Zymed Medical Instrumentation 109153 User Manual Utility
Zymed Medical Instrumentation Utility
Users Manual
0M 172025-101 FCC ID: NRA—109153 Programming new configuration. New configuration has been programmed Success! Configuration was programmed OK. If the values in the left and right windows do not agree, the programming operation has failed, If this occurs, press the PROGRAM function button again and retry the operation. If the second attempt fails, the transmitter may require factory service, Disconnect it from the programming cable and tag it for repair. Select a spare transmitter, connect it to the programming cable and proceed with the PROGRAM operation. When you have finished programming the transmitter, press the BACK function button to clear the PROGRAM TRANSMITTER PARAMETERS subscreen and return to the TRANSMITTER MAINTENANCE subscreen. The program subscreen will automatically return to the Transmitter subscreen. Exiting TRANSMITTER MAINTENANCE To BACK the TRANSMITTER MAINTENANCE subscreen and return to the SYSTEM SETUP subscreen, press the BACK function button. The TRANSMITTER MAINTENANCE subscreen will clear and the SYSTEM SETUP subscreen will appear. INSTRUCTION TO THE USER: This equipment generates, uses and can radiate radio frequency energy and if not insmlled and used in ordinance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, whlch can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment on a circuit different from that to which the receiver is connected Consult Zymed’s service department for assistance This equipment has been certified to comply with the limits for a class B computing device, pursuant to FCC regulations, shielded cables must be used with this equipment. Operation with non-approved equipment or unshielded cables is likely to result in interference to radio and television reception. The user Is cautioned that change and modifications made to the equipment without the approval of the manufacturer could void the user's authority to operate this equipment. EasiView Operator’s Manual ZMI Proprietary Page 111 of 150
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 1 Creator : HP ScanJet Copy Utility Create Date : Wednesday, April 05, 2000 9:08:38 AM Title : Utility Author : Unknown Producer : Acrobat PDFWriter 3.02 for Windows Subject :EXIF Metadata provided by EXIF.tools