Zylux Acoustic BUE300 Bluetooth Headphone User Manual
Zylux Acoustic Corporation Bluetooth Headphone
User Manual
WHAT’S IN THE BOX
• 1 pair of BEEM headphone (BeActiv E300)
• 4 sizes of Ear Tips
• 1 USB Charging Cable
• 1 Carrying Case
• 1 User’s Manual
GET STARTED INDICATORS
POWER ON/OFF
Press and hold the center button
(o) for 3 seconds to power on
an o.
PAIRING
Make sure the headphone is o
and hold the center button (o)
for 4 seconds.
Follow the voice-guided
connection instructions to
connect your Bluetooth device.
YOUR DEVICE IS NOT CONNECTED.
Flashing White every 2 secs
YOUR DEVICE IS PAIRING.
Flashing White and Orange
alternately
YOUR DEVICE IS CONNECTED
Flash White every 2 times
every 4 secs
YOUR DEVICE IS AT
BATTERY LOW STATUS
Flashing Orange
EAR TIPS: SELECT THE EAR
TIP SIZE THAT’S MOST
COMFORTABLE FOR YOU.
There are four size ear tips you
can try to determine the best t
and the best comfort ear tips.
To test the t, try speaking aloud
your voice should sound mued
in both ears. If not, try another
tip size.
TURN FOR PERFECT FIT:
After choosing the best-tting size
of ear tips, take the additional step
of twisting the ear-bud into your
ear for a perfect t. Following this
method will help your ear-buds
remain rmly inserted in your ear
during various activities.
CHARGE
Use USB charging cable, plug in the
headphone to charge.
Small Medium Large Extra-Large
(already attached)
EAR TIPS
REMOTE CONTROLS
Volume UP
Volume DOWN
Play/Pause
Answer a call
End a call
LED INDICATOR
CHARGING PORT
Charged
Charging
OUR PRODUCTS ARE INSPIRED BY
STYLE, ACOUSTICS, AND TECHNOLOGY
HEADPHONES
USER MANUAL: BeActiv E300
ADDITIONAL DETAILS
PROPER CLEANING
Keeping ear tips clean is necessary for safe, hygienic use. To clean ear
tips, use warm water, mild soap and a damp cloth to remove the dirt
and earwax from ear tip. Do NOT use harsh cleaning agents.
CARE AND STORAGE
Avoid wearing in-ear headphones if they appear dirty.
When not in use, always turn o the headphone and store your
headphones in the protective carry box.
Avoid exposure to liquids, extreme temperatures and high humidity.
Store carry box in clean, dry environment.
Never pull on the cable to disconnect charging from headphone. To
disconnect, grasp the plug at the end of the cable and pull.
TECHNICAL SPECIFICATION
Driver/Dynamic: 10.66mm
Diaphragm: PEEK+PU
Impedance: 22Ω
Frequency response: 10Hz-20kHz
Max Input power: 10mW
Connection: Bluetooth V4.1, Class 2
Prole: HFP,HSP,A2DP,AVRCP
Codec SBC, Qualcomm aptX
Noise Reduction: Qualcomm cVc 6.0
Weight: 22 grams
Playback time: 6 hours
Rating Input: @200mA
WARRANTY & PRODUCT SUPPORT
BEEM headphones are covered with a 1-Year Warranty and Product Support. Visit beemunited.com/support
for more information about how to register your product and seek customer support online.
Warning: Excessive listening levels can cause permanent hearing damage. Avoid loud listening especially
for a long periods of time.
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
2. Changes or modications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit dierent from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/ TV technician for help.
FCC Radiation Exposure Statement:
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without RF striction.
“The Bluetooth® word mark and logo are registered trademarks owned by the Bluetooth SIG, Inc. and any
use of such marks by BEEM UNITED is under license. Other trademarks and trade names are those of their
respective owners.”
SAFETY INSTRUCTIONS FOR THE LITHIUM-POLYMER BATTERY PACK
Charge products with built-in rechargeable battery at ambient temperatures between 10℃ and 40℃/
50℉ and 104℉
Switch battery-powered products o after use.
When not using the product for extended periods of time, charge its built-in rechargeable battery
regularly (about every 3 months).
Do not heat above 70℃/158℉, e.g. do not expose to sunlight or throw into re.
Do not charge a product with built-in rechargeable battery if the product is obviously defective.
•
•
•
•
•