Abbyy Machine Readable Forms Flexi Capture 11.0 Guide To Creating 11 FCG EN

User Manual: abbyy FlexiCapture - 11.0 - Guide to Creating Machine-Readable Forms Free User Guide for ABBYY FlexiCapture Software, Manual

Open the PDF directly: View PDF .
Page Count: 13

What is a Form?
Machine–Readable Forms
- Form Completion Methods
- Elements of Machine–Readable Forms
Types of Machine–Readable Form
General Requirements for Machine–Readable Forms

ABBYY FlexiCapture

A Guide to Creating

Machine-Readable Forms

ABBYY FlexiCapture

Dynamic Data Capture System

Table of Contents

What is a Form? ................................................................................................................ 3

Machine–Readable Forms ................................................................................................. 4

Form Completion Methods ........................................................................................................................................................................................................... 4

Elements of Machine–Readable Forms.................................................................................................................................................................................. 4

Text ........................................................................................................................................................................... 4

Entry Field ................................................................................................................................................................ 4

Checkmark Field....................................................................................................................................................... 5

Checkmark Group .................................................................................................................................................... 5

Reference Mark ......................................................................................................................................................... 5

Line Separator .......................................................................................................................................................... 5

Form Identifier ......................................................................................................................................................... 5

Picture ...................................................................................................................................................................... 5

Table ......................................................................................................................................................................... 6

Group of elements .................................................................................................................................................... 6

Types of Machine–Readable Form .................................................................................... 7

Dropout Forms ...................................................................................................................................................................................................................................... 7

Choosing the Right Color ........................................................................................................................................... 8

Black–and–White Forms with Raster Backgrounds ..................................................................................................................................................... 8

Black–and–White Forms with Raster Borders ................................................................................................................................................................. 8

Black–and–White Linear Forms ................................................................................................................................................................................................ 8

Choosing the Right Type of Form ............................................................................................................................................................................................. 8

General Requirements for Machine–Readable Forms ..................................................... 10

Form Background ............................................................................................................................................................................................................................. 10

Reference Mark ................................................................................................................................................................................................................................... 10

Checkmark Field ................................................................................................................................................................................................................................ 11

Text Marking ........................................................................................................................................................................................................................................ 11

Element Positioning ........................................................................................................................................................................................................................ 11

Print Quality ......................................................................................................................................................................................................................................... 12

Form Completion.............................................................................................................................................................................................................................. 12

Recommended Colors for Dropout Forms....................................................................................................................................................................... 13

ABBYY FlexiCapture

Dynamic Data Capture System

What is a Form?

Questionnaires, social security forms, polling slips, warranty cards are all different types of

form used to collect different types of information.

How do forms differ from other types of documents?

1. A form always has a set number of fields

2. Each field may contain only a certain type of information, e.g. a "Last

Name" field contains only last names (if completed correctly) and a "Date" field

contains only dates.

Forms are used when information must be gathered from a large number of respondents.

Manual information gathering is a long and tiresome process where typos and errors are

almost inevitable, and machine–readable forms are used to automate this process.

Automated forms processing consists of the following stages:

1. Setting up the form–processing application (creating a template and

specifying the fields to be recognized).

2. Acquiring form images (scanning).

3. Processing the form images (recognizing the images and validating

the extracted data).

4. Exporting the extracted data to an external information system.

Automated forms processing is most effective on forms that meet certain requirements

which are discussed in this chapter.

ABBYY FlexiCapture

Dynamic Data Capture System

Machine–Readable Forms

To be able to read information on the forms, a form–processing application must do the following:

1. Determine the location of form elements.

2. Separate field contents from field borders, text marking, backgrounds, explanatory text, etc.

Machine–readable forms enable the program to carry out these tasks.

In order for the first task to be carried out successfully, the forms must correspond to the form pattern or template, i.e. the

location of all form elements must be identical on all forms of the same type.

In order for the second task to be carried out successfully, the forms must be designed with automated input in mind, i.e. so

that the program can easily distinguish between the data to be captured and such non–recognizable form elements as field borders,

text marking, backgrounds, or explanatory text.

Form Completion Methods

A form may be completed in one of the following ways:

● by hand

● using a dot–matrix printer

● using a typewriter

● at a printing shop (here belong also forms completed using inkjet or laser printers with a resolution of

no less than 300 dpi)

● using a combination of the above

Elements of Machine–Readable Forms

The following elements may be present on a form:

Text

Text is an element of a machine–readable form that contains descriptive text: form title, field names, explanations, etc.

Entry Field

An entry field is an element of a machine–readable form into which text is entered by the person who completes the form. To facili-

tate text entry, entry fields may contain special text marking. Entry fields are usually accompanied by text that describes or explains the

nature of the data to be entered.

Possible text marking types are listed in the table below.

Text over a Line

Text is entered over a line.

Letters in Frames

Letters are entered into conjoined frames.

Letters in Separate Frames

Letters are entered into isolated frames.

Letters on a Comb

Letters are entered over a comb.

Text in a Frame

Text is entered in a frame.

Text in a Frame with a Comb

Text is entered in a frame with a comb.

ABBYY FlexiCapture

Dynamic Data Capture System

Checkmark Field

A checkmark field is an element of a machine–readable form (usually a square that is called a "check box") in which a mark should

be made by the person who completes the form.

A checkmark field usually has an accompanying text which explains the use of the checkmark.

Possible shapes of checkmark fields are shown in the table below.

Square Circle Underline

Other shapes are also possible, e.g. polygons, ovals, etc.

Checkmark Group

A checkmark group is an element of a machine–readable form that unites several checkmark fields of which only one must be

checked. Checkmark groups are usually accompanied by explanatory text that explains the nature of the choice to be made

Reference Mark

A reference mark is an element of a machine–readable form that is used to facilitate the matching of form images with templates

and to determine the orientation of forms during automated processing.

Before the program can start recognizing the contents of the form, it must match the form with its template. All machine–readable

forms of the same type must conform to one template, i.e. the location of all form elements must be exactly the same on all forms. The

program will attempt to match the form with its template relying on the number and location of the reference marks on the form. If

the program manages to match the reference marks on the form with the reference marks on the template, it will know exactly where

to look for fields containing data to be recognized.

Standard reference marks are listed in the table below.

Black Square

Corner

Cross

Timing Mark

For best recognition results, it is advisable to have standard reference marks on the form, but in some cases line separators, explanatory

text or barcodes can also be used as reference marks. However, standard reference marks are more reliable and should always be your

first choice.

Line Separator

A line separator is an element of a machine–readable form in the shape of a vertical or horizontal black line.

Line separators are used for partitioning forms into several logical segments.

Form Identifier

A form identifier is an element of a machine–readable form that is used for selecting the right template if several templates have the

same arrangement of reference marks.

We recommend using barcodes as form identifiers.

A barcode is a set of vertical black and white lines of differing widths used for encoding information.

Some other elements on the form can also be used as form identifiers.

Picture

A picture is an element of a machine–readable form that should not be recognized and should be exported as an image file.

ABBYY FlexiCapture

Dynamic Data Capture System

For example, the part of the form where a stamp or signature should be put is a picture.

Table

A table contains columns with same-type elements.

Table columns can contain elements of the following types:

● text;

● entry field;

● date;

● number;

● checkmark.

A table can contain a line with column headers.

Group of elements

Group of elements – an element of a machine-readable form that serves to combine several logically linked elements in a group.

ABBYY FlexiCapture

Dynamic Data Capture System

Types of Machine–Readable Form

Machine–readable forms are designed with automated input in mind, i.e. the program should be able to easily distinguish be-

tween the data to be captured and the non–recognizable form elements, such as field borders, text marking, backgrounds, or explana-

tory text.

This can be achieved in one of two ways:

1. The form must be designed in such a way as to make the field borders, background and text marking disappear after scan-

ning, or

2. The form must be designed in such a way as to make the field borders, background and text marking stand out clearly after

scanning.

If the first approach is used, only the reference marks, explanatory text, and entered data will remain on the form after scanning. As a

result, the program will not have to separate the data from form elements, which will make recognition more easy and reliable.

In this case, the following types of forms are used: color dropout forms, black–and–white forms with raster backgrounds, black–and–

white forms with raster borders, and black–and–white linear forms.

If the second approach is used, the reference marks, explanatory text, entered data, as well as text marking and field borders will re-

main on the form after scanning. The program will look for information that is surrounded by field borders and text marking. An ab-

sence of these form elements will have an adverse effect on the quality of recognition.

In this case, black–and–white linear forms are used.

Dropout Forms

Dropout forms have a light color background with white rectangles serving as character cells, checkmark fields, etc.

For example, gray drop–out forms. Their background is gray.

Color drop–out forms include forms on which only element borders are colored.

A character cell is a small rectangle into which only one character should be entered (e.g. a letter or a digit). The color of the back-

ground is very important because it must disappear during scanning. The background is usually light red–orange or green. For the list

of recommended colors, see in “Recommended Colors for Dropout Forms”.

Ideally, all form elements, with the exception of the reference marks, should disappear

during scanning, leaving only the field contents to be recognized on the form image.

Explanatory text can be either retained (if printed in black) or filtered out together

with the background. For explanatory text to disappear during scanning, it must be

printed in the same color as the form’s background but with greater saturation.

When deciding whether to print explanatory text in black or in background color, the

following should be taken into account:

● The size of the image file will be larger if the explanatory text is retained.

● There should be at least 1.5–2 mm of space between the explanatory text

printed in black and other elements on the form. The gap between the expla-

natory text and the corresponding checkmark field must not be less than 2/3

of the size of the checkmark field. If the explanatory text is printed in back-

ground color, spaces between the text and other form elements are not so cru-

cial.

Forms with explanatory text printed in black are more legible. We recommend print-

ing explanatory text in black especially if there are no reference marks on the form.

Tip When creating a template for a form with explanatory text printed in back-

ground color, be sure to scan the form in color or in grayscale mode to make the explanatory text and elements on the form clearly

visible.

Dropout forms must be scanned using a color lamp or filter. The color of the lamp is selected depending on the color of the back-

ground.

Forms with red or green backgrounds must be scanned either:

● on a color scanner using color filtering software;

● on a non–color scanner using a red or green lamp (hardware color filtering);

ABBYY FlexiCapture

Dynamic Data Capture System

● on a non–color scanning using a white lamp and a red or green filter (filtering quality in this case is much lower, as the

background may not disappear completely, or field contents may be inadvertently removed); or

● on a non–color scanner using a white lamp without any filters.

When scanning with a white lamp, some lighter backgrounds can be removed without filtering: the weak saturation of the

background will ensure its disappearance during scanning. In this case, the color and saturation of the background must be

selected by trial–and–error for each particular scanner.

Note. Many color scanners also have software filtering used to filter out blue colors. However, we do not recommend using shades

of blue on your forms, as forms are likely to be completed using not only black but also blue ink. Field contents written in blue ink will

disappear in this case.

Choosing the Right Color

Red–orange colors are preferable to green because they represent the greatest possible contrast to blue, which results in better scan-

ning and recognition quality if the forms are completed using blue ink.

In “Recommended Colors for Dropout Forms” you will find the recommended colors for form processing, i.e. those most likely to

disappear during scanning with almost any scanner. A “dropout” color list for a particular scanner (in Pantone or any other format)

can also be obtained from your scanner manufacturer/dealer.

Black–and–White Forms with Raster Backgrounds

Fields on such forms are simply white spaces (usually rectangles) on a raster background. The background is made up of individual

dots. The recommended size of the dots is no more than 0.1 mm, with the distance between each dot about 1 mm. The size of the dots

and distance between the dots are crucial, because a raster background is removed during despeckling rather than during scanning: the

program will treat the dots as garbage and remove them. Consequently, the dots should not be glued together on scanned images.

Black–and–White Forms with Raster Borders

These forms have no background. All field borders (borders of character cells, checkmark fields and other form elements) are made up

of raster lines, i.e. sequences of small black dots. Raster dot size is usually 0.39–0.5 pt. The recommended size is 0.39 pt, with the dis-

tance between the raster dots being at least five times larger than the dot size. The size of the dots and distance between the dots are

crucial, because a raster background is removed during despeckling rather than during scanning: the program will treat the dots as

garbage and remove them. Consequently, the dots should not be glued together on scanned images.

Black–and–White Linear Forms

These forms usually have no background. All field borders (character cells, checkmark fields and other form elements) are made up of

solid black lines. Field borders do not disappear as a result of scanning or despeckling.

Note. Forms of this type must be completed very neatly. If the forms are completed carelessly, letters may overlap the field borders,

thus reducing recognition quality. This is because whenever the field content overlaps the field borders, it is extremely difficult for the

application to separate the borders from the text. Ideally, the entered text should not touch upon the field borders.

Choosing the Right Type of Form

Besides the design and processing requirements for each type of form, other criteria also need to be taken into consideration when

choosing a form type: printing costs and methods, the number of copies required, the resulting image size, scanning modes, the re-

quired degree of recognition accuracy, form processing speed, overall appearance of the forms, how neatly they will be completed, etc.

The table below summarizes the advantages and disadvantages of each form type.

Criteria

Dropout Form

Black–and–White Raster Form

Black–and–White Linear Form

Disadvantage

Advantage

Disadvantage

Advantage

Disadvantage

Advantage

Design

Complexity

Easy to design using

any graphics editor.

Text editors offer

limited tools for

designing this type

of form. The size of

raster dots is

crucial.

Easy to design

using any graph-

ics editor

ABBYY FlexiCapture

Dynamic Data Capture System

Criteria

Dropout Form

Black–and–White Raster Form

Black–and–White Linear Form

Disadvantage

Advantage

Disadvantage

Advantage

Disadvantage

Advantage

Printing

Difficult to print

large quantities of

good quality forms

in–house.

Easy to print in–

house.

Easy to print in–

house.

Printing

Costs

If professional

printing services are

used, printing costs

are higher

compared

with black–and–

white forms.

If professional

printing services

are used, print-

ing costs are

lower compared

with dropout

forms.

If professional

printing services

are used, print-

ing costs are

lower compared

with dropout

forms

Image Size

Image file sizes are

smaller.

Image file sizes are

larger.

Image file sizes are

larger.

Scanning

Mode

Only special scan-

ning modes (color

filtering) may be

used.

Limited range of

brightness and

contrast settings.

Limited range of

brightness and

contrast settings.

Processing

Speed

Higher average

processing speed.

Average processing

time is longer, be-

cause the images

need to be des-

peckled.

Errors are more

likely if characters

are glued together

or overlap field

borders.

Recognition

Quality

Very high

recognition quality.

High recognition

quality.

Recognition quali-

ty largely depends

on how neatly the

form has been

filled out.

High recognition

quality if the

form has been

filled out cor-

rectly.

Location of

explanatory

text

Explanatory text

may be placed any-

where, including

side fields (as long

it is printed using

the same color as

the form back-

ground).

Explanatory text

and other form

elements must be

carefully arranged

on the form.

Explanatory text

and other form

elements must be

carefully arranged

on the form.

Form

Appearance

and

Legibility

Low contrast set-

tings of background

and explanatory

text may have an

adverse effect on

form legibility.

Aesthetically

pleasing

Less eye–catching

design. Lower legi-

bility.

Less eye–catching

design.

Good legibility.

Neatness of

Completion

Less sensitive to text

overlapping field

borders.

Small characters

must be written

very carefully and

be la

rge enough not

to be removed as

garbage.

Less sensitive to

text overlapping

field borders.

Very sensitive to

text overlapping

field borders.

ABBYY FlexiCapture

Dynamic Data Capture System

General Requirements for Machine–Readable Forms

Let us now consider the general requirements a form must meet in order to be machine–readable.

Form Background

1. Use dropout forms or forms with raster field borders if possible.

2. Use a color that vanishes during scanning when creating a dropout form. See the list of recommended colors in “Recom-

mended Colors for Dropout Forms”.

3. Always ensure that a distance exists between the explanatory text and the field contents. In the case of dropout forms we

recommend that any information be printed in the same color as the form background (except where explanatory text is

used as a reference mark instead of or in conjunction with black squares). By printing information in the same color as the

background, you are then free to place it anywhere on the form, including inside the form fields.

4. Do not use blue colors for forms which are to be completed by hand. The blue background may merge with the blue ink

which is likely to be used to complete the forms, which will have an adverse effect on recognition quality.

Reference Mark

1. Standard reference marks are recommended for use on machine–readable forms (i.e. black squares, corners, Crosses). The

recommended number of reference marks is five: four reference marks in each corner of the form (they should form a rec-

tangle if imaginary lines are drawn between each pair) and one square on one of the sides of the imaginary rectangle.

2. If, for some reason, standard reference marks cannot be used, we recommend that the following combinations of elements

be used as reference marks:

a) at least two vertical line separators and two horizontal line separators

b) at least four text elements and one form identifier element

c) other combinations are also possible

3. The distance between the edge of a reference mark and the nearest form element should not be less than 3 mm.

4. The distance between a reference mark and the edge of the page should not be less than 8 mm.

5. Reference marks should be printed using a dark color (black is recommended) so that they do not disappear during scan-

ning.

In addition to the general requirements listed above, each reference mark type has its own specific requirements:

Black Squares

Black squares on the same form type should all be of the same size i.e. between 4x4 mm and 8x8 mm. The recommended size is 5x5

mm. Rectangles are not permitted.

Crosses and Corners

1. The size of an imaginary square that could be drawn around a reference mark of this type must be within the range from

4x4 to 8x8 mm. The recommended size is 5x5 mm.

2. The size of reference marks of one type must be the same within one form.

3. All the sides of a reference mark must be of equal size.

4. The line thickness used for reference marks on the same form must be the same and be within the range from 0.3 to 1 mm.

The recommended thickness is 0.5 mm.

Text (if used as reference marks)

The font size should not be less than 7 pt (headers – no less than 14 pt).

Line Separators (if used as reference marks)

Line thickness should not be less than 1 pt. The recommended thickness is 1–1.5 pt.

Barcodes (if used as reference marks)

1. The barcode width (the distance between the leftmost and the rightmost bars) should not be less than 47–50 mm.

2. The barcode height should not be less than 12–15 mm (digits not included).

3. The barcode orientation (direction of the bars) should be the same as the page orientation (it is recommended to scan the

pages in the direction of the bars).

4. The EAN 13 barcode format is recommended.

5. The recommended distance between a barcode and any other form element is no less than 10 mm.

ABBYY FlexiCapture

Dynamic Data Capture System

Checkmark Field

1. The recommended field sizes are 3.5x3.5 mm, 4x4 mm, 4.5x4.5 mm, or 5x5 mm (if circular checkmark fields are used, they

must fit into squares of recommended sizes).

2. The recommended line width for checkmark field borders is 0.4 mm (irrespective of the size of the field).

Text Marking

Raster dot size:

1. If the field borders are raster dots, the thickness of the raster line (i.e. the raster size) must be 0.39 pt.

2. The optimal distance between the raster dots is five times their size.

Important! The dots most likely to be glued together are dots in the corners of character cells.

Tip. If your software does not allow you to specify the distance between each raster dot, you must choose a line style which has dots

located at sufficient distance from each other to prevent them from becoming glued together on the scanned image, and from remain-

ing on the image after image despeckling, as big dots are not interpreted by the OCR system as garbage and are not removed from the

image during despeckling.

Character cell size:

1. The recommended size of character cells is 4x5 mm; the use of smaller sizes requires a

greater degree of accuracy from those completing the form, and this is very difficult to achieve. Large

character cells are also not advisable as this encourages the use of abnormally large letters. Ideally,

the character cell size should reflect the average letter size.

2. The distance between field lines should be no less than 2.5 – 3 mm, and the distance be-

tween two adjacent character cells in the same line should be no less than 1–1.2 mm.

Line thickness:

If the borders are black lines (“text in a frame”, “letters in separate frames”, or “letters in frames”),

the line thickness should be 1 pt.

Combs:

1. The recommended distance between the notches in a comb is 5 mm.

2. The distance between between the horizontal lines of two combs, when posi-

tioned one below the other, should be no less than 7.5 – 8 mm.

3. The notch height must be around 0.9 – 1.2 mm.

4. The thickness of both the notches and horizontal lines should be 1 pt.

5. If frames with a comb are used, the minimum distance between frames should

be 2.5 – 3 mm.

Element Positioning

1. Be sure to provide sufficient margins on your form. Otherwise, form elements which are located too close to the sides of the

form may disappear during scanning, which will result in a loss of data.

2. The space between neighboring form elements should not be less than 2 mm.

3. The space between a checkmark field and explanatory text should not be less than 2/3 of the checkmark field size.

4. Make sure that the explanatory text does not overlap entry field borders.

5. If explanatory text is printed in black ink, make sure there is a distance of at least 1.5–2 mm between the explanatory text

and the other elements. This distance is not so crucial for explanatory text printed in the same ink as the background.

ABBYY FlexiCapture

Dynamic Data Capture System

Print Quality

When you print blank forms, keep in mind the following requirements:

1. The forms must be printed either professionally or using a printer. We recommend that color forms be printed professional-

ly. If this is impossible, test the form color on a scanner before starting your print run.

2. All the copies of the form must be printed using the same source document, as the field location on each form must be iden-

tical.

3. The minimum margin size (i.e. the distance between the edge of the page and the nearest form element) should be at least 8

mm (12 mm margins are recommended).

4. The permitted linear deviation of form elements is no more than 0.15% ( i.e. 0.5 mm for an А4–size page).

5. If you print your forms using a printer, do not print them with a resolution less than 600 dpi.

6. We recommend printing the forms with the help of the same printer or different printers of the same model.

Tip. We do not recommend copying machine-readable forms with the help of copying equipment. Use of such equipment can

slightly change dimensions of elements on the form or their arrangement, for example, table or entry fields borders may become thick-

er, or color depth may change, which might be detrimental for recognition quality.

Form Completion

Pens and ink

Forms are best completed neatly, in capital letters, using a black ball–point, gel or capillary pen (dark blue and violet are also accepta-

ble). Soft–tip/felt–tip pens are not to be recommended as characters are likely to be very thick, causing recognition problems. Recog-

nition is worst in the case of forms completed by pencil or using a light ink.

Letter size and style

For best recognition results, forms should be completed in block capital letters. The letters must fill out all character cells but must not

overlap cell borders.

If character cells are visually marked on the forms (i.e. the following text marking types are used: letters in frames, letters in separate

frames), the person filling out the form will be less likely to join the letters together.

The following text marking types present greater problems for recognition: text in a frame with a comb, letters on a comb. Here only

the width of the character cell is predefined, while the absence of side borders makes joining letters together possible. In the case of

the comb without a frame, the letters can be written either too small or too large.

If text in a frame or text over a line are used, there is no evident restriction on the width of the character cells. The letters may be

joined together, which will have an adverse effect on recognition quality. In the case of text over a line there are no restrictions on

character height. Therefore this marking type is not recommended for forms requiring a high degree of recognition accuracy.

Another important requirement is that the letters do not overlap the field borders. This is not so crucial for dropout or black–and–

white raster forms, because field borders will disappear during scanning and despeckling. But if letters overlap field borders on black–

and–white linear forms, this may result in a significant decrease in recognition quality.

Sample

To encourage correct completion, we recommend including a note on your form similar to the one below.

ABBYY FlexiCapture

Dynamic Data Capture System

Recommended Colors for Dropout Forms

The table below contains dropout color samples and their corresponding Pantone numbers. These background colors disappear if

forms are scanned:

● using any scanner;

● using a color scanner with software red color filtering or using a non–color scanner with a red lamp/red filter

Abbyy Machine Readable Forms Flexi Capture 11.0 Guide To Creating 11 FCG EN

Navigation menu

Versions of this User Manual:

Views

Navigation