Adobe FrameMaker INI Reference Frame Maker 2017 Ref En

User Manual: adobe FrameMaker - 2017 - INI Reference Free User Guide for Adobe FrameMaker Software, Manual

Open the PDF directly: View PDF PDF.
Page Count: 76

DownloadAdobe FrameMaker INI Reference Frame Maker - 2017 Ref En
Open PDF In BrowserView PDF
Adobe FrameMaker INI
Reference

January 31, 2017

Contents

ditafm-output.ini . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Create ditamap-to-book output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Save ditamap as Book  with fm components . . . . . . . . . . . . . . . . 1
Configure the output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
ditafm-output.ini sections and flags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
General Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
BookWithFM-General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
BookWithFM-Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
BookWithFM-Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
BookWithFM-Subsection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
BookWithFM-TOC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
BookWithFM-Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
BookWithFM-ListofFigures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
BookWithFM-ListofTables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
BookWithFM-BookTitle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
BookWithFM-ListOfPara . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
BookWithFM-ListOfParaAlphabetical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
BookWithFM-ListofMarkers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
BookWithFM-ListofMarkersAlphabetical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
BookWithFM-ListOfReferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
BookWithFM-IndexOfAuthors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
BookWithFM-IndexOfSubjects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
BookWithFM-IndexOfMarkers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
BookWithFM-IndexOfReferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Maker.ini . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Reginfo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

i

ADOBE FRAMEMAKER (2017 RELEASE)

DropBoxPreferences . . . . . . .
Fonts . . . . . . . . . . . . . . . .
CMSFavorites . . . . . . . . . . .
Directories . . . . . . . . . . . . .
Files . . . . . . . . . . . . . . . . .
SpellingProviderPreferences . . .
HyphenationProviderPreferences
ThesaurusProviderPreferences .
DialogLayout . . . . . . . . . . .
ViewClients . . . . . . . . . . . .
XSLTProcessors . . . . . . . . . .
APIClients . . . . . . . . . . . . .
DashPatterns . . . . . . . . . . . .
Thermometers . . . . . . . . . . .
DocCompare . . . . . . . . . . . .
Spelling . . . . . . . . . . . . . . .
BannerText . . . . . . . . . . . . .
FontAngleAliases . . . . . . . . .
FontWeightAliases . . . . . . . .
WindowsToFrameFontAliases .
UnknownToKnownFontMap . .
Filters . . . . . . . . . . . . . . . .

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

. 56
. 56
. 57
. 59
. 60
. 62
. 62
. 62
. 62
. 64
. 65
. 66
. 67
. 68
. 68
. 69
. 70
. 70
. 70
. 71
. 72
. 72

Legal notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

ADOBE FRAMEMAKER (2017 RELEASE)

ii

ditafm-output.ini

1

ditafm-output.ini
Create ditamap-to-book output
You can configure the generation of the output from a ditamap. Using the ditafm-output.ini file (at
%APPDATA%\Adobe\FrameMaker\), you can configure the various options for
your output, such as:
•

Type of output to generate (book with FM components or compound FM document)

•

Templates to use for chapter, section, subsection ToC, index, and front matter in the generated
book

•

Chapter numbers, pagination, para numbers, footnotes, and table footnote numbers

Save ditamap as Book  with fm components
You configure the output using the ditafm-output.ini file at
%APPDATA%\Adobe\FrameMaker\.
Once you have set the configuration in ditafm-output.ini file, with a ditamap in focus, do the
following:
•

Select File > Save Ditamap As.

•

In the Save Document, select Book  with fm components.

•

Click Save.
FrameMaker generates a book from the ditamap in focus.

Configure the output
The main options in the ditafm-output.ini file are:

Option

1

When set to 0

When set to 1

GenerateFlatBook

Creates a nested book from a ditamap
retaining its structure, hierarchy, and levels.

Creates a flat book from a ditamap, where
All topicrefs are flattened at the chapter level.

SavePDFViaBookR
oute

Generates a compound .fm document and
then a PDF

Generates a book and then PDF. Use this
option if you need book components, such
as index, ToC, and FrontMatter.

ditafm-output.ini

Option

When set to 0

When set to 1

MapTableTitletoF
MTableTitle

Does not repeat title of table when a table
continues across multiple pages

Repeats title of table for multiple pages when
the table breaks across multiple pages

MoveFigureTitleTo
FollowImage

The figure titles appear in the output book as
they are in the ditamap.

Moves the figure title to below the image in
the generated file. (In DITA, by default the
figure titles are placed above the images).

The section ditafm-output.ini sections and flags includes details of all the flags in the
ditafm-output.ini file.

ditafm-output.ini sections and flags
General Options
SavePDFViaBookRoute
When set to 0, generates a compound .fm document and then a PDF
When set to 1, generates a book and then a PDF. Use this option when you need book components, such as index, ToC, and title page, in your output.
TemplateDir
The directory where FrameMaker locates all the template files, such as for Chapter, section,
ToC, Index, for generating the output.
RemovePrologInOutput - DL Element
0 retains the prolog element in the output.
1 removes the prolog element from the output. The prolog element is in the beginning of DITA
files and includes metadata, such as Author and Copyright.
MapTableTitleToFMTableTitle
0 does not map the Dita  element to the FrameMaker table title.
1 maps the Dita table title to FrameMaker table title in the output. If the table spans multiple
pages, the table title repeats for each page. The format of the table title for continued pages is
Table <table number>: <table title> (Continued) (Sheet x of y). Further, the table title can be
controlled with the following flags: AddVariablesToTableTitle and TableTitleFormatting.
AddVariablesToTableTitle
Add the value Continuation or Sheet. Or add both delimited by pipeline (Continuation|Sheet).
Continuation adds (Continued) in the table title when table spans multiple pages.
Sheet displays (Sheet x of y) if the table spans multiple pages.
2

ditafm-output.ini

1

TableTitleFormatting
When set to FromTableFormat, the table title takes it formatting from the relevant table
format.
When set to FromTitleElementFormat, the table title takes it formatting from the title element
format in the EDD.
MoveFigureTitleToFollowImage
0 keeps the image title above the image.
1 keeps the image title below the image.
CompositeDocTemplate_1.1
The name of the composite document template for DITA 1.1. The directory is set in the
TemplateDir flag.
The composite document template is used when creating a composite doc from ditamap or a
flat book from ditamap.
CompositeDocTemplate_1.2
The name of the composite document template for DITA 1.2. The directory is set in the
TemplateDir flag.
The composite document template is used when creating a composite doc from ditamap or a
flat book from ditamap.
DropBannerText
0 retains banner text in the output.
1 drops the banner text in the output.
For more information on banner text, see FrameMaker Help.

BookWithFM-General
PerformPostProcessing
Post processing includes all the processing of the book file output according to the
ditafm-output.ini, such as:
•

Applying templates for title and chapter pages

•

Adding indexes, tables, and lists

•

Applying page numbers across the book

•

Managing pagination

•

Creating title pages for folder/main book/child book.

When set to 0, FrameMaker does not perform post processing.
3

ditafm-output.ini
When set to 1, FrameMaker performs post processing.
GenerateFMComponentsAtOneLoc
0 generates the book components at the location of the relevant input DITA files.
1 generates the book components at a single location where the book is saved.
GenerateFlatBook
0 generates a nested book from a ditamap retaining its structure, hierarchy, and levels.
1 generates a flatbook from a ditamap, where all topicrefs are flattened at the chapter level.
GenerateTOC
0 does not generate a ToC in the output.
1 generates a ToC in the output.
GenerateIndex
0 does not generate an index in the output.
1 generates an index in the output.
GenerateIndexOfAuthors
0 does not generate an index of authors in the output.
1 generates an index of authors in the output. The author names are picked up according to the
Author marker type.
To generate an index of authors specify the following also:

Section
[BookWithFM-IndexOfAuthors]

Flag
Template
MarkerTags

GenerateIndexOfSubjects
0 does not generate an index of subjects in the output.
1 generates an index of subjects in the output. The index is created with the marker entries of
type Subject.
To generate an index of subjects, specify the following also:

4

ditafm-output.ini

1

Section
[BookWithFM-IndexOfSubjects]

Flag
Template
MarkerTags

GenerateIndexOfMarkers
0 does not generate an index of markers in the output.
1 generates an index of markers of type Index.
To generate an index of subjects, specify the following also:

Section
[BookWithFM-IndexOfMarkers]

Flag
Template
MarkerTags

GenerateIndexOfReferences
0 does not generate an index of references in the output.
1 generates an index of references, such as an index of fonts, in the output. The references can
be of different types, such as imported graphics, fonts, text insets, unresolved cross references.
To generate an index of subjects, specify the following also:

Section
[BookWithFM-IndexOfReferences]

Flag
Template
References

GenerateListofFigures
0 does not generate a list of figures in the output.
1 generates a list of figures in the output.
To generate a list of figures, specify the following also:

5

ditafm-output.ini

Section
[BookWithFM-ListofFigures]

Flag
Template
ElementTags
ParaTags

GenerateListofTables
0 does not generate a list of tables in the output.
1 generates a list of tables in the output.
To generate a list of tables, specify the following also:

Section
[BookWithFM-ListofTables]

Flag
Template
ElementTags
ParaTags

GenerateListOfPara
0 does not generate a list of para in the output.
1 generates a list of paras used in the output.
To generate a list of para, also specify the template in the Template flag in the [BookWithFM-ListOfPara] section.
GenerateListOfParaAlphabetical
0 does not generate an alphabetical list of paras.
1 generates an alphabetical list of paras in the output.
Also, specify a template in the Template flag in the [BookWithFM-ListOfParaAlphabetical]
section.
GenerateListOfMarkers
0 does not generate a list of markers in the output.
1 generates a list of markers in the output.
The marker types to include in the list are specified in the Template flag in the [BookWithFM-ListOfMarkers] section.

6

ditafm-output.ini

1

GenerateListOfMarkersAlphabetical
0 does not generate an alphabetical list of markers in the output.
1 generates an alphabetical list of markers in the output. Also, specify a template in the
Template flag in the [BookWithFM-ListOfMarkersAlphabetical] section.
The marker types to include in the list are specified in the MarkerTags flag in the [BookWithFM-ListOfMarkersAlphabetical] section.
GenerateListOfReferences
0 does not generate a list of references in the output.
1 generates a list of references, such as list of fonts or unresolved cross references, in the output.
Also, specify a template in the Template flag in the [BookWithFM-ListOfReferences] section.
The references to include are specified using the References flag under the [BookWithFM-ListOfReferences] section.
GenerateBookTitlePage
0 does not generate a book title page in the output.
1 generates a book title page in the output.
GenerateChildBookTitlePage
0 does not generate title pages for child books in the output.
1 generates title pages for child books in the output.
GenerateFolderTitlePage
In case topichead element is used to create hierarchy in your ditamap, set this flag as 1 to create
title pages as templates for folders.
ApplyOutputTemplate
1 applies the following output templates in the folder specified as TemplateDir to the output:
•

Chapter

•

Section

•

subsection

This flag does not affect the generated book components such as ToC, Index, and title pages.
OutputFilesOrder
Specify the order of the files in the output. Use the following values delimited with pipelines to
specify the order: BookTitle|TOC|Files|ListofFigures|ListofTables|Index.
TemplateImportFlags
Specify which all formats you want to import from the publishing template. Use one or more
of the following values delimited by pipelines (the order is irrelevant):
PGF|FONT|PAGE|TABLE|COND|REFPAGE|VAR|XREF|COLOR|MATH|DOCUMENT_PRO
7

ditafm-output.ini
PS|COMBINED_FONTS|FBA|STYLE|REMOVE_PAGE_BREAKS|REMOVE_EXCEPTIONS.
To import everything in the template, set the flag to ALL.

BookWithFM-Chapter
Template
Name of the chapter template FrameMaker uses for generating the output.
TitleTemplate
Name of the template used as title page for child book\folder title at chapter level.
ChapterNumberingFirst
Set the chapter numbering flag using one of the following values:
•

Restart: Restart chapter numbering from 1.

•

Continue: Continue from previous chapter file.

•

ReadFromFile: Use the numbering value specified in the associated document.

•

UseSame: Use same as the previous chapter.

ChapterNumberingFirstValue
Specify a number to hardcode the first chapter’s number. Default value is 1.
ChapterNumberingFirstText
Specify the text to apply to the first chapter if not a number.
ChapterNumberingDefault
Set the default chapter (apart from first chapter) numbering flag using one of the following
values:
•

Restart: Restart chapter numbering from 1.

•

Continue: Continue from previous chapter file.

•

ReadFromFile: Use the numbering value specified in the associated document.

•

UseSame: Use same as the previous chapter.

ChapterNumberingDefaultValue
If you have specified ChapterNumberingFirst as Restart, specify a value for the default chapter
numbering.
ChapterNumberingDefaultText
If you have specified ChapterNumberingFirst as Restart, specify a text value for the default
chapter numbering.

8

ditafm-output.ini

1

ChapterNumberingFormat
Choose one of the following as the chapter numbering format:
•

Numeric

•

Roman_UC

•

Roman_LC

•

Alpha_UC

•

Alpha_LC

•

Kanji

•

Zenkaku

•

Zenkaku_UC

•

Zenkaku_LC

•

Kanji_Kazu

•

Daiji

•

Text

•

FullWidth

•

FullWidth_UC

•

FullWidth_LC

•

Chinese_Numeric

PageNumberingFirst
For the first chapter, set the page numbering flag using one of the following values:
•

Restart: Restart page numbering from 1.

•

Continue: Continue from previous page.

•

ReadFromFile: Use the numbering value specified in the associated document.

•

UseSame: Use same as the previous page.

PageNumberingFirstValue
Specify a number to hardcode the first page number for the first chapter in the book output.
PageNumberingDefault
For page numbers apart from the first chapter, set the default page numbering flag using one
of the following values:
•

9

Restart: Restart page numbering from 1.

ditafm-output.ini
•

Continue: Continue from previous page file.

•

ReadFromFile: Use the numbering value specified in the associated document.

PageNumberingDefaultValue
Enter a default value in this field.
PageNumberingFormat
Choose one of the following as the page numbering format:
•

Numeric

•

Roman_UC

•

Roman_LC

•

Alpha_UC

•

Alpha_LC

•

Kanji

•

Zenkaku

•

Zenkaku_UC

•

Zenkaku_LC

•

Kanji_Kazu

•

Daiji

•

FullWidth

•

FullWidth_UC

•

FullWidth_LC

•

Chinese_Numeric

Pagination
Specify the pagination of the chapter as one of the following:
•

DoubleSided

•

SingleSided

If you have selected the pagination as double sided, also set the FirstPageSide flag.
PageRounding
Set the page rounding flag as one of the following:
•

MakeEven: FrameMaker makes the number of pages in a chapter even, if not already even, by
inserting a blank page in the end.

10

ditafm-output.ini
•

MakeOdd: FrameMaker makes the number of pages in a chapter odd, if not already odd, by
inserting a blank page in the end.

•

DontChange: FrameMaker does not change the number of pages in a chapter.

•

DeleteEmpty: FrameMaker deletes the empty pages in the end of the chapter files.

1

FirstPageSide
Use one of the following options to set the first page of the chapter file:
•

Restart: Restart page numbering from 1.

•

Continue: Continue from previous page.

•

ReadFromFile: Use the numbering value specified in the associated document.

•

UseSame: Use same as the previous page.

ParaNumberingFirst
Specify the paragraph numbering for the first paras in the list in the template as one of the
following:
•

Restart: Restart paragraph numbering from 1.

•

Continue: Continue from previous paragraph.

•

ReadFromFile: Use the numbering value specified in the associated template.

ParaNumberingDefault
Specify the paragraph numbering for the paras, apart from the first ones, in the list in the
template as one of the following:
•

Restart: Restart paragraph numbering from 1.

•

Continue: Continue from previous paragraph.

•

ReadFromFile: Use the numbering value specified in the associated template.

FootnoteNumberingFirst
Set the footnote numbering flag for the first chapter using one of the following values:

11

•

Restart: Restart footnote numbering from 1 for each page. When you have set this value,
specify FootnoteNumberingFirstValue also.

•

PerPage: For each page in the book, FrameMaker restarts the footnote numbering from 1.

•

Continue: Continue from previous page within a chapter file.

•

ReadFromFile: Use the numbering properties specified in the associated chapter document.

ditafm-output.ini
FootnoteNumberingFirstValue
If you have specified FootnoteNumberingFirst as Restart, specify a number for the first footnote in the first chapter. Default value is 1.
FootNoteNumberingFirstCustom
Specify a custom value for the footnote numbering for the first chapter.
FootnoteNumberingDefault
Set the footnote numbering flag for the second and subsequent chapters using one of the
following values:
•

Restart: Restart footnote numbering from 1 for each page. When you have set this value,
specify FootnoteNumberingFirstValue also.

•

PerPage: For each page in the book, FrameMaker restarts the footnote numbering from 1.

•

Continue: Continue from previous page within a chapter file.

•

ReadFromFile: Use the numbering properties specified in the associated chapter document.

FootnoteNumberingDefaultValue
If you have specified FootnoteNumberingDefault as Restart, specify a number for the first footnote in the second and subsequent chapters. Default value is 1.
FootNoteNumberingDefaultCustom
Specify a custom value for the footnote numbering for the second and subsequent chapters in
the book.
FootnoteNumberingFormat
Choose one of the following as the footnote numbering format for all the chapters in the book:
•

Numeric

•

Roman_UC

•

Roman_LC

•

Alpha_UC

•

Alpha_LC

•

Kanji

•

Zenkaku

•

Zenkaku_UC

•

Zenkaku_LC

•

Kanji_Kazu

•

Daiji
12

ditafm-output.ini
•

FullWidth

•

FullWidth_UC

•

FullWidth_LC

•

Chinese_Numeric

•

Custom (When you use this value, also set the FootNoteNumberingFirstCustom and
FootNoteNumberingDefaultCustom flags.

1

TableFootnoteNumberingFirst
Set the table footnote numbering flag for the first chapter using one of the following values:
•

Restart: Restart table footnote numbering for the first chapter.

•

ReadFromFile: Use the table footnote numbering properties specified in the associated
chapter document.

TableFootnoteNumberFirstCustom
Specify a custom value for the table footnote numbering for the first chapter.
TableFootnoteNumberDefault
Set the table footnote numbering flag for the second and subsequent chapters using one of the
following values:
•

Restart: Restart table footnote numbering for the chapter.

•

ReadFromFile: Use the table footnote numbering properties specified in the associated
chapter document.

TableFootnoteNumberDefaultCustom
Specify a custom value for the footnote numbering for the second and subsequent chapters in
the book.
TableFootnoteNumberingFormat
Choose one of the following as the table footnote numbering format for all the chapters in the
book:

13

•

Numeric

•

Roman_UC

•

Roman_LC

•

Alpha_UC

•

Alpha_LC

•

Kanji

•

Zenkaku

ditafm-output.ini
•

Zenkaku_UC

•

Zenkaku_LC

•

Kanji_Kazu

•

Daiji

•

FullWidth

•

FullWidth_UC

•

FullWidth_LC

•

Chinese_Numeric

•

Custom (When you use this value, also set the TableFootnoteNumberFirstCustom and
TableFootnoteNumberDefaultCustom flags.

BookWithFM-Section
Template
Name of the template FrameMaker uses for generating the section.
TitleTemplate
Name of the template used as title page for child book\folder title at section level.
SectionNumberingFirst
Set the section numbering flag using one of the following values:
•

Restart: Restart section numbering from 1.

•

Continue: Continue from previous section.

•

ReadFromFile: Use the numbering value specified in the associated document.

•

UseSame: Use same as the previous section.

SectionNumberingFirstValue
Specify a number to hardcode the first section’s number. Default value is 1.
SectionNumberingFirstText
Specify the text to apply to the first section if not a number.
SectionNumberingDefault
Set the default section (apart from first section) numbering flag using one of the following
values:
•

Restart: Restart section numbering from 1.

•

Continue: Continue from previous section file.

14

ditafm-output.ini
•

ReadFromFile: Use the numbering value specified in the associated document.

•

UseSame: Use same as the previous section.

1

SectionNumberingDefaultValue
If you have specified SectionNumberingFirst as Restart, specify a value for the default section
numbering.
SectionNumberingDefaultText
If you have specified SectionNumberingFirst as Restart, specify a text value for the default
section numbering.
SectionNumberingFormat
Choose one of the following as the section numbering format:
•

Numeric

•

Roman_UC

•

Roman_LC

•

Alpha_UC

•

Alpha_LC

•

Kanji

•

Zenkaku

•

Zenkaku_UC

•

Zenkaku_LC

•

Kanji_Kazu

•

Daiji

•

Text

•

FullWidth

•

FullWidth_UC

•

FullWidth_LC

•

Chinese_Numeric

PageNumberingFirst
For the first section, set the page numbering flag using one of the following values:

15

•

Restart: Restart page numbering from 1.

•

Continue: Continue from previous page.

•

ReadFromFile: Use the numbering value specified in the associated document.

ditafm-output.ini
•

UseSame: Use same as the previous page.

PageNumberingFirstValue
Specify a number to hardcode the first page number for the first section in the book output.
PageNumberingDefault
For page numbers apart from the first section, set the default page numbering flag using one of
the following values:
•

Restart: Restart page numbering from 1.

•

Continue: Continue from previous page file.

•

ReadFromFile: Use the numbering value specified in the associated document.

PageNumberingDefaultValue
Enter a default value in this field.
PageNumberingFormat
Choose one of the following as the page numbering format:
•

Numeric

•

Roman_UC

•

Roman_LC

•

Alpha_UC

•

Alpha_LC

•

Kanji

•

Zenkaku

•

Zenkaku_UC

•

Zenkaku_LC

•

Kanji_Kazu

•

Daiji

•

FullWidth

•

FullWidth_UC

•

FullWidth_LC

•

Chinese_Numeric

Pagination
Specify the pagination of the section as one of the following:
•

DoubleSided
16

ditafm-output.ini
•

1

SingleSided

If you have selected the pagination as double sided, also set the FirstPageSide flag.
PageRounding
Set the page rounding flag as one of the following:
•

MakeEven: FrameMaker makes the number of pages in a section even, if not already even, by
inserting a blank page in the end.

•

MakeOdd: FrameMaker makes the number of pages in a section odd, if not already odd, by
inserting a blank page in the end.

•

DontChange: FrameMaker does not change the number of pages in a section.

•

DeleteEmpty: FrameMaker deletes the empty pages in the end of the section files.

FirstPageSide
Use one of the following options to set the first page of the section file:
•

Restart: Restart page numbering from 1.

•

Continue: Continue from previous page.

•

ReadFromFile: Use the numbering value specified in the associated document.

•

UseSame: Use same as the previous page.

ParaNumberingFirst
Specify the paragraph numbering for the first paras in the list in the template as one of the
following:
•

Restart: Restart paragraph numbering from 1.

•

Continue: Continue from previous paragraph.

•

ReadFromFile: Use the numbering value specified in the associated template.

ParaNumberingDefault
Specify the paragraph numbering for the paras, apart from the first ones, in the list in the
template as one of the following:
•

Restart: Restart paragraph numbering from 1.

•

Continue: Continue from previous paragraph.

•

ReadFromFile: Use the numbering value specified in the associated template.

FootnoteNumberingFirst
Set the footnote numbering flag for the first section using one of the following values:
•

17

Restart: Restart footnote numbering from 1 for each page. When you have set this value,
specify FootnoteNumberingFirstValue also.

ditafm-output.ini
•

PerPage: For each page in the book, FrameMaker restarts the footnote numbering from 1.

•

Continue: Continue from previous page within a section file.

•

ReadFromFile: Use the numbering properties specified in the associated section document.

FootnoteNumberingFirstValue
If you have specified FootnoteNumberingFirst as Restart, specify a number for the first footnote in the first section. Default value is 1.
FootNoteNumberingFirstCustom
Specify a custom value for the footnote numbering for the first section.
FootnoteNumberingDefault
Set the footnote numbering flag for the second and subsequent sections using one of the
following values:
•

Restart: Restart footnote numbering from 1 for each page. When you have set this value,
specify FootnoteNumberingFirstValue also.

•

PerPage: For each page in the book, FrameMaker restarts the footnote numbering from 1.

•

Continue: Continue from previous page within a section file.

•

ReadFromFile: Use the numbering properties specified in the associated section document.

FootnoteNumberingDefaultValue
If you have specified FootnoteNumberingDefault as Restart, specify a number for the first footnote in the second and subsequent sections. Default value is 1.
FootNoteNumberingDefaultCustom
Specify a custom value for the footnote numbering for the second and subsequent sections in
the book.
FootnoteNumberingFormat
Choose one of the following as the footnote numbering format for all the sections in the book:
•

Numeric

•

Roman_UC

•

Roman_LC

•

Alpha_UC

•

Alpha_LC

•

Kanji

•

Zenkaku

18

ditafm-output.ini
•

Zenkaku_UC

•

Zenkaku_LC

•

Kanji_Kazu

•

Daiji

•

FullWidth

•

FullWidth_UC

•

FullWidth_LC

•

Chinese_Numeric

•

Custom (When you use this value, also set the FootNoteNumberingFirstCustom and
FootNoteNumberingDefaultCustom flags.

1

TableFootnoteNumberingFirst
Set the table footnote numbering flag for the first section using one of the following values:
•

Restart: Restart table footnote numbering for the first section.

•

ReadFromFile: Use the table footnote numbering properties specified in the associated
section document.

TableFootnoteNumberFirstCustom
Specify a custom value for the table footnote numbering for the first section.
TableFootnoteNumberDefault
Set the table footnote numbering flag for the second and subsequent sections using one of the
following values:
•

Restart: Restart table footnote numbering for the section.

•

ReadFromFile: Use the table footnote numbering properties specified in the associated
section document.

TableFootnoteNumberDefaultCustom
Specify a custom value for the footnote numbering for the second and subsequent sections in
the book.
TableFootnoteNumberingFormat
Choose one of the following as the table footnote numbering format for all the sections in the
book:

19

•

Numeric

•

Roman_UC

•

Roman_LC

ditafm-output.ini
•

Alpha_UC

•

Alpha_LC

•

Kanji

•

Zenkaku

•

Zenkaku_UC

•

Zenkaku_LC

•

Kanji_Kazu

•

Daiji

•

FullWidth

•

FullWidth_UC

•

FullWidth_LC

•

Chinese_Numeric

•

Custom (When you use this value, also set the TableFootnoteNumberFirstCustom and
TableFootnoteNumberDefaultCustom flags.

BookWithFM-Subsection
Template
Name of the template FrameMaker uses for generating the subsection.
TitleTemplate
Name of the template used as title page for child book\folder title at subsection level.
SubsectionNumberingFirst
Set the subsection numbering flag using one of the following values:
•

Restart: Restart subsection numbering from 1.

•

Continue: Continue from previous subsection.

•

ReadFromFile: Use the numbering value specified in the associated document.

•

UseSame: Use same as the previous subsection.

SubsectionNumberingFirstValue
Specify a number to hardcode the first subsection’s number. Default value is 1.
SubsectionNumberingFirstText
Specify the text to apply to the first subsection if not a number.

20

ditafm-output.ini

1

SubsectionNumberingDefault
Set the default subsection (apart from first subsection) numbering flag using one of the
following values:
•

Restart: Restart subsection numbering from 1.

•

Continue: Continue from previous subsection file.

•

ReadFromFile: Use the numbering value specified in the associated document.

•

UseSame: Use same as the previous subsection.

SubsectionNumberingDefaultValue
If you have specified SubsectionNumberingFirst as Restart, specify a value for the default
subsection numbering.
SubsectionNumberingDefaultText
If you have specified SubsectionNumberingFirst as Restart, specify a text value for the default
subsection numbering.
SubsectionNumberingFormat
Choose one of the following as the subsection numbering format:

21

•

Numeric

•

Roman_UC

•

Roman_LC

•

Alpha_UC

•

Alpha_LC

•

Kanji

•

Zenkaku

•

Zenkaku_UC

•

Zenkaku_LC

•

Kanji_Kazu

•

Daiji

•

Text

•

FullWidth

•

FullWidth_UC

•

FullWidth_LC

•

Chinese_Numeric

ditafm-output.ini
PageNumberingFirst
For the first subsection, set the page numbering flag using one of the following values:
•

Restart: Restart page numbering from 1.

•

Continue: Continue from previous page.

•

ReadFromFile: Use the numbering value specified in the associated document.

•

UseSame: Use same as the previous page.

PageNumberingFirstValue
Specify a number to hardcode the first page number for the first subsection in the book output.
PageNumberingDefault
For page numbers apart from the first subsection, set the default page numbering flag using
one of the following values:
•

Restart: Restart page numbering from 1.

•

Continue: Continue from previous page file.

•

ReadFromFile: Use the numbering value specified in the associated document.

PageNumberingDefaultValue
Enter a default value in this field.
PageNumberingFormat
Choose one of the following as the page numbering format:
•

Numeric

•

Roman_UC

•

Roman_LC

•

Alpha_UC

•

Alpha_LC

•

Kanji

•

Zenkaku

•

Zenkaku_UC

•

Zenkaku_LC

•

Kanji_Kazu

•

Daiji

•

FullWidth

•

FullWidth_UC
22

ditafm-output.ini
•

FullWidth_LC

•

Chinese_Numeric

1

Pagination
Specify the pagination of the subsection as one of the following:
•

DoubleSided

•

SingleSided

If you have selected the pagination as double sided, also set the FirstPageSide flag.
PageRounding
Set the page rounding flag as one of the following:
•

MakeEven: FrameMaker makes the number of pages in a subsection even, if not already even,
by inserting a blank page in the end.

•

MakeOdd: FrameMaker makes the number of pages in a subsection odd, if not already odd, by
inserting a blank page in the end.

•

DontChange: FrameMaker does not change the number of pages in a subsection.

•

DeleteEmpty: FrameMaker deletes the empty pages in the end of the subsection files.

FirstPageSide
Use one of the following options to set the first page of the subsection file:
•

Restart: Restart page numbering from 1.

•

Continue: Continue from previous page.

•

ReadFromFile: Use the numbering value specified in the associated document.

•

UseSame: Use same as the previous page.

ParaNumberingFirst
Specify the paragraph numbering for the first paras in the list in the template as one of the
following:
•

Restart: Restart paragraph numbering from 1.

•

Continue: Continue from previous paragraph.

•

ReadFromFile: Use the numbering value specified in the associated template.

ParaNumberingDefault
Specify the paragraph numbering for the paras, apart from the first ones, in the list in the
template as one of the following:

23

•

Restart: Restart paragraph numbering from 1.

•

Continue: Continue from previous paragraph.

ditafm-output.ini
•

ReadFromFile: Use the numbering value specified in the associated template.

FootnoteNumberingFirst
Set the footnote numbering flag for the first subsection using one of the following values:
•

Restart: Restart footnote numbering from 1 for each page. When you have set this value,
specify FootnoteNumberingFirstValue also.

•

PerPage: For each page in the book, FrameMaker restarts the footnote numbering from 1.

•

Continue: Continue from previous page within a subsection file.

•

ReadFromFile: Use the numbering properties specified in the associated subsection
document.

FootnoteNumberingFirstValue
If you have specified FootnoteNumberingFirst as Restart, specify a number for the first footnote in the first subsection. Default value is 1.
FootNoteNumberingFirstCustom
Specify a custom value for the footnote numbering for the first subsection.
FootnoteNumberingDefault
Set the footnote numbering flag for the second and subsequent subsections using one of the
following values:
•

Restart: Restart footnote numbering from 1 for each page. When you have set this value,
specify FootnoteNumberingFirstValue also.

•

PerPage: For each page in the book, FrameMaker restarts the footnote numbering from 1.

•

Continue: Continue from previous page within a subsection file.

•

ReadFromFile: Use the numbering properties specified in the associated subsection
document.

FootnoteNumberingDefaultValue
If you have specified FootnoteNumberingDefault as Restart, specify a number for the first footnote in the second and subsequent subsections. Default value is 1.
FootNoteNumberingDefaultCustom
Specify a custom value for the footnote numbering for the second and subsequent subsections
in the book.
FootnoteNumberingFormat
Choose one of the following as the footnote numbering format for all the subsections in the
book:
•

Numeric

•

Roman_UC
24

ditafm-output.ini
•

Roman_LC

•

Alpha_UC

•

Alpha_LC

•

Kanji

•

Zenkaku

•

Zenkaku_UC

•

Zenkaku_LC

•

Kanji_Kazu

•

Daiji

•

FullWidth

•

FullWidth_UC

•

FullWidth_LC

•

Chinese_Numeric

•

Custom (When you use this value, also set the TableFootnoteNumberFirstCustom and
TableFootnoteNumberDefaultCustom flags.

1

TableFootnoteNumberingFirst
Set the table footnote numbering flag for the first subsection using one of the following values:
•

Restart: Restart table footnote numbering for the first subsection.

•

ReadFromFile: Use the table footnote numbering properties specified in the associated
subsection document.

TableFootnoteNumberFirstCustom
Specify a custom value for the table footnote numbering for the first subsection.
TableFootnoteNumberDefault
Set the table footnote numbering flag for the second and subsequent subsections using one of
the following values:
•

Restart: Restart table footnote numbering for the subsection.

•

ReadFromFile: Use the table footnote numbering properties specified in the associated
subsection document.

TableFootnoteNumberDefaultCustom
Specify a custom value for the footnote numbering for the second and subsequent subsections
in the book.

25

ditafm-output.ini
TableFootnoteNumberingFormat
Choose one of the following as the table footnote numbering format for all the subsections in
the book:
•

Numeric

•

Roman_UC

•

Roman_LC

•

Alpha_UC

•

Alpha_LC

•

Kanji

•

Zenkaku

•

Zenkaku_UC

•

Zenkaku_LC

•

Kanji_Kazu

•

Daiji

•

FullWidth

•

FullWidth_UC

•

FullWidth_LC

•

Chinese_Numeric

•

Custom (When you use this value, also set the TableFootnoteNumberFirstCustom and
TableFootnoteNumberDefaultCustom flags.

BookWithFM-TOC
Template
Name of the template FrameMaker uses for generating the ToC in the output.
ElementTags
Specify the element tags to include in the ToC. Delimit multiple elements tags with pipelines.
ParaTags
Specify the paragraph tags to include in the ToC. Delimit multiple paragraph tags with pipelines.
PageNumbering
Set the page numbering flag for the ToC file using one of the following values:

26

ditafm-output.ini
•

Restart: Restart page numbering from 1.

•

Continue: Continue from previous file.

•

ReadFromFile: Use the numbering value specified in the associated document.

1

PageNumberingValue
If you have specified PageNumbering as Restart, specify a number to hardcode the first page’s
number. Default value is 1.
PageNumberingFormat
Choose one of the following as the ToC page numbering format:
•

Numeric

•

Roman_UC

•

Roman_LC

•

Alpha_UC

•

Alpha_LC

•

Kanji

•

Zenkaku

•

Zenkaku_UC

•

Zenkaku_LC

•

Kanji_Kazu

•

Daiji

•

FullWidth

•

FullWidth_UC

•

FullWidth_LC

•

Chinese_Numeric

Pagination
Specify the pagination of the ToC as:
•

DoubleSided

•

SingleSided

If you have selected the pagination as double sided, also set the FirstPageSide flag.
PageRounding
Set the page rounding flag as one of the following:

27

ditafm-output.ini
•

MakeEven: FrameMaker makes the number of pages in the ToC even, if not already even, by
inserting a blank page in the end.

•

MakeOdd: FrameMaker makes the number of pages in the ToC odd, if not already odd, by
inserting a blank page in the end.

•

DontChange: FrameMaker does not change the number of pages in the ToC.

•

DeleteEmpty: FrameMaker deletes the empty pages in the end of the ToC.

FirstPageSide
Use one of the following options to set the first page of the ToC file:
•

ReadFromFile: Use the page side in the associated document.

•

NextAvailable: Starts the ToC with a left page if the previous page in the book was a right
one. Or starts the ToC with a right page if the previous page in the book was a left one.

•

Left: Use this value to start ToC with a left page.

•

Right: Use this value to start ToC with a right page.

ParaNumbering
Specify the paragraph numbering for the headings in the ToC:
•

Restart: Restart paragraph numbering from 1.

•

Continue: Continue from previous paragraph.

•

ReadFromFile: Use the numbering value specified in the associated template.

FootnoteNumbering
Set the footnote numbering flag using one of the following values:
•

Restart: Restart footnote numbering from 1.

•

PerPage: For each page in the ToC, FrameMaker restarts the footnote numbering from 1.

•

Continue: Continue from previous page within the file.

•

ReadFromFile: Use the numbering properties specified in the associated document.

FootnoteNumberingValue
If you have specified FootnoteNumbering as Restart, specify a number for the first footnote in
the first chapter. Default value is 1.
FootNoteNumberingCustom
Specify a custom value for the footnote numbering for the ToC.
FootnoteNumberingFormat
Choose one of the following as the footnote numbering format for all the file:
•

Numeric
28

ditafm-output.ini
•

Roman_UC

•

Roman_LC

•

Alpha_UC

•

Alpha_LC

•

Kanji

•

Zenkaku

•

Zenkaku_UC

•

Zenkaku_LC

•

Kanji_Kazu

•

Daiji

•

FullWidth

•

FullWidth_UC

•

FullWidth_LC

•

Chinese_Numeric

•

Custom

TableFootnoteNumbering
Set the table footnote numbering flag for the file:
•

Restart: Restart table footnote numbering for the ToC.

•

ReadFromFile: Use the table footnote numbering properties specified in the associated
file.

TableFootNoteNumberingCustom
Specify a custom value for the table footnote numbering for the ToC.
TableFootnoteNumberingFormat
Choose one of the following as the table footnote numbering format for all the file:

29

•

Numeric

•

Roman_UC

•

Roman_LC

•

Alpha_UC

•

Alpha_LC

•

Kanji

1

ditafm-output.ini
•

Zenkaku

•

Zenkaku_UC

•

Zenkaku_LC

•

Kanji_Kazu

•

Daiji

•

FullWidth

•

FullWidth_UC

•

FullWidth_LC

•

Chinese_Numeric

•

Custom

BookWithFM-Index
Template
Name of the template FrameMaker uses for generating the Index in the output.
MarkerTags
Specify the marker tags to include in the index. Delimit multiple marker tags with pipelines.
Default marker tag type to include is Index.
PageNumbering
Set the page numbering flag for the index file using one of the following values:
•

Restart: Restart page numbering from 1.

•

Continue: Continue from previous file.

•

ReadFromFile: Use the numbering value specified in the associated document.

PageNumberingValue
If you have specified PageNumbering as Restart, specify a number to hardcode the first page’s
number. Default value is 1.
PageNumberingFormat
Choose one of the following as the index page numbering format:
•

Numeric

•

Roman_UC

•

Roman_LC

•

Alpha_UC
30

ditafm-output.ini
•

Alpha_LC

•

Kanji

•

Zenkaku

•

Zenkaku_UC

•

Zenkaku_LC

•

Kanji_Kazu

•

Daiji

•

FullWidth

•

FullWidth_UC

•

FullWidth_LC

•

Chinese_Numeric

1

Pagination
Specify the pagination of the index as:
•

DoubleSided

•

SingleSided

If you have selected the pagination as double sided, also set the FirstPageSide flag.
PageRounding
Set the page rounding flag as one of the following:
•

MakeEven: FrameMaker makes the number of pages in the index even, if not already even, by
inserting a blank page in the end.

•

MakeOdd: FrameMaker makes the number of pages in the index odd, if not already odd, by
inserting a blank page in the end.

•

DontChange: FrameMaker does not change the number of pages in the index.

•

DeleteEmpty: FrameMaker deletes the empty pages in the end of the index.

FirstPageSide
Use one of the following options to set the first page of the index file:

31

•

ReadFromFile: Use the page side in the associated document.

•

NextAvailable: Starts the index with a left page if the previous page in the book was a right
one or starts the index with a right page if the previous page in the book was a left one.

•

Left: Use this value to start index with a left page.

•

Right: Use this value to start index with a right page.

ditafm-output.ini

BookWithFM-ListofFigures
Template
Name of the template FrameMaker uses for generating ListofFigures in the output.
ElementTags
Specify the element tags to include in the ListofFigures. Delimit multiple elements tags with
pipelines.
ParaTags
Specify the para tags to include in the ListofFigures. Delimit multiple marker tags with pipelines. Default marker tag type to include is figure.title.
PageNumbering
Set the page numbering flag for the ListofFigures file using one of the following values:
•

Restart: Restart page numbering from 1.

•

Continue: Continue from previous file.

•

ReadFromFile: Use the numbering value specified in the associated document.

PageNumberingValue
If you have specified PageNumbering as Restart, specify a number to hardcode the first page’s
number. Default value is 1.
PageNumberingFormat
Choose one of the following as the ListofFigures page numbering format:
•

Numeric

•

Roman_UC

•

Roman_LC

•

Alpha_UC

•

Alpha_LC

•

Kanji

•

Zenkaku

•

Zenkaku_UC

•

Zenkaku_LC

•

Kanji_Kazu

•

Daiji

•

FullWidth

32

ditafm-output.ini
•

FullWidth_UC

•

FullWidth_LC

•

Chinese_Numeric

1

Pagination
Specify the pagination of the ListofFigures as:
•

DoubleSided

•

SingleSided

If you have selected the pagination as double sided, also set the FirstPageSide flag.
PageRounding
Set the page rounding flag as one of the following:
•

MakeEven: FrameMaker makes the number of pages in the ListofFigures even, if not already
even, by inserting a blank page in the end.

•

MakeOdd: FrameMaker makes the number of pages in the ListofFigures odd, if not already
odd, by inserting a blank page in the end.

•

DontChange: FrameMaker does not change the number of pages in the ListofFigures.

•

DeleteEmpty: FrameMaker deletes the empty pages in the end of the ListofFigures.

FirstPageSide
Use one of the following options to set the first page of the ListofFigures file:
•

ReadFromFile: Use the page side in the associated document.

•

NextAvailable: Starts the ListofFigures with a left page if the previous page in the book
was a right one. Or starts the ListofFigures with a right page if the previous page in the
book was a left one.

•

Left: Use this value to start ListofFigures with a left page.

•

Right: Use this value to start ListofFigures with a right page.

BookWithFM-ListofTables
Template
Name of the template FrameMaker uses for generating the ListofTables in the output.
ElementTags
Specify the element tags to include in the ListofTables. Delimit multiple element tags with
pipelines.

33

ditafm-output.ini
ParaTags
Specify the para tags to include in the ListofTables. Delimit multiple marker tags with pipelines. Default marker tag type to include is table.title.
PageNumbering
Set the page numbering flag for the ListofTables file using one of the following values:
•

Restart: Restart page numbering from 1.

•

Continue: Continue from previous file.

•

ReadFromFile: Use the numbering value specified in the associated document.

PageNumberingValue
If you have specified PageNumbering as Restart, specify a number to hardcode the first page’s
number. Default value is 1.
PageNumberingFormat
Choose one of the following as the ListofTables page numbering format:
•

Numeric

•

Roman_UC

•

Roman_LC

•

Alpha_UC

•

Alpha_LC

•

Kanji

•

Zenkaku

•

Zenkaku_UC

•

Zenkaku_LC

•

Kanji_Kazu

•

Daiji

•

FullWidth

•

FullWidth_UC

•

FullWidth_LC

•

Chinese_Numeric

Pagination
Specify the pagination of the ListofTables as:
•

DoubleSided

34

ditafm-output.ini
•

1

SingleSided

If you have selected the pagination as double sided, also set the FirstPageSide flag.
PageRounding
Set the page rounding flag as one of the following:
•

MakeEven: FrameMaker makes the number of pages in the ListofTables even, if not already
even, by inserting a blank page in the end.

•

MakeOdd: FrameMaker makes the number of pages in the ListofTables odd, if not already odd,
by inserting a blank page in the end.

•

DontChange: FrameMaker does not change the number of pages in the ListofTables.

•

DeleteEmpty: FrameMaker deletes the empty pages in the end of the ListofTables.

FirstPageSide
Use one of the following options to set the first page of the ListofTables file:
•

ReadFromFile: Use the page side in the associated document.

•

NextAvailable: Starts the ListofTables with a left page if the previous page in the book was
a right one or starts the ListofTables with a right page if the previous page in the book was
a left one.

•

Left: Use this value to start ListofTables with a left page.

•

Right: Use this value to start ListofTables with a right page.

BookWithFM-BookTitle
Template
Name of the template FrameMaker uses for generating the BookTitle in the output.
PageNumbering
Set the page numbering flag for the book title file using one of the following values:
•

Restart: Restart page numbering from 1.

•

Continue: Continue from previous file.

•

ReadFromFile: Use the numbering value specified in the associated document.

PageNumberingValue
If you have specified PageNumbering as Restart, specify a number to hardcode the first page’s
number. Default value is 1.
PageNumberingFormat
Choose one of the following as the book title page numbering format:

35

ditafm-output.ini
•

Numeric

•

Roman_UC

•

Roman_LC

•

Alpha_UC

•

Alpha_LC

•

Kanji

•

Zenkaku

•

Zenkaku_UC

•

Zenkaku_LC

•

Kanji_Kazu

•

Daiji

•

FullWidth

•

FullWidth_UC

•

FullWidth_LC

•

Chinese_Numeric

Pagination
Specify the pagination of the book title file as:
•

DoubleSided

•

SingleSided

If you have selected the pagination as double sided, also set the FirstPageSide flag.
PageRounding
Set the page rounding flag as one of the following:
•

MakeEven: FrameMaker makes the number of pages in the file even, if not already even, by
inserting a blank page in the end.

•

MakeOdd: FrameMaker makes the number of pages in the file odd, if not already odd, by
inserting a blank page in the end.

•

DontChange: FrameMaker does not change the number of pages in the file.

•

DeleteEmpty: FrameMaker deletes the empty pages in the end of the file.

FirstPageSide
Use one of the following options to set the first page of the file:
•

ReadFromFile: Use the page side in the associated document.
36

ditafm-output.ini

1

•

NextAvailable: Starts the file with a left page if the previous page in the book was a right
one. Or starts the file with a right page if the previous page in the book was a left one.

•

Left: Use this value to start file with a left page.

•

Right: Use this value to start file with a right page.

BookWithFM-ListOfPara
Template
Name of the template FrameMaker uses for generating the list of paras file in the output. If this
template is not specified the list of paras file is not created.
ElementTags
Name of the element tags to include in the list of paras file in the output. Use pipelines to
delimit multiple element names.
ParaTags
Name of the marker tags to include in the list of paras file in the output. Use pipelines to delimit
multiple para tag names.

BookWithFM-ListOfParaAlphabetical
Template
Name of the template FrameMaker uses for generating the (alphabetical para list) APL file in
the output. If this template is not specified the APL file is not created.
ParaTags
Name of the para tags to include in the APL file in the output. Use pipelines to delimit multiple
para tag names.

BookWithFM-ListofMarkers
Template
Name of the template FrameMaker uses for generating the list of markers file in the output. If
this template is not specified the file is not created.
MarkerTags
Name of the markers to include in the file. Use pipelines to delimit multiple marker names.

37

ditafm-output.ini

BookWithFM-ListofMarkersAlphabetical
Template
Name of the template FrameMaker uses for generating the alphabetical list of markers file in
the output. If this template is not specified the file is not created.
MarkerTags
Name of the markers to include in the file. Use pipelines to delimit multiple marker names.

BookWithFM-ListOfReferences
Template
Name of the template FrameMaker uses for generating the list of references file in the output.
If no template is specified, this file is not generated.
References
Name of the marker tags to include in the list of references file in the output. Specify the
following marker names in this flag delimited by pipelines: Fonts|Graphics|ExternXrefs|UnresolvedXrefs|Conditions|UnresolvedTextInsets|TextInsets.

BookWithFM-IndexOfAuthors
Template
Name of the template FrameMaker uses for generating the index of authors file in the output.
If no template is specified, this file is not generated.
MarkerTags
Name of the marker tags to include in the index of authors file in the output. Use pipelines to
delimit multiple marker names. You can add one or more of the following markers:
Fonts|Graphics|ExternXrefs|UnresolvedXrefs|Conditions|UnresolvedTextInsets|TextInsets.

BookWithFM-IndexOfSubjects
Template
Name of the template FrameMaker uses for generating the index of subjects file in the output.
MarkerTags
Name of the marker tags to include in the index of subjects file in the output.

38

ditafm-output.ini

1

BookWithFM-IndexOfMarkers
Template
Name of the template FrameMaker uses for generating the index of markers file in the output.
If a template is not specified, this file is not generated.
MarkerTags
Name of the marker tags to include in the index of markers file in the output.

BookWithFM-IndexOfReferences
Template
Name of the template FrameMaker uses for generating the index of references file in the
output. If no template is specified, this template is not generated.
References
Name of the marker tags to include in the index of references file in the output. Specify the
following marker names in this flag delimited by pipelines: Fonts|Graphics|ExternXrefs|UnresolvedXrefs|Conditions|UnresolvedTextInsets|TextInsets.

39

Maker.ini

Maker.ini
Reginfo
Reginfo section and its flags are no longer used.
User
The user logged in to the computer when FrameMaker was installed.
Company
Name of the company. FrameMaker picks up the company name from the OS information.
RegNum
Registration number
ASN
Application serial number of FrameMaker.

Preferences
API
To enable the FDK client programs, set the API flag to On.
AskExit
When this flag is set to On, FrameMaker displays the OK to Exit FrameMaker? dialog box.
ShowErrors
Log / stop logging errors in the file ErrorFileName (for Off the console window is not
displayed)
ErrorFileName
FrameMaker creates this file on every launch. This file stores console error and warning
messages.
GreekSize
Specify a point size at which the text displayed on the screen is grayed out.
RememberMissingFontName
Set this flag to decide whether FrameMaker preserves unavailable fonts’ names. When this flag
is set to On, FrameMaker remembers missing fonts’ names and replaces the relevant text with

40

Maker.ini

2
different fonts. When missing fonts are available again, such as on a different computer or after
installation, FrameMaker uses the correct fonts again.

PluginExtensions
List the FrameMaker plugins here.
ApiCoverage
API coverage file name. FrameMaker uses this file on shut down to store the coverage.
ExecutablePlugins
Extension for executable plugins.
DisableAutofitAfterZoom
When you use the Fit Windows® to Text Frame option in the Zoom pop-up menuand then
change the zoom level, this flag determines whether the window resizes to fit the changed zoom
level or not. When you set this flag to On and then change the zoom level, FrameMaker does
not resize the document window.
CrossPlatformFileNaming
This flag decides whether to alert you that the filenames you are saving may be illegal on one
or more platforms. These problems are about prohibited characters or length of the filenames.
Default settings: Windows® 9x/2000/NT
GetLibraryColorRGBFromCMYK
In FrameMaker 5.5.6 and later, this flag allows control of the display and printing of library
colors. The four settings you can use with this option are:
•

Printing: (Default option) Displays the RGB values from the library color description and
prints the RGB values converted from CMYK values.

•

None: Displays and prints the RGB values from the library color description.

•

Printing&Screen: Displays and prints the RGB values converted from CMYK values.

•

Screen: Displays the converted RGB values and prints the RGB values from the library
color description.

These options are for RGB printing only. The CMYK option always uses CMYK colors.
WrappedPlugins
Not supported in FrameMaker 11.
UseSystemCursor
Set this flag as On to use a custom system cursor instead of the built-in FrameMaker cursor.
When you set this flag to On, FrameMaker uses the OS cursors for mouse actions such as
Rotate or Drag.
BackupOnSave
Set this flag as On to create backup file when you save a file.
41

Maker.ini
AutoSave
Number of minute after which FrameMaker automatically creates a backup file for the active
file.
FMImage
This flag controls whether a FrameImage facet is saved with imported graphics by default. The
default value is off.
NetworkLock
If this flag is set to On, FrameMaker creates a lock file (.lck extension) for an open file. The lock
file prevents another user from opening and editing the same file. Another user, however, can
view a read-only copy of an open file.
InputMethodAutoActivation
Typing text in Asian fonts is accomplished using a special input device. FrameMaker can
recognize when you are typing an Asian font and load this device automatically. By default, this
flag is set to On. If you set this flag to Off, use the appropriate command to load the input
device.
LastActiveView
Last view, XML, Author, or WYSIWYG, active when user exited the FM session.
RetainTempFileWhenNotExportingInvalidXML
Whether or not to retain the invalid xml in the temp directory while saving an XML file. The
user may want to see the temp file for errors.
ApplyDestCondOnPastedText
Set this flag to On to paste conditional content using the destination document’s settings.
ConfigurationFilePath
Global file path to read XML attributes.
ApplyCondTillElementBoundaries
Set this flag to On to apply conditional text to complete elements rather than part text inside
the element.
CreateAllNamedDestinations
When this flag is set to On, FrameMaker creates all the possible named (all paragraphs and
elements) destinations. The On or Off value you set here is used a default value for the "Create
all named destinations" option in the PDFSetup dialog.
Snap
Set this flag to On to align new or moved graphics to snap grid.
Gravity
When you set this flag to On, gravity is enabled. Gravity ensures perfect alignment when
drawing or resizing an object.
42

Maker.ini

2

EPSLevelForPlacedPDF
The EPSLevelForPlacedPdf specifies the level of EPS to use for placed PDF images. By default,
FrameMaker prints imported PDF (Placed PDF) files by converting them to Level 2 EPS files.
Use this setting to specify Level 1 or Level 2.
CtrlAltIsAltGr
If your keyboard does not have an Alt Gr key and you need it, set this flag as On. Now, you can
use the Ctrl and Alt keys together to achieve the same.
ZoomScale
Structure window zoom value.
ElemFontJapanese
Structure window element font for Japanese.
ElemFontKorean
Structure window element font for Korean.
ElemFontTraditionalChinese
Structure window element font for traditional Chinese.
ElemFontSimplifiedChinese
Structure window element font for simplified Chinese.
EnableUndoInFDK
Yes enables recording “undo” history in FDK APIs. Turn this option Off to improve performance of certain FDK clients.
hpWarning
This flag controls whether or not FrameMaker displays "history will be cleared, can't undo"
alert.
ClearHistoryOnSave
If this flag is set as On, FrameMaker clears the history on save.
UndoHistorySize
Size of undo list.
CopyFileInfoOnImport
Allow/disable import of file Info.
DontShowWelcomeScreen
Set this flag to On, to hide the FrameMaker welcome screen.

43

Maker.ini
NoFlashInPDF
When this flag is set to On, the Flash (SWF file) content in a FrameMaker document becomes
inactive in PDF. When this flag is set to Off, SWF files get embedded in the PDF and are playable.
No3DInPDF
When this flag is set to On, the U3D content in a FrameMaker document becomes inactive in
PDF. When this flag is set to Off, U3D objects get embedded in the PDF.
ConvertGraphicsToEPS
When this flag is set to On, when you save a FrameMaker file as PDF, the TIFF, PSD, and JPEG
images in the documents are converted to EPS.
SymbolSortingBeforeAlphaNumeric
When this flag is set to On, after the sorting of tags, the tags starting with symbols would appear
before tags with alphanumeric initials.
AlwaysDownloadURL
FrameMaker stores imported images as temporary files. If you import a file for the second
time, the file is not downloaded again. After importing an image file into FrameMaker, the
changes that you make in the file are not reflected in FrameMaker until you delete the temporary file and reimport the image file.
To avoid having to delete the temporary file, set the AlwaysDownloadURL flag to On.
LocDisplayCriteria
When this flag is set to On, FrameMaker indicates the location of the object such as (variable,
marker, or conditional).
Related flags:
•

LocParaStyle1

•

LocParaStyle2

•

LocElementType1

•

LocElementType2

LocParaStyle1
When you set LocDisplayCriteria, as On, use this flag to specify first column’s title as para
style’s name in Pods. Default value is Heading1. This flag is relevant to Unstructured
FrameMaker. For more information on Pods, see FrameMaker Help.
LocParaStyle2
When you set LocDisplayCriteria, as On, use this flag to specify second column’s title as para
style’s name in Pods. Default value is Heading2. This flag is relevant to Unstructured
FrameMaker. For more information on Pods, see FrameMaker Help.

44

Maker.ini

2

LocElementType1
When you set LocDisplayCriteria, as On, use this flag to specify first column’s title as element
name in Pods. Default value is Element1. This flag is relevant to Structured FrameMaker. For
more information on Pods, see FrameMaker Help.
LocElementType2
When you set LocDisplayCriteria, as On, use this flag to specify second column’s title as
element name in Pods. Default value is Element2. This flag is relevant to Structured
FrameMaker. For more information on Pods, see FrameMaker Help.
ReplaceCacheSize
If you have memory issues when doing replace all/replace in a book, or during similar operations, reduce the replace cache size from the default 200.
RomanRanges
The code points between the start and end (inclusive) are treated as roman code range (While
rendering text, FrameMaker does not apply CJK rules to these ranges ).
CheckoutOnOpen
If set, checkout http files on open.
UploadOnSave
If set, upload http files on save.
LastUsedWorkSpaceInStructuredMode
Name of the Last Used WorkSpace in the structured mode.
LastUsedWorkSpaceInUnstructuredMode
Name of the Last Used WorkSpace in the unstructured mode.
NetLibTimeOut
The number of seconds to wait when connecting to the webdav server.
EnableHideChildWithParent
When this flag is set to On, FrameMaker hides child elements are also hidden along with parent
element.
AllowNewFileURL
This flag is for internal use only. Do not modify.
PostXSLTValidationOnExport
Whether or not to validate the file after “post close” XSLT is applied on XML.
DoNotExportInvalidXML
Whether to allow saving a file with invalid XML or not.

45

Maker.ini
SuppressXMLWarnings
On file open, suppress XML parser validation warnings.
RemoveExtraWhiteSpacesOnXMLImport
When this flag is set to Yes, FrameMaker converts multiple contiguous white spaces to a single
one. This option is useful while opening pretty printed (nested code) files.
OverwriteFileOnSPSUpload
Depreacted
NoMultimediaInPDF
If this flag is set to Off, FrameMake does not embed multimedia in the PDF.
DitaMapShowFileReferences
When this flag is set to On, FrameMaker displays only the file references in the Ditamap view.
FrameMaker does not display the metadata elements as they are not file reference nodes.
DitaMapShowNavtitle
When this flag is set to On, FrameMake displays the nav title element in the Ditamap view.
DirectOLESupportInXml
If this flag is turned On, while saving the XML files FrameMaker preserves the OLE objects
(does not convert into a MIF reference). For more information on direct OLE support in XML,
see FrameMaker Help.
MultiMediaLinkTableRowLimit
Enter a value to limit the number of rows in the multimedia link table. This table is relevant
when you create links to a graphic/multimedia in FrameMaker 11. It is possible for a
graphic/multimedia object to have hundreds of parts. Default value for this flag is 100. For
more information on multimedia links table, see FrameMaker Help.
API
To enable the FDK client programs, set the API flag to On.
Zoom
The zoom percent levels in the Zoom menu.
Default settings: 25, 50, 80, 90, 100, 120, 140, 150, 160, 200
Possible values: 25-1600
PenWidths
Pen widths in points (pt) for that appear in the Line Widths pop-up menu in the Tools palette.
These values are updated every time you exit FrameMaker, using the current settings in the
Line Widths pop-up menu.
Default settings: 0.5, 1.0, 3.0, 4.0
Possible values: 0.15-360
46

Maker.ini

2
Relevant user interface dialog: Line Width Options (Launched from the graphics toolbar)

ClipboardFormatsPriorities
Use this flag to control the clipboard paste options. You can tweak this flag’s values to ensure
when you paste from Microsoft® applications to FrameMaker, the pasted text appears as text,
unicode text, OLE object, or any other format.
Default settings: FILE, MIFW, MIF, RTF, OLE 2, META, EMF, DIB, BMP, UNICODE TEXT,
TEXT
Possible values: You can change the order of the values.
AutoMnemoniseMenus
This flag determines if mnemonic command shortcuts are shown on menus. Mnemonic shortcuts are underlined letters in command labels. When a menu is open, you can choose a
command by typing the underlined letter (for example, the O underlined in the Open
command on the File menu).
Possible values: On and Off
StickyPopupThreshold
This flag controls how long, in miliseconds, you must hold down the mouse button for pop-up
menus, such as the Zoom menu, to open. The preset value, 500, specifies an interval similar to
that for opening menus in the menu bar.
UseDisplayUnitInTemplate
When this flag is set to On, the default display units for the ruler, grid, and snap are based on
the document template. When this flag is set to Off, the values are taken from the ini file itself.
GDIRasterizeKiloPixelLimit
When getting the facet from PDF, limit the number of pixels we use in rasterizing.
DefaultRulerInch
Values in inches for the tick marks on the vertical and horizontal rulers in new documents.
This setting is applied only when UseDisplayUnitInTemplate is set to Off. Otherwise,
FrameMaker uses the values in the template.
DefaultRulerCm
Values in centimeters for the tick marks on the vertical and horizontal rulers in new documents. This setting is applied only when UseDisplayUnitInTemplate is set to Off. Otherwise,
FrameMaker uses the values in the template.
DefaultGridInch
Values in inches for spacing of the visible grid lines in new documents. This setting is applied
only when UseDisplayUnitInTemplate is set to Off. Otherwise, FrameMaker uses the values in
the template.

47

Maker.ini
DefaultGridCm
Values in centimeters for spacing of the visible grid lines in new documents. This setting is
applied only when UseDisplayUnitInTemplate is set to Off. Otherwise, FrameMaker uses the
values in the template.
DefaultSnapInch
Value in inches for the spacing of the snap grid lines in new documents. This setting is applied
only when UseDisplayUnitInTemplate is set to Off. Otherwise, FrameMaker uses the values in
the template.
DefaultSnapCm
Values in centimeters for the spacing of the snap grid lines in new documents. This setting is
applied only when UseDisplayUnitInTemplate is set to Off. Otherwise, FrameMaker uses the
values in the template.
UsePostscript
Set this option to On to use FrameMaker’s built-in methods of generating PostScript code. This
option is faster and of higher quality. Set this option to Off to standard Windows® methods to
generate standard postscript code. Using this method, FrameMaker creates preview image of
EPS graphics instead of the PostScript image.
MenuSet
FrameMaker has two built-in sets of menus for each product interface (FrameMaker and
Structured FrameMaker). Complete menus are the menus and commands as described in the
FrameMaker User Guide and in online Help. Quick menus are a subset of complete menus.
You can also create your own custom menu set. The MenuSet setting defines which set of
menus appears when you start. By default, the Complete menu set is used.
Possible values: Complete, Quick, and Custom
ConfigWarnKbdRedundant
If you set ConfigWarnKbdRedundant to On, you see warning messages in the console window
when you load the customization (*.cfg) file if it contains redundant shortcut definitions.
ConfigWarnKbdOverride
If you set ConfigWarnKbdOverride to On, you see warning messages when you load the
customization file if it contains shortcut definitions for commands that already have shortcuts
defined for them. The warning messages appear in the console window.
FirstRunOpenDoc
First file to be opened in FrameMaker during the first launch.
SplashScreen
Set this flag to On, to display splash screen on FrameMaker launch. Default is On.

48

Maker.ini

2

NonWriteableIniAlert
Set this flag to On to display an alert when FrameMaker cannot write/update the maker.ini file.
Default is On.
SuppressFontAlertOnOpen
Set this flat to On to suppress the missing font dialog when you open a document. Default is
Off.
SuppressLangAlertOnOpen
Set this flag to On to suppress alerts when opening document about some of the languges used
in the document aren't available with FM. Default is Off.
PantoneFile
Path of the Pantone Color Library cvc file. Default is fminitpantone.cvc.
ForceFileTypeChoices
Set this flat to On, to display the Unknown File Type dialog every time you try to open an
unknown file type in FrameMaker. The Unknown File Type dialog gives you an option to
convert some file types, such as Excel, Word, and Text, to a FrameMaker file. If you set this flag
to Off, FrameMaker displays the message “Cannot open the file.”
Default is Off.
SuppressExtensions
The SuppressExtensions setting controls which file extensions are suppressed when suppression is enabled. By default, only .fm and .book extensions are suppressed. If you want to disable
all file extension suppression, you can either disable extension suppression in the shell or edit
SuppressExtensions to have a blank value.
ElemFont
Use this flag to specify the font name of the structure window element.
ElemSize
Use this flag to specify the font size of the structure window element.
AttrFont
Structure window attribute font name.
AttrSize
Structure window attribute font size.
AttrValFont
Structure window attribute value font name.
AttrValSize
Structure window attribute value font size.

49

Maker.ini
KeywordFont
Structure window keyword font name.
KeywordFontSize
Structure window keyword font size.
AttrErrSym
Structure window attribute error symbol.
AttrSepSym
Structure window attribute separator symbol.
ExpandSym
Structure window expand symbol.
CollapseSym
Structure Window collapse symbol.
AttrNoneSym
Structure window attribute none symbol.
AttrSomeSym
Structure window attribute some symbol.
AttrAllSym
Structure window attribute all symbol.
JapaneseImperialEra
Japanese imperial era date strings. Enter the date in the following format: DD MM YY Name |
DD MM YY Name | DD MM YY Name |. The most recent era should come first followed by
older ones. The last item is the era after "Heisei" era.
DisplayFileLeafFirst
When this flag is set to On, FrameMaker displays the filename in the title of the document or
book window before the path.
WMFPrintOption
Set this flag to 2 to convert wmf to emf during printing.
PluginCache
Plugin directory cache. Specify the directory for FrameMaker plugins.
FontCache
Font directory cache. This file will cache the information FrameMaker stores in the SBX files.
On startup, FrameMaker reads the info from the cached file instead of opening and reading
each file every time.

50

Maker.ini

2

AutoCollapseIconicPods
If this flag is set to On, when a pod is in iconic mode, clicking the icon of the pod in
FrameMaker opens the pod. When focus goes away from the pod it collapses to an icon.
AutoShowHiddenPods
If this flag is set to On, in the full screen mode of FrameMaker, the pods and toolbars appear
in a thin dark-grey strip. Hovering over these pods and toolbars shows the pods and toolbars.
HidePodsOnClose
When you close pods they are hidden but are still active in the memory and may affect
FrameMaker’s performance. If you set this flag to Off, FrameMaker removes the pods when
you close them. To display them again, choose them from the FrameMaker menus.
Relevant user interface dialog: Preferences dialog (Edit > Preferences)
OpenDocsAsTabs
Set this flag to On to enable displaying documents as tabs in FrameMaker.
HideSingleTabsInDocs
If this flag is set to On, when a floating document is solo, its single tab is not shown.
PreventDocTabbingWhenDragging
Set this flag to On to preven document tabbing while dragging.
OpenCompDocsAsTabs
Set this flag to On to allow opening composite documents as tabs.
ToolTipMode
Set this flag to Normal, Fast, or Hidden to define the tooltip appearance mode.
UIBrightness
FrameMaker UI brightness: light or dark.
UseGrayScaleAppIcon
Whether to use greyscale application icon or not.
MaxMruListSize
Limit of recent files list.
EnableAutoSpellCheck
Enable/disable auto spell check.
InsetFilePathForMissingPoster
Enter the name of the file to be used as a poster if the actual poster is not valid/readable.
RepeatTypingEnabled
By default this entry is set to ON. Set this entry to OFF to disable the repeat typing operation.

51

Maker.ini
RepeatEnabled
Enable/disable repeat last executed command.
EnableOleOptimization
Optimize handling of OLE objects.
ApplyAsCondition
Show/hide the following options in the manage attribute expressions dialog:
•

Ditaval as condition

•

Apply condition tag

•

Remove if previously applied

MissingGraphicsDialog
Not processed for FrameMaker 11.
UnresolvedCrossReferencesDialog
If this flag is set to On, FrameMaker displays the Unresolved Cross references dialog box while
opening a document that has unresolved cross references.
OpeningOldReleaseDocDialog
If this flag is set to On, FrameMaker displays an alert while opening an older release document.
UnsupportedHotspotShapesDialog
When this option is set to On, if there are unsupported hotspot shapes in an fm file,
FrameMaker displays the Unsupported Hotspot Shapes dialog when generating PDF.
UnavailableFontsDialog
If this flag is set to On, FrameMaker displays an alert while opening a document with unavailable fonts.
DictionaryProviderMismatchDialog
If this flag is set to On, FrameMaker displays an alert while opening a document if the
FrameMaker current session’s dictionary provider does not match the document’s dictionary
provider.
ShowLearningResourcesOnStarterPage
Whether to show learning resources on the welcome screen.
DontLoadStartupScripts
The list of script which you do not want to load on start up.
QuerySessionRestoreOnLaunch
If the last FrameMaker session ended in a crash and it can be restored, then on the next
FrameMaker session launch ask if user wants to restore session.

52

Maker.ini

2

EnableOldSmartInsert
If the flag is set to ON, the FrameMaker 11 Smart Insert functionality is enabled. Default: OFF.
LastUsedWorkSpaceInXMLAuthorMode
Display the last used workspace in the FrameMaker XML Author mode.
LastActiveViewInXMLAuthorMode
Display the last active view in FrameMaker XML Author mode.
UnsupportedFileFormatForModeDialog
Suppress the alert that is displayed while opening a file format that is not supported in the
current mode.
UnsupportedFileFormatForViewDialog
Suppress the alert that is displayed while opening a file format that is not supported in the
current view.
OpenDocOnDragDrop
Open a document that is dragged on to the document window.
ImageDefaultRunaroundStyle
Set the initial (default) value for runaround style of an image when the image is inserted in a
FrameMaker document. Possible values:
•

Contour

•

BoundingBox

•

None

RegularExpressionSyntax
Specify the engine to use in regular expression search and replace. Possible options:
•

egrep

•

grep

•

Perl

LoadAdobeFontsOnStartup
Set the flag to ON to load the fonts in the adobe directory on start up. Default: OFF.
LoadStartupScripts
Set the flag to ON to load the ExtendScripts on start-up. Default: OFF.
DelayLoadClients
Set to ON to load all clients in idle loops after FrameMaker launches. Default: OFF.
ToolBarIconsSize
Specify the size of toolbar icons. Possible values:
53

Maker.ini
•

Large

•

Small

ToolBarIconsColor
Specify the color option of toolbar icons. Possible values:
•

Colored

•

Monochrome

FormViewUsesSmartPaste
When this flag is set to On, FrameMaker uses Smart Paste if you copy and paste content from
external applications such as MS Word, Excel, or a browser. If the flag is set Off, the content
from external applications is pasted as plain text.
TranslateObjectOnDirectionChange
When this flag is on, if an object is placed 10 px from the left margin, changing the direction
(RTL – LTR) will cause the object to be placed 10 px from the right margin. However, the
orientation of the object remains the same.
FlipObjectOnDirectionChange
When this flag is on, if an object is placed 10 px from the left margin, changing the direction
(RTL – LTR) will cause the object to be placed 10 px from the right margin. The orientation of
the object is flipped (mirrored).
PrefGridView
Set the flag to On to view the grid lines in all open documents in the current session.
PrefGridViewValue
Use this flag and specify the grid line spacing. Default value is 0.
PrefRulersView
Set the flag to On to view the vertical and horizontal rulers in all open documents in the current
session.
PrefRulersViewValue
Use this flag and specify the scaling value of the ruler. Default value is 0.
PrefBordersView
Set the flag to Onto view the border of the text frame in all open documents in the current
session.
PrefSymbolView
Set the flag to On to view text symbols like an end of paragraph, anchored frame, table or other
formatting information in all open documents in the current session.
PrefHotSpotIndicator
Set the flag to On to view the hotspot indicators in all open documents in the current session.
54

Maker.ini

2

PrefElementBoundaryAsBracket
Set the flag to On to view element boundaries as square brackets around the content in all open
documents in the current session.
PrefElementBoundaryAsTag
Set the flag to On to view the tag names as element boundaries around the content in all open
documents in the current session.
BookZoomPercentage
This flag controls the zoom percentage of the book window. Default value is 100.
CMSZoomPercentage
This flag controls the zoom percentage of the Repository Manager window. Default value is
100.
ProjectZoomPercentage
This flag controls the zoom percentage of the project window. Default value is 100
DitamapZoomPercentage
This flag controls the zoom percentage of the DITA map window. Default value is 100.
FindStrings
This flag saves the strings searched in the Find/ Change dialog. A history of searched strings is
maintained across FrameMaker sessions.
ChangeStrings
This flag saves the strings changed through the Find/Change dialog. A history of changed
strings is maintained across FrameMaker sessions.
ForceAsianLayout
Use this flag to toggle the usage of Asian layout (RTL) engine. Default is Off.
ShowInAppMessages
Set this flag to On to enable the contextual tips in FrameMaker.
EnableStandardLigaturesForFonts
This flag lists the font names that allows standard ligatures.
PrefShowStructTextValue
Set this flag to On to show the topic’s content in the Structure View of the document.

55

Maker.ini

DropBoxPreferences
DefaultDropBoxFolder
Set the default Dropbox folder.
CreateFolderStructureInDropBox
Allow user to define a folder structure to push all dependent files into Dropbox folder.
RemoveFileWhileMovingFromDropBox
Delete files from disk after the files are uploaded to Dropbox folder.
DisableWarningWhileMovingFromDropBox
Disable alerts that display when you delete files from disk, while moving to Dropbox folder.

Fonts
DisplayUsingPrinterMetrics
Set this flag to ON to display the text in FrameMaker using the printer metrics, so that the
dimensions and spacing of the glyphs match with the printer output.
When you set this flag to OFF, FrameMaker uses the screen metrics instead of printer metrics
and printed output may differ from how the content appears on the screen.
Sizes
Specify a point size of the font, such as 7pt, 8pt, 9pt, 10pt, 11pt, 12pt, 14pt, 18pt, 24pt, or 36pt.
Angles
Specify a font angle, such as Regular, Kursiv, Slanted, Oblique, Italic, or Obliqued. If you specify
any other font angle, FrameMaker uses Italic.
Variations
Specify one of the following as a font variation: UltraCompressed, ExtraCompressed,
Compressed, Condensed, Narrow, Regular, Wide, Poster, or Expanded.
Weights
Specify one of the following as the font weight: Thin 100, ExtraLight 200, SemiLight 250, Light
300, Book 300, Regular 400, Medium 500, SemiBold 600, DemiBold 600, Bold 700, ExtraBold
800,or Heavy 900.
DefaultJapaneseFamily
Default Japanese font family.
DefaultKoreanFamily
Default Korean font family.
56

Maker.ini

2

DefaultSimplifiedChineseFamily
Default simplified Chinese font family.
DefaultTraditionalChineseFamily
Default traditional Chinese font family.
DefaultJapaneseDialogFont
Default font for Japanese dialogs.
DefaultKoreanDialogFont
Default font for Korean dialogs.
DefaultSimplifiedChineseDialogFont
Default font for simplified Chinese dialogs.
DefaultTraditionalChineseDialogFont
Default font for traditional Chinese dialogs.
BannerFont
Specify a font for the Banner window.
NonTextFamilies
Add FrameMaker font family names that are not spellchecked.

CMSFavorites
DctmOverwriteObjectOnUpload
This flag is relevant to Documentum®. If this flag is set to On, when you upload a file, Documentum® overwrites the server copy. If this flag is set to Off, Documentum® creates versions
and does not overwrite the copy.
DctmOverwriteObjectAsVersion
This flag is relevant to Documentum®. Only if DctmOverwriteObjectOnUpload is set to Off,
this flag is relevant.
This flag can have one of the following values:
•

0: The file is uploaded as the same version.

•

1: The file is uploaded as major version.

•

2: The file is uploaded as minor version.

ShowHiddenObjects
This flag is relevant to Documentum® only.

57

Maker.ini
When this flag is set to On, FrameMaker displays the hidden objects in the tree view.
ShowPrivateCabinets
This flag is relevant to Documentum® only.
When this flag is set to On, FrameMaker displays the private cabinets in the tree view.
DfsSdkPath
This flag is relevant to Documentum® only.
Specify a path for the DFS SDK.
SpOverwriteObjectOnUpload
This flag is relevant to Sharepoint.
If this flag is set to On, when you upload a file, Sharepoint overwrites the server copy. If this
flag is set to Off, Sharepoint creates versions and does not overwrite the copy.
SpOverwriteObjectAsVersion
This flag is relevant to Sharepoint. Only if SpOverwriteObjectOnUpload is set to Off, this flag
is relevant.
This flag can have one of the following values:
•

1: The file is uploaded as major version.

•

2: The file is uploaded as minor version.

DitaExchangeOverwriteObjectOnUpload
This flag is relevant to DITA Exchange.
If this flag is set to On, when you upload a file, DITA Exchange overwrites the server copy. If
this flag is set to Off, Dita Exchange creates versions and does not overwrite the copy.
DitaExchangeOverwriteObjectAsVersion
This flag is relevant to DITA Exchange. Only if DitaExchangeOverwriteObjectOnUpload is set
to Off, this flag is relevant.
This flag can have one of the following values:
•

1: The file is uploaded as major version.

•

2: The file is uploaded as minor version.

Null
List of custom attributes, attribute data types, and attribute types for SharePoint.
Null
List of custom attributes, attribute data types, and attribute types for Documentum.

58

Maker.ini

2

Directories
LanguageDir
This flag specifies the language directory for FrameMaker, which has files such as hyphenation
settings and language dictionaries for spell-checking.
TemplateDir
Name of the folder that has standard FrameMaker templates.
FilterDllDir
FilterDllDir specifies the folder that contains the filters installed on your system.
OpenDirOnStart
The default directory for file open/save dialogs.
PaletteDir
FrameMaker uses this flag to determine location of template browsers.
PaletteDirStructure
FrameMaker uses this flag to determine templates, such as structure window, error log, and
element catalog.
AlwaysOnTopPaletteDir
Palettes in AlwaysOnTopPaletteDir always float in front of documents.
ColorLib
ColorLib specifies the folder that contains color library files. FrameMaker reads these files in
at startup and displays them in the Color Libraries pop-up menu in the Color Definitions
dialog box. You can add any library file formatted in the ASCII Color Format (.acf), version 2.1
or earlier, or in the Binary Color Format (.bcf), version 2.0. You can’t use a FrameMaker
product to save a .bcf library file.
FontDir
Do not change this flag’s value.
Directory containing FrameMaker’s fonts.
UnicodeDir
Do not edit.
This flag specifies the folder that contains Unicode files that are used to support Asian text in
Acrobat bookmarks and other Acrobat features.
Samples
Directory of FrameMaker sample files

59

Maker.ini
Clipart
Sample clipart files
Templates
Sample FrameMaker templates
SgmlDir
Location of SGML applications for Structured FrameMaker
XmlDir
Location of XML applications for Structured FrameMaker
StructureDir
Path of the FrameMaker Structured directory, which contains SGML application, XML Applications, and default read/write rule files.

Files
UserDictionary
Location of FrameMaker’s user dictionary file.
SiteDictionary
Location of FrameMaker’s site dictionary file.
CustomDoc
The template for creating a FrameMaker custom document.
AsciiTemplate
The template for creating a custom text document.
EquationDoc
The equations palette
ThesaurusDoc
The Thesaurus dialog box
TemplateBrowserDoc
The Templates browser when running with the FrameMaker product interface.
RunWrappedPlugin
Extension for wrapped plugin.
MarshallingDLL
List of DLLs for marshalling.

60

Maker.ini

2

StructTemplateBrowserDoc
The structured template browser file.
VerticalQuickAccessBar
The file used as a template file for the FrameMaker's Vertical Quick Access bar.
InsetFilePathForMissingPoster
The file to be used as a poster if the specified poster file is missing.
TransformationFilePath
The default XSLT transformation file. For more information on XSLT transformations, see
FrameMaker Help.
ConfigMenuFile
The Menu configuration file for Unstructured FrameMaker.
ConfigMenuFileStructure
The Menu configuration file for Structured FrameMaker.
ConfigMenuFileXMLAuthor
The Menu configuration file for FrameMaker XML Author.
ConfigMathFile
The Math commands configuration file for FrameMaker.
ConfigMathFileXMLAuthor
The Math commands configuration file for FrameMaker XML Author.
MSWinConfigCommandsFile
The Windows commands configuration file for FrameMaker.
MSWinConfigCommandsFileXMLAuthor
The Windows commands configuration file for FrameMaker XML Author.
ToolBarXMLFile
The toolbar configuration file for FrameMaker.
ToolBarXMLFileXMLAuthor
The toolbar configuration file for FrameMaker XML Author.
ClientCommandsDescFile
The command description file to add corresponding description of the commands created by
client. By default, the command descriptions are stored in the <FrameMaker_install_location>\fminit\configui\ClientCmdDesc.cfg file.

61

Maker.ini

SpellingProviderPreferences
Name of the spelling service provider and languages supported. For example, in the following entry,
Proximity is the service provider and US English and UK English are the languages that Proximity
supports:
Proximity=US English,UK English
To add more languages to a provider, add comma-separated language names.

HyphenationProviderPreferences
Name of the hyphenation service provider and languages supported. For example, in the following
entry, Proximity is the service provider and US English and UK English are the languages that Proximity supports for hyphenation:
Proximity=US English,UK English
To add more languages to a provider, add comma-separated language names.

ThesaurusProviderPreferences
Name of the thesaurus service provider and languages supported. For example, in the following
entry, Proximity is the service provider and US English and UK English are the languages that Proximity supports for thesaurus:
Proximity=US English,UK English
To add more languages to a provider, add comma-separated language names.

DialogLayout
MakerWin
Use this flag in the maker.ini file in Application Data (Application
Data\Adobe\FrameMaker\11). The values for MakerWin specify normal, minimized, and
maximized positions. The first value determines which position to use; its value is 1 for normal,
2 for minimized, or 3 for maximized. The next six values are pairs of x and y offsets that specify
the different window positions; the first pair specifies the minimized position, the second pair
specify the maximized position, and the third pair specify the normal position. The last two
values are the normal window width and height.
62

Maker.ini

2

PCatalog
The settings for the Paragraph Catalog (PCatalog) specify first an x and y value for the location
of the catalog. The x value specifies the offset in pixels from the left side of the screen. The y
value specifies the offset in pixels from the top of the screen. Optionally, the width and height
of the catalog, in pixels, appear after the x and y values.
CCatalog
Just like PCatalog, the settings for the Character Catalog (CCatalog) specify first an x and y
value for the location of the catalog. The x value specifies the offset in pixels from the left side
of the screen. The y value specifies the offset in pixels from the top of the screen. Optionally,
the width and height of the catalog, in pixels, appear after the x and y values.
Equation
Use this flag in the maker.ini file in Application Data (Application
Data\Adobe\FrameMaker\11). The values for this flag are x and y offsets that specify the
window position.
Possible values: Numerical values of x and y offsets that specify the window position.
Relevant user interface dialog: Equations
Numbering
Use this flag in the maker.ini file in Application Data (Application
Data\Adobe\FrameMaker\11). The values for this flag are x and y offsets that specify the
window position.
Thesaurus
Use this flag in the maker.ini file in Application Data (Application
Data\Adobe\FrameMaker\11). The values for this flag are x and y offsets that specify the
window position.
TemplateBrowser
Use this flag in the maker.ini file in Application Data (Application
Data\Adobe\FrameMaker\11). The values for this flag are x and y offsets that specify the
window position.
Relevant user interface dialog: The Template browser dialog (Standard Templates/Structured
Templates)
VerticalQuickAccessBar
FrameMaker (9 and prior) vertical toolbar properties.
VQuickAccessBar
FrameMaker (9 and prior) vertical toolbar properties.
ConsoleWin
Do not modify. Last used position/placement coordinates of the console window.

63

Maker.ini
StructureWindowDoc
Template for structure window.
TagFont
Font family of text used in tags of structure window. Default is Helvetica.
SnipFont
Font family of text snippet dispayed for text nodes in the struct window.
TagSize
Font size of text used in tags of struct window tags.
SnipSize
Font size of text snippet dispayed for text nodes in the struct window.
Origin
Starting point from where structure tree would be shown in the struct window.
SnipPos
Starting point coordinates from where text snippet would be displayed in the struct window.
Position
Coordinates of the structure window.
MenuSet
Possible values for the Menu set: Custom, Quick, or Complete. Default is Complete.

ViewClients
This section mentions the three views of FrameMaker: WYSIWYG, XML, and Author. To disable a
view in FrameMaker, use a semicolon to comment out the relevant line.
WYSIWYG View
WYSIWYG view’s settings. The first entry specifies whether the view is an internal one or
plug-in based. The second entry specifies if the view is relevant to Structured or Unstructured
FrameMaker (All = Structured and Unstructured FrameMaker). The third entry specifies the
name of the view. The fourth entry specifies the DLL file for the plug-in. If the view is an
internal one, the fourth entry is null. The fifth and the last entry is the name of the image file
for the icon used for the view in FrameMaker.
Default settings: internal,all,wysiwyg view,null,PL_SwitchToWYSIWYG
Possible values: To disable this view in FrameMaker, use a semicolon to comment out the
settings.

64

Maker.ini

2

Author View
Author view’s settings. The first entry specifies whether the view is an internal one or plug-in
based. The second entry specifies if the view is relevant to Structured or Unstructured
FrameMaker (All = Structured and Unstructured FrameMaker). The third entry specifies the
name of the view. The fourth entry specifies the DLL file for the plug-in. If the view is an
internal one, the fourth entry is null. The fifth and the last entry is the name of the image file
for the icon used for the view in FrameMaker.
Default settings: internal,structured,author view,null,PL_SwitchToAV
Possible values: To disable this view in FrameMaker, use a semicolon to comment out the
settings.
XML View
XML view’s settings. The first entry specifies whether the view is an internal one or plug-in
based. The second entry specifies if the view is relevant to Structured or Unstructured
FrameMaker (All = Structured and Unstructured FrameMaker). The third entry specifies the
name of the view. The fourth entry specifies the DLL file for the plug-in. If the view is an
internal one, the fourth entry is null. The fifth and the last entry is the name of the image file
for the icon used for the view in FrameMaker.
Default settings: plugin,structured,xml view,FMXmlView.dll,PL_SwitchToXmlView
Possible values: To disable this view in FrameMaker, use a semicolon to comment out the
settings.

XSLTProcessors
Use these settings to specify the path of XSLT processors. Ensure that all dependent jars of a
processor are in the same directory. If you do not specify a processor as default, the processor
mentioned first becomes the default XSLT processor.
XALAN
Specifies the path of the XALAN processor on the computer. FrameMaker uses this path to
locate the XALAN processor for XSLT processing. Suffix the path with, Default to make the
XALAN processor the default processor.
SAXON
Specifies the path of the SAXON processor on the computer. FrameMaker uses this path to
locate the SAXON processor for XSLT processing. Suffix the path with, Default to make the
SAXON processor the default processor.

65

Maker.ini

APIClients
The [APIClients] section lists FDK clients (plug-ins) to start when FrameMaker starts. Each client
description must be on a separate line.
Descriptions for clients that are not filters use the following format:
clientName=ClientType, description, path, mode

Argument

Specify

clientName

The plug-in name

ClientType

The client type—valid types for non-filter clients are Standard, TakeControl, and
DocReport

description

A string describing the FDK client

path

The path of the client’s DLL file—can be an absolute path, or relative to the install
directory

mode

Which mode of FrameMaker is valid for this client—can be one of makers, structured, or
all

For example, the Mailer client setting looks like:
Mailer=Standard, Send Mail API Client, fminit\mailer.dll,all
Clients that are filters use the following format:
clientName=ClientType, [facet, format_ID, vendor_id, display_name,
] description, path, mode, extension

Argument

Specify

clientName

The filter name

ClientType

The filter type—one of FileToFileTextImport, FileToFileGFXImport, or ExportFilter

facet

The format of the original file—For graphic files, FrameMaker saves this facet along with
the filtered representation of the graphic

format_id

The dot-extension of the file that identifies its format—for example, .rtf, .bmp, or .cgm

vendor_id

A four-character maximum string that identifies the vendor

display_name

The name to display in dialog boxes when the user chooses the filter

66

Maker.ini

2

Argument

Specify

description

A string to describe the filter

path

The path of the filter’s DLL file—can be an absolute path, or relative to the install directory

mode

Which mode of FrameMaker is valid for this filter—can be one of makers, structured, or
all

For example, the RTF filter client setting looks like:
RTF=TextImport, RTF, RTF, FAPI, RTF, Rich Text Format (RTF) Import,
filters\rtfimprt.dll, all, ^.rtf
To create a client, you need the Frame Developer’s Kit (FDK) for Windows®. If you are installing an
FDK client, follow instructions provided with the client to add its startup information to the initialization file. You can also load API clients simply by placing them in the Plugins folder and then
starting FrameMaker.

DashPatterns
The [DashPatterns] settings define the eight dash pattern choices that appear in the Dashed Line
Options dialog box. You can edit these settings to replace the standard choices with custom ones:
1=Dash, 8, 6
2=Hidden, 4
3=Longdash, 16, 10
4=Dot, 2, 4
5=Dash-Dot, 12, 6, 2, 6
6=Dash-Dot-Dot, 12, 6, 2, 6, 2, 6
7=Chain, 12, 6, 6, 6
8=Phantom, 20, 6, 6, 6, 6, 6

Each dash pattern contains a label that identifies the dash pattern in the Dashed Line Options dialog
box and a repeating series of dash and gap segment lengths. Dashes and gaps are measured in points.
The following illustration shows a dashed line and its segment description. The line is made up of a
12-point dash, a 6-point gap, a 6-point dash, and another 6-point gap. This pattern repeats to draw
a dashed line of any length.
If a dash pattern setting contains an odd number of segment lengths, the last dash value is repeated
for the final gap. For example, the following setting describes a dash pattern with 4-point dashes and
4-point gaps:
2=Hidden, 4
The dash pattern label cannot contain spaces or punctuation marks.

67

Maker.ini

Thermometers
A thermometer is a horizontal bar that shows progress during operations that can take some time.
One color, on the left of the bar, represents the percentage of the operation that is complete. Another
color, on the right of the bar, represents the percentage remaining. The thermometer updates as the
operation progresses. The [Thermometer] settings specify colors to use in thermometers as red,
green, and blue (RGB) values. You can change these values to specify different colors.
ThermoDoneColor=255, 0, 255
ThermoRemainingColor=192, 192, 192

DocCompare
CreateSummaryOnly
This flag sets the Create radio buttons in the Compare Documents and Compare Books dialog
boxes. When this setting is On, only a summary document is created. When this setting is Off,
both summary and composite documents are created.
MarkInsertedText
This flag controls the standard choice for marking insertions. You can choose:
•

ConditionInserted: The standard Inserted condition

•

ConditionTag: A custom condition

•

Nothing

Edit the file so the option you want is the only one without a semicolon before it. If you choose
a custom condition for inserted text, specify its tag with the InsertConditionTag setting.
MarkDeletedText
This flag controls the standard choice for marking deletions. You can choose:
•

ConditionDeleted: The standard Inserted condition

•

ConditionTag: A custom condition, ;

•

ReplacementText: Replacement text

Edit the file so the option you want is the only one without a semicolon before it.
Related flags:
•

DeleteConditionTag

•

DeleteReplacementText

68

Maker.ini

2

DeleteConditionTag
If you choose a custom condition for MarkDeletedText, specify the condition tag in the DeleteConditionTag setting.
DeleteReplacementText
If you choose replacement text for the MarkDeletedText setting, add the replacement text as a
text string in the DeleteReplacementText setting (in place of the ^).
AddChangeBars
Set this flag to On to add change bars to the composite document.
InsertHyperTextLinks
Set this flag to On to add hypertext links to the summary document.
CompareAttributesForElements
Set this flag to On to compare elements’ attribute values also during doc comparison.
ThresholdFactor
This flag controls when to mark an entire paragraph or table cell as changed. The preset value
is 75; an entire paragraph is marked as changed if 75 percent or more of the words are changed.
You can increase or decrease this percentage.

Spelling
The flags in the Spelling section in the initialization file define the options for spell-checking and
specify which style of quotation marks to use.
You can change any On setting to Off (and vice versa) and specify different characters in the last four
lines. These values are updated every time you exit, using the current settings in the Spelling Checker
Options dialog box.
NOTE: If you edit FindTwoInARow, IgnoreWordsContaining, FindSpaceBefore, and FindSpaceAfter,
be sure to leave a space between the On/Off toggle and the character or group of characters to the right
of it.

AdobeLinguisticsPath
The directory path to the FrameMaker linguistics folder.
UserDictModifiedTime
Last modified time of user dictionary.
SiteDictModifiedTime
Last modified time of site dictionary.

69

Maker.ini

BannerText
Banner text appears in elements in Structured FrameMaker and instructs you on what content
should go into an element. The flags in the BannerText section allow you to format and control the
BannerText.
BannerTextTextColor
Specify the color of the banner text for the structured documents. Default value is Black.
BannerTextFontAngle
Specify an angle of the banner text (Regular, Italic or As Is)for the structured documents.
BannerTextFontVariation
Specify a variation of the font width: UltraCompressed, ExtraCompressed, Compressed,
Condensed, Narrow, Regular, Wide, Poster, or Expanded.
BannerTextBKColor
The background color of banner text that distinguishes it from the text in the document. To
change, specify any color present in the document. To see available color names, click View >
Color > Definitions in FrameMaker.
RedisplayBannerTextForEmptyElements
Off: Banner text in a file does not reappear if you delete it once or save the file and reopen it.
On: Banner text reappears after you delete it or save and reopen the file.

FontAngleAliases
Windows fonts use different font angles even when font names are the same as on other platforms.
The settings under [FontAngleAliases] assign angles used on other platforms to Windows angles and
weights.
Defaults:
[FontAngleAliases]Obliqued=Oblique

FontWeightAliases
Windows fonts use different font weights, even when font names are the same as on other platforms.
The settings under [FontWeightAliases] assign weights used on other platforms to Windows
weights.

70

Maker.ini

2

Defaults:
[FontWeightAliases]Medium=RegularRoman=RegularSemi=SemiBoldDemi=De
miBoldBolded=Bold

WindowsToFrameFontAliases
Each setting under [WindowsToFrameFontAliases] assigns a Windows font to a FrameMaker font
name. Thus, font information appears in the Windows interface as it does in other versions of
FrameMaker. For example, Helvetica Narrow is normally a font family in Windows, but with
aliasing Helvetica appears as a font family and Narrow appears as a variation in the Character
Designer and Paragraph Designer.
Font aliasing also makes it possible to go back and forth easily between Windows and other platforms. FrameMaker automatically converts Windows fonts to their FrameMaker equivalents for
you.
The settings under [WindowsToFrameFontAliases] use this syntax:
Windows-font [angle|*], [weight|*]=Frame-font [angle|*],
[weight|*], [variation|*]
Windows-font is a font family available in Windows. The angle for this font can be either Regular or
Italic, and the weight can be one of the weights defined in the font profile under [Fonts]. You can also
use an asterisk (*) to specify no particular angle or weight.
Frame-font is a font family available on the other platforms. The angle, weight, and variation for this
family can be any of the ones defined in the font profile. If you use an asterisk (*), the FrameMaker
font will use the angle, weight, or variation from the Windows font.
For example, this setting assigns the Windows font family Helvetica Narrow to the FrameMaker font
name Helvetica with the Narrow variation:
HelveticaNarrow, * , *=Helvetica, * , * , Narrow
The two asterisks specify that angles and weights are not affected in this alias.
If you do not have an appropriate alias defined for a Windows font, the default alias is used:
Windows-font *, *=Frame-font *, *, *
You can add more aliases to [WindowsToFrameFontAliases] and change existing ones. Follow the
syntax for any changes you make.

71

Maker.ini

UnknownToKnownFontMap
When you open a document that requires fonts not available on your system, an alert box appears
telling you the document uses unavailable fonts. If you click OK, FrameMaker opens the document
and substitutes the unavailable fonts with the fonts specified under [UnknownToKnownFontMap]
in the initialization file. Initially, this section has a few lines of comments and some mappings for
common Macintosh® fonts. You can change these mappings and add others.
The mappings under [UnknownToKnownFontMap] must use this syntax:
unavailable_Frame_font [angle|*], [weight|*],
[variation|*]=available_Frame_font [angle|*],
[weight|*],[variation|*]
The angles, weights, and variations for these mappings can be any of the ones defined in the font
profile under [Fonts]. You can also use an asterisk (*) to specify no particular angle, weight, or variation.
For example,
Lumina, *, *=Helvetica, *, *, *
Helvetica, *, Light, *=Helvetica, *, Regular, *
Helvetica, *, *, UltraCompressed=Helvetica, *, *, Narrow

If you open a document with unavailable fonts and don’t have substitutes mapped for those fonts,
FrameMaker replaces them with the default fonts defined under [Fonts] instead. Note that the
settings under [UnknownToKnownFontMap] map one FrameMaker font to another. This is
different from [WindowsToFrameFontAliases], which assigns a FrameMaker font name to an
equivalent Windows font.

Filters
This section in the ini file contains settings for identifying foreign file formats, export filters, and
import filters. FrameMaker provides these settings when you install filters. If you want to change any
of the settings, install the filters again. Do not edit the settings manually in an initialization file.

72

Legal notices

Legal notices
Follow the links: Legal Notices

73

3

</pre><hr>Source Exif Data: <br /><pre>File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Language                        : en
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.150055, 2012/11/19-18:45:32
Creator Tool                    : FrameMaker 2015.0.5
Modify Date                     : 2017:01:31 09:20:28+05:30
Create Date                     : 2017:01:31 09:19:09Z
Metadata Date                   : 2017:01:31 09:20:28+05:30
Format                          : application/pdf
Title                           : Adobe FrameMaker INI Reference
Creator                         : singhsag
Producer                        : Acrobat Distiller 15.0 (Windows)
Document ID                     : uuid:07d919e8-9830-4f07-93bd-2af79dee588d
Instance ID                     : uuid:660d7690-baea-4588-860b-eb761d6f74d2
Page Mode                       : UseOutlines
Page Count                      : 76
Author                          : singhsag
</pre>
<small>EXIF Metadata provided by <a href="https://exif.tools/">EXIF.tools</a></small>

<div id="ezoic-pub-ad-placeholder-110">
<script async src="//pagead2.googlesyndication.com/pagead/js/adsbygoogle.js"></script>
<!-- usermanual link ad -->
<ins class="adsbygoogle"
     style="display:block"
     data-ad-client="ca-pub-0545639743190253"
     data-ad-slot="6172135303"
     data-ad-format="link"></ins>
<script>
(adsbygoogle = window.adsbygoogle || []).push({});
</script>
</div>
</div>
				<div id="catlinks" class="catlinks catlinks-allhidden" data-mw="interface"></div>				<div class="visualClear"></div>
							</div>
		</div>
		<div id="mw-navigation">
			<h2>Navigation menu</h2>

			<div id="mw-head">
									<div id="p-personal" role="navigation" class="" aria-labelledby="p-personal-label">
                                                 <!--                              <div id="p-search" role="search">

                                                <form action="https://usermanual.wiki/search.php" id="searchform">
                                                        <div id="simpleSearch">
                                                        <input type="search" name="search" placeholder="Search UserManual.wiki" title="Search UserManual.wiki [ctrl-option-f]" accesskey="f" id="searchInput" tabindex="1" autocomplete="off"><input type="hidden" value="Special:Search" name="title"><input type="submit" name="go" value="Go" title="Find a User Manual" id="searchButton" class="searchButton">                                                 </div>
                                                </form>
                                        </div>-->
                                                <ul>
<li id="pt-mycontris"><a href="https://usermanual.wiki/upload" title="Upload User Manual" accesskey="y">Upload a User Manual</a></li>
</ul>
					</div>
									<div id="left-navigation">
										<div id="p-namespaces" role="navigation" class="vectorTabs" aria-labelledby="p-namespaces-label">
						<h3 id="p-namespaces-label">Versions of this User Manual:</h3>
						<ul>
 <li id="ca-nstab-main"><span><a href="https://usermanual.wiki/adobe/framemaker2017inirefen.3976053481" title="User Manual Wiki" accesskey="c">Wiki Guide</a></span></li> <li id="ca-nstab-main"><span><a href="https://usermanual.wiki/adobe/framemaker2017inirefen.3976053481/html" title="HTML" accesskey="c">HTML</a></span></li> <li id="ca-nstab-main"><span><a href="https://usermanual.wiki/adobe/framemaker2017inirefen.3976053481/amp" title="Mobile AMP" accesskey="c">Mobile</a></span></li> <li id="ca-nstab-main" class="selected" ><span><a href="https://usermanual.wiki/adobe/framemaker2017inirefen.3976053481/help" title="Discussion / FAQ / Help" accesskey="c">Download & Help</a></span></li>
													</ul>
					</div>
									</div>
				<div id="right-navigation">
										<div id="p-views" role="navigation" class="vectorTabs" aria-labelledby="p-views-label">
						<h3 id="p-views-label">Views</h3>
						<ul>
													
		<li id="ca-view"><span><a href="#">User Manual</a></span></li>

                                                                                                                        <li  class="selected"  id="ca-edit"><span><a href="https://usermanual.wiki/adobe/framemaker2017inirefen.3976053481/help" title="Ask a question" accesskey="e">Discussion / Help</a></span></li>

													</ul>
					</div>
									</div>
			</div>
			<div id="mw-panel">
				<div id="p-logo" role="banner"><a class="mw-wiki-logo" href="https://usermanual.wiki/Main_Page" title="Visit the main page"></a></div>
						<div class="portal" role="navigation" id="p-navigation" aria-labelledby="p-navigation-label">
			<h3 id="p-navigation-label">Navigation</h3>

		</div>
			<div class="portal" role="navigation" id="p-tb" aria-labelledby="p-tb-label">


		</div>
				</div>
		</div>
		<div id="footer" role="contentinfo">
							<ul id="footer-info">
											<li id="footer-info-lastmod">© 2025 UserManual.wiki</li>
									</ul>
							<ul id="footer-places">
											<li id="footer-places-privacy"><a href="https://usermanual.wiki/ContactUs" title="UserManual.wiki:Contact Us">Contact Us</a></li>
											<li id="footer-places-about"><a href="https://usermanual.wiki/DMCA" title="UserManual.wiki:DMCA">DMCA</a></li>
									</ul>
										<ul id="footer-icons" class="noprint">
											<li id="footer-poweredbyico">

</li>
									</ul>

		</div>

</div></body></html>
<script src="/cdn-cgi/scripts/7d0fa10a/cloudflare-static/rocket-loader.min.js" data-cf-settings="f06201166c873d55d8ac97f4-|49" defer></script>