Avid Media | Distribute Installation And Configuration Guide 2.4 ICG 2 4 EN

User Manual: avid Avid Media Distribute - 2.4 - Installation and Configuration Guide Free User Guide for Avid Media Distribute Software, Manual

Open the PDF directly: View PDF .
Page Count: 148 [warning: Documents this large are best viewed by clicking the View PDF Link!]

Title Page
Contents
Using This Guide
Installation for Media | Distribute
Configuration for Media | Distribute
Configuring System Accounts for Media | Distribute
Configuring User Profiles for Media | Distribute
- Configuring a User Profile for a Personal Twitter Account
- Configuring a User Profile for a Personal Facebook Account
Media | Distribute Checklist
Working with Media | Distribute Logs
Modifying the Transcoder Monitoring Interval
Modifying the Settings for Interlaced Graphics
Index

Media | Distribute

Installation and Configuration Guide

Version 2.4

Legal Notices

Product specifications are subject to change without notice and do not represent a commitment on the part of Avid Technology, Inc.

This product is subject to the terms and conditions of a software license agreement provided with the software. The product may

only be used in accordance with the license agreement.

This product may be protected by one or more U.S. and non-U.S patents. Details are available at www.avid.com/patents.

This document is protected under copyright law. An authorized licensee of Media | Distribute may reproduce this publication for the

licensee’s own use in learning how to use the software. This document may not be reproduced or distributed, in whole or in part, for

commercial purposes, such as selling copies of this document or providing support or educational services to others. This document

is supplied as a guide for [product name]. Reasonable care has been taken in preparing the information it contains. However, this

document may contain omissions, technical inaccuracies, or typographical errors. Avid Technology, Inc. does not accept

responsibility of any kind for customers’ losses due to the use of this document. Product specifications are subject to change without

notice.

This product includes FFmpeg, which is covered by the GNU Lesser General Public License.

This product includes software that is based in part of the work of the FreeType Team.

This software is based in part on the work of the Independent JPEG Group.

This product includes libjpeg-turbo, which is covered by the wxWindows Library License, Version 3.1.

P41-RR02188 by the National Institutes of Health.

1997, 1998, 1999, 2000, 2001, 2002, Thomas G. Lane. This software is based in part on the work of the Independent JPEG Group.

Johan Van den Brande.

Permission has been granted to copy, distribute and modify gd in any context without fee, including a commercial application,

provided that this notice is present in user-accessible supporting documentation.

This does not affect your ownership of the derived work itself, and the intent is to assure proper credit for the authors of gd, not to

interfere with your productive use of gd. If you have questions, ask. "Derived works" includes all programs that utilize the library.

Credit must be given in user-accessible documentation.

This software is provided "AS IS." The copyright holders disclaim all warranties, either express or implied, including but not limited to

implied warranties of merchantability and fitness for a particular purpose, with respect to this code and accompanying

documentation.

Although their code does not appear in gd, the authors wish to thank David Koblas, David Rowley, and Hutchison Avenue Software

Corporation for their prior contributions.

This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)

Reserved. OpenLDAP is a registered trademark of the OpenLDAP Foundation.

Media | Distribute enables its users to access certain YouTube functionality, as a result of Avid's licensed use of YouTube's API. The

charges levied by Avid for use of Media | Distribute are imposed by Avid, not YouTube. YouTube does not charge users for accessing

YouTube site functionality through the YouTube APIs.

Media | Distribute uses the bitly API, but is neither developed nor endorsed by bitly.

Android is a trademark of Google Inc.

The following disclaimer is required by Apple Computer, Inc.:

APPLE COMPUTER, INC. MAKES NO WARRANTIES WHATSOEVER, EITHER EXPRESS OR IMPLIED, REGARDING THIS

PRODUCT, INCLUDING WARRANTIES WITH RESPECT TO ITS MERCHANTABILITY OR ITS FITNESS FOR ANY PARTICULAR

PURPOSE. THE EXCLUSION OF IMPLIED WARRANTIES IS NOT PERMITTED BY SOME STATES. THE ABOVE EXCLUSION

MAY NOT APPLY TO YOU. THIS WARRANTY PROVIDES YOU WITH SPECIFIC LEGAL RIGHTS. THERE MAY BE OTHER

RIGHTS THAT YOU MAY HAVE WHICH VARY FROM STATE TO STATE.

The following disclaimer is required by Sam Leffler and Silicon Graphics, Inc. for the use of their TIFF library:

Permission to use, copy, modify, distribute, and sell this software [i.e., the TIFF library] and its documentation for any purpose is

hereby granted without fee, provided that (i) the above copyright notices and this permission notice appear in all copies of the

software and related documentation, and (ii) the names of Sam Leffler and Silicon Graphics may not be used in any advertising or

publicity relating to the software without the specific, prior written permission of Sam Leffler and Silicon Graphics.

THE SOFTWARE IS PROVIDED “AS-IS” AND WITHOUT WARRANTY OF ANY KIND, EXPRESS, IMPLIED OR OTHERWISE,

INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT OR

CONSEQUENTIAL DAMAGES OF ANY KIND, OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR

PROFITS, WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF LIABILITY, ARISING

OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

The following disclaimer is required by the Independent JPEG Group:

This software is based in part on the work of the Independent JPEG Group.

This Software may contain components licensed under the following conditions:

Redistribution and use in source and binary forms are permitted provided that the above copyright notice and this paragraph are

duplicated in all such forms and that any documentation, advertising materials, and other materials related to such distribution and

use acknowledge that the software was developed by the University of California, Berkeley. The name of the University may not be

used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS

PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE

IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby

granted, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice

appear in supporting documentation. This software is provided "as is" without express or implied warranty.

Permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby

granted, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice

appear in supporting documentation. This software is provided "as is" without express or implied warranty.

Permission to use, copy, modify, distribute, and sell this software for any purpose is hereby granted without fee, provided that the

above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting

documentation, and that the name of Daniel Dardailler not be used in advertising or publicity pertaining to distribution of the software

without specific, written prior permission. Daniel Dardailler makes no representations about the suitability of this software for any

purpose. It is provided "as is" without express or implied warranty.

Permission to use, copy, modify, and distribute this software for any purpose without fee is hereby granted, provided that this entire

notice is included in all copies of any software which is or includes a copy or modification of this software and in all copies of the

supporting documentation for such software.

THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT ANY EXPRESS OR IMPLIED WARRANTY. IN PARTICULAR,

NEITHER THE AUTHOR NOR AT&T MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND CONCERNING THE

MERCHANTABILITY OF THIS SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR PURPOSE.

This product includes software developed by the University of California, Berkeley and its contributors.

The following disclaimer is required by Nexidia Inc.:

trademarks are the property of their respective owners. All Nexidia materials regardless of form, including without limitation,

software applications, documentation and any other information relating to Nexidia Inc., and its products and services are the

exclusive property of Nexidia Inc. or its licensors. The Nexidia products and services described in these materials may be covered

by Nexidia's United States patents: 7,231,351; 7,263,484; 7,313,521; 7,324,939; 7,406,415, 7,475,065; 7,487,086 and/or other

patents pending and may be manufactured under license from the Georgia Tech Research Corporation USA.

The following disclaimer is required by Paradigm Matrix:

Portions of this software licensed from Paradigm Matrix.

The following disclaimer is required by Ray Sauers Associates, Inc.:

“Install-It” is licensed from Ray Sauers Associates, Inc. End-User is prohibited from taking any action to derive a source code

equivalent of “Install-It,” including by reverse assembly or reverse compilation, Ray Sauers Associates, Inc. shall in no event be liable

for any damages resulting from reseller’s failure to perform reseller’s obligation; or any damages arising from use or operation of

reseller’s products or the software; or any other damages, including but not limited to, incidental, direct, indirect, special or

consequential Damages including lost profits, or damages resulting from loss of use or inability to use reseller’s products or the

software for any reason including copyright or patent infringement, or lost data, even if Ray Sauers Associates has been advised,

knew or should have known of the possibility of such damages.

The following disclaimer is required by Videomedia, Inc.:

“Videomedia, Inc. makes no warranties whatsoever, either express or implied, regarding this product, including warranties with

respect to its merchantability or its fitness for any particular purpose.”

“This software contains V-LAN ver. 3.0 Command Protocols which communicate with V-LAN ver. 3.0 products developed by

Videomedia, Inc. and V-LAN ver. 3.0 compatible products developed by third parties under license from Videomedia, Inc. Use of this

software will allow “frame accurate” editing control of applicable videotape recorder decks, videodisc recorders/players and the like.”

The following disclaimer is required by Altura Software, Inc. for the use of its Mac2Win software and Sample Source

Code:

The following disclaimer is required by Ultimatte Corporation:

Certain real-time compositing capabilities are provided under a license of such technology from Ultimatte Corporation and are

subject to copyright protection.

The following disclaimer is required by 3Prong.com Inc.:

Certain waveform and vector monitoring capabilities are provided under a license from 3Prong.com Inc.

The following disclaimer is required by Interplay Entertainment Corp.:

The “Interplay” name is used with the permission of Interplay Entertainment Corp., which bears no responsibility for Avid products.

This product includes portions of the Alloy Look & Feel software from Incors GmbH.

This product includes software developed by the Apache Software Foundation (http://www.apache.org/).

This product may include the JCifs library, for which the following notice applies:

Software directory on the installation CD.

Avid Interplay contains components licensed from LavanTech. These components may only be used as part of and in connection

with Avid Interplay.

Attn. Government User(s). Restricted Rights Legend

U.S. GOVERNMENT RESTRICTED RIGHTS. This Software and its documentation are “commercial computer software” or

“commercial computer software documentation.” In the event that such Software or documentation is acquired by or on behalf of a

unit or agency of the U.S. Government, all rights with respect to this Software and documentation are subject to the terms of the

License Agreement, pursuant to FAR §12.212(a) and/or DFARS §227.7202-1(a), as applicable.

Trademarks

003, 192 Digital I/O, 192 I/O, 96 I/O, 96i I/O, Adrenaline, AirSpeed, ALEX, Alienbrain, AME, AniMatte, Archive, Archive II, Assistant

Station, AudioPages, AudioStation, AutoLoop, AutoSync, Avid, Avid Active, Avid Advanced Response, Avid DNA, Avid DNxcel, Avid

DNxHD, Avid DS Assist Station, Avid Ignite, Avid Liquid, Avid Media Engine, Avid Media Processor, Avid MEDIArray, Avid Mojo, Avid

Remote Response, Avid Unity, Avid Unity ISIS, Avid VideoRAID, AvidRAID, AvidShare, AVIDstripe, AVX, Beat Detective, Beauty

Without The Bandwidth, Beyond Reality, BF Essentials, Bomb Factory, Bruno, C|24, CaptureManager, ChromaCurve,

ChromaWheel, Cineractive Engine, Cineractive Player, Cineractive Viewer, Color Conductor, Command|24, Command|8,

Control|24, Cosmonaut Voice, CountDown, d2, d3, DAE, D-Command, D-Control, Deko, DekoCast, D-Fi, D-fx, Digi 002, Digi 003,

DigiBase, Digidesign, Digidesign Audio Engine, Digidesign Development Partners, Digidesign Intelligent Noise Reduction,

Digidesign TDM Bus, DigiLink, DigiMeter, DigiPanner, DigiProNet, DigiRack, DigiSerial, DigiSnake, DigiSystem, Digital

Choreography, Digital Nonlinear Accelerator, DigiTest, DigiTranslator, DigiWear, DINR, DNxchange, Do More, DPP-1, D-Show, DSP

Manager, DS-StorageCalc, DV Toolkit, DVD Complete, D-Verb, Eleven, EM, Euphonix, EUCON, EveryPhase, Expander,

ExpertRender, Fader Pack, Fairchild, FastBreak, Fast Track, Film Cutter, FilmScribe, Flexevent, FluidMotion, Frame Chase, FXDeko,

HD Core, HD Process, HDpack, Home-to-Hollywood, HYBRID, HyperSPACE, HyperSPACE HDCAM, iKnowledge, Image

Independence, Impact, Improv, iNEWS, iNEWS Assign, iNEWS ControlAir, InGame, Instantwrite, Instinct, Intelligent Content

Management, Intelligent Digital Actor Technology, IntelliRender, Intelli-Sat, Intelli-sat Broadcasting Recording Manager, InterFX,

Interplay, inTONE, Intraframe, iS Expander, iS9, iS18, iS23, iS36, ISIS, IsoSync, LaunchPad, LeaderPlus, LFX, Lightning, Link &

Sync, ListSync, LKT-200, Lo-Fi, MachineControl, Magic Mask, Make Anything Hollywood, make manage move | media, Marquee,

MassivePack, Massive Pack Pro, Maxim, Mbox, Media Composer, MediaFlow, MediaLog, MediaMix, Media Reader, Media

Recorder, MEDIArray, MediaServer, MediaShare, MetaFuze, MetaSync, MIDI I/O, Mix Rack, Moviestar, MultiShell, NaturalMatch,

NewsCutter, NewsView, NewsVision, Nitris, NL3D, NLP, NSDOS, NSWIN, OMF, OMF Interchange, OMM, OnDVD, Open Media

Framework, Open Media Management, Painterly Effects, Palladium, Personal Q, PET, Podcast Factory, PowerSwap, PRE,

ProControl, ProEncode, Profiler, Pro Tools, Pro Tools|HD, Pro Tools LE, Pro Tools M-Powered, Pro Transfer, QuickPunch,

QuietDrive, Realtime Motion Synthesis, Recti-Fi, Reel Tape Delay, Reel Tape Flanger, Reel Tape Saturation, Reprise, Res Rocket

Surfer, Reso, RetroLoop, Reverb One, ReVibe, Revolution, rS9, rS18, RTAS, Salesview, Sci-Fi, Scorch, ScriptSync,

SecureProductionEnvironment, Serv|GT, Serv|LT, Shape-to-Shape, ShuttleCase, Sibelius, SimulPlay, SimulRecord, Slightly Rude

Compressor, Smack!, Soft SampleCell, Soft-Clip Limiter, SoundReplacer, SPACE, SPACEShift, SpectraGraph, SpectraMatte,

SteadyGlide, Streamfactory, Streamgenie, StreamRAID, SubCap, Sundance, Sundance Digital, SurroundScope, Symphony, SYNC

HD, SYNC I/O, Synchronic, SynchroScope, Syntax, TDM FlexCable, TechFlix, Tel-Ray, Thunder, TimeLiner, Titansync, Titan, TL

Aggro, TL AutoPan, TL Drum Rehab, TL Everyphase, TL Fauxlder, TL In Tune, TL MasterMeter, TL Metro, TL Space, TL Utilities,

tools for storytellers, Transit, TransJammer, Trillium Lane Labs, TruTouch, UnityRAID, Vari-Fi, Video the Web Way, VideoRAID,

VideoSPACE, VTEM, Work-N-Play, Xdeck, X-Form, Xmon and XPAND! are either registered trademarks or trademarks of Avid

Technology, Inc. in the United States and/or other countries.

Media | Distribute Installation and Configuration Guide • Created 10/2/15 • This document is distributed by Avid in

online (electronic) form only, and is not available for purchase in printed form.

Contents

Using This Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Chapter 1 Installation for Media | Distribute. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Installing and Upgrading Media | Distribute in a Cluster Environment . . . . . . . . . . . 10

Identifying the Master and Non-Master Nodes. . . . . . . . . . . . . . . . . . . . . . . . . . 11

Identifying the Virtual Cluster IP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Installing and Upgrading Media | Distribute . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Configuring Media | Distribute on the Master Node . . . . . . . . . . . . . . . . . . . . . . 16

Configuring the Media | Distribute Installation on Non-Master Nodes . . . . . . . . 18

Restarting PostgreSQL Service and Verifying the Cluster Installation. . . . . . . . 20

Installing and Upgrading Media | Distribute on a Single Server . . . . . . . . . . . . . . . . 20

Installing and Upgrading Media | Distribute on a Server . . . . . . . . . . . . . . . . . . 21

Modifying Media | Distribute to Work with a Proxy Server . . . . . . . . . . . . . . . . . . . . 24

Removing Media | Distribute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Chapter 2 Configuration for Media | Distribute . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Verifying Your Media | Distribute Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Assigning Media | Distribute Roles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

MediaCentral | UX Security for Media | Distribute. . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Configuring the Transcode Route . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Configuring MediaCentral | UX for Media | Distribute. . . . . . . . . . . . . . . . . . . . . 38

Configuring the Video Transcoding Host . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Send to Playback Configuration for Media | Distribute. . . . . . . . . . . . . . . . . . . . 45

Configuring a Telestream Vantage Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Validating the Vantage Transcode Route Configuration . . . . . . . . . . . . . . . . . . 52

Configuring the Harmonic ProMedia Carbon Transcoder . . . . . . . . . . . . . . . . . 57

Configuring a RadiantGrid Profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Chapter 3 Configuring System Accounts for Media | Distribute . . . . . . . . . . . . . . 64

Configuring the Bitly Link-Shortening Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Configuring a Twitter Publication Account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Configuring a Facebook Publication Account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Configuring a Facebook Page Publication Account . . . . . . . . . . . . . . . . . . . . . . . . . 78

Configuring a Vimeo Publication Account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Configuring a YouTube Publication Account. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

Configuring a YouTube v3 Publication Account . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

Configuring a Brightcove Account. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

Configuring a Kaltura Account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100

Configuring an Ooyala Account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

Configuring an Atex Polopoly Web CMS Account . . . . . . . . . . . . . . . . . . . . . . . . . 105

Configuring a WorldNow Web CMS Profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107

Configuring thePlatform Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113

Configuring a WordPress CMS Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115

Configuring an InternetBroadcasting CMS Profile . . . . . . . . . . . . . . . . . . . . . . . . . 117

Configuring a Generic CMS Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119

Configuring a Generic OVP Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124

Chapter 4 Configuring User Profiles for Media | Distribute . . . . . . . . . . . . . . . . . 127

Configuring a User Profile for a Personal Twitter Account . . . . . . . . . . . . . . . . . . . 128

Configuring a User Profile for a Personal Facebook Account. . . . . . . . . . . . . . . . . 130

Appendix A Media | Distribute Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132

Appendix B Working with Media | Distribute Logs . . . . . . . . . . . . . . . . . . . . . . . . . . 141

Appendix C Modifying the Transcoder Monitoring Interval . . . . . . . . . . . . . . . . . . . 143

Appendix D Modifying the Settings for Interlaced Graphics . . . . . . . . . . . . . . . . . . 145

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146

Using This Guide

This guide is intended for users of MediaCentral | UX with the Media | Distribute feature. This

guide describes the installation and configuration procedures for Media Distribute, such as

installing the Media Distribute software and configuring system accounts.

For information on using the publishing features of Media Distribute, see the Media | Distribute

User’s Guide or the MediaCentral | UX Help. For administrative information for

MediaCentral | UX, see the Avid MediaCentral | UX Administration Guide.

1Installation for Media | Distribute

The supported configuration for Media Distribute requires you to install Media Distribute on

your MediaCentral | UX server, which is part of your MediaCentral configuration. For

installation information, see the Avid MediaCentral Platform Services Installation and

Configuration Guide.

Before you install Media Distribute, you must install and configure your MediaCentral server. If

you plan to process video or to use a content management system (CMS) account profile, you

must also install the Interplay Web Services. See “Installing Software for Interplay Web

Services” in the Interplay | Production Software Installation and Configuration Guide.

The Media Distribute installation procedures assume you have installed Avid MediaCentral

Platform Services (MCS). You must extract the Media Distribute installation package from

Media_Distribute_[version]Build[xx]_Linux.tar.gz. You run the installation file itself from a

shell script called install.sh. This installs the plug-in needed for MediaCentral UX to access the

Media Distribute functionality, as well as the avid-mpd service which provides the functionality

for Media Distribute workflows.

The procedures for installing Media Distribute depend on whether you install the application

components in a cluster environment or on a single MediaCentral server.

• If you deploy MCS and components on a master node and one or more non-master nodes in

a cluster configuration, see “Installing and Upgrading Media| Distribute in a Cluster

Environment” on page 10.

• If you deploy all MCS and components on a single server, see “Installing and Upgrading

Media | Distribute on a Single Server” on page 20.

If necessary for security considerations, you can configure Media Distribute to communicate

with the Internet through a proxy server. For more information, see “Modifying

Media | Distribute to Work with a Proxy Server” on page 24.

The following installed components are necessary for the current version of Media Distribute:

• Avid MediaCentral Platform Services v2.4.x (if you work with a cluster configuration, you

need to ensure that all nodes in the cluster function properly)

• iNEWS 3.4.3 or later (for MCS configurations with iNEWS

• Avid ISIS v4.7.4 driver (v4.7.6 with MCS v2.4.1)

Installing and Upgrading Media | Distribute in a Cluster Environment

• Red Had Enterprise Linux (RHEL) v6.5

• Avid Interplay Web Services

• MediaCentral Distribution Service

You also need to ensure that the following are available for Media Distribute:

• Interplay Media Services Engine

• Interplay Transfer engine

• At least one installed transcode provider

• STP encoder

• Internet connection for publishing to social media sites

Installing and Upgrading Media | Distribute in a

Cluster Environment

The procedures in this section assume you have already installed and configured your

MediaCentral Platform Services on your clustered servers. For more information on configuring

a MediaCentral cluster environment, see the Avid MediaCentral Platform Services Installation

and Configuration Guide. To configure Media Distribute, you require the following:

• RHEL and MediaCentral software components are installed on all servers in the cluster.

• All servers are set up and configured correctly for the cluster.

• Failover processes work correctly.

Installing Media Distribute entails the following steps:

• Copying the Media Distribute installation files to a USB drive.

• Identifying the master and non-master nodes in your configuration, and identifying the

virtual cluster IP address (see “Identifying the Master and Non-Master Nodes” on page 11

and “Identifying the Virtual Cluster IP” on page 11).

•Installing Media Distribute on the master and all non-master nodes in your cluster

configuration.

• Setting up the Media Distribute database on the master node of the cluster. You must install

Media Distribute on all nodes, but you only configure the database once.

• Modifying the MCS configuration file to change the host address to the virtual cluster IP of

the cluster.

After you have installed and configured Media Distribute on your master and non-master nodes,

you need to restart some MediaCentral Platform and Media Distribute services.

Installing and Upgrading Media | Distribute in a Cluster Environment

If you need to remove Media Distribute, see “Removing Media | Distribute” on page 26.

For installation procedures, see the following topics:

•“Installing and Upgrading Media | Distribute” on page 13

•“Configuring Media | Distribute on the Master Node” on page 16

•“Configuring the Media | Distribute Installation on Non-Master Nodes” on page 18

The Media Distribute software installation package file

(Media_Distribute_[version]Build[xx]_Linux.tar.gz) is available to Avid Support representatives

only and can be downloaded from the Avid Gold Build repository.

To prepare and mount a USB drive for Media Distribute installation:

1. On a Windows system, format a USB drive as a FAT32 volume.

2. Get the Media Distribute installation package file

(Media_Distribute_[version]Build[xx]_Linux.tar.gz) from your Avid representative.

3. Copy the compressed installation file to the USB drive.

4. Remove the USB device from the Windows system.

Identifying the Master and Non-Master Nodes

You can use the cluster resource monitoring command, crm, to verify which server functions as

the master node and which as the non-master nodes.

To identify the master and non-master nodes, do the following:

tLog in to any node in the cluster as root and open the cluster resource monitoring utility by

typing the following:

crm resource status

The status of all cluster-related services on all nodes displays in the terminal window.

The master and non-master nodes are indicated as the Master/Slave Set — for example:

Master/Slave Set: ms_drbd_postgres [drbd_postgres]

Masters: [ morpheus-hp1 ]

Slaves: [ morpheus-hp2 ]

Identifying the Virtual Cluster IP

Some configuration files used in the configuration of your Media Distribute installation require

the virtual cluster IP. This is required for the correct configuration of the Media Distribute

service in a cluster installation.

Installing and Upgrading Media | Distribute in a Cluster Environment

To identify the virtual cluster IP:

tLog in to the master node of the cluster and type the following command:

ifconfig

The following is a example of the output of a typical network interface configuration:

The virtual cluster IP is the IP assigned to the 'eth0:c10' network adapter. In this example,

the virtual cluster IP is 172.24.18.61.

eth0 Link encap:Ethernet HWaddr 00:26:55:E6:83:E1

inet addr:172.24.18.163 Bcast:172.24.18.255 Mask:255.255.255.0

inet6 addr: fe80::226:55ff:fee6:83e1/64 Scope:Link

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

RX packets:4321802 errors:0 dropped:0 overruns:0 frame:0

TX packets:3628475 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:1374391088 (1.2 GiB) TX bytes:1086706641 (1.0 GiB)

eth0:cl0 Link encap:Ethernet HWaddr 00:26:55:E6:83:E1

inet addr:172.24.18.61 Bcast:172.24.18.189 Mask:255.255.255.255

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

Interrupt:38 Memory:fbde0000-fbe00000

lo Link encap:Local Loopback

inet addr:127.0.0.1 Mask:255.0.0.0

inet6 addr: ::1/128 Scope:Host

UP LOOPBACK RUNNING MTU:16436 Metric:1

RX packets:7331022 errors:0 dropped:0 overruns:0 frame:0

TX packets:7331022 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:0

RX bytes:8040287442 (7.4 GiB) TX bytes:8040287442 (7.4 GiB)

Installing and Upgrading Media | Distribute in a Cluster Environment

Installing and Upgrading Media | Distribute

If you install Media Distribute in a cluster environment, you must install it first on the master

node of the cluster since the database service runs on this node. The installation includes creating

a database for the Media Distribute service. This can only be done on the node with the running

PostgreSQL service. After you install the application on the master node, you must install

Media Distribute on all non-master nodes.

The procedure for upgrading Media Distribute is similar to the one you used initially to install

Media Distribute. The upgrade procedure overwrites some configuration files. You can restore

these files by using the backup configuration files already in your configuration once the upgrade

completes.

nWhen you upgrade your version of Media Distribute, all system and user settings are saved. You

do not need to create new settings, but if the newer version includes new features, you might need

to modify your settings to activate the features. For a list of new features, see the ReadMe

documentation that came with your version of MediaCentral UX. For information on setting up

account profiles, see “Configuring System Accounts for Media | Distribute” on page 64.

cThe Media Distribute installation, upgrade, and configuration disconnects all users logged

in to MediaCentral UX when it restarts some services. Ensure that all users save their

sessions and log off during the installation or upgrade procedures.

To install or upgrade Media Distribute:

1. Insert the Media Distribute installation USB drive into the server.

2. Verify the name of the device by typing the following command:

dmesg

Linux information relating to hardware appears on the screen.

Information for the USB device appears near the end of the output, near the list of SCSI

devices. The name of the USB device is found inside square brackets (e.g., sdc). This is the

name you use to mount the device.

3. Create a mount point for the USB device by typing the following:

mkdir /media/usb

4. Mount the USB key at the mount point you just created:

mount -t vfat /dev/sdc<?> /media/usb

nThe name of the USB device (sdc, in this case) takes a 1 (one) in the mount command. This

simply indicates a partition exists on the USB device. Formatting the USB device in Windows

created the partition.

The USB device is now mounted and available for use.

Installing and Upgrading Media | Distribute in a Cluster Environment

5. Verify the USB key has been mounted:

df -h

Information displays about all mounted file systems and devices, including information

about the USB device, similar to the following:

6. Unpack the Media Distribute installation file by typing the following command:

tar -xzf /media/usb/Media_Distribute_[version]Build[xx]_Linux.tar.gz

The compressed file extracts to a subfolder within the target directory called

Media_Distribute_[version]_Build_[xx]_Linux.

7. Navigate to the installation directory:

cd Media_Distribute_[version]_Build_[xx]_Linux

8. Run the installation script:

./install.sh

nFor master node installations, a default user in the PostgreSQL database is created with a user

name of

mpduser

and a password of

resudpm

. The necessary database tables and schema in

PostgreSQL database are also created.

9. Follow the prompts to install Media Distribute.

nDuring installation on non-master nodes, you might see a message; “Not running a database PG

on localhost. Please enter IP of database server.” If you see this message, press Enter. You do not

need to provide an IP address for your database server when installing Media Distribute on a

non-master node.

10. Type the following to open the MediaCentral Configurator, and then ensure that the Media

Distribute plug-in is enabled within the Configurator:

/opt/avid/avid-interplay-central/configurator

When the MediaCentral Configurator completes, a dialog box opens.

File system Size Used Avail Use % Mounted on

/dev/sdc1 7.5 G 4.5 G 3.0 G 61 % /media/usb

Installing and Upgrading Media | Distribute in a Cluster Environment

11. Press Enter to select No.

The Configurator closes.

12. To restart the MediaCentral service, type the following command:

crm resource restart AvidIPC

nWhen you restart the services, all users currently logged on to MediaCentral UX are logged out.

Restarting the services might take up to a minute.

13. (Master node only) To verify the version of Media Distribute installed on a master node,

type the following command:

/usr/share/apache-servicemix/bin/mpd_version

The command returns the installed versions of ServiceMix and Media Distribute. For

example:

ServiceMix Version: 4.5.1

MPD Version: 2.3.0.20150122_114231

MPD UI Version: 2.3.0.20150122_114231

14. (Master node only) To verify the ServiceMix installation on a master node, do the following:

a. Type the following

ssh Administrator@localhost -p 8101

b. Type

yes

to continue connecting to the host, and then type the default password

avid

c. Type

list

, and press Enter.

All account endpoints display as “Active” and the Social Media Integration route

displays as “Started.”

nIf not all endpoints are active or if the Social Media Integration route is not started, ServiceMix

might not have completed restarting. You can wait a moment and then retry these steps.

Installing and Upgrading Media | Distribute in a Cluster Environment

d. To quit ServiceMix, type

logout

15. To remove the installation files and unmount the USB drive, do the following:

a. Type

cd /

to ensure you are not currently on the USB key by changing to the root

directory.

b. Type the following:

rm -rf [target_directory]

umount /media/usb

c. Remove the USB drive from the server.

Configuring Media | Distribute on the Master Node

After you install Media Distribute, you must edit several configuration and property files and

restart services on the master cluster node before you can use Media Distribute. For Media

Distribute upgrades, you need to move the existing configuration files.

Once you configure Media Distribute on the master and non-master nodes, you must perform a

failover operation to restart the PostgreSQL service and validate the mpduser configuration. For

more information, see “Restarting PostgreSQL Service and Verifying the Cluster Installation” on

page 20.

To configure PostgreSQL to allow remote hosts access to the Media Distribute database:

1. Using Linux commands, navigate to the directory containing the PostgreSQL database

configuration file:

cd /mnt/drbd/postgres_data

2. Using the Linux text editor, vi, open the pg_hba.conf file for editing:

vi pg_hba.conf

3. Type

to go to the last line of the file, and then Type

(lower case “i”) to enter insert mode.

4. Add the following to the last line:

host mpd mpduser 0.0.0.0/0 trust

5. Press the Escape key to return to command mode, then type

:wq

and press Return to write

and quit the text editor.

To configure the User Management Service (UMS) properties file (new installation only):

1. Using Linux commands, navigate to the directory containing the UMS properties file:

cd /usr/share/apache-servicemix/config

2. Using the Linux text editor, vi, open the application.properties file for editing:

vi application.properties

Installing and Upgrading Media | Distribute in a Cluster Environment

3. Navigate using the arrow keys to the next line:

com.avid.mpd.uls.host.retriever=application.properties

4. If the line is commented with a

character, type

(lower case “i”) to enter insert mode,

Place the cursor over the

character and type

to delete the character and uncomment the

line.

5. Navigate using the arrow keys to the line containing the parameter for

com.avid.osgi.uls.host

6. Type a valid UMS REST address.

The default value is

https://localhost:10443/ws/rest

. Use the virtual cluster IP

address as the host for this configuration file — for example, type

https://123.45.67.89:10443/ws/rest

7. Press the Escape key to return to command mode, then type

:wq

and press Return to write

and quit the text editor.

To configure PostgreSQL to allow remote hosts access to the Media Distribute database

(new installation only):

1. Navigate to the directory containing the Media Distribute database configuration file:

cd /etc/apache-servicemix

2. Using the Linux text editor, vi, open the avid-mpd-wrapper.conf file for editing:

vi avid-mpd-wrapper.conf

3. Locate the following line, and then navigate using the arrow keys and place the cursor on top

of the # (comment indicator):

# set.default.DB_HOST=hostname or IP

4. Type

(lower case “i”) to enter insert mode, and then use the arrow keys and backspace to

erase the

(comment indicator).

5. Delete the

hostname or IP

value at the end of the line, and then replace it by typing the

virtual cluster IP address — for example,

set.default.DB_HOST=123.45.67.89

6. Press the Escape key to return to command mode, then type

:wq

and press Return to write

and quit the text editor.

To modify the MCS configuration file (new installation only):

1. Using Linux commands, navigate to the directory containing the MediaCentral

configuration file:

/etc/apache-servicemix

2. Using the Linux text editor, vi, open the

com.avid.acs.bus.broker.rabbitmq.RabbitMqBusAccessFactory.cfg file for editing:

vi com.avid.acs.bus.broker.rabbitmq.RabbitMqBusAccessFactory.cfg

3. Navigate using the arrow keys to the line containing the parameter for

brokerConnectURL

Installing and Upgrading Media | Distribute in a Cluster Environment

4. Type

(lower case “i”) to enter insert mode, and then type a valid URL for the MediaCentral

connection.

The default value is

amqp://localhost/acs

. Use the virtual cluster IP address as the host

for this configuration file — for example,

amqp://123.45.67.89/acs

5. Press the Escape key to return to command mode, then type

:wq

and press Return to write

and quit the text editor.

6. To restart the Media Distribute service, type the following command:

service avid-mpd clean-restart

To restore and move the Servicemix configuration files (upgraded systems only):

tFor Media Distribute upgrades, restore the Servicemix configuration files by doing the

following:

a. Type the following to navigate to the Servicemix directory:

cd /etc/apache-servicemix/

b. Type the following commands to restore the backup configuration files:

mv avid-mpd-wrapper.conf.rpmsave avid-mpd-wrapper.conf

com.avid.acs.bus.broker.rabbitmq.RabbitMqBusAccessFactory.cfg.rpmsav

e com.avid.acs.bus.broker.rabbitmq.RabbitMqBusAccessFactory.cfg

Configuring the Media | Distribute Installation on Non-Master Nodes

After you install or upgrade Media Distribute (see “Installing and Upgrading Media | Distribute”

on page 13), you must edit several configuration and property files and restart services on all

non-master nodes in your cluster before you can use Media Distribute. Since the edited

configuration and property files are identical to the ones you edited on the master node, you can

copy those files to the non-master nodes.

To copy the edited Media Distribute files from the master to the non-master nodes:

1. Log in to your non-master node server using the root account.

2. Open a Linux terminal window, and then type the following commands:

scp root@[hostname]:/etc/apache-servicemix/avid-mpd-wrapper.conf

/etc/apache-servicemix/

scp root@[hostname]:/etc/apache-servicemix/

com.avid.acs.bus.broker.rabbitmq.RabbitMqBusAccessFactory.cfg

/etc/apache-servicemix/

scp root@[hostname]:/usr/share/apache-servicemix/config/

application.properties /usr/share/apache-servicemix/config/

Installing and Upgrading Media | Distribute in a Cluster Environment

n[hostname] is the host name of your master node.

The terminal window displays the following message:

The authenticity of host '[hostname (IP address)]' can't be established.

RSA key fingerprint is [fingerprint alphanumerical id].

Are you sure you want to continue connecting (yes/no)?

3. Type

yes

The terminal window displays the following message:

Warning: Permanently added '[hostname, IP address]' (RSA) to the list of

known hosts.

4. If prompted for a password, type the password for your root user account.

The edited files are copied to the non-master node.

5. To restart the Media Distribute service, type the following command:

service avid-mpd clean-restart

To verify the ServiceMix installation, do the following:

1. Type the following

ssh Administrator@localhost -p 8101

2. Type

yes

to continue connecting to the host, and then type the default password

avid

3. Type

list

, and press Enter.

All account endpoints display as “Active” and the Social Media Integration route displays as

“Started.”

4. To quit ServiceMix, type

logout

Installing and Upgrading Media | Distribute on a Single Server

Restarting PostgreSQL Service and Verifying the Cluster Installation

Before you verify your Media Distribute installation on the master and non-master nodes, you

need to perform a failover of the servers. This restarts the PostgreSQL service and validates the

mpduser. It also tests your new installation and verifies that both Media Distribute and

MediaCentral Platform Services are running properly.

To perform a failover and verify your installation:

1. Open a terminal window and log in to any non-master node in the cluster as root and check

the cluster resource status by typing the following:

crm_mon -f

The status of all cluster-related services on all nodes displays in the terminal window. The

Migration summary also displays at the bottom of the screen, which can be useful to view

errors and fail counts per node.

2. On the master node, type the following, and then press Enter:

crm node standby [master

node]

3. Monitor the cluster information displayed on the slave node as it updates its information.

As the slave node becomes the master node, it takes ownership of the PostgreSQL database.

This process takes several seconds to complete.

4. When the updated cluster is stable, type the following and press Enter:

crm node online

[master node]

The node on standby resumes the master node status.

Installing and Upgrading Media | Distribute on a

Single Server

The Media Distribute software installation package file

(Media_Distribute_[version]_Build_[xx]_Linux.tar.gz) is available to Avid Support

representatives only and can be downloaded from the Avid Gold Build repository.

To prepare and mount a USB drive for Media Distribute installation:

1. On a Windows system, format a USB drive as a FAT32 volume.

2. Get the Media Distribute installation package file

(Media_Distribute_[version]_Build_[xx]_Linux.tar.gz) from your Avid representative.

3. Copy the compressed installation file to the USB drive.

4. Remove the USB device from the Windows system.

Installing and Upgrading Media | Distribute on a Single Server

Installing and Upgrading Media | Distribute on a Server

You can install or upgrade Media Distribute on a single server The installation includes creating

a database for the Media Distribute service.

The procedure for upgrading Media Distribute is similar to the one you used initially to install

Media Distribute. If you need to remove Media Distribute, see “Removing Media | Distribute”

on page 26.

nWhen you upgrade your version of Media Distribute, all system and user settings are saved. You

do not need to create new settings, but if the newer version includes new features, you might need

to modify your settings to activate the features. For a list of new features, see the ReadMe

documentation that came with your version of MediaCentral UX. For information on setting up

account profiles, see “Configuring System Accounts for Media | Distribute” on page 64.

cThe Media Distribute installation and configuration disconnects all users logged in to

MediaCentral UX when it restarts some services. Ensure that all users save their sessions

and log off during the installation or upgrade procedures.

To install or upgrade Media Distribute:

1. Insert the Media Distribute installation USB drive into the master node server.

2. Verify the name of the device by typing the following command:

dmesg

Linux information relating to hardware appears on the screen.

Information for the USB device appears near the end of the output, near the list of SCSI

devices. The name of the USB device is found inside square brackets (e.g., sdc). This is the

name you use to mount the device.

3. Create a mount point for the USB device by typing the following:

mkdir /media/usb

4. Mount the USB key at the mount point you just created:

mount -t vfat /dev/sdc<?> /media/usb

nThe name of the USB device (sdc, in this case) takes a 1 (one) in the mount command. This

simply indicates a partition exists on the USB device. Formatting the USB device in Windows

created the partition.

The USB device is now mounted and available for use.

Installing and Upgrading Media | Distribute on a Single Server

5. Verify the USB key has been mounted:

df -h

Information displays about all mounted file systems and devices, including information

about the USB device, similar to the following:

6. Unpack the Media Distribute installation file by typing the following command:

tar -xzf /media/usb/Media_Distribute_[version]Build[xx]_Linux.tar.gz

The compressed file extracts to a subfolder within the target directory called

Media_Distribute_[version]_Build_[xx]_Linux.

7. Navigate to the installation directory:

cd Media_Distribute_[version]_Build_[xx]_Linux

8. Run the installation script:

./install.sh

nA default user in the PostgreSQL database is created with a user name of

mpduser

and a

password of

resudpm

. The necessary database tables and schema in PostgreSQL database are

also created.

9. Follow the prompts to install Media Distribute.

10. To verify the package has been installed, type the following:

/usr/share/apache-servicemix/bin/mpd_version

The output should include the following lines:

apache-servicemix.noarch 0:4.5.1-avid.el6.5

avid-mpd-[Version].[Build]-avid.el6.1.noarch.rpm

avid-media-central-mpd-[Version].[Build]-avid.el6.1.noarch.rpm

11. Type the following to open the MediaCentral Configurator, and then ensure that the Media

Distribute plug-in is enabled within the Configurator:

/opt/avid/avid-interplay-central/configurator

nWhen you exit MediaCentral Configurator, you are asked to restart the MediaCentral services.

When you restart the services, all users currently logged on to MediaCentral UX are logged out.

File system Size Used Avail Use % Mounted on

/dev/sdc1 7.5 G 4.5 G 3.0 G 61 % /media/usb

Installing and Upgrading Media | Distribute on a Single Server

12. To verify the ServiceMix installation, do the following:

a. Type the following

ssh Administrator@localhost -p 8101

b. Type

yes

to continue connecting to the host, and then type the default password

avid

c. Type

list

, and press Enter.

If the ServiceMix installation is successful, all account endpoints display as “Active”

and the Social Media Integration route displays as “Started.”

d. To quit ServiceMix, type

logout

13. To unmount the USB drive, do the following:

a. Type

cd /

to ensure you are not currently on the USB key by changing to the root

directory.

b. Type the following:

rm -rf [target_directory]

umount /media/usb

c. Remove the USB drive from the server.

Modifying Media | Distribute to Work with a Proxy Server

Modifying Media | Distribute to Work with a Proxy

Server

Media Distribute installations include an instance of ServiceMix that requires external

connectivity to the Internet — for example, to post packages to Facebook or Twitter. Both

Media Distribute and ServiceMix reside on the MediaCentral server connected to your internal

network. This might create potential security issues for certain customers. For secure

deployment considerations, you can configure Media Distribute to communicate with the

Internet through a proxy server.

Using a proxy server — such as a Squid server or any other proxy server running on another

machine in the network — allows you to restrict the ports that ServiceMix uses and the specific

Internet sites with which it communicates. This solution involves configuration changes only and

does not require changes to the existing Media Distribute installation process. After installing

Media Distribute, you need to modify the Service Mix configuration file to include the proxy

settings to ensure that all requests and responses go through the proxy server. When you restart

Media Distribute services, any ServiceMix communication is forwarded to the proxy server.

When you have configured Media Distribute to use a proxy server, you must configure the proxy

server with the following information:

• IP addresses of all ServiceMix instances, so that only data originating from Media Distribute

are allowed to the proxy server

• Social media targets for the destination domains — for example, api.twitter.com

See the documentation that came with your proxy server installation for more information on

how to configure it for proxy operation.

The following procedure describes how to modify the ServiceMix properties file. It assumes you

have set up and configured a proxy server.

To modify the ServiceMix configuration file for using Media Distribute with a proxy server:

1. Navigate to the directory containing the Media Distribute database configuration file:

cd /etc/apache-servicemix

2. Using the Linux text editor, vi, open the avid-mpd-wrapper.conf file for editing:

vi avid-mpd-wrapper.conf

3. Locate the section called Proxy configuration, and then type

(lower case “i”) to enter insert

mode.

Modifying Media | Distribute to Work with a Proxy Server

4. Locate the following lines, type

(lower case “i”) to enter insert mode, and then use the

arrow keys and backspace to erase the

(comment indicator) on all lines except those for

setting the proxy user name and proxy password (these are optional parameters):

#wrapper.java.additional.n=-Dhttp.proxySet=true

#wrapper.java.additional.n=-Dhttp.proxyHost=<the proxy host>

#wrapper.java.additional.n=-Dhttp.proxyPort=<the proxy port>

#wrapper.java.additional.n=-Dhttp.proxyUser=<the proxy username>

#wrapper.java.additional.n=-Dhttp.proxyPassword=<the proxy password>

#wrapper.java.additional.n=-Dhttps.proxySet=true

#wrapper.java.additional.n=-Dhttps.proxyHost=<the proxy host>

#wrapper.java.additional.n=-Dhttps.proxyPort=<the proxy port>

#wrapper.java.additional.n=-Dhttps.proxyUser=<the proxy username>

#wrapper.java.additional.n=-Dhttps.proxyPassword=<the proxy password>

5. Delete the numeral variable (.n) and number the lines for which you have removed the

comment indicator.

6. Delete the <proxy host> or <proxy port> variable and then replace it by typing the

IP address of your proxy server or by typing the port configured by your proxy server for

both the HTTP and HTTPS settings.

nTypically the proxy port is 3128.

The modified configuration should look like the following example:

wrapper.java.additional.1=-Dhttp.proxySet=true

wrapper.java.additional.2=-Dhttp.proxyHost=12.345.67.89

wrapper.java.additional.3=-Dhttp.proxyPort=3128

#wrapper.java.additional.n=-Dhttp.proxyUser=<the proxy username>

#wrapper.java.additional.n=-Dhttp.proxyPassword=<the proxy password>

wrapper.java.additional.4=-Dhttps.proxySet=true

wrapper.java.additional.5=-Dhttps.proxyHost=12.345.67.89

wrapper.java.additional.6=-Dhttps.proxyPort=3128

#wrapper.java.additional.n=-Dhttps.proxyUser=<the proxy username>

#wrapper.java.additional.n=-Dhttps.proxyPassword=<the proxy password>

7. Press the Escape key to return to command mode, then type

:wq

and press Return to write

and quit the text editor.

Removing Media | Distribute

8. To restart the MediaCentral service, type the following command:

service avid-mpd restart

Removing Media | Distribute

If you want to remove Media Distribute, you can use the procedure described in this section. If

you need to reinstall Media Distribute, see “Installing and Upgrading Media | Distribute in a

Cluster Environment” on page 10 or “Installing and Upgrading Media | Distribute on a Single

Server” on page 20.

To remove Media Distribute on the master node:

1. To check the correct version and build numbers for your installation, type the following:

/usr/share/apache-servicemix/bin/mpd_version

The output should include the following lines:

apache-servicemix.noarch 0:4.5.1-avid.el6.5

avid-mpd-[Version].[Build]-avid.el6.1.noarch.rpm

avid-media-central-mpd-[Version].[Build]-avid.el6.1.noarch.rpm

2. Remove the Media Distribute by typing the following commands:

rpm -e avid-media-central-mpd-[Version].[Build]-avid.el6.1.noarch.rpm

rpm -e avid-mpd-[Version].[Build]-avid.el6.1.noarch.rpm

nYou can copy the lines from the output in the previous step and paste them after the

rpm -e

command.

3. To restart the MediaCentral services, type the following commands:

tFor cluster configurations:

crm resource restart AvidIPC

tFor single-node systems:

service avid-interplay-central restart

nWhen you remove Media Distribute, the Media Distribute Producer role remains in

MediaCentral UX.

2Configuration for Media | Distribute

Before you use Avid Media Distribute to publish your content to multiple channels and devices,

you need to configure MediaCentral | UX for each platform or service you want to use for

publishing. This allows you to link your media packages and iNEWS stories with distribution to

the Web and to social media outlets and helping you to automate file preparation and

transcoding.

Before you configure your system accounts, you need to need to configure MediaCentral UX for

Media Distribute. For more information, see the following topics:

•“Assigning Media | Distribute Roles” on page 28

•“Configuring the Transcode Route” on page 36

You can then configure your system and user accounts for Media Distribute:

•“Configuring System Accounts for Media | Distribute” on page 64

•“Configuring User Profiles for Media | Distribute” on page 127

Once you have configured your platforms and services, users can log in to MediaCentral UX and

start working with the application. For more information on using MediaCentral UX, see the

Avid MediaCentral UX User’s Guide.

Verifying Your Media | Distribute Installation

Before you start to configure Media Distribute, you can test your installation to verify that all

Media Distribute components are functioning correctly.

To verify your Media Distribute installation:

1. Sign in to MediaCentral UX as an administrator.

2. Click the Layout selector and select Media Distribute.

If Media Distribute has installed correctly, the following panes display in the Media

Distribute layout:

- Social Message

-Web Story

- Packages

Assigning Media | Distribute Roles

Media Distribute provides two basic roles for publishing to multiple platforms and managing the

layouts and permissions associated with them. Before you assign roles, you need to set up an

administrative account for Media Distribute. Once this administrative account appears in the

System Settings, the necessary roles are available for Media Distribute.

If your MediaCentral configuration includes iNEWS, you need to assign an Advance License to

the two Media Distribute roles before you assign these roles to users. For Interplay Production

configurations, you can use the default Basic License type for these roles.

For more information about licenses and roles, see the Avid MediaCentral | UX Administration

Guide.

When you have set up an administrative account and assigned the appropriate license type, you

can then assign either the Advance Journalist or the Media Distribute Producer role to Media

Distribute users. Only Media Distribute Producers have access to the review and approval

features in the Packages pane.

You can assign roles in two ways:

• In the Role Details pane

• In the User or Group Details pane.

If you are upgrading from Media Distribute v1.8 to v2.x, you need to add the Media Distribute

layout to the Advance Journalist role and to modify the legacy Interplay Pulse Producer role.

To set up an administrative account for Media Distribute:

1. Sign in to MediaCentral UX as an administrator.

2. Select System Settings from the Layout selector.

The System Settings layout opens.

Assigning Media | Distribute Roles

3. In the Settings pane select Media Distribute > Profiles.

The Settings pane displays the settings in that group.

4. Click the Publication Type menu and select IPC.

5. Click the + (plus) button in the Details section.

6. Specify the required settings:

- Profile Name (type a descriptive name for your administrative profile)

- Administrative Username

- Administrative Password

7. Click Verify Profile Settings to validate the profile settings.

If your profile is valid, a message displays: “Profile configurations is valid.” If any settings

are incorrect, a message displays and indicates which fields are incorrect. All invalid settings

names change to red.

nThe setting, “Transform iNEWS stories to lower case,” applies only to Media Distribute

accounts that publish packages containing iNEWS stories. The option does not affect this setting.

8. Click Apply to save the profile.

The profile displays in the Details section with the new information.

If you are editing a profile, click Revert to return to the original settings. If you want to

delete a profile, select the profile and click the minus (-) button in the Details section.

Assigning Media | Distribute Roles

To assign an Advance License to the Media Distribute roles in the Role Details pane

(iNEWS configurations only):

1. Select Users from the Layout selector.

2. In the Roles pane, double-click either Advance Journalist or Media Distribute Producer to

assign to a user or group.

Information about the role is displayed in the Details pane.

3. In the Details pane, select Advance License as the License Type for the following roles:

- Advance Journalist

- Media Distribute Producer

4. Click Apply to save your changes or click Revert to cancel your changes.

To assign a Media Distribute role to a user in the Role Details pane:

1. Select Users from the Layout selector.

2. In the Roles pane, double-click either Advance Journalist or Media Distribute Producer to

assign to a user or group.

Information about the role is displayed in the Details pane.

3. Click the User Tree pane.

Assigning Media | Distribute Roles

4. Select the user or group to which you which you want to assign the role and drag it to the

Users and Groups by MediaCentral Zone section of the Details pane.

MediaCentral UX User Settings, with the User Tree and Roles panes.

5. Click Apply to save your changes or click Revert to cancel your changes.

To assign the Media Distribute layout and create the Media Distribute Producer role (for

MediaCentral UX upgrade installations only):

1. Select Users from the Layout selector.

2. In the Roles pane, double-click Advance Journalist.

Information about the role is displayed in the Details pane.

Assigning Media | Distribute Roles

3. In the Layouts pane, click the edit button.

The Add or Remove Layouts dialog box opens.

4. Select Media | Distribute, and then click the Close button.

5. Click Apply to save your changes or click Revert to cancel your changes.

6. In the Roles pane, double-click Interplay Pulse Producer.

Information about the role is displayed in the Details pane.

Assigning Media | Distribute Roles

7. Modify the role name in the Role Name text box by typing the following:

Media Distribute Producer

8. Modify the description in the Description text box by typing the following:

Media Distribute Producer

9. In the Layouts pane, click the edit button.

The Add or Remove Layouts dialog box opens.

10. Select Media | Distribute, and then click the Close button.

11. Click Apply to save your changes or click Revert to cancel your changes.

To assign a role in the User or Group Details pane (iNEWS configuration only):

1. Select Users from the Layout selector.

2. In the Roles pane, double-click either Advance Journalist or Media Distribute Producer to

assign to a user or group.

Information about the role is displayed in the Details pane.

3. Click the User Tree pane.

MediaCentral | UX Security for Media | Distribute

4. Select the user or group to which you which you want to assign the role and drag it to the

Users and Groups by MediaCentral Zone section of the Details pane.

MediaCentral UX User Settings, with the User Tree and Roles panes.

5. Click Apply to save your changes or click Revert to cancel your changes.

MediaCentral | UX Security for Media | Distribute

A MediaCentral client requires user login credentials in order to gain access to the underlying

functionality. All data transfer to and from the MediaCentral client (user credentials, session

information, user configuration settings, media images and files, text, and machine instructions)

are transported in a secure manner to the MediaCentral server using HTTPS protocol.

MediaCentral clients that connect through the public Internet require a virtual private network

(VPN) access to the server network. All connections pass through the VPN router/firewall

through identified ports. Once the data has passed into the “house network” it is secured using

the customer’s existing network security infrastructure.

For Media Distribute, ports are used for outgoing HTTP traffic and pass through a network

firewall. In some cases, a platform or a system account might require a separate port for outgoing

FTP data. Media Distribute does not require any ports for incoming data.

cDo not enable a firewall on the servers in your Media Distribute configuration.

MediaCentral | UX Security for Media | Distribute

The following tables list the ports used by MediaCentral UX and Media Distribute that should be

allowed through the VPN and network firewalls.

nOutbound ACLs should be used to allow packets from the MediaCentral Platform Services

(MCS) server to the MediaCentral client over “established” TCP sessions only.

VPN Firewall Port Settings

Component Port Usage

MediaCentral UX Web application 80 MediaCentral Platform Playback Services

(MCPS) HTTP calls

443 MediaCentral HTTPS calls

843 Loading the Flash Player for playback

26000 Inbound MCPS data

5000 Serving outbound JPEG images to the Flash

player

21 Outgoing FTP data

nCommunication over port 21 is only

required for XML transfer to generic CMS

or OVP endpoints or for media transfers to

the WorldNow CMS system and is not

required as part of any installation that

uses standard Media Distribute third-party

connectors.

MediaCentral UX mobile applications 80 MCPS HTTP calls

443 MediaCentral HTTPS calls

Network Firewall Port Settings

Component Port Usage

MediaCentral UX (these ports are

used for outbound communication

with configured endpoints such as

Facebook, Twitter, or YouTube)

80 MediaCentral Platform Playback Services

(MCPS) HTTP calls

443 MediaCentral HTTPS calls

Configuring the Transcode Route

Note that the Interplay Web service and MediaCentral UX application services operate on the

same server, so there are no proxies or firewalls between these components. Access to the

MediaCentral database is also direct, with no database firewall protection required.

Only MediaCentral UX Administrators can access and modify the system data stored within the

user management database (user credentials, user settings, and system attributes).

For more information on MediaCentral security, see the Avid MediaCentral | UX Security

Architecture and Analysis.

Configuring the Transcode Route

Media Distribute delivers video to the configured online video platforms using the following

workflow. An understanding of this workflow might help to complete the Send to Playback

settings.

• The user publishes a bundle to endpoints that include video assets — for example, YouTube

and Vimeo. The source videos are stored in Interplay Production.

• To start the publishing process, Media Distribute sends the source video to the MediaCentral

Distribution server in a send-to-playback operation.

• The Interplay Production media files are mixed down to MXF-wrapped OP1a media. In the

Packages pane, Media Distribute monitors the process as the status displays as “mixing

down.”

nYou can send only sequences for mixdown and transfer to an FTP location.

• The Transfer Manager moves the MXF file to the FTP location specified in the Mixing

Down FTP Path in the Send to Playback system settings — see “Send to Playback

Configuration for Media | Distribute” on page 45.

nThis location is independent of the transcoder. The system supports multiple transcode

configurations which you can assign to various endpoints. By not delivering the video directly to

a transcode watch folder, the transcode route is built in a manner that allows for support of

multiple transcode endpoints.

• The Media Distribute orchestration engine monitors the FTP location. Once the MXF media

arrives at the FTP location, Media Distribute delivers it to the appropriate transcoder /in

folder, based on the configuration for your transcoder service

(ftp://<transcoder>/transcoding/in).

Configuring the Transcode Route

• Media Distribute submits the transcoding job to the transcoder:

- The File Share in Path value (\\<transcoder_hostname>\avid\transcoding/in) should be

configured and mapped to the FTP “in” path (ftp://<transcoder>/transcoding/in). The

file share folder must have the appropriate read/write permissions set. For more

information, see “Configuring the Video Transcoding Host” on page 40.

-The transcoder workflow should be configured to provide output to the

ftp://<transcoder>/transcoding/out folder.

• After transcoding, the Media Distribute orchestration engine obtains the transcoded video

file from the transcoder “out” folder and delivers it to the designed online video provider

(OVP) endpoint for publication.

In order to enable this workflow, you must configure the Send to Playback system settings to

provide the necessary information.

The following illustration outlines the overall workflow for publishing video using

Media Distribute. Note that some details depend on the specific configuration of your transcoder

service — for example, Telestream Vantage or Harmonic ProMedia Carbon transcoder.

ftp://[transcoder]/transcoding/out ftp://[transcoder]/transcoding/in

File Share in Path (mixing down) folder

Third-Party Transcoder Service

Online Video

Provider

(For example:

Vimeo, YouTube (mapped folders)

1 A user creates a media package with video and clicks Post to send it for review and approval. When

a producer approves the package, it is sent for publication.

2 The sequence, with the source files stored in the Interplay Production database, is mixed down to

MXF-wrapped OP1a media. In the Packages pane, the status displays as “mixing down.”

Configuring the Transcode Route

To transcode and publish video with Media Distribute, you need to provide the following

configuration:

• Configuration requires that the following servers are available: Avid MediaCentral

Distribution Service, Interplay Production Services, Interplay Transfer, and MediaCentral

Platform Services.

• You must configure the Send to Playback settings to provide mixdown output to an FTP

server. For more information, see “Configuring for Send to Playback” in the Avid

MediaCentral | UX Administration Guide.

• You must configure each transcoding host — for example, Vantage and Carbon Coder. See

“Configuring the Video Transcoding Host” on page 40.

•You also need to configure an STP profile in the System Settings > Media Distribute section.

See “Send to Playback Configuration for Media | Distribute” on page 45.

•You must configure the Media Distribute system accounts as described in “Configuring

System Accounts for Media | Distribute” on page 64.

nIf your iNEWS stories use uppercase characters, you can select the option to transform iNEWS

stories to lowercase. This changes all text to lowercase characters when you load an iNEWS

story in the Media Distribute layout.

Configuring MediaCentral | UX for Media | Distribute

To use MediaCentral UX to publish your packages, you must configure several parameters so

MediaCentral UX uses the correct server, workgroup, and credentials for your project.

nYou can create only one Media Distribute configuration for each Media Distribute installation.

3 Media Distribute uses the MediaCentral Distribution Service to monitor the send-to-playback

status. When the sequence is mixed down, the Transfer Manager profile, configured in Interplay

Transfer, allows Interplay Transfer to move the MXF file to the Mixing Down FTP Host location.

4 Interplay Transfer moves the media to the Mixing Down FTP Path folder. This folder, specified in

the STP profile, matches the configuration the Transfer Manager profile. The folder is configured as

a shared folder.

5 Media Distribute monitors the shared folder, and when the media has been transferred, Media

Distribute copies the MXF file from the Mixing Down FTP folder to the transcoding/in FTP folder

on the transcoder service system. The shared folder is mapped to the transcoding/in FTP folder on

the transcoder server. It is transcoded and moved to the transcoding/out folder.

6 Media Distribute downloads the transcoded media from the transcoder service.

7 Media Distribute publishes the video package to the specified online video provider.

Configuring the Transcode Route

To configure MediaCentral UX:

1. Sign in to MediaCentral UX as an administrator.

2. Select System Settings from the Layout selector.

The System Settings layout opens.

3. In the Settings pane select Media Distribute > Profiles.

The Settings pane displays the settings in that group.

4. Click the Publication Type menu and select Interplay.

5. Click the + (plus) button in the Details section.

An Interplay profile named “New Profile” is created in the Details section.

6. Specify the required settings:

- Profile Name (type a descriptive name for your profile)

- Interplay Web Services Hostname

- Interplay Host

- Interplay Workgroup Name

Configuring the Transcode Route

-Username

- Password

7. Click Verify Profile Settings to validate the profile settings.

If your profile is valid, a message displays: “Profile configurations is valid.” If any settings

are incorrect, a message displays and indicates which fields are incorrect. All invalid settings

names change to red.

8. Click Apply to save the profile.

The profile displays in the Details section with the new information.

If you are editing a profile, click Revert to return to the original settings. If you want to

delete a profile, select the profile and click the minus (-) button in the Details section.

Configuring the Video Transcoding Host

You must configure Windows network share folder structure and folders before using a

third-party transcoder such as Telestream Vantage® to transcode video for your media package.

You also need a File Transfer Protocol (FTP) service running on your transcode server. For the

FTP process to work, each media file function must be mapped to specified folders. The

following table describes the required structure of the Windows network share folder and FTP

folders on a Vantage host server:

The Windows network folder for incoming media must be accessible and mapped to the FTP

folder (for the transcoded media). This FTP structure is required for retrieving MXF files from

Send to Playback and for providing the transcoded output for Media Distribute workflows.

You also need to set the Interplay Transfer Manager options in the Send to Playback

configuration for Media Distribute. For information on configuring Send to Playback, see “Send

to Playback Configuration for Media | Distribute” on page 45.

To configure your FTP service, you need to install an FTP server application. The procedure in

this section uses the open source FTP server application called FileZilla Server. You can

download the software from the following Web site: https://filezilla-project.org/.

Windows Network Share FTP Folder

avid ftp://<Vantage_hostname>/transcoding/in

ftp://<Vantage_hostname>/transcoding/out

ftp://<Vantage-hostname>/transcoding/mixdown

Configuring the Transcode Route

To set up Windows network share:

1. On your transcoding server, create the following folder if it does not exist already:

<transcoder_hostname>\<drive:>\avid\transcoding\in

2. Right-click the <transcoder_hostname>\<drive:>\avid folder and select Sharing and

Security.

The avid Properties dialog box opens.

3. Click the Sharing tab, and then select the Share this folder option.

Configuring the Transcode Route

4. Click Permissions.

The Permissions dialog box opens.

5. Select Everyone, and then select Allow for all permissions in the Permissions for Everyone

list.

6. Click OK to return to the avid Properties dialog box, and then click OK.

7. Open FileZilla Server, and log in to your server.

Configuring the Transcode Route

8. Select Edit > Users.

The Users dialog box opens.

9. Click Add.

The Add User Account dialog box opens.

10. In the text box, type

avid

, and then click OK.

11. In the Users dialog box, select the following options:

- Enable account

- Password, and type a password for the user account

- Bypass userlimit of server

Configuring the Transcode Route

12. In the Page list, select Shared folders.

13. In the Shared folders area, click Add, and then navigate to the <drive:>\avid folder, and then

click OK.

The folder is added to the Shared folders list.

14. Select the following options for Files and Directories:

-Read

- Write

- Delete

-Append

-Create

- Delete

-List

-+Subdirs

15. Click OK.

Configuring the Transcode Route

Send to Playback Configuration for Media | Distribute

The MediaCentral UX administrator needs to specify Send to Playback configuration

information before you can use publish using Media Distribute. The Transfer Manager

Destination Profile must be the same as the profile name specified in the Interplay Transfer

settings. The FTP host name, user name, and password also reflect the same settings in Interplay

Transfer.

The send-to-playback operation uses the credentials of the MediaCentral UX workgroup user

specified in the Interplay profile and not the currently logged in user, so the user must have

read/write privileges for the Interplay database used for sending media assets to the FTP host

(see “Configuring MediaCentral | UX for Media | Distribute” on page 38). For information on

setting up MediaCentral UX users and roles, see “Managing Users and Groups” in the Avid

MediaCentral | UX Administration Guide.

nYou can create only one Send to Playback configuration for each Media Distribute installation.

To configure Send to Playback publish settings:

1. Sign in to MediaCentral UX as an administrator.

2. Select System Settings from the Layout selector.

The System Settings layout opens.

Configuring the Transcode Route

3. In the Settings pane select Media Distribute > Profiles.

The Settings pane displays the settings in that group.

4. Click the Publication Type menu and select STP.

5. Click the + (plus) button in the Details section.

An STP profile named “New Profile” is created in the Details section.

6. Specify the required settings:

- Profile Name: use the same name used for the FTP server profile configured in the

Interplay Transfer Configuration tool. For more information, see “Configuring an FTP

Server Profile” in the Interplay | Transfer Setup and User’s Guide.

- Target VCID: Select a VCID from the list of supported resolutions.

Configuring the Transcode Route

- Audio: Options are Direct, Stereo, or Mono. When you use Direct to send a export a clip

for Send to Playback, the channel order reflects the channel order used when you

captured the audio. For example, if your source audio is 5:1 multichannel audio, you

should select Direct to preserve the channel mappings.

- Audio Bit Depth: Options are 16 and 24.

- Audio Target Sample Rate: Options are 32000, 44100, 48000, and 96000.

- Shared ISIS Workspace — The STP service requires this ISIS workspace to store video

prior to delivery to the transcode service. Select a valid shared ISIS workspace from the

menu to be used as a temporary location for storing media.

nThe user specified in this profile must have read/write privileges for the shared ISIS workspace.

- Transfer Manager Host — select a Transfer Manager host from the menu. You can use

the values from your Transfer Manager configuration. For more information, see the

Interplay | Transfer Setup and User's Guide.

- Transfer Manager Destination Profile — Select an existing destination profile from the

menu.

- TransferManager Profile Type — Select a profile from the following options:

- Mixing Down FTP Host — Type the FTP host name. The FTP host name must be the

same as the FTP server name associated with the destination profile and specified in the

FTP configuration in Interplay Transfer. For more information on FTP configuration in

Interplay Transfer, see Interplay | Transfer Setup and User's Guide.

Profile Type Description

IFrame For send-to-playback operations using I-frame media. The source media clips

must match the target VCID format. The output file uses an OP1a format.

IFrameAMS For send-to-playback operations using I-frame media and sent to an Avid

AirSpeed server. The source media clips must match the target VCID format.

The output file uses an OP Atom format.

LongGoP For send-to-playback operations using Long GOP media. Since the

send-top-playback encoding creates a new media clip, the source media clips

do not need to match the target VCID format. The output file uses an OP1a

format.

LongGoPAMS For send-to-playback operations using Long GOP media and sent to an Avid

AirSpeed server. Since the send-top-playback encoding creates a new media

clip, the source media clips do not need to match the target VCID format. The

output file uses an OP Atom format.

Configuring the Transcode Route

In the sample profile setting above, the Transfer Manager Destination Profile is listed as

xdcamhd1080i50

and the Mixing Down FTP Host is

xxx-srmonia

. This corresponds

to the following components of the Interplay Transfer FTP configuration:

- Mixing Down FTP Path — Type the path to the FTP destination where MXF output is

staged for transcode. This should be the same as the destination directory specified in

the FTP configuration in Interplay Transfer. In the example here, the Mixing Down FTP

Path is

/transcoding/mixdown

cDo not set the Mixing Down FTP Path to the same delivery folders used by your

third-party transcoding application — for example, the FTP Transcode/in Path in your

Vantage profile. The FTP location must be independent of the transcoder path.

- Mixing Down FTP Username — Type the user name for your FTP service credentials.

-Mixing Down FTP Password — Type the password for your FTP service credentials.

nYou cannot use either an at sign (@) or a colon (:) in your password. You can substitute %40

(@) or %3a (:) instead.

7. Click Verify Profile Settings to validate the profile settings.

If your profile is valid, a message displays: “Profile configurations is valid.” If any settings

are incorrect, a message displays and indicates which fields are incorrect. All invalid settings

names change to red.

8. Click Apply to save the profile.

The profile displays in the Details section with the new information.

If you are editing a profile, click Revert to return to the original settings. If you want to

delete a profile, select the profile and click the minus (-) button in the Details section.

Configuring the Transcode Route

Configuring a Telestream Vantage Profile

Before you can use the Telestream Vantage video transcoding service with Media Distribute, you

must install Telestream Vantage on your system and then configure the Vantage settings in

MediaCentral UX.

Before you set up your Vantage workflow, you must configure your video host transcoding. For

more information, see “Configuring the Video Transcoding Host” on page 40.

The following procedures assume you have created a Vantage account. For more information,

see http://www.telestream.net/vantage/.

nYou must select your Telestream Vantage video transcoding service profile when you set up your

system accounts — for example, your YouTube or Vimeo account — for publishing your media

packages. Depending on your configuration, you might need to configure your system accounts

before configuring MediaCentral UX for your Vantage account. For more information, see

“Configuring System Accounts for Media | Distribute” on page 64.

To install and configure Telestream Vantage:

1. Install Vantage on your Windows system.

2. Use the Vantage Management Console to configure your Vantage license.

3. Configure your Vantage workflow, and then edit your Flip tasks to set the output folder to

the \\<hostname>\avid\transcoding\out folder you created when you set up your video host

transcoding. A typical Vantage workflow usually includes at least a Receive and a Flip task.

See your Vantage documentation for more information on creating and configuring

workflows.

4. Make sure that you select H.264 as the Encoder and .mp4 as the Extension in your Flip

tasks.

nYou cannot change the output file name by adding file name prefixes or suffixes. This causes the

publish job to fail.

5. Type the following URL in a browser address bar to obtain your Vantage workflow ID:

http://<hostname>:8676/DomainRest/GetWorkflows.

A Web page displays your Vantage workflow ID.

6. Save your workflow ID.

Configuring the Transcode Route

To configure MediaCentral UX for your Vantage account:

1. Sign in to MediaCentral UX as an administrator.

2. Select System Settings from the Layout selector.

The System Settings layout opens.

3. In the Settings pane select Media Distribute > Profiles.

The Settings pane displays the settings in that group.

4. Click the Publication Type menu and select Vantage.

5. Click the + (plus) button in the Details section.

A Vantage profile named “New Profile” is created in the Details section.

Configuring the Transcode Route

6. Specify the required settings, using the configuration on your Vantage system:

- Profile Name (type a descriptive name for your profile)

- Workflow ID (from your Vantage workflow configuration)

- Host Name (your Vantage hostname — for example, vantage-host)

- FTP Hostname (optional — if you use different servers for your FTP transcode in/out

location and for your File Share path, you can specify a different FTP server. If the

transcode in/out and File Share are on the same server, you can leave this setting blank.)

- FTP User Name (from your video host transcoding configuration)

- FTP Password (from your video host transcoding configuration)

- FTP Transcode/In Path (for incoming files, from your video host transcoding

configuration. You can use a subpath expression — for example,

transcoding\in.

)

- FTP Transcode/Out Path (for outgoing files, from your video host transcoding

configuration. You can use a subpath expression — for example,

transcoding\out

- File Share In Path (from your video host transcoding configuration — see “Configuring

the Video Transcoding Host” on page 40. You must use the path to the Network Share

path for this setting — for example,

\\my_vantage\avid

7. Click Verify Profile Settings to validate the profile settings.

If your profile is valid, a message displays: “Profile configurations is valid.” If any settings

are incorrect, a message displays and indicates which fields are incorrect. All invalid settings

names change to red.

8. (Optional) If your iNEWS stories use uppercase characters, you can select the option to

transform iNEWS stories to lowercase. This changes all text to lowercase characters when

you load an iNEWS story in the Media Distribute layout.

9. Click Apply to save the profile.

The profile displays in the Details section with the new information.

If you are editing a profile, click Revert to return to the original settings. If you want to

delete a profile, select the profile and click the minus (-) button in the Details section.

Configuring the Transcode Route

Validating the Vantage Transcode Route Configuration

When you have configured video transcoding for your Vantage video host system as well as the

Telestream Vantage profile, you can validate the configuration by publishing a test media

package to make sure all components work successfully. For information on configuring video

transcoding and the Vantage profile, see “Configuring the Video Transcoding Host” on page 40

and “Configuring a Telestream Vantage Profile” on page 49.

nTo publish a media package, you first need to set up and configure at least one system account.

For more information, see “Configuring System Accounts for Media | Distribute” on page 64.

The validation procedure includes monitoring the progress of the transcode procedure in the

following applications:

• the ServiceMix log in your MediaCentral server

• the Job Status tab of the Vantage Workflow Designer

• the Vantage server Avid transcode folders

• the Media Distribute layout in MediaCentral UX

To validate the Vantage transcode configuration:

1. Log in to the MediaCentral server, either locally or using a terminal emulator application

such as PuTTY, and type the following in a terminal window:

a. To open the ServiceMix application, type the following command:

ssh Administrator@localhost -p 8101

b. Type

yes

to continue connecting to the host, and then type the default password

avid

The ServiceMix interface displays in the terminal window.

c. To move to the end of the log, type

log:tail

, and press Enter.

Configuring the Transcode Route

2. On your Vantage server, do the following:

a. Open Vantage Workflow Designer, and then select File > Job Status.

b. In a file browser, navigate to <drive>:/avid/transcoding so you can see the following

folders:

-<drive>:/avid/transcoding/in

-<drive>:/avid/transcoding/out

3. Sign in to MediaCentral UX, and then click the Layout selector and select Media Distribute.

The Media Distribute layout opens.

4. Click the Social Message pane.

The Social Message pane opens.

5. Add some text in the Message text box.

Changes you make in the Message text box apply globally to all social media targets you

select. You can also modify the story text for individual targets in the text boxes for those

targets.

6. Select a social media target — for example, YouTube.

7. Click the Profiles menu, and select the Vantage transcoding service profile.

8. Double-click a video asset in the Asset pane or drag the video asset to the Media viewer.

The video asset displays in the Media pane. You can select a master clip, a subclip, or a

sequence.

Configuring the Transcode Route

9. Click Attach Video.

The video displays in the Video area of the Social Media pane.

10. Click Post, and then click Yes.

Configuring the Transcode Route

11. Click the Packages pane, and then click the Refresh button.

The Packages pane displays the media package status as Pending.

12. Click Publish.

The Packages pane displays the media package status as Mixing Down. When the mixdown

process completes, the status displays as Mixing Down Finished.

13. In the ServiceMix console displaying in the MediaCentral server terminal window, check the

log for the following entries:

- Transcoded MediaItem is found transcodedMediaItemID=<ID number>

- Starting to copy MXF <media object ID> to transcoder machine FTP

<Vantage_hostname>

nWhen the media package is published, the ServiceMix log displays the transcoded media item as

released.

Configuring the Transcode Route

14. In the file browser on the Vantage server, check the <drive>:/avid/transcoding/in folder for

the MXF media file to be transcoded.

nWhen the media package is published, the transcoded media item is deleted from the

transcoding/in and transcoding/out folders.

15. In the Job Status tab of the Vantage Workflow Designer, check the status of the transcode

job.

16. When the Job Status tab reports the transcode process as completed, check the

<drive>:/avid/transcoding/out folder in the file browser for the transcoded MXF media file.

Configuring the Transcode Route

17. In the MediaCentral UX Packages pane, check the status of the media package.

When the publish procedure completes, the status displays as Published and the link to video

included in the package appears in blue. Clicking the link opens a browser and displays the

video on the Web page for the selected online platform.

Configuring the Harmonic ProMedia Carbon Transcoder

Before you can use the Harmonic ProMedia™ Carbon transcoder with Media Distribute, you

must install ProMedia Carbon on your system and then configure the CarbonCoder settings in

MediaCentral UX.

Before you set up your Carbon system, you must configure your video host transcoding. For

more information, see “Configuring the Video Transcoding Host” on page 40.

The following procedures assume you have created a ProMedia Carbon account. For more

information, see http://www.harmonicinc.com/product/promedia-carbon.

To install and configure ProMedia Carbon:

1. Install Harmonic ProMedia Carbon on your Windows system.

2. Start ProMedia Carbon.

3. In Carbon, create a new profile by doing the following:

a. In the Target tab, add a new target and select a target preset.

b. In the Target Parameters window, modify the Destination Base Name to

and the

Destination Path to \\hostname\avid\transcoding\out.

c. Click Save Profile, and name the new profile

Avid MPD

Configuring the Transcode Route

4. Locate the profile ID by using one of the following:

tThe Preset Editor in Carbon Admin

tListProfiles.exe in the Carbon SDK

To configure MediaCentral UX for your ProMedia Carbon account:

1. Sign in to MediaCentral UX as an administrator.

2. Select System Settings from the Layout selector.

The System Settings layout opens.

3. In the Settings pane select Media Distribute > Profiles.

The Settings pane displays the settings in that group.

4. Click the Publication Type menu and select CarbonCoder.

5. Click the + (plus) button in the Details section.

A CarbonCoder profile named “New Profile” is created in the Details section.

Configuring the Transcode Route

6. Specify the required settings, using the using the parameter fields from ProMedia Carbon:

- Profile Name (type a descriptive name for your profile)

- Workflow ID (from your CarbonCoder profile)

- Host Name (your CarbonCoder hostname — for example, carboncoder-host)

- FTP Hostname (optional — if you use different servers for your FTP transcode in/out

location and for your File Share path, you can specify a different FTP server. If the

transcode in/out and File Share are on the same server, you can leave this setting blank.)

- FTP User Name (from your video host transcoding configuration)

- FTP Password (from your video host transcoding configuration)

- FTP Transcode/In Path (for incoming files, from your video host transcoding

configuration)

- FTP Transcode/Out Path (for outgoing files, from your video host transcoding

configuration)

- File Share In Path (from your video host transcoding configuration — see “Configuring

the Video Transcoding Host” on page 40)

7. Click Verify Profile Settings to validate the profile settings.

If your profile is valid, a message displays: “Profile configurations is valid.” If any settings

are incorrect, a message displays and indicates which fields are incorrect. All invalid settings

names change to red.

8. (Optional) If your iNEWS stories use uppercase characters, you can select the option to

transform iNEWS stories to lowercase. This changes all text to lowercase characters when

you load an iNEWS story in the Media Distribute layout.

9. Click Apply to save the profile.

The profile displays in the Details section with the new information.

If you are editing a profile, click Revert to return to the original settings. If you want to

delete a profile, select the profile and click the minus (-) button in the Details section.

Configuring a RadiantGrid Profile

In order to use the RadiantGrid™ transcoding engine with Media Distribute, you need to install

and configure the RadiantGrid software on a supported server. See your RadiantGrid

representative for more information.

The following procedures assume you have created a RadiantGrid account and password. For

more information, see http://www.wohler.com/RgProduct.aspx.

Configuring the Transcode Route

Once you have your RadiantGrid profile credentials, you need to create new transcode profile.

This profile must transcode media from the MXF format to the H.264 (.mp4) format. The

following procedure does not describe all of the options required for creating the profile using

the RadiantGrid application.

To set up a RadiantGrid profile for use with Media Distribute:

1. Open your browser and log in to your RadiantGrid account.

2. Create a new Transcode profile. For details on creating a RadiantGrid transcoding profile,

see your RadiantGrid documentation.

Configuring the Transcode Route

3. (Optional) Configure a workflow template.

nIf you create a new transcode profile, you might be able to skip this step. However, if you use an

existing transcode profile, you might need to reconfigure your workflow template.

4. Configure an FTP service. For information on configuring the FTP service, see “Configuring

the Video Transcoding Host” on page 40.

To configure MediaCentral UX for your RadiantGrid account:

1. Sign in to MediaCentral UX as an administrator.

2. Select System Settings from the Layout selector.

The System Settings layout opens.

Configuring the Transcode Route

3. In the Settings pane select Media Distribute > Profiles.

The Settings pane displays the settings in that group.

4. Click the Publication Type menu and select RadiantGrid.

5. Click the + (plus) button in the Details section.

A RadiantGrid profile named “New Profile” is created in the Details section.

6. Specify the required settings, using the configuration on your RadiantGrid system and your

FTP configuration:

- Profile Name (type a descriptive name for your profile)

- RadiantGrid User Name (from your RadiantGrid configuration)

- RadiantGrid Password (from your RadiantGrid configuration)

- Transcoding Profile Name (the profile name is listed on the Workflow > Transcode Web

page of your RadiantGrid configuration)

Configuring the Transcode Route

- Host Name (your RadiantGrid server hostname — for example, radiant-host)

- FTP Hostname (optional — if you use different servers for your FTP transcode in/out

location and for your File Share path, you can specify a different FTP server. If the

transcode in/out and File Share are on the same server, you can leave this setting blank.)

- FTP User Name (from your video host transcoding configuration)

- FTP Password (from your video host transcoding configuration)

- FTP Transcode/In Path (for incoming files, from your video host transcoding

configuration)

- FTP Transcode/Out Path (for outgoing files, from your video host transcoding

configuration)

- File Share In Path (from your video host transcoding configuration)

- File Share Out Path (from your video host transcoding configuration)

7. Click Verify Profile Settings to validate the profile settings.

If your profile is valid, a message displays: “Profile configurations is valid.” If any settings

are incorrect, a message displays and indicates which fields are incorrect. All invalid settings

names change to red.

8. (Optional) If your iNEWS stories use uppercase characters, you can select the option to

transform iNEWS stories to lowercase. This changes all text to lowercase characters when

you load an iNEWS story in the Media Distribute layout.

9. Click Apply to save the profile.

The profile displays in the Details section with the new information.

If you are editing a profile, click Revert to return to the original settings. If you want to

delete a profile, select the profile and click the minus (-) button in the Details section.

3Configuring System Accounts for

Media | Distribute

You can set up multiple accounts in the System Settings layout for the services you want to use

for publishing to multiple platforms. For information on the supported system accounts, see the

following topics:

•“Configuring the Bitly Link-Shortening Service” on page 65

•“Configuring a Twitter Publication Account” on page 66

•“Configuring a Facebook Publication Account” on page 72

•“Configuring a Facebook Page Publication Account” on page 78

•“Configuring a Vimeo Publication Account” on page 85

•“Configuring a YouTube Publication Account” on page 88

•“Configuring a YouTube v3 Publication Account” on page 93

•“Configuring a Brightcove Account” on page 97

•“Configuring a Kaltura Account” on page 100

•“Configuring an Ooyala Account” on page 102

•“Configuring an Atex Polopoly Web CMS Account” on page 105

•“Configuring a WorldNow Web CMS Profile” on page 107

•“Configuring thePlatform Profile” on page 113

•“Configuring a WordPress CMS Profile” on page 115

•“Configuring an InternetBroadcasting CMS Profile” on page 117

•“Configuring a Generic CMS Profile” on page 119

•“Configuring a Generic OVP Profile” on page 124

nIf your iNEWS stories use uppercase characters, you can select the option in the

Media Distribute > General section of the System Settings to transform iNEWS stories to

lowercase. This changes all text to lowercase characters when you load an iNEWS story in the

Media Distribute layout.

Configuring the Bitly Link-Shortening Service

You can configure the Bitly™ URL shortening service using MediaCentral UX settings. Using a

link shortening service is optional, but it can aid in ensuring that URLs do not exceed character

limits on some social media postings.

The following procedures assume you have created a Bitly account at https://bitly.com/ and you

have generated a Bitly API key at http://dev.bitly.com/.

To configure Bitly for Media Distribute:

1. Sign in to MediaCentral UX as an administrator.

2. Select System Settings from the Layout selector.

The System Settings layout opens.

3. In the Settings pane select Media Distribute > Profiles.

The Settings pane displays the settings in that group.

4. Click the Publication Type menu and select Bitly.

5. Click the + (plus) button in the Details section.

A Bitly profile named “New Profile” is created in the Details section.

Configuring a Twitter Publication Account

6. Specify the required settings:

- Profile Name (type a descriptive name for your profile)

-Login

-API Key

7. Click Verify Profile Settings to validate the profile settings.

If your profile is valid, a message displays: “Profile configurations is valid.” If any settings

are incorrect, a message displays and indicates which fields are incorrect. All invalid settings

names change to red.

nThe setting, “Transform iNEWS stories to lower case,” applies only to Media Distribute

accounts that publish packages containing iNEWS stories. The option does not affect this setting.

8. Click Apply to save the profile.

The profile displays in the Details section with the new information.

If you are editing a profile, click Revert to return to the original settings. If you want to

delete a profile, select the profile and click the minus (-) button in the Details section.

Configuring a Twitter Publication Account

Before you can publish a package to Twitter from MediaCentral UX using Media Distribute, you

must first set up a Twitter account to which you want to publish, and you must configure a

Twitter publication account.

This section describes configuring corporate or group house accounts. When you publish to

these accounts, your packages require review and approval For information on configuring a

personal account, see “Configuring a User Profile for a Personal Twitter Account” on page 128.

The following procedures assume you have created a Twitter account at https://twitter.com.

nThe user interface for Twitter might change without notice. The procedure below outlines the

general steps to create the elements needed to configure Media Distribute. For more information

on creating a Twitter application, see your Twitter account documentation.

Configuring a Twitter Publication Account

To set up a Twitter application account for MediaCentral UX multi-platform delivery:

1. Log on to your Twitter account and navigate to the My Applications Web page at

https://dev.twitter.com/apps.

2. Click Create New App.

The Create an application Web page opens.

3. Type your information for the required fields, which might include the following:

-Name

- Description

- Website (the public URL for your Twitter application, where users can download your

application or get more information about it; use a placeholder URL if you do not have

an application URL yet)

4. In the Developer Agreement section, read the rules agreement and select Yes, I agree.

5. If required, type the security text.

6. Click Create your Twitter application.

Your Twitter application opens in the Application Management page.

Configuring a Twitter Publication Account

7. Click the Permissions tab.

The Permissions tab opens.

8. In the Access area, select Read, Write and Access direct messages, and then click Update

this Twitter application’s settings.

Your settings are saved.

Configuring a Twitter Publication Account

9. Click the Keys and Access Tokens tab.

The Keys and Access Tokens tab opens.

Configuring a Twitter Publication Account

10. In the Application Settings area, click Create Consumer Key and Secret.

nIf you already created an access token, the button in this area is labeled “Recreate Consumer

Key and Secret.”

11. In the Your Access Token area, click Create My Access Token and Token Secret.

nIf you already created an access token, the button in this area is labeled “Recreate My Access

Token and Token Secret.”

12. Save the following parameter fields so you can enter them in the appropriate location in the

MediaCentral UX settings:

-Consumer key

- Consumer secret

- Access token

- Access token secret

To configure MediaCentral UX for your Twitter application:

1. Sign in to MediaCentral UX as an administrator.

2. Select System Settings from the Layout selector.

The System Settings layout opens.

Configuring a Twitter Publication Account

3. In the Settings pane select Media Distribute > Profiles.

The Settings pane displays the settings in that group.

4. Click the Publication Type menu and select Twitter.

5. Click the + (plus) button in the Details section.

A Twitter profile named “New Profile” is created in the Details section.

6. Specify the required settings, using the parameter fields you copied from your Twitter

application Web page:

- Profile Name (type a descriptive name for your profile)

- Access Token

- Access Secret

-Consumer Key

- Consumer Secret

Configuring a Facebook Publication Account

7. Click Verify Profile Settings to validate the profile settings.

If your profile is valid, a message displays: “Profile configurations is valid.” If any settings

are incorrect, a message displays and indicates which fields are incorrect. All invalid settings

names change to red.

8. Click Apply to save the profile.

The profile displays in the Details section with the new information.

If you are editing a profile, click Revert to return to the original settings. If you want to

delete a profile, select the profile and click the minus (-) button in the Details section.

nYou can add multiple Twitter profiles.

Configuring a Facebook Publication Account

Before you can publish a package to Facebook from MediaCentral UX using Media Distribute,

you must first set up a Facebook profile account to which you want to publish, and you must

configure a Facebook publication account in MediaCentral UX. You also need to set permissions

for your Facebook application so it can post to your Facebook account.

This section describes configuring corporate or group house accounts. When you publish to

these accounts, your packages require review and approval For information on configuring a

personal account, see “Configuring a User Profile for a Personal Facebook Account” on

page 130.

nBefore you attempt to publish your package to Facebook, Avid recommends that you test your

account privileges.

The following procedures assume you have created a Facebook account at

https://www.facebook.com.

nThe user interface for Facebook developers might change without notice. The procedure below

provides general guidelines to create the elements needed to configure Media Distribute. For

more information on creating a Facebook application, downloading and installing any necessary

SDK applications, see Facebook support documentation.

Configuring a Facebook Publication Account

To set up a Facebook application account for MediaCentral UX multi-platform delivery:

1. Log on to your Facebook account, and then go to the Facebook developers Web page at

https://developers.facebook.com.

2. If you have not registered as a Facebook developer, do the following:

a. Click Apps and select Register as a Developer.

The Register as a Facebook Developer dialog box opens.

b. Follow the prompts to register as a Facebook developer.

3. Click Apps, and select Create New App.

nIf you previously created an app for Facebook, select My Apps > Add a New App.

The Create New App dialog box opens.

4. Select a platform for your app — for example, Android.

5. Type a name for your application in the App Name text box, and then click Create New

Facebook App ID.

The Create New App ID dialog box opens.

6. Select the appropriate options and then click Create App ID.

7. Click Skip Quick Start.

The Facebook app Dashboard opens.

8. Click Settings.

Configuring a Facebook Publication Account

9. Click Add Platform, and then select Website.

The Settings dialog box opens.

10. In the Website area, type a site URL.

nIf you do not have a site URL, you can type

http://localhost

. You can modify the URL later.

11. Click Save Changes.

12. Save the following parameter fields so you can enter them in the appropriate location in the

MediaCentral UX settings:

-App ID

- App Secret

Configuring a Facebook Publication Account

To set Facebook permissions for your Media Distribute application:

1. Log on to your Facebook developers account, and click Tools > Graph API Explorer.

The Graph API Explorer Web page displays.

2. Click the Application menu and select your Facebook application.

3. Click the Get Token menu, and then select Get Access Token.

The Select Permissions dialog box opens.

4. Click the User Data Permissions tab, and then select the user_friends, user_photos, and

user_videos options.

Configuring a Facebook Publication Account

5. Click the Extended Permissions tab, and then select the publish_actions and the

manage_pages options.

6. Click Get Access Token.

The Web page generates a new access token and sets the necessary permissions for your

application.

nThis token remains valid for only one hour.

7. Save your access token so you can enter it in the appropriate location in the

MediaCentral UX setting.

To configure MediaCentral UX for your Facebook application:

1. Sign in to MediaCentral UX as an administrator.

2. Select System Settings from the Layout selector.

The System Settings layout opens.

Configuring a Facebook Publication Account

3. In the Settings pane select Media Distribute > Profiles.

The Settings pane displays the settings in that group.

4. Click the Publication Type menu and select Facebook.

5. Click the + (plus) button in the Details section.

A Facebook profile named “New Profile” is created in the Details section.

6. Specify the required settings, using the parameter fields you copied from your Facebook

Apps Web page:

- Profile Name (type a descriptive name for your profile — for example, [MyCompany]

Facebook News))

- FB Profile ID

- Application ID

Configuring a Facebook Page Publication Account

- Application Secret

- Access Token

- (Optional) Album ID

nYou can specify the name of a Facebook album if you want to publish images directly to an album

that you have created for your Facebook account.

7. (Optional) Click Transcoding Profile and select one of the available profiles.

nYou cannot publish video directly to Facebook unless you specify a transcoding profile.

8. (Optional) Click Get Expiration Date.

Media Distribute checks the expiration date of your access token and updates the entry in the

Expiration Date field. This shows you how much time is left on your Facebook access token.

9. (Optional) Click Get Long-Term Token.

Media Distribute converts your access token, which often remains valid for a couple of

hours, to a long-lived token. For more information on short-lived and long-lived tokens and

their expiration periods, see your Facebook developer documentation.

10. Click Verify Profile Settings to validate the profile settings.

If your profile is valid, a message displays: “Profile configurations is valid.” If any settings

are incorrect, a message displays and indicates which fields are incorrect. All invalid settings

names change to red.

11. Click Apply to save the profile.

The profile displays in the Details section with the new information.

If you are editing a profile, click Revert to return to the original settings. If you want to

delete a profile, select the profile and click the minus (-) button in the Details section.

nYou can add multiple Facebook profiles.

Configuring a Facebook Page Publication Account

You can publish packages to a corporate Facebook Page account from MediaCentral UX using

Media Distribute. Once you set up a Page account on Facebook, you then can configure a

Facebook Page publication account.

Facebook Pages allow businesses to connect with customers and users. Facebook Page accounts

allow official representatives of a business or organization to create and contribute to Pages. For

more information on Facebook Pages, see Facebook Pages support information at

www.facebook.com/help.

Configuring a Facebook Page Publication Account

You do not need to configure a Facebook publication account in Media Distribute in order to

publish to your Facebook Page, but you do need to have a Facebook account to set up a Facebook

Page. For information on configuring a Facebook publication account, see “Configuring a

Facebook Publication Account” on page 72.

nBefore you attempt to publish your package to a Facebook Page, Avid recommends that you test

your account privileges.

The following procedures assume you have created a Facebook account and created a Facebook

Page at https://www.facebook.com/pages/create.

nThe user interface for Facebook developers might change without notice. The procedure below

provides general guidelines to create the elements needed to configure Media Distribute. For

more information on creating a Facebook application, see Facebook support documentation.

To set up a Facebook Page for MediaCentral UX multi-platform delivery:

1. Log on to your Facebook account, click the Edit Account button, and select Manage Pages.

The Pages page opens.

2. Click your Page in the Pages list.

Your Facebook Page opens.

Configuring a Facebook Page Publication Account

3. Click About, and then select Page Info.

Your Facebook Page displays the page information.

4. Save your Facebook Page ID so you can enter it in the appropriate location in the

MediaCentral UX setting.

Configuring a Facebook Page Publication Account

To set Facebook Page permissions for your Media Distribute application:

1. Log on to your Facebook developers account, and click Tools & Support > Graph API

Explorer.

2. Click the Application menu and select the Facebook application associated with your

Facebook Page.

The Graph API Explorer Web page displays.

3. Click the Get Token menu, and then select Get Access Token.

The Select Permissions dialog box opens.

4. Click the User Data Permissions tab, and then select the user_friends, the user_photos, and

user_videos options.

Configuring a Facebook Page Publication Account

5. Click the Extended Permissions tab, and then select the publish_actions, the manage_pages,

and the read_stream options.

6. Click Get Access Token.

The Web page generates a new access token and sets the necessary permissions for your

application.

nThis token remains valid for only one hour.

7. Save your access token so you can enter it in the appropriate location in the

MediaCentral UX setting.

8. Click Debug.

The Access Token Debugger page opens and displays information about your access token.

9. Save your App ID and User ID so you can enter them in the appropriate locations in the

MediaCentral UX setting.

Configuring a Facebook Page Publication Account

10. Select Apps > [your Facebook app].

The Dashboard for your app opens.

11. Click Show to display your App Secret.

12. Save your App Secret so you can enter it in the appropriate locations in the MediaCentral

UX setting.

To configure MediaCentral UX for your Facebook Page:

1. Sign in to MediaCentral UX as an administrator.

2. Select System Settings from the Layout selector.

The System Settings layout opens.

Configuring a Facebook Page Publication Account

3. In the Settings pane select Media Distribute > Profiles.

The Settings pane displays the settings in that group.

4. Click the Publication Type menu and select FacebookPage.

5. Click the + (plus) button in the Details section.

A FacebookPage profile named “New Profile” is created in the Details section.

6. Specify the required settings, using the parameter fields you copied from your Facebook

Page Web page:

- Profile Name (type a descriptive name for your profile — for example, [MyCompany]

Page)

- FB Profile ID — the Facebook Profile ID of the user who administers your Facebook

Page

- FB Page ID — from your Facebook app settings

Configuring a Vimeo Publication Account

- Application ID — from your Facebook app settings

- Application Secret — from your Facebook app settings

- Access Token — from your Facebook app settings

- (Optional) Album ID

nYou can specify the name of a Facebook album if you want to publish images directly to an album

that you have created for your Facebook account.

7. (Optional) Click Get Expiration Date.

Media Distribute checks the expiration date of your access token and updates the entry in the

Expiration Date field. This shows you how much time is left on your Facebook access token.

8. (Optional) Click Get Long-Term Token.

Media Distribute converts your access token, which often remains valid for a couple of

hours, to a long-lived token. For more information on short-lived and long-lived tokens and

their expiration periods, see your Facebook developer documentation.

9. Click Verify Profile Settings to validate the profile settings.

If your profile is valid, a message displays: “Profile configurations is valid.” If any settings

are incorrect, a message displays and indicates which fields are incorrect. All invalid settings

names change to red.

10. Click Apply to save the profile.

The profile displays in the Details section with the new information.

If you are editing a profile, click Revert to return to the original settings. If you want to

delete a profile, select the profile and click the minus (-) button in the Details section.

nYou can add multiple Facebook page profiles.

Configuring a Vimeo Publication Account

Before you can publish a package to Vimeo from MediaCentral UX using Media Distribute, you

must first set up a Vimeo account to which you want to publish, and you must configure a Vimeo

publication account.

nMedia Distribute works with both the Advanced API and the standard API used by Vimeo

applications. For both, you need to check the OAuth tab in the My Apps Web page for the

required parameters used in configuring your Vimeo account. Media Distribute does not use

OAuth2 authentication.

Configuring a Vimeo Publication Account

The following procedures assume you have created a Vimeo account at https://vimeo.com/.

nThe user interface for Vimeo might change without notice. The procedure below outlines the

general steps to create the elements needed to configure Media Distribute. For more information

on creating a Vimeo application, see your Vimeo account documentation.

To set up a Vimeo application account for MediaCentral UX multi-platform delivery:

1. Log on to your Vimeo account, and then go to the Vimeo My Apps Web page at

https://developer.vimeo.com/apps.

2. Click “Create a new app.”

The Create an new App Web page opens.

3. Type your information in the required text fields:

-App Name

-App Description

- App URL (the public URL for your Vimeo application, where users can download your

application or get more information about it; use a placeholder URL if you do not have

an application URL yet)

4. Accept the Vimeo API License Agreement (https://developer.vimeo.com/guidelines/terms)

and the Vimeo Terms of Service (https://vimeo.com/terms), and then click Create app.

The My API Apps Web page opens.

Configuring a Vimeo Publication Account

5. Click the OAuth tab, and save the following parameter fields so you can enter them in the

appropriate location in the MediaCentral UX settings:

- Client ID (Also known as Consumer Key or API Key)

- Client Secret (Also known as Consumer Secret or API Secret)

- Access token

- Access token secret

nBy default, Vimeo assigns Read, Write, and Delete permissions for your application.

To configure MediaCentral UX for your Vimeo application:

1. Sign in to MediaCentral UX as an administrator.

2. Select System Settings from the Layout selector.

The System Settings layout opens.

3. In the Settings pane select Media Distribute > Profiles.

The Settings pane displays the settings in that group.

4. Click the Publication Type menu and select Vimeo.

Configuring a YouTube Publication Account

5. Click the + (plus) button in the Details section.

A Vimeo profile named “New Profile” is created in the Details section.

6. Specify the required settings, using the parameter fields you copied from your Vimeo My

Advanced API Apps Web page:

- Profile Name (type a descriptive name for your profile)

- Access Token

- Access Secret

-Consumer Key

- Consumer Secret

7. Click Transcoding Profile and select one of the available profiles.

8. Click Verify Profile Settings to validate the profile settings.

If your profile is valid, a message displays: “Profile configurations is valid.” If any settings

are incorrect, a message displays and indicates which fields are incorrect. All invalid settings

names change to red.

9. Click Apply to save the profile.

The profile displays in the Details section with the new information.

If you are editing a profile, click Revert to return to the original settings. If you want to

delete a profile, select the profile and click the minus (-) button in the Details section.

Configuring a YouTube Publication Account

Before you can publish a package to YouTube from MediaCentral UX using Media Distribute,

you must first set up a Google account to manage the publication of your media package to

YouTube, and you must configure a YouTube publication account in MediaCentral UX.

The following procedures assume you have created a Google account at

https://accounts.google.com/.

Google has switched the authorization standard used by YouTube applications to OAuth 2.0. If

you use a YouTube application created before April 2015 to publish videos to the Web, you can

follow the procedures in this section. If you want to use OAuth 2.0 credentials or if you want to

create a new YouTube application, see “Configuring a YouTube v3 Publication Account” on

page 93.

nThe user interface for YouTube and Google accounts might change without notice. The

procedure below outlines the general steps to create the elements needed to configure Media

Distribute. For more information on creating and managing a YouTube application, see your

Google developer account documentation.

Configuring a YouTube Publication Account

You need to provide the following information to configure your YouTube account for

Media Distribute:

• Your Google developer account user name and password.

• Your Google project name.

•The server API key.

To create a YouTube application for MediaCentral UX:

1. Log on to your Google account, and then go to the Google Developers Console Web page at

https://console.developers.google.com/project.

2. Click the name of your existing project.

The Project Dashboard for your project opens.

3. In the navigation panel for your project, click Permissions.

The Permissions page opens.

Configuring a YouTube Publication Account

4. Select the user you want to administer the project and the account for your application and

select the appropriate permissions:

- Is Owner — by default, the user who creates the project is the owner. You can add other

owners who can change the project settings and manage project members.

- Can edit — these users can modify the project settings.

- Can view — these users can read any project settings or information about the project.

nYou can add users clicking the Add Member button.

5. In the APIs & auth section, click Credentials.

The Credentials page opens.

6. Click Add credentials, and then select API key.

The Create a new key dialog box opens.

Configuring a YouTube Publication Account

7. Click Server key in the Create a new key dialog box.

The Create server API key dialog box opens.

8. (Option) In the Accept Requests from These Server IP Addresses text box, type the name of

the server used for your Media Distribute applications. This allows you to restrict your API

key so that requests are only allowed from your servers’ source IP addresses

9. Click Create.

A new API key is created and displays in the Credentials page.

Configuring a YouTube Publication Account

10. If you have never used this account to upload a video, do the following to create a YouTube

channel:

a. In your browser, navigate to https://www.youtube.com/my_videos.

b. Create a new channel. For information creating a new YouTube channel, see the

YouTube online help.

To configure MediaCentral UX for your YouTube application:

1. Sign in to MediaCentral UX as an administrator.

2. Select System Settings from the Layout selector.

The System Settings layout opens.

3. In the Settings pane select Media Distribute > Profiles.

The Settings pane displays the settings in that group.

4. Click the Publication Type menu and select YouTube.

5. Click the + (plus) button in the Details section.

A YouTube profile named “New Profile” is created in the Details section.

Configuring a YouTube v3 Publication Account

6. Specify the required settings, using the parameter fields you copied from your YouTube

Product Dashboard Web page as well as your YouTube credentials:

- Profile Name (type a descriptive name for your profile)

- Application Name (from your Google Developer Console project)

- Developer Key (the API key from your Google Developer Console project)

-User Name

- Password

7. Click Transcoding Profile and select one of the available profiles.

8. Click Verify Profile Settings to validate the profile settings.

If your profile is valid, a message displays: “Profile configurations is valid.” If any settings

are incorrect, a message displays and indicates which fields are incorrect. All invalid settings

names change to red.

nDue to security settings on Google accounts, you might receive an error indicating an incorrect

user name or password, even if your account credentials are correct. You can sign in to your

Google account and change the Sign-in and Security settings to enable access to the account for

less secure apps. For more information, see the Google Accounts Help.

9. Click Apply to save the profile.

The profile displays in the Details section with the new information.

If you are editing a profile, click Revert to return to the original settings. If you want to

delete a profile, select the profile and click the minus (-) button in the Details section.

Configuring a YouTube v3 Publication Account

Before you can publish a package to YouTube from MediaCentral UX using Media Distribute,

you must first set up a Google account to manage the publication of your media package to

YouTube, and you must configure a YouTube v3 publication account in MediaCentral UX.

The following procedures assume you have created a Google account at

https://accounts.google.com/.

nThe user interface for Google accounts might change without notice. The procedure below

outlines the general steps to create the elements needed to configure Media Distribute. For more

information on creating and managing a Google or YouTube application, see your Google

developer account documentation.

Configuring a YouTube v3 Publication Account

If you use a YouTube profile created before April 2015, you can follow the procedures described

in “Configuring a YouTube Publication Account” on page 88. For new profiles, you can use the

Avid Media Distribute Integration application to generate the necessary access token and refresh

token. MediaCentral UX also supplies the following default parameter values when it creates a

new YouTube v3 profile so it can use the Avid application:

•Client Id

• Client Secret

•Scopes

• Redirect URI

nTo use the Avid Media Distribute Integration application to generate default values for your

YouTube v3 account, you must be logged in to the Google account you use for publishing videos

from Media Distribute.

If you want to create your own YouTube application, you can replace the profile parameter

values with those copied from your YouTube application. You need to generate the Client ID and

Client Secret from the OAuth 2.0 credentials in the Credentials Web page in the APIs and auth

section of your application in the Google Developers Console. You also need to supply the

values for the Scopes and Redirect URI parameters. For more information, see the Google

Developers documentation.

To configure MediaCentral UX for your YouTube v3 account:

1. Log on to your Google account at https://accounts.google.com/.

2. Sign in to MediaCentral UX as an administrator.

3. Select System Settings from the Layout selector.

The System Settings layout opens.

Configuring a YouTube v3 Publication Account

4. In the Settings pane select Media Distribute > Profiles.

The Settings pane displays the settings in that group.

5. Click the Publication Type menu and select YouTube v3.

6. Click the + (plus) button in the Details section.

A YouTube v3 profile named “New Profile” is created in the Details section, and the

following parameter fields are automatically filled by default:

-Client ID

- Client Secret

-Scopes

- Redirect URI

7. Specify a Profile Name by typing a descriptive name for your profile.

Configuring a YouTube v3 Publication Account

8. Click Get Tokens.

The Avid Media Distribute Integration application opens a Web page asking permission to

manage your YouTube account. This allows the application to generate the necessary access

tokens so you can publish videos to your YouTube account.

nIf you already received the access and refresh tokens, clicking Get Tokens does not supply you

with new tokens. You need to click Revoke Tokens, and then click Get Tokens.

9. Click Allow.

The Avid Media Distribute Integration application generates the access tokens and displays

them on the application Web page.

10. Copy the Access Token value to the parameter field for Access Token in your MediaCentral

YouTube v3 profile.

11. Copy the Refresh Token value to the parameter field for Refresh Token in your

MediaCentral YouTube v3 profile.

12. Click Transcoding Profile and select one of the available profiles.

Configuring a Brightcove Account

13. Click Verify Profile Settings to validate the profile settings.

If your profile is valid, a message displays: “Profile configurations is valid.” If any settings

are incorrect, a message displays and indicates which fields are incorrect. All invalid settings

names change to red.

14. Click Apply to save the profile.

The profile displays in the Details section with the new information.

If you are editing a profile, click Revert to return to the original settings. If you want to

delete a profile, select the profile and click the minus (-) button in the Details section.

Configuring a Brightcove Account

Before you can publish a package to Brightcove from MediaCentral UX using Media Distribute,

you must first set up a Brightcove account to which you want to publish, and you must configure

the Brightcove Media API settings for your account.

The following procedures assume you have created a Brightcove account at

http://www.brightcove.com/en/.

nYou must have a paid Brightcove account to use the Brightcove Video Cloud Media API to

publish packages from MediaCentral UX to the Brightcove service.

The Media Distribute settings for Brightcove allow you to select some rendition options when

you publish to your Brightcove account. A rendition is a copy of your video transcoded to a

specific bit rate and resolution. If your video is supported for transcoding, you can use

Media Distribute to create multiple renditions as specified in your transcoding profile. If you use

a video with the H.264 format, you can also retain this format as a rendition when you create

multiple renditions.

Configuring a Brightcove Account

To set up a Brightcove account for MediaCentral UX multi-platform delivery:

1. Log on to your Brightcove account, and click the Account Settings tab.

The Account Settings Web page opens.

2. In the navigation panel on the left, click API Management.

The API Management Web page opens.

3. To create tokens, do the following:

a. Click the Add a: menu and select Read Token with URL Access, and then click Add.

b. Click the Add a: menu and select Write Token, and then click Add.

The tokens appear in the Token list.

4. Save the following parameter fields from the API Management Web page so you can enter

them in the appropriate location in the MediaCentral UX settings:

- Read Token with URL Access

- Write Token

To configure MediaCentral UX for your Brightcove account:

1. Sign in to MediaCentral UX as an administrator.

2. Select System Settings from the Layout selector.

The System Settings layout opens.

Configuring a Brightcove Account

3. In the Settings pane select Media Distribute > Profiles.

The Settings pane displays the settings in that group.

4. Click the Publication Type menu and select Brightcove.

5. Click the + (plus) button in the Details section.

A Brightcove profile named “New Profile” is created in the Details section.

6. Specify the required settings, using the parameter fields you copied from your Brightcove

API Management Web page:

- Profile Name (type a descriptive name for your profile)

-Read Token

- Write Token

7. Click Transcoding Profile and select one of the available profiles.

8. (Optional) If you want to create multiple transcoded versions of your media as specified in

your transcoding profile, select Create multiple renditions.

9. (Optional) If you want to keep a copy of your video at the source H.264 rendition in addition

to any other renditions created, select Preserve source rendition. This option is selected by

default.

Configuring a Kaltura Account

100

10. Click Verify Profile Settings to validate the profile settings.

If your profile is valid, a message displays: “Profile configurations is valid.” If any settings

are incorrect, a message displays and indicates which fields are incorrect. All invalid settings

names change to red.

11. Click Apply to save the profile.

The profile displays in the Details section with the new information.

If you are editing a profile, click Revert to return to the original settings. If you want to

delete a profile, select the profile and click the minus (-) button in the Details section.

Configuring a Kaltura Account

Before you can publish a package to Kaltura from MediaCentral UX using Media Distribute, you

must first set up a Kaltura account to which you want to publish, and you must configure the

Kaltura Media API settings for your account.

The following procedures assume you have created a Kaltura account at http://corp.kaltura.com/.

To set up a Kaltura account for MediaCentral UX multi-platform delivery:

1. Log on to your Kaltura account at http://corp.kaltura.com/, and click the Settings tab.

The Account Settings Web page opens.

2. Click Integration Settings tab.

The Integration Settings Web page opens.

Configuring a Kaltura Account

101

3. Save the following parameter fields from the Integration Settings Web page so you can enter

them in the appropriate location in the MediaCentral UX settings:

-Partner ID

- Administration Secret

To configure MediaCentral UX for your Kaltura account:

1. Sign in to MediaCentral UX as an administrator.

2. Select System Settings from the Layout selector.

The System Settings layout opens.

3. In the Settings pane select Media Distribute > Profiles.

The Settings pane displays the settings in that group.

4. Click the Publication Type menu and select Kaltura.

5. Click the + (plus) button in the Details section.

A Kaltura profile named “New Profile” is created in the Details section.

Configuring an Ooyala Account

102

6. Specify the required settings, using the parameter fields you copied from your Kaltura API

Management Web page:

- Profile Name (type a descriptive name for your profile)

-Partner ID

- User ID (your login credential)

- Admin Secret

7. Click Transcoding Profile and select one of the available profiles.

8. Click Verify Profile Settings to validate the profile settings.

If your profile is valid, a message displays: “Profile configurations is valid.” If any settings

are incorrect, a message displays and indicates which fields are incorrect. All invalid settings

names change to red.

9. Click Apply to save the profile.

The profile displays in the Details section with the new information.

If you are editing a profile, click Revert to return to the original settings. If you want to

delete a profile, select the profile and click the minus (-) button in the Details section.

Configuring an Ooyala Account

Before you can publish a package to Ooyala from MediaCentral UX using Media Distribute, you

must first set up an Ooyala account to which you want to publish, and you must check the

Backlot API settings for your account.

The following procedures assume you have created an Ooyala account at

https://backlot.ooyala.com/backlot/web.

Configuring an Ooyala Account

103

To set up an Ooyala account for MediaCentral UX multi-platform delivery:

1. Log on to your Ooyala Backlot account.

The Ooyala Backlot Web page opens.

2. Click the Account tab, and then click the Developers tab.

The Backlot API Web page opens.

3. Save the following parameter fields from the Backlot API Web page so you can enter them

in the appropriate location in the MediaCentral UX settings:

-API Key

- API Secret

To configure MediaCentral UX for your Ooyala account:

1. Sign in to MediaCentral UX as an administrator.

2. Select System Settings from the Layout selector.

The System Settings layout opens.

Configuring an Ooyala Account

104

3. In the Settings pane select Media Distribute > Profiles.

The Settings pane displays the settings in that group.

4. Click the Publication Type menu and select Ooyala.

5. Click the + (plus) button in the Details section.

An Ooyala profile named “New Profile” is created in the Details section.

6. Specify the required settings, using the parameter fields you copied from your Ooyala

Backlot API Web page:

- Profile Name (type a descriptive name for your profile)

-API Key

- API Secret

7. Click Transcoding Profile and select one of the available profiles.

8. Click Verify Profile Settings to validate the profile settings.

If your profile is valid, a message displays: “Profile configurations is valid.” If any settings

are incorrect, a message displays and indicates which fields are incorrect. All invalid settings

names change to red.

Configuring an Atex Polopoly Web CMS Account

105

9. Click Apply to save the profile.

The profile displays in the Details section with the new information.

If you are editing a profile, click Revert to return to the original settings. If you want to

delete a profile, select the profile and click the minus (-) button in the Details section.

Configuring an Atex Polopoly Web CMS Account

Before you can publish a package to Polopoly from MediaCentral UX using Media Distribute,

you must first have a Polopoly account with Atex and set up a Polopoly environment.

You can create multiple Polopoly profiles in the System Settings layout, but you can only

configure one Web CMS account at a time — for example, you can configure MediaCentral UX

either for Polopoly or for WorldNow, but not for both.

The following procedures assume you have already created the necessary Polopoly environment.

See your Polopoly documentation for more information.

To configure your Polopoly server for MediaCentral UX multi-platform delivery:

1. Log on to your Polopoly server using one of the following set of credentials.

-Log in as

root

with the your root password.

-Log in as

centos

with your centos password.

SSH is turned off by default.

2. To make the Polopoly user interface accessible through the server firewall, type to following

to open a port:

iptables -I INPUT 1 -i eth0 -p tcp --dport 8080 -j ACCEPT

3. If the Polopoly services are not running, do the following:

a. Type

and press Return.

b. At the prompt, type the password you used to log in to the server.

c. Start the MySQL database by typing the following:

/usr/local/mysql/support-files./mysql.server start

d. Navigate to the Jboss directory by typing

cd /opt/jboss

and then start Jboss by typing

the following:

bin/run.sh -b 0.0.0.0 &

e. Navigate to the Tomcat directory by typing

cd /opt/tomcat

and then start Tomcat by

typing the following:

bin/startup.sh

Configuring an Atex Polopoly Web CMS Account

106

To configure MediaCentral UX for your Polopoly account:

1. Sign in to MediaCentral UX as an administrator.

2. Select System Settings from the Layout selector.

The System Settings layout opens.

3. In the Settings pane select Media Distribute > Profiles.

The Settings pane displays the settings in that group.

4. Click the Publication Type menu and select Polopoly.

5. Click the + (plus) button in the Details section.

A Polopoly profile named “New Profile” is created in the Details section.

6. Specify the required settings for the following parameter fields:

- Profile Name (type a descriptive name for your profile)

- Server (the name of your Polopoly host — for example, http://localhost :80080)

- User Name (your Polopoly login name)

- Password (your Polopoly login password)

Configuring a WorldNow Web CMS Profile

107

- Service Address (the address of the Polopoly REST service — for example, polopoly)

- External ID (from your Polypoly account settings)

7. Click OVP Profile and select one of the available profiles. OVP profiles are created when

you configure your online video provider settings — for example, when you set up

MediaCentral UX for your Vimeo or YouTube account. For more information, see

“Configuring a Vimeo Publication Account” on page 85 or “Configuring a YouTube

Publication Account” on page 88.

8. Click Verify Profile Settings to validate the profile settings.

If your profile is valid, a message displays: “Profile configurations is valid.” If any settings

are incorrect, a message displays and indicates which fields are incorrect. All invalid settings

names change to red.

9. Click Apply to save the profile.

The profile displays in the Details section with the new information.

If you are editing a profile, click Revert to return to the original settings. If you want to

delete a profile, select the profile and click the minus (-) button in the Details section.

Configuring a WorldNow Web CMS Profile

Before you can publish a package to the WorldNow platform from MediaCentral UX using

Media Distribute, you must first have a WorldNow account and set up a WorldNow environment.

The following procedures assume you have already created the necessary WorldNow

environment. Your WorldNow account provides you with the following information needed to

complete your MediaCentral UX configuration:

• Account user name

• Account password

• Affiliate number

• Producer host

• Ingest FTP host

• Ingest FTP path

• Ingest FTP user name

• Ingest FTP password

Configuring a WorldNow Web CMS Profile

108

The following notes apply to using WorldNow with MediaCentral UX:

• Once you have configured MediaCentral UX for your WorldNow CMS, the fields available

to you in the Web Story pane change to reflect the options and metadata provided by

WorldNow.

• You can create multiple WorldNow profiles in the System Settings layout, but you can only

configure one Web CMS account at a time — for example, you can configure MediaCentral

UX either for WorldNow or for Atex Polopoly, but not for both.

• You can set the default values for some options used when you publish to a WorldNow

account so you do not have to set them in the Web Story pane each time you create a story.

Some values display as automatically selected options and some control the size and

placement of graphics when you attach images to your story. These options correspond to

those available in your WorldNow CMS.

See your WorldNow documentation for more information, or see the WorldNow Web site at

www.worldnow.com.

nA limitation in the current version of Media Distribute might cause an SSLHandshakeException

error to occur and prevent posting video to WorldNow. This is caused by a problem where the

client and server cannot negotiate the desired level of security. To work around this problem, you

can disable SSL validation for HTTPS connections.

To configure MediaCentral UX for your WorldNow account:

1. Sign in to MediaCentral UX as an administrator.

2. Select System Settings from the Layout selector.

The System Settings layout opens.

Configuring a WorldNow Web CMS Profile

109

3. In the Settings pane select Media Distribute > Profiles.

The Settings pane displays the settings in that group.

4. Click the Publication Type menu and select WorldNow.

5. Click the + (plus) button in the Details section.

A WorldNow profile named “New Profile” is created in the Details section.

6. Specify the required settings for the following parameter fields:

- Profile Name (type a descriptive name for your profile)

- Username (your WorldNow login name)

- Password (your WorldNow login password)

- Affiliate Number (from your WorldNow account information)

- Producer Host (from your WorldNow account information)

- FTP Ingest Hostname (from your WorldNow account information)

Configuring a WorldNow Web CMS Profile

110

- FTP Path (optional) — if your ingest FTP location is configured to use a directory other

than the root folder, you can specify a different FTP directory or subdirectory. If the

transcode in/out has not changed, you can leave this setting blank.

- FTP Username (from your WorldNow account information)

- FTP Password (from your WorldNow account information)

7. Click Transcoding Profile and select one of the available profiles.

8. Click Verify Profile Settings to validate the profile settings.

If your profile is valid, a message displays: “Profile configurations is valid.” If any settings

are incorrect, a message displays and indicates which fields are incorrect. All invalid settings

names change to red.

9. Click Apply to save the profile.

The profile displays in the Details section with the new information.

If you are editing a profile, click Revert to return to the original settings. If you want to

delete a profile, select the profile and click the minus (-) button in the Details section.

To set default values in MediaCentral UX for your WorldNow account:

1. Sign in to MediaCentral UX as an administrator.

2. Select System Settings from the Layout selector.

The System Settings layout opens.

Configuring a WorldNow Web CMS Profile

111

3. In the Settings pane select Media Distribute > WorldNow.

The Settings pane displays the WorldNow settings.

4. Select the WorldNow options that you want to use as default values in the Web Story pane.

- Story options can be set to use your Story Headline in some additional areas for your

Web story. You can also select a default classification for your story from the Content

Classification menu.

- Use Headline as Abridged Title

- Use Headline as Browser Title

- Use Headline as Page URL

- Content Classification

- Graphics options control the default size (in pixels) and alignment of images in your

Web story.

- Story Body Image Size

- Summary Image Size

Configuring a WorldNow Web CMS Profile

112

- Summary Image Alignment

- Abstract Image Size

- Abstract Image Alignment

- Video options can be set to use your Headline in some additional areas for your Web

story. You can also enable closed captions for your story and select a default

classification from the Content Classification menu.

- Use Headline as Abridged Title

- Use Headline as Browser Title

- Use Headline as Page URL

- Enable Closed Captioning

- Content Classification

5. Click Apply to save the settings.

The WorldNow options display in the Details section with the new information.

If you are editing your WorldNow settings, click Revert to return to the original settings.

To disable SSL validation:

1. In a terminal window on the master cluster node, type the following to stop ServiceMix:

service avid-mpd stop

2. Navigate to the directory containing the Media Distribute database configuration file:

cd /etc/apache-servicemix

3. Using the Linux text editor, vi, open the avid-mpd-wrapper.conf file for editing:

vi avid-mpd-wrapper.conf

4. Locate the following line in the JVM Parameters section, and then edit the SSL validation to

true:

# wrapper.java.additional.<NUMBER>=-Dmpd.ssl.trust.all=true

5. Press the Escape key to return to command mode, then type

:wq

and press Return to write

and quit the text editor.

6. To restart the Media Distribute service, type the following command:

service avid-mpd restart

Configuring thePlatform Profile

113

Configuring thePlatform Profile

Before you can publish a package to thePlatform® video CMS from MediaCentral UX using

Media Distribute, you must first have an account for thePlatform and set up an administrative

role.

The following procedures assume you have already created the necessary thePlatform

environment. Your thePlatform account provides you with the following information needed to

complete your MediaCentral UX configuration:

• Account user name

• Account password

Once you have configured MediaCentral UX for your thePlatform account, you can use the

fields available to you in a separate thePlatform pane that reflect the options and metadata

provided by thePlatform.

See your thePlatform documentation for more information, or see thePlatform Technical

Resource Center at help.theplatform.com.

To configure MediaCentral UX for your thePlatform account:

1. Sign in to MediaCentral UX as an administrator.

2. Select System Settings from the Layout selector.

The System Settings layout opens.

Configuring thePlatform Profile

114

3. In the Settings pane select Media Distribute > Profiles.

The Settings pane displays the settings in that group.

4. Click the Publication Type menu and select thePlatform.

5. Click the + (plus) button in the Details section.

A new thePlatform profile named “New Profile” is created in the Details section.

6. Specify the required settings for the following parameter fields:

- Profile Name (type a descriptive name for your profile)

- Username (your thePlatform login name)

- Password (your thePlatform login password)

7. Click Transcoding Profile and select one of the available profiles.

8. Click Verify Profile Settings to validate the profile settings.

If your profile is valid, a message displays: “Profile configurations is valid.” If any settings

are incorrect, a message displays and indicates which fields are incorrect. All invalid settings

names change to red.

9. Click Apply to save the profile.

The profile displays in the Details section with the new information.

If you are editing a profile, click Revert to return to the original settings. If you want to

delete a profile, select the profile and click the minus (-) button in the Details section.

Configuring a WordPress CMS Profile

115

Configuring a WordPress CMS Profile

Before you can publish a package to the WordPress® platform from MediaCentral UX using

Media Distribute, you must first set up your WordPress CMS and have a WordPress

administrative account.

The following procedures assume you have already created the necessary WordPress CMS

environment. Your WordPress installation provides you with the following information needed to

complete your MediaCentral UX configuration:

• Blog ID — Media Distribute uses a default blog ID of “1.” If your WordPress configuration

uses multiple blog sites, you might need to assign a different blog ID.

• Administrator account user name

• Administrator account password

• Your WordPress host’s API URL — The default XML-RPC API is

“http://[your_WordPress_IP]/xmlrpc.php. You can disable or reconfigure this URL if

needed.

WordPress allows you to configure your site in many ways and the default Media Distribute

settings might not be appropriate for your corporate needs. See your WordPress administrator or

the WordPress documentation for more information on customizing your account details, or see

the WordPress Web site at wordpress.org.

To configure MediaCentral UX for your WordPress account:

1. Sign in to MediaCentral UX as an administrator.

2. Select System Settings from the Layout selector.

The System Settings layout opens.

Configuring a WordPress CMS Profile

116

3. In the Settings pane select Media Distribute > Profiles.

The Settings pane displays the settings in that group.

4. Click the Publication Type menu and select WordPress.

5. Click the + (plus) button in the Details section.

A WordPress profile named “New Profile” is created in the Details section.

6. Specify the required settings for the following parameter fields:

- Profile Name (type a descriptive name for your profile)

- Blog ID (from your WordPress configuration information — the default blog ID is “1”)

- Username (your WordPress administrator login name)

- Password (your WordPress administrator login password)

- Host’s API URL (from your WordPress configuration information — usually this is

your WordPress URL followed by

/xmlrpc.php

)

7. Click Transcoding Profile and select one of the available profiles.

Configuring an InternetBroadcasting CMS Profile

117

8. Click Verify Profile Settings to validate the profile settings.

If your profile is valid, a message displays: “Profile configurations is valid.” If any settings

are incorrect, a message displays and indicates which fields are incorrect. All invalid settings

names change to red.

9. Click Apply to save the profile.

The profile displays in the Details section with the new information.

If you are editing a profile, click Revert to return to the original settings. If you want to

delete a profile, select the profile and click the minus (-) button in the Details section.

Configuring an InternetBroadcasting CMS Profile

Before you can publish a package to the InternetBroadcasting Digital Publishing Platform from

MediaCentral UX using Media Distribute, you must first set up your InternetBroadcasting CMS

and have an InternetBroadcasting administrative account.

The following procedures assume you have already created the necessary

InternetBroadcasting CMS environment. Your InternetBroadcasting installation provides you

with the following information needed to complete your MediaCentral UX configuration:

• User name and password — You need InternetBroadcasting account credentials to publish a

media package to the CMS.

• API Key — Use the contribution API key provided by your InternetBroadcasting account.

• Content Path — Media Distribute uses this path to the InternetBroadcasting CMS to upload

the content of your package.

• Category Path — If you use InternetBroadcasting categories, Media Distribute can retrieve

the categories located at this path on the InternetBroadcasting server.

For more information, see your InternetBroadcasting CMS administrator.

To configure MediaCentral UX for your InternetBroadcasting account:

1. Sign in to MediaCentral UX as an administrator.

2. Select System Settings from the Layout selector.

The System Settings layout opens.

Configuring an InternetBroadcasting CMS Profile

118

3. In the Settings pane select Media Distribute > Profiles.

The Settings pane displays the settings in that group.

4. Click the Publication Type menu and select InternetBroadcasting.

5. Click the + (plus) button in the Details section.

A InternetBroadcasting profile named “New Profile” is created in the Details section.

6. Specify the required settings for the following parameter fields:

- Profile Name (type a descriptive name for your profile)

- Username (your InternetBroadcasting administrator login name)

- Password (your InternetBroadcasting administrator login password)

- API Key (from your InternetBroadcasting configuration information)

- Content Path (the path to the location in the InternetBroadcasting Library where the

uploaded media is placed)

- Category Path (the path to the location in the InternetBroadcasting Library where the

Categories are stored)

7. Click Transcoding Profile and select one of the available profiles.

Configuring a Generic CMS Profile

119

8. Click Verify Profile Settings to validate the profile settings.

If your profile is valid, a message displays: “Profile configurations is valid.” If any settings

are incorrect, a message displays and indicates which fields are incorrect. All invalid settings

names change to red.

9. Click Apply to save the profile.

The profile displays in the Details section with the new information.

If you are editing a profile, click Revert to return to the original settings. If you want to

delete a profile, select the profile and click the minus (-) button in the Details section.

Configuring a Generic CMS Profile

The Generic CMS profile allows you to integrate a third-party, unsupported CMS with Media

Distribute. Depending on how you configure your Generic CMS profile, you can deliver media

files to your FTP location using one of two methods:

• If you select Archive in the settings, the profile creates a compressed (ZIP) file containing an

XML file with profile information and metadata, as well as an image file (PNG) and a video

file (MP4) if images and video are included in the media package. Media Distribute then

delivers the file to your FTP location.

nYou must select a transcoding profile in order to create the MP4 video file.

• If you want to deliver images and video to separate FTP locations, you can specify settings

to send images and video to different servers or to different folders on your FTP server. An

XML file also is delivered to the principal FTP host indicated in the profile settings. If you

do not specify separate image and video FTP locations, all files are delivered to the principal

FTP location.

nIf you load an image from the Media pane, the profile retrieves image and video metadata and

stores it with the image. You can view the metadata in the Metadata pane. If you load an image

from a local disk, only basic metadata is included with the information sent to your FTP site.

You need to develop a proxy target that can receive the files from the FTP location listed in the

profile and then deliver them to a CMS using proper API.

The Generic CMS profile should be used only by Avid personnel. See your Avid professional

services representative for more information.

Configuring a Generic CMS Profile

120

To configure MediaCentral UX for a Generic CMS profile:

1. Sign in to MediaCentral UX as an administrator.

2. Select System Settings from the Layout selector.

The System Settings layout opens.

3. In the Settings pane select Media Distribute > Profiles.

The Settings pane displays the settings in that group.

4. Click the Publication Type menu and select GenericCMS.

Configuring a Generic CMS Profile

121

5. Click the + (plus) button in the Details section.

A Generic CMS profile named “New Profile” is created in the Details section.

6. Specify the required settings, using the configuration on your CMS and FTP configuration:

- Profile Name (type a descriptive name for your profile)

- Provider ID (The provider ID identifies your CMS and is included in the XML file

created by the profile. If your CMS does not require a specific provider ID, you can type

any name in this field.)

- FTP Hostname (your CMS server hostname)

- FTP Path (for incoming files, from your video host transcoding configuration)

- FTP Username (from your video host transcoding configuration)

- FTP Password (from your video host transcoding configuration)

7. (Optional) Click Transcoding Profile and select one of the available profiles. Transcoding

profiles are created when you configure your transcoding host — for example, when you set

up MediaCentral UX for the Telestream Vantage video transcoder. For more information,

see “Configuring the Transcode Route” on page 36.

8. (Optional) Click OVP Profile and select one of the available profiles. OVP profiles are

created when you configure your online video provider settings — for example, when you

set up MediaCentral UX for your Vimeo or YouTube account. For more information, see

“Configuring a Vimeo Publication Account” on page 85 or “Configuring a YouTube

Publication Account” on page 88.

Configuring a Generic CMS Profile

122

9. Do one of the following:

tIf you want to send image and video metadata to the FTP host in a single compressed

ZIP file, select Archive.

tIf you want to deliver the image and video, along with the image and video metadata, to

separate FTP sites, specify the following optional settings:

- Image FTP Host (the FTP server hostname for delivery of image files and metadata)

- Image FTP Path (the path on your FTP server that you want to use for delivery of image

files and metadata)

- Image FTP Login (the account name used to log in to your FTP server)

- Image FTP Password (the password for your FTP server account)

- Video FTP Host (the FTP server hostname for delivery of video files and metadata)

- Video FTP Path (the path on your FTP server that you want to use for delivery of video

files and metadata)

Configuring a Generic CMS Profile

123

- Video FTP Login (the account name used to log in to your FTP server)

- Video FTP Password (the password for your FTP server account)

10. Click Verify Profile Settings to validate the profile settings.

If your profile is valid, a message displays: “Profile configurations is valid.” If any settings

are incorrect, a message displays and indicates which fields are incorrect. All invalid settings

names change to red.

Configuring a Generic OVP Profile

124

11. Click Apply to save the profile.

The profile displays in the Details section with the new information.

If you are editing a profile, click Revert to return to the original settings. If you want to

delete a profile, select the profile and click the minus (-) button in the Details section.

Configuring a Generic OVP Profile

The Generic OVP profile allows you to post to a third-party, unsupported online video provider

(OVP) using Media Distribute. If you select an OVP profile and a transcode profile, Media

Distribute transcodes your media to the MP4 format and publishes the media to the specified

OVP site. The MP4 media file is contained in a compressed (ZIP) file which also contains an

XML file with a link to the uploaded video. You can select both options to send your media to

both an FTP and an OVP location.

The Generic OVP profile should be used only by Avid personnel. See your Avid professional

services representative for more information.

To configure MediaCentral UX for a Generic OVP profile:

1. Sign in to MediaCentral UX as an administrator.

2. Select System Settings from the Layout selector.

The System Settings layout opens.

Configuring a Generic OVP Profile

125

3. In the Settings pane select Media Distribute > Profiles.

The Settings pane displays the settings in that group.

4. Click the Publication Type menu and select GenericOVP.

5. Click the + (plus) button in the Details section.

A Generic OVP profile named “New Profile” is created in the Details section.

6. Specify the required settings, using the configuration on your FTP configuration:

- Profile Name (type a descriptive name for your profile)

- FTP Hostname (your FTP server hostname)

- FTP Path (for incoming files, from your video host transcoding configuration)

- FTP Username (from your video host transcoding configuration)

- FTP Password (from your video host transcoding configuration)

7. Click Transcoding Profile and select one of the available profiles.

Configuring a Generic OVP Profile

126

8. Click Verify Profile Settings to validate the profile settings.

If your profile is valid, a message displays: “Profile configurations is valid.” If any settings

are incorrect, a message displays and indicates which fields are incorrect. All invalid settings

names change to red.

9. Click Apply to save the profile.

The profile displays in the Details section with the new information.

If you are editing a profile, click Revert to return to the original settings. If you want to

delete a profile, select the profile and click the minus (-) button in the Details section.

4Configuring User Profiles for

Media | Distribute

Once your MediaCentral UX administrator had configured your system profiles, you can set up

your user profiles to include your personal accounts for services such as Twitter and Facebook.

User roles allow you to publish your packages automatically and without the requirement of

review and approval.

For examples of creating user profiles, see the following topics:

•“Configuring a User Profile for a Personal Twitter Account” on page 128

•“Configuring a User Profile for a Personal Facebook Account” on page 130

Configuring a User Profile for a Personal Twitter Account

128

Configuring a User Profile for a Personal Twitter

Account

The following procedures assume you have created a Twitter account at https://twitter.com.

To set up a user profile for Twitter:

1. Sign in to MediaCentral UX.

2. Select Home > User Settings.

The User Settings dialog box opens.

3. In the Name pane, select Media Distribute.

4. Click the Publication Type menu and select Twitter.

5. Click the + (plus) button in the Details section.

A Twitter profile named “New Profile” is created in the Details section.

6. Specify the required settings, using the parameter fields from your Twitter application Web

page or from your Twitter profile in the MediaCentral UX System Settings layout (see

“Configuring a Twitter Publication Account” on page 66):

-Profile Name (type a descriptive name for your profile)

- Access Token

- Access Secret

Configuring a User Profile for a Personal Twitter Account

129

-Consumer Key

- Consumer Secret

7. Click Verify Profile Settings to validate the profile settings.

If your profile is valid, a message displays: “Profile configurations is valid.” If any settings

are incorrect, a message displays and indicates which fields are incorrect. All invalid settings

names change to red.

8. Click Apply to save the profile.

The profile displays in the Details section with the new information.

If you are editing a profile, click Revert to return to the original settings. If you want to

delete a profile, select the profile and click the minus (-) button in the Details section.

Configuring a User Profile for a Personal Facebook Account

130

Configuring a User Profile for a Personal Facebook

Account

The following procedures assume you have created a Facebook account at

https://www.facebook.com. User roles allow you to publish your packages automatically and

without the requirement of review and approval.

To set up a user profile for Facebook:

1. Sign in to MediaCentral UX.

2. Select Home > User Settings.

The User Settings dialog box opens.

3. In the Name pane, select Media Distribute.

4. Click the Publication Type menu and select Facebook.

5. Click the + (plus) button in the Details section.

A Facebook profile named “New Profile” is created in the Details section.

6. Specify the required settings, using the parameter fields from your Facebook Apps Web

page or from your Facebook profile in the MediaCentral UX System Settings layout (see

“Configuring a Facebook Publication Account” on page 72).

-Profile Name (type a descriptive name for your profile)

- FB Profile ID

Configuring a User Profile for a Personal Facebook Account

131

- Application ID

- Application Secret

- Access Token

- (Optional) Album ID

nYou can specify the name of a Facebook album if you want to publish images directly to an album

that you have created for your Facebook account.

7. (Optional) Click Get Expiration Date.

Media Distribute checks the expiration date of your access token and updates the entry in the

Expiration Date field. This shows you how much time is left on your Facebook access token.

8. (Optional) Click Get Long-Term Token.

Media Distribute converts your access token, which often remains valid for a couple of

hours, to a long-lived token. For more information on short-lived and long-lived tokens and

their expiration periods, see your Facebook developer documentation.

9. Click Verify Profile Settings to validate the profile settings.

If your profile is valid, a message displays: “Profile configurations is valid.” If any settings

are incorrect, a message displays and indicates which fields are incorrect. All invalid settings

names change to red.

10. Click Apply to save the profile.

The profile displays in the Details section with the new information.

If you are editing a profile, click Revert to return to the original settings. If you want to

delete a profile, select the profile and click the minus (-) button in the Details section.

AMedia | Distribute Checklist

Media Distribute Pre-Flight Checklist

Component Notes

MCS Server

Server name

IP Address

Administrator User / Password

MediaCentral | UX Version Must be MediaCentral UX 2.2.

Media Distribute

First Install, Reinstall, or Update?

Twitter Capture data below for each independent Twitter endpoint

Site URL Public URL for the Twitter application

Profile Name Descriptive name for the Twitter Profile

Profile Type User Account or House Account

Access Token

Access Token Secret

Consumer Key

Consumer Secret

Facebook Capture data below for each independent Facebook endpoint

Site URL

Profile Name

Profile Type User Account or House Account

133

Facebook Profile ID

Application ID

Application Secret

Access Token

Album ID

Facebook Page Capture data below for each independent Facebook endpoint

Site URL

Profile Name

Profile Type User Account or House Account

FB Profile ID

FB Page ID

Application ID

Application Secret

Access Token

Album ID

Send to Playback Capture data below for each independent STP endpoint

Profile Name

Target VCID See list in “Send to Playback Configuration for Media | Distribute” on

page 45.

Audio Direct, Stereo, or Mono

Audio Bit Depth 16 or 24

Audio Target Sample Rate 32000, 44100, 48000, or 96000

Shared ISIS Workspace The STP service requires this ISIS workspace to store video prior to

delivery to the transcode service. Type the name of a valid shared ISIS

workspace.

Media Distribute Pre-Flight Checklist

Component Notes

134

Transfer Manager Host You can use the values from your Transfer Manager configuration.

For more information, see the Interplay | Transfer Setup and User's

Guide.

Transfer Manager Destination

Profile

Transfer Manager Profile Type Frame, IFrameAMS, LongGoP, or LongGoPAMS

Mixing Down FTP Host Type the FTP host name.

Mixing Down FTP Path Type the path to the FTP destination where MXF output is staged for

transcode.

Mixing Down FTP Username Type the user name for your FTP service credentials.

Mixing Down FTP Password Type the password for your FTP service credentials.

Interplay Profile

Profile Name

Interplay Web Services Hostname

Interplay Host

Interplay Workgroup Name

User Name

Password

Vimeo Capture data below for each independent Vimeo endpoint

Profile Name

Access Token

Access Secret

Consumer Key

Consumer Secret

Transcoding Profile Profile obtained from Transcoder configuration.

YouTube Capture data below for each independent YouTube endpoint

Profile Name

Media Distribute Pre-Flight Checklist

Component Notes

135

Application Name

Developer Key

User Name

Password

Transcoding Profile Profile obtained from Transcoder configuration.

YouTube v3 Capture data below for each independent YouTube v3 endpoint

Profile Name

Client Id Auto-filled with default values. You can change these if you use your

own Google application.

Client Secret Auto-filled with default values. You can change these if you use your

own Google application.

Access token Supplied by the Avid Media Distribute Integration application.

Refresh token Supplied by the Avid Media Distribute Integration application.

Scopes Auto-filled with default values. You can change these if you use your

own Google application.

Redirect URI Auto-filled with default values. You can change these if you use your

own Google application.

Transcoding Profile Profile obtained from Transcoder configuration.

Brightcove

Profile Name

Read Token

Write Token

Transcoding Profile Profile obtained from Transcoder configuration.

Kaltura

Profile Name

Partner ID

User ID

Media Distribute Pre-Flight Checklist

Component Notes

136

User Secret

Administrator Secret

Transcoding Profile Profile obtained from Transcoder configuration.

Atex Polopoly

Profile Name

Server Name http:// (the name of your Polopoly host)

User Name Your Polopoly login name

Password Your Polopoly login password

Service Address Address of the Polopoly REST service

External ID

OVP Profile

WorldNow

Profile Name

User Name Your WorldNow login name

Password Your WorldNow login password

Affiliate Number From your WorldNow account information

Producer Host From your WorldNow account information

FTP Ingest Hostname From your WorldNow account information

FTP Username From your WorldNow account information

FTP Password From your WorldNow account information

Transcoding Profile Profile obtained from Transcoder configuration.

WordPress

Profile Name

Blog ID From your WordPress configuration information

Username Your WordPress administrator login name

Media Distribute Pre-Flight Checklist

Component Notes

137

Password Your WordPress administrator login password

Host’s API URL From your WordPress configuration information

Transcoding Profile Profile obtained from Transcoder configuration.

InternetBroadcasting

Profile Name

Username Your InternetBroadcasting administrator login name

Password Your InternetBroadcasting administrator login password

API Key From your InternetBroadcasting configuration information)

Content Path The path to the location in the InternetBroadcasting Library where the

uploaded media is placed

Category Path The path to the location in the InternetBroadcasting Library where the

Categories are stored

Transcoding Profile Profile obtained from Transcoder configuration.

Bitly

Profile Name

API Key

Transcoding

Transcode share hostname ftp://hostname. For more information, see “Configuring the Video

Transcoding Host” on page 40.

Telestream Vantage Capture data below for each independent transcoder profile

Profile Name

Workflow ID From your Vantage workflow configuration

Host Name

FTP User Name From Video Transcoding Configuration

FTP Password From Video Transcoding Configuration

FTP Transcode/In Path For incoming files, from your video host transcoding configuration

Media Distribute Pre-Flight Checklist

Component Notes

138

FTP Transcode/Out Path For outgoing files, from your video host transcoding configuration

File Share In Path From your video host transcoding configuration

Harmonic ProMedia Carbon Capture data below for each independent transcoder profile

Profile Name

Workflow ID From your CarbonCoder profile

Host Name Your CarbonCoder hostname

FTP User Name From your video host transcoding configuration

FTP Password From your video host transcoding configuration

FTP Transcode/In Path For incoming files, from your video host transcoding configuration

FTP Transcode/Out Path For outgoing files, from your video host transcoding configuration

File Share In Path From your video host transcoding configuration

RadiantGrid Capture data below for each independent RadiantGrid transcoding

profile

Profile Name

RadiantGrid User Name From your RadiantGrid profile

RadiantGrid Password From your RadiantGrid profile

Transcoding Profile Name The profile name listed on the Workflow > Transcode Web page of

your RadiantGrid configuration)

Host Name The RadiantGrid server hostname

FTP User Name From your video host transcoding configuration

FTP Password From your video host transcoding configuration

FTP Transcode/In Path For incoming files, from your video host transcoding configuration

FTP Transcode/Out Path For outgoing files, from your video host transcoding configuration

File Share In Path From your video host transcoding configuration

Media Distribute Pre-Flight Checklist

Component Notes

139

thePlatform Capture data below for each independent thePlatform profile

Profile Name

Username Your thePlatform login name

Password Your thePlatform login password

Transcoding Profile Profile obtained from Transcoder configuration.

Generic CMS

Profile Name

Provider ID The provider ID identifies your CMS and is included in the XML file

created by the profile.

FTP Hostname Your CMS server hostname

FTP Path From your video host transcoding configuration

FTP Username From your video host transcoding configuration

FTP Password From your video host transcoding configuration

Transcoding Profile Profile obtained from Transcoder configuration.

OVP Profile Profile obtained when you configure your online video provider

settings

Image FTP Host FTP server hostname for delivery of image files and metadata

Image FTP Path Path on your FTP server that you want to use for delivery of image

files and metadata

Image FTP Login Account name used to log in to your FTP server

Image FTP Password Password for your FTP server account

Video FTP Host FTP server hostname for delivery of video files and metadata

Video FTP Path Path on your FTP server that you want to use for delivery of video

files and metadata

Video FTP Login Account name used to log in to your FTP server

Video FTP Password Password for your FTP server account

Media Distribute Pre-Flight Checklist

Component Notes

140

Generic OVP

Profile Name

FTP Hostname Your FTP server hostname

FTP Path From your video host transcoding configuration

FTP Username From your video host transcoding configuration

FTP Password From your video host transcoding configuration

Transcoding Profile Profile obtained from Transcoder configuration.

Media Distribute Pre-Flight Checklist

Component Notes

BWorking with Media | Distribute Logs

Media Distribute provides you with logging capabilities to help you troubleshoot problems with

your installation. Working with the Media Distribute debug logging level can give you more

information to resolve issues.

Enabling the debug logging level increases the amount of logging information saved to the

system. You can configure Media Distribute logging to adjust the maximum size of the log files

or the maximum number of files saved on the system.

nBy default, Media Distribute sets the logging level to INFO.

When you change the logging level, the changes are applied immediately to your system, and

you do not need to restart any Media Distribute services.

To enable the debug logging level:

1. Open a terminal window and log in as root to the server where you installed Media

Distribute.

2. Navigate to the directory containing the logging configuration file:

cd /usr/share/apache-servicemix/etc

3. Using the Linux text editor, vi, open the org.ops4j.pax.logging.cfg file for editing:

vi org.ops4j.pax.logging.cfg

4. Locate the following line, and then navigate using the arrow keys to the INFO parameter:

log4j.rootLogger=INFO, out, osgi:VmLogAppender

5. Type

(lower case “i”) to enter insert mode, and then use the arrow keys and backspace to

erase INFO and replace it with DEBUG.

log4j.rootLogger=DEBUG, out, osgi:VmLogAppender

nTo disable the debug logging level, replace DEBUG with INFO.

6. Press the Escape key to return to command mode, then type

:wq

and press Return to write

and quit the text editor.

The change is applied immediately. You do not need to restart any Media Distribute services.

142

To change the default log file size:

1. Open a terminal window and log in as root to the server where you installed Media

Distribute.

2. Navigate to the directory containing the logging configuration file:

cd /usr/share/apache-servicemix/etc

3. Using the Linux text editor, vi, open the org.ops4j.pax.logging.cfg file for editing:

vi org.ops4j.pax.logging.cfg

4. Locate the following line, and then navigate using the arrow keys to the 10MB parameter:

log4j.appender.out.maxFileSize=10MB

5. Type

(lower case “i”) to enter insert mode, and then use the arrow keys and backspace to

erase 10MB and replace it with the appropriate maximum file size.

6. Press the Escape key to return to command mode, then type

:wq

and press Return to write

and quit the text editor.

The change is applied immediately. You do not need to restart any Media Distribute services.

To change the number of log files saved by the system:

1. Open a terminal window and log in as root to the server where you installed Media

Distribute.

2. Navigate to the directory containing the logging configuration file:

cd /usr/share/apache-servicemix/etc

3. Using the Linux text editor, vi, open the org.ops4j.pax.logging.cfg file for editing:

vi org.ops4j.pax.logging.cfg

4. Locate the following line, and then navigate using the arrow keys to the 100 parameter:

log4j.appender.out.maxBackupIndex=100

5. Type

(lower case “i”) to enter insert mode, and then use the arrow keys and backspace to

erase 100 and replace it with the maximum number of files to be saved on the system.

6. Press the Escape key to return to command mode, then type

:wq

and press Return to write

and quit the text editor.

The change is applied immediately. You do not need to restart any Media Distribute services.

CModifying the Transcoder Monitoring

Interval

Media Distribute uses a default monitoring interval of one minute (60000 ms) for transcode

services (Mixing Down, Mixed Down, and Transcoding). These various transcode processes

display in the status window within the Media Distribute Packages pane for each specific

package that requires video transcoding.

After successful configuration and operation of an Media Distribute instance, you can change

these default monitoring intervals by editing an Media Distribute configuration file.

To modify the transcoder monitoring interval:

1. Open a session on the Media Distribute server.

2. Using Linux commands, navigate to the directory containing the Media Distribute

configuration file:

/etc/apache-servicemix/mpd/com.avid.mpd.cfg

3. Using the Linux text editor, vi, open the com.avid.mpd.cfg file for editing:

vi com.avid.mpd.cfg

144

4. Type

(lower case “i”) to enter insert mode, and then use the arrow keys to position the

cursor at the appropriate location.

5. Edit the monitorMixingdownInterval, monitorMixeddownInterval, and

monitorTranscodingJobsInterval values (the default is 60000).

cDo not modify the monitorLockedEntitiesInterval or lockedEntityTimeToLive values.

Avid recommends that you do not set the interval below 10000 (10 seconds).Setting the

interval to a smaller number might improve the response time for the transcode operation,

but this change can also increase the amount of chatter over the service bus.

6. Press the colon key (:) to return to command mode, then type

to write and quit the text

editor, and press Return.

7. Exit the session.

DModifying the Settings for Interlaced

Graphics

When you attach an image to your media package by clicking the Load from Player button,

Media Distribute takes the image from the frame selected in the Media pane. If your video uses

an interlaced format, this can cause the attached image to display interlacing effects which can

degrade the quality of the image. You can set Media Distribute to deinterlace the graphics file it

receives from the Media viewer by editing the transcoding configuration file.

To change the settings for interlaced graphics:

1. Open a terminal window and log in as root to the server where you installed Media

Distribute.

2. Navigate to the directory containing the transcoding configuration file:

cd /usr/share/apache-servicemix/etc/mpd

3. Using the Linux text editor, vi, open the transcoding.cfg file for editing:

vi transcoding.cfg

4. Locate the following line, and then navigate using the arrow keys to the deinterlacing

parameter:

image.processing.deinterlacing={true,false}

5. Type

(lower case “i”) to enter insert mode, and then use the arrow keys and backspace to

erase the bracketed options (including the brackets) and then type

true

image.processing.deinterlacing=true

6. Press the Escape key to return to command mode, then type

:wq

and press Return to write

and quit the text editor.

7. Restart the Media Distribute services on the server or on all cluster nodes by typing the

following:

service avid-mpd clean-restart

Atex Polopoly

setting up an account 105

Bitly link configuration 65

Brightcove

setting up an account 97

Cluster configuration 10

installing on master node 13

master and non-master nodes 11

Deinterlaced graphics 145

Facebook

setting up a user profile 130

setting up an account 72, 78

Firewall port settings 34

Graphics

deinterlacing 145

Installation

Media Distribute on a single server 20

Media Distribute on the master node 13

Interlacing effects 145

Kaltura

setting up an account 100

Master and non-master nodes 11

Media Distribute

cluster configuration 10

configuration 27

configuration checklist 132

configuring FTP service 40

firewall settings 34

installing on a single server 20

installing on master node 13

master node, identifying 11

pre-flight checklist 132

prerequisites 9

roles 28

security 34

system accounts 64

transcoder monitoring interval 143

user profiles 127

Ooyala

setting up an account 102

Index

147

Polopoly

setting up an account 105

ProMedia Carbon

configuration 57

installation 57

RadiantGrid profile 59

Roles

administrator 28

setting up 28

users 28

Send to playback configuration 45

System accounts

Atex Polopoly 105

Brightcove 97

Facebook 72, 78

Kaltura 100

Ooyala 102

Polopoly 105

Twitter 66

Vimeo 85

YouTube 88, 93

System settings

Media Distribute 38

send to playback 45

Telestream Vantage profile 49

Transcode route

bitly link configuration 65

configuring 36

Harmonic ProMedia Carbon transcoder 57

MediaCentral UX configuration 38

send to playback configuration 45

Telestream Vantage profile 49

Video host configuration 40

Transcoder monitoring interval 143

Twitter

setting up a user profile 128

setting up an account 66

User profiles

Facebook 130

Twitter 128

Vimeo

setting up an account 85

YouTube

setting up an account 88, 93

Avid

75 Network Drive

Burlington, MA 01803-2756 USA

Technical Support (USA)

Visit the Online Support Center at

www.avid.com/support

Product Information

For company and product information,

visit us on the web at www.avid.com

Avid Media | Distribute Installation And Configuration Guide 2.4 ICG 2 4 EN

Navigation menu

Versions of this User Manual:

Views

Navigation