Zylux Acoustic AD107A4BKA Big Blue C100 User Manual

Zylux Acoustic Corporation Big Blue C100

UserManual.wiki >

Zylux Acoustic >

AD107A4BKA User Manual HTML Version

User Manual

318418 Big_Blue_100

Size:5”Wx4.75”H_Output:100%_Prints:1/1,Blk

BIG BLUE 100

™

SMALL WI-FI® SPEAKER

CAUTION

• TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER.

THERE ARE NO SERVICEABLE PARTS INSIDE.

• TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE

THIS UNIT TO RAIN OR MOISTURE.

The lightning flash with arrow-head symbol within an equilateral triangle

is intended to alert the user to the presence of uninsulated “dangerous

voltage” within the unit’s enclosure that may be of sufficient magnitude

to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert

the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the unit.

IMPORTANT SAFETY INSTRUCTIONS

All the safety and operating instructions should be read, heeded, adhered to and

followed before the unit is operated.

318418 Big_Blue_100

Size:5”Wx4.75”H_Output:100%_Prints:1/1,Blk

TABLE OF CONTENTS

Warnings and Cautions.......................................................1

FCC Information ............................................................4

Location of Parts and Controls...............................................6

Setting Up Big Blue 100 on a Network.......................................8

Power .....................................................................10

Using Chromecast built-in™.................................................11

Grouping Speakers with Chromecast built-in ................................12

Big Blue 100 Software Updates ............................................12

Using Bluetooth® ..........................................................13

Using Aux In...............................................................14

LED Ring On/Off ..........................................................14

Wi-Fi Settings Reset .......................................................15

Unable to Boot Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Compatibility...............................................................17

Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

LED Indicator Chart........................................................18

Speciﬁcations..............................................................19

Frequently Asked Questions................................................20

Warranty ..................................................................24

SAFETY AND HANDLING INFORMATION

For maximum product life, do not drop, throw or crush the speaker. Do not expose it

to humidity, dust, or operating temperatures outside 32°F to 113°F (0°C to 45°C).

SAVE THESE INSTRUCTIONS!

DANGER

To reduce the risk of electric shock, burns, fire or injury:

1. Do not use while bathing or in a shower.

2. Do not place or store unit where it can fall or be pulled into a tub or sink.

3. Do not place in, drop or submerge in water or other liquid.

4. Do not reach for a unit that has fallen into water. Unplug it immediately.

5. Care should be taken so that objects do not fall and liquids are not spilled

onto the unit.

WARNING

1. Close supervision is necessary when this appliance/product is used by or near

children or mentally disabled individuals.

2. Use this unit only for its intended use as described in this manual.

3. Unplug this unit during lightning storms or when unused for long periods of time.

4. Never drop or insert an object into any opening.

5. Protect the power cord from being walked on or pinched, particularly at plug

outlets, convenience receptacles and the point where it exits the unit.

6. Do not allow cord to touch hot surfaces. Wrap cord loosely around the unit

when storing.

7. The unit should be situated away from direct sunlight or heat sources such

as radiators, electric heaters, heat registers, stoves, or other units (including

amplifiers) that produce heat. Avoid placing on top of stereo equipment that

radiates heat.

8. Never block the air openings of the unit with materials such as clothing, plastic

bags or papers, or place it on a soft surface such as a bed or couch, where the air

openings may be blocked.

9. Do not overload the electrical outlet. Use the power source only as indicated.

10. Do not carry this unit by its cord or use the cord as a handle.

11. Never operate this unit if it has a damaged cord or plug, if it is not working

properly, or if it has been dropped or damaged, or dropped into water. If the unit’s

power supply cord or plug is damaged, do not attempt to fix it yourself.

12. To avoid the risk of electric shock, do not disassemble or attempt to repair the

2 3

318418 Big_Blue_100

Size:5”Wx4.75”H_Output:100%_Prints:1/1,Blk

4 5

unit. Incorrect repair can cause risk of electric shock or injury to persons when the

unit is used.

13. Do not operate in the presence of explosive and/or flammable fumes.

14. Never remove the plug from the outlet by pulling the power cord.

15. Where the MAINS plug or appliance coupler is used as the disconnect device,

the disconnect device shall remain readily operable.

16. The data plate is located on the bottom of the product.

FCC INFORMATION

Caution: Changes or modifications not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B

Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not

occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the distance between the equipment and receiver.

• Connect the equipment to an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

1. This device may not cause harmful interference, and;

2. This device must accept any interference received, including interference that

may cause undesired operation.

Modifications not authorized by the manufacturer may void the user’s authority to

operate this device.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment. This equipment should be installed and operated with a

minimum distance of 20 cm between the radiator and your body.

FCC ID: XN6-AD107A4BKA

318418 Big_Blue_100

Size:5”Wx4.75”H_Output:100%_Prints:1/1,Blk

6 7

LOCATION OF PARTS AND CONTROLS LOCATION OF PARTS AND CONTROLS

318418 Big_Blue_100

Size:5”Wx4.75”H_Output:100%_Prints:1/1,Blk

1. Power/Pairing Button

2. Volume -

3. Bluetooth® Mode LED Indicator

4. Wi-Fi Mode LED Indicator

5. Wi-Fi Status LED Indicator

6. Volume +

7. LED Ring/Volume Level

LED Indicators

8. Wi-Fi Set Up/Reset Button

9. DC In Port

10. Aux In Port

11. Adapter

8 9

Each Big Blue 100 has a unique identifier. It may take up to a minute for the

Big Blue 100 to appear as an available device.

Important: The Big Blue 100 will automatically appear as an available device

in the Google Home app. Do not select “Add New Device” in the app.

9. Follow instructions in app to complete setup. The setup process may take

several minutes. During set up, the WI-FI STATUS LED INDICATOR may turn off

for several seconds, this is normal.

10. After setup is complete, WI-FI STATUS LED INDICATOR will be solid yellow

(Aux mode), indicating Big Blue 100 is ready to Cast (refer to page 11 for

instructions on how to use Chromecast built-in).

Note: If setting up multiple speakers in the Google Home app, leave additional

speakers powered off while setting up a speaker.

SETTING UP BIG BLUE 100 ON A NETWORK

DOWNLOADING GOOGLE HOME APP

Go to the iTunes® App StoreSM (for Apple devices) or Google PlayTM (for Android®

devices) to download the Google Home app.

CONNECTING BIG BLUE 100 TO A NETWORK

1. Connect the adapter’s jack to the DC IN PORT on the back of Big Blue 100.

2. Plug the adapter into an electrical outlet.

3. Press the POWER BUTTON. The LED ring will turn on.

4. When the Big Blue 100 is powered on, the WI-FI STATUS LED INDICATOR

is solid red for several seconds then changes to flashing white for several

seconds while the Big Blue 100 is booting up. The WI-FI STATUS LED

INDICATOR may turn on and off during the booting up process, this is normal.

5. After booting is complete, the WI-FI STATUS LED INDICATOR continuously

flashes white, indicating the Big Blue 100 is ready to be connected to a Wi-Fi

network through the Google Home app.

6. Ensure your device (e.g., smartphone) is connected to a Wi-Fi network. The Wi-Fi

network will also be used to pair the Big Blue 100 with the Google Home app.

7. Ensure Bluetooth® is enabled on your device (e.g., smartphone). During set up,

the Google Home app needs to access your device (e.g., smartphone) using

Bluetooth®.

8. With the Big Blue 100 powered on, open the Google Home app and select

“Devices” from the menu. “BB 100 XXXXX” will appear as a device to set up.

318418 Big_Blue_100

Size:5”Wx4.75”H_Output:100%_Prints:1/1,Blk

10 11

USING CHROMECAST BUILT-IN

Chromecast built-in is a technology that lets you stream your favorite music, radio or

podcasts from your mobile device to your speakers.

1. After Big Blue 100 has been set up in the Google Home app, tap the Cast

button in any Chromecast-enabled app and select the Big Blue 100.

Consult the Google Home app for a list of apps that are Chromecast-enabled.

2. Audio will stream from the Chromecast-enabled app to Big Blue 100 over Wi-Fi.

The WI-FI MODE LED INDICATOR is solid white to indicate Big Blue 100 is

in Wi-Fi mode. When audio is streaming, the WI-FI STATUS LED INDICATOR will

be solid green. If audio is not streaming, the WI-FI STATUS LED INDICATOR will

flash green.

3. Use VOLUME + on Big Blue 100 to increase the volume. The VOLUME

LEVEL LED INDICATORS show the volume level for 5 seconds.

4. Use VOLUME - on Big Blue 100 to decrease the volume. The VOLUME

LEVEL LED INDICATORS show the volume level for 5 seconds.

POWER

1. Press the POWER BUTTON to turn Big Blue 100 on. The LED ring will turn

on. The WI-FI STATUS LED INDICATOR will be solid yellow, indicating the Big

Blue 100 is in Aux mode (if last mode used was Wi-Fi Casting or Aux) or

the BLUETOOTH® MODE LED INDICATOR will flash blue, indicating Big Blue

100 is in Bluetooth® mode (if last mode used was Bluetooth®).

2. To use Chromecast built-in, refer to the instructions on page 11.

3. To use Bluetooth®, refer to the instructions on page 13.

4. To use Aux In, refer to the instructions on page 14.

5. To power off (put Big Blue 100 in stand by mode), press the POWER BUTTON.

Notes:

• Big Blue 100 will go into low power mode immediately if no audio is

streaming in Wi-Fi, Aux or Bluetooth® mode. After 20 minutes of no audio

streaming, the Big Blue 100 will go into standby mode. All LED

INDICATORS and LED RING are off in standby mode.

• To wake the Big Blue 100 from standby mode, press the POWER

BUTTON, activate audio using Chromecast built-in, or plug the Aux in cable

into the AUX IN PORT.

318418 Big_Blue_100

Size:5”Wx4.75”H_Output:100%_Prints:1/1,Blk

12 13

GROUPING SPEAKERS WITH CHROMECAST BUILT-IN

Speakers set up in the Google Home app can be grouped together to stream the same

audio content.

1. Tap the menu icon on a device that has been set up in the Google Home app and

select “Create Group.”

2. Select at least two speakers for the group and enter a name for the group.

3. The group will appear as an available connection when the Cast button is tapped

in Chromecast-enabled apps.

4. Access the speaker group in the Google Home app to control play/pause or control

the volume of each speaker.

BIG BLUE 100 SOFTWARE UPDATES

As updates become available, the Big Blue 100’s software will automatically update when

the Big Blue 100 is connected to a Wi-Fi network.

During a software update, the WI-FI STATUS LED INDICATOR will pulse orange.

When the software update is complete, the WI-FI STATUS LED INDICATOR will turn solid

red for a few seconds, change to breathing white for a few seconds and then turn off

for several seconds as the Big Blue 100 reboots. After booting is complete, the WI-FI

STATUS LED INDICATOR is solid yellow (Aux mode), indicating Big Blue 100 is ready to

Cast.

Note: A software update may occur while audio is streaming. Audio streaming

will stop while the Big Blue 100 is being updated. After the update is complete,

tap the Cast button in your Chromecast-enabled app to resume audio.

318418 Big_Blue_100

Size:5”Wx4.75”H_Output:100%_Prints:1/1,Blk

USING BLUETOOTH®

1. Prepare your device to pair using Bluetooth®, making sure you are within

33 feet of Big Blue 100. Refer to your device’s owner’s manual for details if

necessary.

2. With the Big Blue 100 powered on, press and hold the POWER/PAIRING

BUTTON until the LED RING starts pulsing.

3. The Big Blue 100 is in pairing mode when the LED RING and BLUETOOTH®

MODE LED INDICATOR are pulsing. Big Blue 100 will wait for a connection

in pairing mode for up to 120 seconds.

4. Once Big Blue 100 is in pairing mode and your device is ready to pair, select

“BB 100 XXXXX.” Each Big Blue 100 has a unique identifier. If prompted,

use 0000 as a PIN for the pairing code.

5. Once “BB 100 XXXXX” is selected, the LED RING will change to solid and the

BLUETOOTH® MODE LED INDICATOR will start flashing to confirm pairing is

complete. When audio is streaming, the BLUETOOTH® MODE LED INDICATOR

will change to solid.

Note: To cancel the pairing mode, wait the 120 seconds for Big Blue 100 to

cancel pairing automatically. The LED RING will return to solid and the unit

will remain on.

6. Use VOLUME + on Big Blue 100 to increase the volume. The VOLUME

LEVEL LED INDICATORS show the volume level for 5 seconds.

7. Use VOLUME - on Big Blue 100 to decrease the volume. The VOLUME

LEVEL LED INDICATORS show the volume level for 5 seconds.

14 15

318418 Big_Blue_100

Size:5”Wx4.75”H_Output:100%_Prints:1/1,Blk

USING AUX IN

Connect your audio device to the Big Blue 100 with a 3.5mm-to-3.5mm cable (not

included).

1. Plug one end of the cable into your audio device, just like you would a pair of

headphones.

2. Plug the other end of the cable into the 3.5mm port labeled AUX IN on the Big

Blue 100. The WI-FI STATUS LED INDICATOR will be solid yellow.

3. Use your audio device to control music playback. Adjust volume with your

audio device or with the volume controls on Big Blue 100.

LED RING ON/OFF

1. Press and hold both the VOLUME - BUTTON and the VOLUME + BUTTON

for 3 seconds to turn the LED RING off.

2. Press and hold both the VOLUME - BUTTON and the VOLUME + BUTTON to

turn the LED RING on.

Note: When the LED RING setting is off and the VOLUME - and VOLUME +

BUTTONS are pressed, the VOLUME LEVEL LED INDICATORS show the

volume level for 5 seconds then the LED RING turns off.

WI-FI SETTINGS RESET

1. With Big Blue 100 powered on, press and hold the WI-FI® SET UP/RESET

BUTTON until the LED RING turns off (approximately 5 seconds). The WI-FI

STATUS LED INDICATOR is solid white for several seconds while the Big Blue

100 resets.

2. After reset is complete, the WI-FI STATUS LED INDICATOR is solid red for

several seconds while the Big Blue 100 is booting up. The WI-FI STATUS

LED INDICATOR may turn on and off during the booting up process, this is

normal.

3. After booting is complete, the WI-FI STATUS LED INDICATOR continuously

flashes white, indicating the Big Blue 100 is ready to be connected to a

Wi-Fi network through the Google Home app.

16 17

318418 Big_Blue_100

Size:5”Wx4.75”H_Output:100%_Prints:1/1,Blk

UNABLE TO BOOT RESET

If the WI-FI STATUS LED INDICATOR is flashing red, Big Blue 100 has failed to boot

and needs to be reset.

1. With Big Blue 100 powered on, press and hold the WI-FI SET UP/RESET

BUTTON until the LED RING turns off (approximately 5 seconds). The WI-FI

STATUS LED INDICATOR is solid white for several seconds while the Big Blue

100 resets.

2. After reset is complete, the WI-FI STATUS LED INDICATOR is solid red for

several seconds while the Big Blue 100 is booting up. The WI-FI STATUS

LED INDICATOR may turn on and off during the booting up process, this is

normal. The booting process may take up to one minute to complete.

3. After booting is complete, the WI-FI STATUS LED INDICATOR continuously

flashes white, indicating the Big Blue 100 is ready to be connected to a

Wi-Fi network through the Google Home app.

COMPATIBILITY

Bluetooth 4.0 or above device with A2DP and AVRCP.

CARE AND MAINTENANCE

To clean, wipe the Big Blue 100 with a soft, dry cloth.

18 19

318418 Big_Blue_100

Size:5”Wx4.75”H_Output:100%_Prints:1/1,Blk

SPECIFICATIONS

Power Supply (Input) ................................ AC 100V-240V, 50/60 Hz

Power Supply (Output) .......................................... DC 16V/1.8A

Power Output........................................................... 20W

Bluetooth® Range.................................. Class 2, up to 33 ft (10 m)

Compatibility........................................ Bluetooth 4.0 with A2DP

and AVRCP

Frequency Response........................................... 80Hz - 20kHz

Drivers ..................................................... 1 x 1" tweeter

1 x 4" Mid-woofer

Product Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.11 lbs (1.4 kg) (approximately)

Product Dimensions . . . . 4.92” (125mm) w x 4.92” (125mm) d x 7.9” (198.5mm) h

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any

use of such marks by Brookstone is under license.

Android is a registered trademark of Google, Inc.

Chromecast is a trademark of Google Inc.

Wi-Fi and Wi-Fi logo are registered trademarks of the Wi-Fi Alliance.

Big Blue® is a registered trademark owned by Big Blue Audio LLC.

LED INDICATOR CHART

LED Indicator Function Color State

Wi-Fi Status

Booting

Unable to Boot

Network Streaming Audio

Network Buffering Audio

Network Not Streaming Audio

Aux Mode Streaming Audio

Aux Mode Not Streaming Audio

Ready to connect to a Wi-Fi network

through Chromecast built-in

Reset

Updating Software

System Error

Red

Green

Yellow

White

Orange

Solid

Flashing

Solid

Pulsing

Flashing

Solid

Flashing

Solid

Pulsing

Flashing

Bluetooth Mode

Bluetooth Streaming Audio

Bluetooth Not Streaming Audio or

Bluetooth Not Connected

Using Bluetooth, In Pairing mode

Blue

Solid

Flashing

Pulsing

Wi-Fi Mode Streaming Audio through Wi-Fi network White Solid

LED Ring

Power on

Searching for Bluetooth device

White

Solid

Pulsing

20 21

318418 Big_Blue_100

Size:5”Wx4.75”H_Output:100%_Prints:1/1,Blk

Why isn’t there a Cast button in the app from which I would like to stream audio?

Ensure the Big Blue 100 has been set up using the Google Home app

(please refer to page 8 for set up instructions).

Confirm the app you would like to stream music from is enabled with Chromecast

built-in.

Confirm the Wi-Fi network enabled on your device is the same Wi-Fi network that

was used when the Big Blue 100 was set up using the Google Home app.

Confirm the Wi-Fi network used during set up with the Google Home app has all

network privileges enabled. For example, a “guest network” on a router may not

have all network privileges enabled.

Refresh the Chromecast-enabled enabled app.

Why doesn’t the Big Blue 100 appear as an available connection when I tap the

Cast button in the app from which I would like to stream audio?

Ensure the Big Blue 100 has been set up using the Google Home app

(please refer to page 8 for set up instructions).

Verify the Big Blue 100 appears as a device in Google Home app device list.

The Big Blue 100 will stream audio from audio or music Chromecast-enabled apps,

it may not stream audio from some video apps.

FREQUENTLY ASKED QUESTIONS

Why doesn’t the Big Blue 100 automatically show as a device in the Google Home

app?

It may take several minutes for the Big Blue 100 to appear as a device in the

Google Home app.

Ensure the Big Blue 100 is in range of your Wi-Fi network.

Ensure Bluetooth is enabled on your device. During set up, the Google Home

app needs to access your device using Bluetooth.

Restart Big Blue 100 by powering off and then on.

Reset Big Blue 100 (please refer to page 15 for reset instructions).

Why won’t audio play through the speaker in Wi-Fi mode?

Ensure the Big Blue 100 has been selected from the Cast menu in the

Chromecast-enabled app.

Ensure the Big Blue 100 is in range of your Wi-Fi network.

Restart Big Blue 100 by powering off and then on.

Check Big Blue 100 or your device’s volume level.

22 23

318418 Big_Blue_100

Size:5”Wx4.75”H_Output:100%_Prints:1/1,Blk

Why won’t audio play through the speaker when the BLUETOOTH MODE LED

INDICATOR is flashing blue?

Select “BB 100 XXXXX” in your device’s Bluetooth settings to connect.

Why won’t audio play through the speaker using Bluetooth?

Ensure your device is within 33 feet of Big Blue 100 and reconnect your device

to Big Blue 100 (please refer to page 13 for pairing instructions).

Restart Big Blue 100 by powering off and then on.

Check Big Blue 100 or your device’s volume level.

Why does the Big Blue 100 show as a Wi-Fi connection on my device?

The Big Blue 100 broadcasts a signal but the Wi-Fi connection is handled through

the Google Home app.

Why won’t audio play through the speaker using Aux Mode?

Remove and reinsert the 3.5mm-to-3.5mm cable (not included) into the AUX IN

port.

Why can audio only be heard through one speaker in a group?

It may take up to a minute for audio to stream on all speakers in a group.

How do I set up Big Blue 100 on a new Wi-Fi network?

Reset Big Blue 100 (please refer to page 15 for reset instructions). After booting

is complete, the WI-FI STATUS LED INDICATOR continuously flashes white to

indicate the Big Blue 100 is ready to be connected to a Wi-Fi network through the

Google Home app (please refer to page 8 for set up instructions).

How do I put the Big Blue 100 into stand by mode when it is waiting to be

connected to a Wi-Fi network?

When the Big Blue 100 is waiting to be connected to a Wi-Fi network (WI-FI

STATUS LED INDICATOR flashing white), it can not be put into stand by mode.

Unplug the Big Blue 100 to power off.

How can I switch to Bluetooth mode?

Ensure your device is within 33 feet of Big Blue 100 and connect your device to

Big Blue 100 (please refer to page 13 for pairing instructions) to switch the Big

Blue 100 to Bluetooth mode.

How can I switch to Wi-Fi mode?

Tap the Cast button in Chromecast-enabled apps to switch the Big Blue 100 to

Wi-Fi mode.

24 25

ONE (1) YEAR LIMITED WARRANTY

Brookstone® warrants this product against defects in materials and/or workmanship

under normal use for a period of ONE (1) YEAR from the date of purchase by the

original purchaser (“Warranty Period”). If a defect arises and a valid claim is received

within the Warranty Period, at its option, Brookstone will either 1) repair the defect

at no charge, using new or refurbished replacement parts, or 2) replace the product

with a new product that is at least functionally equivalent to the original product, or

3) provide a store credit in the amount of the purchase price of the original product.

A replacement product or part, including a user-installable part installed in accordance

with instructions provided by Brookstone, assumes the remaining warranty of the

original product. When a product or part is exchanged, any replacement item becomes

your property and the replaced item becomes Brookstone’s property. When a store

credit is given, the original product must be returned to Brookstone and becomes

Brookstone’s property.

Obtaining Service: To obtain warranty service, call Brookstone Limited Warranty Service at

1-800-292-9819. Please be prepared to describe the product that needs service and

the nature of the problem. A purchase receipt is required. All repairs and replacements

must be authorized in advance. Service options, parts availability and response times

will vary. You are responsible for delivery and the cost of delivery of the product or any

parts to the authorized service center for replacement, per our instructions.

Limits and Exclusions: Coverage under this Limited Warranty is limited to the United

States of America, including the District of Columbia and the U.S. Territories of

Guam, Puerto Rico, and the U.S. Virgin Islands. This Limited Warranty applies only

to products manufactured for Brookstone that can be identified by the “Brookstone”

trademark, trade name, or logo affixed to them or their packaging. The Limited

Warranty does not apply to any non-Brookstone products. Manufacturers or

suppliers other than Brookstone may provide their own warranties to the purchaser,

but Brookstone, in so far as permitted by law, provides these products “as is.”

This warranty does not apply to: a) damage caused by failure to follow instructions

relating to product’s use or the installation of components; b) damage caused by

accident, abuse, misuse, fire, floods, earthquake or other external causes; c) damage

caused by service performed by anyone who is not a representative of Brookstone;

d) accessories used in conjunction with a covered product; e) a product or part

that has been modified to alter functionality or capability; f) items intended to be

periodically replaced by the purchaser during the normal life of the product including,

without limitation, batteries or light bulbs; g) any product sold “as is” including, without

limitation, floor demonstration models and refurbished items; or h) a product that is

used commercially or for a commercial purpose.

BROOKSTONE SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL

DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING

OUT OF ANY BREACH OF THIS WARRANTY. TO THE EXTENT PERMITTED BY

APPLICABLE LAW, BROOKSTONE DISCLAIMS ANY AND ALL STATUTORY OR

IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES

OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

WARRANTIES AGAINST HIDDEN OR LATENT DEFECTS. IF BROOKSTONE

CANNOT LAWFULLY DISCLAIM STATUTORY OR IMPLIED WARRANTIES, THEN

TO THE EXTENT PERMITTED BY LAW, ALL SUCH WARRANTIES SHALL BE

LIMITED IN DURATION TO THE DURATION OF THIS EXPRESS WARRANTY.

Some states disallow the exclusion or limitation of incidental or consequential

damages or how long an implied warranty lasts, so the above exclusions or limitations

may not apply to you. This warranty gives you specific legal rights and you may also

have other rights, which vary from state to state.

318418 Big_Blue_100

Size:5”Wx4.75”H_Output:100%_Prints:1/1,Blk

318418

Find thousands more

great ideas online

Merrimack, New Hampshire, USA 03054 • 800-846-3000 • Brookstone.com

Zylux Acoustic AD107A4BKA Big Blue C100 User Manual

Zylux Acoustic Corporation Big Blue C100

User Manual

Navigation menu

Namespaces

Views

Navigation