Zyxel Communications Network Router Vsg1432 B101 Series Users Manual

2015-01-23

• VSG1432-B101 Series
  • About This User's Guide
  • Document Conventions
  • Safety Warnings
  • Contents Overview
  • Table of Contents
• User’s Guide
  • Introducing the VSG1432-B101
    • 1.1 Overview
    • 1.2 Ways to Manage the ZyXEL Device
    • 1.3 Good Habits for Managing the ZyXEL Device
    • 1.4 Applications for the ZyXEL Device
      • 1.4.1 Internet Access
      • 1.4.2 ZyXEL Device’s USB Support
    • 1.5 Hardware Setup
    • 1.6 Hardware Connections
    • 1.7 LEDs (Lights)
    • 1.8 The RESET Button
    • 1.9 Wireless Access
      • 1.9.1 Using the WLAN/WPS Button
  • The Web Configurator
    • 2.1 Overview
      • 2.1.1 Accessing the Web Configurator
    • 2.2 Web Configurator Layout
      • 2.2.1 Title Bar
      • 2.2.2 Main Window
      • 2.2.3 Navigation Panel
  • Quick Start
    • 3.1 Overview
    • 3.2 Quick Start Setup
  • Tutorials
    • 4.1 Overview
    • 4.2 Setting Up an ADSL PPPoE Connection
    • 4.3 Setting Up a Secure Wireless Network
      • 4.3.1 Configuring the Wireless Network Settings
      • 4.3.2 Using WPS
      • 4.3.3 Without WPS
    • 4.4 Setting Up Multiple Wireless Groups
    • 4.5 Setting Up NAT Port Forwarding
    • 4.6 Configuring Static Route for Routing to Another Network
    • 4.7 Configuring QoS Queue and Class Setup
    • 4.8 Access the ZyXEL Device Using DDNS
      • 4.8.1 Registering a DDNS Account on www.dyndns.org
      • 4.8.2 Configuring DDNS on Your ZyXEL Device
      • 4.8.3 Testing the DDNS Setting
    • 4.9 Access Your Shared Files From a Computer
• Technical Reference
  • Network Map and Status Screens
    • 5.1 Overview
    • 5.2 The Network Map Screen
    • 5.3 The Status Screen
  • Broadband
    • 6.1 Overview
      • 6.1.1 What You Need to Know
      • 6.1.2 Before You Begin
    • 6.2 The Broadband Screen
      • 6.2.1 Add/Edit Broadband
      • 6.2.2 PPPoE Encapsulation
    • 6.3 Technical Reference
      • 6.3.1 Encapsulation
      • 6.3.2 Multiplexing
      • 6.3.3 VPI and VCI
      • 6.3.4 IP Address Assignment
      • 6.3.5 NAT
      • 6.3.6 Traffic Shaping
      • 6.3.7 ATM Traffic Classes
      • 6.3.8 Introduction to VLANs
  • Wireless
    • 7.1 Overview
      • 7.1.1 What You Can Do in this Chapter
      • 7.1.2 What You Need to Know
    • 7.2 The General Screen
      • 7.2.1 No Security
      • 7.2.2 Basic (WEP Encryption)
      • 7.2.3 More Secure (WPA(2)-PSK)
      • 7.2.4 WPA(2) Authentication
    • 7.3 The More AP Screen
      • 7.3.1 Edit More AP
    • 7.4 MAC Authentication
    • 7.5 The WPS Screen
    • 7.6 The WMM Screen
    • 7.7 The WDS Screen
      • 7.7.1 WDS Scan
    • 7.8 The Others Screen
    • 7.9 Technical Reference
      • 7.9.1 Wireless Network Overview
      • 7.9.2 Additional Wireless Terms
      • 7.9.3 Wireless Security Overview
      • 7.9.4 Signal Problems
      • 7.9.5 BSS
      • 7.9.6 MBSSID
      • 7.9.7 Preamble Type
      • 7.9.8 Wireless Distribution System (WDS)
      • 7.9.9 WiFi Protected Setup (WPS)
  • Home Networking
    • 8.1 Overview
      • 8.1.1 What You Can Do in this Chapter
      • 8.1.2 What You Need To Know
      • 8.1.3 Before You Begin
    • 8.2 The LAN Setup Screen
    • 8.3 The Static DHCP Screen
    • 8.4 The UPnP Screen
    • 8.5 Installing UPnP in Windows Example
    • 8.6 Using UPnP in Windows XP Example
    • 8.7 Technical Reference
      • 8.7.1 LANs, WANs and the ZyXEL Device
      • 8.7.2 DHCP Setup
      • 8.7.3 DNS Server Addresses
      • 8.7.4 LAN TCP/IP
  • Static Routing
    • 9.1 Overview
    • 9.2 The Routing Screen
      • 9.2.1 Add/Edit Static Route
  • Quality of Service (QoS)
    • 10.1 Overview
      • 10.1.1 What You Can Do in this Chapter
    • 10.2 What You Need to Know
    • 10.3 The Quality of Service General Screen
    • 10.4 The Queue Setup Screen
      • 10.4.1 Adding a QoS Queue
    • 10.5 The Class Setup Screen
      • 10.5.1 Add/Edit QoS Class
    • 10.6 The QoS Policer Setup Screen
      • 10.6.1 Add/Edit a QoS Policer
    • 10.7 The QoS Monitor Screen
    • 10.8 Technical Reference
  • Policy Forwarding
    • 11.1 Overview
    • 11.2 The Policy Forwarding Screen
      • 11.2.1 Add/Edit Policy Forwarding
  • Network Address Translation (NAT)
    • 12.1 Overview
      • 12.1.1 What You Can Do in this Chapter
      • 12.1.2 What You Need To Know
    • 12.2 The Port Forwarding Screen
      • 12.2.1 Add/Edit Port Forwarding
    • 12.3 The Applications Screen
      • 12.3.1 Add New Application
    • 12.4 The Port Triggering Screen
      • 12.4.1 Add/Edit Port Triggering Rule
    • 12.5 The DMZ Screen
    • 12.6 The ALG Screen
    • 12.7 The Sessions Screen
    • 12.8 Technical Reference
      • 12.8.1 NAT Definitions
      • 12.8.2 What NAT Does
      • 12.8.3 How NAT Works
      • 12.8.4 NAT Application
  • Dynamic DNS Setup
    • 13.1 Overview
      • 13.1.1 What You Can Do in this Chapter
      • 13.1.2 What You Need To Know
    • 13.2 The DNS Entry Screen
      • 13.2.1 Add/Edit DNS Entry
    • 13.3 The Dynamic DNS Screen
  • IGMP
    • 14.1 Overview
      • 14.1.1 What You Can Do in this Chapter
      • 14.1.2 What You Need to Know
    • 14.2 The IGMP General Screen
    • 14.3 IGMP Filter Configuration
      • 14.3.1 IGMP Host Limitation Edit
      • 14.3.2 IGMP Service Add
      • 14.3.3 IGMP Host Limitation Add
    • 14.4 IGMP ACL Configuration
      • 14.4.1 IGMP ACL Add
  • Interface Group
    • 15.1 Overview
      • 15.1.1 What You Can Do in this Chapter
    • 15.2 The Interface Group Screen
      • 15.2.1 Interface Group Configuration
  • Firewall
    • 16.1 Overview
      • 16.1.1 What You Can Do in this Chapter
      • 16.1.2 What You Need to Know
    • 16.2 The Firewall Screen
    • 16.3 The Protocol Screen
      • 16.3.1 Add a Protocol
    • 16.4 The Access Control Screen
      • 16.4.1 Add/Edit an ACL Rule
  • MAC Filter
    • 17.1 Overview
    • 17.2 The MAC Filter Screen
  • Parental Control
    • 18.1 Overview
    • 18.2 The Parental Control Screen
      • 18.2.1 Add/Edit Parental Control Rule
  • Scheduler Rules
    • 19.1 Overview
    • 19.2 The Scheduler Rules Screen
      • 19.2.1 Add/Edit a Schedule
  • Certificates
    • 20.1 Overview
      • 20.1.1 What You Can Do in this Chapter
    • 20.2 What You Need to Know
    • 20.3 The Local Certificates Screen
      • 20.3.1 Create Certificate Request
      • 20.3.2 Load Signed Certificate
      • 20.3.3 Import Certificate
      • 20.3.4 Certificate Details
    • 20.4 The Trusted CA Screen
      • 20.4.1 View Trusted CA Certificate
      • 20.4.2 Import Trusted CA Certificate
  • IPSec
    • 21.1 Overview
      • 21.1.1 What You Can Do in this Chapter
      • 21.1.2 What You Need to Know
    • 21.2 The IPSec Status Screen
    • 21.3 The IPSec Settings Screen
      • 21.3.1 Add/Edit IPSec Setting
      • 21.3.2 Configuring Manual Key
    • 21.4 Technical Reference
      • 21.4.1 IPSec Architecture
      • 21.4.2 Encapsulation
      • 21.4.3 IKE Phases
      • 21.4.4 Negotiation Mode
      • 21.4.5 IPSec and NAT
      • 21.4.6 VPN, NAT, and NAT Traversal
      • 21.4.7 ID Type and Content
      • 21.4.8 Pre-Shared Key
      • 21.4.9 Diffie-Hellman (DH) Key Groups
  • Service Control
    • 22.1 Overview
    • 22.2 The Service Control Screen
  • ARP Table
    • 23.1 Overview
      • 23.1.1 How ARP Works
    • 23.2 ARP Table Screen
  • Logs
    • 24.1 Overview
      • 24.1.1 What You Can Do in this Chapter
      • 24.1.2 What You Need To Know
    • 24.2 The System Log Screen
    • 24.3 The Security Log Screen
  • Traffic Status
    • 25.1 Overview
      • 25.1.1 What You Can Do in this Chapter
    • 25.2 The WAN Status Screen
    • 25.3 The LAN Status Screen
  • IGMP Status
    • 26.1 Overview
      • 26.1.1 What You Can Do in this Chapter
    • 26.2 The IGMP Group Screen
    • 26.3 IGMP Statistics Screen
  • Users Configuration
    • 27.1 Overview
    • 27.2 The Users Configuration Screen
      • 27.2.1 Add/Edit a Users Account
  • Remote Management
    • 28.1 Overview
      • 28.1.1 What You Can Do in this Chapter
    • 28.2 The TR-069 Clients Screen
    • 28.3 The TR-064 Screen
  • Time Settings
    • 29.1 Overview
    • 29.2 The Time Setting Screen
  • Logs Setting
    • 30.1 Overview
    • 30.2 The Log Settings Screen
      • 30.2.1 Example E-mail Log
  • Firmware Upgrade
    • 31.1 Overview
    • 31.2 The Firmware Screen
  • Configuration
    • 32.1 Overview
    • 32.2 The Configuration Screen
    • 32.3 The Reboot Screen
  • Diagnostic
    • 33.1 Overview
    • 33.2 The Diagnostic Screen
  • Troubleshooting
    • 34.1 Power, Hardware Connections, and LEDs
    • 34.2 ZyXEL Device Access and Login
    • 34.3 Internet Access
    • 34.4 Wireless Internet Access
  • Product Specifications
    • 35.1 Hardware Specifications
    • 35.2 Firmware Specifications
  • Setting up Your Computer’s IP Address
  • IP Addresses and Subnetting
  • Pop-up Windows, JavaScripts and Java Permissions
  • Wireless LANs
  • Services
  • Open Software Announcements
  • Legal Information
  • Index