Bryton Rider 530 User's Manual EN

Rider 530 - User's Manual Rider_530_EN Free User Guide for Bryton RIDER Series GPS, Manual

User Manual: bryton Rider 530 - User's Manual Free User Guide for Bryton SmartWatch and Wearable, Manual

Open the PDF directly: View PDF .
Page Count: 48

Download
Open PDF In Browser	View PDF

530
User's Manual

Table of Contents
Getting Started ................ 4

Data Page .................................. 23

Your Rider 530 ............................. 4

Set Alert .................................... 25

Accessories .................................. 5

Smart Pause .............................. 25

Status Icons ................................. 5
Step 1: Charge your Rider 530 ... 6

Data Record .............................. 26
............ 27

Step 2: Turn On Rider 530 ........... 6

............ 28

Step 3: Initial Setup ..................... 6

Change System Settings ........... 29

Step 4: Acquire Satellite
Signals.......................................... 7

View GPS Status ........................ 32

Step 5: Ride Your Bike with
Rider 530...................................... 7
Reset Rider 530 ........................... 7
Share Your Records ..................... 8

Bluetooth................................... 33

Sync Data to/from
Bryton App ....................... 9
Training ...........................11
Simple Workouts ....................... 11
Interval Workouts ..................... 12
My Workout ............................... 14
Bryton Test ............................... 14
Stop Training ............................. 15
View Exercise/Training
Record ........................................ 15

Follow Track ....................18
Create Track ............................... 18
View/Delete Track ..................... 19

Settings ............................21
Smart Lap................................... 21
Altitude ...................................... 22

View Software Version .............. 33
Calibrate the Compass ............. 34
................ 34
Enable File Saving Mode .......... 35
Start Reminder .......................... 35
View Memory Usage ................ 36
Reset Data ................................. 36
Sensors....................................... 37

Wireless Local Area
Network ......................... 38
Appendix ........................ 39
............................ 39
Battery Information .................. 40
Install Rider 530 .......................... 41
Install the Speed/Cadence/
Dual Sensor (Optional) ............. 42
Install Heart Rate Belt
(Optional)................................... 43
Wheel Size and
Circumference ........................... 44
Basic Care For Your Rider 530 ... 45
Data Fields ............... 46
2

Table of Contents

ENGLISH

WARNING

Always consult your physician before you begin or modify any training program. Please read
the details in Warranty and Safety Information guide in the package.

Download Bryton App
Scan below QR Code to download Bryton App or you can go to Google Play for android/App Store
for iOS to search Bryton App and download it. After adding UUID (16 digit number) on the back of
your device to Bryton account and with access to the internet, your Rider computer automatically
updates GPS data, uploads recorded tracks, downloads planned trips from app server and checks
Note：Please refer to page 9: Sync Data to/from Bryton App to learn more.

http://download.brytonsport.com/inst.html

Australian Consumer Law

Our goods come with guarantees that can not be excluded under the New Zealand and
Australian Consumer Laws. You are entitled to a replacement or refund for a major failure
and for compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality
and the failure does not amount to a major failure.

Getting Started

ENGLISH

Getting Started
This section will guide you on the basic preparations before you start using your Rider 530.
Rider 530 is equipped with barometer which shows the real time altitude.
NOTE: To adjust the altitude settings on Rider 530, refer to page 22.

Your Rider 530
1 ON/OFF (

)

• Press to turn the device on.
•
•

2 LAP/OK (

Speed

)

•

1
Altitude

selection.
• In free cycling, press to start recording.
• When recording, press to mark the lap.

3 BACK (
Ride Time

Distance

)

• Press to return to the previous page or
cancel an operation.
• When recording, press to pause
recording. Press it again to stop
recording.

4 PAGE (

)

• In Menu, press to move down to scroll
through menu options.
• In Meter view, press to switch meter
screen page.
• In Meter view, long press to enter
Shortcut Menu.

5 UP (

)

• In Menu, press to move up to scroll
through menu options.
• In meter view, press to switch meter
screen page.

Getting Started

ENGLISH

Accessories
The Rider 530 comes with the following accessories:
• USB cable

• Bike mount

Optional items:
• Speed sensor
• Heart rate belt
• Speed/Cadence Dual sensor

• F-Mount
• Cadence sensor

Status Icons
Icon

Description

Icon

Description
Heart Rate Sensor Active

Bike Type
1

Bike 1

Cadence Sensor Active

Bike 2

Speed Sensor Active

GPS Signal Status

Dual Sensor Active

Weak signal

Log Record in Progress

Strong signal

Recording is paused

/- - -

Bluetooth function is enabled

Power Status
Full battery
/

Current speed is faster/slower
than average speed

Half battery
Low battery

NOTE: Only the active icons are displayed on the screen.
Some icons may only apply to certain models

Getting Started

ENGLISH

Step 1: Charge your Rider 530
Connect Rider 530 to a PC to charge the battery for at least 4 hours.
Unplug the device when it is fully charged.
• You may see a white screen when the battery is really low. Keep the device plugged for
several minutes, it will automatically turn-on after battery is properly charged.
o
o
• The temperature suitable for charging battery is 0 C ~ 40 C. Beyond this temperature range,
charging will be terminated and the device will draw power from battery.

Speed

reset

Altitude

Ride Time

Distance

Step 2: Turn On Rider 530
Press

to turn on the device.

Step 3: Initial Setup
When turning Rider 530
instructions to complete setup.
1. Select the display language.
2. Select the unit of measurement.

NOTE: Only when you choose English for the display language, you will need to select the
unit of measurement. Otherwise, default would be metric unit.

Getting Started

ENGLISH

Step 4: Acquire Satellite Signals
Once the Rider 530 is turned on, it will automatically search for satellite signals. It may take
30 to 60 seconds to acquire signals. Please make sure you acquire the satellite signal for the
The GPS signal icon (
•

/
icon appears on the screen.

•

Tunnels

Inside rooms,
building, or
underground

Under water

High-voltage
wires or
television
towers

Construction
sites and heavy

NOTE: To improve the GPS accuracy, you can set 1 sec mode as your recording
frequency ( page 26 ) and update GPS regularly by using Bryton Update Tool
( page 8 ) or using Data Sync function ( page 9 ) to update GPS data.

Step 5: Ride Your Bike with Rider 530
• Free ride:
In meter view, measurement starts and stops automatically in sync with the movement
of the bicycle.
• Start an exercise and record your data:
In meter view, press
to start recording, press
to pause, press
again to stop.
NOTE: If you continue to proceed without pressing
to record, Rider 530 would pop
up a reminder to ask you to record when motion of bike is detected. To set the
frequency of start reminder, please go to page 35.
• Start a training:
Select Train from the menu list. Training can be based on time, distance, calories burn, or
the saved workouts.

Reset Rider 530
To reset the Rider 530, long press all three keys (

) at the same time.

Getting Started

ENGLISH

Download Bryton Update Tool
NOTE: Bryton Update Tool can notify you if a new software version or GPS data is available.
The newer GPS data can speed up the GPS acquisition. We highly recommend you to
check for updates every 1-2 weeks.
1. Go to http://www.brytonsport.com/help/start and download Bryton Update Tool .
2. Follow the on-screen instructions to install Bryton Update Tool.

Share Your Records
Share Your Tracks to Strava.com
1. Sign up/log in on Strava.com
a. Go to https://www.strava.com
b. Register a new account or use your current Strava account to log in.
2. Connect to PC
Turn on your Rider 530 and connect it to your computer by USB cable.
3. Share Your Records
a. Click “+” on the top right corner of Strava page and then click “File”.
c. Enter information about your activities and then click “Save & View”.

Getting Started

ENGLISH

Sync Data to/from Bryton App
Add Device UUID to Bryton Account
With access to the internet, your Rider computer automatically updates GPS data, uploads
update. To sync data correctly from/to your device, it is required to add your device UUID (16
digit number on the back of the device)to your Bryton account before syncing data for the

a. Go to Settings>UUID. After entering,
you will see a QR code(It requires
Bryton App scanner to scan it).

b. After installing Bryton App, please sign
up/log in on Bryotn App
Bryton App
xxx@ xxx.com
Password

UUID
666666666666

Note: UUID is the 16
digit number on the back
of the device.

c. After logging in Bryton App, tap “Scan
Now” to scan the QR code appearing on
the device to add UUID to your Bryton
account(or go to Bryton App Settings>
User Settings>UUID).

Note: If you have an Bryton
Sport account, you still have
to register an account to log
in Bryton App successfully.

d. If “Successfully added!” messages pops
up on the Bryton App, it means you have
successfully added your device UUID to
your Bryton account. If not, please press
“Retry”to scan again or enter 16 digit
UUID number on the back of your device
manually.

Bryton App

Add your device
Successfully added!

UUID
666666666666

Note: Each device has
its own unique UUID.
And each UUID can
only be added to 1
Bryton account.

My Devices

UUID
666666666666

6666666666666666

UUID
666666666666

Finish

Data Sync

Connect To A Network
ENGLISH

It is required to set up a connection to a network before syncing data.

Connect
Bryton
My Hotspot
Sweet Home

1. In Main menu, press
and press
.

to select Data Sync

2. Press /
to choose one available network
or hotspot and press
.
3. Press

to enter password and choose
password.

4. A “Connected. Please press any button to exit.”
message pops up. Press any button to start
syncing data.
Note: If a “AP/Password Incorrect” message pops up, it means your saved network is not
available or your password of saved network has been changed. Please go to page 38:
Wireless Local Area Network (WLAN) to learn how to set up a new network connection.

Sync Your Data
To perform Data Sync, please make sure your device UUID is successfully added to your
Bryton app account and connected to a wireless network; then, just let your device smartly
guide you through the syncing process.
First of all, the device will start to update GPS data in your device. Then, if you have planned
trips in Bryton App, it will download the planned trips. Thirdly, it will upload your tracks to
will see a summary of the syncing data.
GPS update

Download trips

4 of 5

Firmware update
1 of 1
Firmware update
available.
Download?

Yes

Upload tracks

3 of 6

Summary
GPS update

trips

5/5 v

tracks

6/6 v

Firmware update 1/1 v

Note: Firmware updates usually take longer time to download and install, select “NO”
if you prefer to update it on your next sync.
Data Sync

Bicycling is one of the best types of exercise for your body. It helps you to burn your calories,
530 Training feature, you can
set simple/interval workouts and use the Rider 530 to track your training or workout progress.
Note: Before setting workouts, please make sure you have input your personal information
into user profile. Please refer to page 27: Personalize User Profile to learn how to change it.

08:08

09/09

Cycling
Data Sync
Follow Track
View History
Settings
Train & Test

1. In the main screen, press

to select

Train&Test.
2. Press

to enter the Training menu.

To Plan
You can set simple workouts by entering your time or distance goals.
The Rider 53

Simple
Simple
Warm Up
Work

10’ 94 ~111

6’ 0” 159 ~171

Cooldwn
10’ 94 ~111

1. To set a simple workout, select
To Plan > Simple > Warm Up, Work ,
Cooldown.
• Warm Up:
Duration (manual, calorie,time, distance),
Target (Pace, HR, MHR, LTHR).
• Work:
Duration (calorie, time,distance), Target
(Pace, MHR%,
• Cooldown:
Duration (manual, calorie,time, distance),
Target (HR, MHR, LTHR).
2. Press

to set your target and press
to confrim.

3. Choose Save and enter the workout name
using the on-screen keyboard.
4. Go for a ride.
Go to Train & Test > My Workouts > View
and choose the saved workout. Press
to start training and record log.
Training

ENGLISH

Train & Test

Name

ENGLISH

Using the On-screen Keyboard

Name
abc

123
ABC
a

•

NOTE:

Interval Workouts

Warm Up
Duration

Train & Test
To Plan

Target
OK

Interval

Yes
OK

Training

Work
6’00”

158~170bmp

Recovery
2’00”

137~149bpm

Repeat Time
2

Cooldown
Duration
Target
OK

3. Set the interval workout settings (Work,
Recovery
press
to select Next and press
.

ENGLISH

Work 1

4. A “Create a new main set?” message appears
on the screen. To creat another set of interval
workout, select Yes
5. A “Set cool down?” message appears on the
screen. Select Yes to set the “Cool down”.
After the settings are complete, select OK and
press
to continue.
6. A “Save to My Workout” message appears on
the screen. Select Yes and press
to continue.
Press / to enter the workout name. When
save the workout.

Training

ENGLISH

My Workout
To Plan

My Workout
View

Delete
Delete All
Delete
Delete All

NOTE:
"Start"

Bryton Test
Bryton Test has preloaded on Rider 530. If you don't have it on your device, please download
from Bryton Update Tool. Bryton Test includes two test courses to help you measuring your
MHR, LTHR, FTP and MAP. Knowing your MHR, LTHR, FTP and MAP gives you a benchmark of
your overall efficiency. It also helps you to judge progress over time and measure your exercise
intensity.
Train & Test
Bryton Test

NOTE:
will be changed accordingly.

Training

ENGLISH

Stop Training
You can stop the current training after you have reached your goal or when you decide to
end the current training.

r
p
m

Do you want
to stop?

1. Press
press

to pause the recording and
again to stop the recording.

2. A “Do you want to stop?” message
appears on the screen. To stop the current
training, press /
to select Yes and
press

Yes

View Exercise/Training Record
Rider 530 provides graphical track summary, detail workout data , lap data and graphical analysis
for you to have better idea of your workout performance.

Summary
To view workout summary:
1. In the main screen, press
to select
View History > View and press
.
2. Press
to select an activity history from
the list and press
to enter.
3. Select Summary and press
workout summary.

to view

NOTE: You can also upload your history to Bryton Mobile APP to keep track of all your ride
data.

Training

To view detail workout:

Detail
Time
Trip Time
Ride TIme

04:50:38
04:12:26

Distance
Distance

Speed
AvgSpd

18.9

km/h

MaxSpd
Altitude
Alt. Gain
Alt. Loss

ENGLISH

Detail
1. In the main screen, press
to select
View History > View and press
.
to select an activity history from
2. Press
the list and press
to enter.
3. Select Detail and press
detail workout.

to view

2201 m
400 m

Lap
Lap
Lap

Dist. Speed Time

km km/h
10.0 16.4 36:25

10.0 15.7 38:10

3
5

10.0 14.9 40:05
10.0 15.4 38:43
10.0 15.2 39:17

10.0 14.9 40:15

7
8

10.0 15.3 39:05
08.0 29.0 20:38

To view lap data:
1. In the main screen, press
to select
View History > View and press
.
2. Press
to select an activity history from
the list and press
to enter.
3. Select Lap and press

to view lap data.

Training

ENGLISH

Analysis
To view graphical analysis.
1. In the main screen, press
to select View History > View and press
2. Press
to select an activity history from the list and press
to enter.

3. Select Analysis and press
to start viewing graphical analysis.
4. Press
to view analysis of Altitude, Speed, Heart Rate, Cadence and Power.
Speed

Altitude

Heart Rate

133
45

180

120

21.7

Cadence

21.7

Power

150

540

100

360

180

21.7

Delete History
To delete your history:

View
2016/06/06
22.8km

1. In the main screen, press

14:28
0345:04

Do you

2016/06/06
want to 14:54
20.2km

delete ?

2016/06/06
15.6km

Yes

2016/05/28
10.2km

0345:35

14556
0344:51

15:30
00:32:45

to select
View History > Delete and press

2. Press
to select an activity history from
the list and press
to delete the
selected history.
3. A “ Do you want to delete? ” message appears
on the screen. To delete the data, press
to select Yes and press

Training

ENGLISH

Follow Track
Rider 530 provides 3 ways for you to create tracks: 1. Plan trips via Bryton App. 2. Use
previous rides from History. 3. Download .gpx tracks online. With turn by turn navigation

Note: Turn by turn navigation function only supports trips planned by Bryton App.

Create Tracks
Plan Trips via Bryton App
1. On Bryton App, tap “Plan Trip”and enter
the city, location or street name to search
the location.
2. Tap”
“ , Bryton App will plan the trip
starting from your location to destination.
If you would like to change start point, tap
From Your Location to edit.
3. Tap “

” to upload planned trips to server.

4. If you would like to edit the name of your trips,
tap the default name to edit.
5. Tap “Upload
6. Download the planned trips to the device via
Data Sync.
7. In the device Main Menu, select Follow Track
> View and select the planned trip and press
to start following the track.
Note: Please refer to page 9~11 to learn how to download planned trips via Data Sync.

From Device History

View
Summary
Detail
Lap
Analysis
Create track

1. In the Main Menu, select View History > View
and press
to select the desired tracks and
press
to confrim selection.
2. Press

to select Create track.

3. Enter a name of the track and select “
press
to save it.
4. Press

” and

to be back to the Main Menu.

5. In Main Menu, select Follow Track > View
and select the saved track and press
to start following the track.
Follow Track

ENGLISH

From 3rd Party Websites
1.
2. Use USB cable to connect the device to your
computer.
3.
them to the ExtraFiles folder of the device.
4. Remove USB cable.
5. In the device Main Menu, select Follow Track
> View and select the planned trip and press
to start following the track.

Note:

View/Delete Track
You can veiw and delete your tracks.

Follow Track
View
Delete

View Tracks:
1. In Main Menu, press
to select
Follow Track>View and press

2. Press
to select the track and press
to view the track.

Delete All

Follow Track

Delete Your Tracks：

Al to New Orleans

1. In the Main Menu, press
Track >Delete and press

Great
Do River
you want

2. Press

to delete?

Glacier

Yes

Yellowstone

to select Follow
.

to choose the track and press

3. A message “Do you want to delete?” pops up.
Press /
to select Yes and press

Follow Track 20

ENGLISH

Delete

With the Settings feature, you can customize exercises settings, altitude, general settings,
sensor settings, bike and user pr

Settings

Exercises
UUID
General
Sensors
Altitude
Profile
1. In the main screen, press
2. Press

to select Settings.

to enter the Settings menu.

Smart Lap
With Smart

Lap by Location
By Location
Use current
location as
Lap

Yes

1. In the Settings menu, press
to select
Exercises> Smart Lap and press
.
2. Press
Press

to enter the editing menu.
to select Location and press

3. A “Use current location as lap location?”
message appears on the screen. To save
the data, press
to select Yes and
press
4. Press

to exit this menu.

NOTE:
appears on the screen. Check if the GPS is on and make sure you step outside to acquire
the signal.

Settings 21

ENGLISH

Settings

By Distance

10.0
KM

1. In the Settings menu, press
to select
Exercise > Smart Lap and press
.
2. Press
Press

to enter the editing menu.
/

to select Distance and press

3. Press

/ to select your desired
distance and press

4. Press

to exit this menu.

Altitude
You can set the altitude setting for the current location and four other locations.

Current Altitude

Altitude

1. In the Settings menu, press
to select
Altitude > Altitude and press
.
2. Press / to adjust the desired altitude
and press
setting.
3. Press

to exit this menu.

Note: The value of altitude on the meter mode will be changed once current altitude
is adjusted.

Settings 22

ENGLISH

Lap by Distance

Location 1

1. In the Settings menu, press
to select
Altitude > Location 1, Location 2,
Location 3, Location 4, Location 5
and press
.

Altitude
10m
Calibrate

2. To set the altitude, press

to select

Altitude and press
3. Press / to adjust the desired altitude
setting.
and press
4. To calibrate the set altitude, press
select Calibrate and press to
5. Press

to exit this menu.

Data Page
You can set the display settings for the Meter and Lap.

Meter Display
Data Page

Ride Time

Current
Time

Current
Speed

Current
Time

Total
Distance

3-grid display
1. In the Settings menu, press

Trip Time
Item selection

to select Exercises > Data Page and press

2. Press

to enter Data Page setting and change the setting from Auto to Manual.
.

3. Press

to enter Data Page > Data Page1 , Data Page 2 , Data Page 3 , Data Page 4

or Data Page 5 and press
4. Press

/
Settings 23

ENGLISH

Other Location Altitude

ENGLISH

5. Press
the selection.
6. Press
7. Press

to select the desired setting and press
to exit this menu.

NOTE:
selection.

2-grid display

3-grid display

NOTE: If Data Page is setted as Auto
53
display when detecting the paired sensors.

Lap Display
1. In the Settings menu, press
to select
Exercises > Data Page > Lap> Data Page 1
or Data Page 2 and press
.

Cycle Lap
Data Page 1
On

2. Press

3. Press
you want to customize, and press

to select the number of

Data Page 2

4. Press /
and press

to select the desired setting

5. Press

to exit this menu.

Settings 24

ENGLISH

Set Alert
With the Alert feature, the device displays a message to notify you if:
•
• you exceed or drop below a custom speed setting during your ride.
•
arm per minute (rpm).
• you reach a certain amount of distance for the long workouts.
• you reach a certain amount of time for the long workouts.
1. In the Settings menu, press
Exercises > Alert and press
its submenu.

Alert

to select
to enter

2. Select Time , Distance, Speed, HR , or Cadence

Time

settings.
3. Press

to select the desired setting and

Smart Pause
this can really impact your recorded data. When the function is activated, the time and
distance will automatically pause once you stop moving and resume once you start riding to

Smart Pause
Enable
Yes

1. In the Settings menu, press
to select
Exercises > Smart Pause and press
to enter its submenu.
2. Select Yes to enable the function.

Settings 25

With Data Record function, you can set your odometer and activate 1 second mode to get
more accurate data.

Set ODO
ODO Setup
ODO Setup
All

1. In the Settings menu, press
to select
Exercise > Data Record and press
.
2. Press

to select ODO Setup and press
to enter.

3. Press
to enter its submenu and press
/ to select the desired setting, then

NOTE: "All" means the odometer would show the cumulative distance of all trips;
"Recorded" would only show the cumulative distance of recorded trips.

NOTE: If you would like to reset ODO, please refer to page 29: Reset ODO.

Enable 1sec Mode
Recording

1. In the Settings menu, press
to select
Exercise > Data Record and press
.
2. Press

1 sec mode

to select Recording and press
to enter.

3. Press
to enter its submenu and press
/ to select Yes, and press
4. Press

to exit this menu.

Settings 26

ENGLISH

Data Record

ENGLISH

You can change your personal information.

User Profile
Gender
Male
Birthday
1982/01/01
Height
177 cm

1. In the Settings menu, press
to select
and press
.
2. Press
to select the setting that you
want to change and press
to enter its
submenu.
• Gender: select your gender.
• Birthday : set your Birthday
• Height: set your height.
• Weight: set your weight.
• Max HR: set your maximum heart rate.
• LTHR: set your lactate threshold heart
rate.
• FTP: set your functional threshold
power.
• MAP: set your maximum aerobic
power.
3. Press / to adjust the desired
setting and press
4. Press

to exit this menu.

NOTE:
If you have
no idea about your Max HR/LTHR/FTP/MAP, you can use Bryton Test to test your own
exercise intensity. Please refer to page 14: Bryton Test to learn how to do the test.

Bike 1
Spd Source
Weight
13kg

Wheel
1700mm

1. In the Settings menu, press
to select
Bike
> Bike 1 or Bike 2
and press
.
2. Press
to select the setting that you
want to change and press
to enter its
submenu.
• Spd Source: set the priority of the speed sources
• Weight: set the bike weight.
• Wheel: set the bike wheel size.
• Activate: select to activate the bike.
3. Press
press
4. Press

to adjust the desired setting and
to exit this menu.

Settings

Bike 1

1. In the Settings menu, press

Trip 1

1033km

Trip 2
Ride Time

0km

89:23:28

Bike
.

press
2. Press
press

to select

> Overview and

to select the desired bike and

3. Press

to view more data of the
selected bike.

4. Press

to exit this menu.

Adjust Odometer
Bike 1+2

ODO

1033km

Ride Time
Alt.Gain
Alt.Loss

89:23:28

1. In the Settings menu, press
Bike
.

press

3. Press
4. Press

5740m

5. Press

NOTE: To get to the number faster, you can long press

> Overview and

to select Bike 1+2 and press

2. Press

8600m

to select

to enter into ODO setting page.
/

to adjust ODO and press
to exit this menu.

/ .

Settings 28

ENGLISH

NOTE: For details on wheel size, please refer to page 44 : Wheel Size and Circumference.

ENGLISH

Reset ODO
You can reset the distance of Trip 1, Trip 2 and odometer.
1. In the Settings menu, press

Bike 1

Trip 1

press

1033km

Trip 2Reset?
YES

Ride Time

0km

89:23:28

Bike
.

to select

> Overview and

2. Press
press

to select the desired bike and

3. Press
press

to select trip 1 or trip 2 and press

If you choose Bike 1+2, please select ODO.
4. A messge “Reset?” pops up on your device.
press
to select “YES” and press
to confrim or press / to set ODO to
the desired number.
5. Press

to exit this menu.

Change System Settings
sound,

time/unit , on-screen display language.

Backlight Off

Auto

1. In the Settings menu, press
General >
and press
2. Press /
and press
3. Press
4. Press

NOTE:
If you select Auto or Never as your backlight setting, after pressing

to select

.
to select the desired setting
to activate backlight.
to exit this menu.

to turn on backlight , you can

setting, you can extend another 2 min, 1 min, 30 sec, 15 sec or 5 sec by pressing

again.
Settings

Key Tone

1. In the Settings menu, press
to select
General > System > Key Tone
and press

13kg

ENGLISH

Key Tone

2. Press
/
and press
3. Press

.
to select the desired setting
to exit this menu.

Sound
Sound

to select
1. In the Settings menu, press
General > System > Sound and press
2. Press /
and press

3. Press

to select the desired setting
to exit this menu.

1033km

Settings 30

Dlight Save

Date Format

Time Format

Unit

+0:00

dd/mm/yyyy

24hr

KM,KG

Daylight Save

Date format

Temperature

˚C

Time format

Unit

1. In the Settings menu, press

to select

ENGLISH

Time/Unit

General > System > Time/Unit > Daylight
Save, Date format , Time format , Unit
Temperature and press
.
2. Press
/ to select the desired setting/
format and press
3. Press

to exit this menu.

Temperature

Contrast
You can adjust contrast on your device.

Contrast

1. In the Settings menu, press

to select

General > System > Contrast
and press
2. Press
3. Press

.
to adjust desired contrast.
to exit this menu.

Settings

Language

English
Deutsch
Français
Italiano
Dansk
Nederlands

1. In the Settings menu, press

to select

General > System > Language
and press
2. Press /
and press
3. Press

.
to select the desired setting
to exit this menu.

View GPS Status
You can view the GPS signal information that your device is currently receiving.

GPS

1. In the Settings menu, press
General > GPS and press

to select

2. To set the signal search mode, press

Full Power

3. Press /
and press

to select the desired setting

•
this to save power when GPS signal is
not available, or when GPS information
is not required (such as indoor use).
• Full Power: maximum position and
speed accuracy, consumes more
power.
• PowerSaving: Achieves longer battery
life when used in good GPS signal
condition, but less accurate.

Settings 32

ENGLISH

Language

ENGLISH

View Software Version
You can view your device current software version.
1. In the Settings menu, press

to select General > About.

2. Press
The current software version is displayed on the screen.
3. Press

to exit this menu.

Bluetooth
Before pairing Rider 530 with your bluetooth enabled mobile phone, make sure the
bluetooth function of your mobile phone and Rider 530 is turned on.

Enable Bluetooth

Enable

1. In the Settings menu, press
to select
General > Bluetooth and press
.
2. Press

3. Press

to select On and press
to exit this menu.

Settings 33

ENGLISH

Calibrate the Compass
530
the compass reading is inconsistent, please calibrate the compass manually.

Compass Cal.

1. In the Settings menu, press

to select

General>Compass Cal. and press

2. Follow the illustration shown on the
device to move the device until

Note:
magnet, materials made of iron and electronic devices. Calibrate the compass outdoors
and move away from buildings and power lines.
Note:

When the feature is enabled, the data will automatically switch pages at the preset
time.

Auto Scroll

Interval
5 sec

1. In the Settings menu, press
to select
General > Auto Scroll and press
.
2. Press
to select the setting that you
want to change and press
to enter its
submenu.
• Auto scroll: enable/disable the auto
switch.
• Interval: set the interval time.
3. Press / to adjust the desired setting
and press
4. Press

to exit this menu.

Settings

ENGLISH

Enable File Saving Mode
When the feature is enabled, the device will automatically overwrite from your oldest
records when memory storage is full.

Overwrite

1. In the Settings menu, press
to select
General > File Saving and press
.
2. Press
/

to enter its submenu and press
to adjust the desired setting and press

On
3. Press

to exit this menu.

Start Reminder
When Rider 530 detects the motion of your bike, it would pop up a reminder to ask you if
you would like to record or not. You can set the frequency of start reminder.

Start Remind

1. In the Settings menu, press
to select
General > Start Remind and press
2. Press

Once

/
3. Press

to enter its submenu and press
to adjust the desired setting and press
to exit this menu.

Settings 35

ENGLISH

View Memory Usage
View the storage status of the device.
1. In the Settings menu, press
to select
General > Memory % . The storage status

General
Auto Scroll
On

is displayed next to Memory %.

File Saving
On
Start Remind
Once

Memory%

Reset Data
You can resotre your Rider 530 to factory setting.

General
Perform
factoryOnce
reset ?

1. In the Settings menu, press
to select
General > Data Reset and press
.
2. Press

to adjust the desired setting

and press

Yes
Data Reset

NOTE: Factory reset operation will restore device to factory default settings. In addition to
deleting all the tracks, it will also delete pre-paired sensors and pre-loaded
Bryton Test but will not remove UUID from the account you added in.

Settings

Heart Rate

Speed

Cadence

Status: active

ID XXXXXXXXX

Rescan

Turn Off

Speed/CAD

ENGLISH

Sensors

Power meter

Status: active

ID XXXXXXXXX

Rescan

Turn Off

Sensors > Heart Rate Speed Cadence
Speed/CAD Power Meter

•
•

NOTE:
•

NOTE:
7

Bike Profile

Settings 37

ENGLISH

Wireless Local Area Network(WLAN)
Rider 530 supports WLAN. With the access to the internet, the device will automatically sync
data to/from Bryton App. Once the connection to a network or hotspot is successfully set up,
next time the device will automatically link to the same network or hotspot when detected.
You can also forget a network or hotspot and set up a new one.
Note: Please refer to page 9 to learn how to sync data via WLAN.

Connections
Before syncing data, please make sure you have setted up a connection to any network
or hotspot.

Connect
Bryton
My Hotspot
Sweet Home

to select Network
.

1. In Settings menu, press
>Connect and press

2. Press /
to choose one available network
or hotspot and press
.
3. Press
“

to enter password and choose

”, it means this network is successfully set up.

4. Press

to exit this menu.

Note: WLAN will be automatically activated during setting and transferring data and

Forget Network
You can view networks or hotspots which have been set up and unlink connections to networks
or hotspots.

Forget
Bryton

1. In Settings menu, press
>Forget and press
2. Press

My HOt
Do you want
to delete?

and press

to select Network
.

to choose a network or hotspot
.

3. A message “Do you want to delete?”pops up
and press
to select “Yes” and press
/

Yes
4. Press

to exit this menu.

WLAN

Appendix
ENGLISH

Rider 530
Item

Description

Display

2.6"

Physical Size

54.9 x 92.2 x 17.6 mm

Weight

79g

Operating
Temperature

-10°C ~ 50°C

Battery Charging
Temperature

0°C ~ 40°C

Battery

Li polymer rechargeable battery

Battery Life

33 hours with open sky

RF Receiver

2.4GMHz receiver with embedded antenna to support ANT+
heart rate, speed sensor, cadence sensor

GPS

Integrated high-sensitivity GPS receiver with embedded antenna

BLE Smart

Bluetooth smart wireless technology with embedded antenna

Water Resistant

IPX7 waterproof rating

Wireless Local
Area Network

IEEE 802.11 b/g/n

dot-matrix LCD

Cadence Sensor
Item

Description

Physical size

33.9 x 13.5 x 39 mm

Weight

14 g

Water Resistance

IPX7

Transmission range

Battery life

1 hour per day for 16 months

Operating temperature

-10oC ~ 60oC

Radio frequency/protocol

2.4GHz / Dynastream ANT+ Sport wireless
communications protocol

Accuracy may be degraded by poor sensor contact, electrical interference, and receiver
distance from the transmitter.
Appendix

ENGLISH

Heart Rate Monitor
Item

Description

Physical size

67~100 x 26 x 15 mm

Weight

14 g (sensor) / 35g (strap)

Water Resistance

20 m

Transmission range

Battery life

1 hour per day for 24 months

Operating temperature

5oC ~ 40oC

Radio frequency/protocol

2.4GHz / Dynastream ANT+ Sport wireless
communications protocol

Accuracy may be degraded by poor sensor contact, electrical interference, and receiver
distance from the transmitter.

Battery Information
Heart Rate Monitor and Cadence Sensor Battery

2. Use a coin to twist the cover counter-clockwise so the arrow on
the cover points to OPEN.
3. Remove the cover and battery. Wait for 30 seconds.

A
OPEN

1. Locate the circular battery cover on the back of the heart rate
monitor/cadence sensor.

CL
O

The heart rate monitor/cadence sensor contains a user-replaceable CR2032 battery.
To replace the battery:

battery chamber.

5. Use a coin to twist the cover clockwise so the arrow on the cover
points to CLOSE.

NOTE:
• When installing a new battery, if the battery is not placed with the positive connector
• Be careful not to damage or lose the O-ring gasket on the cover.
• Contact your local waste disposal department to properly dispose of used batteries.

Appendix

ENGLISH

Install Rider 530
Mount Rider 530 to the Bike

Appendix

1a Speed

1b Cadence 1c Dual Sensor

3
SP
EE

SPEED

ENGLISH

Install the Speed/Cadence/Dual Sensor
(Optional)
D

CADENCE

3.6
mm

x2
2.5
mm

Remove battery
tab before use

2.5
mm

3.6
mm

7a
Speed

SPEED

Status: active

SPEED

ID XXXXXXXXX
Rescan

SP
EE

Turn Off

Speed
SP
EE

Status: active

SP
EE

ID XXXXXXXXX
Rescan
Turn Off

7b
Cadence

CADENCE

Status: active
ID XXXXXXXXX
Rescan
Turn Off

Cadence
Status: active
ID XXXXXXXXX
Rescan
Turn Off

7c
Speed/CAD
Status: active
ID XXXXXXXXX
Rescan
Turn Off

Speed/CAD
Status: active
ID XXXXXXXXX
Rescan

Turn Off

2.5
mm

Appendix

ENGLISH

NOTE:
• To ensure optimum performance, do the following:
- Align both sensor and magnet as shown in the illustration (5a / 5b). Pay attention on the
alignment points.
- Ensure the distance between the sensor and the magnet is within 3 mm.
• Ensure that both Speed sensor and Speed magnet are installed and aligned horizontally,
not vertically.
• On the initial usage, press the front button to activate the sensor and start pedaling.
When the sensor detects the magnet, the LED blinks once to indicate the alignment is

Install Heart Rate Belt (Optional)
Strap

Electrodes

OSE
CL

OPEN

SE
CL

CL
O

OPE

OPEN

NOTE:
• In cold weather, wear appropriate clothing to keep the heart rate belt warm.
• The belt should be worn directly on your body.
• Adjust the sensor position to the middle part of the body (wear it slightly below the
chest). The Bryton logo shown on the sensor should be facing upward. Tighten the elastic
• If the sensor cannot be detected or the reading is abnormal, please warm up for about 5
minutes.
• If the heart rate belt is not used for a period of time, remove the sensor from the heart
rate belt.
Appendix

Wheel Size and Circumference
The wheel size is marked on both sides of the tires.

Wheel Size

ENGLISH

Wheel Size

Appendix

ENGLISH

Basic Care For Your Rider 530
Taking good care of your device will reduce the risk of damage to your device.
• Do not drop your device or subject it to severe shock.
• Do not expose your device to extreme temperatures and excessive moisture.
• The screen surface can easily be scratched. Use the non-adhesive generic screen
protectors to help protect the screen from minor scratches.
• Use diluted neutral detergent on a soft cloth to clean your device.
•
attempt to do so will make the warranty invalid.

NOTE: Improper battery replacement may cause an explosion. When replacing a
manufacturer. Disposal of the used batteries must be carried out in accordance to the
regulations of your local authority.

For better environmental protection, waste batteries should be collected
separately for recycling or special disposal.
Appendix

Data Fields

MHR%

Complete Data Field Name
Sunrise Time
Sunset Time
Ride Time
Average Speed
Maximum Speed
Heart Rate
Average Heart Rate
Maximum Heart Rate
Maximum Heart Rate Zone
Lactate Threshold Heart Rate Zone
Maximum Heart Rate Percentage

LTHR%
AvgCAD

Lactate Threshold Heart Rate Percentage
Average Cadence

MaxCAD

Maximum Cadence

LapAvSpd

Lap Average Speed

LapMaSpd

Lap Maximum Speed

L'stLpAvSp
LapDist

Last Lap Average Speed
Lap Distance

L'stLpDist

Last Lap Distance

L'stLapT
LapAvHR

Last Lap Time
Lap Average Heart Rate

LapMaHR

Lap Maximum Heart Rate

L'LpAvHR

Last Lap Average Heart Rate

L'A'MHR%

Lap Average MHR Percentage

L'A'LTHR%

Lap Average LTHR Percentage

LpAvSt'dR

Lap Average Stride Rate

LpStr'dAvL

Lap Stride Average Length

LLpSt'dAvL
LapAvP

Last Lap Stride Average Length
Lap Average Pace

L'stLpAvP

Last Lap Average Pace

ENGLISH

Data Fields
Sunrise
Sunset
RTime
AvgSpd
Max Spd
HR
Avg HR
Max HR
MHR Zone
LTHR Zone

Appendix

Data Fields

Complete Data Field Name
Lap Maximum Pace

LAvCAD

Lap Average Cadence

LLAvCad

Last Lap Average Cadence

ODO
Temp.

Odometer

Dist.

Temperature
Distance

T to Dest

Time to Destination

D to Dest

Distance to Destination

Max Alt.
Alt. Gain
Alt. Loss

Maximum Altitude
Altitude Gain
Altitude Loss

Grade
Str'dRate

Gradient
Stride Rate

AvStr'dRt

Average Stride Rate

MaStr'dRt

Maximum Stride Rate

AvSt'dl'gth

Average Stride Length

AvgPace

Average Pace

MaxPace

Maximum Pace

L'st1kmP

Last 1 km/mile Pace

PW now

Current Power

Avg PW

Average Power
Maximum Power

Max PW
LapMaxPW
LLapMaxPW

ENGLISH

LapMaP

Lap Maximum Power

LapAvgPW
LLapAvgPW
3s PW

Last Lap Maximum Power
Lap Average Power
Last Lap Average Power
3 Seconds Average Power

10s PW

10 Seconds Average Power

30s PW
MAP Zone
MAP%

30 Seconds Average Power
Maximum Aerobic Power Zone

FTP Zone
FTP%

Functional Threshold Power Zone
Functional Threshold Power Percentage

Maximum Aerobic Power Percentage

Appendix

Complete Data Field Name

CPB-LR

Current Left and Right Power Balance

MPB-LR

Maximum Left and Right Power Balance

APB L-R
CTE-LR

Average Left and Right Power Balance

MTE-LR
ATE-LR
CPS L-R
APS L-R
MPS-LR
IF
NP
SP

ENGLISH

Data Fields

Right
Right
Current Left and Right Pedal Smoothness
Average Left and Right Pedal Smoothness
Maximum Left and Right Pedal Smoothness
Intensity Factor
Normalized Power

TSS
Kilojoules
3s PB-LR

Training Stress Score
Power Kilojoules
3 seconds Average Left and Right Power Balance

10s PB-LR
30s PB-LR

10 seconds Average Left and Right Power Balance
30 seconds Average Left and Right Power Balance

LPB-LR
Lap NP
LLap NP

Lap Left and Right Power Balance
Lap Normalized Power
Last Lap Normalized Power

NOTE:

Appendix

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Create Date                     : 2014:05:27 15:57:45+08:00
Creator                         : Adobe InDesign CS3 (5.0)
Modify Date                     : 2016:08:29 17:08:37+08:00
Has XFA                         : No
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27
Instance ID                     : uuid:4c61e03b-890c-4415-ab17-a62f8fe1a310
Document ID                     : adobe:docid:indd:b7809359-e571-11e3-86d4-b00dc29d8bfc
Rendition Class                 : proof:pdf
Derived From Instance ID        : 5ceaf732-e151-11e3-8a50-e67529a3fe2e
Derived From Document ID        : adobe:docid:indd:5ceaf731-e151-11e3-8a50-e67529a3fe2e
Metadata Date                   : 2016:08:29 17:08:37+08:00
Creator Tool                    : Adobe InDesign CS3 (5.0)
Thumbnail Width                 : 172
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 18586 bytes, use -b option to extract)
Format                          : application/pdf
Producer                        : Adobe PDF Library 8.0
Trapped                         : False
N Pages                         : 1
Has Visible Transparency        : False
Has Visible Overprint           : True
Max Page Size W                 : 210.000274
Max Page Size H                 : 297.000132
Max Page Size Unit              : Millimeters
Font Name                       : MyriadPro-Regular, MyriadPro-Semibold, MyriadPro-Bold
Font Family                     : Myriad Pro, Myriad Pro, Myriad Pro
Font Face                       : Regular, Semibold, Bold
Font Type                       : Open Type, Open Type, Open Type
Font Version                    : Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168, Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168, Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168
Font Composite                  : False, False, False
Font File Name                  : MyriadPro-Regular.otf, MyriadPro-Semibold.otf, MyriadPro-Bold.otf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Group Name               : 預設色票群組
Swatch Group Type               : 0
Page Count                      : 48

EXIF Metadata provided by EXIF.tools

Bryton Rider 530 User's Manual EN

Rider 530 - User's Manual Rider_530_EN Free User Guide for Bryton RIDER Series GPS, Manual

Navigation menu

Versions of this User Manual:

Views

Navigation