Zyxel Wap3205 Users Manual V1.00 User掇 Guide
WAP3205 to the manual 32389abc-54d1-42dd-99fb-1a0a33285307
2015-01-23
: Zyxel Zyxel-Wap3205-Users-Manual-309680 zyxel-wap3205-users-manual-309680 zyxel pdf
Open the PDF directly: View PDF .
Page Count: 196
Download | |
Open PDF In Browser | View PDF |
WAP3205 Wireless N Access Point Default Login Details IP Address http://192.168.1.2 Password 1234 Firmware Version 1.0 Edition 1, 6/2009 www.zyxel.com www.zyxel.com Copyright © 2009 ZyXEL Communications Corporation About This User's Guide About This User's Guide Intended Audience This manual is intended for people who want to configure the WAP3205 using the Web Configurator. Related Documentation • Quick Start Guide The Quick Start Guide is designed to help you get up and running right away. It contains information on setting up your network and configuring for Internet access. • Support Disc Refer to the included CD for support documents. Documentation Feedback Send your comments, questions or suggestions to: techwriters@zyxel.com.tw Thank you! The Technical Writing Team, ZyXEL Communications Corp., 6 Innovation Road II, Science-Based Industrial Park, Hsinchu, 30099, Taiwan. Need More Help? More help is available at www.zyxel.com. WAP3205 User’s Guide 3 About This User's Guide • Download Library Search for the latest product updates and documentation from this link. Read the Tech Doc Overview to find out how to efficiently use the User Guide, Quick Start Guide and Command Line Interface Reference Guide in order to better understand how to use your product. • Knowledge Base If you have a specific question about your product, the answer may be here. This is a collection of answers to previously asked questions about ZyXEL products. • Forum This contains discussions on ZyXEL products. Learn from others who use ZyXEL products and share your experiences as well. Customer Support Should problems arise that cannot be solved by the methods listed above, you should contact your vendor. If you cannot contact your vendor, then contact a ZyXEL office for the region in which you bought the device. See http://www.zyxel.com/web/contact_us.php for contact information. Please have the following information ready when you contact an office. • Product model and serial number. • Warranty Information. • Date that you received your device. • Brief description of the problem and the steps you took to solve it. 4 WAP3205 User’s Guide Document Conventions Document Conventions Warnings and Notes These are how warnings and notes are shown in this User’s Guide. Warnings tell you about things that could harm you or your device. Note: Notes tell you other important information (for example, other things you may need to configure or helpful tips) or recommendations. Syntax Conventions • The WAP3205 may be referred to as the “WAP3205”, the “device”, the “product” or the “system” in this User’s Guide. • Product labels, screen names, field labels and field choices are all in bold font. • A key stroke is denoted by square brackets and uppercase text, for example, [ENTER] means the “enter” or “return” key on your keyboard. • “Enter” means for you to type one or more characters and then press the [ENTER] key. “Select” or “choose” means for you to use one of the predefined choices. • A right angle bracket ( > ) within a screen name denotes a mouse click. For example, Maintenance > Log > Log Setting means you first click Maintenance in the navigation panel, then the Log sub menu and finally the Log Setting tab to get to that screen. • Units of measurement may denote the “metric” value or the “scientific” value. For example, “k” for kilo may denote “1000” or “1024”, “M” for mega may denote “1000000” or “1048576” and so on. • “e.g.,” is a shorthand for “for instance”, and “i.e.,” means “that is” or “in other words”. WAP3205 User’s Guide 5 Document Conventions Icons Used in Figures Figures in this User’s Guide may use the following generic icons. The WAP3205 icon is not an exact representation of your device. 6 WAP3205 Computer Notebook computer Server Modem Firewall Telephone Switch Router WAP3205 User’s Guide Safety Warnings Safety Warnings • Do NOT use this product near water, for example, in a wet basement or near a swimming pool. • Do NOT expose your device to dampness, dust or corrosive liquids. • Do NOT store things on the device. • Do NOT install, use, or service this device during a thunderstorm. There is a remote risk of electric shock from lightning. • Connect ONLY suitable accessories to the device. • Do NOT open the device or unit. Opening or removing covers can expose you to dangerous high voltage points or other risks. ONLY qualified service personnel should service or disassemble this device. Please contact your vendor for further information. • Make sure to connect the cables to the correct ports. • Place connecting cables carefully so that no one will step on them or stumble over them. • Always disconnect all cables from this device before servicing or disassembling. • Use ONLY an appropriate power adaptor or cord for your device. • Connect the power adaptor or cord to the right supply voltage (for example, 110V AC in North America or 230V AC in Europe). • Do NOT allow anything to rest on the power adaptor or cord and do NOT place the product where anyone can walk on the power adaptor or cord. • Do NOT use the device if the power adaptor or cord is damaged as it might cause electrocution. • If the power adaptor or cord is damaged, remove it from the power outlet. • Do NOT attempt to repair the power adaptor or cord. Contact your local vendor to order a new one. • Do not use the device outside, and make sure all the connections are indoors. There is a remote risk of electric shock from lightning. • Do NOT obstruct the device ventilation slots, as insufficient airflow may harm your device. • Antenna Warning! This device meets ETSI and FCC certification requirements when using the included antenna(s). Only use the included antenna(s). • If you wall mount your device, make sure that no electrical lines, gas or water pipes will be damaged. Your product is marked with this symbol, which is known as the WEEE mark. WEEE stands for Waste Electronics and Electrical Equipment. It means that used electrical and electronic products should not be mixed with general waste. Used electrical and electronic equipment should be treated separately. WAP3205 User’s Guide 7 Safety Warnings 8 WAP3205 User’s Guide Contents Overview Contents Overview Introduction ............................................................................................................................ 17 Getting to Know Your WAP3205 ................................................................................................ 19 Introducing the Web Configurator .............................................................................................. 23 Monitor ....................................................................................................................................... 29 WAP3205 Modes ....................................................................................................................... 33 Easy Mode ................................................................................................................................. 35 Access Point Mode .................................................................................................................... 45 Client Mode ............................................................................................................................... 53 Universal Repeater Mode .......................................................................................................... 65 Tutorials ..................................................................................................................................... 73 Configuration ......................................................................................................................... 81 Wireless LAN ............................................................................................................................. 83 LAN .......................................................................................................................................... 101 Maintenance and Troubleshooting ..................................................................................... 105 Maintenance ............................................................................................................................ 107 Troubleshooting ........................................................................................................................119 Product Specifications ............................................................................................................. 125 Appendices and Index ......................................................................................................... 129 WAP3205 User’s Guide 9 Contents Overview 10 WAP3205 User’s Guide Table of Contents Table of Contents About This User's Guide .......................................................................................................... 3 Document Conventions............................................................................................................ 5 Safety Warnings........................................................................................................................ 7 Contents Overview ................................................................................................................... 9 Table of Contents.................................................................................................................... 11 Part I: Introduction................................................................................. 17 Chapter 1 Getting to Know Your WAP3205 ............................................................................................ 19 1.1 Overview .............................................................................................................................. 19 1.2 Applications ......................................................................................................................... 19 1.3 Ways to Manage the WAP3205 ........................................................................................... 19 1.4 Good Habits for Managing the WAP3205 ............................................................................ 20 1.5 LEDs .................................................................................................................................... 20 Chapter 2 Introducing the Web Configurator ........................................................................................ 23 2.1 Overview .............................................................................................................................. 23 2.2 Accessing the Web Configurator ......................................................................................... 23 2.2.1 Login Screen .............................................................................................................. 24 2.2.2 Password Screen ....................................................................................................... 25 2.2.3 Home Screen ............................................................................................................. 25 2.3 Resetting the WAP3205 ...................................................................................................... 27 2.3.1 Procedure to Use the Reset Button ........................................................................... 28 Chapter 3 Monitor..................................................................................................................................... 29 3.1 Overview .............................................................................................................................. 29 3.2 What You Can Do ................................................................................................................ 29 3.3 Log ....................................................................................................................................... 29 3.4 Packet Statistics ............................................................................................................... 30 3.5 WLAN Station Status WAP3205 User’s Guide ....................................................................................................... 32 11 Table of Contents Chapter 4 WAP3205 Modes ..................................................................................................................... 33 4.1 Overview .............................................................................................................................. 33 4.1.1 Web Configurator Modes ........................................................................................... 33 4.1.2 Device Modes ............................................................................................................ 33 Chapter 5 Easy Mode ............................................................................................................................... 35 5.1 Overview .............................................................................................................................. 35 5.2 What You Can Do ................................................................................................................ 36 5.3 What You Need to Know ...................................................................................................... 36 5.4 Navigation Panel ................................................................................................................. 37 5.5 Network Map ....................................................................................................................... 37 5.6 Control Panel ....................................................................................................................... 38 5.6.1 Wireless Security ....................................................................................................... 39 5.6.2 WPS ........................................................................................................................... 41 5.7 Status Screen in Easy Mode ............................................................................................... 42 Chapter 6 Access Point Mode ................................................................................................................. 45 6.1 Overview .............................................................................................................................. 45 6.2 What You Can Do ................................................................................................................ 45 6.3 What You Need to Know ...................................................................................................... 45 6.3.1 Setting your WAP3205 to AP Mode ........................................................................... 46 6.3.2 Accessing the Web Configurator in Access Point Mode ............................................ 46 6.3.3 Configuring your WLAN, LAN and Maintenance Settings .......................................... 47 6.4 AP Mode Status Screen ...................................................................................................... 47 Chapter 7 Client Mode.............................................................................................................................. 53 7.1 Overview .............................................................................................................................. 53 7.2 What You Can Do ................................................................................................................ 53 7.3 What You Need to Know ...................................................................................................... 54 7.3.1 Setting your WAP3205 to Client Mode ....................................................................... 54 7.3.2 Accessing the Web Configurator in Client Mode ........................................................ 54 7.4 Client Mode Status Screen .................................................................................................. 55 7.5 Wireless LAN Profile Screen ............................................................................................... 57 7.5.1 Adding a New WLAN Profile ...................................................................................... 58 7.5.2 Site Survey Screen .................................................................................................... 62 7.5.3 WPS Screen ............................................................................................................... 63 Chapter 8 Universal Repeater Mode ....................................................................................................... 65 12 WAP3205 User’s Guide Table of Contents 8.1 Overview .............................................................................................................................. 65 8.2 What You Can Do ................................................................................................................ 65 8.3 What You Need to Know ...................................................................................................... 66 8.3.1 Setting your WAP3205 to Universal Repeater Mode ................................................. 66 8.3.2 Accessing the Web Configurator in Universal Repeater Mode .................................. 66 8.4 Universal Repeater Mode Status Screen ............................................................................ 67 8.5 Universal Repeater Screen ................................................................................................. 69 8.5.1 No Security ................................................................................................................. 70 8.5.2 Static WEP ................................................................................................................. 70 8.5.3 WPA(2)-PSK .............................................................................................................. 72 Chapter 9 Tutorials ................................................................................................................................... 73 9.1 Overview .............................................................................................................................. 73 9.2 Connecting to the Internet from an Access Point ................................................................ 73 9.3 Configuring Wireless Security Using WPS .......................................................................... 73 9.3.1 Push Button Configuration (PBC) .............................................................................. 74 9.3.2 PIN Configuration ....................................................................................................... 75 9.4 Enabling and Configuring Wireless Security (No WPS) ...................................................... 77 9.4.1 Configure Your Notebook ........................................................................................... 79 Part II: Configuration ............................................................................. 81 Chapter 10 Wireless LAN........................................................................................................................... 83 10.1 Overview ............................................................................................................................ 83 10.2 What You Can Do .............................................................................................................. 84 10.3 What You Should Know ..................................................................................................... 84 10.3.1 Wireless Security Overview ..................................................................................... 84 10.4 General Wireless LAN Screen .......................................................................................... 87 10.5 Wireless Security Screen .................................................................................................. 88 10.5.1 No Security ............................................................................................................... 88 10.5.2 WEP Encryption ....................................................................................................... 89 10.5.3 WPA-PSK/WPA2-PSK .............................................................................................. 91 10.6 MAC Filter .......................................................................................................................... 92 10.7 Wireless LAN Advanced Screen ....................................................................................... 93 10.8 Quality of Service (QoS) Screen ....................................................................................... 95 10.9 WPS Screen ...................................................................................................................... 95 10.10 WPS Station Screen ........................................................................................................ 97 10.11 Scheduling Screen ........................................................................................................... 97 10.12 WDS Screen .................................................................................................................... 99 WAP3205 User’s Guide 13 Table of Contents Chapter 11 LAN......................................................................................................................................... 101 11.1 Overview .......................................................................................................................... 101 11.2 What You Can Do ............................................................................................................ 101 11.3 What You Need To Know ................................................................................................. 102 11.3.1 LAN TCP/IP ............................................................................................................ 102 11.3.2 IP Alias ................................................................................................................... 102 11.4 LAN IP Screen ................................................................................................................. 103 11.5 IP Alias Screen ................................................................................................................ 104 Part III: Maintenance and Troubleshooting ....................................... 105 Chapter 12 Maintenance .......................................................................................................................... 107 12.1 Overview .......................................................................................................................... 107 12.2 What You Can Do ............................................................................................................ 107 12.3 General Screen .............................................................................................................. 108 12.4 Password Screen ............................................................................................................ 108 12.5 Time Setting Screen ........................................................................................................ 109 12.6 Firmware Upgrade Screen ...............................................................................................111 12.7 Configuration Backup/Restore Screen .............................................................................113 12.8 Reset/Restart Screen .......................................................................................................114 12.9 System Operation Mode Overview ...................................................................................115 12.10 Sys Op Mode Screen .....................................................................................................116 Chapter 13 Troubleshooting.................................................................................................................... 119 13.1 Power, Hardware Connections, and LEDs .......................................................................119 13.2 WAP3205 Access and Login ........................................................................................... 120 13.3 Internet Access ................................................................................................................ 122 13.4 Resetting the WAP3205 to Its Factory Defaults .............................................................. 123 13.5 Wireless Router/AP Troubleshooting ............................................................................... 124 Chapter 14 Product Specifications ......................................................................................................... 125 14.1 Wall-mounting Instructions .............................................................................................. 126 Part IV: Appendices and Index ........................................................... 129 Appendix A Pop-up Windows, JavaScripts and Java Permissions ...................................... 131 14 WAP3205 User’s Guide Table of Contents Appendix B IP Addresses and Subnetting ........................................................................... 139 Appendix C Setting up Your Computer’s IP Address ........................................................... 149 Appendix D Wireless LANs .................................................................................................. 167 Appendix E Common Services............................................................................................. 179 Appendix F Legal Information .............................................................................................. 183 Index....................................................................................................................................... 191 WAP3205 User’s Guide 15 Table of Contents 16 WAP3205 User’s Guide P ART I Introduction Getting to Know Your WAP3205 (19) Connection Wizard (25) Introducing the Web Configurator (23) WAP3205 Modes (33) Monitor (29) Tutorials (73) 17 18 CHAPTER 1 Getting to Know Your WAP3205 1.1 Overview This chapter introduces the main features and applications of the WAP3205. The WAP3205 extends the range of your existing wired network without additional wiring, providing easy network access to mobile users. You can set up a wireless network with other IEEE 802.11b/g/n compatible devices. 1.2 Applications Your can create the following networks using the WAP3205: • Wired. You can connect to a broadband modem/router for Internet access and/ or connect network devices via the Ethernet ports of the WAP3205 so that they can communicate with each other and access the Internet. • Wireless. Wireless clients can connect to the WAP3205 to access network resources. Figure 1 WAP3205 Network 1.3 Ways to Manage the WAP3205 Use any of the following methods to manage the WAP3205. • Web Configurator. This is recommended for everyday management of the WAP3205 using a (supported) web browser. WAP3205 User’s Guide 19 Chapter 1 Getting to Know Your WAP3205 • WPS (Wi-Fi Protected Setup) button. You can use the WPS button or the WPS section of the Web Configurator to set up a wireless network with your ZyXEL Device. 1.4 Good Habits for Managing the WAP3205 Do the following things regularly to make the WAP3205 more secure and to manage the WAP3205 more effectively. • Change the password. Use a password that’s not easy to guess and that consists of different types of characters, such as numbers and letters. • Write down the password and put it in a safe place. • Back up the configuration (and make sure you know how to restore it). Restoring an earlier working configuration may be useful if the device becomes unstable or even crashes. If you forget your password, you will have to reset the WAP3205 to its factory default settings. If you backed up an earlier configuration file, you would not have to totally re-configure the WAP3205. You could simply restore your last configuration. 1.5 LEDs Figure 2 Front Panel The following table describes the LEDs and the WPS button. Table 1 Front Panel LEDs and WPS Button LED COLOR STATUS DESCRIPTION POWER Green On The WAP3205 is receiving power and functioning properly. Off The WAP3205 is not receiving power. On The WAP3205 has a successful 10/100MB Ethernet connection. Blinking The WAP3205 is sending/receiving data through the LAN. Off The LAN is not connected. LAN 1-2 20 Green WAP3205 User’s Guide Chapter 1 Getting to Know Your WAP3205 Table 1 Front Panel LEDs and WPS Button LED COLOR STATUS DESCRIPTION WLAN Green On The WAP3205 is ready, but is not sending/ receiving data through the wireless LAN. Blinking The WAP3205 is sending/receiving data through the wireless LAN. Off The wireless LAN is not ready or has failed. On WPS is enabled. Blinking The WAP3205 is negotiating a WPS connection with a wireless client. Off The wireless LAN is not ready or has failed. WPS WAP3205 User’s Guide Green 21 Chapter 1 Getting to Know Your WAP3205 22 WAP3205 User’s Guide CHAPTER 2 Introducing the Web Configurator 2.1 Overview This chapter describes how to access the WAP3205 Web Configurator and provides an overview of its screens. The Web Configurator is an HTML-based management interface that allows easy setup and management of the WAP3205 via Internet browser. Use Internet Explorer 6.0 and later or Netscape Navigator 7.0 and later versions or Safari 2.0 or later versions. The recommended screen resolution is 1024 by 768 pixels. In order to use the Web Configurator you need to allow: • Web browser pop-up windows from your device. Web pop-up blocking is enabled by default in Windows XP SP (Service Pack) 2. • JavaScripts (enabled by default). • Java permissions (enabled by default). Refer to the Troubleshooting chapter (Chapter 13 on page 119) to see how to make sure these functions are allowed in Internet Explorer. 2.2 Accessing the Web Configurator 1 Make sure your WAP3205 hardware is properly connected and prepare your computer or computer network to connect to the WAP3205 (refer to the Quick Start Guide). 2 Launch your web browser. 3 Type "http://192.168.1.2" as the website address. Your computer must be in the same subnet in order to access this website address. WAP3205 User’s Guide 23 Chapter 2 Introducing the Web Configurator 2.2.1 Login Screen The Web Configurator initially displays the following login screen. Figure 3 Login screen The following table describes the labels in this screen. Table 2 Login screen LABEL DESCRIPTION Password Type "1234" (default) as the password. Language Select the language you want to use to configure the Web Configurator. Click Login. This shows the current weather, either in celsius or fahrenheit, of the city you specify in Section 2.2.3.1 on page 26. This shows the time (hh:mm:ss) and date (yyyy:mm:dd) of the timezone you select in Section 2.2.3.2 on page 27 or Section 12.5 on page 109. The time is in 24-hour format, for example 15:00 is 3:00 PM. 24 WAP3205 User’s Guide Chapter 2 Introducing the Web Configurator 2.2.2 Password Screen You should see a screen asking you to change your password (highly recommended) as shown next. Figure 4 Change Password Screen The following table describes the labels in this screen. Table 3 Change Password Screen LABEL DESCRIPTION New Password Type a new password. Retype to Confirm Retype the password for confirmation. Apply Click Apply to save your changes back to the WAP3205. Ignore Click Ignore if you do not want to change the password this time. Note: The management session automatically times out when the time period set in the Administrator Inactivity Timer field expires (default five minutes; go to Chapter 12 on page 107 to change this). Simply log back into the WAP3205 if this happens. 2.2.3 Home Screen If you have previously logged into the Web Configurator but did not click Logout, you may be redirected to the Home screen. You can also open this screen by clicking Home ( Mode or Expert Mode screens. WAP3205 User’s Guide or ) in the Easy 25 Chapter 2 Introducing the Web Configurator The Home screen displays as follows. Figure 5 Home Screen The following table describes the labels in this screen. Table 4 Home Screen LABEL DESCRIPTION Go Click this to open the Easy mode Web Configurator. Language Select a language to go to the Easy mode Web Configurator in that language and click Login. (This is just an example). This shows the current weather, either in celsius or fahrenheit, of the city you specify in Section 2.2.3.1 on page 26. (This is just an example). This shows the time (hh:mm:ss) and date (yyyy:mm:dd) of the timezone you select in Section 2.2.3.2 on page 27 or Section 12.5 on page 109. 2.2.3.1 Weather Edit You can change the temperature unit and select the location for which you want to know the weather. Click the icon to change the Weather display. Figure 6 Change Weather 26 WAP3205 User’s Guide Chapter 2 Introducing the Web Configurator The following table describes the labels in this screen. Table 5 Change Weather LABEL DESCRIPTION o Choose which temperature unit you want the WAP3205 to display. o C or F Change Location Select the location for which you want to know the weather. If Finish Click this to apply the settings and refresh the date and time display. the city you want is not listed, choose one that is closest to it. 2.2.3.2 Time/Date Edit One timezone can cover more than one country. You can choose a particular country in which the WAP3205 is located and have the WAP3205 display and use the current time and date for its logs. Click the icon to change the Weather display. Figure 7 Change Password Screen The following table describes the labels in this screen. Table 6 Change Password Screen LABEL DESCRIPTION Change time zone Select the specific country whose current time and date you want the WAP3205 to display. Finish Click this to apply the settings and refresh the weather display. Note: You can also edit the timezone in Section 12.5 on page 109. 2.3 Resetting the WAP3205 If you forget your password or IP address, or you cannot access the Web Configurator, you will need to use the RESET button at the back of the WAP3205 to reload the factory-default configuration file. This means that you will lose all configurations that you had previously saved, the password will be reset to “1234” and the IP address will be reset to “192.168.1.2”. WAP3205 User’s Guide 27 Chapter 2 Introducing the Web Configurator 2.3.1 Procedure to Use the Reset Button 28 1 Make sure the power LED is on. 2 Press the RESET button for longer than 1 second to restart/reboot the WAP3205. 3 Press the RESET button for longer than five seconds to set the WAP3205 back to its factory-default configurations. WAP3205 User’s Guide CHAPTER 3 Monitor 3.1 Overview This chapter discusses read-only information related to the device state of the WAP3205. Note: To access the Monitor screens, you can also click the links in the Summary table of the Status screen to view the packets sent/received as well as the status of clients connected to the WAP3205. 3.2 What You Can Do • Use the Log screen (Section 3.3 on page 29) to view the logs for the categories such as system maintenance, system errors, and so on. • use the Packet Statistics screen (Section 3.4 on page 30) to view port status, packet specific statistics, the "system up time" and so on. • Use the WLAN Station Status screen (Section 3.5 on page 32) to view the wireless stations that are currently associated to the WAP3205. 3.3 Log Use the View Log screen to see the logged messages for the WAP3205. Log entries in red indicate system error logs. The log wraps around and deletes the old entries after it fills. WAP3205 User’s Guide 29 Chapter 3 Monitor Click Monitor > Log. Figure 8 Monitor > Log The following table describes the labels in this screen. Table 7 Monitor > Log LABEL DESCRIPTION # This field is a sequential value and is not associated with a specific entry. Time This field displays the time the log was recorded. Message This field states the reason for the log. Refresh Click Refresh to renew the log screen. Clear Click Clear to delete all the logs. 3.4 Packet Statistics Click the Packet Statistics (Details...) hyperlink in the Status screen or Monitor > Packet Statistics. Read-only information here includes port status, 30 WAP3205 User’s Guide Chapter 3 Monitor packet specific statistics and the "system up time". The Poll Interval(s) field is configurable and is used for refreshing the screen. Figure 9 Summary: Packet Statistics The following table describes the labels in this screen. Table 8 Summary: Packet Statistics LABEL DESCRIPTION Port This is the WAP3205’s port type. Status For the LAN ports, this displays the port speed or Down when the line is disconnected. For the WLAN, it displays the maximum transmission rate when the WLAN is enabled and Down when the WLAN is disabled. TxPkts This is the number of transmitted packets on this port. RxPkts This is the number of received packets on this port. Collisions This is the number of collisions on this port. Tx B/s This displays the transmission speed in bytes per second on this port. Rx B/s This displays the reception speed in bytes per second on this port. Up Time This is the total time the WAP3205 has been for each session. System Up Time This is the total time the WAP3205 has been on. Poll Interval(s) Enter the time interval in seconds for refreshing statistics in this field. Set Interval Click this button to apply the new poll interval you entered in the Poll Interval(s) field. Stop Click Stop to stop refreshing statistics. WAP3205 User’s Guide 31 Chapter 3 Monitor 3.5 WLAN Station Status Click the WLAN Station Status (Details...) hyperlink in the Status screen or Monitor > WLAN Station Status. View the wireless stations that are currently associated to the WAP3205 in the Association List. Association means that a wireless client (for example, your network or computer with a wireless network card) has connected successfully to the AP (or wireless router) using the same SSID, channel and security settings. Note: This screen is not available when the WAP3205 is in Client mode. Figure 10 Summary: Wireless Association List The following table describes the labels in this screen. Table 9 Summary: Wireless Association List 32 LABEL DESCRIPTION # This is the index number of an associated wireless station. MAC Address This field displays the MAC address of an associated wireless station. Association Time This field displays the time a wireless station first associated with the WAP3205’s WLAN network. Refresh Click Refresh to reload the list. WAP3205 User’s Guide CHAPTER 4 WAP3205 Modes 4.1 Overview This chapter introduces the different modes available on your WAP3205. First, the term “mode” refers to two things in this User’s Guide. • Web Configurator mode. This refers to the Web Configurator interface you want to use for editing WAP3205 features. • Device mode. This is the operating mode of your WAP3205, or simply how the WAP3205 is being used in the network. 4.1.1 Web Configurator Modes This refers to the configuration interface of the Web Configurator, which has two modes: • Easy. The Web Configurator shows this mode by default. Refer to Chapter 5 on page 35 for more information on the screens in this mode. This interface may be sufficient for users who just want to use the device. • Expert. Advanced users can change to this mode to customize all the functions of the WAP3205. Click Expert Mode after logging into the Web Configurator. The User’s Guide Chapter 2 on page 23 through Chapter 12 on page 107 discusses the screens in this mode. 4.1.2 Device Modes This refers to the operating mode of the WAP3205, which can act as a: • Access Point. Use this mode if you want to extend your network by allowing network devices to connect to the WAP3205 wirelessly. Go to Section 6.4 on page 47 view the Status screen in this mode. • Client. Use this mode if there is an existing wireless router or access point in the network to which you want to connect your local network. Go to Section 7.4 on page 55 to view the Status screen in this mode. WAP3205 User’s Guide 33 Chapter 4 WAP3205 Modes • Universal Repeater. In this mode, the WAP3205 can be an access point and a wireless client at the same time. Use this mode if there is an existing wireless router or access point in your network and you also want to allow clients to connect to the WAP3205 wirelessly. Go to Section 6.4 on page 47 to view the Status screen in this mode. The following figure is a simple illustration of the device configuration modes of the WAP3205. Figure 11 Device Mode Example For more information on these modes and to change the mode of your WAP3205, refer to Chapter 12 on page 115. The menu for changing device modes is available in Expert mode only. Note: Choose your Device Mode carefully to avoid having to change it later. In Client mode, you should know the SSID and wireless security details of the access point to which you want to connect. 34 WAP3205 User’s Guide CHAPTER 5 Easy Mode 5.1 Overview The Web Configurator is set to Easy Mode by default. You can configure several key features of the WAP3205 in this mode. This mode is useful to users who are not fully familiar with some features that are usually intended for network administrators. When you log in to the Web Configurator, the following screen opens. Figure 12 Easy Mode: Network Map Navigation Panel Network Map Go to Status Screen Control Panel WAP3205 User’s Guide 35 Chapter 5 Easy Mode Click Status to open the following screen screen. Figure 13 Easy Mode: Status Screen Navigation Panel Go to Network Map Screen Status Screen Control Panel 5.2 What You Can Do You can do the following in this mode: • Use this Navigation Panel (Section 5.4 on page 37) to opt out of the Easy mode. • Use the Network Map screen (Section 5.5 on page 37) to check if your WAP3205 can ping the gateway and whether it is connected to the Internet. The Network Map screen is not applicable when the WAP3205 is in Client Mode. • Use the Control Panel (Section 5.6 on page 38) to configure wireless security. • Use the Status Screen screen (Section 5.7 on page 42) to view read-only information about the WAP3205, including the LAN IP, MAC Address of the WAP3205 and the firmware version. 5.3 What You Need to Know The Network Map screen is not applicable and Wireless Security in the control panel is not configurable when the WAP3205 is in Client mode. 36 WAP3205 User’s Guide Chapter 5 Easy Mode 5.4 Navigation Panel Use this navigation panel to opt out of the Easy mode. Figure 14 Control Panel The following table describes the labels in this screen. Table 10 Control Panel ITEM DESCRIPTION Home Click this to go to the Login page. Expert Mode Click this to change to Expert mode and customize features of the WAP3205. Logout Click this to end the Web Configurator session. 5.5 Network Map Note: The Network MAP is viewable by Windows XP (need to install patch), Windows Vista and Windows 7 users only. For Windows XP (Service Pack 2) users, you can see the network devices connected to the WAP3205 by downloading the LLTD (Link Layer Topology Discovery) patch from the Microsoft Website. Note: Don’t worry if the Network Map does not display in your web browser. This feature may not be supported by your system. You can still configure the Control Panel (Section 5.6 on page 38) in the Easy Mode and the WAP3205 features that you want to use in the Expert Mode. Note: The Network Map is not applicable when the WAP3205 is in Client Mode. WAP3205 User’s Guide 37 Chapter 5 Easy Mode When you log into the Web Configurator, the Network Map is shown as follows. Figure 15 Network Map The line connecting the WAP3205 to the gateway becomes green when the WAP3205 is able to ping the gateway. It becomes red when the ping initiating from the WAP3205 does not get a response from the gateway. The same rule applies to the line connecting the gateway to the Internet. You can also view the devices (represented by icons indicating the kind of network device) connected to the WAP3205, including those connecting wirelessly. Rightclick on the WAP3205 icon to refresh the network map and go to the Wizard. Right click on the other icons to view information about the device. 5.6 Control Panel The features configurable in Easy Mode are shown in the Control Panel. Figure 16 Control Panel Click the feature to open a screen where you can edit its settings. 38 WAP3205 User’s Guide Chapter 5 Easy Mode The following table describes the labels in this screen. Table 11 Control Panel ITEM DESCRIPTION Wireless Security Click this to configure the wireless security, such as SSID, security mode and WPS key on your WAP3205. Refer to Section 5.6.1 on page 39 to see this screen. 5.6.1 Wireless Security Use this screen to configure security for your the Wireless LAN. You can enter the SSID and select the wireless security mode in the following screen. Note: Wireless Security in the control panel is not configurable when the WAP3205 is in Client Mode. Figure 17 Wireless Security WAP3205 User’s Guide 39 Chapter 5 Easy Mode The following table describes the general wireless LAN labels in this screen. Table 12 Wireless Security LABEL DESCRIPTION Wireless Network Name (SSID) (Service Set IDentity) The SSID identifies the Service Set with which a wireless station is associated. Wireless stations associating to the access point (AP) must have the same SSID. Enter a descriptive name (up to 32 keyboard characters) for the wireless LAN. The default SSID is WAP3205. Security mode Select WPA-PSK or WPA2-PSK to add security on this wireless network. The wireless clients which want to associate to this network must have same wireless security settings as this device. After you select to use a security, additional options appears in this screen. Select No Security to allow any client to connect to this network without authentication. Wireless password This field appears when you choose wither WPA-PSK or WPA2-PSK as the security mode. Type a pre-shared key from 8 to 63 case-sensitive keyboard characters. Verify password Type the password again to confirm. Apply Click Apply to save your changes back to the WAP3205. Cancel Click Cancel to close this screen. WPS Click this to configure the WPS screen. You can transfer the wireless settings configured here (Wireless Security screen) to another wireless device that supports WPS. 40 WAP3205 User’s Guide Chapter 5 Easy Mode 5.6.2 WPS Use this screen to add a wireless station to the network with the WAP3205’s first SSID using WPS. Click WPS in the Wireless Security to open the following screen. Figure 18 Wireless Security: WPS The following table describes the labels in this screen. Table 13 Wireless Security: WPS LABEL DESCRIPTION Wireless Security Click this to go back to the Wireless Security screen. WPS Create a secure wireless network simply by pressing the button. The WAP3205 scans for a WPS-enabled device within the range and performs wireless security information synchronization. Note: After you click the WPS button on this screen, you have to press a similar button in the wireless station utility within 2 minutes. To add the second wireless station, you have to press these buttons on both device and the wireless station again after the first 2 minutes. WAP3205 User’s Guide 41 Chapter 5 Easy Mode Table 13 Wireless Security: WPS LABEL DESCRIPTION Register Create a secure wireless network simply by entering a wireless client's PIN (Personal Identification Number) in the WAP3205’s interface and pushing this button. Type the same PIN number generated in the wireless station’s utility. Then click Register to associate to each other and perform the wireless security information synchronization. Exit Click Exit to close this screen. 5.7 Status Screen in Easy Mode In the Network Map screen, click Status to view read-only information about the WAP3205. Figure 19 Status Screen in Easy Mode The following table describes the labels in this screen. Table 14 Status Screen in Easy Mode ITEM DESCRIPTION Name This is the name of the WAP3205 in the network. You can change this in the Maintenance > General screen in Section 12.3 on page 108. Time This is the current system date and time. The date is in YYYY:MM:DD (Year-Month-Day) format. The time is in HH:MM:SS (Hour:Minutes:Seconds) format. LAN IP This is the IP address of the LAN port. MAC Address This is the MAC address of the WAP3205. Firmware Version This shows the firmware version of the WAP3205. The firmware version format shows the trunk version, model code and release number. 42 WAP3205 User’s Guide Chapter 5 Easy Mode Table 14 Status Screen in Easy Mode ITEM DESCRIPTION Wireless Network Name (SSID) This shows the SSID of the wireless network. You can configure this in the Wireless Security screen (Section 5.6.1 on page 39; Section 10.3.1.1 on page 85). Security This shows the wireless security used by the WAP3205. WAP3205 User’s Guide 43 Chapter 5 Easy Mode 44 WAP3205 User’s Guide CHAPTER 6 Access Point Mode 6.1 Overview The WAP3205 is set to access point mode by default. In this mode your WAP3205 bridges a wired network (LAN) and wireless LAN (WLAN) in the same subnet. See the figure below for an example. Figure 20 Wireless Internet Access in Access Point Mode Note: See Chapter 9 on page 73 for an example of setting up a wireless network in Access Point mode. 6.2 What You Can Do • Use the Status screen (Section 6.4 on page 47) to view read-only information about your WAP3205. • Use the LAN screen (Chapter 11 on page 101) to set the IP address for your WAP3205 acting as an access point. • Use the Wireless LAN screens (Chapter 10 on page 83) to configure the wireless settings and wireless security between the wireless clients and the WAP3205. 6.3 What You Need to Know See Chapter 9 on page 73 for a tutorial on setting up a network with the WAP3205 as an access point. WAP3205 User’s Guide 45 Chapter 6 Access Point Mode 6.3.1 Setting your WAP3205 to AP Mode 1 Log into the Web Configurator if you haven’t already. See the Quick start Guide for instructions on how to do this. 2 To use your WAP3205 as an access point, go to Maintenance > Sys OP Mode and select Access Point mode. Figure 21 Changing to Access Point mode Note: You have to log in to the Web Configurator again when you change modes. As soon as you do, your WAP3205 is already in Access Point mode. 6.3.2 Accessing the Web Configurator in Access Point Mode Log in to the Web Configurator in Access Point mode, do the following: 1 Connect your computer to the LAN port of the WAP3205. 2 The default IP address of the WAP3205 is “192.168.1.2”. In this case, your computer must have an IP address in the range between “192.168.1.3” and “192.168.1.254”. 3 Click Start > Run on your computer in Windows. Type “cmd” in the dialog box. Enter “ipconfig” to show your computer’s IP address. If your computer’s IP address is not in the correct range then see Appendix C on page 149 for information on changing your computer’s IP address. 4 After you’ve set your computer’s IP address, open a web browser such as Internet Explorer and type “192.168.1.2” as the web address in your web browser. Note: After clicking Login, the Easy mode appears. Refer to Section on page 35 for the Easy mode screens. Change to Expert mode to see the screens described in the sections following this. 46 WAP3205 User’s Guide Chapter 6 Access Point Mode 6.3.3 Configuring your WLAN, LAN and Maintenance Settings • See Configuration (81) for information on the configuring your wireless network and LAN settings. • See Maintenance and Troubleshooting (105) for information on configuring your Maintenance settings. 6.4 AP Mode Status Screen Click to open the Status screen. Figure 22 Status Screen: Access Point Mode The following table describes the icons shown in the Status screen. Table 15 Status Screen Icon Key: Access Point Mode ICON DESCRIPTION Click this icon to view copyright and a link for related product information. Click this icon to go to Easy Mode. See Chapter 5 on page 35. Click this to go to the Home page. See Chapter 3 on page 29. WAP3205 User’s Guide 47 Chapter 6 Access Point Mode Table 15 Status Screen Icon Key: Access Point Mode (continued) ICON DESCRIPTION Select a number of seconds or None from the drop-down list box to refresh all screen statistics automatically at the end of every time interval or to not refresh the screen statistics. Click this button to refresh the status screen statistics. Click this icon to see the Status page. The information in this screen depends on the device mode you select. Click this icon to see the Monitor navigation menu. Click this icon to see the Configuration navigation menu. Click this icon to see the Maintenance navigation menu. The following table describes the labels shown in the Status screen. Table 16 Status Screen: Access Point Mode LABEL DESCRIPTION Logout Click this at any time to exit the Web Configurator. Device Information Host Name This is the System Name you enter in the Maintenance > General screen. It is for identification purposes. Firmware Version This is the firmware version and the date created. Sys OP Mode This is the device mode (Section 4.1.2 on page 33) to which the WAP3205 is set - Access Point Mode. LAN Information MAC Address This shows the LAN Ethernet adapter MAC Address of your device. IP Address This shows the LAN port’s IP address. IP Subnet Mask This shows the LAN port’s subnet mask. Default Gateway This shows the gateway IP address. DHCP This shows the LAN port’s DHCP role - Client or None. WLAN Information 48 WLAN OP Mode This is the device mode (Section 4.1.2 on page 33) to which the WAP3205’s wireless LAN is set - Access Point Mode. MAC Address This shows the wireless adapter MAC Address of your device. Status This shows the current status of the Wireless LAN - ON. Name (SSID) This shows a descriptive name used to identify the WAP3205 in the wireless LAN. Channel This shows the channel number which you select manually or the WAP3205 automatically scans and selects. Operating Channel This shows the channel number which the WAP3205 is currently using over the wireless LAN. Security Mode This shows the level of wireless security the WAP3205 is using. 802.11 Mode This shows the wireless standard. WAP3205 User’s Guide Chapter 6 Access Point Mode Table 16 Status Screen: Access Point Mode LABEL DESCRIPTION WPS This displays Configured when the WPS has been set up. This displays Unconfigured if the WPS has not been set up. Click the status to display Network > Wireless LAN > WPS screen. Interface Status Interface This displays the WAP3205 port types. The port types are: LAN and WLAN. Status For the LAN ports, this field displays Down (line is down) or Up (line is up or connected). For the WLAN, it displays Up when the WLAN is enabled or Down when the WLAN is disabled. Rate For the LAN ports, this displays the port speed or N/A when the line is disconnected. For the WLAN, it displays the maximum transmission rate when the WLAN is enabled and N/A when the WLAN is disabled. System Status Item This column shows the type of data the WAP3205 is recording. Data This column shows the actual data recorded by the WAP3205. System Up Time This is the total time the WAP3205 has been on. Current Date/Time This field displays your WAP3205’s present date and time. System Resource CPU Usage This displays what percentage of the WAP3205’s processing ability is currently used. When this percentage is close to 100%, the WAP3205 is running at full load, and the throughput is not going to improve anymore. If you want some applications to have more throughput, you should turn off other applications (for example, using bandwidth management. Memory Usage This shows what percentage of the heap memory the WAP3205 is using. System Setting Configuration Mode This shows the web configurator mode you are viewing - Expert. Summary Packet Statistics Click Details... to go to the Monitor > Packet Statistics screen (Section 3.4 on page 30). Use this screen to view port status and packet specific statistics. WLAN Station Status Click Details... to go to the Monitor > WLAN Station Status screen (Section 3.5 on page 32). Use this screen to view the wireless stations that are currently associated to the WAP3205. 6.4.0.1 Navigation Panel Use the menu in the navigation panel to configure WAP3205 features in Access Point mode. WAP3205 User’s Guide 49 Chapter 6 Access Point Mode The following screen and table show the features you can configure in Access Point mode. Figure 23 Menu: Access Point Mode The following table describes the sub-menus. Table 17 Navigation Panel: Access Point Mode LINK TAB Status FUNCTION This screen shows the WAP3205’s general device, system and interface status information. Use this screen to access the wizard, and summary statistics tables. MONITOR Log Use this screen to view the list of activities recorded by your WAP3205. Packet Statistics Use this screen to view port status and packet specific statistics. WLAN Station Status Use this screen to view the wireless stations that are currently associated to the WAP3205. CONFIGURATION Network 50 WAP3205 User’s Guide Chapter 6 Access Point Mode Table 17 Navigation Panel: Access Point Mode LINK Wireless LAN LAN TAB FUNCTION General Use this screen to configure general wireless LAN settings. Security Use this screen to configure wireless security settings. MAC Filter Use the MAC filter screen to configure the WAP3205 to block access to devices or block the devices from accessing the WAP3205. Advanced This screen allows you to configure advanced wireless settings. QoS Use this screen to configure Wi-Fi Multimedia Quality of Service (WMM QoS). WMM QoS allows you to prioritize wireless traffic according to the delivery requirements of individual services. WPS Use this screen to configure WPS. WPS Station Use this screen to add a wireless station using WPS. Scheduling Use this screen to schedule the times the Wireless LAN is enabled. WDS Use this screen to set up Wireless Distribution System (WDS) on your WAP3205. IP Use this screen to configure LAN IP address and subnet mask. IP Alias Use this screen to have the WAP3205 apply IP alias to create LAN subnets. MAINTENANCE General Use this screen to view and change administrative settings such as system and domain names. Password Password Setup Use this screen to change the password of your WAP3205. Time Time Setting Use this screen to change your WAP3205’s time and date. Firmware Upgrade Use this screen to upload firmware to your WAP3205. Backup/ Restore Use this screen to backup and restore the configuration or reset the factory defaults to your WAP3205. Reset/ Restart Sys OP Mode WAP3205 User’s Guide Restart This screen allows you to reboot the WAP3205 without turning the power off. This screen allows you to select whether your device acts as an access point, wireless client or both at the same time. 51 Chapter 6 Access Point Mode 52 WAP3205 User’s Guide CHAPTER 7 Client Mode 7.1 Overview Your WAP3205 can act as a wireless client. In wireless client mode, it can connect to an existing network via an access point. Use this mode if you already have an access point or wireless router in your network. In the example below, one WAP3205 (A) is configured as a wireless client and another is used as an access point (B). The WAP3205 has two clients that need to connect to the Internet. The WAP3205 wirelessly connects to the available access point (B). Figure 24 Wireless Client Mode B A After the WAP3205 and the access point connect, the WAP3205 acquires its WAN IP address from the access point. The clients of the WAP3205 can now surf the Internet. 7.2 What You Can Do • Use the Status screen (Section 7.4 on page 55) to view read-only information about your WAP3205. • Use the LAN screen (Chapter 11 on page 101) to set the IP address for your WAP3205. • Use the Wireless LAN screen (Section 7.5 on page 57) to associate your WAP3205 (acting as a wireless client) with an existing access point. WAP3205 User’s Guide 53 Chapter 7 Client Mode 7.3 What You Need to Know With the exception of the Wireless LAN screens, the LAN, Monitor, Configuration and Maintainance screens in Client mode are similar to the ones in Access Point Mode. See Chapter 11 on page 101 through Chapter 12 on page 107 of this User’s Guide. 7.3.1 Setting your WAP3205 to Client Mode 1 Log into the Web Configurator if you haven’t already. See the Quick start Guide for instructions on how to do this. 2 To set your WAP3205 to Client Mode, go to Maintenance > Sys OP Mode and select Client Mode. Figure 25 Changing to Client mode Note: You have to log in to the Web Configurator again when you change modes. As soon as you do, your WAP3205 is already in Client mode. 7.3.2 Accessing the Web Configurator in Client Mode To login to Web Configurator in Client mode, do the following: 1 Connect your computer to the LAN port of the WAP3205. 2 The default IP address of the WAP3205 is “192.168.1.2”. If you did not change this, you can use the same IP address in Client mode. Open a web browser such as Internet Explorer and type “192.168.1.2” as the web address in your web browser. If you changed the IP address of your WAP3205 while in Access Point mode, use this IP address in Client mode. The Client mode IP address is always the same as the Access Point mode IP adderss. Note: After clicking Login, the Easy mode appears. Refer to Chapter 5 on page 35 for the Easy mode screens. Click Expert Mode to see the screens described in the sections following this. 54 WAP3205 User’s Guide Chapter 7 Client Mode 7.4 Client Mode Status Screen Click to open the status screen. Figure 26 Status: Client Mode The following table describes the labels shown in the Status screen. Table 18 Status Screen: Client Mode LABEL DESCRIPTION Logout Click this at any time to exit the Web Configurator. Device Information Host Name This is the System Name you enter in the Maintenance > General screen. It is for identification purposes. Firmware Version This is the firmware version and the date created. Sys OP Mode This is the device mode (Section 4.1.2 on page 33) to which the WAP3205 is set - Client Mode. LAN Information MAC Address This shows the LAN Ethernet adapter MAC Address of your device. IP Address This shows the LAN port’s IP address. IP Subnet Mask This shows the LAN port’s subnet mask. DHCP This shows the LAN port’s DHCP role - Client or None. WLAN Information WLAN OP Mode This is the device mode (Section 4.1.2 on page 33) to which the WAP3205’s wireless LAN is set - Client Mode. MAC Address This shows the wireless adapter MAC Address of your device. WAP3205 User’s Guide 55 Chapter 7 Client Mode Table 18 Status Screen: Client Mode LABEL DESCRIPTION Status This shows the current status of the Wireless LAN - ON. Name (SSID) This shows a descriptive name used to identify the WAP3205 in the wireless LAN. Connect Status This shows whether or not the WAP3205 has successfully associated with an access point - Connected or Disassociated. 802.11 Mode This shows the wireless standard. WPS This displays Configured when the WPS has been set up. This displays Unconfigured if the WPS has not been set up. Click the status to display Network > Wireless LAN > WPS screen. Interface Status Interface This displays the WAP3205 port types. The port types are: LAN and WLAN. Status For the LAN and WAN ports, this field displays Down (line is down) or Up (line is up or connected). For the WLAN, it displays Up when the WLAN is enabled or Down when the WLAN is disabled. Rate For the LAN ports, this displays the port speed or N/A when the line is disconnected. For the WLAN, it displays the maximum transmission rate when the WLAN is enabled and N/A when the WLAN is disabled. System Status Item This column shows the type of data the WAP3205 is recording. Data This column shows the actual data recorded by the WAP3205. System Up Time This is the total time the WAP3205 has been on. Current Date/Time This field displays your WAP3205’s present date and time. System Resource CPU Usage This displays what percentage of the WAP3205’s processing ability is currently used. When this percentage is close to 100%, the WAP3205 is running at full load, and the throughput is not going to improve anymore. If you want some applications to have more throughput, you should turn off other applications (for example, using bandwidth management. Memory Usage This shows what percentage of the heap memory the WAP3205 is using. System Setting Configuration Mode This shows the web configurator mode you are viewing - Expert. Summary Packet Statistics 56 Click Details... to go to the Monitor > Packet Statistics screen (Section 3.4 on page 30). Use this screen to view port status and packet specific statistics. WAP3205 User’s Guide Chapter 7 Client Mode 7.5 Wireless LAN Profile Screen Use this screen to view the wireless LAN profile settings of your WAP3205. Go to Configuration > Wireless LAN > Profile to open the following screen. Figure 27 Client Mode: WLAN > Profile The following table describes the labels in this screen. Table 19 Client Mode: WLAN > Profile LABEL DESCRIPTION Profile List # Select a profile to remove, modify or enable it. Profile This displays the name of the pre-configured profile. indicates the profile is activated and the WAP3205 connects to the specified wireless network. indicates the profile is activated but the specified wireless network is not available or the WAP3205 fails to associate with the wireless network. SSID This displays the SSID of the wireless network with which this profile associates. Channel This displays the channel number used by this profile. Auto means the WAP3205 automatically scans for and selects an available channel. Authentication This displays the authentication method used by this profile. Encryption This displays the data encryption method used by this profile. Network Type This displays the network type (Infrastructure or Ad Hoc) of this profile. Add Click this button to create a new profile. Delete Select a profile and click this button to remove it. Edit Select a profile and click this button to modify it. Activate Select a profile and click this button to enable it. Note: You can activate only one profile at a time. WAP3205 User’s Guide 57 Chapter 7 Client Mode 7.5.1 Adding a New WLAN Profile Use this screen to create a new wireless LAN profile for your WAP3205. Click the Add button in the Configuration > Wireless LAN > Profile screen to open the following screen. Figure 28 Client Mode: WLAN > Profile > Add The following table describes the labels in this screen. Table 20 Client Mode: WLAN > Profile > Add LABEL DESCRIPTION Wireless Setup Profile Name Enter a descriptive name for this profile. Network Name (SSID) Enter the name of the access point to which you are connecting. Security Security Mode Select the security mode of the access point to which you want to connect. Apply Click Apply to save your changes back to the WAP3205. Cancel Click Canel to go back to the previous screen. 7.5.1.1 No Security Use this screen if the access point to which you want to connect does not use encryption. Figure 29 Client Mode: WLAN > Profile: No Security 58 WAP3205 User’s Guide Chapter 7 Client Mode The following table describes the labels in this screen. Table 21 Client Mode: WLAN > Profile: No Security LABEL DESCRIPTION Wireless Setup Profile Name Enter a descriptive name for this profile. Network Name (SSID) Enter the name of the access point to which you are connecting. Security Security Mode Select No Security in this field. Apply Click Apply to save your changes back to the WAP3205. Cancel Click Canel to go back to the previous screen. 7.5.1.2 Static WEP Use this screen if the access point to which you want to connect to uses WEP security mode. Figure 30 Client Mode: WLAN > Profile: WEP WAP3205 User’s Guide 59 Chapter 7 Client Mode The following table describes the labels in this screen.. Table 22 Client Mode: WLAN > Profile: WEP LABEL DESCRIPTION Wireless Setup Profile Name Enter a descriptive name for this profile. Network Enter the name of the access point to which you are connecting. Name (SSID) Security Security Mode Select Static WEP to enable data encryption. PassPhrase Enter a Passphrase (up to 26 printable characters) and click Generate. A passphrase functions like a password. In WEP security mode, it is further converted by the WAP3205 into a complicated string that is referred to as the “key”. This key is requested from all devices wishing to connect to a wireless network. WEP Encryption Select 64-bit WEP or 128-bit WEP. Authenticatio n Method Select Open or Shared Key from the drop-down list box. This dictates the length of the security key that the network is going to use. This field specifies whether the wireless clients have to provide the WEP key to log into the wireless network. Keep this setting at Open unless you want to force a key verification before communication between the wireless client and the ZyXEL Device occurs. Select Shared Key to force the clients to provide the WEP key prior to communication. ASCII Select this option in order to enter ASCII characters as WEP key. Hex Select this option in order to enter hexadecimal characters as a WEP key. The preceding "0x", that identifies a hexadecimal key, is entered automatically. Key 1 to Key 4 The WEP keys are used to encrypt data. Both the WAP3205 and the wireless stations must use the same WEP key for data transmission. If you chose 64-bit WEP, then enter any 5 ASCII characters or 10 hexadecimal characters ("0-9", "A-F"). If you chose 128-bit WEP, then enter 13 ASCII characters or 26 hexadecimal characters ("0-9", "A-F"). You must configure at least one key, only one key can be activated at any one time. The default key is key 1. 60 Apply Click Apply to save your changes back to the WAP3205. Cancel Click Canel to go back to the previous screen. WAP3205 User’s Guide Chapter 7 Client Mode 7.5.1.3 WPA(2)-PSK Use this screen if the access point to which you want to connect uses WPA(2)-PSK security mode. Figure 31 Client Mode: WLAN > Profile: WPA-PSK/WPA2-PSK The following table describes the labels in this screen. . Table 23 Client Mode: WLAN > Profile: WPA-PSK/WPA2-PSK LABEL DESCRIPTION Wireless Setup Profile Name Enter a descriptive name for this profile. Network Name (SSID) Enter the name of the access point to which you are connecting. Security Security Mode Select WPA-PSK or WPA2-PSK to add strong security on this wireless network. Encryption Type Select the type of wireless encryption employed by the access point to which you want to connect. Pre-Shared Key WPA-PSK or WPA2-PSK uses a simple common password for authentication. Type the pre-shared key employed by the access point to which you want to connect. Apply Click Apply to save your changes back to the WAP3205. Cancel Click Canel to go back to the previous screen. WAP3205 User’s Guide 61 Chapter 7 Client Mode 7.5.2 Site Survey Screen Use this screen to scan for and connect to a wireless network automatically. Go to Configuration > Wireless LAN > Site Survey to open the following screen. Figure 32 Client Mode: WLAN > Site Survey The following table describes the labels in this screen. Table 24 Client Mode: WLAN > Site Survey LABEL DESCRIPTION Station Site Survey # Select a wireless device and click Add Profile to open a configuration screen where you can add the selected wireless device to a profile and then enable it. SSID This displays the SSID of the wireless device. indicates the wireless device is added to an activated profile and the WAP3205 is connecting to it. 62 BSSID This displays the MAC address of the wireless device. Signal Strength This displays the strength of the wireless signal. The signal strength mainly depends on the antenna output power and the distance between your WAP3205 and this device. Channel This displays the channel number used by this wireless device. Encryption This displays the data encryption method used by this wireless device. Authentication This displays the authentication method used by this wireless device. Network Type This displays the network type (Infrastructure or Ad Hoc) of this wireless device. Rescan Click this button to search for available wireless devices within transmission range and update this table. Add Profile Select a wireless device and click this button to add it to a profile. WAP3205 User’s Guide Chapter 7 Client Mode 7.5.3 WPS Screen Use this screen to enable Wi-Fi Protected Setup (WPS) on the WAP3205. Go to Configuration > Wireless LAN > WPS to open the following screen. Figure 33 Client Mode: WLAN > WPS The following table describes the labels in this screen. Table 25 Client Mode: WLAN > WPS LABEL DESCRIPTION Station Site Survey # Use the radio button to select the wireless device to which you want to connect using WPS. SSID This displays the SSID of the wireless device. BSSID This displays the MAC address of the wireless device. Signal Strength This displays the strength of the wireless signal. The signal strength mainly depends on the antenna output power and the distance between your WAP3205 and this device. Ch. This displays the channel number used by this wireless device. Auth. This displays the authentication method used by this wireless device. Encrypt This displays the data encryption method used by this wireless device. Ver. This displays the firmware version running on the wireless device. Status This displays Conf. (configured) when WPS has been set up on the wireless device. This displays Unconf. (unconfigured) if WPS has not been set up on the wireless device. PIN This displays the PIN number of the WAP3205. Renew PIN Click this button to generate a new PIN and display it in the PIN field. PIN Start Click this button to perform wireless security information synchronization using the PIN configuration method. PBC Start Click this button to perform wireless security information synchronization using the Push Button Configuration (PBC) method. WAP3205 User’s Guide 63 Chapter 7 Client Mode Table 25 Client Mode: WLAN > WPS (continued) 64 LABEL DESCRIPTION Stop Click this button to cancel wireless security information synchronization. Rescan Click this button to search for available for WPS-enabled devices within transmission range and update this table. WAP3205 User’s Guide CHAPTER 8 Universal Repeater Mode 8.1 Overview Your WAP3205 can act as an access point and wireless client at the same time. In this mode, the WAP3205 can connect to an existing network through another access point and also lets wireless clients connect to the network through it. This helps you expand wireless coverage when you have an access point or wireless router already in your network. In the example below, the WAP3205 (A) is configured as a universal repeater. It has three clients that want to connect to the Internet. The WAP3205 wirelessly connects to the available access point (B). Figure 34 Universal Repeater Mode B A After the WAP3205 and the access point connect, the WAP3205 acquires its IP address from the access point. The clients of the WAP3205 can now surf the Internet. 8.2 What You Can Do • Use the Status screen (Section 7.4 on page 55) to view read-only information about your WAP3205. • Use the LAN screen (Chapter 11 on page 101) to set the IP address for your WAP3205. • Use the Wireless LAN > Universal Repeater screen (Section 7.5 on page 57) to configure the security between the WAP3205 and another access point. WAP3205 User’s Guide 65 Chapter 8 Universal Repeater Mode • Use other Wireless LAN screens (Chapter 10 on page 83) to configure the wireless settings and wireless security between the wireless clients and the WAP3205. 8.3 What You Need to Know With the exception of the Wireless LAN > Universal Repeater screen, other configuration screens in Universal Repeater mode are similar to the ones in Access Point Mode. See Chapter 11 on page 101 through Chapter 12 on page 107 of this User’s Guide. 8.3.1 Setting your WAP3205 to Universal Repeater Mode 1 Log into the Web Configurator if you haven’t already. See the Quick start Guide for instructions on how to do this. 2 To set your WAP3205 to Universal Repeater Mode, go to Maintenance > Sys OP Mode and select Universal Repeater Mode. Figure 35 Changing to Universal Repeater mode Note: You have to log in to the Web Configurator again when you change modes. As soon as you do, your WAP3205 is already in Universal Repeater mode. 8.3.2 Accessing the Web Configurator in Universal Repeater Mode To login to Web Configurator in Client mode, do the following: 1 66 Connect your computer to the LAN port of the WAP3205. WAP3205 User’s Guide Chapter 8 Universal Repeater Mode 2 The default IP address of the WAP3205 is “192.168.1.2”. If you did not change this, you can use the same IP address in Universal Repeater mode. Open a web browser such as Internet Explorer and type “192.168.1.2” as the web address in your web browser. If you changed the IP address of your WAP3205 while in Access Point mode, use this IP address in Universal Repeater mode. The Universal Repeater mode IP address is always the same as the Access Point mode IP adderss. Note: After clicking Login, the Easy mode appears. Refer to Chapter 5 on page 35 for the Easy mode screens. Click Expert Mode to see the screens described in the sections following this. 8.4 Universal Repeater Mode Status Screen Click to open the status screen. Figure 36 Status: Universal Repeater Mode WAP3205 User’s Guide 67 Chapter 8 Universal Repeater Mode The following table describes the labels shown in the Status screen. Table 26 Status Screen: Universal Repeater Mode LABEL DESCRIPTION Logout Click this at any time to exit the Web Configurator. Device Information Host Name This is the System Name you enter in the Maintenance > General screen. It is for identification purposes. Firmware Version This is the firmware version and the date created. Sys OP Mode This is the device mode (Section 4.1.2 on page 33) to which the WAP3205 is set - Universal Repeater Mode. LAN Information MAC Address This shows the LAN Ethernet adapter MAC Address of your device. IP Address This shows the LAN port’s IP address. IP Subnet Mask This shows the LAN port’s subnet mask. DHCP This shows the LAN port’s DHCP role - Client or None. WLAN Information WLAN OP Mode This is the device mode (Section 4.1.2 on page 33) to which the WAP3205’s wireless LAN is set - Universal Repeater Mode. MAC Address This shows the wireless adapter MAC Address of your device. Status This shows the current status of the Wireless LAN - ON. Name (SSID) This shows a descriptive name used to identify the WAP3205 in the wireless LAN. Channel This shows the channel number which you select manually or the WAP3205 automatically scans and selects. Operating Channel This shows the channel number which the WAP3205 is currently using over the wireless LAN. Security Mode This shows the level of wireless security the WAP3205 is using. 802.11 Mode This shows the wireless standard. WLAN Station Status This shows whether a wireless station is currently associated with the WAP3205. WPS This displays Configured when the WPS has been set up. This displays Unconfigured if the WPS has not been set up. Click the status to display Network > Wireless LAN > WPS screen. Interface Status Interface This displays the WAP3205 port types. The port types are: LAN and WLAN. Status For the LAN and WAN ports, this field displays Down (line is down) or Up (line is up or connected). For the WLAN, it displays Up when the WLAN is enabled or Down when the WLAN is disabled. 68 WAP3205 User’s Guide Chapter 8 Universal Repeater Mode Table 26 Status Screen: Universal Repeater Mode LABEL DESCRIPTION Rate For the LAN ports, this displays the port speed or N/A when the line is disconnected. For the WLAN, it displays the maximum transmission rate when the WLAN is enabled and N/A when the WLAN is disabled. System Status Item This column shows the type of data the WAP3205 is recording. Data This column shows the actual data recorded by the WAP3205. System Up Time This is the total time the WAP3205 has been on. Current Date/Time This field displays your WAP3205’s present date and time. System Resource CPU Usage This displays what percentage of the WAP3205’s processing ability is currently used. When this percentage is close to 100%, the WAP3205 is running at full load, and the throughput is not going to improve anymore. If you want some applications to have more throughput, you should turn off other applications (for example, using bandwidth management. Memory Usage This shows what percentage of the heap memory the WAP3205 is using. System Setting Configuration Mode This shows the web configurator mode you are viewing - Expert. Summary Packet Statistics Click Details... to go to the Monitor > Packet Statistics screen (Section 3.4 on page 30). Use this screen to view port status and packet specific statistics. WLAN Station Status Click Details... to go to the Monitor > WLAN Station Status screen (Section 3.5 on page 32). Use this screen to view the wireless stations that are currently associated to the WAP3205. 8.5 Universal Repeater Screen Use this screen to enter the SSID and select the wireless security mode used by the wireless device to which you want to connect. Go to Configuration > Wireless LAN > Universal Repeater to open the Universal Repeater screen. The screen varies depending on security mode. WAP3205 User’s Guide 69 Chapter 8 Universal Repeater Mode 8.5.1 No Security Figure 37 Universal Repeater Mode: Wireless LAN > Universal Repeater: No Security The following table describes the labels in this screen. Table 27 Universal Repeater Mode: Wireless LAN > Universal Repeater: No Security LABEL DESCRIPTION Universal Repeater Parameters SSID Enter the name of the access point to which you are connecting. MAC Address (Optional) Enter the MAC address of the access point to which you are connecting. Security Mode Select No Security if the access point to which you want to connect does not use encryption. Apply Click Apply to save your changes back to the WAP3205. Reset Click Reset to reload the previous configuration for this screen. 8.5.2 Static WEP Figure 38 Universal Repeater Mode: Wireless LAN > Universal Repeater: Static WEP 70 WAP3205 User’s Guide Chapter 8 Universal Repeater Mode The following table describes the labels in this screen. Table 28 Universal Repeater Mode: Wireless LAN > Universal Repeater: Static WEP LABEL DESCRIPTION Universal Repeater Parameters SSID Enter the name of the access point to which you are connecting. MAC Address (Optional) Enter the MAC address of the access point to which you are connecting. Security Mode Select Static WEP if the access point to which you want to connect uses WEP data encryption. Encryption Type Select Open or Shared Key from the drop-down list box. This field specifies whether the wireless clients have to provide the WEP key to log into the wireless network. Keep this setting at Open unless you want to force a key verification before communication between the wireless client and the ZyXEL Device occurs. Select Shared Key to force the clients to provide the WEP key prior to communication. WEP Key WEP Default Key Select a default WEP key to use for data encryption. WEP Key 1 ~ WEP Key 4 The WEP keys are used to encrypt data. Both the WAP3205 and the access point must use the same WEP key for data transmission. If you chose HEX, enter 10 or 26 hexadecimal characters in the range of "A-F", "a-f" and "0-9" (for example, 11AA22BB33) for a 64-bit or 128-bit WEP key respectively. If you chose ASCII, enter any 5 or 13 ASCII characters (case sensitive) ranging from "a-z", "A-Z" and "0-9" (for example, MyKey) for a 64-bit or 128-bit WEP key respectively. You must configure at least one key, only one key can be activated at any one time. Apply Click Apply to save your changes back to the WAP3205. Reset Click Reset to reload the previous configuration for this screen. WAP3205 User’s Guide 71 Chapter 8 Universal Repeater Mode 8.5.3 WPA(2)-PSK Figure 39 Universal Repeater Mode: Wireless LAN > Universal Repeater: WPA(2)PSK The following table describes the labels in this screen. Table 29 Universal Repeater Mode: Wireless LAN > Universal Repeater: WPA(2)PSK LABEL DESCRIPTION Universal Repeater Parameters SSID Enter the name of the access point to which you are connecting. MAC Address (Optional) Enter the MAC address of the access point to which you are connecting. Security Mode Select WPA-PSK or WPA2-PSK if the access point to which you want to connect uses WPA-PSK or WPA2-PSK. Encryption Type Select the type of wireless encryption employed by the access point to which you want to connect. Pre-Shared Key WPA-PSK or WPA2-PSK uses a simple common password for authentication. Type the password employed by the access point to which you want to connect. 72 Apply Click Apply to save your changes back to the WAP3205. Reset Click Reset to reload the previous configuration for this screen. WAP3205 User’s Guide CHAPTER 9 Tutorials 9.1 Overview This chapter provides tutorials for your WAP3205 (in access point or universal repeater mode) as follows: • Connecting to the Internet from an Access Point • Configuring Wireless Security Using WPS • Enabling and Configuring Wireless Security (No WPS) 9.2 Connecting to the Internet from an Access Point This section gives you an example of how to set up an access point (AP) and wireless client (a notebook (B), in this example) for wireless communication. B can access the Internet through the access point (A) wirelessly. Figure 40 Wireless Access Point Connection to the Internet 9.3 Configuring Wireless Security Using WPS This section gives you an example of how to set up wireless network using WPS. This example uses the WAP3205 as the AP and NWD-211AN as the wireless client which connects to a notebook. WAP3205 User’s Guide 73 Chapter 9 Tutorials Note: The wireless client must be a WPS-aware device (for example, a WPS USB adapter or PCI card). There are two WPS methods for creating a secure connection. This tutorial shows you how to do both. • Push Button Configuration (PBC) - create a secure wireless network simply by pressing a button. See Section 9.3.1 on page 74.This is the easier method. • PIN Configuration - create a secure wireless network simply by entering a wireless client's PIN (Personal Identification Number) in the WAP3205’s interface. See Section 9.3.2 on page 75. This is the more secure method, since one device can authenticate the other. 9.3.1 Push Button Configuration (PBC) 1 Make sure that your WAP3205 is turned on and that it is within range of your computer. 2 Make sure that you have installed the wireless client (this example uses the NWD211AN) driver and utility in your notebook. 3 In the wireless client utility, find the WPS settings. Enable WPS and press the WPS button (Start or WPS button) 4 Log into WAP3205’s Web Configurator and press the Push Button button in the Network > Wireless Client > WPS Station screen. Note: Your WAP3205 has a WPS button located on its panel, as well as a WPS button in its configuration utility. Both buttons have exactly the same function; you can use one or the other. Note: It doesn’t matter which button is pressed first. You must press the second button within two minutes of pressing the first one. The WAP3205 sends the proper configuration settings to the wireless client. This may take up to two minutes. Then the wireless client is able to communicate with the WAP3205 securely. 74 WAP3205 User’s Guide Chapter 9 Tutorials The following figure shows you an example to set up wireless network and security by pressing a button on both WAP3205 and wireless client (the NWD-211AN in this example). Figure 41 Example WPS Process: PBC Method Wireless Client WITHIN 2 MINUTES SECURITY INFO COMMUNICATION 9.3.2 PIN Configuration When you use the PIN configuration method, you need to use both WAP3205’s configuration interface and the client’s utilities. 1 Launch your wireless client’s configuration utility. Go to the WPS settings and select the PIN method to get a PIN number. 2 Enter the PIN number to the PIN field in the Network > Wireless LAN > WPS Station screen on the WAP3205. 3 Click Start buttons (or button next to the PIN field) on both the wireless client utility screen and the WAP3205’s WPS Station screen within two minutes. The WAP3205 authenticates the wireless client and sends the proper configuration settings to the wireless client. This may take up to two minutes. Then the wireless client is able to communicate with the WAP3205 securely. WAP3205 User’s Guide 75 Chapter 9 Tutorials The following figure shows you the example to set up wireless network and security on WAP3205 and wireless client (ex. NWD-211AN in this example) by using PIN method. Figure 42 Example WPS Process: PIN Method Wireless Client WITHIN 2 MINUTES Authentication by PIN SECURITY INFO COMMUNICATION 76 WAP3205 User’s Guide Chapter 9 Tutorials 9.4 Enabling and Configuring Wireless Security (No WPS) This example shows you how to configure wireless security settings with the following parameters on your WAP3205. SSID SSID_Example3 Channel Auto Security WPA-PSK (Pre-Shared Key: ThisismyWPA-PSKpre-sharedkey) Follow the steps below to configure the wireless settings on your WAP3205. The instructions require that your hardware is connected (see the Quick Start Guide) and you are logged into the Web Configurator through your LAN connection (see Section 2.2 on page 23). 1 Open the Wireless LAN > General screen in the AP’s Web Configurator. 2 Enter SSID_Example3 as the SSID and select a channel or select Auto Channel Selection to have the WAP3205 scans for and select an available channel automatically. Click Apply. Figure 43 Tutorial: Network > Wireless LAN > General 3 Click the Security tab. WAP3205 User’s Guide 77 Chapter 9 Tutorials 4 Select the SSID (SSID_Example3) for which you want to configure the security. Set security mode to WPA-PSK and enter ThisismyWPA-PSKpre-sharedkey in the Pre-Shared Key field. Click Apply. Figure 44 Tutorial: Network > Wireless LAN > Security 5 Open the Status screen. Verify your wireless and wireless security settings under Device Information and check if the WLAN connection is up under Interface Status. Figure 45 Tutorial: Checking Wireless Settings 78 WAP3205 User’s Guide Chapter 9 Tutorials 9.4.1 Configure Your Notebook Note: We use the ZyXEL NWD-211AN wireless adapter utility screens as an example for the wireless client. The screens may vary for different models. 1 The WAP3205 supports IEEE 802.11b, IEEE 802.11g and IEEE 802.11n wireless clients. Make sure that your notebook or computer’s wireless adapter supports one of these standards. 2 Wireless adapters come with software sometimes called a “utility” that you install on your computer. See your wireless adapter’s User’s Guide for information on how to do that. 3 After you’ve installed the utility, open it. If you cannot see your utility’s icon on your screen, go to Start > Programs and click on your utility in the list of programs that appears. The utility displays a list of APs within range, as shown in the example screen below. 4 Select SSID_Example3 and click Connect. Figure 46 Connecting a Wireless Client to a Wireless Network t 5 Select WPA-PSK and type the security key in the following screen. Click Next. Figure 47 Security Settings WAP3205 User’s Guide 79 Chapter 9 Tutorials 6 The Confirm Save window appears. Check your settings and click Save to continue. Figure 48 Confirm Save 7 Check the status of your wireless connection in the screen below. If your wireless connection is weak or you have no connection, see the Troubleshooting section of this User’s Guide. Figure 49 Link Status If your connection is successful, open your Internet browser and enter http:// www.zyxel.com or the URL of any other web site in the address bar. If you are able to access the web site, your wireless connection is successfully configured. 80 WAP3205 User’s Guide P ART II Configuration Wireless LAN (83) LAN (101) 81 82 CHAPTER 10 Wireless LAN 10.1 Overview This chapter discusses how to configure the wireless network settings in your WAP3205. See the appendices for more detailed information about wireless networks. The following figure provides an example of a wireless network. Figure 50 Example of a Wireless Network A B The wireless network is the part in the blue circle. In this wireless network, devices A and B are called wireless clients. The wireless clients use the access point (AP) to interact with other devices (such as the printer) or with the Internet. Your WAP3205 is the AP. WAP3205 User’s Guide 83 Chapter 10 Wireless LAN 10.2 What You Can Do • Use the General screen (Section 10.4 on page 87) to enter the SSID, enable intra-BSS traffic and select the channel. • Use the Security screen (Section 10.5 on page 88) to configure wireless security between the WAP3205 and the wireless clients. • Use the MAC Filter screen (Section 10.6 on page 92) to allow or deny wireless stations based on their MAC addresses from connecting to the WAP3205. • Use the Advanced screen (Section 10.7 on page 93) to configure wireless advanced features, such as set the RTS/CTS Threshold and HT physical mode. • Use the QoS screen (Section 10.8 on page 95) to enable Wifi MultiMedia Quality of Service (WMMQoS). This allows the WAP3205 to automatically set priority levels to services, such as e-mail, VoIP, chat, and so on. • Use the WPS screen (Section 10.9 on page 95) to quickly set up a wireless network with strong security, without having to configure security settings manually. • Use the WPS Station screen (Section 10.10 on page 97) to add a wireless station using WPS. • Use the Scheduling screen (Section 10.11 on page 97) to set the times your wireless LAN is turned on and off. • Use the WDS screen (Section 10.12 on page 99) to configure Wireless Distribution System on your WAP3205. 10.3 What You Should Know Every wireless network must follow these basic guidelines. • Every wireless client in the same wireless network must use the same SSID. The SSID is the name of the wireless network. It stands for Service Set IDentity. • If two wireless networks overlap, they should use different channels. Like radio stations or television channels, each wireless network uses a specific channel, or frequency, to send and receive information. • Every wireless client in the same wireless network must use security compatible with the AP. Security stops unauthorized devices from using the wireless network. It can also protect the information that is sent in the wireless network. 10.3.1 Wireless Security Overview The following sections introduce different types of wireless security you can set up in the wireless network. 84 WAP3205 User’s Guide Chapter 10 Wireless LAN 10.3.1.1 SSID Normally, the AP acts like a beacon and regularly broadcasts the SSID in the area. You can hide the SSID instead, in which case the AP does not broadcast the SSID. In addition, you should change the default SSID to something that is difficult to guess. This type of security is fairly weak, however, because there are ways for unauthorized devices to get the SSID. In addition, unauthorized devices can still see the information that is sent in the wireless network. 10.3.1.2 MAC Address Filter Every wireless client has a unique identification number, called a MAC address.1 A MAC address is usually written using twelve hexadecimal characters2; for example, 00A0C5000002 or 00:A0:C5:00:00:02. To get the MAC address for each wireless client, see the appropriate User’s Guide or other documentation. You can use the MAC address filter to tell the AP which wireless clients are allowed or not allowed to use the wireless network. If a wireless client is allowed to use the wireless network, it still has to have the correct settings (SSID, channel, and security). If a wireless client is not allowed to use the wireless network, it does not matter if it has the correct settings. This type of security does not protect the information that is sent in the wireless network. Furthermore, there are ways for unauthorized devices to get the MAC address of an authorized wireless client. Then, they can use that MAC address to use the wireless network. 10.3.1.3 Encryption Wireless networks can use encryption to protect the information that is sent in the wireless network. Encryption is like a secret code. If you do not know the secret code, you cannot understand the message. 1. Some wireless devices, such as scanners, can detect wireless networks but cannot use wireless networks. These kinds of wireless devices might not have MAC addresses. 2. Hexadecimal characters are 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, and F. WAP3205 User’s Guide 85 Chapter 10 Wireless LAN The types of encryption you can choose depend on the type of user authentication. Table 30 Types of Encryption for Each Type of Authentication NO AUTHENTICATION Weakest No Security WEP WPA-PSK Strongest WPA2-PSK Usually, you should set up the strongest encryption that every wireless client in the wireless network supports. Suppose the wireless network has two wireless clients. Device A only supports WEP, and device B supports WEP and WPA-PSK. Therefore, you should set up WEP in the wireless network. Note: It is recommended that wireless networks use WPA-PSK or stronger encryption. IEEE 802.1x and WEP encryption are better than none at all, but it is still possible for unauthorized devices to figure out the original information pretty quickly. When you select WPA2-PSK in your WAP3205, you can also select an option (WPA Compatible) to support WPA as well. In this case, if some wireless clients support WPA and some support WPA2, you should set up WPA2-PSK (depending on the type of wireless network login) and select the WPA Compatible option in the WAP3205. Many types of encryption use a key to protect the information in the wireless network. The longer the key, the stronger the encryption. Every wireless client in the wireless network must have the same key. 10.3.1.4 WPS WiFi Protected Setup (WPS) is an industry standard specification, defined by the WiFi Alliance. WPS allows you to quickly set up a wireless network with strong security, without having to configure security settings manually. Depending on the devices in your network, you can either press a button (on the device itself, or in its configuration utility) or enter a PIN (Personal Identification Number) in the devices. Then, they connect and set up a secure network by themselves. See how to set up a secure wireless network using WPS in the Section 9.3 on page 73. 10.3.1.5 WDS Wireless Distribution System or WDS security is used between bridged APs. It is independent of the security between the wired networks and their respective APs. If you do not enable WDS security, traffic between APs is not encrypted. When WDS security is enabled, both APs must use the same pre-shared key. 86 WAP3205 User’s Guide Chapter 10 Wireless LAN 10.4 General Wireless LAN Screen Use this screen to enter the SSID, select the channel and enable intra-BSS traffic. Note: If you are configuring the WAP3205 from a computer connected to the wireless LAN and you change the WAP3205’s SSID, channel or security settings, you will lose your wireless connection when you press Apply to confirm. You must then change the wireless settings of your computer to match the WAP3205’s new settings. Click Network > Wireless LAN to open the General screen. Figure 51 Network > Wireless LAN > General The following table describes the general wireless LAN labels in this screen. Table 31 Network > Wireless LAN > General LABEL DESCRIPTION Wireless Setup Wireless LAN This is turned on by default. The current wireless state is reflected in this field. Network Name(SSID) or The SSID (Service Set IDentity) identifies the Service Set with which a wireless client is associated. Enter a descriptive name (up to 32 printable characters found on a typical English language keyboard) for the wireless LAN. Name(SSID1 ~3) You can configure up to four SSIDs to enable multiple BSSs (Basic Service Sets) on the WAP3205. This allows you to use one access point to provide several BSSs simutaneously. You can then assign varying security types to different SSIDs. Wireless clients can use different SSIDs to associate with the same access point. Hide SSID Select this check box to hide the SSID in the outgoing beacon frame so a wireless client cannot obtain the SSID through scanning using a site survey tool. WAP3205 User’s Guide 87 Chapter 10 Wireless LAN Table 31 Network > Wireless LAN > General LABEL Enable Intra-BSS Traffic DESCRIPTION A Basic Service Set (BSS) exists when all communications between wireless clients or between a wireless client and a wired network client go through one access point (AP). Intra-BSS traffic is traffic between wireless clients in the BSS. When IntraBSS is enabled, wireless clients can access the wired network and communicate with each other. When Intra-BSS is disabled, wireless clients can still access the wired network but cannot communicate with each other. Channel Selection Set the operating frequency/channel depending on your particular region. Select a channel from the drop-down list box. The options vary depending on the frequency band and the country you are in. This option is only available if Auto Channel Selection is disabled. Auto Channel Selection Select the check box to have the WAP3205 automatically scan for and select a channel which is not used by another device. Operating Channel This displays the channel the WAP3205 is currently using. Apply Click Apply to save your changes back to the WAP3205. Reset Click Reset to reload the previous configuration for this screen. 10.5 Wireless Security Screen Use this screen to select the wireless security mode for each SSID. Click Network > Wireless LAN > Security to open the Security screen. The screen varies depending on what you select in the Security Mode field. 10.5.1 No Security Select No Security to allow wireless clients to communicate with the access points without any data encryption. 88 WAP3205 User’s Guide Chapter 10 Wireless LAN Note: If you do not enable any wireless security on your WAP3205, your network is accessible to any wireless networking device that is within range. Figure 52 Network > Wireless LAN > Security: No Security The following table describes the labels in this screen. Table 32 Network > Wireless LAN > Security: No Security LABEL DESCRIPTION SSID Select the SSID for which you want to configure the security. Security Mode Choose No Security from the drop-down list box. Apply Click Apply to save your changes back to the WAP3205. Cancel Click Cancel to reload the previous configuration for this screen. 10.5.2 WEP Encryption WEP encryption scrambles the data transmitted between the wireless stations and the access points to keep network communications private. It encrypts unicast and multicast communications in a network. Both the wireless stations and the access points must use the same WEP key. Your WAP3205 allows you to configure up to four 64-bit or 128-bit WEP keys but only one key can be enabled at any one time. WAP3205 User’s Guide 89 Chapter 10 Wireless LAN Select Static WEP from the Security Mode list. Figure 53 Network > Wireless LAN > Security: Static WEP The following table describes the wireless LAN security labels in this screen. Table 33 Network > Wireless LAN > Security: Static WEP LABEL DESCRIPTION SSID Select the SSID for which you want to configure the security. Security Mode Select Static WEP to enable data encryption. PassPhrase Enter a Passphrase (up to 26 printable characters) and click Generate. A passphrase functions like a password. In WEP security mode, it is further converted by the WAP3205 into a complicated string that is referred to as the “key”. This key is requested from all devices wishing to connect to a wireless network. WEP Encryption Authenticatio n Method Select 64-bits or 128-bits. This dictates the length of the security key that the network is going to use. Select Auto or Shared Key from the drop-down list box. This field specifies whether the wireless clients have to provide the WEP key to login to the wireless client. Keep this setting at Auto unless you want to force a key verification before communication between the wireless client and the WAP3205 occurs. Select Shared Key to force the clients to provide the WEP key prior to communication. ASCII 90 Select this option in order to enter ASCII characters as WEP key. WAP3205 User’s Guide Chapter 10 Wireless LAN Table 33 Network > Wireless LAN > Security: Static WEP LABEL DESCRIPTION Hex Select this option in order to enter hexadecimal characters as a WEP key. The preceding "0x", that identifies a hexadecimal key, is entered automatically. Key 1 to Key 4 The WEP keys are used to encrypt data. Both the WAP3205 and the wireless stations must use the same WEP key for data transmission. If you chose 64-bit WEP, then enter any 5 ASCII characters or 10 hexadecimal characters ("0-9", "A-F"). If you chose 128-bit WEP, then enter 13 ASCII characters or 26 hexadecimal characters ("0-9", "A-F"). You must configure at least one key, only one key can be activated at any one time. The default key is key 1. Apply Click Apply to save your changes back to the WAP3205. Cancel Click Cancel to reload the previous configuration for this screen. 10.5.3 WPA-PSK/WPA2-PSK Select WPA-PSK or WPA2-PSK from the Security Mode list. Figure 54 Network > Wireless LAN > Security: WPA-PSK/WPA2-PSK The following table describes the labels in this screen. Table 34 Network > Wireless LAN > Security: WPA-PSK/WPA2-PSK LABEL DESCRIPTION SSID Select the SSID for which you want to configure the security. Security Mode Select WPA-PSK or WPA2-PSK to enable data encryption. WPA Compatible This field appears when you choose WPA2-PSK as the Security Mode. WAP3205 User’s Guide Check this field to allow wireless devices using WPA-PSK security mode to connect to your WAP3205. 91 Chapter 10 Wireless LAN Table 34 Network > Wireless LAN > Security: WPA-PSK/WPA2-PSK LABEL DESCRIPTION Pre-Shared Key WPA-PSK/WPA2-PSK uses a simple common password for authentication. Type a pre-shared key from 8 to 63 case-sensitive keyboard characters. Group Key Update Timer The Group Key Update Timer is the rate at which the AP sends a new group key out to all clients. The default is 3600 seconds (60 minutes). Apply Click Apply to save your changes back to the WAP3205. Cancel Click Cancel to reload the previous configuration for this screen. 10.6 MAC Filter The MAC filter screen allows you to configure the WAP3205 to give exclusive access to devices (Allow) or exclude devices from accessing the WAP3205 (Deny). Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address is assigned at the factory and consists of six pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02. You need to know the MAC address of the devices to configure this screen. To change your WAP3205’s MAC filter settings, click Network > Wireless LAN > MAC Filter. The screen appears as shown. Figure 55 Network > Wireless LAN > MAC Filter The following table describes the labels in this menu. Table 35 Network > Wireless LAN > MAC Filter LABEL DESCRIPTION Access Policy SSID 92 Select the SSID for which you want to configure MAC filtering. WAP3205 User’s Guide Chapter 10 Wireless LAN Table 35 Network > Wireless LAN > MAC Filter LABEL DESCRIPTION Policy Define the filter action for the list of MAC addresses in the MAC Address table. Select Disable to deactivate the MAC filtering rule you configure below. Select Allow to permit access to the WAP3205, MAC addresses not listed will be denied access to the WAP3205. Select Reject to block access to the WAP3205, MAC addresses not listed will be allowed to access the WAP3205 Add a station Mac Address Enter the MAC addresses of the wireless station that are allowed or denied access to the WAP3205 in these address fields. Enter the MAC addresses in a valid MAC address format, that is, six hexadecimal character pairs, for example, 12:34:56:78:9a:bc. Click Add. MAC Filter Summary Delete Click the delete icon to remove the MAC address from the list. MAC Address This is the MAC address of the wireless station that are allowed or denied access to the WAP3205. Apply Click Apply to save your changes back to the WAP3205. Cancel Click Cancel to reload the previous configuration for this screen. 10.7 Wireless LAN Advanced Screen Use this screen to allow wireless advanced features, such as the output power, RTS/CTS Threshold and high-throughput physical mode settings. Click Network > Wireless LAN > Advanced. The screen appears as shown. Figure 56 Network > Wireless LAN > Advanced WAP3205 User’s Guide 93 Chapter 10 Wireless LAN The following table describes the labels in this screen. Table 36 Network > Wireless LAN > Advanced LABEL DESCRIPTION RTS/CTS Threshold Data with its frame size larger than this value will perform the RTS (Request To Send)/CTS (Clear To Send) handshake. Enter a value between 256 and 2432. Fragmentatio n Threshold The threshold (number of bytes) for the fragmentation boundary for directed messages. It is the maximum data fragment size that can be sent. Enter an even number between 256 and 2346. Output Power Set the output power of the WAP3205 in this field. If there is a high density of APs in an area, decrease the output power of the WAP3205 to reduce interference with other APs. Select one of the following 100%, 90%, 75%, 50%, 25% or 10%. See the product specifications for more information on your WAP3205’s output power. Network Mode Select 11b only to allow only IEEE 802.11b compliant WLAN devices to associate with the WAP3205. Select 11g only to allow only IEEE 802.11g compliant WLAN devices to associate with the WAP3205. Select 11 b/g mixed mode to allow both IEEE802.11b and IEEE802.11g compliant WLAN devices to associate with the WAP3205. The transmission rate of your WAP3205 might be reduced. Select 11 b/g/n mixed mode to allow both IEEE802.11b, IEEE802.11g and IEEE802.11n compliant WLAN devices to associate with the WAP3205. The transmission rate of your WAP3205 might be reduced. HT (High Throughput) Physical Mode - Use the fields below to configure the 802.11 wireless environment of your WAP3205. Operating Mode Choose this according to the wireless mode(s) used in your network. Mixed - Select this if the wireless clients in your network use different wireless modes (for example, IEEE 802.11b/g and IEEE 802.1n modes) Green - Select this if the wireless clients in your network uses only one type of wireless mode (for example, IEEEE 802.11 n only) Channel Bandwidth Select the channel bandwidth you want to use for your wireless network. It is recommended that you select 20/40 (20/40 MHz). Select 20 MHz if you want to lessen radio interference with other wireless devices in your neighborhood. Guard Interval Select Auto to increase data throughput. However, this may make data transfer more prone to errors. Select Long to prioritize data integrity. This may be because your wireless network is busy and congested or the WAP3205 is located in an environment prone to radio interference. Extension Channel 94 This is set to Auto by default. If you select 20/40 as your Channel Bandwidth, the extension channel enables the WAP3205 to get higher data throughput. This also lowers radio interference and traffic. WAP3205 User’s Guide Chapter 10 Wireless LAN Table 36 Network > Wireless LAN > Advanced LABEL DESCRIPTION Apply Click Apply to save your changes back to the WAP3205. Cancel Click Cancel to reload the previous configuration for this screen. 10.8 Quality of Service (QoS) Screen The QoS screen allows you to automatically give a service (such as VoIP and video) a priority level. Click Network > Wireless LAN > QoS. The following screen appears. Figure 57 Network > Wireless LAN > QoS The following table describes the labels in this screen. Table 37 Network > Wireless LAN > QoS LABEL DESCRIPTION Enable WMM QoS Check this to have the WAP3205 automatically give a service a priority level according to the ToS value in the IP header of packets it sends. WMM QoS (Wifi MultiMedia Quality of Service) gives high priority to voice and video, which makes them run more smoothly. Apply Click Apply to save your changes to the WAP3205. Cancel Click Cancel to reload the previous configuration for this screen. 10.9 WPS Screen Use this screen to enable/disable WPS, view or generate a new PIN number and check current WPS status. To open this screen, click Network > Wireless LAN > WPS tab. WAP3205 User’s Guide 95 Chapter 10 Wireless LAN Note: With WPS, wireless clients can only connect to the wireless network using the first SSID on the WAP3205. Figure 58 Network > Wireless LAN > WPS The following table describes the labels in this screen. Table 38 Network > Wireless LAN > WPS LABEL DESCRIPTION WPS Setup Enable WPS Select this to enable the WPS feature. PIN Number This displays a PIN number last time system generated. Click Generate to generate a new PIN number. Status Status This displays Configured when the WAP3205 has connected to a wireless network using WPS or when Enable WPS is selected and wireless or wireless security settings have been changed. The current wireless and wireless security settings also appear in the screen. This displays Unconfigured if WPS is disabled and there are no wireless or wireless security changes on the WAP3205 or you click Release_Configuration to remove the configured wireless and wireless security settings. 96 Release Configuration This button is only available when the WPS status displays Configured. 802.11 Mode This is the 802.11 mode used. Only compliant WLAN devices can associate with the WAP3205. SSID This is the name of the wireless network (the WAP3205’s first SSID). Security This is the type of wireless security employed by the network. Apply Click Apply to save your changes back to the WAP3205. Cancel Click Cancel to reload the previous configuration for this screen. Click this button to remove all configured wireless and wireless security settings for WPS connections on the WAP3205. WAP3205 User’s Guide Chapter 10 Wireless LAN 10.10 WPS Station Screen Use this screen when you want to add a wireless station using WPS. To open this screen, click Network > Wireless LAN > WPS Station tab. Note: After you click Push Button on this screen, you have to press a similar button in the wireless station utility within 2 minutes. To add the second wireless station, you have to press these buttons on both device and the wireless station again after the first 2 minutes. Figure 59 Network > Wireless LAN > WPS Station The following table describes the labels in this screen. Table 39 Network > Wireless LAN > WPS Station LABEL DESCRIPTION Push Button Use this button when you use the PBC (Push Button Configuration) method to configure wireless stations’s wireless settings. See Section 9.3.1 on page 74. Click this to start WPS-aware wireless station scanning and the wireless security information synchronization. Or input station’s PIN number Use this button when you use the PIN Configuration method to configure wireless station’s wireless settings. See Section 9.3.2 on page 75. Type the same PIN number generated in the wireless station’s utility. Then click Start to associate to each other and perform the wireless security information synchronization. 10.11 Scheduling Screen Use this screen to set the times your wireless LAN is turned on and off. Wireless LAN scheduling is disabled by default. The wireless LAN can be scheduled to turn WAP3205 User’s Guide 97 Chapter 10 Wireless LAN on or off on certain days and at certain times. To open this screen, click Network > Wireless LAN > Scheduling tab. Figure 60 Network > Wireless LAN > Scheduling The following table describes the labels in this screen. Table 40 Network > Wireless LAN > Scheduling LABEL DESCRIPTION Wireless LAN Scheduling Enable Wireless LAN Scheduling Select this to enable Wireless LAN scheduling. Scheduling 98 WLAN Status Select On or Off to specify whether the Wireless LAN is turned on or off. This field works in conjunction with the Day and For the following times fields. Day Select Everyday or the specific days to turn the Wireless LAN on or off. If you select Everyday you can not select any specific days. This field works in conjunction with the For the following times field. For the following times (24-Hour Format) Select a begin time using the first set of hour and minute (min) drop down boxes and select an end time using the second set of hour and minute (min) drop down boxes. If you have chosen On earlier for the WLAN Status the Wireless LAN will turn on between the two times you enter in these fields. If you have chosen Off earlier for the WLAN Status the Wireless LAN will turn off between the two times you enter in these fields. Apply Click Apply to save your changes back to the WAP3205. Cancel Click Cancel to reload the previous configuration for this screen. WAP3205 User’s Guide Chapter 10 Wireless LAN 10.12 WDS Screen A Wireless Distribution System (WDS) is a wireless connection between two or more APs. Use this screen to set the operating mode of your WAP3205 to AP + Bridge or Bridge and establish wireless links with other APs. You need to know the MAC address of the peer device, which also must be in bridge mode. Note: You must enable the same wireless security settings on the WAP3205 and on all wireless clients that you want to associate with it. Click Network > Wireless LAN > WDS tab. The following screen opens with the Basic Setting set to Disabled, and Security Mode set to No Security. Figure 61 Network > Wireless LAN > WDS The following table describes the labels in this screen. Table 41 Network > Wireless LAN > WDS LABEL DESCRIPTION WDS Setup Basic Settings Select the operating mode for your WAP3205. • • • Disable - The WAP3205 works as an access point only and cannot establish wireless links with other APs. AP + Bridge - The WAP3205 functions as a bridge and access point simultaneously. Bridge - The WAP3205 acts as a wireless network bridge and establishes wireless links with other APs. You need to know the MAC address of the peer device, which also must be in bridge mode. The WAP3205 can establish up to five wireless links with other APs. Local MAC Address WAP3205 User’s Guide This is the MAC address of your WAP3205. 99 Chapter 10 Wireless LAN Table 41 Network > Wireless LAN > WDS LABEL DESCRIPTION Phy Mode Select the Phy mode you want the WAP3205 to use. This dictates the maximum size of packets during data transmission. This field is not available when you select Disable in the Basic Setting field. Remote MAC Address This is the MAC address of the peer device that your WAP3205 wants to make a bridge connection with. You can connect to up to 4 peer devices. Security EncrypType Select whether to use WEP, TKIP or AES encryption for your WDS connection in this field. Otherwise, select No Security. 100 EncrypKey The Encryp key is used to encrypt data. Peers must use the same key for data transmission. Apply Click Apply to save your changes to WAP3205. Cancel Click Cancel to reload the previous configuration for this screen. WAP3205 User’s Guide CHAPTER 11 LAN 11.1 Overview This chapter describes how to configure LAN settings. A Local Area Network (LAN) is a shared communication system to which many computers are attached. A LAN is a computer network limited to the immediate area, usually the same building or floor of a building. The LAN screens can help you configure a LAN DHCP server, manage IP addresses, and partition your physical network into logical networks. Figure 62 LAN Example The LAN screens can help you manage IP addresses. 11.2 What You Can Do • Use the IP screen (Section 11.4 on page 103) to change the IP address for your WAP3205 and DNS server information. • Use the IP Alias screen (Section 11.5 on page 104) to have the WAP3205 apply IP alias to create LAN subnets. WAP3205 User’s Guide 101 Chapter 11 LAN 11.3 What You Need To Know There are two separate IP networks, one inside the LAN network and the other outside the WAN network as shown next. Figure 63 LAN and WAN IP Addresses The LAN parameters of the WAP3205 are preset in the factory with the following values: • IP address of 192.168.1.2 with subnet mask of 255.255.255.0 (24 bits) 11.3.1 LAN TCP/IP The WAP3205 has built-in DHCP server capability that assigns IP addresses and DNS servers to systems that support DHCP client capability. 11.3.2 IP Alias IP alias allows you to partition a physical network into different logical networks over the same Ethernet interface. The WAP3205 supports three logical LAN interfaces via its single physical Ethernet interface with the WAP3205 itself as the gateway for each LAN network. 102 WAP3205 User’s Guide Chapter 11 LAN 11.4 LAN IP Screen Use this screen to change the IP address for your WAP3205. Click Network > LAN > IP. Figure 64 Network > LAN > IP The following table describes the labels in this screen. Table 42 Network > LAN > IP LABEL DESCRIPTION Get from DHCP Server Click this to deploy the WAP3205 as an access point in the network. When you enable this, the WAP3205 gets its IP address from the network’s DHCP server (for example, your ISP or router). Users connected to the WAP3205 can now access the network (i.e., the Internet if the IP address is given by the ISP or a router with Internet access). The Web Configurator may no longer be accessible unless you know the IP address assigned by the DHCP server to the WAP3205. Otherwise, you need to reset the WAP3205 to be able to access the Web Configurator again (see Section 12.7 on page 113 for details on how to reset the WAP3205). Also when you select this, you cannot enter an IP address for your WAP3205 in the field below. Use Defined LAN IP Address Click this if you want to specify the IP address of your WAP3205. Or if your ISP or network administrator gave you a static IP address to access the network or the Internet. IP Address Type the IP address in dotted decimal notation. The default setting is 192.168.1.2. If you change the IP address you will have to log in again with the new IP address. IP Subnet Mask The subnet mask specifies the network number portion of an IP address. Your WAP3205 will automatically calculate the subnet mask based on the IP address that you assign. Unless you are implementing subnetting, use the subnet mask computed by the WAP3205. WAP3205 User’s Guide 103 Chapter 11 LAN Table 42 Network > LAN > IP LABEL DESCRIPTION Gateway IP Address Enter a gateway IP address (if your ISP or network administrator gave you one) in this field. DNS Assignment First DNS Server Second DNS Server Select From ISP if your ISP or router to which the WAP3205 connects dynamically assigns DNS server information (and the WAP3205's WAN IP address). The field to the right displays the (read-only) DNS server IP address that the ISP assigns. Select User-Defined if you have the IP address of a DNS server. Enter the DNS server's IP address in the field to the right. Select None if you do not want to configure DNS servers. If you do not configure a DNS server, you must know the IP address of a computer in order to access it. Apply Click Apply to save your changes back to the WAP3205. Reset Click Reset to begin configuring this screen afresh. 11.5 IP Alias Screen Use this screen to have the WAP3205 apply IP alias to create LAN subnets. Click LAN > IP Alias. Figure 65 Network > LAN > IP Alias The following table describes the labels in this screen. Table 43 Network > LAN > IP Alias 104 LABEL DESCRIPTION IP Alias Check this to enable IP alias. IP Address Type the IP alias address of your WAP3205 in dotted decimal notation. IP Subnet Mask The subnet mask specifies the network number portion of an IP address. Your WAP3205 will automatically calculate the subnet mask based on the IP address that you assign. Unless you are implementing subnetting, use the subnet mask computed by the WAP3205. Apply Click Apply to save your changes back to the WAP3205. Reset Click Reset to begin configuring this screen afresh. WAP3205 User’s Guide P ART III Maintenance and Troubleshooting Maintenance (107) Troubleshooting (119) 105 106 CHAPTER 12 Maintenance 12.1 Overview This chapter provides information on the Maintenance screens. 12.2 What You Can Do • Use the General screen (Section 12.3 on page 108) to set the timeout period of the management session. • Use the Password screen (Section 12.4 on page 108) to change your WAP3205’s system password. • Use the Time screen (Section 12.5 on page 109) to change your WAP3205’s time and date. • Use the Firmware Upgrade screen (Section 12.6 on page 111) to upload firmware to your WAP3205. • Use the Backup/Restore screen (Section 12.8 on page 114) to view information related to factory defaults, backup configuration, and restoring configuration. • Use the Reset/Restart screen (Section 12.8 on page 114) to reboot the WAP3205 without turning the power off. • Use the Sys OP Mode screen (Section 12.10 on page 116) to select how you want to use your WAP3205. WAP3205 User’s Guide 107 Chapter 12 Maintenance 12.3 General Screen Use this screen to set the management session timeout period. Click Maintenance > General. The following screen displays. Figure 66 Maintenance > General The following table describes the labels in this screen. Table 44 Maintenance > General LABEL DESCRIPTION Administrator Inactivity Timer Type how many minutes a management session can be left idle before the session times out. The default is 5 minutes. After it times out you have to log in with your password again. Very long idle timeouts may have security risks. A value of "0" means a management session never times out, no matter how long it has been left idle (not recommended). Apply Click Apply to save your changes back to the WAP3205. Reset Click Reset to begin configuring this screen afresh. 12.4 Password Screen It is strongly recommended that you change your WAP3205's password. If you forget your WAP3205's password (or IP address), you will need to reset the device. See Section 12.8 on page 114 for details Click Maintenance > Password. Figure 67 Maintenance > Password 108 WAP3205 User’s Guide Chapter 12 Maintenance The following table describes the labels in this screen. Table 45 Maintenance > Password LABEL DESCRIPTION Password Setup Change your WAP3205’s password (recommended) using the fields as shown. Old Password Type the default password or the existing password you use to access the system in this field. New Password Type your new system password (up to 30 characters). Note that as you type a password, the screen displays an asterisk (*) for each character you type. Retype to Confirm Type the new password again in this field. Apply Click Apply to save your changes back to the WAP3205. Reset Click Reset to begin configuring this screen afresh. 12.5 Time Setting Screen Use this screen to configure the WAP3205’s time based on your local time zone. To change your WAP3205’s time and date, click Maintenance > Time. The screen appears as shown. Figure 68 Maintenance > Time WAP3205 User’s Guide 109 Chapter 12 Maintenance he following table describes the labels in this screen. Table 46 Maintenance > Time LABEL DESCRIPTION Current Time and Date Current Time This field displays the time of your WAP3205. Each time you reload this page, the WAP3205 synchronizes the time with the time server. Current Date This field displays the date of your WAP3205. Each time you reload this page, the WAP3205 synchronizes the date with the time server. Current Time and Date Manual Select this radio button to enter the time and date manually. If you configure a new time and date, Time Zone and Daylight Saving at the same time, the new time and date you entered has priority and the Time Zone and Daylight Saving settings do not affect it. New Time This field displays the last updated time from the time server or the last time configured manually. (hh:mm:ss) When you select Manual, enter the new time in this field and then click Apply. New Date (yyyy/mm/dd) This field displays the last updated date from the time server or the last date configured manually. When you select Manual, enter the new date in this field and then click Apply. Get from Time Server Select this radio button to have the WAP3205 get the time and date from the time server you specified below. Auto Select Auto to have the WAP3205 automatically search for an available time server and synchronize the date and time with the time server after you click Apply. User Defined Time Server Address Select User Defined Time Server Address and enter the IP address or URL (up to 20 extended ASCII characters in length) of your time server. Check with your ISP/network administrator if you are unsure of this information. Time Zone Setup Time Zone Choose the time zone of your location. This will set the time difference between your time zone and Greenwich Mean Time (GMT). Daylight Savings Daylight saving is a period from late spring to early fall when many countries set their clocks ahead of normal local time by one hour to give more daytime light in the evening. Select this option if you use Daylight Saving Time. 110 WAP3205 User’s Guide Chapter 12 Maintenance Table 46 Maintenance > Time LABEL DESCRIPTION Start Date Configure the day and time when Daylight Saving Time starts if you selected Daylight Savings. The o'clock field uses the 24 hour format. Here are a couple of examples: Daylight Saving Time starts in most parts of the United States on the first Sunday of April. Each time zone in the United States starts using Daylight Saving Time at 2 A.M. local time. So in the United States you would select First, Sunday, April and type 2 in the o'clock field. Daylight Saving Time starts in the European Union on the last Sunday of March. All of the time zones in the European Union start using Daylight Saving Time at the same moment (1 A.M. GMT or UTC). So in the European Union you would select Last, Sunday, March. The time you type in the o'clock field depends on your time zone. In Germany for instance, you would type 2 because Germany's time zone is one hour ahead of GMT or UTC (GMT+1). End Date Configure the day and time when Daylight Saving Time ends if you selected Daylight Savings. The o'clock field uses the 24 hour format. Here are a couple of examples: Daylight Saving Time ends in the United States on the last Sunday of October. Each time zone in the United States stops using Daylight Saving Time at 2 A.M. local time. So in the United States you would select Last, Sunday, October and type 2 in the o'clock field. Daylight Saving Time ends in the European Union on the last Sunday of October. All of the time zones in the European Union stop using Daylight Saving Time at the same moment (1 A.M. GMT or UTC). So in the European Union you would select Last, Sunday, October. The time you type in the o'clock field depends on your time zone. In Germany for instance, you would type 2 because Germany's time zone is one hour ahead of GMT or UTC (GMT+1). Apply Click Apply to save your changes back to the WAP3205. Reset Click Reset to begin configuring this screen afresh. 12.6 Firmware Upgrade Screen Find firmware at www.zyxel.com in a file that (usually) uses the system model name with a “*.bin” extension, e.g., “WAP3205.bin”. The upload process uses HTTP (Hypertext Transfer Protocol) and may take up to two minutes. After a successful upload, the system will reboot. WAP3205 User’s Guide 111 Chapter 12 Maintenance Click Maintenance > Firmware Upgrade. Follow the instructions in this screen to upload firmware to your WAP3205. Figure 69 Maintenance > Firmware Upgrade The following table describes the labels in this screen. Table 47 Maintenance > Firmware Upgrade LABEL DESCRIPTION File Path Type in the location of the file you want to upload in this field or click Browse... to find it. Browse... Click Browse... to find the .bin file you want to upload. Remember that you must decompress compressed (.zip) files before you can upload them. Upload Click Upload to begin the upload process. This process may take up to two minutes. Note: Do not turn off the WAP3205 while firmware upload is in progress! After you see the Firmware Upload In Process screen, wait two minutes before logging into the WAP3205 again. The WAP3205 automatically restarts in this time causing a temporary network disconnect. In some operating systems, you may see the following icon on your desktop. Figure 70 Network Temporarily Disconnected After two minutes, log in again and check your new firmware version in the Status screen. If the upload was not successful, an error message appears. Click Return to go back to the Firmware Upgrade screen. 112 WAP3205 User’s Guide Chapter 12 Maintenance 12.7 Configuration Backup/Restore Screen Backup configuration allows you to back up (save) the WAP3205’s current configuration to a file on your computer. Once your WAP3205 is configured and functioning properly, it is highly recommended that you back up your configuration file before making configuration changes. The backup configuration file will be useful in case you need to return to your previous settings. Restore configuration allows you to upload a new or previously saved configuration file from your computer to your WAP3205. Click Maintenance > Backup/Restore. Information related to factory defaults, backup configuration, and restoring configuration appears as shown next. Figure 71 Maintenance > Backup/Restore The following table describes the labels in this screen. Table 48 Maintenance > Backup/Restore LABEL DESCRIPTION Backup Click Backup to save the WAP3205’s current configuration to your computer. File Path Type in the location of the file you want to upload in this field or click Browse... to find it. Browse... Click Browse... to find the file you want to upload. Remember that you must decompress compressed (.ZIP) files before you can upload them. WAP3205 User’s Guide 113 Chapter 12 Maintenance Table 48 Maintenance > Backup/Restore LABEL DESCRIPTION Upload Click Upload to begin the upload process. Note: Do not turn off the WAP3205 while configuration file upload is in progress. After you see a “configuration upload successful” screen, you must then wait one minute before logging into the WAP3205 again. The WAP3205 automatically restarts in this time causing a temporary network disconnect. If you see an error screen, click Back to return to the Backup/Restore screen. Reset Pressing the Reset button in this section clears all user-entered configuration information and returns the WAP3205 to its factory defaults. You can also press the RESET button on the rear panel to reset the factory defaults of your WAP3205. Refer to the chapter about introducing the Web Configurator for more information on the RESET button. Note: If you uploaded the default configuration file you may need to change the IP address of your computer to be in the same subnet as that of the default WAP3205 IP address (192.168.1.2). See Appendix C on page 149 for details on how to set up your computer’s IP address. 12.8 Reset/Restart Screen System restart allows you to reboot the WAP3205 without turning the power off. Click Maintenance > Reset/Restart to open the following screen. Figure 72 Maintenance > Reset/Restart Click Restart to have the WAP3205 reboot. This does not affect the WAP3205's configuration. 114 WAP3205 User’s Guide Chapter 12 Maintenance 12.9 System Operation Mode Overview The Sys OP Mode (System Operation Mode) function lets you configure your WAP3205 as an access point, wireless client or both at the same time. You can choose between Access Point Mode, Client Mode and Universal Repeater Mode depending on your network topology and the features you require from your device. The following describes the device modes available in your WAP3205. Access Point An access point enabled all ethernet ports to be bridged together and be in the same subnet. To connect to the Internet, another device, such as a router, is required. Figure 73 Access Point Mode Client WAP3205 in client mode connects to an existing access point wirelessly. It acts just like a wireless client in notebooks/computers. Figure 74 Client Mode Wireless Client WAP3205 User’s Guide Access Point 115 Chapter 12 Maintenance Universal Repeater WAP3205 in Universal Repeater mode work as an access point and wireless client simutaneously. Figure 75 Universal Repeater Mode 12.10 Sys Op Mode Screen Use this screen to select how you want to use your WAP3205. Figure 76 Maintenance > Sys OP Mode The following table describes the labels in the General screen. Table 49 Maintenance > Sys OP Mode LABEL DESCRIPTION System Operation Mode Access Point Select Access Point Mode if your device bridges traffic between clients on the same network. • • 116 In Access Point mode all Ethernet ports have the same IP address. The default IP address of the device on the local network is 192.168.1.2. WAP3205 User’s Guide Chapter 12 Maintenance LABEL DESCRIPTION Client Mode Select Client Mode if your device needs a wireless client to connect to an existing access point. • • Universal Repeater Mode You cannot configure wireless LAN settings like MAC filtering, QoS, WDS and scheduling in the client mode. The IP address of the device on the local network is the same as the IP address given to the WAP3205 while in access point mode (default is 192.168.1.2). Select Universal Repeater Mode if you want to have wireless clients associate with the WAP3205 and also want to connect the WAP3205 to an existing access point. • • • In addition to wireless LAN settings between the WAP3205 and wireless clients, you also need to configure security and wireless settings between the WAP3205 and another access point. WDS is not available when the WAP3205 is in universal repeater mode. The IP address of the device on the local network is the same as the IP address given to the WAP3205 while in access point mode (default is 192.168.1.2). Apply Click Apply to save your settings. Reset Click Reset to return your settings to the default (Router) Note: If you select the incorrect System Operation Mode you may not be able to connect to the Internet. WAP3205 User’s Guide 117 Chapter 12 Maintenance 118 WAP3205 User’s Guide CHAPTER 13 Troubleshooting This chapter offers some suggestions to solve problems you might encounter. The potential problems are divided into the following categories. • Power, Hardware Connections, and LEDs • WAP3205 Access and Login • Internet Access • Resetting the WAP3205 to Its Factory Defaults • Wireless Router/AP Troubleshooting 13.1 Power, Hardware Connections, and LEDs The WAP3205 does not turn on. None of the LEDs turn on. 1 Make sure you are using the power adaptor or cord included with the WAP3205. 2 Make sure the power adaptor or cord is connected to the WAP3205 and plugged in to an appropriate power source. Make sure the power source is turned on. 3 Disconnect and re-connect the power adaptor or cord to the WAP3205. 4 If the problem continues, contact the vendor. One of the LEDs does not behave as expected. 1 Make sure you understand the normal behavior of the LED. See Section 1.5 on page 20. 2 Check the hardware connections. See the Quick Start Guide. WAP3205 User’s Guide 119 Chapter 13 Troubleshooting 3 Inspect your cables for damage. Contact the vendor to replace any damaged cables. 4 Disconnect and re-connect the power adaptor to the WAP3205. 5 If the problem continues, contact the vendor. 13.2 WAP3205 Access and Login I don’t know the IP address of my WAP3205. 1 The default IP address is 192.168.1.2. 2 If you changed the IP address and have forgotten it, • and your WAP3205 is a DHCP client, you can find your IP address from the DHCP server. This information is only available from the DHCP server which allocates IP addresses on your network. Find this information directly from the DHCP server or contact your system administrator for more information. • reset your WAP3205 to change all settings back to their default. This means your current settings are lost. See Section 13.4 on page 123 in the Troubleshooting for information on resetting your WAP3205. I forgot the password. 1 The default password is 1234. 2 If this does not work, you have to reset the device to its factory defaults. See Section 13.4 on page 123. I cannot see or access the Login screen in the Web Configurator. 1 Make sure you are using the correct IP address. • The default IP address is 192.168.1.2. • If you changed the IP address (Section 11.4 on page 103), use the new IP address. 120 WAP3205 User’s Guide Chapter 13 Troubleshooting • If you changed the IP address and have forgotten it, see the troubleshooting suggestions for I don’t know the IP address of my WAP3205. 2 Check the hardware connections, and make sure the LEDs are behaving as expected. See the Quick Start Guide. 3 Make sure your Internet browser does not block pop-up windows and has JavaScripts and Java enabled. See Appendix A on page 131. 4 Make sure your computer is in the same subnet as the WAP3205. (If you know that there are routers between your computer and the WAP3205, skip this step.) • If there is a DHCP server on your network, make sure your computer is using a dynamic IP address. See Section 14.3 on page 139. • If there is no DHCP server on your network, make sure your computer’s IP address is in the same subnet as the WAP3205. See Appendix B on page 139. 5 Reset the device to its factory defaults, and try to access the WAP3205 with the default IP address. See Section 12.7 on page 113. 6 If the problem continues, contact the network administrator or vendor, or try one of the advanced suggestions. Advanced Suggestion • If your computer is connected wirelessly, use a computer that is connected to a LAN port. I can see the Login screen, but I cannot log in to the WAP3205. 1 Make sure you have entered the password correctly. The default password is 1234. This field is case-sensitive, so make sure [Caps Lock] is not on. 2 This can happen when you fail to log out properly from your last session. Try logging in again after 5 minutes. 3 Disconnect and re-connect the power adaptor or cord to the WAP3205. 4 If this does not work, you have to reset the device to its factory defaults. See Section 13.4 on page 123. WAP3205 User’s Guide 121 Chapter 13 Troubleshooting 13.3 Internet Access I cannot access the Internet. 1 Check the hardware connections, and make sure the LEDs are behaving as expected. See the Quick Start Guide. 2 Make sure the WAP3205 is connected to a broadband modem or router with Internet access. 3 If you are trying to access the Internet wirelessly, make sure the wireless settings in the wireless client are the same as the settings in the AP. • Go to Network > Wireless LAN > General > WDS and check if the WAP3205 is set to bridge mode. Select Disable and try to connect to the Internet again. 4 Disconnect all the cables from your device, and follow the directions in the Quick Start Guide again. 5 Go to Maintenance > Sys OP Mode. Check your System Operation Mode setting. • Select Access Point Mode if your WAP3205 bridges traffic between clients on the same network. • Select Client Mode if your WAP3205 needs a wireless client to connect to an existing access point. • Select Universal Repeater Mode if you want to have wireless clients associate with the WAP3205 and also want to connect the WAP3205 to an existing access point. 6 If the problem continues, contact your ISP. I cannot access the Internet anymore. I had access to the Internet (with the WAP3205), but my Internet connection is not available anymore. 122 1 Check the hardware connections, and make sure the LEDs are behaving as expected. See the Quick Start Guide and Section 1.5 on page 20. 2 Reboot the WAP3205. 3 If the problem continues, contact your ISP. WAP3205 User’s Guide Chapter 13 Troubleshooting The Internet connection is slow or intermittent. 1 There might be a lot of traffic on the network. Look at the LEDs, and check Section 1.5 on page 20. If the WAP3205 is sending or receiving a lot of information, try closing some programs that use the Internet, especially peer-to-peer applications. 2 Check the signal strength. If the signal strength is low, try moving the clients closer to the AP if possible, and look around to see if there are any devices that might be interfering with the wireless network (for example, microwaves, other wireless networks, and so on). 3 Reboot the WAP3205. 4 If the problem continues, contact the network administrator or vendor, or try one of the advanced suggestions. Advanced Suggestions • Check the settings for QoS. If it is disabled, you might consider activating it. 13.4 Resetting the WAP3205 to Its Factory Defaults If you reset the WAP3205, you lose all of the changes you have made. The WAP3205 re-loads its default settings, and the password resets to 1234. You have to make all of your changes again. You will lose all of your changes when you push the RESET button. To reset the WAP3205, 1 Make sure the power LED is on. 2 Press the RESET button for longer than 1 second to restart/reboot the WAP3205. 3 Press the RESET button for longer than five seconds to set the WAP3205 back to its factory-default configurations. WAP3205 User’s Guide 123 Chapter 13 Troubleshooting If the WAP3205 restarts automatically, wait for the WAP3205 to finish restarting, and log in to the Web Configurator. The password is “1234”. If the WAP3205 does not restart automatically, disconnect and reconnect the WAP3205’s power. Then, follow the directions above again. 13.5 Wireless Router/AP Troubleshooting I cannot access the WAP3205 or ping any computer from the WLAN (wireless AP or router). 124 1 Make sure the wireless adapter on the wireless station is working properly. 2 Make sure the wireless adapter installed on your computer is IEEE 802.11 compatible and supports the same wireless standard as the WAP3205. 3 Make sure your computer (with a wireless adapter installed) is within the transmission range of the WAP3205. 4 Check that both the WAP3205 and your wireless station are using the same wireless and wireless security settings. WAP3205 User’s Guide CHAPTER 14 Product Specifications The following tables summarize the WAP3205’s hardware and firmware features. Table 50 Hardware Features Dimensions (W x D x H) 162 mm x 115 mm x 33 mm Weight 245 g Power Specification Input: 100~240 V AC, 50~60 Hz Output: 12 V DC 1A Two Ethernet ports Auto-negotiating: 10 Mbps, 100 Mbps in either half-duplex or fullduplex mode. Auto-crossover: Use either crossover or straight-through Ethernet cables. LEDs PWR, LAN1-2 WLAN, WPS Reset Button The reset button is built into the rear panel. Use this button to restore the WAP3205 to its factory default settings. Press for 1 second to restart the device. Press for 5 seconds to restore to factory default settings. WPS button Press the WPS on two WPS enabled devices within 120 seconds for a security-enabled wireless connection. Antenna The WAP3205 is equipped with two 2dBi (2.4GHz) detachable antennas to provide clear radio transmission and reception on the wireless network. Operation Environment Temperature: 0º C ~ 40º C / 32ºF ~ 104ºF Storage Environment Temperature: -30º C ~ 70º C / -22ºF ~ 158ºF Humidity: 20% ~ 90% Humidity: 20% ~ 95% Table 51 Firmware Features FEATURE DESCRIPTION Default IP Address 192.168.1.2 Default Subnet Mask 255.255.255.0 (24 bits) Default Password 1234 Wireless Interface Wireless LAN Default Wireless SSID ZyXEL WAP3205 User’s Guide 125 Chapter 14 Product Specifications Table 51 Firmware Features FEATURE DESCRIPTION Device Management Use the Web Configurator to easily configure the rich range of features on the WAP3205. Wireless Functionality Allows IEEE 802.11b, IEEE 802.11g and/or IEEE 802.11n wireless clients to connect to the WAP3205 wirelessly. Enable wireless security (WPA(2)-PSK) and/or MAC filtering to protect your wireless network. Note: The WAP3205 may be prone to RF (Radio Frequency) interference from other 2.4 GHz devices such as microwave ovens, wireless phones, Bluetooth enabled devices, and other wireless LANs. Firmware Upgrade Download new firmware (when available) from the ZyXEL web site and use the Web Configurator to put it on the WAP3205. Note: Only upload firmware for your specific model! Configuration Backup & Restoration Make a copy of the WAP3205’s configuration and put it back on the WAP3205 later if you decide you want to revert back to an earlier configuration. Wireless LAN Scheduler You can schedule the times the wireless LAN is enabled/ disabled. Time and Date Get the current time and date from an external server when you turn on your WAP3205. You can also set the time manually. These dates and times are then used in logs. IP Multicast IP Multicast is used to send traffic to a specific group of computers. The WAP3205 supports versions 1 and 2 of IGMP (Internet Group Management Protocol) used to join multicast groups (see RFC 2236). Logging Use logs for troubleshooting. You can view logs in the Web Configurator. 14.1 Wall-mounting Instructions Complete the following steps to hang your WAP3205 on a wall. 1 Select a position free of obstructions on a sturdy wall. 2 Drill two holes for the screws. Be careful to avoid damaging pipes or cables located inside the wall when drilling holes for the screws. 3 126 Do not insert the screws all the way into the wall. Leave a small gap of about 0.5 cm between the heads of the screws and the wall. WAP3205 User’s Guide Chapter 14 Product Specifications 4 Make sure the screws are snugly fastened to the wall. They need to hold the weight of the WAP3205 with the connection cables. 5 Align the holes on the back of the WAP3205 with the screws on the wall. Hang the WAP3205 on the screws. Figure 77 Wall-mounting Example The following are dimensions of an M4 tap screw and masonry plug used for wall mounting. All measurements are in millimeters (mm). Figure 78 Masonry Plug and M4 Tap Screw WAP3205 User’s Guide 127 Chapter 14 Product Specifications 128 WAP3205 User’s Guide P ART IV Appendices and Index Pop-up Windows, JavaScripts and Java Permissions (131) IP Addresses and Subnetting (139) Setting up Your Computer’s IP Address (149) Wireless LANs (167) Common Services (179) Legal Information (183) Index (191) 129 130 APPENDIX A Pop-up Windows, JavaScripts and Java Permissions In order to use the Web Configurator you need to allow: • Web browser pop-up windows from your device. • JavaScripts (enabled by default). • Java permissions (enabled by default). Note: Internet Explorer 6 screens are used here. Screens for other Internet Explorer versions may vary. Internet Explorer Pop-up Blockers You may have to disable pop-up blocking to log into your device. Either disable pop-up blocking (enabled by default in Windows XP SP (Service Pack) 2) or allow pop-up blocking and create an exception for your device’s IP address. Disable pop-up Blockers 1 In Internet Explorer, select Tools, Pop-up Blocker and then select Turn Off Pop-up Blocker. Figure 79 Pop-up Blocker You can also check if pop-up blocking is disabled in the Pop-up Blocker section in the Privacy tab. WAP3205 User’s Guide 131 Appendix A Pop-up Windows, JavaScripts and Java Permissions 1 In Internet Explorer, select Tools, Internet Options, Privacy. 2 Clear the Block pop-ups check box in the Pop-up Blocker section of the screen. This disables any web pop-up blockers you may have enabled. Figure 80 Internet Options: Privacy 3 Click Apply to save this setting. Enable pop-up Blockers with Exceptions Alternatively, if you only want to allow pop-up windows from your device, see the following steps. 1 132 In Internet Explorer, select Tools, Internet Options and then the Privacy tab. WAP3205 User’s Guide Appendix A Pop-up Windows, JavaScripts and Java Permissions 2 Select Settings…to open the Pop-up Blocker Settings screen. Figure 81 Internet Options: Privacy 3 Type the IP address of your device (the web page that you do not want to have blocked) with the prefix “http://”. For example, http://192.168.167.1. WAP3205 User’s Guide 133 Appendix A Pop-up Windows, JavaScripts and Java Permissions 4 Click Add to move the IP address to the list of Allowed sites. Figure 82 Pop-up Blocker Settings 5 Click Close to return to the Privacy screen. 6 Click Apply to save this setting. JavaScripts If pages of the Web Configurator do not display properly in Internet Explorer, check that JavaScripts are allowed. 134 WAP3205 User’s Guide Appendix A Pop-up Windows, JavaScripts and Java Permissions 1 In Internet Explorer, click Tools, Internet Options and then the Security tab. Figure 83 Internet Options: Security 2 Click the Custom Level... button. 3 Scroll down to Scripting. 4 Under Active scripting make sure that Enable is selected (the default). 5 Under Scripting of Java applets make sure that Enable is selected (the default). WAP3205 User’s Guide 135 Appendix A Pop-up Windows, JavaScripts and Java Permissions 6 Click OK to close the window. Figure 84 Security Settings - Java Scripting Java Permissions 136 1 From Internet Explorer, click Tools, Internet Options and then the Security tab. 2 Click the Custom Level... button. 3 Scroll down to Microsoft VM. 4 Under Java permissions make sure that a safety level is selected. WAP3205 User’s Guide Appendix A Pop-up Windows, JavaScripts and Java Permissions 5 Click OK to close the window. Figure 85 Security Settings - Java JAVA (Sun) 1 From Internet Explorer, click Tools, Internet Options and then the Advanced tab. 2 Make sure that Use Java 2 for
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Annotate, Fill forms, Extract, Print high-res Modify Date : 2009:06:01 13:56:40+08:00 Create Date : 2009:06:01 09:47:09Z Page Count : 196 Page Mode : UseOutlines About : uuid:7e19e169-2bfd-4fb5-aeb0-fd2d803b2693 Producer : Acrobat Distiller 6.0.1 (Windows) Creation Date : 2009:06:01 09:47:09Z Mod Date : 2009:06:01 13:56:40+08:00 Author : 13508 Creator Tool : FrameMaker 7.1 Metadata Date : 2009:06:01 13:56:40+08:00 Document ID : uuid:591c7af9-bb35-424e-b011-d219199aa804 Format : application/pdf Title : WAP3205 v1.00 User掇 Guide Creator : 13508EXIF Metadata provided by EXIF.tools