Canon IXUS 190 User Guide UG EN
User Manual: canon IXUS 190 - User Guide Free User Guide for Canon IXUS Series Camera, Manual - page3
Open the PDF directly: View PDF 
.
Page Count: 146 [warning: Documents this large are best viewed by clicking the View PDF Link!]
1
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Camera User Guide
ENGLISH
© CANON INC. 2017 CEL-SW9BA210
• Click the buttons in the lower right to access other pages.
: Next page
: Previous page
: Page before you clicked a link
• To jump to the beginning of a chapter, click the chapter
title at right.
From chapter title pages, you can access topics by
clicking their titles.
• Make sure you read this guide, including the “Safety
Instructions” (=
6) section, before using the camera.
• Reading this guide will help you learn to use the camera
properly.
• Store this guide safely so that you can use it in the
future.
2
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Package Contents
Before use, make sure the following items are included in the package.
If anything is missing, contact your camera retailer.
Camera Battery Pack
NB-11L*
Battery Charger
CB-2LF/CB-2LFE
Printed Matter
Wrist Strap
* Do not peel o the adhesive covering from a battery pack.
• A memory card is not included (=
2).
Compatible Memory Cards
The following memory cards (sold separately) can be used, regardless of
capacity.
• SD memory cards*
• SDHC memory cards*
• SDXC memory cards*
* Cards conforming to SD standards. However, not all memory cards have been veried
to work with the camera.
Preliminary Notes and Legal
Information
• Take and review some test shots initially to make sure the images were
recorded correctly. Please note that Canon Inc., its subsidiaries and
aliates, and its distributors are not liable for any consequential damages
arising from any malfunction of a camera or accessory, including memory
cards, that result in the failure of an image to be recorded or to be
recorded in a way that is machine readable.
• The user’s unauthorized photographing or recording (video and/or sound)
of people or copyrighted materials may invade the privacy of such people
and/or may violate others’ legal rights, including copyright and other
intellectual property rights, even when such photographing or recording is
intended solely for personal use.
• For information on camera warranty or Canon Customer Support,
please refer to the warranty information provided with your camera
User Manual Kit.
• Although the screen (monitor) is produced under extremely high-precision
manufacturing conditions and more than 99.99% of the pixels meet design
specications, in rare cases some pixels may be defective or may appear
as red or black dots. This does not indicate camera damage or aect
recorded images.
• When the camera is used over an extended period, it may become warm.
This does not indicate damage.
3
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Part Names and Conventions in This Guide
Microphone
Lens
Speaker
Zoom lever
Shooting: [ (telephoto)] /
[ (wide angle)]
Playback: [ (magnify)] /
[ (index)]
Shutter button
Lamp
ON/OFF button
Flash
(N-Mark)*
Tripod socket
Memory card/battery cover
Strap mount
* Used with NFC features (=
72).
• Shooting modes and on-screen icons and text are indicated in brackets.
• : Important information you should know
• : Notes and tips for expert camera use
• =xx: Pages with related information (in this example, “xx” represents a
page number)
• The tabs shown above titles indicate whether the function is used for still
images, movies, or both.
Still Images : Indicates that the function is used when shooting or
viewing still images.
Movies : Indicates that the function is used when shooting or
viewing movies.
Screen (monitor)
AV OUT (Audio/video output) /
DIGITAL terminal
[ (Playback)] button
[ (Auto)] /
[ (Single-image erase)] /
Up button
[ (Date stamp)] / Left button
Indicator
[ (Wi-Fi)] button
Movie button
FUNC. (Function) / SET button
[ (Flash)] / Right button
[ (Information)] / Down button
[ ] button
• In this guide, icons are used to represent the corresponding camera
buttons on which they appear, or which they resemble.
• The following camera buttons and controls are represented by icons.
[] Up button on back [ ] Right button on back
[] Left button on back [ ] Down button on back
• Instructions in this guide apply to the camera under default settings.
• For convenience, all supported memory cards are simply referred to as
the “memory card”.
4
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Erasing Images ............................64
Rotating Images ........................... 66
Tagging Images as Favorites ....... 67
Editing Still Images ......................68
Wi-Fi Functions ..........................70
Available Wi-Fi Features .............. 71
Sending Images to
a Smartphone ..............................71
Saving Images to a Computer .....78
Sending Images to a Registered
Web Service ................................. 83
Printing Images Wirelessly from a
Connected Printer ........................87
Sending Images to Another
Camera ........................................89
Image Sending Options ...............90
Sending Images Automatically
(Image Sync)................................93
Using a Smartphone to View
Camera Images and Control
the Camera ..................................95
Editing or Erasing Wi-Fi
Settings ........................................97
Setting Menu ............................100
Adjusting Basic Camera
Functions ...................................101
Accessories .............................108
System Map ...............................109
Optional Accessories ................. 110
Using Optional Accessories ....... 111
Using the Software .................... 112
Printing Images .......................... 115
Appendix ..................................123
Troubleshooting .........................124
On-Screen Messages ................127
On-Screen Information ..............130
Functions and Menu Tables .......132
Handling Precautions ................. 138
Specications ............................. 138
Index ..........................................142
Table of Contents
Package Contents .........................2
Compatible Memory Cards ............2
Preliminary Notes and Legal
Information .....................................2
Part Names and Conventions
in This Guide .................................. 3
Table of Contents ........................... 4
Common Camera Operations ........5
Safety Instructions .........................6
Basic Guide ...................... 9
Initial Preparations .......................10
Trying the Camera Out ................15
Advanced Guide ............. 19
Camera Basics ...........................19
On/O ..........................................20
Shutter Button ..............................21
Shooting Display Options ............21
Using the FUNC. Menu ................ 22
Using the Menu Screen ...............23
On-Screen Keyboard ...................24
Indicator Display ..........................24
Auto Mode ..................................25
Shooting with Camera-Determined
Settings ........................................26
Common, Convenient Features ... 30
Image Customization Features ....35
Customizing Camera
Operation .....................................36
Other Shooting Modes ..............37
Specic Scenes ...........................38
Applying Special Eects ..............39
Special Modes for Other
Purposes ...................................... 42
P Mode ........................................44
Shooting in Program AE
([P] Mode) ....................................45
Image Brightness (Exposure) ......45
Adjusting White Balance ..............47
Shooting Range and Focusing ....48
Flash ............................................52
Other Settings ..............................53
Playback Mode...........................56
Viewing ........................................57
Browsing and Filtering Images ....58
Image Viewing Options ................60
Protecting Images ........................61
5
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Common Camera Operations
Shoot
Use camera-determined settings (Auto Mode) .................................... 26
Shooting people well
Portraits
(=
38)
Matching specic scenes
Low Light
(=
38)
Fireworks
(=
38)
Applying special eects
Vivid Colors
(=
39)
Poster Eect
(=
39)
Fish-Eye Eect
(=
39)
Miniature Eect
(=
40)
Toy Camera Eect
(=
41)
Monochrome
(=
41)
Focus on faces ......................................................................... 26, 38, 49
Without using the ash (Flash O) ................................................. 34, 52
Include yourself in the shot (Self-Timer) ........................................ 32, 42
Add a date stamp ................................................................................. 31
View
View images (Playback Mode) ............................................................. 57
Automatic playback (Slideshow) .......................................................... 60
On a TV ............................................................................................... 111
On a computer ....................................................................................112
Browse through images quickly ........................................................... 58
Erase images ....................................................................................... 64
Record/View Movies
Record movies ..................................................................................... 26
View movies (Playback Mode) ............................................................. 57
Print
Print pictures .......................................................................................115
Save
Save images to a computer ................................................................113
6
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Safety Instructions
• Be sure to read these instructions in order to operate the product safely.
• Follow these instructions to prevent injury or harm to the operator of the
product or others.
WARNING
Denotes the risk of serious injury or death.
• Keep the product out of the reach of young children.
A strap wrapped around a person’s neck may result in strangulation.
The accessory shoe cover is dangerous if swallowed. If swallowed, seek
immediate medical assistance.
• Use only power sources specied in this instruction manual for use
with the product.
• Do not disassemble or modify the product.
• Do not expose the product to strong shocks or vibration.
• Do not touch any exposed internal parts.
• Stop using the product in any case of unusual circumstances such
as the presence of smoke or a strange smell.
• Do not use organic solvents such as alcohol, benzine or paint
thinner to clean the product.
• Do not get the product wet. Do not insert foreign objects or liquids
into the product.
• Do not use the product where ammable gases may be present.
This may cause electric shock, explosion or re.
• For products featuring a viewnder, do not look through the
viewnder at strong light sources such as the sun on a bright day or
lasers and other strong articial light sources.
This may harm your vision.
• Observe the following instructions when using commercially
available batteries or provided battery packs.
- Use batteries/battery packs only with their specied product.
- Do not heat batteries/battery packs or expose them to re.
- Do not charge batteries/battery packs using non-authorized battery
chargers.
- Do not expose the terminals to dirt or let them come into contact
with metallic pins or other metal objects.
- Do not use leaking batteries/battery packs.
- When disposing of batteries/battery packs, insulate the terminals
with tape or other means.
This may cause electric shock, explosion or re.
If a battery/battery pack leaks and the material contacts your skin or
clothing, ush the exposed area thoroughly with running water. In case of
eye contact, ush thoroughly with copious amounts of clean running water
and seek immediate medical assistance.
7
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
• Observe the following instructions when using a battery charger.
• Observe the following instructions when using a battery charger or
AC adapter.
- Periodically remove any dust buildup from the power plug and
power outlet using a dry cloth.
- Do not plug in or unplug the product with wet hands.
- Do not use the product if the power plug is not fully inserted into
the power outlet.
- Do not expose the power plug and terminals to dirt or let them
come into contact with metallic pins or other metal objects.
- Do not touch the battery charger or AC adapter connected to a
power outlet during lightning storms.
- Do not place heavy objects on the power cord. Do not damage,
break or modify the power cord.
- Do not wrap the product in cloth or other materials when in use or
shortly after use when the product is still warm in temperature.
- Do not leave the product connected to a power source for long
periods of time.
This may cause electric shock, explosion or re.
• Do not allow the product to maintain contact with the same area of
skin for extended periods of time during use.
This may result in low-temperature contact burns, including skin redness
and blistering, even if the product does not feel hot. The use of a tripod or
similar equipment is recommended when using the product in hot places
and for people with circulation problems or less sensitive skin.
• Follow any indications to turn o the product in places where its use
is forbidden.
Not doing so may cause other equipment to malfunction due to the eect of
electromagnetic waves and even result in accidents.
CAUTION
Denotes the risk of injury.
• Do not re the ash near the eyes.
It may hurt the eyes.
• Strap is intended for use on the body only. Hanging the strap with
any product attached on a hook or other object may damage the
product. Also, do not shake the product or expose the product to
strong impacts.
• Do not apply strong pressure on the lens or allow an object to hit it.
This may cause injury or damage to the product.
• Flash emits high temperatures when red. Keep ngers, any other
part of your body, and objects away from the ash unit while taking
pictures.
This may cause burns or malfunction of the ash.
• Do not leave the product in places exposed to extremely high or low
temperatures.
The product may become extremely hot/cold and cause burns or injury
when touched.
Caution Denotes the possibility of property damage.
• Do not aim the camera at intense light sources, such as the sun on a
clear day or an intense articial light source.
Doing so may damage the image sensor or other internal components.
• When using the camera on a sandy beach or at a windy location,
be careful not to allow dust or sand to enter the camera.
• Wipe o any dust, grime, or other foreign matter on the ash with a
cotton swab or cloth.
The heat emitted from the ash may cause foreign matter to smoke or the
product to malfunction.
8
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
• Remove and store the battery pack/batteries when you are not using
the product.
Any battery leakage that occurs may cause product damage.
• Before you discard the battery pack/batteries, cover the terminals
with tape or other insulators.
Contacting other metal materials may lead to re or explosions.
• Unplug any battery charger used with the product when not in use.
Do not cover with a cloth or other objects when in use.
Leaving the unit plugged in for a long period of time may cause it to
overheat and distort, resulting in re.
• Do not leave any dedicated battery packs near pets.
Pets biting the battery pack could cause leakage, overheating, or explosion,
resulting in product damage or re.
• If your product uses multiple batteries, do not use batteries that
have dierent levels of charge together, and do not use old and
new batteries together. Do not insert the batteries with the + and –
terminals reversed.
This may cause the product to malfunction.
• Do not sit down with the camera in your pant pocket.
Doing so may cause malfunctions or damage the screen.
• When putting the camera in your bag, ensure that hard objects do
not come into contact with the screen. Also close the screen (so that
it faces the body), if your product’s screen closes.
• Do not attach any hard objects to the product.
Doing so may cause malfunctions or damage the screen.
9
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Basic Guide
Basic information and instructions, from initial preparations to shooting and playback
Initial Preparations ........................................... 10
Attaching the Strap ................................................10
Holding the Camera .............................................. 10
Charging the Battery Pack .................................... 10
Inserting the Battery Pack and Memory Card ....... 11
Setting the Date and Time ..................................... 12
Display Language .................................................14
Trying the Camera Out ..................................... 15
Shooting ................................................................ 15
Viewing ..................................................................17
10
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Initial Preparations
Prepare for shooting as follows.
Attaching the Strap
Thread the end of the strap through the
strap mount ( ), and then pull the other
end of the strap through the loop on the
threaded end ( ).
Holding the Camera
Place the strap around your wrist.
When shooting, keep your arms close to
your body and hold the camera securely
to prevent it from moving. Do not rest
your ngers on the ash.
Charging the Battery Pack
Before use, charge the battery pack with the included charger. Be sure to
charge the battery pack initially, because the camera is not sold with the
battery pack charged.
1 Insert the battery pack.
After aligning the marks on the battery
pack and charger, insert the battery pack
by pushing it in ( ) and down ( ).
2 Charge the battery pack.
CB-2LF: Flip out the plug ( ) and plug
the charger into a power outlet ( ).
CB-2LFE: Plug the power cord into the
charger, then plug the other end into a
power outlet.
The charging lamp turns orange, and
charging begins.
When charging is nished, the lamp turns
green.
3 Remove the battery pack.
After unplugging the battery charger,
remove the battery pack by pushing it in
() and up ( ).
CB-2LF
CB-2LFE
11
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
• To protect the battery pack and keep it in optimal condition, do not
charge it continuously for more than 24 hours.
• For battery chargers that use a power cord, do not attach the
charger or cord to other objects. Doing so could result in malfunction
or damage to the product.
• For details on charging time and the number of shots and recording time
possible with a fully charged battery pack, see “Power” (=
140).
• Charged battery packs gradually lose their charge, even when they are not
used. Charge the battery pack on (or immediately before) the day of use.
• The charger can be used in areas with 100 – 240 V AC power (50/60 Hz).
For power outlets in a dierent format, use a commercially available adapter
for the plug. Never use an electrical transformer designed for traveling, which
may damage the battery pack.
Inserting the Battery Pack and Memory Card
Insert the included battery pack and a memory card (sold separately).
Note that before using a memory card that is new or has been formatted
in another device, you should format the memory card with this camera
(=
104).
1 Open the cover.
Slide the cover ( ) and open it ( ).
2 Insert the battery pack.
While pressing the battery lock in the
direction of the arrow, insert the battery
pack as shown and push it in until it clicks
into the locked position.
3 Check your card’s write-protect
switch and insert the memory
card.
Recording is not possible on memory
cards with a write-protect switch when the
switch is in the locked position. Slide the
switch to the unlocked position.
Insert the memory card facing as shown
until it clicks into the locked position.
Make sure the memory card is facing the
right way when you insert it. Inserting
memory cards facing the wrong way may
damage the camera.
4 Close the cover.
Lower the cover ( ) and hold it down as
you slide it, until it clicks into the closed
position ( ).
If the cover will not close, make sure you
inserted the battery pack facing the right
way in step 2.
Terminals Battery
Lock
Label
12
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
• For guidelines on how many shots or hours of recording can be saved on one
memory card, see “Recording” (=
139).
Removing the Battery Pack and Memory Card
Remove the battery pack.
Open the cover and press the battery
lock in the direction of the arrow.
The battery pack will pop up.
Remove the memory card.
Push the memory card in until it clicks,
and then slowly release it.
The memory card will pop up.
Setting the Date and Time
Set the current date and time correctly as follows if the [Date/Time] screen
is displayed when you turn the camera on. Information you specify this way
is recorded in image properties when you shoot, and it is used when you
manage images by shooting date or print images showing the date.
You can also add a date stamp to shots, if you wish (=
31).
1 Turn the camera on.
Press the ON/OFF button.
The [Date/Time] screen is displayed.
2 Set the date and time.
Press the [ ][ ] buttons to choose an
item.
Press the [ ][ ] buttons to specify the
date and time.
When nished, press the [ ] button.
13
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
3 Specify your home time zone.
Press the [ ][ ] buttons to choose your
home time zone.
4 Finish the setup process.
Press the [ ] button to complete the
setting. The setting screen is no longer
displayed.
To turn o the camera, press the ON/OFF
button.
• Unless you set the date, time, and home time zone, the [Date/Time]
screen will be displayed each time you turn the camera on. Specify
the correct information.
• To set daylight saving time (1 hour ahead), choose [ ] in step 2 and then
choose [ ] by pressing the [ ][ ] buttons.
Changing the Date and Time
Adjust the date and time as follows.
1 Enter Playback mode.
Press the [ ] button.
2 Access the menu screen.
Press the [ ] button.
3 Choose [Date/Time].
Move the zoom lever to choose the [ ]
tab.
Press the [ ][ ] buttons to choose
[Date/Time], and then press the [ ]
button.
14
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Display Language
Change the display language as needed.
1 Enter Playback mode.
Press the [ ] button.
2 Access the setting screen.
Press and hold the [ ] button, and then
press the [ ] button.
3 Set the display language.
Press the [ ][ ][ ][ ] buttons to choose
a language, and then press the [ ]
button.
Once the display language has been set,
the setting screen is no longer displayed.
• You can also change the display language by pressing the [ ] button
and choosing [Language ] on the [ ] tab.
4 Change the date and time.
Follow step 2 in “Setting the Date and
Time” (=
12) to adjust the settings.
Press the [ ] button to close the
menu screen.
• Date/time settings can be retained for about 3 weeks by the camera’s built-in
date/time battery (backup battery) after the battery pack is removed.
• The date/time battery will be charged in about 4 hours once you insert a
charged battery pack, even if the camera is left o.
• Once the date/time battery is depleted, the [Date/Time] screen will be
displayed when you turn the camera on. Set the correct date and time as
described in “Setting the Date and Time” (=
12).
15
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Still Images Movies
Trying the Camera Out
Try out the camera by turning it on, shooting some still images or movies,
and viewing them.
Shooting
For fully automatic selection of the optimal settings for specic scenes,
simply let the camera determine the subject and shooting conditions.
Note that initially, the FUNC./SET button and some others are disabled to
prevent mistakes as you learn how to use the camera (Easy Auto).
1 Turn the camera on.
Press the ON/OFF button.
The startup screen is displayed.
2 Aim the camera at the subject.
Aim the camera at the subject.
The camera will make a slight clicking
noise as it determines the scene.
Icons representing the scene and image
stabilization mode are displayed in the
upper right of the screen.
Frames displayed around any detected
subjects indicate that they are in focus.
3 Compose the shot.
To zoom in and enlarge the subject, move
the zoom lever toward [ ] (telephoto),
and to zoom away from the subject, move
it toward [ ] (wide angle).
4 Shoot.
Shooting Still Images
Focus.
Press the shutter button lightly, halfway
down. The camera beeps twice after
focusing, and AF frames are displayed to
indicate image areas in focus.
Shoot.
Press the shutter button all the way
down.
As the camera shoots, a shutter sound
is played, and in low-light conditions,
the ash res automatically.
Keep the camera still until the shutter
sound ends.
After displaying your shot, the camera will
revert to the shooting screen.
16
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Recording Movies
Start recording.
Press the movie button. The camera
beeps once as recording begins, and
[Rec] is displayed with the elapsed
time.
Black bars are displayed on the top and
bottom edges of the screen, and the
subject is slightly enlarged. The black
bars indicate image areas not recorded.
Frames displayed around any detected
faces indicate that they are in focus.
Once recording begins, take your nger
o the movie button.
Finish recording.
Press the movie button again to stop
recording. The camera beeps twice as
recording stops.
Shooting Time
Disabling Easy Auto
Once you are nished using Easy Auto, you can try conguring common,
convenient features (=
30), as by pressing the FUNC./SET button.
Press and hold the [ ] button.
Press the [ ][ ] buttons to choose [Yes],
and then press the [ ] button.
You can return to Easy Auto mode by
pressing and holding the [ ] button
to display the setting screen and then
choosing [Yes].
17
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Viewing
After shooting images or movies, you can view them on the screen as
follows.
1 Enter Playback mode.
Press the [ ] button.
Your last shot is displayed.
2 Choose images.
To view the previous image, press the [ ]
button. To view the next image, press the
[] button.
Press and hold the [ ][ ] buttons to
browse through images quickly.
Movies are identied by a [ ] icon.
To play movies, go to step 3.
3 Play movies.
Press the [ ] button, press the [ ][ ]
buttons to choose [ ], and then press the
[] button again.
Playback now begins, and after the movie
is nished, [ ] is displayed.
To adjust the volume, press the [ ][ ]
buttons during playback.
• To switch to Shooting mode from Playback mode, press the shutter button
halfway.
18
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Erasing Images
You can choose and erase unneeded images one by one. Be careful when
erasing images, because they cannot be recovered.
1 Choose an image to erase.
Press the [ ][ ] buttons to choose an
image.
2 Erase the image.
Press the [ ] button.
After [Erase?] is displayed, press the
[][ ] buttons to choose [Erase], and
then press the [ ] button.
The current image is now erased.
To cancel erasure, press the [ ][ ]
buttons to choose [Cancel], and then
press the [ ] button.
• You can choose multiple images to erase at once (=
64).
19
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Advanced Guide
Camera Basics
Other basic operations and more ways to enjoy your camera, including shooting and playback options
On/O ................................................................ 20
Power-Saving Features (Auto Power Down) ........ 20
Shutter Button .................................................. 21
Shooting Display Options ............................... 21
Using the FUNC. Menu .................................... 22
Using the Menu Screen ................................... 23
On-Screen Keyboard ....................................... 24
Indicator Display .............................................. 24
20
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
On/Off
Shooting Mode
Press the ON/OFF button to turn the
camera on and prepare for shooting.
To turn the camera o, press the ON/OFF
button again.
Playback Mode
Press the [ ] button to turn the camera
on and view your shots.
To turn the camera o, press the [ ]
button again.
• To switch to Playback mode from Shooting mode, press the [ ] button.
• To switch to Shooting mode from Playback mode, press the shutter button
halfway (=
21).
• The lens will be retracted after about one minute once the camera is in
Playback mode. You can turn the camera o when the lens is retracted by
pressing the [ ] button.
Power-Saving Features (Auto Power Down)
As a way to conserve battery power, the camera automatically deactivates
the screen (Display O) and then turns itself o after a specic period of
inactivity.
Power Saving in Shooting Mode
The screen is automatically deactivated after about one minute of inactivity.
In about two more minutes, the lens is retracted and the camera turns itself
o. To activate the screen and prepare for shooting when the screen is o
but the lens is still out, press the shutter button halfway (=
21).
Power Saving in Playback Mode
The camera turns itself o automatically after about ve minutes of
inactivity.
• You can deactivate Auto Power Down and adjust the timing of Display O,
if you prefer (=
103).
• Power saving is not active while the camera is connected to a computer
(=
113).
21
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Shutter Button
To ensure your shots are in focus, always begin by holding the shutter
button halfway down, and once the subject is in focus, press the button all
the way down to shoot.
In this guide, shutter button operations are described as pressing the button
halfway or all the way down.
1 Press halfway. (Press lightly to
focus.)
Press the shutter button halfway. The
camera beeps twice, and frames are
displayed around image areas in focus.
2 Press all the way down. (From
the halfway position, press fully
to shoot.)
The camera shoots, as a shutter sound
is played.
Keep the camera still until the shutter
sound ends.
• Images may be out of focus if you shoot without initially pressing the
shutter button halfway.
• Length of shutter sound playback varies depending on the time
required for the shot. It may take longer in some shooting scenes,
and images will be blurry if you move the camera (or the subject
moves) before the shutter sound ends.
Shooting Display Options
Press the [ ] button to view other information on the screen, or to hide
the information. For details on the information displayed, see “On-Screen
Information” (=
130).
Information is displayed No information is
displayed
• If the display mode does not change when you press the [ ] button, hold
down the [ ] button to disable Easy Auto (=
16).
• Screen brightness is automatically increased by the night view function
when you are shooting under low light, making it easier to check how shots
are composed. However, on-screen image brightness may not match the
brightness of your shots. Note that any on-screen image distortion or jerky
subject motion will not aect recorded images.
• For playback display options, see “Switching Display Modes” (=
58).
22
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Using the FUNC. Menu
Congure commonly used functions through the FUNC. menu as follows.
Note that menu items and options vary depending on the shooting mode
(=
133 – 134) or playback mode (=
137).
1 Access the FUNC. menu.
Press the [ ] button.
2 Choose a menu item.
Press the [ ][ ] buttons to choose a
menu item, and then press the [ ] or [ ]
button.
Depending on the menu item, functions
can be specied simply by pressing the
[] or [ ] button, or another screen is
displayed for conguring the function.
3 Choose an option.
Press the [ ][ ] buttons to choose an
option.
Items labeled with a [ ] icon can
be congured by pressing the [ ]
button.
To return to the menu items, press the
[] button.
Options
Menu Items
4 Conrm your choice and exit.
Press the [ ] button.
The screen before you pressed the
[] button in step 1 is displayed again,
showing the option you congured.
• To undo any accidental setting changes, you can restore the camera’s default
settings (=
107).
23
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Using the Menu Screen
Congure a variety of camera functions through the menu screen as
follows. Menu items are grouped by purpose on tabs, such as shooting
[ ], playback [ ], and so on. Note that available menu items vary
depending on the selected shooting or playback mode (=
135 – 137).
1 Access the menu screen.
Press the [ ] button.
2 Choose a tab.
Move the zoom lever to choose a tab.
After you have pressed the [ ][ ]
buttons to choose a tab initially, you can
switch between tabs by pressing the
[][ ] buttons.
3 Choose a menu item.
Press the [ ][ ] buttons to choose an
item.
For menu items with options not shown,
rst press the [ ] or [ ] button to switch
screens, and then press the [ ][ ]
buttons to select the menu item.
To return to the previous screen, press
the [ ] button.
4 Choose an option.
Press the [ ][ ] buttons to choose an
option.
5 Conrm your choice and exit.
Press the [ ] button to return to the
screen displayed before you pressed the
[] button in step 1.
• To undo any accidental setting changes, you can restore the camera’s default
settings (=
107).
24
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Indicator Display
The indicator on the back of the camera (=
3) blinks in green at these
times.
- Connected to a computer (=
113)
- Display o (=
20, 102, 103)
- Starting up, recording, or reading
- Communicating with other devices
- Shooting long exposures (=
43)
- Connecting/transmitting via Wi-Fi
• When the indicator blinks green, do not turn the camera o, open
the memory card/battery cover, or shake or hit the camera, which
may corrupt images or damage the camera or memory card.
On-Screen Keyboard
Use the on-screen keyboard to enter information for Wi-Fi connections
(=
70). Note that the length and type of information you can enter varies
depending on the function you are using.
Entering Characters
Press the [ ][ ][ ][ ] buttons to choose
a character, and then press the [ ]
button to enter it.
Moving the Cursor
Choose [ ] or [ ] and press the [ ]
button.
Deleting Characters
Choose [ ] and press the [ ] button.
The previous character will be deleted.
Conrming Input and Returning to
the Previous Screen
Press the [ ] button.
25
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Auto Mode
Convenient mode for easy shots with greater control over shooting
Shooting with Camera-Determined
Settings ............................................................ 26
Shooting in Auto Mode .......................................... 26
Disabling Easy Auto ..............................................27
Scene Icons ..........................................................29
Image Stabilization Icons ...................................... 29
On-Screen Frames ................................................ 30
Common, Convenient Features ...................... 30
Zooming In Closer on Subjects (Digital Zoom) ..... 30
Adding a Date Stamp ............................................ 31
Using the Self-Timer.............................................. 32
Deactivating the Flash ...........................................34
Continuous Shooting ............................................. 34
Image Customization Features ....................... 35
Changing the Number of Recording Pixels
(Image Size) ..........................................................35
Changing Movie Image Quality ............................. 35
Customizing Camera Operation ..................... 36
Deactivating the Lamp .......................................... 36
Startup with Easy Auto Disabled ........................... 36
26
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
3 Compose the shot.
To zoom in and enlarge the subject, move
the zoom lever toward [ ] (telephoto),
and to zoom away from the subject, move
it toward [ ] (wide angle). (A zoom bar
showing the zoom position is displayed.)
4 Shoot.
Shooting Still Images
Focus.
Press the shutter button halfway.
The camera beeps twice after focusing,
and AF frames are displayed to indicate
image areas in focus.
Several AF frames are displayed when
multiple areas are in focus.
Zoom Bar
Shooting with Camera-Determined
Settings
For fully automatic selection of the optimal settings for specic scenes,
simply let the camera determine the subject and shooting conditions.
Note that initially, the FUNC./SET button and some others are disabled to
prevent mistakes as you learn how to use the camera (Easy Auto).
Still Images Movies
Shooting in Auto Mode
1 Turn the camera on.
Press the ON/OFF button.
The startup screen is displayed.
2 Aim the camera at the subject.
Aim the camera at the subject.
The camera will make a slight clicking
noise as it determines the scene.
Icons representing the scene and image
stabilization mode are displayed in the
upper right of the screen (=
29, 29).
Frames displayed around any detected
subjects indicate that they are in focus.
27
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Shoot.
Press the shutter button all the way
down.
As the camera shoots, a shutter sound
is played, and in low-light conditions,
the ash res automatically.
Keep the camera still until the shutter
sound ends.
After displaying your shot, the camera will
revert to the shooting screen.
Recording Movies
Start recording.
Press the movie button. The camera
beeps once as recording begins, and
[Rec] is displayed with the elapsed
time.
Black bars are displayed on the top and
bottom edges of the screen, and the
subject is slightly enlarged. The black
bars indicate image areas not recorded.
Frames displayed around any detected
faces indicate that they are in focus.
Once recording begins, take your nger
o the movie button.
Shooting Time
Resize the subject and
recompose the shot as needed.
To resize the subject, repeat the
operations in step 3 (=
26).
However, note that the sound of camera
operations will be recorded. Note that
movies shot at zoom factors shown in
blue will look grainy.
When you recompose shots, the
focus, brightness, and colors will be
automatically adjusted.
Finish recording.
Press the movie button again to stop
recording. The camera beeps twice as
recording stops.
Recording will stop automatically when
the memory card becomes full.
Disabling Easy Auto
Press and hold the [ ] button.
Press the [ ][ ] buttons to choose [Yes],
and then press the [ ] button.
28
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Still Images/Movies
• If the camera makes no operating sounds, it may have been turned
on while holding down the [ ] button. To activate sounds,
press the [ ] button, choose [Mute] on the [ ] tab, and then
press the [ ][ ] buttons to choose [O].
Still Images
• A blinking [ ] icon warns that images are more likely to be blurred
by camera shake. In this case, mount the camera on a tripod or take
other measures to keep it still.
• If your shots are dark despite the ash ring, move closer to the
subject. For details on the ash range, see “Flash” (=
139).
• The subject may be too close if the camera only beeps once when
you press the shutter button halfway. For details on the range of
focus (shooting range), see “Lens” (=
138).
• To reduce red-eye and to assist in focusing, the lamp may be lit
when shooting in low-light conditions.
• A blinking [ ] icon displayed when you attempt to shoot indicates
that shooting is not possible until the ash has nished recharging.
Shooting can resume as soon as the ash is ready, so either press
the shutter button all the way down and wait, or release it and press
it again.
• Although you can shoot again before the shooting screen is
displayed, your previous shot may determine the focus, brightness,
and colors used.
• You can change how long images are displayed after shots (=
53).
Movies
• Keep your ngers away from the
microphone while recording movies.
Blocking the microphone may prevent
audio from being recorded or may
cause the recording to sound mued.
• Avoid touching camera controls other than the movie button when
recording movies, because sounds made by the camera will be
recorded.
• Once movie recording begins, the image display area changes and
subjects are enlarged to allow for correction of signicant camera
shake. To shoot subjects at the same size shown before shooting,
adjust the image stabilization setting (=
55).
• Audio recording is monaural.
Microphone
29
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Still Images Movies
Scene Icons
In [ ] mode, shooting scenes determined by the camera are indicated
by the icon displayed, and corresponding settings are automatically
selected for optimal focusing, subject brightness, and color.
Subject
Background
People Other Subjects
Icon
Background
Color
In
Motion*1
Shadows
on Face*
1
In
Motion*1
At Close
Range
Bright
Gray
Backlit –
With Blue
Sky Light Blue
Backlit –
Sunsets –– Orange
Spotlights
Dark Blue
Dark
Tripod
Used *2–*2–
*1 Not displayed for movies.
*2 Displayed in dark scenes when the camera is held still, as when mounted on a tripod.
• Try shooting in [ ] mode (=
44) if the scene icon does not match
actual shooting conditions, or if it is not possible to shoot with your
expected eect, color, or brightness.
Still Images Movies
Image Stabilization Icons
Optimal image stabilization for the shooting conditions is automatically
applied (Intelligent IS). Additionally, the following icons are displayed in
[ ] mode.
Image stabilization for still images
(Normal)
Image stabilization for movies,
reducing strong camera shake,
as when recording while walking
(Dynamic)
Image stabilization for still images
when panning* (Panning)
Image stabilization for slow
camera shake, such as when
recording movies at telephoto
(Powered)
Image stabilization for angular
camera shake and shift-shake in
macro shots (Hybrid IS).
For movies, [ ] is displayed and
[] image stabilization is also
applied.
No image stabilization, because
the camera is mounted on a tripod
or held still by other means.
However, during movie recording,
[] is displayed, and image
stabilization to counteract wind or
other sources of vibration is used
(Tripod IS).
* Displayed when you pan, following moving subjects with the camera. When you follow
subjects moving horizontally, image stabilization only counteracts vertical camera
shake, and horizontal stabilization stops. Similarly, when you follow subjects moving
vertically, image stabilization only counteracts horizontal camera shake.
• To cancel image stabilization, set [IS Mode] to [O] (=
54). In this case,
an IS icon is not displayed.
30
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Still Images Movies
On-Screen Frames
A variety of frames are displayed once the camera detects subjects you are
aiming the camera at.
• A white frame is displayed around the subject (or person’s face)
determined by the camera to be the main subject, and gray frames are
displayed around other detected faces. Frames follow moving subjects
within a certain range to keep them in focus.
However, if the camera detects subject movement, only the white frame
will remain on the screen.
• When you are pressing the shutter button halfway and the camera
detects subject movement, a blue frame is displayed, and the focus and
image brightness are constantly adjusted (Servo AF).
• Try shooting in [ ] mode (=
44) if no frames are displayed,
if frames are not displayed around desired subjects, or if frames are
displayed on the background or similar areas.
Common, Convenient Features
Still Images Movies
Zooming In Closer on Subjects (Digital Zoom)
When distant subjects are too far away to enlarge using the optical zoom,
use digital zoom for up to about 40x enlargement.
1 Move the zoom lever toward
[].
Hold the lever until zooming stops.
Zooming stops at the largest zoom factor
before the image becomes noticeably
grainy, which is then indicated on the
screen.
2 Move the zoom lever toward
[] again.
The camera zooms in even closer on the
subject.
Zoom Factor
31
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
• Moving the zoom lever will display the zoom bar (which indicates
the zoom position). The zoom bar is color-coded to indicate the
zoom range.
- White range: optical zoom range where the image will not appear
grainy.
- Yellow range: digital zoom range where the image is not noticeably
grainy (ZoomPlus).
- Blue range: digital zoom range where the image will appear grainy.
Because the blue range will not be available at some recording pixel
settings (=
35), the maximum zoom factor can be achieved by
following step 1.
• Zoomed images may look grainy under some recording pixel
settings (=
35) and zoom factors. In this case, the zoom factor is
shown in blue.
Still Images
Adding a Date Stamp
The camera can add the shooting date to images, in the lower-right corner.
However, note that date stamps cannot be edited or removed, so conrm
beforehand that the date and time are correct (=
12).
1 Congure the setting.
Press the [ ] button to choose the
desired option.
Once the setting is complete, [ ] or [ ]
is displayed.
2 Shoot.
As you take shots, the camera adds the
shooting date or time to the lower-right
corner of images.
To restore the original setting, choose [ ]
in step 1.
• Date stamps cannot be edited or removed.
32
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
• Shots taken without adding a date stamp can be printed with one as follows.
However, adding a date stamp this way to images that already have one may
cause it to be printed twice.
- Print using printer functions (=
116)
- Use camera DPOF print settings (=
119) to print
- Use the software downloaded from the Canon website (=
112) to print
Still Images Movies
Using the Self-Timer
With the self-timer, you can include yourself in group photos or other timed
shots. The camera will shoot about 10 seconds after you press the shutter
button.
1 Congure the setting.
Press the [ ] button, choose [ ] in the
menu, and then choose [ ] (=
22).
Once the setting is complete, [ ] is
displayed.
2 Shoot.
For Still Images: Press the shutter button
halfway to focus on the subject, and then
press it all the way down.
For Movies: Press the movie button.
33
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Once you start the self-timer, the lamp
will blink and the camera will play a self-
timer sound.
Two seconds before the shot, the blinking
and sound will speed up. (The lamp will
remain lit in case the ash res.)
To cancel shooting after you have
triggered the self-timer, press the
[] button.
To restore the original setting, choose [ ]
in step 1.
Still Images Movies
Using the Self-Timer to Avoid Camera Shake
This option delays shutter release until about two seconds after you have
pressed the shutter button. If the camera is unsteady while you are pressing
the shutter button, it will not aect your shot.
Follow step 1 in “Using the Self-Timer”
(=
32) and choose [ ].
Once the setting is complete, [ ] is
displayed.
Follow step 2 in “Using the Self-Timer”
(=
32) to shoot.
Still Images Movies
Customizing the Self-Timer
You can specify the delay (0 – 30 seconds) and number of shots (1 – 10).
1 Choose [ ].
Following step 1 in “Using the Self-Timer”
(=
32), choose [ ] and press the
[] button.
2 Congure the setting.
Press the [ ][ ] buttons to choose
[Delay] or [Shots].
Press the [ ][ ] buttons to choose a
value, and then press the [ ] button.
Once the setting is complete, [ ] is
displayed.
Follow step 2 in “Using the Self-Timer”
(=
32) to shoot.
• For movies shot using the self-timer, [Delay] represents the delay
before recording begins, but the [Shots] setting has no eect.
• When you specify multiple shots, image brightness and white balance are
determined by the rst shot. More time is required between shots when the
ash res or when you have specied to take many shots. Shooting will stop
automatically when the memory card becomes full.
• When a delay longer than two seconds is specied, two seconds before the
shot, the lamp blinking and self-timer sound will speed up. (The lamp will
remain lit in case the ash res.)
34
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Still Images
Deactivating the Flash
Prepare the camera for shooting without the ash as follows.
Press the [ ] button several times until
[] is displayed.
The ash will no longer be activated.
To activate the ash, press the [ ] button
again. ([ ] is displayed.) The ash will
automatically re in low-light conditions.
• If a blinking [ ] icon is displayed when you press the shutter button
halfway in camera-shake inducing, low-light conditions, mount the
camera on a tripod or take other measures to keep it still.
Still Images
Continuous Shooting
Hold the shutter button all the way down to shoot continuously.
For details on the continuous shooting speed, see “Shooting” (=
139).
1 Congure the setting.
Press the [ ] button, choose [ ] in the
menu, and then choose [ ] (=
22).
Once the setting is complete, [ ] is
displayed.
2 Shoot.
Hold the shutter button all the way down
to shoot continuously.
• Cannot be used with the self-timer (=
32).
• Shooting may stop momentarily or continuous shooting may slow
down depending on shooting conditions, camera settings, and the
zoom position.
• As more shots are taken, shooting may slow down.
• Shooting may slow down if the ash res.
35
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Image Customization Features
Still Images
Changing the Number of Recording Pixels
(Image Size)
Choose the image’s number of recording pixels from 5 levels, as follows.
For guidelines on how many shots at each recording pixel setting can t on
a memory card, see “Recording” (=
139).
Press the [ ] button, choose [ ] in the
menu, and choose the desired option
(=
22).
The option you congured is now
displayed.
To restore the original setting, repeat this
process but choose [ ].
Guidelines for Choosing Recording Pixel Setting Based
on Paper Size
[ ]: For e-mailing images.
[ ]: For images displayed on widescreen
HDTVs or similar display devices, on a
16:9 screen.
A2 (16.5 x 23.4 in.)
A3 – A5 (11.7 x
16.5 – 5.8 x 8.3 in.)
5 x 7 in.
Postcard
3.5 x 5 in.
Movies
Changing Movie Image Quality
Two image quality settings are available. For guidelines on the total
recording time for movies at each level of image quality that will t on a
memory card, see “Recording” (=
139).
Press the [ ] button, choose [ ] in the
menu, and choose the desired option
(=
22).
The option you congured is now
displayed.
To restore the original setting, repeat this
process but choose [ ].
Image
Quality
Number of Recording
Pixels Frame Rate Details
1280 x 720 25 fps For shooting in HD.
640 x 480 30 fps For shooting in standard
denition.
• In [ ] mode, black bars displayed on the top and bottom edges of the screen
indicate image areas not recorded.
36
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Customizing Camera Operation
Customize shooting functions on the [ ] tab of the menu screen as follows.
For instructions on menu functions, see “Using the Menu Screen” (=
23).
Still Images
Deactivating the Lamp
You can deactivate the lamp that normally lights up to help you focus in low-
light conditions when you press the shutter button halfway, or that lights up
to reduce red-eye when you shoot in low-light conditions with the ash.
Press the [ ] button, choose [Lamp
Setting] on the [ ] tab, and then choose
[O] (=
23).
To restore the original setting, repeat this
process but choose [On].
Startup with Easy Auto Disabled
Easy Auto activation at startup can be disabled.
Press the [ ] button, choose [Easy
Auto start] on the [ ] tab, and then
choose [Disable] (=
23).
To restore the original setting, repeat this
process but choose [Enable].
37
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Other Shooting Modes
Shoot more eectively in various scenes, and take shots enhanced with unique image eects or captured using special
functions
Specic Scenes ................................................ 38
Applying Special Eects ................................. 39
Shooting with a Fish-Eye Lens Eect
(Fish-Eye Eect) ...................................................39
Shots Resembling Miniature Models
(Miniature Eect) ................................................... 40
Shooting with a Toy Camera Eect
(Toy Camera Eect) .............................................. 41
Shooting in Monochrome ...................................... 41
Special Modes for Other Purposes ................ 42
Auto Shooting after Detecting New Person
(Face Self-Timer) .................................................. 42
Shooting Long Exposures (Long Shutter) ............. 43
38
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Specic Scenes
Choose a mode matching the shooting scene, and the camera will
automatically congure the settings for optimal shots.
1 Choose a shooting mode.
Press the [ ] button several times until
[] is displayed.
Press the [ ] button, choose [ ] in the
menu, and choose the desired option
(=
22).
2 Shoot.
Still Images Movies
Shooting Portraits (Portrait)
Take shots of people with a softening
eect.
Still Images
Shooting under Low Light
(Low Light)
Shoot with minimal camera and subject
shake even in low-light conditions.
Still Images Movies
Shooting Fireworks (Fireworks)
Vivid shots of reworks.
• In [ ] mode, mount the camera on a tripod or take other measures
to keep it still and prevent camera shake.
• Set [IS Mode] to [O] when using a tripod or other means to secure
the camera (=
54).
• If the shooting mode does not change when you press the [ ] button,
hold down the [ ] button to disable Easy Auto (=
27).
• [] mode recording pixel setting is [ ] (2560 x 1920) and cannot be
changed.
• In [ ] mode, although no frames are displayed when you press the shutter
button halfway, optimal focus is still determined.
39
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Applying Special Effects
Add a variety of eects to images when shooting.
1 Choose a shooting mode.
Follow step 1 in “Specic Scenes”
(=
38) to choose a shooting mode.
2 Shoot.
Still Images Movies
Shooting in Vivid Colors
(Super Vivid)
Shots in rich, vivid colors.
Still Images Movies
Posterized Shots (Poster Eect)
Shots that resemble an old poster or
illustration.
• In [ ] and [ ] modes, try taking some test shots rst, to make sure
you obtain the desired results.
Still Images
Shooting with a Fish-Eye Lens Effect
(Fish-Eye Effect)
Shoot with the distorting eect of a sh-eye lens.
1 Choose [ ].
Follow step 1 in “Specic Scenes”
(=
38) and choose [ ].
2 Choose an eect level.
Press the [ ] button, press the [ ][ ]
buttons to choose an eect level, and
then press the [ ] button.
A preview is shown of how your shot will
look with the eect applied.
3 Shoot.
• Try taking some test shots rst, to make sure you obtain the desired
results.
40
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Still Images Movies
Shots Resembling Miniature Models
(Miniature Effect)
Creates the eect of a miniature model, by blurring image areas above and
below your selected area.
You can also make movies that look like scenes in miniature models by
choosing the playback speed before the movie is recorded. People and
objects in the scene will move quickly during playback. Note that sound is
not recorded.
1 Choose [ ].
Follow step 1 in “Specic Scenes”
(=
38) and choose [ ].
A white frame is displayed, indicating the
image area that will not be blurred.
2 Choose the area to keep in
focus.
Press the [ ] button.
Move the zoom lever to resize the frame,
and press the [ ][ ] buttons to move it.
3 For movies, choose the movie
playback speed.
Press the [ ] button, and then press
the [ ][ ] buttons to choose the speed.
4 Return to the shooting screen
and shoot.
Press the [ ] button to return to the
shooting screen, and then shoot.
Playback Speed and Estimated Playback Time
(for One-Minute Clips)
Speed Playback Time
Approx. 12 sec.
Approx. 6 sec.
Approx. 3 sec.
• The zoom is not available when shooting movies. Be sure to set the
zoom before shooting.
• Try taking some test shots rst, to make sure you obtain the desired
results.
• To switch the orientation of the frame to vertical, press the [ ][ ] buttons in
step 2. To return the frame to horizontal orientation, press the [ ][ ] buttons.
• To move the frame when it is in horizontal orientation, press the [ ][ ]
buttons, and to move the frame when it is in vertical orientation, press the
[][ ] buttons.
• Holding the camera vertically will change the orientation of the frame.
• Movie image quality is [ ] when a still image recording pixel setting of [ ] is
selected and [ ] when a still image recording pixel setting of [ ] is selected
(=
35). These quality settings cannot be changed.
41
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Still Images
Shooting with a Toy Camera Effect
(Toy Camera Effect)
This eect makes images resemble shots from a toy camera by vignetting
(darker, blurred image corners) and changing the overall color.
1 Choose [ ].
Follow step 1 in “Specic Scenes”
(=
38) and choose [ ].
2 Choose a color tone.
Press the [ ] button, press the [ ][ ]
buttons to choose a color tone, and then
press the [ ] button.
A preview is shown of how your shot will
look with the eect applied.
3 Shoot.
Standard Shots resemble toy camera images.
Warm Images have a warmer tone than with [Standard].
Cool Images have a cooler tone than with [Standard].
• Try taking some test shots rst, to make sure you obtain the desired
results.
Still Images Movies
Shooting in Monochrome
Shoot images in black and white, sepia, or blue and white.
1 Choose [ ].
Follow step 1 in “Specic Scenes”
(=
38) and choose [ ].
2 Choose a color tone.
Press the [ ] button, press the [ ][ ]
buttons to choose a color tone, and then
press the [ ] button.
A preview is shown of how your shot will
look with the eect applied.
3 Shoot.
B/W Black and white shots.
Sepia Sepia tone shots.
Blue Blue and white shots.
42
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Special Modes for Other Purposes
Still Images
Auto Shooting after Detecting New Person
(Face Self-Timer)
The camera will shoot about two seconds after detecting that the face of
another person (such as the photographer) has entered the shooting area
(=
49). This is useful when including yourself in group photos or similar
shots.
1 Choose [ ].
Follow step 1 in “Specic Scenes”
(=
38) and choose [ ].
2 Compose the shot and press
the shutter button halfway.
Make sure a green frame is displayed
around the face you focus on and white
frames around other faces.
3 Press the shutter button all the
way down.
The camera now enters shooting standby
mode, and [Look straight at camera to
start count down] is displayed.
The lamp blinks and the self-timer sound
is played.
4 Join the subjects in the
shooting area and look at the
camera.
After the camera detects a new face, the
lamp blinking and self-timer sound will
speed up. (When the ash res, the lamp
will remain lit.) About two seconds later,
the camera will shoot.
To cancel shooting after you have
triggered the self-timer, press the
[] button.
• Even if your face is not detected after you join the others in the shooting area,
the camera will shoot about 15 seconds later.
• To change the number of shots, press the [ ] button, press the [ ][ ] buttons
to choose the number of shots, and then press the [ ] button.
43
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Still Images
Shooting Long Exposures (Long Shutter)
Specify a shutter speed of 1 – 15 seconds to shoot long exposures. In this
case, mount the camera on a tripod or take other measures to prevent
camera shake.
1 Choose [ ].
Follow step 1 in “Specic Scenes”
(=
38) and choose [ ].
2 Choose the shutter speed.
Press the [ ] button, choose [ ] in the
menu, and choose the desired shutter
speed (=
22).
3 Check the exposure.
Press the shutter button halfway to view
the exposure for your selected shutter
speed.
4 Shoot.
• On-screen image brightness in step 3, when you pressed the
shutter button halfway, may not match the brightness of your shots.
• With shutter speeds of 1.3 seconds or slower, there will be a delay
before you can shoot again, as the camera processes images to
reduce noise.
• Set [IS Mode] to [O] when using a tripod or other means to secure
the camera (=
54).
• If the ash res, your shot may be overexposed. In this case, set the ash to
[] and shoot again (=
52).
44
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
P Mode
More discerning shots, in your preferred shooting style
• Instructions in this chapter apply to the camera when set to [ ] mode.
• []: Program AE; AE: Auto Exposure
• Before using a function introduced in this chapter in modes other than [ ], make sure the function is available in that mode (=
132 – 136).
Shooting in Program AE ([P] Mode) ............... 45
Image Brightness (Exposure) ......................... 45
Adjusting Image Brightness
(Exposure Compensation) .................................... 45
Changing the Metering Method ............................. 46
Changing the ISO Speed ...................................... 46
Correcting Image Brightness (i-Contrast) .............. 47
Adjusting White Balance ................................. 47
Shooting Range and Focusing ....................... 48
Shooting Close-Ups (Macro) ................................. 48
Shooting Distant Subjects (Innity) ....................... 49
Changing the AF Frame Mode .............................. 49
Changing the Focus Setting .................................. 51
Flash .................................................................. 52
Changing the Flash Mode ..................................... 52
Other Settings .................................................. 53
Displaying Grid Lines ............................................ 53
Deactivating the Digital Zoom ............................... 53
Changing the Image Display Style after Shots ...... 53
Changing the IS Mode Settings ............................ 54
45
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Still Images Movies
Shooting in Program AE ([P] Mode)
You can customize many function settings to suit your preferred shooting
style.
1 Enter [ ] mode.
Follow step 1 in “Specic Scenes”
(=
38) and choose [ ].
2 Customize the settings as
desired (=
45 – 55), and
then shoot.
• If the optimum exposure cannot be obtained when you press the shutter button
halfway, the shutter speed and aperture value are displayed in orange. In this
case, try adjusting the ISO speed (=
46) or activating the ash (if subjects
are dark, =
52), which may enable optimum exposure.
• Movies can be recorded in [ ] mode as well, by pressing the movie button.
However, some FUNC. (=
22) and MENU (=
23) settings may be
automatically adjusted for movie recording.
• For details on the shooting range in [ ] mode, see “Lens” (=
138).
Image Brightness (Exposure)
Still Images Movies
Adjusting Image Brightness (Exposure
Compensation)
The standard exposure set by the camera can be adjusted in 1/3-stop
increments, in a range of –2 to +2.
Press the [ ] button and choose [ ]
in the menu. As you watch the screen,
press the [ ][ ] buttons to adjust
brightness (=
22).
When shooting movies, shoot with the
exposure compensation bar displayed.
When shooting still images, press the
[] button to display the set exposure
compensation amount, and then shoot.
• You can also shoot still images with exposure compensation bar displayed.
• While recording a movie, [ ] is displayed, and the exposure is locked.
46
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Still Images
Changing the Metering Method
Adjust the metering method (how brightness is measured) to suit shooting
conditions as follows.
Press the [ ] button, choose [ ] in the
menu, and choose the desired option
(=
22).
The option you congured is now
displayed.
Evaluative For typical shooting conditions, including backlit shots.
Automatically adjusts exposure to match the shooting conditions.
Center
Weighted Avg.
Determines the average brightness of light across the entire
image area, calculated by treating brightness in the central area
as more important.
Spot Metering restricted to within the [ ] (Spot AE Point frame),
displayed in the center of the screen.
Still Images
Changing the ISO Speed
Set the ISO speed to [AUTO] for automatic adjustment to suit the shooting
mode and conditions. Otherwise, set a higher ISO speed for higher
sensitivity, or a lower value for lower sensitivity.
Press the [ ] button, choose [ ] in the
menu, and choose the desired option
(=
22).
The option you congured is now
displayed.
• To view the automatically determined ISO speed when you have set the ISO
speed to [AUTO], press the shutter button halfway.
• Although choosing a lower ISO speed may reduce image graininess,
there may be a greater risk of subject and camera shake in some shooting
conditions.
• Choosing a higher ISO speed will increase shutter speed, which may reduce
subject and camera shake and increase the ash range. However, shots may
look grainy.
47
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Still Images
Correcting Image Brightness (i-Contrast)
Before shooting, excessively bright or dark image areas (such as faces or
backgrounds) can be detected and automatically adjusted to the optimal
brightness. Insucient overall image contrast can also be automatically
corrected before shooting to make subjects stand out better.
Press the [ ] button, choose
[i-Contrast] on the [ ] tab, and then
choose [Auto] (=
23).
Once the setting is complete, [ ] is
displayed.
• Under some shooting conditions, correction may be inaccurate or
may cause images to appear grainy.
• You can also correct existing images (=
68).
Still Images Movies
Adjusting White Balance
By adjusting white balance (WB), you can make image colors look more
natural for the scene you are shooting.
Press the [ ] button, choose [ ] in the
menu, and choose the desired option
(=
22).
The option you congured is now
displayed.
Auto Automatically sets the optimal white balance for the shooting
conditions.
Day Light For shooting outdoors in fair weather.
Cloudy For shooting in cloudy conditions, in the shade, or at twilight.
Tungsten For shooting under ordinary incandescent (tungsten) lighting
and similarly colored uorescent lighting.
Fluorescent For shooting under warm-white (or similarly colored) or cool-
white uorescent lighting.
Fluorescent H For shooting under daylight uorescent and similarly colored
uorescent lighting.
Custom For manually setting a custom white balance (=
48).
48
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Still Images Movies
Custom White Balance
For image colors that look natural under the light in your shot, adjust white
balance to suit the light source where you are shooting. Set the white
balance under the same light source that will illuminate your shot.
Follow the steps in “Adjusting White
Balance” (=
47) to choose [ ].
Aim the camera at a plain white subject,
so that the entire screen is white.
Press the [ ] button.
The tint of the screen changes once the
white balance data has been recorded.
• Colors may look unnatural if you change camera settings after
recording white balance data.
Shooting Range and Focusing
Still Images
Shooting Close-Ups (Macro)
To restrict the focus to subjects at close range, set the camera to [ ].
For details on the range of focus, see “Lens” (=
138).
Press the [ ] button, choose [ ] in the
menu, and then choose [ ] (=
22).
Once the setting is complete, [ ] is
displayed.
• If the ash res, vignetting may occur.
• In the yellow bar display area below the zoom bar, [ ] will turn gray
and the camera will not focus.
• To prevent camera shake, try mounting the camera on a tripod and shooting
with the camera set to [ ] (=
33).
49
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Still Images
Shooting Distant Subjects (Innity)
To restrict the focus to distant subjects, set the camera to [ ]. For details
on the range of focus, see “Lens” (=
138).
Press the [ ] button, choose [ ] in the
menu, and then choose [ ] (=
22).
Once the setting is complete, [ ] is
displayed.
Still Images Movies
Changing the AF Frame Mode
Change the AF (auto focus) frame mode to suit the shooting conditions as
follows.
Press the [ ] button, choose
[AF Frame] on the [ ] tab, and then
choose the desired option (=
23).
Still Images Movies
Face AiAF
• Detects people’s faces, and then sets the focus, exposure (evaluative
metering only), and white balance ([ ] only).
• After you aim the camera at the subject, a white frame is displayed
around the person’s face determined by the camera to be the main
subject, and up to two gray frames are displayed around other detected
faces.
• When the camera detects movement, frames will follow moving subjects,
within a certain range.
• After you press the shutter button halfway, up to nine green frames are
displayed around faces in focus.
• If faces are not detected, or when only gray frames are displayed
(without a white frame), up to nine green frames are displayed in the
areas in focus when you press the shutter button halfway.
• If faces are not detected when Servo AF (=
50) is set to [Enable],
the AF frame is displayed in the center of the screen when you
press the shutter button halfway.
• Examples of faces that cannot be detected:
- Subjects that are distant or extremely close
- Subjects that are dark or light
- Faces in prole, at an angle, or partly hidden
• The camera may misinterpret non-human subjects as faces.
• No AF frames are displayed if the camera cannot focus when you
press the shutter button halfway.
50
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Still Images
Choosing Subjects to Focus On (Tracking AF)
Shoot after choosing a subject to focus on as follows.
1 Choose [Tracking AF].
Follow the steps in “Changing the AF
Frame Mode” (=
49) to choose
[Tracking AF].
[ ] is displayed in the center of the
screen.
2 Choose a subject to focus on.
Aim the camera so that [ ] is on the
desired subject.
Press the shutter button halfway. [ ]
changes to a blue [ ], which follows
the subject as the camera continues to
adjust the focus and exposure (Servo AF)
(=
50).
3 Shoot.
Press the shutter button all the way down
to shoot.
• [Servo AF] (=
50) is set to [Enable] and cannot be changed.
• Tracking may not be possible when subjects are too small or move
too rapidly, or when subject color or brightness matches that of the
background too closely.
• [ ] and [ ] are not available.
Still Images Movies
Center
One AF frame is displayed in the center. Eective for reliable focusing.
• A yellow AF frame is displayed with [ ] if the camera cannot focus
when you press the shutter button halfway.
• To compose shots so that subjects are positioned at the edge or in a corner,
rst aim the camera to capture the subject in an AF frame, and then hold
the shutter button halfway down. As you continue to hold the shutter button
halfway, recompose the shot as desired, and then press the shutter button all
the way down (Focus Lock).
Still Images
Shooting with Servo AF
This mode helps avoid missing shots of subjects in motion, because the
camera continues to focus on the subject and adjust the exposure as long
as you press the shutter button halfway.
1 Congure the setting.
Press the [ ] button, choose
[Servo AF] on the [ ] tab, and then
choose [Enable] (=
23).
2 Focus.
The focus and exposure are maintained
where the blue AF frame is displayed
while you are pressing the shutter button
halfway.
51
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
• Focusing may not be possible in some shooting conditions.
• In low-light conditions, Servo AF may not be activated (AF frames
may not turn blue) when you press the shutter button halfway. In this
case, the focus and exposure are set according to the specied AF
frame mode.
• If optimum exposure cannot be obtained, the shutter speed and
aperture value are displayed in orange. Release the shutter button,
and then press it halfway again.
• Not available when using the self-timer (=
32).
Still Images
Changing the Focus Setting
You can change default camera operation of constantly focusing on
subjects it is aimed at, even when the shutter button is not pressed.
Instead, you can limit camera focusing to the moment you press the shutter
button halfway.
Press the [ ] button, choose
[Continuous AF] on the [ ] tab, and then
choose [Disable] (=
23).
Enable Helps avoid missing sudden photo opportunities, because the camera
constantly focuses on subjects until you press the shutter button halfway.
Disable
Conserves battery power, because the camera does not focus constantly.
52
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Flash
Still Images
Changing the Flash Mode
You can change the ash mode to match the shooting scene. For details on
the ash range, see “Flash” (=
139).
Press the [ ] button, press the [ ][ ]
buttons to choose a ash mode, and then
press the [ ] button.
The option you congured is now
displayed.
[] Auto
Fires automatically in low-light conditions.
[ ] On
Fires for each shot.
[ ] Slow Synchro
Fires to illuminate the main subject (such as people) while shooting at a
slower shutter speed to illuminate backgrounds out of ash range.
• In [ ] mode, mount the camera on a tripod or take other measures
to keep it still and prevent camera shake.
• In [ ] mode, even after the ash res, ensure that the main subject
does not move until the shutter sound is nished playing.
• Set [IS Mode] to [O] when using a tripod or other means to secure
the camera (=
54).
[] O
For shooting without the ash.
• If a blinking [ ] icon is displayed when you press the shutter button
halfway in camera-shake inducing, low-light conditions, mount the
camera on a tripod or take other measures to keep it still.
53
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Other Settings
Still Images Movies
Displaying Grid Lines
Grid lines can be displayed on the screen for vertical and horizontal
reference while shooting.
Press the [ ] button, choose
[Grid Lines] on the [ ] tab, and then
choose [On] (=
23).
Once the setting is complete, grid lines
are displayed on the screen.
• Grid lines are not recorded in your shots.
Still Images Movies
Deactivating the Digital Zoom
If you prefer not to use the digital zoom (=
30), you can deactivate it as
follows.
Press the [ ] button, choose
[Digital Zoom] on the [ ] tab, and then
choose [O] (=
23).
Still Images
Changing the Image Display Style after Shots
You can change how long images are displayed and what information is
displayed immediately after shooting.
Changing the Image Display Period after Shots
1 Access the [Review image after
shooting] screen.
Press the [ ] button, choose
[Review image after shooting] on the
[] tab, and then press the [ ] button
(=
23).
2 Congure the setting.
Choose [Display Time], and then choose
the desired option (=
23).
Quick Displays images only until you can shoot again.
2 sec., 4 sec.,
8 sec.
Displays images for the specied time. Even while the shot is displayed,
you can take another shot by pressing the shutter button halfway again.
Hold Displays images until you press the shutter button halfway.
O No image display after shots.
54
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Changing the Screen Displayed after Shots
Change the way images are displayed after shots as follows.
1 Set [Display Time] to [2 sec.],
[4 sec.], [8 sec.], or [Hold]
(=
53).
2 Congure the setting.
Choose [Display Info], and then choose
the desired option (=
23).
O Displays only the image.
Detailed Displays shooting details (=
131).
• When [Display Time] (=
53) is set to [O] or [Quick], [Display Info] is set to
[O] and cannot be changed.
• By pressing the [ ] button while an image is displayed after shooting, you can
switch the display information. Note that the settings of [Display Info] are not
changed. You can also erase images by pressing the [ ] button, or protect
images (=
61) by pressing the [ ] button.
Still Images Movies
Changing the IS Mode Settings
1 Access the setting screen.
Press the [ ] button, choose
[IS Settings] on the [ ] tab, and then
press the [ ] button (=
23).
2 Congure the setting.
Choose [IS Mode], and then choose the
desired option (=
23).
Continuous Optimal image stabilization for the shooting conditions is automatically
applied (Intelligent IS) (=
29).
Shoot Only* Image stabilization is active only at the moment of shooting.
O Deactivates image stabilization.
* The setting is changed to [Continuous] for movie recording.
• If image stabilization cannot prevent camera shake, mount the
camera on a tripod or take other measures to hold it still. In this
case, set [IS Mode] to [O].
55
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Movies
Recording Movies with Subjects at the Same Size Shown
before Shooting
Normally, once movie recording begins, the image display area changes
and subjects are enlarged to allow for correction of signicant camera
shake. To shoot subjects at the same size shown before shooting, you can
choose not to reduce signicant camera shake.
Follow the steps in “Changing the IS
Mode Settings” (=
54) to access the
[IS Settings] screen.
Choose [Dynamic IS], and then choose
[2] (=
23).
• When the movie quality is [ ] (=
35), Dynamic IS is [1] and
cannot be changed.
• You can also set [IS Mode] to [O], so that subjects are recorded at the same
size shown before shooting.
56
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Playback Mode
Have fun reviewing your shots, and browse or edit them in many ways
• To prepare the camera for these operations, press the [ ] button to enter Playback mode.
• It may not be possible to play back or edit images that were renamed or already edited on a computer, or images from other cameras.
Viewing .............................................................. 57
Switching Display Modes ...................................... 58
Browsing and Filtering Images ....................... 58
Navigating through Images in an Index................. 58
Finding Images Matching Specied Conditions .... 59
Image Viewing Options .................................... 60
Magnifying Images ................................................ 60
Viewing Slideshows ..............................................60
Protecting Images ............................................ 61
Using the Menu ..................................................... 62
Choosing Images Individually ............................... 62
Selecting a Range .................................................62
Protecting All Images at Once ............................... 63
Erasing Images ................................................. 64
Erasing Multiple Images at Once .......................... 64
Rotating Images ............................................... 66
Using the Menu ..................................................... 66
Deactivating Auto Rotation ....................................66
Tagging Images as Favorites .......................... 67
Using the Menu ..................................................... 67
Editing Still Images .......................................... 68
Resizing Images .................................................... 68
Correcting Image Brightness (i-Contrast) .............. 68
Correcting Red-Eye ............................................... 69
57
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Still Images Movies
Viewing
After shooting images or movies, you can view them on the screen as
follows.
1 Enter Playback mode.
Press the [ ] button.
Your last shot is displayed.
2 Choose images.
To view the previous image, press the [ ]
button. To view the next image, press the
[] button.
Press and hold the [ ][ ] buttons to
browse through images quickly.
Movies are identied by a [ ] icon.
To play movies, go to step 3.
3 Play movies.
To start playback, press the [ ] button,
press the [ ][ ] buttons to choose [ ],
and then press the [ ] button again.
4 Adjust the volume.
Press the [ ][ ] buttons to adjust the
volume.
To adjust the volume when the volume
indicator is no longer displayed, press the
[][ ] buttons.
5 Pause playback.
To pause or resume playback, press the
[] button.
After the movie is nished, [ ] is
displayed.
• To switch to Shooting mode from Playback mode, press the shutter button
halfway.
• To have the most recent shot displayed when you enter Playback mode,
choose MENU (=
23) > [ ] tab > [Resume] > [Last shot].
• To change the transition shown between images, access MENU (=
23) and
choose your desired eect on the [ ] tab > [Transition].
Volume Indicator
58
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Still Images Movies
Switching Display Modes
Press the [ ] button to view other information on the screen, or to hide
the information. For details on the information displayed, see “Playback
(Detailed Information Display)” (=
131).
No Information
Display
Simple
Information
Display
Detailed
Information
Display
Still Images Movies
Overexposure Warning (for Image Highlights)
Washed-out highlights in the image ash on the screen in detailed
information display (=
58).
Still Images Movies
Histogram
The graph in detailed information display
(=
58) is a histogram showing the
distribution of brightness in the image.
The horizontal axis represents the degree
of brightness, and the vertical axis, how
much of the image is at each level of
brightness. Viewing the histogram is a
way to check exposure.
High
Dark
Low
Bright
Browsing and Filtering Images
Still Images Movies
Navigating through Images in an Index
By displaying multiple images in an index, you can quickly nd the images
you are looking for.
1 Display images in an index.
Move the zoom lever toward [ ] to
display images in an index. Moving the
lever again will increase the number of
images shown.
To display fewer images, move the zoom
lever toward [ ]. Fewer images are
shown each time you move the lever.
2 Choose an image.
Press the [ ][ ][ ][ ] buttons to choose
an image.
An orange frame is displayed around the
selected image.
Press the [ ] button to view the selected
image in single-image display.
59
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Still Images Movies
Finding Images Matching Specied
Conditions
Find desired images quickly on a memory card full of images by ltering
image display according to your specied conditions. You can also protect
(=
61) or delete (=
64) these images all at once.
Shot Date Displays the images shot on a specic date.
Favorites Displays images tagged as favorites (=
67).
Still image/Movie Displays only still images or movies.
1 Choose the rst condition for
image display or navigation.
Press the [ ] button, choose [ ] in the
menu, and choose a condition (=
22).
2 Choose the second condition
for image display or navigation.
Press the [ ][ ][ ][ ] buttons to choose
a condition, and then press the [ ]
button.
3 View the ltered images.
Images matching your conditions are
displayed in yellow frames. To view only
these images, press the [ ][ ] buttons.
To cancel ltered display, choose [ ] in
step 1.
• When the camera has found no corresponding images for some
conditions, those conditions will not be available.
• To show or hide information, press the [ ] button in step 3.
• Options for viewing the images found (in step 3) include “Navigating through
Images in an Index” (=
58), “Magnifying Images” (=
60), and “Viewing
Slideshows” (=
60). You can protect, erase, or print all images found or add
them to a photobook by choosing [Select All Images in Search] in “Protecting
Images” (=
61), “Erasing Multiple Images at Once” (=
64), “Adding
Images to the Print List (DPOF)” (=
119), or “Adding Images to a Photobook”
(=
121).
• If you edit images and save them as new images (=
68 – 69), a message
is displayed, and the images that were found are no longer shown.
60
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Still Images Movies
Viewing Slideshows
Automatically play back images from a memory card as follows. Each image
is displayed for about three seconds.
Press the [ ] button, choose [ ] in the
menu, and choose the desired option
(=
22).
The slideshow will start after [Loading
image] is displayed for a few seconds.
Press the [ ] button to stop the
slideshow.
• The camera’s power-saving functions (=
20) are deactivated
during slideshows.
• To pause or resume slideshows, press the [ ] button.
• You can switch to other images during playback by pressing the [ ][ ]
buttons. For fast-forward or fast-rewind, hold the [ ][ ] buttons down.
• In ltered display (=
59), only images matching search conditions are
played.
Image Viewing Options
Still Images
Magnifying Images
1 Magnify an image.
Moving the zoom lever toward [ ] will
zoom in and magnify the image. You
can magnify images up to about 10x by
continuing to hold the zoom lever.
To zoom out, move the zoom lever
toward [ ]. You can return to single-
image display by continuing to hold it.
2 Move the display position and
switch images as needed.
To move the display position, press the
[][ ][ ][ ] buttons.
While [ ] is displayed, you can
switch to [ ] by pressing the [ ]
button. To switch to other images while
zoomed, press the [ ][ ] buttons.
Press the [ ] button again to restore the
original setting.
• You can return to single-image display from magnied display by pressing the
[] button.
Approximate Position of
Displayed Area
61
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Changing Slideshow Settings
You can set up slideshows to repeat, and you can change the transitions
between images and the display duration of each image.
1 Access the setting screen.
Press the [ ] button, and then
choose [Slideshow] on the [ ] tab
(=
23).
2 Congure the settings.
Choose a menu item to congure, and
then choose the desired option (=
23).
To start the slideshow with your settings,
choose [Start] and press the [ ] button.
To return to the menu screen, press the
[] button.
Still Images Movies
Protecting Images
Protect important images to prevent accidental erasure (=
64).
Press the [ ] button, and then choose
[] in the menu (=
22). [Protected]
is displayed.
To cancel protection, repeat this process
and choose [ ] again, and then press
the [ ] button.
• Protected images on a memory card will be erased if you format the
card (=
104).
• Protected images cannot be erased using the camera’s erasure function.
To erase them this way, rst cancel protection.
62
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Using the Menu
1 Access the setting screen.
Press the [ ] button and choose
[Protect] on the [ ] tab (=
23).
2 Choose a selection method.
Choose a menu item and an option as
desired (=
23).
To return to the menu screen, press the
[] button.
Choosing Images Individually
1 Choose [Select].
Following step 2 in “Using the Menu”
(=
62), choose [Select] and press the
[] button.
2 Choose an image.
Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
[] is displayed.
To cancel selection, press the [ ] button
again. [ ] is no longer displayed.
Repeat this process to specify other
images.
3 Protect the image.
Press the [ ] button. A conrmation
message is displayed.
Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
• Images will not be protected if you switch to Shooting mode or turn
the camera o before nishing the setup process in step 3.
Selecting a Range
1 Choose [Select Range].
Following step 2 in “Using the Menu”
(=
62), choose [Select Range] and
press the [ ] button.
2 Choose a starting image.
Press the [ ] button.
Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
63
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
3 Choose an ending image.
Press the [ ] button to choose [Last
image], and then press the [ ] button.
Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
Images before the rst image cannot be
selected as the last image.
4 Protect the images.
Press the [ ] button to choose [Protect],
and then press the [ ] button.
• To cancel protection for groups of images, choose [Unlock] in step 4.
Protecting All Images at Once
1 Choose [Protect All Images].
Following step 2 in “Using the Menu”
(=
62), choose [Protect All Images]
and press the [ ] button.
2 Protect the images.
Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
• To cancel protection for groups of images, choose [Unprotect All Images] in
step 1.
64
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Still Images Movies
Erasing Images
You can choose and erase unneeded images one by one. Be careful when
erasing images, because they cannot be recovered. However, protected
images (=
61) cannot be erased.
1 Choose an image to erase.
Press the [ ][ ] buttons to choose an
image.
2 Erase the image.
Press the [ ] button.
After [Erase?] is displayed, press the
[][ ] buttons to choose [Erase], and
then press the [ ] button.
The current image is now erased.
To cancel erasure, press the [ ][ ]
buttons to choose [Cancel], and then
press the [ ] button.
Erasing Multiple Images at Once
You can choose multiple images to erase at once. Be careful when erasing
images, because they cannot be recovered. However, protected images
(=
61) cannot be erased.
Choosing a Selection Method
1 Access the setting screen.
Press the [ ] button, and then
choose [Erase] on the [ ] tab (=
23).
2 Choose a selection method.
Press the [ ][ ] buttons to choose a
selection method, and then press the [ ]
button.
To return to the menu screen, press the
[] button.
65
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Choosing Images Individually
1 Choose [Select].
Following step 2 in “Choosing a Selection
Method” (=
64), choose [Select] and
press the [ ] button.
2 Choose an image.
Once you choose an image following
step 2 in “Choosing Images Individually”
(=
62), [ ] is displayed.
To cancel selection, press the [ ] button
again. [ ] is no longer displayed.
Repeat this process to specify other
images.
3 Erase the images.
Press the [ ] button. A conrmation
message is displayed.
Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
Selecting a Range 1 Choose [Select Range].
Following step 2 in “Choosing a Selection
Method” (=
64), choose [Select
Range] and press the [ ] button.
2 Choose images.
Follow steps 2 – 3 in “Selecting a Range”
(=
62) to specify images.
3 Erase the images.
Press the [ ] button to choose [Erase],
and then press the [ ] button.
Specifying All Images at Once
1 Choose [Select All Images].
Following step 2 in “Choosing a Selection
Method” (=
64), choose [Select All
Images] and press the [ ] button.
2 Erase the images.
Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
66
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Still Images
Rotating Images
Change the orientation of images and save them as follows.
1 Choose [ ].
Press the [ ] button, and then choose
[] in the menu (=
22).
2 Rotate the image.
Press the [ ] or [ ] button, depending
on the desired direction. Each time you
press the button, the image is rotated
90°. Press the [ ] button to complete the
setting.
Using the Menu
1 Choose [Rotate].
Press the [ ] button and choose
[Rotate] on the [ ] tab (=
23).
2 Rotate the image.
Press the [ ][ ] buttons to choose an
image.
The image is rotated 90° each time you
press the [ ] button.
To return to the menu screen, press the
[] button.
• Rotation is not possible when [Auto Rotate] is set to [O] (=
66).
Deactivating Auto Rotation
Follow these steps to deactivate automatic image rotation, which rotates
images based on the current camera orientation.
Press the [ ] button, choose
[Auto Rotate] on the [ ] tab, and then
choose [O] (=
23).
• Images cannot be rotated (=
66) when you set [Auto Rotate] to
[O]. Additionally, images already rotated will be displayed in the
original orientation.
67
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Still Images Movies
Tagging Images as Favorites
You can organize images by tagging them as favorites. By choosing a
category in ltered playback, you can restrict the following operations to all
of those images.
• “Viewing” (=
57), “Viewing Slideshows” (=
60), “Protecting Images”
(=
61), “Erasing Images” (=
64), “Adding Images to the Print List
(DPOF)” (=
119), “Adding Images to a Photobook” (=
121)
Press the [ ] button, and then choose
[] in the menu (=
22).
[Tagged as Favorite] is displayed.
To untag the image, repeat this process
and choose [ ] again, and then press
the [ ] button.
Using the Menu
1 Choose [Favorites].
Press the [ ] button and choose
[Favorites] on the [ ] tab (=
23).
2 Choose an image.
Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
[] is displayed.
To untag the image, press the [ ] button
again. [ ] is no longer displayed.
Repeat this process to choose additional
images.
3 Finish the setup process.
Press the [ ] button. A conrmation
message is displayed.
Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
• Images will not be tagged as favorites if you switch to Shooting
mode or turn the camera o before nishing the setup process in
step 3.
68
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Editing Still Images
• Image editing (=
68 – 69) is only available when the memory
card has sucient free space.
Still Images
Resizing Images
Save a copy of images at a lower number of recording pixels.
1 Choose [Resize].
Press the [ ] button and choose
[Resize] on the [ ] tab (=
23).
2 Choose an image.
Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
3 Choose an image size.
Press the [ ][ ] buttons to choose the
size, and then press the [ ] button.
[Save new image?] is displayed.
4 Save the new image.
Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
The image is now saved as a new le.
5 Review the new image.
Press the [ ] button. [Select image
to display] is displayed.
Press the [ ][ ] buttons to choose
[Processed img.], and then press the [ ]
button.
The saved image is now displayed.
• Editing is not possible for images shot at a recording pixel setting of
[] or [ ] (=
35).
• Images cannot be resized to a higher number of recording pixels.
Still Images
Correcting Image Brightness (i-Contrast)
Excessively dark image areas (such as faces or backgrounds) can be
detected and automatically adjusted to the optimal brightness. Insucient
overall image contrast is also automatically corrected, to make subjects
stand out better. Choose from four correction levels, and then save the
image as a separate le.
1 Choose [i-Contrast].
Press the [ ] button, and then
choose [i-Contrast] on the [ ] tab
(=
23).
2 Choose an image.
Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
69
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
3 Choose an option.
Press the [ ][ ] buttons to choose an
option, and then press the [ ] button.
4 Save as a new image and
review.
Follow steps 4 – 5 in “Resizing Images”
(=
68).
• For some images, correction may be inaccurate or may cause
images to appear grainy.
• Images may look grainy after repeated editing using this function.
• If [Auto] does not produce the expected results, try correcting images using
[Low], [Medium], or [High].
Still Images
Correcting Red-Eye
Automatically corrects images aected by red-eye. You can save the
corrected image as a separate le.
1 Choose [Red-Eye Correction].
Press the [ ] button, and then
choose [Red-Eye Correction] on the [ ]
tab (=
23).
2 Choose an image.
Press the [ ][ ] buttons to choose an
image.
3 Correct the image.
Press the [ ] button.
Red-eye detected by the camera is now
corrected, and frames are displayed
around corrected image areas.
Enlarge or reduce images as needed.
Follow the steps in “Magnifying Images”
(=
60).
4 Save as a new image and
review.
Press the [ ][ ][ ][ ] buttons to choose
[New File], and then press the [ ] button.
The image is now saved as a new le.
Follow step 5 in “Resizing Images”
(=
68).
• Some images may not be corrected accurately.
• To overwrite the original image with the corrected image, choose
[Overwrite] in step 4. In this case, the original image will be erased.
• Protected images cannot be overwritten.
70
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Wi-Fi Functions
Send images wirelessly from the camera to a variety of compatible devices, and use the camera with Web services
• Before using Wi-Fi, be sure to read “Precautions for Wireless Features (Wi-Fi or Others)” (=
144).
Available Wi-Fi Features .................................. 71
Sending Images to a Smartphone .................. 71
Sending Images to an NFC-Compatible
Smartphone ...........................................................72
Connecting to a Smartphone via
the Wi-Fi Menu ......................................................75
Using Another Access Point .................................. 77
Previous Access Points .........................................77
Saving Images to a Computer ......................... 78
Preparing to Register a Computer ........................ 78
Saving Images to a Connected Computer ............ 79
Sending Images to a Registered Web
Service ............................................................. 83
Registering Web Services ..................................... 83
Uploading Images to Web Services ...................... 86
Printing Images Wirelessly from
a Connected Printer ........................................ 87
Sending Images to Another Camera .............. 89
Image Sending Options ................................... 90
Sending Multiple Images ....................................... 90
Notes on Sending Images ..................................... 91
Choosing the Number of Recording Pixels
(Image Size) ..........................................................92
Adding Comments .................................................92
Sending Images Automatically
(Image Sync) ................................................... 93
Initial Preparations ................................................ 93
Sending Images ....................................................94
Using a Smartphone to View Camera Images
and Control the Camera ................................. 95
Geotagging Images on the Camera ...................... 95
Remote Live View Shooting .................................. 96
Editing or Erasing Wi-Fi Settings ................... 97
Editing Connection Information ............................. 97
Changing the Camera Nickname .......................... 98
Returning the Wi-Fi Settings to Default ................. 98
71
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Available Wi-Fi Features
You can send and receive images and control the camera remotely by
connecting it to these devices and services via Wi-Fi.
• Smartphones and Tablets
Send images to smartphones and tablet computers that have Wi-Fi
functions. Remote live view shooting is also possible from a smartphone
or tablet, and you can geotag your shots remotely.
For convenience in this manual, smartphones, tablets, and other
compatible devices are collectively referred to as “smartphones”.
• Computer
Use software to save camera images to a computer connected via Wi-Fi.
• Web Services
Add your account information to the camera for CANON iMAGE
GATEWAY online photography service or other Web services to send
camera images to the services. Unsent images on the camera can also
be sent to a computer or Web service via CANON iMAGE GATEWAY.
• Printers
Send images wirelessly to a PictBridge-compatible printer (supporting
DPS over IP) to print them.
• Another Camera
Send images wirelessly between Wi-Fi-compatible Canon cameras.
Sending Images to a Smartphone
There are several ways to connect the camera to a smartphone and send
images.
• Connect via NFC (=
72)
Simply touch an NFC-compatible Android smartphone against the
camera to connect the devices.
• Connect via the Wi-Fi menu (=
75)
You can connect the camera to a smartphone as you would connect it to
a computer or other device. Multiple smartphones can be added.
Before connecting to the camera, you must install the free dedicated
Camera Connect app on the smartphone. For details on this application
(supported smartphones and included functions), refer to the Canon
website.
• Canon Wi-Fi-compatible camera users who connect their camera to a
smartphone via Wi-Fi should consider switching from the CameraWindow
mobile app to the Camera Connect mobile app.
72
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Connecting via NFC When Camera Is O or in
Shooting Mode
1 Install Camera Connect.
Refer to the smartphone user manual to
check where the N-Mark ( ) is located.
Activate NFC on the smartphone and
touch the devices’ N-Marks ( ) together
to start Google Play on the smartphone
automatically. Once the Camera Connect
download page is displayed, download
and install the app.
Sending Images to an NFC-Compatible
Smartphone
Use an Android smartphone’s NFC to simplify the process of installing
Camera Connect and connecting to the camera.
Operation when devices are initially connected via NFC varies depending
on the camera mode when the devices are touched together.
• If the camera is o or in Shooting mode when the devices are touched
together, you can choose and send images on the image selection
screen. Once the devices are connected, remote live view shooting is
also possible, and you can geotag your shots remotely (=
95). It’s
easy to reconnect to recent devices, which are listed in the Wi-Fi menu.
• If the camera is in Playback mode when the devices are touched
together, you can choose and send images from the index display shown
for image selection.
Follow the instructions in the following section for NFC-initiated connection
to a camera that is o or in Shooting mode.
73
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
4 Send an image.
Press the [ ][ ][ ][ ] buttons to choose
[Select and send], and then press the [ ]
button.
Press the [ ][ ] buttons to choose
[Select], and then press the [ ] button.
Press the [ ][ ][ ][ ] buttons to choose
an image to send, press the [ ] button to
mark it as selected ([ ]), and then press
the [ ] button.
Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
Press the [ ][ ][ ][ ] buttons to choose
[Send], and then press the [ ] button.
[Transfer completed] is displayed after
the image is sent, and the image transfer
screen is displayed again.
To end the connection, press the
[] button, press the [ ][ ] buttons
on the conrmation screen to choose
[OK], and then press the [ ] button. You
can also use the smartphone to end the
connection.
2 Establish the connection.
Make sure the camera is o or in
Shooting mode.
Touch the N-Mark ( ) on the smartphone
with Camera Connect installed against
the camera’s N-Mark.
The camera starts up automatically.
If the [Device Nickname] screen is
displayed, press the [ ][ ] buttons to
choose [OK], and then press the [ ]
button.
Camera Connect is started on the
smartphone.
The devices are connected automatically.
3 Adjust the privacy setting.
When this screen is displayed, press the
[][ ] buttons to choose [Yes], and then
press the [ ] button.
You can now use the smartphone for
remote live view shooting, or to browse,
transfer, or geotag images on the
camera.
74
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Connecting via NFC When Camera Is in Playback Mode
Press the [ ] button to turn the camera
on.
Touch the smartphone with Camera
Connect installed (=
72) against the
camera’s N-Mark ( ).
Press the [ ][ ][ ][ ] buttons to choose
an image to send, and then press the [ ]
button. [ ] is displayed.
To cancel selection, press the [ ] button
again. [ ] is no longer displayed.
Repeat this process to choose additional
images.
After you nish choosing images, press
the [ ] button.
Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
Press the [ ][ ][ ][ ] buttons to choose
[Send], and then press the [ ] button.
The images are now sent.
• If during connection a message on the camera requests you to enter
the nickname, follow step 2 in “Sending Images to an NFC-Compatible
Smartphone” (=
72) to enter it.
• The camera does not keep a record of smartphones you connect to via NFC in
Playback mode.
• You can preset images to transfer at your desired size (=
90).
• When using NFC, keep the following points in mind.
- Avoid strong impact between the camera and smartphone.
This may damage the devices.
- Depending on the smartphone, the devices may not recognize
each other immediately. In this case, try holding the devices
together in slightly dierent positions. If connection is not
established, keep the devices together until the camera screen is
updated.
- If you attempt connection when the camera is o, a message may
be displayed on the smartphone reminding you to turn on the
camera. If so, turn the camera on and touch the devices together
again.
- Do not place other objects between the camera and smartphone.
Also, note that camera or smartphone covers or similar
accessories may block communication.
• All images in the camera can be viewed from the connected
smartphone when you choose [Yes] in step 3. To keep camera
images private, so that they cannot be viewed from the smartphone,
choose [No] in step 3.
• Once you have registered a smartphone, you can change privacy
settings for it on the camera (=
97).
• Connections require that a memory card be in the camera.
• You can also change the camera nickname on the screen in step 2 (=
73).
• You can also send multiple images at once and change the image size before
sending (=
90).
• You can send the current image by choosing [Send this image] on the screen
in step 4.
• To disable NFC connections, choose MENU (=
23) > [ ] tab > [Wireless
settings] > [Wi-Fi Settings] > [NFC] > [O].
75
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
4 Choose [Add a Device].
Press the [ ][ ] buttons to choose [Add
a Device], and then press the [ ] button.
The camera SSID and password are
displayed.
5 Connect the smartphone to a
network.
In the smartphone’s Wi-Fi setting menu,
choose the SSID (network name)
displayed on the camera to establish a
connection.
In the password eld, enter the password
displayed on the camera.
6 Start Camera Connect.
Start Camera Connect on the
smartphone.
Connecting to a Smartphone via the Wi-Fi
Menu
These steps show how to use the camera as an access point, but you can
also use an existing access point (=
77).
1 Install Camera Connect.
For an iPhone or iPad, nd Camera
Connect in the App Store and download
and install the app.
For Android smartphones, nd Camera
Connect in Google Play and download
and install the app.
2 Access the Wi-Fi menu.
Press the [ ] button.
If the [Device Nickname] screen is
displayed, choose [OK].
3 Choose [ ].
Press the [ ][ ][ ][ ] buttons to choose
[], and then press the [ ] button.
76
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
To end the connection, press the
[] button, press the [ ][ ] buttons
on the conrmation screen to choose
[OK], and then press the [ ] button.
You can also use the smartphone to end
the connection.
To add multiple smartphones, repeat the
above procedure starting from step 1.
• All images in the camera can be viewed from the connected
smartphone when you choose [Yes] in step 8. To keep camera
images private, so that they cannot be viewed from the smartphone,
choose [No] in step 8.
• Once you have registered a smartphone, you can change privacy
settings for it on the camera (=
97).
• Connections require that a memory card be in the camera.
• Once you have connected to devices via the Wi-Fi menu, recent destinations
will be listed rst when you access the Wi-Fi menu. You can easily connect
again by pressing the [ ][ ] buttons to choose the device and then pressing
the [ ] button. To add a new device, display the device selection screen by
pressing the [ ][ ] buttons, and then congure the setting.
• If you prefer not to display recent target devices, choose MENU (=
23) >
[] tab > [Wireless settings] > [Wi-Fi Settings] > [Target History] > [O].
• You can also access the screen in step 3 by choosing MENU (=
23) > [ ]
tab > [Wi-Fi connect’n].
• To connect without entering a password in step 5, choose MENU (=
23)
> [ ] tab > [Wireless settings] > [Wi-Fi Settings] > [Password] > [O].
[Password] is no longer displayed on the SSID screen (in step 4).
• You can also send multiple images at once and change the image size before
sending (=
90).
• You can send the current image by choosing [Send this image] on the screen
in step 9.
7 Select the camera to connect to.
On the camera selection screen
displayed on the smartphone, choose the
camera to begin pairing.
8 Adjust the privacy setting.
Press the [ ][ ] buttons to choose [Yes],
and then press the [ ] button.
You can now use the smartphone for
remote live view shooting, or to browse,
transfer, or geotag images on the
camera.
9 Send an image.
Press the [ ][ ][ ][ ] buttons to choose
[Select and send], and then press the [ ]
button.
Press the [ ][ ] buttons to choose
[Select], and then press the [ ] button.
Press the [ ][ ][ ][ ] buttons to choose
an image to send, press the [ ] button to
mark it as selected ([ ]), and then press
the [ ] button.
Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
Press the [ ][ ][ ][ ] buttons to choose
[Send], and then press the [ ] button.
[Transfer completed] is displayed after
the image is sent, and the image transfer
screen is displayed again.
77
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
4 Connect to an access point.
For WPS-compatible access points,
connect to the access point as described
in steps 5 – 8 in “Using WPS-Compatible
Access Points” (=
80).
For non-WPS access points, follow
steps 2 – 4 in “Connecting to Listed
Access Points” (=
82) to connect to
the access point.
5 Select the camera to connect to.
On the camera selection screen
displayed on the smartphone, choose the
camera to begin pairing.
6 Congure the privacy settings
and send images.
Follow steps 8 – 9 in “Connecting to
a Smartphone via the Wi-Fi Menu”
(=
75) to congure the privacy
settings and send images.
Previous Access Points
You can reconnect to any previous access points automatically by following
step 4 in “Connecting to a Smartphone via the Wi-Fi Menu” (=
75).
• To use the camera as an access point, choose [Switch Network] on the
screen displayed when you establish a connection, and then choose
[Camera Access Point Mode].
• To switch access points, choose [Switch Network] on the screen
displayed when you establish a connection, and then follow the
procedure in “Using Another Access Point” (=
77) from step 4.
Using Another Access Point
When connecting the camera to a smartphone through the Wi-Fi menu,
you can also use an existing access point.
1 Prepare for the connection.
Access the [Waiting to connect] screen
by following steps 1 – 4 in “Connecting
to a Smartphone via the Wi-Fi Menu”
(=
75).
2 Connect the smartphone to the
access point.
3 Choose [Switch Network].
Press the [ ][ ] buttons to choose
[Switch Network], and then press the [ ]
button.
A list of detected access points will be
displayed.
78
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
2 Follow the instructions
displayed.
Double-click the downloaded le to
install it.
• Internet access is required, and any ISP account charges and
access fees must be paid separately.
• To uninstall the software, follow these steps.
- Windows: Select [Start] menu > [All Programs] > [Canon Utilities], and then
choose the software for uninstallation.
Saving Images to a Computer
Preparing to Register a Computer
For details on computers that you can connect the camera to via Wi-Fi,
system requirements, and other compatibility information (including support
in new operating systems), visit the Canon website.
• Windows 7 Starter and Home Basic editions are not supported.
• Windows 7 N (European version) and KN (South Korean version)
require a separate download and installation of Windows Media
Feature Pack.
For details, check the following website.
http://go.microsoft.com/fwlink/?LinkId=159730
Installing CameraWindow
1 Download the software.
With a computer connected
to the Internet, access
http://www.canon.com/icpd/.
Choose your country or region, and
then follow the instructions displayed to
prepare for downloading.
79
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Saving Images to a Connected Computer
Connect to your access point via Wi-Fi as follows.
Also refer to the access point user manual.
Conrming Access Point Compatibility
Conrm that the Wi-Fi router or base station conforms to the Wi-Fi
standards in “Interface” (=
140).
Connection methods vary depending on whether the access point supports
Wi-Fi Protected Setup (WPS, =
80) or not (=
82). For non-WPS
access points, check the following information.
• Network name (SSID/ESSID)
The SSID or ESSID for the access point you use. Also called the
“access point name” or “network name”.
• Network authentication / data encryption (encryption method /
encryption mode)
The method for encrypting data during wireless transmission.
Check which security setting is used: WPA2-PSK (AES), WPA2-PSK
(TKIP), WPA-PSK (AES), WPA-PSK (TKIP), WEP (open system
authentication), or no security.
• Password (encryption key / network key)
The key used when encrypting data during wireless transmission.
Also called the “encryption key” or “network key”.
• Key index (transmit key)
The key set when WEP is used for network authentication /
data encryption. Use “1” as the setting.
• If system administrator status is needed to adjust network settings,
contact the system administrator for details.
• These settings are very important for network security.
Exercise adequate caution when changing these settings.
Conguring the Computer for a Wi-Fi Connection
(Windows Only)
On a computer running Windows, congure the following settings before
connecting the camera to the computer wirelessly.
1 Conrm that the computer is
connected to an access point.
For instructions on checking your network
connection, refer to the computer user
manual.
2 Congure the setting.
Click in the following order: [Start] menu
> [All Programs] > [Canon Utilities] >
[CameraWindow] > [Wi-Fi connection
setup].
In the application that opens, follow the
on-screen instructions and congure
the setting.
• The following Windows settings are congured when you run the utility in step 2.
- Turn on media streaming.
This will enable the camera to see (nd) the computer to access via Wi-Fi.
- Turn on network discovery.
This will enable the computer to see (nd) the camera.
- Turn on ICMP (Internet Control Message Protocol).
This allows you to check the network connection status.
- Enable Universal Plug & Play (UPnP).
This will enable network devices to detect each other automatically.
• Some security software may prevent you from completing the settings as
described here. Check the settings of your security software.
80
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
If the [Device Nickname] screen is
displayed, press the [ ][ ] buttons to
choose [OK], and then press the [ ]
button.
3 Choose [ ].
Press the [ ][ ][ ][ ] buttons to choose
[], and then press the [ ] button.
4 Choose [Add a Device].
Press the [ ][ ] buttons to choose [Add
a Device], and then press the [ ] button.
5 Choose [Connect with WPS].
Press the [ ][ ] buttons to choose
[Connect with WPS], and then press the
[] button.
• For information on WPS compatibility and for instructions on checking settings,
refer to the access point user manual.
• A router is a device that creates a network (LAN) structure for connecting
multiple computers. A router that contains an internal Wi-Fi function is called a
“Wi-Fi router”.
• This guide refers to all Wi-Fi routers and base stations as “access points”.
• If you use MAC address ltering on your Wi-Fi network, be sure to add the
camera’s MAC address to your access point. You can check your camera’s
MAC address by choosing MENU (=
23) > [ ] tab > [Wireless settings] >
[Wi-Fi Settings] > [Check MAC Address].
Using WPS-Compatible Access Points
WPS makes it easy to complete settings when connecting devices over
Wi-Fi. You can use either Push Button Conguration Method or PIN Method
for settings on a WPS supported device.
1 Conrm that the computer is
connected to an access point.
For instructions on checking the
connection, refer to the device and
access point user manuals.
2 Access the Wi-Fi menu.
Press the [ ] button.
81
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
9 Install a driver (rst Windows
connection only).
When this screen is displayed on the
camera, click the Start menu on the
computer, click [Control Panel], and then
click [Add a device].
Double-click the connected camera icon.
Driver installation will begin.
After driver installation is complete, and
the camera and computer connection
is enabled, the AutoPlay screen will be
displayed. Nothing will be displayed on
the camera screen.
10
Display CameraWindow.
Windows: Access CameraWindow by
clicking [Downloads Images From Canon
Camera].
6 Choose [WPS (PBC mode)].
Press the [ ][ ] buttons to choose
[WPS (PBC mode)], and then press the
[] button.
7 Establish the connection.
On the access point, hold down the WPS
connection button for a few seconds.
On the camera, press the [ ] button to
go to the next step.
The camera connects to the access point
and lists devices connected to it on the
[Select a Device] screen.
8 Choose the target device.
Press the [ ][ ] buttons to choose the
target device name, and then press the
[] button.
82
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Connecting to Listed Access Points
1 View the listed access points.
View the listed networks (access points)
as described in steps 1 – 4 of “Using
WPS-Compatible Access Points”
(=
80).
2 Choose an access point.
Press the [ ][ ] buttons to choose a
network (access point), and then press
the [ ] button.
3 Enter the access point
password.
Press the [ ] button to access the
keyboard, and then enter the password
(=
24).
Press the [ ][ ] buttons to choose
[Next], and then press the [ ] button.
4 Choose [Auto].
Press the [ ][ ] buttons to choose
[Auto], and then press the [ ] button.
To save images to a connected computer,
follow the procedure from step 8 in
“Using WPS-Compatible Access Points”
(=
80).
11
Import images.
Click [Import Images from Camera], and
then click [Import Untransferred Images].
Images are now saved to the Pictures
folder on the computer, in separate
folders named by date.
Click [OK] in the screen that is displayed
after image import is complete.
To view images you save to a computer,
use preinstalled or commonly available
software compatible with images
captured by the camera.
• Once you have connected to devices via the Wi-Fi menu, recent destinations
will be listed rst when you access the Wi-Fi menu. You can easily connect
again by pressing the [ ][ ] buttons to choose the device and then pressing
the [ ] button. To add a new device, display the device selection screen by
pressing the [ ][ ] buttons, and then congure the setting.
• If you prefer not to display recent target devices, choose MENU (=
23) >
[] tab > [Wireless settings] > [Wi-Fi Settings] > [Target History] > [O].
• You can also change the camera nickname on the screen in step 2 (=
80).
• When the camera is connected to a computer, the camera screen is blank.
• To disconnect from the camera, turn o the camera.
• If you chose [WPS (PIN mode)] in step 6, a PIN code will be displayed on the
screen. Be sure to set this code in the access point. Choose a device in the
[Select a Device] screen. For further details, refer to the user manual included
with your access point.
83
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Sending Images to a Registered Web
Service
Registering Web Services
Use a smartphone or computer to add to the camera Web services that you
want to use.
• A smartphone or computer with a browser and Internet connection is
required to complete camera settings for CANON iMAGE GATEWAY and
other Web services.
• Check the CANON iMAGE GATEWAY website for details on browser
(Microsoft Internet Explorer, etc.) requirements, including settings and
version information.
• For information on countries and regions where CANON
iMAGE GATEWAY is available, visit the Canon website
(http://www.canon.com/cig/).
• You must have an account with Web services other than CANON iMAGE
GATEWAY if you desire to use them. For further details, check the
websites for each Web service you want to register.
• Separate ISP connection and access point fees may be applicable.
• CANON iMAGE GATEWAY also provides user guides for downloading.
• To determine the access point password, check on the access point itself or
refer to the user manual.
• If no access points are detected even after you choose [Refresh] in step 2 to
update the list, choose [Manual Settings] in step 2 to complete access point
settings manually. Follow on-screen instructions and enter an SSID, security
settings, and a password.
• When you use an access point that you have already connected to for
connecting to another device, [*] is displayed for the password in step 3.
To use the same password, press the [ ][ ] buttons to choose [Next],
and then press the [ ] button.
Previous Access Points
You can reconnect to any previous access points automatically by following
step 4 in “Using WPS-Compatible Access Points” (=
80).
• To connect to a device via an access point, conrm that the target device
is already connected to the access point, and then follow the procedure
from step 8 in “Using WPS-Compatible Access Points” (=
80).
• To switch access points, choose [Switch Network] on the screen
displayed when you establish a connection, and then either follow the
procedure in “Using WPS-Compatible Access Points” (=
80) from
step 5 or the procedure in “Connecting to Listed Access Points” (=
82)
from step 2.
84
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
3 Accept the agreement to enter
an email address.
Read the agreement displayed, press the
[][ ] buttons to choose [I Agree], and
then press the [ ] button.
4 Establish a connection with an
access point.
Connect to the access point as described
in steps 5 – 7 in “Using WPS-Compatible
Access Points” (=
80) or in steps 2 – 4
in “Connecting to Listed Access Points”
(=
82).
5 Enter your email address.
Once the camera is connected to CANON
iMAGE GATEWAY via the access point, a
screen is displayed for entering an email
address.
Enter your email address, press the
[][ ] buttons to choose [Next], and
then press the [ ] button.
6 Enter a four-digit number.
Enter a four-digit number of your choice,
press the [ ][ ] buttons to choose
[Next], and then press the [ ] button.
You will need this four-digit number later
when setting up linkage with CANON
iMAGE GATEWAY in step 8.
Registering CANON iMAGE GATEWAY
Link the camera and CANON iMAGE GATEWAY by adding CANON iMAGE
GATEWAY as a destination Web service on the camera. Note that you will
need to enter an email address used on your computer or smartphone to
receive a notication message for completing linkage settings.
1 Access the Wi-Fi menu.
Press the [ ] button.
If the [Device Nickname] screen is
displayed, press the [ ][ ] buttons to
choose [OK], and then press the [ ]
button.
2 Choose [ ].
Press the [ ][ ][ ][ ] buttons to choose
[], and then press the [ ] button.
85
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
9 Complete CANON iMAGE
GATEWAY settings on the
camera.
Press the [ ][ ][ ][ ] buttons to choose
[], and then press the [ ] button.
[ ] (=
93) and CANON iMAGE
GATEWAY are now added as
destinations.
You can add other Web services,
as needed. In this case, follow the
instructions from step 2 in “Registering
Other Web Services” (=
86).
• Make sure initially that your computer or smartphone mail
application is not congured to block email from relevant domains,
which may prevent you from receiving the notication message.
• You can also change the camera nickname on the screen in step 1 (=
84).
• Once you have connected to devices via the Wi-Fi menu, recent destinations
will be listed rst when you access the menu. Press the [ ][ ] buttons to
access the device selection screen and then congure the setting.
7 Check for the notication
message.
Once information has been sent to
CANON iMAGE GATEWAY, you will
receive a notication message at the
email address entered in step 5.
Press the [ ] button on the next screen,
which indicates that notication has been
sent.
[ ] now changes to [ ].
8 Access the page in the
notication message and
complete camera link settings.
From a computer or smartphone,
access the page linked in the notication
message.
Follow the instructions to complete the
settings on the camera link settings page.
86
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Uploading Images to Web Services
1 Access the Wi-Fi menu.
Press the [ ] button.
2 Choose the destination.
Press the [ ][ ][ ][ ] buttons to choose
the icon of the Web service to connect to,
and then press the [ ] button.
If multiple recipients or sharing options
are used with a Web service, choose the
desired item on the [Select Recipient]
screen by pressing the [ ][ ] buttons,
and then press the [ ] button.
3 Send an image.
Press the [ ][ ][ ][ ] buttons to choose
[Select and send], and then press the [ ]
button.
Press the [ ][ ] buttons to choose
[Select], and then press the [ ] button.
Press the [ ][ ][ ][ ] buttons to choose
an image to send, press the [ ] button to
mark it as selected ([ ]), and then press
the [ ] button.
Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
Press the [ ][ ][ ][ ] buttons to choose
[Send], and then press the [ ] button.
Registering Other Web Services
You can also add Web services besides CANON iMAGE GATEWAY to the
camera.
1 Log in to CANON iMAGE
GATEWAY and access the
camera link settings page.
From a computer or smartphone, access
http://www.canon.com/cig/ to visit
CANON iMAGE GATEWAY.
2 Congure the Web service you
want to use.
On the computer or smartphone, display
the Web service settings screen.
Follow the on-screen instructions to
complete settings for Web services you
want to use.
3 Choose [ ].
Press the [ ] button.
Press the [ ][ ][ ][ ] buttons to choose
[], and then press the [ ] button.
The Web service settings are now
updated.
• If any congured settings change, follow these steps again to update the
camera settings.
87
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Printing Images Wirelessly from a
Connected Printer
Connect the camera to a printer via Wi-Fi to print as follows.
These steps show how to use the camera as an access point, but you can
also use an existing access point (=
77).
1 Access the Wi-Fi menu.
Press the [ ] button.
2 Choose [ ].
Press the [ ][ ][ ][ ] buttons to choose
[], and then press the [ ] button.
3 Choose [Add a Device].
Press the [ ][ ] buttons to choose [Add
a Device], and then press the [ ] button.
The camera SSID and password are
displayed.
When uploading to YouTube, read the
terms of service, choose [I Agree], and
press the [ ] button.
Press the [ ] button to return to the
playback screen once [OK] is displayed
after the image is sent.
• Connections require that a memory card with saved images be in the camera.
• You can also send multiple images at once, resize images, and add comments
before sending (=
90).
• You can send the current image by choosing [Send this image] on the screen
in step 3.
• To view images uploaded to CANON iMAGE GATEWAY on a smartphone,
try the dedicated Canon Online Photo Album app. Download and install the
Canon Online Photo Album app for iPhones or iPads from the App Store or for
Android devices from Google Play.
88
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
• Connections require that a memory card with saved images be in the camera.
• Once you have connected to devices via the Wi-Fi menu, recent destinations
will be listed rst when you access the Wi-Fi menu. You can easily connect
again by pressing the [ ][ ] buttons to choose the device and then pressing
the [ ] button. To add a new device, display the device selection screen by
pressing the [ ][ ] buttons, and then congure the setting.
• If you prefer not to display recent target devices, choose MENU (=
23) >
[] tab > [Wireless settings] > [Wi-Fi Settings] > [Target History] > [O].
• To connect without entering a password in step 4, choose MENU (=
23)
> [ ] tab > [Wireless settings] > [Wi-Fi Settings] > [Password] > [O].
[Password] is no longer displayed on the SSID screen (in step 3).
• To use another access point, follow steps 3 – 4 in “Using Another Access
Point” (=
77).
4 Connect the printer to the
network.
In the printer’s Wi-Fi setting menu,
choose the SSID (network name)
displayed on the camera to establish a
connection.
In the password eld, enter the password
displayed on the camera.
5 Choose the printer.
Press the [ ][ ] buttons to choose the
printer name, and then press the [ ]
button.
6 Choose an image to print.
Press the [ ][ ] buttons to choose an
image.
Press the [ ] button, choose [ ], and
press the [ ] button again.
Press the [ ][ ] buttons to choose
[Print], and then press the [ ] button.
For detailed printing instructions, see
“Printing Images” (=
115).
To end the connection, press the [ ]
button, press the [ ][ ] buttons on the
conrmation screen to choose [OK], and
then press the [ ] button.
89
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
4 Send an image.
Press the [ ][ ][ ][ ] buttons to choose
[Select and send], and then press the [ ]
button.
Press the [ ][ ] buttons to choose
[Select], and then press the [ ] button.
Press the [ ][ ][ ][ ] buttons to choose
an image to send, press the [ ] button to
mark it as selected ([ ]), and then press
the [ ] button.
Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
Press the [ ][ ][ ][ ] buttons to choose
[Send], and then press the [ ] button.
[Transfer completed] is displayed after
the image is sent, and the image transfer
screen is displayed again.
To end the connection, press the
[] button, press the [ ][ ] buttons
on the conrmation screen to choose
[OK], and then press the [ ] button.
Sending Images to Another Camera
Connect two cameras via Wi-Fi and send images between them as follows.
• Only Wi-Fi compatible Canon cameras can be connected via Wi-Fi.
You cannot connect to a Canon camera unless it is Wi-Fi compatible,
even if it supports FlashAir/Eye-Fi cards.
1 Access the Wi-Fi menu.
Press the [ ] button.
2 Choose [ ].
Press the [ ][ ][ ][ ] buttons to choose
[], and then press the [ ] button.
3 Choose [Add a Device].
Press the [ ][ ] buttons to choose [Add
a Device], and then press the [ ] button.
Follow steps 1 – 3 on the target camera
too.
Camera connection information will be
added when [Start connection on target
camera] is displayed on both camera
screens.
90
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Image Sending Options
You can choose multiple images to send at once and change the image
recording pixel setting (size) before sending. Some Web services also
enable you to annotate the images you send.
Sending Multiple Images
On the image transfer screen, specify a range of images to send, or send
only images tagged as favorites.
1 Choose [Select and send].
On the image transfer screen, press the
[][ ] buttons to choose [Select and
send], and then press the [ ] button.
2 Choose a selection method.
Press the [ ][ ] buttons to choose a
selection method.
Selecting a Range 1 Choose [Select Range].
Following step 2 in “Sending Multiple
Images” (=
90), choose [Select
Range] and press the [ ] button.
• Connections require that a memory card be in the camera.
• Once you have connected to devices via the Wi-Fi menu, recent destinations
will be listed rst when you access the Wi-Fi menu. You can easily connect
again by pressing the [ ][ ] buttons to choose the device and then pressing
the [ ] button. To add a new device, display the device selection screen by
pressing the [ ][ ] buttons, and then congure the setting.
• If you prefer not to display recent target devices, choose MENU (=
23) >
[] tab > [Wireless settings] > [Wi-Fi Settings] > [Target History] > [O].
• You can also send multiple images at once and change the image size before
sending (=
90).
• You can send the current image by choosing [Send this image] on the screen
in step 4.
91
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
• In step 1, [Favorite Images] is not available unless you have tagged images
as favorites.
Notes on Sending Images
• Depending on the condition of the network you are using, it may take a
long time to send movies. Be sure to keep an eye on the camera battery
level.
•
Web services may limit the number of images or length of movies you can
send.
• When sending movies to smartphones, note that the supported image
quality varies depending on the smartphone. For details, refer to the
smartphone user manual.
• On the screen, wireless signal strength is indicated by the following
icons.
[ ] high, [ ] medium, [ ] low, [ ] weak
• Sending images to Web services will take less time when resending
images you have already sent that are still on the CANON iMAGE
GATEWAY server.
2 Choose images.
Follow steps 2 – 3 in “Selecting a Range”
(=
62) to specify images.
To include movies, press the
[][ ][ ][ ] buttons to choose [Incl.
Movies], and then press the [ ] button to
mark the option as selected ( ).
Press the [ ][ ][ ][ ] buttons to choose
[OK], and then press the [ ] button.
3 Send the images.
Press the [ ][ ] buttons to choose
[Send], and then press the [ ] button.
Sending Favorite Images
Send only images tagged as favorites (=
67).
1 Choose [Favorite Images].
Following step 2 in “Sending Multiple
Images” (=
90), choose [Favorite
Images] and press the [ ] button.
An image selection screen for favorites is
displayed. If you prefer not to include an
image, choose the image and press the
[] button to remove [ ].
Press the [ ] button.
Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
2 Send the images.
Press the [ ][ ] buttons to choose
[Send], and then press the [ ] button.
92
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Adding Comments
Using the camera, you can add comments to images that you send to
e-mail addresses, social networking services, etc. The number of characters
and symbols that can be entered may dier depending on the Web service.
1 Access the screen for adding
comments.
On the image transfer screen, choose
[] by pressing the [ ][ ][ ][ ] buttons,
and then press the [ ] button.
2 Add a comment (=
24).
3 Send the image.
• When a comment is not entered, the comment set in CANON iMAGE
GATEWAY is automatically sent.
• You can also annotate multiple images before sending them. The same
comment is added to all images sent together.
Choosing the Number of Recording Pixels
(Image Size)
On the image transfer screen, choose [ ] by pressing the [ ][ ] buttons,
and then press the [ ] button. On the screen displayed, choose the
recording pixel setting (image size) by pressing the [ ][ ] buttons, and
then press the [ ] button.
• To send images at original size, select [No] as the resizing option.
• Choosing [ ] will resize images that are larger than the selected size
before sending.
• Movies cannot be resized.
• Image size can also be congured in MENU (=
23) > [ ] tab > [Wireless
settings] > [Wi-Fi Settings] > [Resize for Sending].
93
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
2 Choose the type of images
to send (only when sending
movies with images).
Press the [ ] button, choose
[Wireless settings] on the [ ] tab, and
then choose [Wi-Fi Settings] (=
23).
Press the [ ][ ] buttons to choose
[Image Sync], and then press the [ ][ ]
buttons to choose [Stills/Movies].
Preparing the Computer
Install and congure the software on the destination computer.
1 Install Image Transfer Utility.
Image Transfer Utility is also installed
when you install CameraWindow on
a computer connected to the Internet
(=
78).
Image Transfer Utility can also be
downloaded from the Image Sync
settings page of CANON iMAGE
GATEWAY (=
84).
Sending Images Automatically
(Image Sync)
Images on the memory card that have not been transferred already can be
sent to a computer or Web services via CANON iMAGE GATEWAY.
Note that images cannot be sent only to Web services.
Initial Preparations
Preparing the Camera
Register [ ] as the destination. On the destination computer, you will
install and congure Image Transfer Utility, free software compatible with
Image Sync.
1 Add [ ] as a destination.
Add [ ] as a destination, as described in
“Registering CANON iMAGE GATEWAY”
(=
84).
To include a Web service as the
destination, log in to CANON iMAGE
GATEWAY (=
84), select your camera
model, access the Web service settings
screen, and choose the destination
Web service in Image Sync settings.
For details, refer to CANON iMAGE
GATEWAY Help.
94
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Sending Images
Images sent from the camera are automatically saved to the computer.
If the computer that you intend to send images to is turned o, the images
will be stored temporarily on the CANON iMAGE GATEWAY server.
Stored images are regularly erased, so make sure to turn on the computer
and save the images.
1 Send images.
Follow steps 1 – 2 in “Uploading Images to
Web Services” (=
86) and choose [ ].
Sent images are labeled with a [ ] icon.
2 Save the images to the
computer.
Images are automatically saved to the
computer when you turn it on.
Images are automatically sent to Web
services from the CANON iMAGE
GATEWAY server, even if the computer
is o.
• When sending images, you should use a fully charged battery pack.
• Even if images were imported to the computer through a dierent method,
any images not sent to the computer via CANON iMAGE GATEWAY will be
sent to the computer.
• Sending is faster when the destination is a computer on the same network
as the camera, because images are sent via the access point instead of
CANON iMAGE GATEWAY. Note that images stored on the computer are
sent to CANON iMAGE GATEWAY, so the computer must be connected to
the Internet.
2 Register the camera.
Windows: In the taskbar, right-click [ ],
and then click [Add new camera].
Mac OS: In the menu bar, click [ ],
and then click [Add new camera].
A list of cameras linked to CANON
iMAGE GATEWAY is displayed.
Choose the camera from which images
are to be sent.
Once the camera is registered and the
computer is ready to receive images,
the icon changes to [ ].
95
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Using a Smartphone to View Camera
Images and Control the Camera
You can do the following with the dedicated smartphone app Camera
Connect.
• Browse images on the camera and save them to the smartphone
• Geotag images on the camera (=
95)
• Shoot using remote live view (=
96)
• In camera settings, the smartphone must be allowed to view camera
images (=
75, =
97).
Geotagging Images on the Camera
GPS data recorded on a smartphone using the dedicated Camera Connect
application can be added to images on the camera. Images are tagged with
information including the latitude, longitude, and elevation.
• Before shooting, make sure the date and time and your home time zone are
set correctly, as described in “Setting the Date and Time” (=
12). Also follow
the steps in “World Clock” (=
102) to specify any shooting destinations in
other time zones.
• Others may be able to locate or identify you by using location data in your
geotagged still images or movies. Be careful when sharing these images with
others, as when posting images online where many others can view them.
Viewing Images Sent via Image Sync on a Smartphone
By installing the Canon Online Photo Album (Canon OPA) app, you can use
your smartphone to view and download images sent via Image Sync while
they are stored temporarily on the CANON iMAGE GATEWAY server.
In preparation, enable smartphone access as follows.
• Make sure you have completed the settings described in “Preparing the
Computer” (=
93).
• Download and install the Canon Online Photo Album app for iPhones or
iPads from the App Store or for Android devices from Google Play.
• Log in to CANON iMAGE GATEWAY (=
84), select your camera
model, access the Web service settings screen, and enable viewing and
downloading from a smartphone in the Image Sync settings. For details,
refer to CANON iMAGE GATEWAY Help.
• Once images stored temporarily on the CANON iMAGE GATEWAY
server have been deleted, they can no longer be viewed.
• Images you sent before enabling smartphone viewing and
downloading in Image Sync settings cannot be accessed this way.
• For Canon Online Photo Album instructions, refer to Canon Online Photo
Album Help.
96
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
4 Shoot.
Use the smartphone to shoot.
• The camera works in [ ] mode during shooting. However, some
FUNC. and MENU settings you have congured in advance may be
changed automatically.
• Movie shooting is not available.
• Any rough subject motion shown on the smartphone due to the connection
environment will not aect recorded images.
• Captured images are not transferred to the smartphone. Use the smartphone
to browse and transfer images from the camera.
Remote Live View Shooting
As you check a shooting screen on your smartphone, you can use it to
shoot remotely.
1 Secure the camera.
Once remote live view shooting begins,
the camera lens comes out. Lens motion
from zooming may also move the camera
out of position. Keep the camera still by
mounting it on a tripod or taking other
measures.
2 Connect the camera and
smartphone (=
75).
In the privacy settings, choose [Yes].
3 Choose remote live view
shooting.
In Camera Connect on the smartphone,
choose remote live view shooting.
The camera lens will come out. Keep
your ngers away from the lens, and
make sure no objects will obstruct it.
Once the camera is ready for remote
live view shooting, a live image from the
camera is displayed on the smartphone.
At this time, a message is displayed
on the camera, and all operations
except pressing the ON/OFF button are
disabled.
97
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
4 Choose an item to edit.
Press the [ ][ ] buttons to choose
the item to edit, and then press the [ ]
button.
The items you can change depend on the
device or service.
Congurable Items
Connection
Web
Services
[Change Device Nickname] (=
97)
OOOO
–
[View Settings] (=
75)–
O
– – –
[Erase Connection Info] (=
98)
OOOO
–
O
: Congurable – : Not congurable
Changing a Device Nickname
You can change the device nickname (display name) that is displayed on
the camera.
Following step 4 in “Editing Connection
Information” (=
97), choose [Change
Device Nickname] and press the [ ]
button.
Select the input eld and press the [ ]
button. Use the keyboard displayed to
enter a new nickname (=
24).
Editing or Erasing Wi-Fi Settings
Edit or erase Wi-Fi settings as follows.
Editing Connection Information
1 Access the Wi-Fi menu and
choose a device to edit.
Press the [ ] button.
Press the [ ][ ] buttons to access
the device selection screen, press the
[][ ][ ][ ] buttons to choose the icon
of a device to edit, and then press the
[] button.
2 Choose [Edit a Device].
Press the [ ][ ] buttons to choose [Edit
a Device], and then press the [ ] button.
3 Choose a device to edit.
Press the [ ][ ] buttons to choose the
device to edit, and then press the [ ]
button.
98
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
3 Change the nickname.
Press the [ ] button to access the
keyboard (=
24), and then enter a
nickname.
• A message is displayed if the nickname you enter begins with a symbol or
space. Press the [ ] button and enter a dierent nickname.
• You can also change the nickname from the [Nickname] screen displayed
when you rst use Wi-Fi. In this case, select the text box, press the [ ] button
to access the keyboard, and then enter a new nickname.
Returning the Wi-Fi Settings to Default
Return the Wi-Fi settings to default if you transfer ownership of the camera
to another person, or dispose of it.
Resetting the Wi-Fi settings will also clear all Web service settings. Be sure
that you want to reset all Wi-Fi settings before using this option.
1 Choose [Wireless settings].
Press the [ ] button and choose
[Wireless settings] on the [ ] tab
(=
23).
Erasing Connection Information
Erase connection information (information about devices that you have
connected to) as follows.
Following step 4 in “Editing Connection
Information” (=
97), choose [Erase
Connection Info] and press the [ ]
button.
After [Erase?] is displayed, press the
[][ ] buttons to choose [OK], and then
press the [ ] button.
The connection information will be
erased.
Changing the Camera Nickname
Change the camera nickname (displayed on connected devices) as desired.
1 Choose [Wireless settings].
Press the [ ] button and choose
[Wireless settings] on the [ ] tab
(=
23).
2 Choose [Nickname].
Press the [ ][ ] buttons to choose
[Nickname], and then press the [ ]
button.
99
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
2 Choose [Reset Settings].
Press the [ ][ ] buttons to choose
[Reset Settings], and then press the [ ]
button.
3 Restore the default settings.
Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
The Wi-Fi settings are now reset.
• To reset other settings (aside from Wi-Fi) to defaults, choose [Reset All] on the
[] tab (=
107).
100
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Setting Menu
Customize or adjust basic camera functions for greater convenience
Adjusting Basic Camera Functions .............. 101
Silencing Camera Operations ............................. 101
Adjusting the Volume .......................................... 101
Hiding Hints and Tips .......................................... 101
Date and Time .....................................................101
World Clock ......................................................... 102
Lens Retraction Timing .......................................102
Using Eco Mode ..................................................102
Power-Saving Adjustment ................................... 103
Screen Brightness ...............................................104
Hiding the Start-Up Screen ................................. 104
Formatting Memory Cards .................................. 104
File Numbering ....................................................105
Date-Based Image Storage ................................. 106
Metric / Non-Metric Display ................................. 106
Checking Certication Logos .............................. 106
Display Language ............................................... 106
Adjusting Other Settings ..................................... 107
Restoring Default Camera Settings ..................... 107
101
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Adjusting Basic Camera Functions
Basic camera functions are congured on the [ ] tab of the MENU
(=
23). Customize commonly used functions as desired, for greater
convenience.
Silencing Camera Operations
Silence camera sounds and movies as follows.
Choose [Mute], and then choose [On].
• Operation can also be silenced by holding down the [ ] button as you
turn the camera on.
• Sound is not played during movies (=
57) if you mute camera sounds.
To restore sound during movies, press the [ ] button. Adjust volume with the
[][ ] buttons, as needed.
Adjusting the Volume
Adjust the volume of individual camera sounds as follows.
Choose [Volume], and then press the [ ]
button.
Choose an item, and then press the
[][ ] buttons to adjust the volume.
Hiding Hints and Tips
Hints and tips are normally shown when you choose FUNC. (=
22)
items. If you prefer, you can deactivate this information.
Choose [Hints & Tips], and then choose
[O].
Date and Time
Adjust the date and time as follows.
Choose [Date/Time], and then press the
[] button.
Press the [ ][ ] buttons to choose an
option, and then press the [ ][ ] buttons
to adjust the setting.
102
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
World Clock
To ensure that your shots will have the correct local date and time when you
travel abroad, simply register the destination in advance and switch to that
time zone. This convenient feature eliminates the need to change the Date/
Time setting manually.
Before using the world clock, be sure to set the date and time and your
home time zone, as described in “Setting the Date and Time” (=
12).
1 Specify your destination.
Choose [Time Zone], and then press the
[] button.
Press the [ ][ ] buttons to choose
[ World], and then press the [ ] button.
Press the [ ][ ] buttons to choose the
destination.
To set daylight saving time (1 hour
ahead), choose [ ] by pressing the
[][ ] buttons, and then choose [ ] by
pressing the [ ][ ] buttons.
Press the [ ] button.
2 Switch to the destination time
zone.
Press the [ ][ ] buttons to choose
[ World], and then press the [ ]
button.
[ ] is now shown on the shooting screen
(=
130).
• Adjusting the date or time while in [ ] mode (=
13) will automatically
update your [ Home] time and date.
Lens Retraction Timing
The lens is normally retracted for safety about one minute after you press
the [ ] button in Shooting mode (=
20). To have the lens retracted
immediately after you press the [ ] button, set the retraction timing to
[0 sec.].
Choose [Lens Retraction], and then
choose [0 sec.].
Using Eco Mode
This function allows you to conserve battery power in Shooting mode.
When the camera is not in use, the screen quickly darkens to reduce
battery consumption.
1 Congure the setting.
Choose [Eco Mode], and then choose
[On].
[ ] is now shown on the shooting
screen (=
130).
The screen darkens when the camera
is not used for approximately two
seconds; approximately ten seconds
after darkening, the screen turns o.
The camera turns o after approximately
three minutes of inactivity.
103
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
2 Shoot.
To activate the screen and prepare for
shooting when the screen is o but the
lens is still out, press the shutter button
halfway.
Power-Saving Adjustment
Adjust the timing of automatic camera and screen deactivation (Auto Power
Down and Display O, respectively) as needed (=
20).
Choose [Power Saving], and then press
the [ ] button.
After choosing an item, press the [ ][ ]
buttons to adjust it as needed.
• To conserve battery power, you should normally choose [On] for
[Auto Power Down] and [1 min.] or less for [Display O].
• The [Display O] setting is applied even if you set [Auto Power Down] to [O].
• These power-saving functions are not available when you have set Eco mode
(=
102) to [On].
104
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Screen Brightness
Adjust screen brightness as follows.
Choose [Disp. Brightness], and then
press the [ ][ ] buttons to adjust the
brightness.
• For maximum brightness, press and hold the [ ] button for at least one
second when the shooting screen is displayed or when in single-image display.
(This will override the [Disp. Brightness] setting on the [ ] tab.) To restore
the original brightness, press and hold the [ ] button again for at least one
second or restart the camera.
Hiding the Start-Up Screen
If you prefer, you can deactivate display of the start-up screen normally
shown when you turn the camera on.
Choose [Start-up Image], and then
choose [O].
Formatting Memory Cards
Before using a new memory card or a card formatted in another device, you
should format the card with this camera.
Formatting erases all data on a memory card. Before formatting, copy images
on the memory card to a computer, or take other steps to back them up.
1 Access the [Format] screen.
Choose [Format], and then press the [ ]
button.
2 Choose [OK].
Press the [ ][ ] buttons to choose
[Cancel], press the [ ][ ] buttons to
choose [OK], and then press the [ ]
button.
3 Format the memory card.
To begin the formatting process, press
the [ ][ ] buttons to choose [OK], and
then press the [ ] button.
When formatting is nished, [Memory
card formatting complete] is displayed.
Press the [ ] button.
• Formatting or erasing data on a memory card only changes le
management information on the card and does not erase the data
completely. When transferring or disposing of memory cards, take
steps to protect personal information if necessary, as by physically
destroying cards.
105
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
• The total card capacity indicated on the formatting screen may be less than
the advertised capacity.
Low-Level Formatting
Perform low-level formatting in the following cases: [Memory card error] is
displayed, the camera is not working correctly, card image reading/writing is
slower, continuous shooting is slower, or movie recording suddenly stops.
Low-level formatting erases all data on a memory card. Before low-level
formatting, copy images on the memory card to a computer, or take other
steps to back them up.
On the screen in step 2 of “Formatting
Memory Cards” (=
104), press the
[][ ] buttons to choose [Low Level
Format], and then press the [ ][ ]
buttons to select this option. A [ ] icon is
displayed.
Follow steps 2 – 3 in “Formatting Memory
Cards” (=
104) to continue with the
formatting process.
• Low-level formatting takes longer than “Formatting Memory Cards” (=
104),
because data is erased from all storage regions of the memory card.
• You can cancel low-level formatting in progress by choosing [Stop]. In this
case, all data will be erased, but the memory card can be used normally.
File Numbering
Your shots are automatically numbered in sequential order (0001 – 9999) and
saved in folders that store up to 2,000 images each. You can change how the
camera assigns le numbers.
Choose [File Numbering], and then
choose an option.
Continuous Images are numbered consecutively (until the 9999th shot is taken/
saved) even if you switch memory cards.
Auto Reset Image numbering is reset to 0001 if you switch memory cards,
or when a new folder is created.
• Regardless of the option selected in this setting, shots may be numbered
consecutively after the last number of existing images on newly inserted
memory cards. To start saving shots from 0001, use an empty (or formatted,
=
104) memory card.
106
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Checking Certication Logos
Some logos for certication requirements met by the camera can be viewed
on the screen. Other certication logos are printed in this guide, on the
camera packaging, or on the camera body.
Choose [Certication Logo Display], and
then press the [ ] button.
Display Language
Change the display language as needed.
Choose [Language ], and then press
the [ ] button.
Press the [ ][ ][ ][ ] buttons to choose
a language, and then press the [ ]
button.
• You can also access the [Language] screen in Playback mode by pressing and
holding the [ ] button and immediately pressing the [ ] button.
Date-Based Image Storage
Instead of saving images in folders created each month, you can have the
camera create folders each day you shoot to store shots taken that day.
Choose [Create Folder], and then choose
[Daily].
Images will now be saved in folders
created on the shooting date.
Metric / Non-Metric Display
Change the unit of measurement shown in GPS elevation information
(=
95), the zoom bar (=
26), and elsewhere from m/cm to ft/in as
needed.
Choose [Units], and then choose [ft/in].
107
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Adjusting Other Settings
The following settings can also be adjusted on the [ ] tab.
• [Video System] (=
112)
• [Wireless settings] (=
70)
Restoring Default Camera Settings
If you accidentally change a setting, you can restore default camera
settings.
1 Access the [Reset All] screen.
Choose [Reset All], and then press the
[] button.
2 Restore default settings.
Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
Default settings are now restored.
• The following functions are not restored to default settings.
- [] tab settings [Date/Time] (=
101), [Time Zone] (=
102),
[Language ] (=
106), and [Video System] (=
112)
- Custom white balance data you have recorded (=
48)
- Shooting mode (=
38)
108
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Accessories
Enjoy the camera in more ways with optional Canon accessories and other compatible accessories sold separately
System Map .................................................... 109
Optional Accessories..................................... 110
Power Supplies ................................................... 110
Flash Unit ............................................................ 110
Other Accessories ............................................... 110
Printers ................................................................ 110
Photo and Movie Storage .....................................111
Using Optional Accessories...........................111
Playback on a TV .................................................111
Using the Software ......................................... 112
Checking Your Computer Environment ............... 112
Installing the Software ......................................... 113
Saving Images to a Computer ............................. 113
Printing Images .............................................. 115
Easy Print ............................................................ 115
Conguring Print Settings ................................... 116
Printing Movie Scenes ........................................ 118
Adding Images to the Print List (DPOF) .............. 119
Adding Images to a Photobook ........................... 121
109
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Use of genuine Canon accessories is recommended.
This product is designed to achieve excellent performance when used with genuine
Canon accessories.
Canon shall not be liable for any damage to this product and/or accidents such as re,
etc., caused by the malfunction of non-genuine Canon accessories (e.g., a leakage
and/or explosion of a battery pack). Please note that any repairs your Canon product
may require as a result of such malfunction are not covered under warranty and will
incur a fee.
System Map
AV Cable AVC-DC400
Wrist Strap Battery Pack
NB-11L
Battery Charger
CB-2LF/CB-2LFE*1
USB Cable (camera end: Mini-B)*2
Memory Card Card Reader Computer
TV/Video
System
Connect Station
CS100
Included Accessories
Cables
Flash Unit
PictBridge-Compatible Printers
High-Power Flash
HF-DC2
*1 Also available for purchase separately.
*2 A genuine Canon accessory is also available (Interface Cable IFC-400PCU).
110
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Optional Accessories
The following camera accessories are sold separately. Note that availability
varies by area, and some accessories may no longer be available.
Power Supplies
Battery Pack NB-11LH
Rechargeable lithium-ion battery
Battery Charger CB-2LF/CB-2LFE
Charger for Battery Pack NB-11LH and
NB-11L.
• The battery pack includes a convenient cover which you can attach to know
the charge status at a glance. Attach the cover so that is visible on a
charged battery pack, and attach it so that is not visible on an uncharged
battery pack.
• Battery Pack NB-11L is also supported.
• Battery Charger CB-2LD is also supported.
• The battery charger can be used in areas with 100 – 240 V AC
power (50/60 Hz).
• For power outlets in a dierent format, use a commercially available
adapter for the plug. Never use an electrical transformer designed
for traveling, which may damage the battery pack.
Flash Unit
High-Power Flash HF-DC2
External ash for illuminating subjects
that are out of range of the built-in ash.
Other Accessories
Interface Cable IFC-400PCU
For connecting the camera to a computer
or printer.
AV Cable AVC-DC400
Connect the camera to a TV to enjoy
playback on the larger TV screen.
Printers
Canon-Brand PictBridge-
Compatible Printers
Even without using a computer, you can
print images by connecting the camera
directly to a printer.
For details, visit your nearest Canon
retailer.
111
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Photo and Movie Storage
Connect Station CS100
A media hub for storing camera images,
viewing on a connected TV, printing
wirelessly on a Wi-Fi-compatible printer,
sharing over the Internet, and more.
Still Images Movies
Using Optional Accessories
Still Images Movies
Playback on a TV
Connecting the camera to a TV with the AV Cable AVC-DC400 (sold
separately) enables you to view your shots on the larger screen of the TV
as you control the camera.
For details on connection or how to switch inputs, refer to the TV manual.
• Some information may not be displayed when viewing images on a TV
(=
131).
1 Make sure the camera and TV
are o.
2 Connect the camera to the TV.
On the TV, insert the cable plugs fully into
the video inputs as shown.
On the camera, open the terminal cover
and insert the cable plug fully into the
camera terminal.
Black or white
Yellow
Yellow
Black
112
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
3 Turn the TV on and switch to
video input.
Switch the TV input to the video input you
connected the cable to in step 2.
4 Turn the camera on.
Press the [ ] button to turn the camera
on.
Images from the camera are now
displayed on the TV. (Nothing is
displayed on the camera screen.)
When nished, turn o the camera and
TV before disconnecting the cable.
• Correct display is not possible unless the camera video output
format (NTSC or PAL) matches the TV format. To change the video
output format, press the [ ] button and choose [Video System]
on the [ ] tab.
Using the Software
To utilize the features of the following software, download the software from
the Canon website and install it on your computer.
• CameraWindow
- Import images to your computer
• Image Transfer Utility
- Set up Image Sync (=
93) and receive images
• Map Utility
- Use a map to view GPS information that has been added to images
• To view and edit images on a computer, use preinstalled or
commonly available software compatible with images captured by
the camera.
Checking Your Computer Environment
For detailed software system requirements and compatibility information
(including support in new operating systems), visit the Canon website.
113
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Installing the Software
Install the software as described in steps 1 – 2 of “Installing
CameraWindow” (=
78).
Saving Images to a Computer
Using a USB cable (sold separately; camera end: Mini-B), you can connect
the camera to the computer and save images to the computer.
1 Connect the camera to the
computer.
With the camera turned o, open the
cover ( ). With the smaller plug of the
USB cable in the orientation shown,
insert the plug fully into the camera
terminal ( ).
Insert the larger plug of the USB cable
in the computer’s USB port. For details
about USB connections on the computer,
refer to the computer user manual.
2 Turn the camera on to access
CameraWindow.
Press the [ ] button to turn the camera
on.
Mac OS: CameraWindow is displayed
when a connection is established
between the camera and computer.
Windows: Follow the steps introduced
below.
In the screen that is displayed, click the
change program link of [ ].
Choose [Downloads Images From Canon
Camera] and then click [OK].
Double-click [ ].
114
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
3 Save the images to the
computer.
Click [Import Images from Camera], and
then click [Import Untransferred Images].
Images are now saved to the Pictures
folder on the computer, in separate
folders named by date.
After images are saved, close
CameraWindow, press the [ ] button to
turn the camera o, and unplug the cable.
To view images you save to a computer,
use preinstalled or commonly available
software compatible with images
captured by the camera.
• Windows 7: If the screen in step 2 is not displayed, click the [ ] icon in the
taskbar.
• Mac OS: If CameraWindow is not displayed after step 2, click the
[CameraWindow] icon in the Dock.
• Although you can save images to a computer simply by connecting your
camera to the computer without using the software, the following limitations
apply.
- It may take a few minutes after you connect the camera to the computer until
camera images are accessible.
- Images shot in vertical orientation may be saved in horizontal orientation.
- Image protection settings may be cleared from images saved to a computer.
- Some problems may occur when saving images or image information,
depending on the operating system version, the software in use, or image
le sizes.
115
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Still Images Movies
Printing Images
Your shots can easily be printed by connecting the camera to a printer.
On the camera, you can specify images to set up batch printing, prepare
orders for photo development services, and prepare orders or print images
for photobooks.
A Canon SELPHY CP series compact photo printer is used here for the
sake of illustration. Screens displayed and available functions vary by
printer. Also refer to the printer manual for additional information.
Still Images
Easy Print
Easily print your shots by connecting the camera to a PictBridge-compatible
printer (sold separately) with the USB cable.
1 Make sure the camera and
printer are o.
2 Connect the camera to the
printer.
Open the terminal cover. Holding the
smaller cable plug in the orientation
shown, insert the plug fully into the
camera terminal.
Connect the larger cable plug to the
printer. For other connection details,
refer to the printer manual.
3 Turn the printer on.
4 Turn the camera on.
Press the [ ] button to turn the camera
on.
5 Choose an image.
Press the [ ][ ] buttons to choose an
image.
6 Access the printing screen.
Press the [ ] button, choose [ ],
and press the [ ] button again.
7 Print the image.
Press the [ ][ ] buttons to choose
[Print], and then press the [ ] button.
Printing now begins.
To print other images, repeat the above
procedures starting from step 5 after
printing is nished.
When you are nished printing, turn the
camera and printer o and disconnect
the cable.
• For Canon-brand PictBridge-compatible printers (sold separately), see
“Printers” (=
110).
116
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Still Images
Conguring Print Settings
1 Access the printing screen.
Follow steps 1 – 6 in “Easy Print”
(=
115) to access the screen at left.
2 Congure the settings.
Press the [ ][ ] buttons to choose an
item, and then press the [ ][ ] buttons to
choose an option.
Default Matches current printer settings.
Date Prints images with the date added.
File No. Prints images with the le number added.
Both Prints images with both the date and le number added.
O –
Default Matches current printer settings.
O –
On Uses information from the time of shooting to print under
optimal settings.
Red-Eye 1 Corrects red-eye.
No. of Copies Choose the number of copies to print.
Cropping –Specify a desired image area to print (=
116).
Paper
Settings –Specify the paper size, layout, and other details
(=
117).
Still Images
Cropping Images before Printing
By cropping images before printing, you can print a desired image area
instead of the entire image.
1 Choose [Cropping].
After following step 1 in “Conguring Print
Settings” (=
116) to access the printing
screen, choose [Cropping] and press the
[] button.
A cropping frame is now displayed,
indicating the image area to print.
2 Adjust the cropping frame as
needed.
To resize the frame, move the zoom
lever.
To move the frame, press the
[][ ][ ][ ] buttons.
To rotate the frame, press the [ ] button.
Press the [ ] button, press the
[][ ] buttons to choose [OK], and then
press the [ ] button.
3 Print the image.
Follow step 7 in “Easy Print” (=
115)
to print.
• Cropping may not be possible at small image sizes, or at some
aspect ratios.
• Dates may not be printed correctly if you crop images shot with date
stamping congured.
117
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Still Images
Choosing Paper Size and Layout before Printing
1 Choose [Paper Settings].
After following step 1 in “Conguring Print
Settings” (=
116) to access the printing
screen, choose [Paper Settings] and
press the [ ] button.
2 Choose a paper size.
Press the [ ][ ] buttons to choose an
option, and then press the [ ] button.
3 Choose a type of paper.
Press the [ ][ ] buttons to choose an
option, and then press the [ ] button.
4 Choose a layout.
Press the [ ][ ] buttons to choose an
option.
When choosing [N-up], press the [ ][ ]
buttons to specify the number of images
per sheet.
Press the [ ] button.
5 Print the image.
118
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Available Layout Options
Default Matches current printer settings.
Bordered Prints with blank space around the image.
Borderless Borderless, edge-to-edge printing.
N-up Choose how many images to print per sheet.
ID Photo Prints images for identication purposes.
Only available for images with a recording pixel setting of L.
Fixed Size Choose the print size.
Choose from 3.5 x 5 in., postcard, or wide-format prints.
Still Images
Printing ID Photos
1 Choose [ID Photo].
Following steps 1 – 4 in “Choosing
Paper Size and Layout before Printing”
(=
117), choose [ID Photo] and press
the [ ] button.
2 Choose the long and short side
length.
Press the [ ][ ] buttons to choose an
item. Choose the length by pressing the
[][ ] buttons, and then press the [ ]
button.
3 Choose the printing area.
Follow step 2 in “Cropping Images before
Printing” (=
116) to choose the printing
area.
4 Print the image.
Movies
Printing Movie Scenes
1 Access the printing screen.
Follow steps 1 – 6 in “Easy Print”
(=
115) to choose a movie. The screen
at left is displayed.
2 Choose a printing method.
Press the [ ][ ] buttons to choose [ ],
and then press the [ ][ ] buttons to
choose the printing method.
3 Print the image.
119
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Movie Printing Options
Single Prints the current scene as a still image.
Sequence
Prints a series of scenes, a certain interval apart, on a single sheet of
paper. You can also print the folder number, le number, and elapsed
time for the frame by setting [Caption] to [On].
• To cancel printing in progress, press the [ ] button, choose [OK], and then
press the [ ] button again.
• After displaying a scene to print as described in steps 2 – 5 of “Viewing”
(=
57), you can also access the screen in step 1 here by pressing the
[][ ] buttons to choose [ ] in the movie control panel and then pressing the
[] button.
Still Images
Adding Images to the Print List (DPOF)
Batch printing (=
121) and ordering prints from a photo development
service can be set up on the camera. Choose up to 998 images on a
memory card and congure relevant settings, such as the number of copies,
as follows. The printing information you prepare this way will conform to
DPOF (Digital Print Order Format) standards.
Still Images
Conguring Print Settings
Specify the printing format, whether to add the date or le number, and
other settings as follows. These settings apply to all images in the print list.
Press the [ ] button, and then
choose [Print Settings] on the [ ] tab.
Choose and congure items as desired
(=
23).
Print Type
Standard One image is printed per sheet.
Index Smaller versions of multiple images are printed
per sheet.
Both Both standard and index formats are printed.
Date On Images are printed with the shooting date.
O –
File No. On Images are printed with the le number.
O –
Clear DPOF
data
On All image print list settings are cleared after
printing.
O –
• Not all of your DPOF settings may be applied in printing by the
printer or photo development service, in some cases.
• [ ] may be displayed on the camera to warn you that the memory
card has print settings that were congured on another camera.
Changing the print settings using this camera may overwrite all
previous settings.
• Setting [Date] to [On] may cause some printers to print the date
twice.
• Specifying [Index] will prevent you from choosing [On] for both [Date] and
[File No.] at the same time.
• Index printing is not available on some Canon-brand PictBridge-compatible
printers (sold separately).
• The date is printed in a format matching setting details in [Date/Time] on the
[] tab (=
12).
120
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Still Images
Setting Up Printing for Individual Images
1 Choose [Select Images & Qty.].
Press the [ ] button, choose
[Select Images & Qty.] on the [ ] tab,
and then press the [ ] button.
2 Choose an image.
Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
You can now specify the number of
copies.
If you specify index printing for the image,
it is labeled with a [ ] icon. To cancel
index printing for the image, press
the [ ] button again. [ ] is no longer
displayed.
3 Specify the number of prints.
Press the [ ][ ] buttons to specify the
number of prints (up to 99).
To set up printing for other images and
specify the number of prints, repeat
steps 2 – 3.
Printing quantity cannot be specied for
index prints. You can only choose which
images to print, by following step 2.
When nished, press the [ ] button
to return to the menu screen.
Still Images
Setting Up Printing for a Range of Images
Following step 1 in “Setting Up Printing
for Individual Images” (=
120), choose
[Select Range] and press the [ ] button.
Follow steps 2 – 3 in “Selecting a Range”
(=
62) to specify images.
Press the [ ][ ] buttons to choose
[Order], and then press the [ ] button.
Still Images
Setting Up Printing for All Images
Following step 1 in “Setting Up Printing
for Individual Images” (=
120), choose
[Select All Images] and press the [ ]
button.
Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
Still Images
Clearing All Images from the Print List
Following step 1 in “Setting Up Printing
for Individual Images” (=
120), choose
[Clear All Selections] and press the [ ]
button.
Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
121
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Still Images
Printing Images Added to the Print List (DPOF)
When images have been added to the
print list (
=
119 – 120), the screen
at left is displayed after you connect the
camera to a PictBridge-compatible printer.
Press the [ ][ ] buttons to choose [Print
now], and then simply press the [ ]
button to print the images in the print list.
Any DPOF print job that you temporarily
stop will be resumed from the next image.
Still Images
Adding Images to a Photobook
Photobooks can be set up on the camera by choosing up to 998 images on
a memory card and transferring them into the software on your computer,
where they are stored in their own folder. This is convenient when ordering
printed photobooks online or printing photobooks with your own printer.
Choosing a Selection Method
Press the [ ] button, choose
[Photobook Set-up] on the [ ] tab, and
then choose how you will select images.
• [] may be displayed on the camera to warn you that the memory
card has print settings that were congured on another camera.
Changing the print settings using this camera may overwrite all
previous settings.
Still Images
Adding Images Individually
1 Choose [Select].
Following the procedure in “Choosing
a Selection Method” (=
121), choose
[Select] and press the [ ] button.
2 Choose an image.
Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
[ ] is displayed.
To remove the image from the photobook,
press the [ ] button again. [ ] is no
longer displayed.
Repeat this process to specify other
images.
When nished, press the [ ] button
to return to the menu screen.
Still Images
Adding All Images to a Photobook
Following the procedure in “Choosing
a Selection Method” (=
121), choose
[Select All Images] and press the [ ]
button.
Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
122
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Still Images
Removing All Images from a Photobook
Following the procedure in “Choosing
a Selection Method” (=
121), choose
[Clear All Selections] and press the [ ]
button.
Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
123
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Appendix
Helpful information when using the camera
Troubleshooting ............................................. 124
On-Screen Messages ..................................... 127
On-Screen Information .................................. 130
Shooting (Information Display) ............................ 130
Playback (Detailed Information Display) ............. 131
Functions and Menu Tables .......................... 132
Functions Available in Each Shooting Mode ....... 132
FUNC. Menu .......................................................133
Shooting Tab ................................................. 135
Set Up Tab ..................................................... 137
Playback Tab ................................................. 137
Print Tab ........................................................ 137
Playback Mode FUNC. Menu .............................. 137
Handling Precautions .................................... 138
Specications ................................................. 138
124
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Troubleshooting
If you think there is a problem with the camera, rst check the following.
If the items below do not solve your problem, contact a Canon Customer
Support Help Desk.
Power
Nothing happens when the ON/OFF button is pressed.
• Conrm that the battery pack is charged (=
10).
• Conrm that the battery pack is inserted facing the correct way (=
11).
• Conrm that the memory card/battery cover is fully closed (=
11).
• Dirty battery terminals reduce battery performance. Try cleaning the terminals with a
cotton swab and reinserting the battery pack a few times.
The battery pack runs out of power quickly.
• Battery performance decreases at low temperatures. Try warming the battery pack a
little by putting it in your pocket, for example, ensuring that the terminals do not touch
any metal objects.
• If these measures do not help and the battery pack still runs out of power soon after
charging, it has reached the end of its life. Purchase a new battery pack.
The lens is not retracted.
• Do not open the memory card/battery cover while the camera is on. Close the cover,
turn the camera on, and then turn it o again (=
11).
The battery pack is swollen.
• Battery swelling is normal and does not pose any safety concerns. However, if battery
swelling prevents the battery pack from tting in the camera, contact a Canon Customer
Support Help Desk.
Display on a TV
Camera images look distorted or are not displayed on a TV (=
112).
Shooting
Cannot shoot.
• In Playback mode (=
56), press the shutter button halfway (=
21).
Strange display on the screen under low light (=
21).
Strange display on the screen when shooting.
Note that the following display problems are not recorded in still images but are
recorded in movies.
• The screen may darken under bright light.
• The screen may icker under uorescent or LED lighting.
• Purplish banding may appear on the screen if you compose a shot that includes a
bright light source.
No date stamp is added to images.
• By itself, the [Date/Time] setting (=
12) does not add date stamps to images.
Congure the [Date Stamp] setting (=
31).
• Date stamps are not added in shooting modes (=
132) in which date stamping
cannot be congured (=
31).
[] ashes on the screen when the shutter button is pressed, and
shooting is not possible (=
28).
[ ] is displayed when the shutter button is pressed halfway (=
28).
• Set the ash mode to [ ] (=
52).
• Increase the ISO speed (=
46).
• Mount the camera on a tripod or take other measures to keep it still.
• Set [IS Mode] to [Continuous] (=
54). However, you should set [IS Mode] to [O]
when using a tripod or other means to secure the camera (=
54).
Shots are out of focus.
• Press the shutter button halfway to focus on subjects before pressing it all the way
down to shoot (=
21).
• Make sure subjects are within focusing range (=
138).
• Set [Lamp Setting] to [On] (=
36).
• Conrm that unneeded functions such as macro are deactivated.
• Try shooting with focus lock (=
50).
125
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
No AF frames are displayed and the camera does not focus when the
shutter button is pressed halfway.
• To have AF frames displayed and the camera focus correctly, try composing the
shot with higher-contrast subject areas centered before you press the shutter button
halfway. Otherwise, try pressing the shutter button halfway repeatedly.
Subjects in shots look too dark.
• Set the ash mode to [ ] (=
52).
• Adjust brightness by using exposure compensation (=
45).
• Adjust contrast by using i-Contrast (=
47, 68).
• Use spot metering (=
46).
Subjects look too bright, highlights are washed-out.
• Set the ash mode to [ ] (=
34).
• Adjust brightness by using exposure compensation (=
45).
• Use spot metering (=
46).
• Reduce the lighting on subjects.
Shots look too dark despite the ash ring (=
28).
• Shoot within ash range (=
139).
• Increase the ISO speed (=
46).
Subjects in ash shots look too bright, highlights are washed-out.
• Shoot within ash range (=
139).
• Set the ash mode to [ ] (=
34).
White spots appear in ash shots.
• This is caused by light from the ash reecting o dust or airborne particles.
Shots look grainy.
• Lower the ISO speed (=
46).
• High ISO speeds in some shooting modes may cause grainy images (=
46).
Subjects are aected by red-eye.
• Set [Lamp Setting] to [On] (=
36) to light the red-eye reduction lamp (=
3) for
ash shots. Note that while the red-eye reduction lamp is lit (for about one second),
it is not possible to shoot, because the lamp is counteracting red-eye. For best
results, have subjects look at the red-eye reduction lamp. Also try increasing the
lighting in indoor scenes and shooting at closer range.
• Edit images using red-eye correction (=
69).
Recording to the memory card takes too long, or continuous shooting
is slower.
• Use the camera to perform low-level formatting of the memory card (=
105).
Shooting settings or FUNC. menu settings are not available.
• Available setting items vary by shooting mode. Refer to “Functions Available in Each
Shooting Mode”, “FUNC. Menu”, and “Shooting Tab” (=
132 – 135).
Shooting Movies
The elapsed time shown is incorrect, or recording is interrupted.
• Use the camera to format the memory card, or switch to a card that supports high-
speed recording. Note that even if the elapsed time display is incorrect, the length
of movies on the memory card corresponds to the actual recording time (=
104,
=
139).
[ ] is displayed and shooting stops automatically.
The camera’s internal memory buer lled up as the camera could not record to the
memory card quickly enough. Try one of the following measures.
• Use the camera to perform low-level formatting of the memory card (=
105).
• Lower the image quality (=
35).
• Switch to a memory card that supports high-speed recording (=
139).
Playback
Playback is not possible.
• Image or movie playback may not be possible if a computer is used to rename les or
alter the folder structure.
126
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Playback stops, or audio skips.
• Switch to a memory card that you have performed low-level formatting on with the
camera (=
105).
• There may be brief interruptions when playing movies copied to memory cards that
have slow read speeds.
• When movies are played on a computer, frames may be dropped and audio may skip
if computer performance is inadequate.
Sound is not played during movies.
• Adjust the volume (=
57) if you have activated [Mute] (=
101) or the sound in
the movie is faint.
Memory Card
The memory card is not recognized.
• Restart the camera, with the memory card in it (=
20).
Computer
Cannot transfer images to a computer.
When attempting to transfer images to the computer via a cable, try reducing the
transfer speed as follows.
• Press the [ ] button to enter Playback mode. Hold the [ ] button down as
you press the [ ] and [ ] buttons at the same time. On the next screen, press the
[][ ] buttons to choose [B], and then press the [ ] button.
Wi-Fi
Cannot access the Wi-Fi menu by pressing the [ ] button.
• The Wi-Fi menu cannot be accessed while the camera is connected to a printer or
computer via a cable. Disconnect the cable.
Cannot add a device/destination.
• A total of 20 items of connection information can be added to the camera.
Erase unneeded connection information from the camera rst, and then add new
devices/destinations (=
97).
• Use a computer or smartphone to register Web services (=
83).
• To add a smartphone, rst install the dedicated application Camera Connect on your
smartphone (=
71).
• To add a computer, rst install the software CameraWindow on your computer.
Also check your computer and Wi-Fi environment and settings (=
78, 79).
• Do not use the camera near sources of Wi-Fi signal interference, such as microwave
ovens, Bluetooth devices, or other equipment operating on the 2.4 GHz band.
• Bring the camera closer to the other device you are trying to connect to (such as the
access point), and make sure there are no objects between the devices.
Cannot connect to the access point.
• Conrm that the access point channel is set to a channel supported by the camera
(=
140). Note that instead of auto channel assignment, it is advisable to specify a
supported channel manually.
Cannot send images.
• The destination device has insucient storage space. Increase the storage space on
the destination device and resend the images.
• The write-protect switch of the memory card in the destination camera is set to the
locked position. Slide the write-protect switch to the unlocked position.
• Images cannot be sent to CANON iMAGE GATEWAY or other Web services if you
move or rename image les or folders on the computer that received images sent
using Image Sync via an access point (=
93). Before moving or renaming these
image les or folders on the computer, make sure the images have already been sent
to CANON iMAGE GATEWAY or other Web services.
Cannot resize images for sending.
• Images cannot be resized to be bigger than the recording pixel setting of their original
size.
• Movies cannot be resized.
127
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Images take a long time to send./The wireless connection is disrupted.
• Multiple images may take a long time to send. Try resizing the image to reduce
sending time (=
92).
• Movies may take a long time to send.
• Do not use the camera near sources of Wi-Fi signal interference, such as microwave
ovens, Bluetooth devices, or other equipment operating on the 2.4 GHz band.
Note that images may take a long time to send even when [ ] is displayed.
• Bring the camera closer to the other device you are trying to connect to (such as the
access point), and make sure there are no objects between the devices.
No notication message is received on a computer or smartphone
after adding CANON iMAGE GATEWAY to the camera.
• Make sure the email address you entered is correct, and try adding the destination
again.
• Check the email settings on the computer or smartphone. If they are congured to
block email from certain domains, you may not be able to receive the notication
message.
Want to erase Wi-Fi connection information before disposing of the
camera or giving it to someone else.
• Reset the Wi-Fi settings (=
98).
On-Screen Messages
If an error message is displayed, respond as follows.
Shooting or Playback
No memory card
• The memory card may be inserted facing the wrong way. Reinsert the memory card
facing the correct way (=
11).
Memory card locked
• The write-protect switch of the memory card is set to the locked position. Switch the
write-protect switch to the unlocked position (=
11).
Cannot record!
• Shooting was attempted without a memory card in the camera. To shoot, insert a
memory card facing the correct way (=
11).
Memory card error (=
105)
• If the same error message is displayed even after you have formatted a supported
memory card (=
2) and have inserted it facing the correct way (=
11), contact
a Canon Customer Support Help Desk.
Insucient space on card
• There is not enough free space on the memory card to shoot (=
25, 37, 44)
or edit images (=
68 – 69). Either erase unneeded images (=
64) or insert a
memory card with enough free space (=
11).
Charge the battery (=
10)
No Image.
• The memory card does not contain any images that can be displayed.
Protected! (=
61)
Unidentied Image/Incompatible JPEG/Image too large./Cannot play
back MOV/Cannot play back MP4
• Unsupported or corrupt images cannot be displayed.
• It may not be possible to display images that were edited or renamed on a computer,
or images shot with another camera.
128
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Cannot magnify!/Cannot rotate/Cannot modify image/Cannot modify/
Unselectable image.
• The following functions may be unavailable for images that were renamed or already
edited on a computer, or images shot with another camera. Note that starred (*)
functions are not available for movies.
Magnify* (=
60), Rotate* (=
66), Edit* (=
68 – 69), Print List* (=
119),
and Photobook Set-up* (=
121).
Exceeded selection limit
• More than 998 images were selected for Print List (=
119) or Photobook Set-up
(=
121). Choose 998 images or less.
• Print List (=
119) or Photobook Set-up (=
121) settings could not be saved
correctly. Reduce the number of selected images and try again.
• You attempted to choose more than 500 images in Protect (=
61), Erase
(=
64), Favorites (=
67), Print List (=
119), or Photobook Set-up (=
121).
Naming error!
• The folder could not be created or images could not be recorded, because the highest
supported folder number (999) for storing images on the card has been reached and
the highest supported image number (9999) for images in folders has been reached.
On the [ ] tab, change [File Numbering] to [Auto Reset] (=
105), or format the
memory card (=
104).
Lens Error
• This error may occur if the lens is held while it is moving, or when the camera is used
in dusty or sandy locations.
• Frequent display of this error message may indicate camera damage. In this case,
contact a Canon Customer Support Help Desk.
A camera error was detected (error number)
• If this error message is displayed immediately after a shot, the image may not have
been saved. Switch to Playback mode to check for the image.
• Frequent display of this error message may indicate camera damage. In this case,
write down the error number (Exx) and contact a Canon Customer Support Help
Desk.
File Error
• Correct printing (=
115) may not be possible for photos from other cameras or
images that have been altered using computer software, even if the camera is
connected to the printer.
Print error
• Check the paper size setting (=
117). If this error message is displayed when the
setting is correct, restart the printer and complete the setting on the camera again.
Ink absorber full
• Contact a Canon Customer Support Help Desk to request assistance with ink
absorber replacement.
Wi-Fi
Connection failed
• No access points were recognized. Check the access point settings (=
79).
• A device could not be found. Turn the camera o and on again, and retry the
connection.
• Check the device you want to connect to and make sure it is ready for connection.
Cannot determine access point
• The WPS buttons on numerous access points were pressed simultaneously.
Try reconnecting again.
No access points found
• Check to make sure that the access point is turned on.
• When connecting to an access point manually, make sure that you entered the
correct SSID.
Incorrect password/Incorrect Wi-Fi security settings
• Check the access point security settings (=
79).
IP address conict
• Reset the IP address so that it does not conict with another.
129
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Disconnected/Receiving failed/Sending failed
• You may be in an environment where Wi-Fi signals are obstructed.
• Avoid using the camera’s Wi-Fi function around microwave ovens, Bluetooth devices,
and other devices that operate on the 2.4 GHz band.
• Bring the camera closer to the other device you are trying to connect to (such as the
access point), and make sure there are no objects between the devices.
• Check the connected device to make sure it is not experiencing errors.
Sending failed
Memory card error
• If the same error message is displayed even when you have inserted a formatted
memory card facing the correct way, contact a Canon Customer Support Help Desk.
Receiving failed
Insucient space on card
• There is not enough free space on the memory card in the target camera to receive
images. Erase images to create space on the memory card, or insert a memory card
with sucient space.
Receiving failed
Memory card locked
• The write-protect switch of the memory card in the camera to receive the images is
set to the locked position. Slide the write-protect switch to the unlocked position.
Receiving failed
Naming error!
• When the highest folder number (999), and the highest image number (9999) have
been reached on the receiving camera, images cannot be received.
Insucient space on server
• Delete unnecessary images uploaded to CANON iMAGE GATEWAY to create space.
• Save the images sent via Image Sync (=
93) to your computer.
Check network settings
• Check to make sure your computer can connect to the Internet with the current
network settings.
130
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
On-Screen Information
Shooting (Information Display)
Battery level
(=
130)
White balance
(=
47)
Drive mode
(=
34)
Eco mode (=
102)
Self-timer (=
32)
Camera shake
warning (=
28)
Metering method
(=
46)
Recording pixel
setting (=
35)
Recordable shots
(=
139)
Movie quality
(=
35)
Remaining time
(=
139)
Digital zoom
magnication
(=
30)
AF frame (=
49),
Spot AE point frame
(=
46)
Focus range
(=
48, 49)
IS mode icon
(=
29)
Shooting mode
(=
132), Scene
icon (=
29)
Flash mode
(=
34, 52)
Date stamp
(=
31)
ISO speed (=
46)
i-Contrast (=
47)
Grid lines (=
53)
AE lock (=
45)
Shutter speed
Aperture value
Exposure
compensation level
(=
45)
Zoom bar (=
26)
Time zone (=
102)
Image stabilization
(=
54)
Battery Level
An on-screen icon or message indicates the battery charge level.
Display Details
Sucient charge
Slightly depleted, but sucient
(Blinking red) Nearly depleted—charge the battery pack soon
[Charge the battery] Depleted—charge the battery pack immediately
131
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Playback (Detailed Information Display)
Movies
(=
26, 57)
Shooting mode
(=
132)
ISO speed
(=
46), Playback
speed (=
40)
Exposure
compensation level
(=
45)
White balance
(=
47)
Histogram (=
58)
Image editing
(=
68 – 69)
Recording pixel
setting (=
35),
MP4 (movies)
Image Sync
(=
93)
Battery level
(=
130)
Metering method
(=
46)
Folder number – File
number (=
105)
Current image no. /
Total no. of images
Shutter speed (still
images), Image
quality / Frame rate
(movies) (=
35)
Aperture value
Flash (=
52)
Focus range
(=
48, 49)
File size
Still images:
Recording pixel
setting (=
139)
Movies: Playback
time (=
139)
Protection (=
61)
Favorites (=
67)
Red-eye correction
(=
69)
i-Contrast
(=
47, 68)
Shooting date/time
(=
12)
• Some information may not be available when using a TV as the display
(=
111).
Summary of Movie Control Panel in “Viewing” (=
57)
Exit
Play
Slow Motion (Press the [ ][ ] buttons to adjust the playback speed. No sound
is played.)
Skip Backward* (To continue skipping backward, keep holding down the [ ]
button.)
Previous Frame (For fast-rewind, keep holding down the [ ] button.)
Next Frame (For fast-forward, keep holding down the [ ] button.)
Skip Forward* (To continue skipping forward, keep holding down the [ ]
button.)
Shown when the camera is connected to a PictBridge-compatible printer
(=
115).
* Displays the frame approx. 4 sec. before or after the current frame.
• To skip forward or back during movie playback, press the [ ][ ] buttons.
132
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Functions and Menu Tables
Functions Available in Each Shooting Mode
Shooting Mode
Function
Flash (=
34, 52)
OOOOOOOOOOO
– –
–
OOO
–
OOOOOO
–
O
*1
O
–––––––––––
OOOOOOOOOOOOO
Date Stamp (=
31)
O
OOOOOOOOOOOOO
Date / Date & Time
OOOO
–––––––
O O
Screen Display (=
21)
No Information Display
OOO
–
O
––––
OOOO
Information Display
OOOOOOOOOOOOO
*1 Not available, but switches to [ ] in some cases.
O
Available or set automatically.
– Not available.
133
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
FUNC. Menu
Shooting Mode
Function
Light Metering (=
46)
OOOOOOOOOOOOO
–
O
–––––––––––
White Balance (=
47)
OOOOOOOOOOOOO
–
O
–
O O
–––––––
O
ISO Speed (=
46)
AUTO
OOOOOOOOOOOO
–
100, 200, 400, 800, 1600 –
O
––––––––––
O
Exposure Compensation (=
45)–
OOOOOOOOO
–
O
–
Self-Timer (=
32)
OOOOOOOOOOOOO
OOO
–
OOOOOOOOO
Self-Timer Settings (=
33)
Delay*1
OOO
–
OOOOOOOOO
Shots*2
OOO
–
OOOOOOOOO
Focus Range (=
48, 49)
OOOOOOOOOOOOO
–
O O
–
OOOOOOO
–
O
Drive Mode (=
34)
OOOOOOOOOOOOO
OOO
–
OOOOOOOO
–
*1 Cannot be set to 0 seconds in modes without selection of the number of shots.
*2 One shot (cannot be modied) in modes without selection of the number of shots.
O
Available or set automatically. – Not available.
134
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Shooting Mode
Function
Recording Pixels (=
35)
OOOO
–
OOOOOOOO
OOOO
–––––––
O O
––––
O
––––––––
OOOO
– –
O
––––
O O
Movie Quality (=
35)
OOOOOO
*1
OOOOOO
*1 Synchronizes with the recording pixel setting and is automatically set (=
40).
O
Available or set automatically.
– Not available.
135
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Shooting Tab
Shooting Mode
Function
Easy Auto start (=
36)
Enable
OOOOOOOOOOOOO
Disable
OOOOOOOOOOOOO
AF Frame (=
49)
Face AiAF
OOOOO
– –
OOOO
–
O
Tracking AF –
O O
–
O
–––
OOO
–
O
Center –
O O
–
O O
–
OOOOOO
Digital Zoom (=
30, 53)
On
OOOO
–––––––
O O
O –
OOOOOOOOOOOO
Servo AF (=
50)
Enable –
O O
–
O
–––
OOO
– –
Disable *1
OOOOOOOOOOOO
Continuous AF (=
51)
Enable
OOOO
–
OOOOOO
–
O
Disable –
O O
–
OOOOOOOOO
Lamp Setting (=
36)
On
OOOOOOOOOOO
–
O
O
OOOOOOOOOOOOO
i-Contrast (=
47)
Auto
O O
– –
O
––––––––
O –
OOO
–
OOOOOOOO
Review image after shooting (=
53)
Display Time O/Quick/2 sec./4 sec./8 sec./Hold
OOOOOOOOOOOOO
Display Info O
OOOOOOOOOOOOO
Detailed –
OOOOOOOOOOOO
*1 [Enable] when subject movement is detected.
O
Available or set automatically.
– Not available.
136
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Shooting Mode
Function
Grid Lines (=
53)
On –
OOOOOOOOOOOO
O
OOOOOOOOOOOOO
IS Settings (=
54)
IS Mode O/Continuous
OOOOOOOOOOOOO
Shoot Only –
OOOOOOOOOOOO
Dynamic IS 1
OOOOOO
–
OOOOOO
2
OOOOOOOOOOOOO
Date Stamp (=
31)See “Functions Available in Each Shooting Mode” (=
132).
O
Available or set automatically. – Not available.
137
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Set Up Tab
Item Reference Page Item Reference Page
Mute =
101 Format =
104
Volume =
101 File Numbering =
105
Hints & Tips =
101 Create Folder =
106
Date/Time =
101 Units =
106
Time Zone =
102 Video System =
112
Lens Retraction =
102 Wi-Fi connect’n =
70
Eco Mode =
102 Wireless settings =
70
Power Saving =
20, 103 Certication Logo
Display =
106
Disp. Brightness =
104 Language =
14
Start-up Image =
104 Reset All =
107
Playback Tab
Item Reference Page Item Reference Page
Slideshow =
60 i-Contrast =
68
Erase =
64 Red-Eye Correction =
69
Protect =
61 Resize =
68
Rotate =
66 Transition =
57
Favorites =
67 Auto Rotate =
66
Photobook Set-up =
121 Resume =
57
Print Tab
Item Reference
Page Item Reference
Page
Print –Select All Images =
120
Select Images & Qty. =
120 Clear All Selections =
120
Select Range =
120 Print Settings =
119
Playback Mode FUNC. Menu
Item Reference
Page Item Reference
Page
Rotate =
66 Play Movie =
57
Protect =
61 Image Search =
59
Favorites =
67 Slideshow =
60
Print =
115
138
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Handling Precautions
• The camera is a high-precision electronic device. Avoid dropping it or
subjecting it to strong impact.
• Never bring the camera near magnets, motors, or other devices that
generate strong electromagnetic elds, which may cause malfunction or
erase image data.
• If water droplets or dirt adheres to the camera or screen, wipe with a dry
soft cloth, such as an eyeglass cloth. Do not rub hard or apply force.
• Never use cleaners containing organic solvents to clean the camera or
screen.
• Use a blower brush to remove dust from the lens. If cleaning is dicult,
contact a Canon Customer Support Help Desk.
• To prevent condensation from forming on the camera after sudden
temperature changes (when the camera is transferred from cold to warm
environments), put the camera in an airtight, resealable plastic bag and
let it gradually adjust to the temperature before removing it from the bag.
• If condensation does form on the camera, stop using it immediately.
Continuing to use the camera in this state may damage it. Remove
the battery pack and memory card, and wait until the moisture has
evaporated before resuming use.
• Store unused battery packs in a plastic bag or other container. To maintain
battery performance if you will not use the battery pack for some time,
about once a year charge it and then use the camera until it runs out of
power before storing the battery pack.
Specications
Image Sensor
Image size ...........................................1/2.3 type
Camera Eective Pixels
(Pixels may decrease
due to image processing.) .........................Approx. 20.0 megapixels
Total Pixels ..........................................Approx. 20.5 megapixels
Lens
Focal Length
(35mm lm equivalent) ............................. 4.3 – 43.0 mm (24 – 240 mm)
Zoom Magnication .............................10x
Shooting Range (measured from the tip of the lens)
Shooting
Mode Focus Range Maximum Wide Angle
()
Maximum Telephoto
( )
–1 cm (0.4 in.) ‒ innity 1.0 m (3.3 ft.) ‒ innity
Other than
the above
5 cm (2.0 in.) ‒ innity 1.0 m (3.3 ft.) ‒ innity
1 – 50 cm
(0.4 in. – 1.6 ft.) –
3.0 m (9.8 ft.) ‒ innity 3.0 m (9.8 ft.) ‒ innity
139
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Shutter
Shutter Speed
Auto Mode (automatic settings)
Max. Tv ............................................1 sec.
Min. Tv .............................................1/2000 sec.
Range in all shooting modes
Max. Tv ............................................15 sec.
Min. Tv .............................................1/2000 sec.
Available Tv values
Shooting mode ................................ Long Shutter mode
15, 13, 10, 8, 6, 5, 4, 3.2, 2.5, 2,
1.6, 1.3, 1
Aperture
F number
Wide angle ..........................................3.0 / 9.0
Telephoto ............................................. 6.9 / 20.0
Flash
Built-in Flash
Flash Range (Max. wide angle)
closest point ....................................50.0 cm (1.6 ft.)
farthest point ....................................4.0 m (13.1 ft.)
Flash Range (Telephoto end)
closest point ....................................1.0 m (3.3 ft.)
farthest point ....................................2.0 m (6.6 ft.)
Monitor
Type ......................................................... TFT color liquid crystal
Screen Size .............................................6.8 cm (2.7 in.)
Eective Pixels ........................................Approx. 230,000 dots
Shooting
Digital zoom
Magnication .......................................Approx. 4x
Maximum with Optical Zoom ...............Approx. 40x
Focal Length
(Telephoto end, 35mm lm equivalent) ........Approx. 960 mm equivalent
ZoomPlus
(Number of recording pixels L)...................Approx. 20x
Continuous Shooting
Shooting speed*
Auto/P Normal Continuous
Continuous shooting speed .........Max approx. 0.8 shots/sec.
Low light Mode
Continuous shooting speed .........Max approx. 2.2 shots/sec.
* Continuous shooting speed may become slower due to the following factors:
Tv value/Av value/Subject conditions/Lighting conditions/Use of ash/
Zoom position
Recording
File Format .............................................. DCF-compliant DPOF compatible
(Version 1.1)
Data Type
Still Images
Recording Format ............................Exif 2.3 (DCF 2.0)
Image ..............................................JPEG only
Movies
Recording Format ............................MP4
Video ...............................................MPEG-4 AVC/H.264
Audio ...............................................MPEG-4 AAC-LC (monaural)
140
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Recorded Pixels, Number of shots per a memory card
Still Image
Using a 16 GB memory card (approx. shots)
3017
10798
5925
16755
80988
4015
Movie
Using a 16 GB memory card
Pixels Recording
le size
Recordable Time per 16 GB
Memory Card (Approx.)
Single Clip Recording
Time (Approx.)
(1280 x 720) 1624 KB/sec. 2 hr. 35 min. 37 sec. 29 min. 59 sec.
(640 x 480) 450 KB/sec. 8 hr. 25 min. 48 sec. 1 hr.
• Continuous shooting is possible until the memory card becomes full or the recording
length for one movie reaches approx. 29 minutes 59 seconds.
Power
Battery Pack ............................................NB-11L
Number of Still Image Shots (CIPA compliant) Approx. 190 shots
Number of Still Image Shots (Eco Mode On) Approx. 245 shots
Movie Recording Time (CIPA compliant) Approx. 50 min.
Playback Time* Approx. 4 hr.
* Time when playing back a slideshow of still images.
Interface
Wired
Digital terminal
(Hi-Speed USB compliant) ........................ Mini-B
Analog Video Output (NTSC/PAL)
Analog Audio Output ...........................Monaural
Wireless
NFC ..................................................... NFC Forum Type 3/4 Tag
compliant (Dynamic)
Wi-Fi
Compliance standards .....................IEEE 802.11b/g/n
Transmission frequency
Frequency ...................................2.4 GHz
Channels .....................................1 – 11 ch
Security
Infrastructure mode ..................... WPA2-PSK (AES/TKIP),
WPA-PSK (AES/TKIP), WEP
* Wi-Fi Protected Setup compliant
Camera access point mode ........WPA2-PSK (AES)
Ad hoc mode ...............................WPA2-PSK (AES)
Operating Environment
Temperature ............................................ Min. 0 °C (32 °F),
Max. 40 °C (104 °F)
Dimensions (CIPA compliant)
W .............................................................95.3 mm (3.75 in.)
H ..............................................................56.8 mm (2.24 in.)
D ..............................................................23.6 mm (0.93 in.)
141
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Weight (CIPA compliant)
Camera Body Only ..................................Approx. 122 g (approx. 4.30 oz.)
Including Battery Pack, Memory Card ..... Approx. 137 g (approx. 4.83 oz.)
Battery Pack NB-11L
Type: Rechargeable lithium-ion battery
Nominal Voltage: 3.6 V DC
Nominal Capacity: 680 mAh
Charging Cycles: Approx. 300 times
Operating Temperatures: 0 – 40 °C (32 – 104 °F)
Battery Charger CB-2LF/CB-2LFE
Rated Input: 100 – 240 V AC (50/60 Hz)
Rated Output: 4.2 V DC, 0.41 A
Charging Time: Approx. 2 hours
Operating Temperatures: 5 – 40 °C (41 – 104 °F)
• Size, weight, and number of shots available are based on measurement guidelines of
the Camera & Imaging Products Association (CIPA).
• Under some shooting conditions, the number of shots and recording time may be less
than mentioned above.
• Number of shots/time with a fully charged battery pack.
142
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Indicator ......................................... 24, 36
Innity (focus range) ............................ 49
ISO speed............................................ 46
L
Long shutter (shooting mode).............. 43
Low light (shooting mode) ................... 38
M
Macro (focus range) ............................ 48
Magnied display ................................. 60
Memory cards ........................................ 2
Recording time ............................ 139
Menu
Basic operations ............................ 23
Table ............................................ 132
Metering method.................................. 46
Miniature eect (shooting mode) ......... 40
Monochrome (shooting mode)............. 41
Movies
Recording time ............................ 139
P
P (shooting mode) ............................... 45
Package contents .................................. 2
Photobook set-up .............................. 121
PictBridge ................................... 110, 115
Playback → Viewing
Portrait (shooting mode) ...................... 38
Poster eect (shooting mode) ............. 39
Power .................................................110
→ Battery pack
→ Battery charger
A
Accessories ........................................110
AE lock ................................................ 45
AF frames ............................................ 49
Auto mode (shooting mode) .......... 15, 26
AV cable ..................................... 110, 111
B
Batteries → Date/time (date/time battery)
Battery charger ...............................2, 110
Battery pack
Charging ........................................ 10
Eco mode .................................... 102
Level ............................................ 130
Power saving ................................. 20
C
Camera
Reset all ...................................... 107
Camera access point mode ................. 77
Camera Connect ................................. 71
CameraWindow ................................... 78
CANON iMAGE GATEWAY ........... 71, 83
Center (AF frame mode)...................... 50
Color (white balance)........................... 47
Connecting via an access point ........... 79
Continuous shooting ............................ 34
Cropping .............................................116
Custom white balance ......................... 48
D
Date/time
Adding date stamps ...................... 31
Changing ....................................... 13
Date/time battery ........................... 14
Settings ......................................... 12
World clock .................................. 102
Defaults → Reset all
Digital zoom ................................... 30, 53
Display language ................................. 14
DPOF ..................................................119
Drive mode .......................................... 34
E
Easy Auto ...................................... 15, 26
Eco mode .......................................... 102
Editing
i-Contrast ....................................... 68
Red-eye correction ........................ 69
Resizing images ............................ 68
Editing or erasing connection
information ........................................... 97
Erasing ................................................ 64
Error messages ................................. 127
Exposure
Compensation ............................... 45
Index F
Face AiAF (AF frame mode) ................ 49
Face self-timer (shooting mode) .......... 42
Favorites .............................................. 67
File numbering ................................... 105
Fireworks (shooting mode) .................. 38
Fish-eye eect (shooting mode) .......... 39
Flash
Deactivating ash .................... 34, 52
On ................................................. 52
Slow synchro ................................. 52
Focusing
AF frames ...................................... 49
Servo AF ....................................... 50
Focus lock ........................................... 50
Focus range
Innity ............................................ 49
Macro ............................................ 48
FUNC. menu
Basic operations ............................ 22
Table .................................... 133, 137
G
Grid lines ............................................. 53
I
i-Contrast ....................................... 47, 68
Images
Display period ............................... 53
Erasing .......................................... 64
Playback → Viewing
Protecting ...................................... 61
Image stabilization ............................... 54
Image Sync.......................................... 93
143
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
World clock ........................................ 102
Wrist strap → Strap
Z
Zoom ....................................... 15, 26, 30
Shooting
Shooting date/time → Date/time
Shooting information ................... 130
Slideshow ............................................ 60
Software
Installation ..............................78, 113
Saving images to
a computer .............................78, 113
Sounds .............................................. 101
Strap ................................................ 2, 10
Super vivid (shooting mode) ................ 39
T
Terminal ...................................... 111, 115
Toy camera eect (shooting mode) ..... 41
Tracking AF ......................................... 50
Traveling with the camera ................. 102
Troubleshooting ................................. 124
TV display ........................................... 111
V
Viewing .......................................... 17, 57
Image search ................................ 59
Index display ................................. 58
Magnied display .......................... 60
Single-image display ............... 17, 57
Slideshow ...................................... 60
TV display .................................... 111
W
White balance (color)........................... 47
Widescreen (recording pixel setting) ... 35
Wi-Fi functions ..................................... 70
Wi-Fi menu .......................................... 75
Power saving ....................................... 20
Printing ...............................................115
Program AE ......................................... 45
Protecting ............................................ 61
R
Recording pixels (image size) ............. 35
Red-eye correction .............................. 69
Remote live view shooting ................... 96
Reset all............................................. 107
Resizing images .................................. 68
Rotating ............................................... 66
S
Saving images to a computer .......78, 113
Screen
Display language ........................... 14
Icons .................................... 130, 131
Menu → FUNC. menu, Menu
SD/SDHC/SDXC memory cards
→ Memory cards
Searching ............................................ 59
Self-timer ............................................. 32
2-second self-timer ........................ 33
Sending images ................................... 90
Sending images to a computer ............ 78
Sending images to another camera..... 89
Sending images to a printer................. 87
Sending images to a smartphone ........ 71
Sending images to Web services ........ 83
Servo AF .............................................. 50
144
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Precautions for Wireless Features (Wi-Fi or Others)
• Countries and Regions Permitting Wireless Function Use
- Use of wireless functions is restricted in some countries and regions,
and illegal use may be punishable under national or local regulations.
To avoid violating wireless regulations, visit the Canon website to check
where use is allowed.
Note that Canon cannot be held liable for any problems arising from
wireless function use in other countries and regions.
• Doing any of the following may incur legal penalties:
- Altering or modifying the product
- Removing the certication labels from the product
• Before goods or technologies in the camera regulated by the Foreign
Exchange and Foreign Trade Act are exported (which includes bringing
them outside Japan or showing them to non-residents in Japan), export
or service transaction permission may be required from the Japanese
government.
• Because this product includes American encryption items, it falls under
U.S. Export Administration Regulations, and cannot be exported to or
brought into a country under U.S. trade embargo.
• Be sure to make notes of the Wi-Fi settings you use.
The wireless settings saved to this product may change or be erased due
to incorrect operation of the product, the eects of radio waves or static
electricity, or accident or malfunction.
Please note that Canon accepts no responsibility for direct or
indirect damages or loss of earnings resulting from a degradation or
disappearance of content.
• When transferring ownership, disposing of the product, or sending it for
repair, restore the default wireless settings by erasing any settings you
have entered.
• Canon will not make compensation for damages resulting from loss or
theft of the product.
Canon accepts no responsibility for damages or loss resulting from
unauthorized access or use of target devices registered on this product
due to loss or theft of the product.
• Do not use the wireless function of this product near medical equipment
or other electronic equipment.
Use of the wireless function near medical equipment or other electronic
equipment may aect operation of those devices.
Radio Wave Interference Precautions
• This product may receive interference from other devices that emit radio
waves. To avoid interference, be sure to use this product as far away as
possible from such devices, or avoid using the devices at the same time
as this product.
Security Precautions
Because Wi-Fi uses radio waves to transmit signals, security precautions
more stringent than when using a LAN cable are required.
Keep the following points in mind when using Wi-Fi.
• Only use networks you are authorized to use.
This product searches for Wi-Fi networks in the vicinity and displays the
results on the screen. Networks you are not authorized to use (unknown
networks) may also be displayed. However, attempting to connect to or
using such networks could be regarded as unauthorized access. Be sure
to use only networks you are authorized to use, and do not attempt to
connect to other unknown networks.
145
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Third-Party Software
• expat.h
Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd
Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation les (the “Software”),
to deal in the Software without restriction, including without limitation the
rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
sell copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included
in all copies or substantial portions of the Software. THE SOFTWARE IS
PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Personal Information and Security Precautions
If personal information and/or Wi-Fi security settings, such as passwords,
etc., are saved on the camera, please be aware that such information and
settings may still remain in the camera.
When transferring the camera to another person, disposing of it, or sending
it for repair, be sure to take the following measures to prevent the leakage
of such information and settings.
• Erase registered Wi-Fi security information by choosing [Reset Settings]
in the Wi-Fi settings.
If security settings have not been properly set, the following problems may
occur.
• Transmission monitoring
Third parties with malicious intent may monitor Wi-Fi transmissions and
attempt to acquire the data you are sending.
• Unauthorized network access
Third parties with malicious intent may gain unauthorized access to
the network you are using to steal, modify, or destroy information.
Additionally, you could fall victim to other types of unauthorized access
such as impersonation (where someone assumes an identity to gain
access to unauthorized information) or springboard attacks (where
someone gains unauthorized access to your network as a springboard to
cover their tracks when inltrating other systems).
To prevent these types of problems from occurring, be sure to thoroughly
secure your Wi-Fi network.
Only use this camera’s Wi-Fi function with a proper understanding of
Wi-Fi security, and balance risk and convenience when adjusting security
settings.
146
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Trademarks and Licensing
• Microsoft and Windows are trademarks or registered trademarks of
Microsoft Corporation in the United States and/or other countries.
• Macintosh and Mac OS are trademarks of Apple Inc., registered in the
U.S. and other countries.
• App Store, iPhone, and iPad are trademarks of Apple Inc.
• The SDXC logo is a trademark of SD-3C, LLC.
• Wi-Fi®, Wi-Fi Alliance®, WPA™, WPA2™ and Wi-Fi Protected Setup™
are trademarks or registered trademarks of the Wi-Fi Alliance.
• The N-Mark is a trademark or registered trademark of NFC Forum, Inc. in
the United States and in other countries.
• All other trademarks are the property of their respective owners.
• This device incorporates exFAT technology licensed from Microsoft.
• This product is licensed under AT&T patents for the MPEG-4 standard
and may be used for encoding MPEG-4 compliant video and/or decoding
MPEG-4 compliant video that was encoded only (1) for a personal and
non-commercial purpose or (2) by a video provider licensed under the
AT&T patents to provide MPEG-4 compliant video. No license is granted
or implied for any other use for MPEG-4 standard.
Disclaimer
• Unauthorized reproduction of this guide is prohibited.
• All measurements based on Canon testing standards.
• Information subject to change without notice, as are product
specications and appearance.
• Illustrations and screenshots in this guide may dier slightly from the
actual equipment.
• The above items notwithstanding, Canon cannot be held liable for any
loss arising from the use of this product.
