4 (TCP/IPv4) and then select Properties. WAP6806 User’s Guide 99 Appendix B Setting Up Your Computer’s IP Address The Internet Protocol Version 4 (TCP/IPv4) Properties window opens. WAP6806 User’s Guide 100 Appendix B Setting Up Your Computer’s IP Address Select Obtain an IP address automatically if your network administrator or ISP assigns your IP address dynamically. Select Use the following IP Address and fill in the IP address, Subnet mask, and Default gateway fields if you have a static IP address that was assigned to you by your network administrator or ISP. You may also have to enter a Preferred DNS server and an Alternate DNS server, if that information was provided.Click Advanced. Click OK to close the Internet Protocol (TCP/IP) Properties window. 10 Click OK to close the Local Area Connection Properties window. Verifying Settings Click Start > All Programs > Accessories > Command Prompt. In the Command Prompt window, type "ipconfig" and then press [ENTER]. You can also go to Start > Control Panel > Network Connections, right-click a network connection, click Status and then click the Support tab to view your IP address and connection information. WAP6806 User’s Guide 101 Appendix B Setting Up Your Computer’s IP Address Windows 7 This section shows screens from Windows 7 Enterprise. Click Start > Control Panel. In the Control Panel, click View network status and tasks under the Network and Internet category. Click Change adapter settings. Double click Local Area Connection and then select Properties. WAP6806 User’s Guide 102 Appendix B Setting Up Your Computer’s IP Address Note: During this procedure, click Continue whenever Windows displays a screen saying that it needs your permission to continue. Select Internet Protocol Version 4 (TCP/IPv4) and then select Properties. WAP6806 User’s Guide 103 Appendix B Setting Up Your Computer’s IP Address The Internet Protocol Version 4 (TCP/IPv4) Properties window opens. WAP6806 User’s Guide 104 Appendix B Setting Up Your Computer’s IP Address Select Obtain an IP address automatically if your network administrator or ISP assigns your IP address dynamically. Select Use the following IP Address and fill in the IP address, Subnet mask, and Default gateway fields if you have a static IP address that was assigned to you by your network administrator or ISP. You may also have to enter a Preferred DNS server and an Alternate DNS server, if that information was provided. Click Advanced if you want to configure advanced settings for IP, DNS and WINS. Click OK to close the Internet Protocol (TCP/IP) Properties window. Click OK to close the Local Area Connection Properties window. Verifying Settings Click Start > All Programs > Accessories > Command Prompt. In the Command Prompt window, type "ipconfig" and then press [ENTER]. The IP settings are displayed as follows. WAP6806 User’s Guide 105 Appendix B Setting Up Your Computer’s IP Address Mac OS X: 10.3 and 10.4 The screens in this section are from Mac OS X 10.4 but can also apply to 10.3. Click Apple > System Preferences. In the System Preferences window, click the Network icon. WAP6806 User’s Guide 106 Appendix B Setting Up Your Computer’s IP Address When the Network preferences pane opens, select Built-in Ethernet from the network connection type list, and then click Configure. For dynamically assigned settings, select Using DHCP from the Configure IPv4 list in the TCP/IP tab. WAP6806 User’s Guide 107 Appendix B Setting Up Your Computer’s IP Address For statically assigned settings, do the following: • From the Configure IPv4 list, select Manually. • In the IP Address field, type your IP address. • In the Subnet Mask field, type your subnet mask. • In the Router field, type the IP address of your device. Click Apply Now and close the window. Verifying Settings Check your TCP/IP properties by clicking Applications > Utilities > Network Utilities, and then selecting the appropriate Network Interface from the Info tab. WAP6806 User’s Guide 108 Appendix B Setting Up Your Computer’s IP Address Figure 69 Mac OS X 10.4: Network Utility Mac OS X: 10.5 and 10.6 The screens in this section are from Mac OS X 10.5 but can also apply to 10.6. Click Apple > System Preferences. In System Preferences, click the Network icon. WAP6806 User’s Guide 109 Appendix B Setting Up Your Computer’s IP Address When the Network preferences pane opens, select Ethernet from the list of available connection types. From the Configure list, select Using DHCP for dynamically assigned settings. For statically assigned settings, do the following: • From the Configure list, select Manually. • In the IP Address field, enter your IP address. WAP6806 User’s Guide 110 Appendix B Setting Up Your Computer’s IP Address • In the Subnet Mask field, enter your subnet mask. • In the Router field, enter the IP address of your WAP6806. Click Apply and close the window. Verifying Settings Check your TCP/IP properties by clicking Applications > Utilities > Network Utilities, and then selecting the appropriate Network interface from the Info tab. WAP6806 User’s Guide 111 Appendix B Setting Up Your Computer’s IP Address Figure 70 Mac OS X 10.5: Network Utility Linux: Ubuntu 8 (GNOME) This section shows you how to configure your computer’s TCP/IP settings in the GNU Object Model Environment (GNOME) using the Ubuntu 8 Linux distribution. The procedure, screens and file locations may vary depending on your specific distribution, release version, and individual configuration. The following screens use the default Ubuntu 8 installation. Note: Make sure you are logged in as the root administrator. Follow the steps below to configure your computer IP address in GNOME: Click System > Administration > Network. When the Network Settings window opens, click Unlock to open the Authenticate window. (By default, the Unlock button is greyed out until clicked.) You cannot make changes to your configuration unless you first enter your admin password. WAP6806 User’s Guide 112 Appendix B Setting Up Your Computer’s IP Address In the Authenticate window, enter your admin account name and password then click the Authenticate button. In the Network Settings window, select the connection that you want to configure, then click Properties. WAP6806 User’s Guide 113 Appendix B Setting Up Your Computer’s IP Address The Properties dialog box opens. • In the Configuration list, select Automatic Configuration (DHCP) if you have a dynamic IP address. • In the Configuration list, select Static IP address if you have a static IP address. Fill in the IP address, Subnet mask, and Gateway address fields. Click OK to save the changes and close the Properties dialog box and return to the Network Settings screen. If you know your DNS server IP address(es), click the DNS tab in the Network Settings window and then enter the DNS server information in the fields provided. WAP6806 User’s Guide 114 Appendix B Setting Up Your Computer’s IP Address Click the Close button to apply the changes. Verifying Settings Check your TCP/IP properties by clicking System > Administration > Network Tools, and then selecting the appropriate Network device from the Devices tab. The Interface Statistics column shows data if your connection is working properly. WAP6806 User’s Guide 115 Appendix B Setting Up Your Computer’s IP Address Figure 71 Ubuntu 8: Network Tools Linux: openSUSE 10.3 (KDE) This section shows you how to configure your computer’s TCP/IP settings in the K Desktop Environment (KDE) using the openSUSE 10.3 Linux distribution. The procedure, screens and file locations may vary depending on your specific distribution, release version, and individual configuration. The following screens use the default openSUSE 10.3 installation. Note: Make sure you are logged in as the root administrator. Follow the steps below to configure your computer IP address in the KDE: Click K Menu > Computer > Administrator Settings (YaST). WAP6806 User’s Guide 116 Appendix B Setting Up Your Computer’s IP Address When the Run as Root - KDE su dialog opens, enter the admin password and click OK. When the YaST Control Center window opens, select Network Devices and then click the Network Card icon. WAP6806 User’s Guide 117 Appendix B Setting Up Your Computer’s IP Address When the Network Settings window opens, click the Overview tab, select the appropriate connection Name from the list, and then click the Configure button. When the Network Card Setup window opens, click the Address tab WAP6806 User’s Guide 118 Appendix B Setting Up Your Computer’s IP Address Figure 72 openSUSE 10.3: Network Card Setup Select Dynamic Address (DHCP) if you have a dynamic IP address. Select Statically assigned IP Address if you have a static IP address. Fill in the IP address, Subnet mask, and Hostname fields. Click Next to save the changes and close the Network Card Setup window. If you know your DNS server IP address(es), click the Hostname/DNS tab in Network Settings and then enter the DNS server information in the fields provided. WAP6806 User’s Guide 119 Appendix B Setting Up Your Computer’s IP Address Click Finish to save your settings and close the window. Verifying Settings Click the KNetwork Manager icon on the Task bar to check your TCP/IP properties. From the Options sub-menu, select Show Connection Information. Figure 73 openSUSE 10.3: KNetwork Manager When the Connection Status - KNetwork Manager window opens, click the Statistics tab to see if your connection is working properly. WAP6806 User’s Guide 120 Appendix B Setting Up Your Computer’s IP Address Figure 74 openSUSE: Connection Status - KNetwork Manager WAP6806 User’s Guide 121 A PPENDIX Legal Information Copyright Copyright © 2015 by ZyXEL Communications Corporation. The contents of this publication may not be reproduced in any part or as a whole, transcribed, stored in a retrieval system, translated into any language, or transmitted in any form or by any means, electronic, mechanical, magnetic, optical, chemical, photocopying, manual, or otherwise, without the prior written permission of ZyXEL Communications Corporation. Published by ZyXEL Communications Corporation. All rights reserved. Disclaimer ZyXEL does not assume any liability arising out of the application or use of any products, or software described herein. Neither does it convey any license under its patent rights nor the patent rights of others. ZyXEL further reserves the right to make changes in any products described herein without notice. This publication is subject to change without notice. Regulatory Notice and Statement UNITED STATEs of AMERICA The following information applies if you use the product within USA area. FCC EMC Statement • This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. • Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the device. • This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. • If this device does cause harmful interference to radio or television reception, which is found by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment or devices. Connect the device to an outlet other than the receiver's. Consult a dealer or an experienced radio/TV technician for assistance. FCC Radiation Exposure Statement • • This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must be at least 20 cm from the user and must not be co-located or operating in conjunction with any other antenna or transmitter. CANADA The following information applies if you use the product within Canada area. Industry Canada ICES statement CAN ICES-3 (B)/NMB-3(B) WAP6806 User’s Guide 122 Appendix C Legal Information Industry Canada RSS-GEN & RSS-247 statement • • This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This radio transmitter (2468C-NBG6815) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Antenna Information TYPE MANUFACTURER GAIN CONNECTOR If the product with 5G wireless function operating in 5150-5250 MHz and 5725-5850 MHz, the following attention must be paid. • The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to cochannel mobile satellite systems. • For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the device still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate; and • The worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement sent forth in Section 6.2.2(3) of RSS 247 shall be clearly indicated. In the product with 5G wireless function operating in 5250-5350 MHz and 5470-5725 MHz, the following attention must be paid. • For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 54705725 MHz shall be such that the device still complies with the e.i.r.p. limit. • Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. • Le présent émetteur radio (2468C-NBG6815) de modèle s'il fait partie du matériel de catégorieI) a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal et l'impédance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur. Informations Antenne TYPE FABRICANT GAIN CONNECTEUR Lorsque la fonction sans fil 5G fonctionnant en 5150-5250 MHz et 5725-5850 MHz est activée pour ce produit, il est nécessaire de porter une attention particulière aux choses suivantes. • Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les même canaux. • Pour les dispositifs munis d’antennes amovibles, le gain maximal d’antenne permis (pour les dispositifs utilisant la bande de 5725 à 5850 MHz) doit être conforme à la limite de la p.i.r.e. spécifiée pour l’exploitation point à point et l’exploitation non point à point, selon le cas. • Les pires angles d’inclinaison nécessaires pour rester conforme à l’exigence de la p.i.r.e. applicable au masque d’élévation, et énoncée à la section 6.2.2 3) du CNR-247, doivent être clairement indiqués. Lorsque la fonction sans fil 5G fonctionnant en 5250-5350 MHz et 5470-5725 MHz est activée pour ce produit, il est nécessaire de porter une attention particulière aux choses suivantes. • Pour les dispositifs munis d’antennes amovibles, le gain maximal d’antenne permis pour les dispositifs utilisant les bandes de 5250 à 5350 MHz et de 5470 à 5725 MHz doit être conforme à la limite de la p.i.r.e. Industry Canada radiation exposure statement This device complies with IC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with a minimum distance of 20cm between the radiator and your body. Déclaration d’exposition aux radiations: Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. EUROPEAN UNION The following information applies if you use the product within the European Union. WAP6806 User’s Guide 123 Appendix C Legal Information Declaration of Conformity with Regard to EU Directive 1999/5/EC (R&TTE Directive) Compliance information for 2.4GHz and/or 5GHz wireless products relevant to the EU and other Countries following the EU Directive 1999/ 5/EC (R&TTE). • Български (Bulgarian) С настоящото ZyXEL декларира, че това оборудване е в съответствие със съществените изисквания и другите приложими разпоредбите на Директива 1999/5/ЕC. Español (Spanish) Por medio de la presente ZyXEL declara que el equipo cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. Čeština (Czech) ZyXEL tímto prohlašuje, že tento zařízení je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/EC. Dansk (Danish) Undertegnede ZyXEL erklærer herved, at følgende udstyr udstyr overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF. Deutsch (German) Hiermit erklärt ZyXEL, dass sich das Gerät Ausstattung in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EU befindet. Eesti keel (Estonian) Käesolevaga kinnitab ZyXEL seadme seadmed vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele. Ελληνικά (Greek) ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ ZyXEL ∆ΗΛΩΝΕΙ ΟΤΙ εξοπλισμός ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩ∆ΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ∆ΙΑΤΑΞΕΙΣ ΤΗΣ Ο∆ΗΓΙΑΣ 1999/5/ΕC. English Hereby, ZyXEL declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Français (French) Par la présente ZyXEL déclare que l'appareil équipements est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/EC. Hrvatski (Croatian) ZyXEL ovime izjavljuje da je radijska oprema tipa u skladu s Direktivom 1999/5/EC. Íslenska (Icelandic) Hér með lýsir, ZyXEL því yfir að þessi búnaður er í samræmi við grunnkröfur og önnur viðeigandi ákvæði tilskipunar 1999/5/EC. Italiano (Italian) Con la presente ZyXEL dichiara che questo attrezzatura è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Latviešu valoda (Latvian) Ar šo ZyXEL deklarē, ka iekārtas atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem. Lietuvių kalba (Lithuanian) Šiuo ZyXEL deklaruoja, kad šis įranga atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Magyar (Hungarian) Alulírott, ZyXEL nyilatkozom, hogy a berendezés megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EK irányelv egyéb elõírásainak. Malti (Maltese) Hawnhekk, ZyXEL, jiddikjara li dan tagħmir jikkonforma mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li hemm fid-Dirrettiva 1999/5/EC. Nederlands (Dutch) Hierbij verklaart ZyXEL dat het toestel uitrusting in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EC. Polski (Polish) Niniejszym ZyXEL oświadcza, że sprzęt jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC. Português (Portuguese) ZyXEL declara que este equipamento está conforme com os requisitos essenciais e outras disposições da Directiva 1999/5/EC. Română (Romanian) Prin prezenta, ZyXEL declară că acest echipament este în conformitate cu cerinţele esenţiale şi alte prevederi relevante ale Directivei 1999/5/EC. Slovenčina (Slovak) ZyXEL týmto vyhlasuje, že zariadenia spĺňa základné požiadavky a všetky príslušné ustanovenia Smernice 1999/5/EC. Slovenščina (Slovene) ZyXEL izjavlja, da je ta oprema v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/EC. Suomi (Finnish) ZyXEL vakuuttaa täten että laitteet tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen. Svenska (Swedish) Härmed intygar ZyXEL att denna utrustning står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EC. Norsk (Norwegian) Erklærer herved ZyXEL at dette utstyret er I samsvar med de grunnleggende kravene og andre relevante bestemmelser I direktiv 1999/5/EF. This device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range. National Restrictions This product may be used in all EU countries (and other countries following the EU Directive 1999/5/EC) without any limitation except for the countries mentioned below: Ce produit peut être utilisé dans tous les pays de l’UE (et dans tous les pays ayant transposés la directive 1999/5/EC) sans aucune limitation, excepté pour les pays mentionnés ci-dessous: WAP6806 User’s Guide 124 Appendix C Legal Information Questo prodotto è utilizzabile in tutte i paesi EU (ed in tutti gli altri paesi che seguono le direttiva 1999/5/EC) senza nessuna limitazione, eccetto per i paesii menzionati di seguito: Das Produkt kann in allen EU Staaten ohne Einschränkungen eingesetzt werden (sowie in anderen Staaten die der Richtlinie 1999/5/EC folgen) mit Außnahme der folgenden aufgeführten Staaten: In the majority of the EU and other European countries, the 2.4GHz and 5GHz bands have been made available for the use of wireless local area networks (LANs). Later in this document you will find an overview of countries in which additional restrictions or requirements or both are applicable. The requirements for any country may evolve. ZyXEL recommends that you check with the local authorities for the latest status of their national regulations for both the 2.4GHz and 5GHz wireless LANs. The following countries have restrictions and/or requirements in addition to those given in the table labeled “Overview of Regulatory Requirements for Wireless LANs”:. Belgium The Belgian Institute for Postal Services and Telecommunications (BIPT) must be notified of any outdoor wireless link having a range exceeding 300 meters. Please check http://www.bipt.be for more details. Draadloze verbindingen voor buitengebruik en met een reikwijdte van meer dan 300 meter dienen aangemeld te worden bij het Belgisch Instituut voor postdiensten en telecommunicatie (BIPT). Zie http://www.bipt.be voor meer gegevens. Les liaisons sans fil pour une utilisation en extérieur d’une distance supérieure à 300 mètres doivent être notifiées à l’Institut Belge des services Postaux et des Télécommunications (IBPT). Visitez http://www.ibpt.be pour de plus amples détails. Denmark In Denmark, the band 5150 - 5350 MHz is also allowed for outdoor usage. I Danmark må frekvensbåndet 5150 - 5350 også anvendes udendørs. Italy This product meets the National Radio Interface and the requirements specified in the National Frequency Allocation Table for Italy. Unless this wireless LAN product is operating within the boundaries of the owner's property, its use requires a “general authorization.” Please check http://www.sviluppoeconomico.gov.it/ for more details. Questo prodotto è conforme alla specifiche di Interfaccia Radio Nazionali e rispetta il Piano Nazionale di ripartizione delle frequenze in Italia. Se non viene installato all 'interno del proprio fondo, l'utilizzo di prodotti Wireless LAN richiede una “Autorizzazione Generale”. Consultare http://www.sviluppoeconomico.gov.it/ per maggiori dettagli. Latvia The outdoor usage of the 2.4 GHz band requires an authorization from the Electronic Communications Office. Please check http:// www.esd.lv for more details. 2.4 GHz frekvenèu joslas izmantoðanai ârpus telpâm nepiecieðama atïauja no Elektronisko sakaru direkcijas. Vairâk informâcijas: http:// www.esd.lv. Notes: 1. Although Norway, Switzerland and Liechtenstein are not EU member states, the EU Directive 1999/5/EC has also been implemented in those countries. 2. The regulatory limits for maximum output power are specified in EIRP. The EIRP level (in dBm) of a device can be calculated by adding the gain of the antenna used (specified in dBi) to the output power available at the connector (specified in dBm). List of national codes COUNTRY ISO 3166 2 LETTER CODE COUNTRY ISO 3166 2 LETTER CODE Austria AT Liechtenstein LI Belgium BE Lithuania LT LU Bulgaria BG Luxembourg Croatia HR Malta MT Cyprus CY Netherlands NL Czech Republic CZ Norway NO Denmark DK Poland PL Estonia EE Portugal PT Finland FI Romania RO France FR Serbia RS Germany DE Slovakia SK Greece GR Slovenia SI Hungary HU Spain ES Iceland IS Sweden SE Ireland IE Switzerland CH Italy IT Turkey TR Latvia LV United Kingdom GB Safety Warnings • Do not use this product near water, for example, in a wet basement or near a swimming pool. WAP6806 User’s Guide 125 Appendix C Legal Information • • • • • • • • • • • • • • Do not expose your device to dampness, dust or corrosive liquids. Do not store things on the device. Do not install, use, or service this device during a thunderstorm. There is a remote risk of electric shock from lightning. Connect ONLY suitable accessories to the device. Do not open the device or unit. Opening or removing covers can expose you to dangerous high voltage points or other risks. Only qualified service personnel should service or disassemble this device. Please contact your vendor for further information. Make sure to connect the cables to the correct ports. Place connecting cables carefully so that no one will step on them or stumble over them. Always disconnect all cables from this device before servicing or disassembling. Do not remove the plug and connect it to a power outlet by itself; always attach the plug to the power adaptor first before connecting it to a power outlet. Do not allow anything to rest on the power adaptor or cord and do NOT place the product where anyone can walk on the power adaptor or cord. Please use the provided or designated connection cables/power cables/adaptors. Connect it to the right supply voltage (for example, 110V AC in North America or 230V AC in Europe). If the power adaptor or cord is damaged, it might cause electrocution. Remove it from the device and the power source; repairing the power adapter or cord is prohibited. Contact your local vendor to order a new one. Do not use the device outside, and make sure all the connections are indoors. There is a remote risk of electric shock from lightning. Caution: risk of explosion if battery is replaced by an incorrect type. dispose of used batteries according to the instructions. Dispose them at the applicable collection point for the recycling of electrical and electronic device. For detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the store where you purchased the product. Do not obstruct the device ventilation slots, as insufficient airflow may harm your device. The following warning statements apply, where the disconnect device is not incorporated in the device or where the plug on the power supply cord is intended to serve as the disconnect device, • For permanently connected devices, a readily accessible disconnect device shall be incorporated external to the device; • For pluggable devices, the socket-outlet shall be installed near the device and shall be easily accessible. Environment statement ErP (Energy-related Products) ZyXEL products put on the EU market in compliance with the requirement of the European Parliament and the Council published Directive 2009/125/EC establishing a framework for the setting of ecodesign requirements for energy-related products (recast), so called as "ErP Directive (Energy-related Products directive) as well as ecodesign requirement laid down in applicable implementing measures, power consumption has satisfied regulation requirements which are: Network standby power consumption < 12W, and/or Off mode power consumption < 0.5W, and/or Standby mode power consumption < 0.5W. Wireless setting, please refer to the "Wireless" chapter for more detail. European Union - Disposal and Recycling Information The symbol below means that according to local regulations your product and/or its battery shall be disposed of separately from domestic waste. If this product is end of life, take it to a recycling station designated by local authorities. At the time of disposal, the separate collection of your product and/or its battery will help save natural resources and ensure that the environment is sustainable development. Die folgende Symbol bedeutet, dass Ihr Produkt und/oder seine Batterie gemäß den örtlichen Bestimmungen getrennt vom Hausmüll entsorgt werden muss. Wenden Sie sich an eine Recyclingstation, wenn dieses Produkt das Ende seiner Lebensdauer erreicht hat. Zum Zeitpunkt der Entsorgung wird die getrennte Sammlung von Produkt und/oder seiner Batterie dazu beitragen, natürliche Ressourcen zu sparen und die Umwelt und die menschliche Gesundheit zu schützen. El símbolo de abajo indica que según las regulaciones locales, su producto y/o su batería deberán depositarse como basura separada de la doméstica. Cuando este producto alcance el final de su vida útil, llévelo a un punto limpio. Cuando llegue el momento de desechar el producto, la recogida por separado éste y/o su batería ayudará a salvar los recursos naturales y a proteger la salud humana y medioambiental. Le symbole ci-dessous signifie que selon les réglementations locales votre produit et/ou sa batterie doivent être éliminés séparément des ordures ménagères. Lorsque ce produit atteint sa fin de vie, amenez-le à un centre de recyclage. Au moment de la mise au rebut, la collecte séparée de votre produit et/ou de sa batterie aidera à économiser les ressources naturelles et protéger l'environnement et la santé humaine. Il simbolo sotto significa che secondo i regolamenti locali il vostro prodotto e/o batteria deve essere smaltito separatamente dai rifiuti domestici. Quando questo prodotto raggiunge la fine della vita di servizio portarlo a una stazione di riciclaggio. Al momento dello smaltimento, la raccolta separata del vostro prodotto e/o della sua batteria aiuta a risparmiare risorse naturali e a proteggere l'ambiente e la salute umana. Symbolen innebär att enligt lokal lagstiftning ska produkten och/eller dess batteri kastas separat från hushållsavfallet. När den här produkten når slutet av sin livslängd ska du ta den till en återvinningsstation. Vid tiden för kasseringen bidrar du till en bättre miljö och mänsklig hälsa genom att göra dig av med den på ett återvinningsställe. WAP6806 User’s Guide 126 Appendix C Legal Information WAP6806 User’s Guide 127 Appendix C Legal Information Environmental Product Declaration WAP6806 User’s Guide 128 Appendix C Legal Information 台灣 以下訊息僅適用於產品銷售至台灣地區 • 第十二條→經型式認證合格之低功率射頻電機，非經許可，公司，商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。 • 第十四條→低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。 前項合法通信，指依電信法規定作業之無線電通信。 低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 用 20cm 計算 MPE 能符合 1 mW/cm2。 電磁波曝露量 MPE 標準值 1mW/cm2，送測產品實測值為： _XX_mW/cm2。 無線資訊傳輸設備忍受合法通信之干擾且不得干擾合法通信；如造成干擾，應立即停用，俟無干擾之虞，得繼續使用。 無線資訊傳輸設備的製造廠商應確保頻率穩定性，如依製造適使用手冊上所述正常操作，發射的信號應維持於操作頻帶中。 以下訊息僅適用於產品操作於 5.25-5.35 秭赫頻帶內並銷售至台灣地區 • 在 5.25-5.35 秭赫頻帶內操作之無線資訊傳輸設備，限於室內使用。 以下訊息使僅適用於產品屬於專業安裝並銷售至台灣地區 • 本器材須經專業工程人員安裝及設定，始得設置使用，且不得直接販售給一般消費者。 安全警告 為了您的安全，請先閱讀以下警告及指示 : • 請勿將此產品接近水、火焰或放置在高溫的環境。 • 避免設備接觸。 • 任何液體 - 切勿讓設備接觸水、雨水、高濕度、污水腐蝕性的液體或其他水份。 • 灰塵及污物 - 切勿接觸灰塵、污物、沙土、食物或其他不合適的材料。 • 雷雨天氣時，不要安裝，使用或維修此設備。有遭受電擊的風險。 • 切勿重摔或撞擊設備，並勿使用不正確的電源變壓器。 • 若接上不正確的電源變壓器會有爆炸的風險。。 • 請勿隨意更換產品內的電池。 • 如果更換不正確之電池型式，會有爆炸的風險，請依製造商說明書處理使用過之電池。 • 請將廢電池丟棄在適當的電器或電子設備回收處。 • 請勿將設備解體。 • 請勿阻礙設備的散熱孔，空氣對流不足將會造成設備損害。 • 請插在正確的電壓供給插座 ( 如 : 北美 / 台灣電壓 110V AC，歐洲是 230V AC)。 • 假若電源變壓器或電源變壓器的纜線損壞，請從插座拔除，若您還繼續插電使用，會有觸電死亡的風險。 • 請勿試圖修理電源變壓器或電源變壓器的纜線，若有毀損，請直接聯絡您購買的店家，購買一個新的電源變壓器。 • 請勿將此設備安裝於室外，此設備僅適合放置於室內。 • 請勿隨一般垃圾丟棄。 • 請參閱產品背貼上的設備額定功率。 • 請參考產品型錄或是彩盒上的作業溫度。 • 產品沒有斷電裝置或者採用電源線的插頭視為斷電裝置的一部分，以下警語將適用 : － 對永久連接之設備， 在設備外部須安裝可觸及之斷電裝置； － 對插接式之設備， 插座必須接近安裝之地點而且是易於觸及的。 Viewing Certifications Go to http://www.zyxel.com to view this product’s documentation and certifications. ZyXEL Limited Warranty ZyXEL warrants to the original end user (purchaser) that this product is free from any defects in material or workmanship for a specific period (the Warranty Period) from the date of purchase. The Warranty Period varies by region. Check with your vendor and/or the authorized ZyXEL local distributor for details about the Warranty Period of this product. During the warranty period, and upon proof of purchase, should the product have indications of failure due to faulty workmanship and/or materials, ZyXEL will, at its discretion, repair or replace the defective products or components without charge for either parts or labor, and to whatever extent it shall deem necessary to restore the product or components to proper operating condition. Any replacement will consist of a new or re-manufactured functionally equivalent product of equal or higher value, and will be solely at the discretion of ZyXEL. This warranty shall not apply if the product has been modified, misused, tampered with, damaged by an act of God, or subjected to abnormal working conditions. Note Repair or replacement, as provided under this warranty, is the exclusive remedy of the purchaser. This warranty is in lieu of all other warranties, express or implied, including any implied warranty of merchantability or fitness for a particular use or purpose. ZyXEL shall in no event be held liable for indirect or consequential damages of any kind to the purchaser. To obtain the services of this warranty, contact your vendor. You may also refer to the warranty policy for the region in which you bought the device at http://www.zyxel.com/web/support_warranty_info.php. Registration Register your product online to receive e-mail notices of firmware upgrades and information at www.zyxel.com for global products, or at www.us.zyxel.com for North American products. WAP6806 User’s Guide 129 Appendix C Legal Information Open Source Licenses This product contains in part some free software distributed under GPL license terms and/or GPL like licenses. Open source licenses are provided with the firmware package. You can download the latest firmware at www.zyxel.com. If you cannot find it there, contact your vendor or ZyXEL Technical Support at support@zyxel.com.tw. To obtain the source code covered under those Licenses, please contact your vendor or ZyXEL Technical Support at support@zyxel.com.tw. WAP6806 User’s Guide 130 Index Index AP Mode status screen 24, 28 encryption 63 key 63 AP mode setting up 24 Ethernet 60 factory defaults restore 82 backup configuration 81 FCC interference statement 122 firmware upgrade screen 78 firmware upload 78 file extension using HTTP certifications viewing 129 firmware version 19, 25, 29 channel 20 client mode 53 configuration backup 81 Export 81 Import 81 reset factory defaults 82 restore 81 general 76 general wireless LAN screen 63 guide quick start 2 contact information 88 copyright 122 customer support 88 IP Address 61 disclaimer 122 documentation related 2 LAN IP screen 60 language 82 Log 49 WAP6806 User’s Guide 131 Index managing the device good habits 10 range boost mode 55 registration product 129 mode access point 15 client 15, 53 normal 54 range boost 55 repeater 15, 53 speed boost 55 related documentation 2 repeater mode 53 Reset Button 12 reset the device 32 resetting factory default 32 restore configuration 81 RTS threshold 66 navigation panel 46 navigation panel 46 security PBC 70 PIN 70 normal mode 54 service set identity. see SSID. speed boost mode 55 SSID 20, 26, 62 operating mode client mode 53 normal 54 range boost 55 repeater mode 53 speed boost 55 subnet mask 61 Summary Packet statistics 50 Wireless station status 51 system 76 system mode client mode 53 normal 54 range boost 55 repeater mode 53 speed boost 55 other documentation 2 PBC 70 PIN configuration 70 product registration 129 warranty 129 note 129 web configurator accessing 30 overview 30 quick start guide 2 WEP Encryption 68 Wireless association list 51 WAP6806 User’s Guide 132 Index wireless channel 86 wireless LAN 86 wireless network basic guidelines 62 encryption 63 security 62 SSID 62 wireless security 62 overview 62 troubleshooting 86 type 62 wizard setup 33 WPS 69 screen 69 WPS button 12, 32 WAP6806 User’s Guide 133 Index WAP6806 User’s Guide 134
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract Page Mode : UseOutlines XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Creator Tool : FrameMaker 9.0 Modify Date : 2016:05:23 15:37:57+08:00 Create Date : 2015:12:14 09:12:20Z Metadata Date : 2016:05:23 15:37:57+08:00 Format : application/pdf Title : Creator : Producer : Acrobat Distiller 9.0.0 (Windows) Document ID : uuid:24e0aa53-b5af-4f95-9ae2-306489c30279 Instance ID : uuid:880b0f5b-0584-41c8-ad0a-cc47c6f56c4b Page Count : 134 Page Layout : OneColumnEXIF Metadata provided by EXIF.tools