Cyberlink Media Suite Help 14.0 User’s Guide MS14 ENU

User Manual: cyberlink Media Suite - 14.0 - User’s Guide Free User Guide for Cyberlink Media Suite Software, Manual

Open the PDF directly: View PDF .
Page Count: 107 [warning: Documents this large are best viewed by clicking the View PDF Link!]

Contents
Introduction
- CyberLink Media Suite Programs
  - The PowerStarter Program
- System Requirements
Movie
Video
Photo
Music
Data & Backup
Utilities
CyberLink Mobile Apps
Technical Support
Index

User's Guide

Media Suite

CyberLink

To the extent allowed by law, Media Suite IS PROVIDED “AS IS”,

WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR

IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTY FOR

INFORMATION, SERVICES, OR PRODUCTS PROVIDED THROUGH

OR IN CONNECTION WITH Media Suite AND ANY IMPLIED

WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR

PURPOSE, EXPECTATION OF PRIVACY, OR NON-INFRINGEMENT.

BY USING THIS SOFTWARE, YOU AGREE THAT CYBERLINK WILL

NOT BE LIABLE FOR ANY DIRECT, INDIRECT, OR CONSEQUENTIAL

LOSS ARISING FROM THE USE OF THIS SOFTWARE OR MATERIALS

CONTAINED EITHER IN THIS PACKAGE.

The terms and conditions here under shall be governed and

construed in accordance with the laws of Taiwan.

Media Suite is a registered trademark along with other company

and product names mentioned in this publication, used for

identification purposes and remain the exclusive property of their

respective owners.

International Headquarters

Mailing Address

Web Site

Telephone

Fax

CyberLink Corporation

15F., No. 100, Minquan Rd., Xindian Dist.

New Taipei City 231, Taiwan (R.O.C.)

http://www.cyberlink.com

886-2-8667-1298

886-2-8667-1385

Contents

....................................................1Introduction

................................................................................................2CyberLink Media Suite Programs

............................................................................2The PowerStarter Program

................................................................................................7System Requirements

....................................................10Movie

................................................................................................10Play a Movie Disc

............................................................................11Supported Disc Formats

............................................................................11Movie Disc Playback Controls

............................................................................16Playback Features

................................................................................................20Browse and Play Movies in Movie Library

............................................................................20Browsing Through Movies in the Movie Library

............................................................................21Supported Movie File Formats

............................................................................21Playing Movie Files in PowerDVD

................................................................................................22Play a Movie Folder

................................................................................................22View Online Movie Info

....................................................23Video

................................................................................................23Play Video Files

............................................................................24Supported Video File Formats

............................................................................24Video Playback Controls

................................................................................................29Advanced Video Editing

................................................................................................30Organize Videos

............................................................................30Managing Video Files

................................................................................................32Easy Video Editing

CyberLink Media Suite Help

............................................................................33Making Video Fixes

............................................................................33Fine Tuning Videos

............................................................................33Trimming Videos

................................................................................................34Upload to Social Networks

............................................................................34Uploading Videos to YouTube

............................................................................34Uploading Videos to Facebook

................................................................................................35Convert Videos

................................................................................................36Create a Movie Disc

................................................................................................36Edit a Movie Disc

....................................................38Photo

................................................................................................38Play Back 2D Photos in 3D Mode

................................................................................................39Import and Organize Photos

............................................................................39Importing Photos

............................................................................41Organizing Photos

................................................................................................45Edit and Print Photos

............................................................................45Editing Photos

............................................................................47Print Photos

................................................................................................48Create or Play a Slideshow

............................................................................48Playing Slideshows

............................................................................48Creating Slideshows

................................................................................................53Create a Photo Gallery Disc

................................................................................................55Create a Slideshow Disc

............................................................................55Selecting Photos for Disc

............................................................................56Creating the Disc

............................................................................56Editing Slideshow Style and Music

............................................................................57Configuring Advanced Disc Settings

............................................................................58Burning Your Disc

................................................................................................58Upload to Social Network

............................................................................59Uploading Photos to Facebook

............................................................................59Uploading Photos to Flickr

................................................................................................60Advanced Photo Adjustment

iii

....................................................63Music

................................................................................................63Play Music

............................................................................64Supported Audio Formats

............................................................................64Music Playback Controls

............................................................................67Using the Audio Equalizer

................................................................................................68Rip an Audio CD

................................................................................................68Convert an Audio File

................................................................................................69Burn a Music Disc

................................................................................................70Record Audio

................................................................................................71Edit Audio

............................................................................71Adding Audio into the Library

............................................................................72Editing Audio

............................................................................74Audio Effects

............................................................................75Exporting Audio

....................................................77Data & Backup

................................................................................................77Create a Data Disc

................................................................................................78Copy a Disc or Burn a Disc Image

............................................................................78Copying a Disc

............................................................................79Burning a Disc Image

................................................................................................80Back Up and Restore Files

............................................................................80Backing Up Files

............................................................................82Restoring Files

................................................................................................83Duplicate a Movie Disc

................................................................................................84Organize Discs in the Disc Manager

............................................................................85Manually Importing Discs to the Disc Library

....................................................87Utilities

................................................................................................87Erase a Disc

................................................................................................87Extract Files From a Disc Image

CyberLink Media Suite Help

................................................................................................88Mount a Virtual Drive

................................................................................................89Transfer Media to Devices

................................................................................................89Burn a DVD Folder

................................................................................................89Print a Disc Label

............................................................................90Step 1 - Select a Label Type

............................................................................90Step 2 - Edit Disc Information

............................................................................90Step 3 - Edit Layout

............................................................................90Step 4 - Print

....................................................91CyberLink Mobile Apps

....................................................92Technical Support

................................................................................................92Before Contacting Technical Support

................................................................................................93Web Support

................................................................................................93Help Resources

Introduction

Chapter 1:

Welcome to CyberLink Media Suite, the all-in-one multimedia suite that opens up

the world of digital entertainment on your PC.

Note: this document is for reference and informational use only. Its content

and the corresponding program are subject to change without notice.

Using CyberLink Media Suite you can perform the following functions, and more:

·play discs, movie files, disc folders, video files, photo slideshows, and music

with the world's #1 playback software on the PC.

·burn music or data discs in a variety of formats.

·perform advanced editing on videos with a powerful editing tool that

provides unlimited move-making possibilities.

·convert photos, videos, and audio to other media formats and transfer them

to portable devices.

·apply easy edits and enhancements to both your photos and videos.

·make advanced adjustments on photos manually or by applying adjustment

presets.

·author Blu-ray Disc, AVCHD, and DVD discs with motion menus.

·organize your photos with features such as face tagging, or use them to

create dazzling slideshows and photo gallery discs.

·record, trim, cut, and add effects to your audio files that you want to use in

your video editing or share with friends.

·share your photos on Flickr and Facebook, and upload your videos to

YouTube or Facebook.

·keep track of all your burned media and discs with the Disc Manager.

·back up and restore your data, or create and print disc labels.

·erase and copy discs, or duplicate a movie disc.

·extract files from or mount a disc image, or burn it to a disc.

CyberLink Media Suite Help

CyberLink Media Suite

Programs

You can access all the CyberLink Media Suite programs through the CyberLink

PowerStarter interface. It provides easy access to all of the CyberLink software on

your PC, for whatever task you have at hand. From managing your media files and

creating movies, to organizing your disc content, burning discs and much more.

The PowerStarter Program

CyberLink PowerStarter is the complete portal for all of your CyberLink software.

CyberLink PowerStarter helps you work with your media using a task-based

approach. You can also quickly launch all your CyberLink software from one

convenient location, or easily upgrade/update any of these programs.

Introduction

Menu Icons

Clicking a menu icon reveals a list of features and functions you can choose from,

and provides instant and direct access to all of your CyberLink programs. Click the

menu icon that corresponds to the type of media you want to access or features

you want to explore.

Movie

From the Movie menu you can watch movies on a disc or play back movie files and

folders on your hard drive. In this section you can also access MoovieLive.com to

view all the latest movie information, trailers. and reviews.

Video

In the Video menu you can organize and play the videos files on your computer, or

edit them into creative movie productions. You can also burn the videos to a disc

with menus, convert the videos to different formats, or share them with the world

by uploading them to the Internet.

Photo

The Photo menu contains a variety of functions for importing, managing, fixing,

editing, and touching up your photos. Features also include the creation of

slideshows and photo discs, and the sharing and printing of your photos.

Music

Within Music you can play back your music or burn it to a disc in a variety of

formats. You can also rip the music to your hard drive, convert it to another format,

record new audio, and edit and enhance it with rich effects.

Data & Backup

Access the Data & Backup menu to burn data files to a variety of different disc types

or search for previously burned discs in the Disc Manager. You can also copy your

CyberLink Media Suite Help

data and movie discs, back up and restore all of the important data on your

computer, and more.

Utilities

Use the Utilities menu to manage your discs by creating, burning or extracting files

from disc images. You can also erase rewritable discs, edit some video discs, burn

DVD folders to disc, design and print disc labels, and more.

Function Items

Select one of the menu items to reveal all the available functions and tasks you can

perform using your CyberLink software. Select any of the functions to open the

corresponding software program and complete the specified task, or access the

requested feature.

Quick Access Buttons

CyberLink PowerStarter includes the following buttons that provide quick access to

the Favorites, CyberLink Products, CyberLink Apps, About, and Preferences

windows.

Introduction

Favorites

You can add the functions and programs you use most often into the Favorites

menu, so you can quickly and easily access them when required. Click the

button to view the Favorites menu.

By default, this window is empty, but you can add a function or program to the

Favorites menu by doing this:

1. Click the menu icon to display the function/program you want to add to your

favorites.

2. Hover your mouse over the function/program and then click .

Note: if you would like to remove a function/program from your favorites, just

deselect the highlighted star next to the function in the menu.

CyberLink Products

To view a list of the CyberLink programs installed on your computer, click . You

can then select any of the program names to open the corresponding software.

Note: the specific programs available in CyberLink PowerStarter are

dependent on the products installed on your computer and the versions you

purchased.

CyberLink Mobile Apps

Click the button to discover CyberLink's award-winning mobile apps for

your Android, iOS, and Windows devices. See CyberLink Mobile Apps for more

information.

CyberLink Media Suite Help

About

Click to display CyberLink PowerStarter version information.

Preferences

To configure the behavior of the CyberLink PowerStarter program, click the

button, and then set your desired preferences.

·Return to CyberLink Media Suite after you close a program: select this option

to return to the CyberLink Media Suite (PowerStarter) main window after you

close a program you accessed through the program portal.

·Automatically check for the latest version: select this option if you want

CyberLink PowerStarter to automatically check for newer versions of the

installed software programs every 14 days. When new versions are available,

the corresponding Update and Upgrade buttons in the Upgrade window are

enabled.

·Receive CyberLink product information: allows you to enable/disable banner

and running text in the About window.

·Use my photos as cover photos: select this option to display your photos on

the CyberLink PowerStarter start-up window. Click to select the folder

on your computer that contains the photos you want to use.

·Display language: click the arrow to the right of the settings area if you

want to change the program display language. Select the Use system default

language option to use the same language as your current operating system

language, or select the other option and manually select the UI language from

the drop down list that you want to use.

Note: CyberLink PowerStarter will default to English if your operating

system's language is not supported by the program.

Introduction

Upgrading/Updating CyberLink Software

Select the button to access the Upgrade/Update window, where you can view

product version information for the CyberLink programs currently installed on your

computer. They are listed in a table, along with the current version number, and

buttons indicating whether or not there is a free update or an upgrade for the

software available.

·When enabled, click on in the Update column to open a page that lets

you download the latest patch update for the corresponding software.

·You may also click on in the Upgrade column to open a page that allows

you to upgrade a specific product, when available.

System Requirements

The system requirements listed below are recommended as minimums for working

with the programs. You may find that your system, while meeting these

recommended minimums, requires expanded capacity for some tasks.

Minimum System Requirements

Operating System

·Microsoft Windows 10, 8.1/8, 7, or above.

Screen Resolution

·1024 x 768, 16-bit color or above.

Memory

·1 GB required.

·2 GB required for Blu-ray Disc playback.

·3 GB or above recommended for 32 bit OS.

·6 GB or above recommended for 64 bit OS and 3D

editing.

Hard Disk Space

·5 GB required (400 MB is for Magic Music Library).

·10 GB (20 GB recommended) for DVD production.

·60 GB (100 GB recommended) for Blu-ray Disc/AVCHD

production.

CPU

·SD video editing and export: Pentium 4 3.0 GHz, AMD

Athlon 64 X2, or above (Required).

CyberLink Media Suite Help

·AVCHD* and BD* burning: Pentium Core 2 Duo E6400

or AMD Phenom II X4 (Recommended).

·Full-HD video editing and export: Intel Corei5/7 or AMD

Phenom II X4 (Recommended).

·2K/4K/3D* video editing and export: Intel Corei7 or

AMD FX with 64bit OS and 6 GB RAM (Recommended).

·Multiple camera editing: Intel Core i5/7 or AMD

Phenom II X4 (Recommended).

VGA

·ATI Radeon HD 5000 or above.

·NVIDIA GeForce 9500GT or above.

·Intel HD Graphics

·128 MB VGA VRAM or higher (1 GB or higher VRAM and

OpenCL capable are recommended).

Video Capturing

Device

·OHCI IEEE 1394 compliant device.

·PCI or USB 1.0/2.0 capture device compliant with WDM

standard.

·DV camcorder connected via OHCI-compliant with IEEE

1394.

·DVD camcorder connected via USB 2.0.

·Sony MicroMV/AVCHD/HDV camcorder.

Burning Device

·A BD-RE burner is required to burn Blu-ray Discs.

·A DVD burner (DVD+R/RW or DVD-R/RW) is required to

burn DVD/MiniDVD/AVCHD titles.

·A CD burner (CD-R/RW) is required to burn VCD/SVCD

titles.

Microphone

·A microphone is required for recording audio.

Internet

Connection

·Internet connection required for initial software

activation, social media connection, and some codec

activation.

Additional Hardware Support for Blu-ray™ 3D and TrueTheater™ 3D

HDMI 1.4 Enabled

3DTV

·Eye wear: active shutter glasses.

·Supported hardware: HDMI 1.4 enabled 3D TV.

·Supported graphics card: NVIDIA GeForce GTX 460 and

AMD Radeon HD 6800 series or above.

NVIDIA 3D Vision

·NVIDIA 3D Vision or 3D Vision 2 Wireless Glasses Kit +

Introduction

3D Vision-Ready Display + 3D Vision Compatible

NVIDIA Graphics Card are required.

·Please download and install 3D VISION CD for Desktop

GPUs v1.38 or Verde Notebook 3D VISION CD v1.3.

·120Hz Frame-sequential 3D LCD (NVIDIA 3D Vision-

Ready).

·Native format: 120 fps left and right.

·Eye wear: Active shutter glasses (NVIDIA 3D Vision Kit).

·Supported hardware: Asus VG278H, Asus G51J-SZ028V,

Acer GD245HQ, Acer GD235H.

3D Polarizer LCD

·Native format: row-interleaved.

·Eye wear: polarized glasses.

·Supported hardware: Zalman ZM-M220W, Acer

5738DG (Notebook).

3D Ready HDTV

(DLP)

·Native format: checkerboard.

·Eye wear: Active shutter glasses.

·Supported hardware: Mitsubishi 1080p DLP HDTV,

Samsung 3D Ready DLP HDTV.

CyberLink Media Suite Help

Movie

Chapter 2:

CyberLink Media Suite provides access to CyberLink PowerDVD, a software disc

player with all the features and controls of a normal living room disc player. It offers

feature-rich navigation controls for an interactive and tailored viewing experience.

Note: for a detailed description of all the playback features available in

CyberLink PowerDVD, press the F1 key on your keyboard when within the

program window to open the help file.

CyberLink PowerDVD also provides access to all the movie information you will

need from the Internet.

Play a Movie Disc

In CyberLink Media Suite you can play all of your movie discs with the world's #1

playback software on the PC, CyberLink PowerDVD. To start watching a movie disc,

select the Play a Movie Disc function within the Movie menu of CyberLink

PowerStarter.

Note: for a detailed description of all the playback features available in

CyberLink PowerDVD, press the F1 key on your keyboard when within the

program window to open the help file.

When CyberLink PowerDVD launches, you are prompted to choose one of the

following modes:

·PC Mode: this mode lets you experience the ultimate in immersive

entertainment and includes all of the available CyberLink PowerDVD features

in your version.

·TV Mode: this mode helps you recreate a cinema experience in your own

home.

Note: select the Remember my selecti on option if you want your chosen

mode to be your default mode every time you launch CyberLink PowerDVD.

Once selected, you will not be prompted to choose a mode when PowerDVD

is launched.

Insert a movie disc into your disc drive, and CyberLink PowerDVD will play it

automatically. If there is a disc already in your disc drive when you opened

CyberLink PowerDVD, just click the play button to start playback.

Movie

Supported Disc Formats

The optical disc formats that CyberLink PowerDVD supports are listed below:

Optical Disc Types

File Formats

Blu-ray Discs*/Blu-ray 3D**

Discs

BDAV, BDMV

DVD

DVD-Video, AVCHD*, AVCREC*, DVD-VR, DVD+VR

VCD, SVCD

Note: * this feature is not available in some versions of CyberLink

PowerDVD. ** If your version of CyberLink PowerDVD supports Blu-ray 3D

playback, you may have to enable playback in More Blu-ray Disc Settings.

Movie Disc Playback Controls

When playing back a movie disc in the BD/DVD Movies section of the Media

Library tab, the playback controls display as follows:

Note: the following are the playback controls in PC Mode. For information on

the TV Mode playback controls, please consult the TV Mode help file.

Note: the below table includes the hotkey for each specific button on the

playback controls, if available. For a complete list of all the hotkeys in

PowerDVD and the corresponding behavior, see the hotkey table in the

program's help file.

Icon

Button

Hotkey

Description

Elapsed time

Displays the time

elapsed for the

current movie.

Hover your

mouse over it to

CyberLink Media Suite Help

reveal two

buttons that let

you jump

backward and

forward in the

movie. Click

to quickly jump

back 8 seconds,

or to skip

forward 30

seconds.

Navigational slider

Visually displays

elapsed playback

time. Click along

the navigational

slider to jump to

different

moments in the

movie, or click

and drag it to use

Instant Seek to

quickly browse

and find specific

scenes in your

movie. Hover

your mouse over

the slider to use

Instant

Thumbnails to

quickly find

scenes you

previously viewed

during DVD

playback.

Access DVD menu

controls/Pop-up menu

(Blu-ray* playback only)

During DVD

playback, this

button provides

quick access to

the title and root

Movie

menus on the

DVD. Click or

press M on your

keyboard to

display the pop-

up menu over the

disc content.

Rewind/Step backward

(when paused)

[

During playback

click this button

to reverse

through content

and access the

Play Speed

Navigator. When

playback is

paused, use the

button to

step backward.

Stop

Stops playback of

media.

Jumps to the next

chapter on the

movie disc.

Mute/Volume adjustment

Q / + and -

Click to mute the

volume; click

again to turn

mute off. To

manually adjust

the volume, hover

your mouse over

this button and

then use the slider

to increase or

decrease the

volume.

Enable 3D*

Enable 3D movie

playback.

CyberLink Media Suite Help

Movie duration/Remaining

time

Click to toggle

between movie

duration and

remaining

playback time.

Go to full screen

Click to enter full

screen mode.

PowerDVD settings menu

Opens the

PowerDVD

settings menu,

where you can

access player

settings and

PowerDVD

preferences.

Zoom

Ctrl+mouse

wheel**

Hover your

mouse over this

button, and then

use the slider to

use Instant Zoom

to digitally zoom

in or out on a

DVD movie's

video image

(note: this feature

is not available

during Blu-ray

Disc playback).

When zoomed in,

you can click and

drag on the video

image to view

different areas of

the image. ** note

that this hotkey

can be modified

in settings, so the

behavior may

differ.

Movie

Fast forward/Step forward

(when paused)

]

During playback

click this button

to fast forward

through content

and access the

Play Speed

Navigator. When

playback is

paused, use the

button to go

to the next frame

of video.

Play/Pause

Space bar

Plays and pauses

media playback.

Returns to the

previous chapter

on the movie

disc.

Media playback menu

During playback,

this button

provides access to

the media

playback menu.

TrueTheater effects

Provides access to

the TrueTheater

video effect

controls.

Return to previous window

Backspace

Click to stop

playback and

return to the

media library.

Restore from full screen

Z / Esc

Click to exit full

screen mode.

Eject disc

Ctrl+E

When playback is

stopped, this

button is

displayed. Click it

CyberLink Media Suite Help

to eject the disc in

the selected disc

drive.

Note: * this feature is not available in some versions of CyberLink

PowerDVD.

Playback Features

The following are some playback features that are sure to enhance your movie

viewing experience:

·TrueTheater Video Enhancements

·3D Playback

·Play Speed Navigator

TrueTheater Video Enhancements

During the playback of Blu-rays, DVDs, video files (including movie files and TV

shows), and videos on YouTube, you can enable TrueTheater video enhancements

to maximize the playback quality.

Click the button to open the TrueTheater window and display the following

options:

Smart Enhancement

On this tab you can apply all the TrueTheater enhancements automatically during

playback. CyberLink PowerDVD dynamically adjusts (turns on or off) TrueTheater

video enhancements to provide optimum performance, while maximizing playback

quality.

·Video: select this option to enable video enhancements and make the video

look better. Drag the available slider left or right to adjust the amount of

TrueTheater video enhancements applied. TrueTheater Video enhances video

brightness, contrast, and also the color, making it more saturated and vivid.

TrueTheater will also sharpen video (if the resolution is less than 720p) to make

it look clearer.

Movie

·Audio: select this option to enable audio enhancements and make the audio

sound better. Drag the available slider left or right to adjust the amount of

TrueTheater audio enhancements applied. TrueTheater Audio amplifies the

movie volume, boosting movie bass and dialogue, to provide a more

immersive media viewing experience.

Advanced Enhancement

Select this tab to manually enable and set the amount of TrueTheater

enhancements applied to the video as follows:

Video

Select the Video option to enable the following True Theater video enhancements:

·TrueTheater HD: select this option to up scale the original video to a higher

resolution version, which is sharper and artifact-free. TrueTheater HD is

capable of boosting 480p video to 1080p. Use the slider to adjust the

sharpness to the best output that suits your configuration.

·TrueTheater Lighting (CyberLink Eagle Vision 2): is a video enhancement

technology developed by CyberLink that detects video content and

dynamically adjusts the brightness/contrast ratios so that you do not need to

change the video settings if the video you are watching contains scenes that

are overly dark or too bright. Use the level slider to adjust the TrueTheater

Lighting effect the desired amount.

·TrueTheater Color: select this option to dynamically adjust the color

saturation ratio in the video. Use the level slider to make the colors in the

video more vivid, without affecting skin tones.

·TrueTheater Motion: select this option to enable frame rate upsampling, from

24 fps up to 60 fps, to make panning scenes, particularly in action movies,

play more smoothly. TrueTheater Motion can improve the frame rate of video

content to 60 or 72 fps, depending on the output frame rate of your display.

·TrueTheater Noise Reduction: select this option to reduce the amount of

video noise when playing home video files in CyberLink PowerDVD, including

High-ISO and TV signal noise. Once enabled, drag the slider to increase or

decrease the level of noise reduction on the video.

Note: this feature is not available for disc playback.

CyberLink Media Suite Help

·TrueTheater Stabilizer: select this option to employ motion compensation

technology when playing home video files that are shaky. This feature is ideal

for use with video files taken without a tripod or recorded while moving.

Note: this feature is not available for disc playback.

Audio

Select the Audio option to enable TrueTheater audio enhancements. Drag the

available slider left or right to adjust the amount applied. TrueTheater Audio

amplifies the movie volume, boosting movie bass and dialogue, to provide a more

immersive media viewing experience.

3D Playback

CyberLink PowerDVD supports the playback of 3D* Blu-ray Discs*, DVDs, video files,

and 3D YouTube videos, and also lets you view JPS, MPO, and side by side 3D

photos in 3D. CyberLink PowerDVD can also convert any regular 2D Blu-ray Disc**,

DVD movie, video file, YouTube video, and photo into 3D using TrueTheater 3D*.

3D Playback Warning: if you experience headaches, dizziness, nausea, blurry

eyesight or other symptoms while watching 3D video content, it is highly

recommended that you stop playback immediately and see your doctor.

Note: * this feature is not available in some versions of CyberLink

PowerDVD.

Enabling 3D Playback

To enable 3D* playback, just select the button on the playback controls and

then select one of the following options:

·Play 3D Media in 3D: select this option to auto enable playback of all 3D media

(3D** Blu-ray Disc or DVD, 3D video file, 3D photos). Once enabled, CyberLink

PowerDVD will automatically play 3D media in 3D once playback starts, so

that you don't need to enable 3D playback every time you play it.

Note: ** if your version of CyberLink PowerDVD supports 3D Blu-ray Disc

playback, you may have to enable playback in settings.

Movie

·Convert 2D Media to 3D: select this option if you want CyberLink PowerDVD

to convert all 2D media (2D Blu-ray Discs, DVDs, video files, YouTube videos,

photos) to 3D using TrueTheater 3D when playback starts. Once enabled, you

won't need to enable TrueTheater 3D every time you want to convert 2D

media.

Note: 3D mode is enabled when the 3D icon on the playback controls

displays as . Note that a number of features are disabled during 3D

playback.

If you need to adjust your 3D display configuration or the playback preferences,

click on the playback controls and then select More 3D Preferences.

Note: * this feature is not available in some versions of CyberLink

PowerDVD.

Play Speed Navigator

When wanting to rewind or fast forward through content on movie discs, in movie

files, or when playing videos files, you can click the or button to access

the Play Speed Navigator for easier control.

Note: you can also access this panel by right-clicking above or below the

player controls.

Drag the blue control slider left to increase the rewind speed up to 16 times the

normal playback speed, or right to increase the forward speed up to 32 times. You

can also click to quickly jump back 8 seconds, or to skip forward 30

CyberLink Media Suite Help

seconds.

Press the space bar on your keyboard to close the control panel and resume normal

playback.

Browse and Play Movies in

Movie Library

Select the Browse and Play Movies in Movie Library function within the Movie

menu of CyberLink PowerStarter to launch CyberLink PowerDVD.

Note: the following is information on browsing and playing movie files in PC

Mode. For information on the TV Mode playback, please consult the TV

Mode help file.

In the Movie Library you can browse through and play the movie files in your

personal movie library. Movies files are DVD/Blu-ray Disc* folders and individual

video files (movie files you recorded with a PVR) that are saved on your computer's

hard drive.

Browsing Through Movies in the

Movie Library

When browsing through the movie files in the Movies/TV tab's Movie Library section

of the media library, you can view their movie cover art, rating information, and

more. Click the down arrow in the top right of the window to filter the movies by

10 R ec ently Played Movies or Mov ies N ot Watc hed Y et if required.

Note: use the zoom slider on the playback controls to use Instant Scale to

dynamically resize the movie cover art to a desired size. If you are not

seeing the latest movie files in the media library, just click to refresh.

As you browse through the library, note the icons next to each of the movie files.

Their meanings are as follows:

· - indicates the movie has not yet been watched.

· - indicates the movie was partly watched, but not to the end.

· - indicates the movie was previously watched.

If a movie file is not displaying the cover art, you can insert an image file (in the JPG

Movie

or PNG format) in the movie file's folder and name it “folder” to use it as the cover

art. You can also right click on the movie file and then select Set Cover Art. In the

Select Image dialog, browse to and then select an image on your computer's hard

drive to use as the cover art.

Note: if the cover art for a movie file in the library is incorrect, you can right

click on it and select Hide Online Info to remove it and the related movie

information.

Right-click on a movie file thumbnail in the media window and then select Locate

on Disk to view the folder where the file is located in Windows Explorer. If you'd like

to remove a movie file from the media library (and from your computer's hard

drive), just right click on it and select Delete from Disk.

Supported Movie File Formats

In CyberLink PowerDVD you can play back movie files in the following formats:

Movie file formats: 264, 265*, 26L, 3G2, 3GP, 3GP2, 3GPP, ASF, AVC, AVI, BSF*, DIV,

DIVX*, DVR-MS, FLV, H264, H265*, HEVC*, JSV, JVT, M1V, M2P, M2T, M2TS, M2V, M4V,

MK3D*, MKV, MOD, MOV, MP4, MP4V, MPE, MPEG, MPG, MPV, MTS, MVC*, QT, TOD,

TP, TPD, TRP, TS, TTS, VC1*, VOB, VRO, WM, WMV, WTV.

Note: * this feature is not available in some versions of CyberLink

PowerDVD.

Playing Movie Files in PowerDVD

You can play back movie files by doing any of the following:

·drag and drop a movie file directly onto the CyberLink PowerDVD user

interface or the PowerDVD desktop icon.

·to play a movie file in your media library, click Movies/TV in the media panel,

and then . Browse to the folder that contains your movie files, and

then double-click on a movie file to begin playback.

·to play a movie file on your hard drive, click the My Computer tab in the

media panel, and then browse to the folder that contains your movie file.

Double-click on a movie file to begin playback.

·if CyberLink PowerDVD is set as the default player for a movie file on your

computer, you can also just double-click on a file in Windows Explorer to play

CyberLink Media Suite Help

it back.

Note: see Video Playback Controls for a list and description of the controls

and playback features available during movie file playback.

Play a Movie Folder

You can play back any DVD and unprotected Blu-ray Disc* folders that are on your

hard drive. To play a movie folder, do this:

Note: the following is information on playing movie folders in PC Mode. For

information on the TV Mode playback, please consult the TV Mode help file.

1. Select the Play a Movie Folder function within the Movie menu to open

CyberLink PowerDVD.

2. Click Movies/TV in the media panel, and then .

3. Click the button on the playback controls, and then browse to and select

the movie folder.

4. Click on OK and then play button to begin playback.

Note: * this feature is not available in some versions of CyberLink

PowerDVD.

View Online Movie Info

If you'd like to browse through the latest movie information available, select the

View Online Movie Info option in the Movie menu of CyberLink PowerStarter to go

to the MoovieLive web site. There you can view information about all the latest

movie releases, find out what are the top rated movies, and which are the most

watched by CyberLink PowerDVD users. You can also read movie reviews, watch

movie trailers, read bios on your favorite actors, and much more.

Video

Chapter 3:

The video functions in CyberLink Media Suite let you play video files in CyberLink

PowerDVD, edit your videos in CyberLink PowerDirector, produce movie discs with

CyberLink PowerProducer, and much more. You can also convert videos to other

file formats with CyberLink MediaEspresso, or use CyberLink MediaShow to

organize, enhance, and share your videos.

Note: for a more detailed description of these programs and there functions,

please consult the product help files.

Play Video Files

To play back videos files in CyberLink PowerDVD, select the Play Video Files

function within the Video menu of CyberLink PowerStarter. The CyberLink

PowerDVD main window displays.

Note: the following is information on browsing and playing movie files in PC

Mode. For information on the TV Mode playback, please consult the TV

Mode help file.

You can play back videos files by doing any of the following:

Note: for a detailed description of all the playback features available in

CyberLink PowerDVD, press the F1 key on your keyboard when within the

program window to open the help file.

·drag and drop a video file directly onto the CyberLink PowerDVD user

interface or the PowerDVD desktop icon.

·to play a video file in your media library, select Videos in the media panel, and

then browse to the folder that contains your videos. Double-click on a video

file to begin playback.

·to play a video file on your hard drive, click the My Computer tab in the media

panel, and then browse to the folder that contains your video file. Double-

click on a video file to begin playback.

·if CyberLink PowerDVD is set as the default player for a video file on your

computer, you can also just double-click on a file in Windows Explorer to play

it back.

CyberLink Media Suite Help

Note: for a list of the available playback controls, see Video Playback

Controls. For information on some of the playback features that are available

during video file playback, see Playback Features.

Supported Video File Formats

In CyberLink PowerDVD you can play back videos in the following file formats:

Video formats: 264, 265*, 26L, 3G2, 3GP, 3GP2, 3GPP, ASF, AVC, AVI, BSF*, DIV,

DIVX*, DVR-MS, FLV, H264, H265*, HEVC*, JSV, JVT, M1V, M2P, M2T, M2TS, M2V, M4V,

MK3D*, MKV, MOD, MOV, MP4, MP4V, MPE, MPEG, MPG, MPV, MTS, MVC*, QT, TOD,

TP, TPD, TRP, TS, TTS, VC1*, VOB, VRO, WM, WMV, WTV.

Note: * this feature is not available in some versions of CyberLink

PowerDVD.

Video Playback Controls

When playing back a video file in the Videos section of the Media Library tab, or a

movie file in the Movie Library section, the playback controls display as follows:

Note: the below table includes the hotkey for each specific button on the

playback controls, if available. For a complete list of all the hotkeys in

PowerDVD and the corresponding behavior, see the hotkey table in the

program's help file.

Icon

Button

Hotkey

Description

Elapsed time

Displays the time

elapsed for the

current video.

Hover your mouse

over it to reveal

two buttons that

let you jump

backward and

Video

forward in the

video. Click to

quickly jump back

8 seconds, or

to skip forward 30

seconds.

Navigational slider

Visually displays

elapsed playback

time. Click along

the navigational

slider to jump to

different

moments in the

video, or click and

drag it to use

Instant Seek to

quickly browse

and find specific

scenes in your

video. Hover your

mouse over the

slider to use

Instant Preview to

quickly find

scenes you

previously viewed

during movie file

playback.

Media playback menu

During playback,

this button

provides access to

the media

playback menu.

Returns to the

previous video file

in a folder/playlist.

Play/Pause

Space bar

Plays and pauses

media playback.

CyberLink Media Suite Help

Fast forward/Step forward

(when paused)

]

During playback

click this button

to fast forward

through content

and access the

Play Speed

Navigator. When

playback is

paused, use the

button to go

to the next frame

of video.

Zoom

Ctrl+mouse

wheel**

Hover your mouse

over the button,

and then use the

slider to use

Instant Zoom to

digitally zoom in

or out on the

video image.

When zoomed in,

you can click and

drag on the video

image to view

different areas of

the image.** note

that this hotkey

can be modified

in settings, so the

behavior may

differ.

PowerDVD settings menu

Opens the

PowerDVD

settings menu,

where you can

access player

settings and

PowerDVD

preferences.

Video

Video duration/Remaining

time

Click to toggle

between movie

duration and

remaining

playback time.

Full screen

Click to enter full

screen mode.

Enable 3D*

Enable 3D video

playback. See 3D

Playback for more

information.

Mute/Volume adjustment

Q / + and -

Click to mute the

volume, or to turn

mute off. To

manually adjust

the volume, hover

your mouse over

this button and

then use the slider

to increase or

decrease the

volume.

Jumps to next

video file in a

folder/playlist.

Stop

Stops playback of

media.

Rewind/Step backward

(when paused)

[

During playback

click this button

to reverse through

content and

access the Play

Speed Navigator.

When playback is

paused, use the

button to

step backward.

Note: this feature

CyberLink Media Suite Help

is not available for

some video file

formats.

TrueTheater effects

Provides access to

the TrueTheater

video effect

controls. See

TrueTheater

Effects.

Return to previous window

Backspace

Click to stop

playback and

return to the

media library.

Rotate right

Ctrl+.

When playing

back or browsing

video files in the

Videos section of

the media library,

click to rotate the

current video 90

degrees in the

clockwise

direction. Note:

this feature is not

supported on

videos that have a

resolution greater

than 3300 X 1900,

or when the

output display is

greater than 3300

X 1900.

Restore from full screen

Z / Esc

Click to exit full

screen mode.

When browsing

through video

files in the Videos

section of the

media library,

Video

click this button

to share the video

on Facebook,

YouTube, or

Vimeo.

Play to

Select a movie

file, TV show, or

video in the

media library and

then click this

button to play it

on another device

or display.

Note: * this feature is not available in some versions of CyberLink

PowerDVD.

Advanced Video Editing

Use CyberLink PowerDirector to edit all of your video files into professional-looking

movie masterpieces.

To edit your videos in CyberLink PowerDirector, do this:

1. Select the Advanced Video Editing function within the Video menu of

CyberLink PowerStarter.

2. If required, select the Full Feature Editor option to open CyberLink

PowerDirector to the edit window.

3. Click and then select one of the following options:

·Import Media Files: import media files individually.

·Import a Media Folder: import the entire contents of a folder that contains the

media files you want to use in your current project.

Note: you can also drag and drop media onto the CyberLink PowerDirector

window to import it into the program.

4. Proceed to edit your movie. If required, you can download additional media

from Flickr and Freesound to include in your video production, and custom

CyberLink Media Suite Help

effects and titles from DirectorZone.

Note: for a detailed description on how to edit videos in CyberLink

PowerDirector, press the F1 key on your keyboard when within the Edit

window to open the help file.

Organize Videos

You can import all of your videos into the CyberLink MediaShow library, and use

the program to organize them and prepare them for editing, burning, uploading to

the Internet, and more.

To organize your videos using CyberLink MediaShow, select the Organize Videos

function within the Video menu of CyberLink PowerStarter. The CyberLink

MediaShow main window displays.

Managing Video Files

When you are viewing the video thumbnails in the media library, there are several

management options available. Double click on a folder/tag/album etc. in the

media library to display all of the videos inside.

Adding and Editing Tags

You can add keyword search tags to your videos in the media library. Tags help you

find specific videos in the library more quickly and are useful when uploading

content to YouTube, as people use keyword tags to find media they are interested

in.

Adding Tags

To add keyword tags to a video file in the library, just right-click on the file and then

select Add Tag. You can also select some videos files or a media album in the

library and then Edit > Tag at the top of the media window. In the pop-up menu

that displays, select the keyword tags you want to add.

You can also add new keyword tags.

Adding New Tags

If you want to add a new keyword tag to the library so that it is available in the pop-

Video

up menu, do this:

Note: you can quickly add keyword tags to some video files, or entire media

albums, simply by dragging and dropping them on to the Tags section of

the library side bar.

1. Right-click on a video file in the library and then select Add Tag.

2. Enter the new tag name in the field provided in the Add Tag window, and

then click on .

3. Select Done. The tag will be added and applied to the selected video file.

Creating and Managing Albums

You can create new albums or place your videos into existing ones, helping you

organize your videos and prepare it for slideshows, movie discs, and more.

Adding Videos to Albums

You can organize your videos into albums, which are then easier to use in

slideshows, movie projects, etc. To add videos to an album, just right-click on the

file and then select Add to Album. In the pop-up menu that displays, select one of

the following albums:

·Favorite Media: select to add the video file to your favorite media album. You

can also add videos to this album at any time by selecting the button

when playing back media.

·Create New Album: select to create a new album in the media library and add

the selected videos to it.

·Custom Albums: any custom albums you create are in this pop-up menu. Just

select to add the video to the album.

Repeat the above process to add as many videos to an album as you wish.

Creating New Albums

If you want to add a new album to the media library, do this:

1. Select Create New Album in the Albums section, or right-click on a video file

CyberLink Media Suite Help

in the library, select Add to Album > Create New Album.

2. In the Album Information window, enter the information as follows:

·Name: enter the album name.

·Date: enter a date for the album, which can be either the date the media was

shot or the date the album was created.

·Location taken: if required, enter the location where the media was shot.

·Description: add a description for the album, if required.

3. Select OK. The custom album is saved to the media library.

Easy Video Editing

CyberLink MediaShow offers several editing features, including trimming unwanted

portions from video clips, or performing various touch ups on videos in preparation

for editing, uploading, etc.

Note: the edits you make to a video file is not applied to the original source

clip. CyberLink MediaShow keeps a log of your desired changes and then

asks you to produce a new video file version when you are done editing.

To fix and enhance your videos, do this:

Note: you can easily undo any edits that you make to a video by right-

clicking on it in the media window and selecting Undo Changes. You can

also click to use the Edit Video - Log to roll back changes to a

specific version.

1. Select the Easy Video Editing function within the Video menu of CyberLink

PowerStarter. The CyberLink MediaShow main window displays.

2. Select all of the videos in the media library that you want to edit, and then

drag and drop them in the media tray.

3. Select the Edit button, and then select Edit Media. The Edit window opens.

Note: you can also select a number of videos in the media library, right-click

on them, and then select Edit to access the Edit window.

Once you are done editing videos, select the Preview button to play them back, or

Save if save them as new video files. Select the Share button to send them to

friends and family, or post them on a social media website. See Upload to Social

Video

Networks for more information.

Making Video Fixes

CyberLink MediaShow provides you with several common video fixes, including

auto lighting adjustments, fixing shaky video, and reducing unwanted video and

audio noise.

In the Edit window, select on the tab to perform the following fixes on your

videos.

·Fix shaky video: select to automatically fix a video clip that contains moments

where the camera is shaking.

·Auto fix lighting: select to automatically fix the lighting in the video.

·Reduce video noise: select to remove blocky artifacts from a video clip’s

image.

·Reduce audio noise: use this option to filter out background noises from the

audio track. Drag the slider to remove more or less noise.

Select Close to save the changes to your video, and then Back to produce and

export the video as a new file.

Fine Tuning Videos

Use the fine tune function in the Edit window to manually adjust the Brightness,

Contrast, Saturation, or White balance of videos. Select the tab to use the

sliders to adjust the video’s properties as required.

Select Close to save the changes to your video, and then Back to produce and

export the video as a new file.

Trimming Videos

Select the Trim button in the Edit window if you want to trim out some portions

from a video clip. Follow the steps on the user interface to mark the portions of the

video clip that you want to keep or remove.

Select Apply to trim the video clip, and then Back to produce and export the video

as a new file.

CyberLink Media Suite Help

Upload to Social Networks

You can share all of your videos with your friends and family by uploading them

directly from the CyberLink MediaShow library to YouTube and Facebook.

To upload videos to a social network, select the Upload to Social Networks function

within the Video menu of CyberLink PowerStarter. The CyberLink MediaShow main

window displays.

Uploading Videos to YouTube

You can upload videos from the library directly to the YouTube video sharing web

service.

To upload a video to YouTube, do this:

Note: you can also drag and drop some videos or a whole album onto the

YouTube section of the library sidebar to quickly upload them.

1. Select all of the videos in the media library that you want to upload to

YouTube, and then drag and drop them in the media tray.

2. Select the Share tab and then the YouTube button. The Upload to YouTube

wizard displays.

3. Follow the detailed instructions in the wizard to upload your video.

Note: if you do not have a YouTube account, select the Sign up to

YouTube link to register.

4. Select the Done button once your videos are uploaded.

Uploading Videos to Facebook

You can upload videos from the library directly to your Facebook page.

To upload videos to Facebook, do this:

Note: you can also drag and drop some videos files or a whole album onto

the Facebook section of the library sidebar to quickly upload them.

1. Select all of the videos in the media library that you want to upload to

Facebook, and then drag and drop them in the media tray.

Video

2. Select the Share tab and then the Facebook button. The Upload to Facebook

wizard displays.

3. Follow the detailed instructions in the wizard to upload your videos.

Note: if you do not have a Facebook account, select the Sign up to

Facebook link to register.

4. Select the Done button once your videos are uploaded.

Convert Videos

With CyberLink MediaEspresso you can convert videos into formats compatible

with a variety of portable devices, game consoles, and more.

To convert videos, do this:

Note: for a more detailed description of this program and its functions,

please consult the product's help file.

1. In the Video menu of CyberLink PowerStarter, select Convert Videos. The

CyberLink MediaEspresso program opens.

2. Click on the Import Media button and then select By File to import individual

videos files, or select By Folder to import all the videos in a specific folder.

3. Browse to and select all of the video files you want to import and convert, and

then click on the Open button.

4. Next, choose whether you want to convert the videos for use on a Mobile

Phone, Media Player, or Game Console.

Note: you can choose the Convert button to convert media using a custom

profile you create. For a detailed description of this feature, press the F1 key

on your keyboard to view the MediaEspresso help file.

5. To convert video files, select:

·a preset media format profile from the Video drop-down menu. The profiles

that are available is dependent on the device model you select.

·Smart Fit if you want CyberLink MediaEspresso to automatically select the

best format and resolution for you based on the source video.

·More if you want to use another available profile. Set the video's format,

aspect ratio, and audio format using the profile options available. The formats

CyberLink Media Suite Help

and options that are available is dependent on the device model you select.

6. If required, select from the available conversion settings. See the Conversion

Settings section in the MediaEspresso help file for more information.

7. Click OK to start the conversion.

Create a Movie Disc

You can take the video files on your computer and produce a movie disc in the CD,

DVD or Blu-ray Disc format, complete with stylish menus, in just a few simple steps.

In CyberLink PowerProducer you can also author and burn 3D Blu-ray, AVCHD, and

DVD discs.

To produce a movie disc in CyberLink PowerProducer, do this:

1. Select the Create a Movie Disc function and then the format of the disc you

want to create within the Video menu of CyberLink PowerStarter. The

CyberLink PowerProducer select media window displays.

Note: for a detailed description on how to customize your disc in CyberLink

PowerProducer, press the F1 key on your keyboard when within the program

window to open its help file.

2. Select your disc's video format. See the Selecting Your Media section of the

CyberLink PowerProducer help file for more information.

3. Next, capture video or import existing video files into the program. See the

Importing Media into PowerProducer section of the CyberLink

PowerProducer help file for more information.

4. Select and customize a disc menu for your movie disc. See the Customizing

Disc Menus section of the CyberLink PowerProducer help file for more

information.

5. Finalize your disc by previewing your movie and then burning it to the disc.

See the Finalizing Your Disc section of the CyberLink PowerProducer help file

for more information.

Edit a Movie Disc

If you burned video onto a rewritable disc in the +VR, -VR or BDAV format, you can

go back and edit the content at a later time in CyberLink PowerProducer.

To edit a disc after burning, do this:

Video

1. Select the Edit a Movie Disc function within the Video menu of CyberLink

PowerStarter. The CyberLink PowerProducer edit disc window displays.

2. In the Confirm Disc to be Edited window, insert your target disc, select a

maximum recording speed, and then click Next.

3. Make any of the required modifications in the CyberLink PowerProducer

program as follows:

·To import more media, see Importing Media into PowerProducer section of

the CyberLink PowerProducer help file.

·To edit clips or slideshows, see Editing Media Clips section of the CyberLink

PowerProducer help file.

·To edit slideshows, see Editing Photo Slideshows section of the CyberLink

PowerProducer help file.

·To modify the disc menu, see Custom iz ing D isc Menus section of the

CyberLink PowerProducer help file.

4. When you are done your edits click Next.

5. Click Burn to re-burn your disc with the edits applied.

CyberLink Media Suite Help

Photo

Chapter 4:

The photo functions in CyberLink Media Suite let you organize, enhance, and share

all of your photos using CyberLink MediaShow. With CyberLink Media Suite you can

also turn your photos into dazzling slideshows and photo gallery discs, print them

out in a variety of formats, create slideshow DVDs, share them on social networks,

and much more.

Note: for a more detailed description of these programs and there functions,

please consult the product help files.

Play Back 2D Photos in 3D Mode

In CyberLink MediaShow you can convert any 2D photos in the media library into

3D photos.

To convert photos to 3D, do this:

1. Select the Play Back 2D Photos in 3D Mode function within the Photo menu

of CyberLink PowerStarter. The CyberLink MediaShow main window displays.

2. Select all of the photos in the media library that you want to convert to 3D,

and then drag and drop them in the media tray.

3. Select the Create button and then 2D to 3D Photo.

4. In the Create 3D Photo window, set the following options:

·Name: enter a name for the newly created 3D photos.

·Type: select the format of 3D photo file. Currently only the MPO format is

available.

·if required, select the button to specify the folder on your computer’s hard

drive where you want to save the converted photos.

·select what you are using the converted photos for, i.e. for viewing or

printing.

5. Select OK to convert the 2D photos to 3D.

Photo

Import and Organize Photos

In the Photo feature of CyberLink Media Suite, you can import all of the photos on

your computer into CyberLink MediaShow. Once in the program, you can use

CyberLink MediaShow's photo features to organize them in albums, add keyword

search tags, tag people's faces, and much more.

To import and organize your photos using CyberLink MediaShow, select the Import

and Organize Photos function within the Photo menu of CyberLink PowerStarter.

The CyberLink MediaShow main window displays.

Importing Photos

You can easily import all of the photos on your computer, optical discs, and

removable devices into the CyberLink MediaShow program.

Supported Formats

CyberLink MediaShow supports the following photo file formats:

Photos: BMP, JPG, and PNG.

RAW photo formats: CyberLink MediaShow also supports the import of most

camera RAW photo formats.

3D photo formats: MPO.

Importing Photos from Your Computer

To import the photos in folders on your computer, do this:

Note: you can also just drag and drop photos onto the CyberLink MediaShow

window to import them into the program.

1. In the CyberLink MediaShow window, click the button in the media

library.

2. Click the button to add a folder to the media library. CyberLink MediaShow

scans the folders in the list every time the program is launched and

automatically loads any new photos into the library.

CyberLink Media Suite Help

Note: if you want to remove a folder from the scanned folders list, select it

and then select .

3. Click OK to save your changes. CyberLink MediaShow will import all the

support photo formats that are in the folders you added to the scanned folder

list.

Importing from Optical/Portable Device

In CyberLink MediaShow, you can import photos from an optical device (CD, DVD,

Blu-ray Disc drive) or from portable removable devices such as mobile phones, USB

removable hard drives, memory sticks, and more.

To import from an optical/portable device, do this:

1. Ensure the device is connected (and turned on if necessary) to your computer,

and then select the Import button.

2. Select the device you want to import from in the list (optical drive, camera,

mobile phone, etc.).

3. In the Import window the content on the disc, device, portable hard drive, etc.

displays. By default, CyberLink MediaShow selects each media thumbnail for

import. Deselect any of the photos that you don’t want to import into the

library.

4. At the bottom of the Import window, set the following:

·Path: set the location on your computer’s hard drive where the photos are

stored.

·Folder name: enter a name for the new media folder that is added during the

import process.

·Exclude duplicates: select to have CyberLink MediaShow ignore photos that

were previously imported into the library.

·Delete files from source device/card after import: select this option if you

want CyberLink MediaShow to remove the photos from the portable device

after importing them.

5. Select Import Selected to import all the selected photos into the library and

into the specified folder on your computer.

Photo

Organizing Photos

When you are viewing the photo thumbnails in the media library, there are several

management options available. Double click on a folder/tag/album etc. in the

media library to display all of the photos inside.

Adding and Editing Tags

You can add keyword search tags to your photos in the media library. Tags help

you find specific photos in the library more quickly and are useful when uploading

content to Flickr, as people use keyword tags to find media they are interested in.

Adding Tags

To add keyword tags to a photo in the library, just right-click on the file and then

select Add Tag. You can also select some photos or a media album in the library

and then Edit > Tag at the top of the media window. In the pop-up menu that

displays, select the keyword tags you want to add.

You can also add new keyword tags.

Adding New Tags

If you want to add a new keyword tag to the library so that it is available in the pop-

up menu, do this:

Note: you can quickly add keyword tags to some photos, or entire media

albums, simply by dragging and dropping them on to the Tags section of

the library side bar.

1. Right-click on a photo in the library and then select Add Tag.

2. Enter the new tag name in the field provided in the Add Tag window, and

then click on .

3. Select Done. The tag will be added and applied to the selected photo.

Tagging Faces

You can manually tag the faces in your photos in the media library, or have

CyberLink MediaShow auto detect and tag the faces for you. Once the faces are

CyberLink Media Suite Help

tagged, the photos are then categorized in the Faces section of the media library,

and included on Facebook if you choose to share them on the social media web

site.

Auto Tagging Faces

CyberLink MediaShow uses face recognition to auto detect and tag faces in your

photos. To have CyberLink MediaShow auto scan a group of photos for faces, do

this:

Note: you can quickly tag all the faces in some photos, or whole photo

albums, simply by dragging and dropping them on to the Faces section of

the library side bar.

1. Select the Faces section in the media library side bar.

2. Select the Tag F aces button.

Note: you can also select some photos or a whole photo album in the

library and then Edit > Tag Faces at the top of the media window.

3. Select which photos you want to tag faces in as follows:

·Tag faces in all photos: select to scan and tag faces in all of the photos in the

media library. Select the Start button to begin the tagging process.

·Tag faces in specified photos: select if you only want to scan and tag faces in

the photos in a specific media folder. Select Next to continue and then the

folders you want to scan for faces. Select Start to begin.

Note: select Tag faces in the media tray photos if you only want the

program to scan any photos that are currently in the media tray.

·Continue previous tagging process: select this option if CyberLink MediaShow

already scanned some photos for faces, but you did not complete the tagging

process.

Note: if your computer's VGA card supports CUDA technology or DirectX

11, and there are enough resources available, select Enable hardware

support for face analysis to reduce the time it takes to analyze your

photos.

4. CyberLink MediaShow analyzes the specified photos for faces and then

displays the results in the Tag Faces window.

Photo

Managing Tagged Faces

After CyberLink MediaShow has analyzed photos, it groups similar faces together in

the Tag Faces window. In this window you can review each face and associate it

with a person in your media library, or add a new person. You can also skip faces if

you want to add them later.

Note: use the drop-down to sort the tagged faces by name or tag count.

To manage the tag faces, for each group of faces, do one of the following:

·click on Select and then select the person from the list that matches the face

in the photo.

·if the person tagged in the photo is not in your media library, click on Select

and then Add New Person. Enter the person’s name and then select OK to add

the person and tag the person in the photo.

·if the person tagged in the photo is in the suggestion list, just select the

button with the name of the person.

·select Skip to ignore the tagged face.

Manually Tagging Faces

If CyberLink MediaShow missed faces during the auto tagging process, you can

manually tag faces in your photos. To manually tag faces, do this:

1. Right-click on a photo in the media library and then select Edit.

2. In the Edit window, select Tag Faces.

3. Select Create New Tag.

4. Drag the square to the position in the photo where the face is located.

5. Resize the square if required and then select Unknown.

6. Select an existing person from the list or select Add New Person to add a new

person to the media library. Enter the person’s name and then select OK to

add the person and tag the person in the photo.

7. Repeat the process to tag other faces in the photo. Select Close when you are

CyberLink Media Suite Help

done tagging faces, and then Back to return to the media window.

Creating and Managing Albums

You can create new albums or place your photos into existing ones, helping you

organize your photos and prepare it for slideshows, and more.

Adding Photos to Albums

You can organize your photos into albums, which are then easier to use in

slideshows, etc. To add photos to an album, just right-click on the file and then

select Add to Album. In the pop-up menu that displays, select one of the following

albums:

·Favorite Media: select to add the media file to your favorite media album. You

can also add media to this album at any time by selecting the button when

playing back media.

·Create New Album: select to create a new album in the media library and add

the selected media to it.

·Custom Albums: any custom albums you create are in this pop-up menu. Just

select to add the media to the album.

Repeat the above process to add as many photos to an album as you wish.

Creating New Albums

If you want to add a new album to the media library, do this:

1. Select Create New Album in the Albums section, or right-click on a photo in

the library, select Add to Album > Create New Album.

2. In the Album Information window, enter the information as follows:

·Name: enter the album name.

·Date: enter a date for the album, which can be either the date the media was

shot or the date the album was created.

·Location taken: if required, enter the location where the media was shot.

·Description: add a description for the album, if required.

Photo

3. Select OK. The custom album is saved to the media library.

Edit and Print Photos

You can perform instant fixes, fine tuning, and apply effects to your photos within

the CyberLink MediaShow program. Once edited, you can then print them out in a

variety of sizes.

To access the editing and printing features in CyberLink MediaShow, select the Edit

and Print Photos function within the Photo menu of CyberLink PowerStarter. The

CyberLink MediaShow main window displays.

Editing Photos

CyberLink MediaShow offers several editing features, including adding creative

effects to your photos or performing various touch ups on photos in preparation

for using your media in slideshows, printing, etc.

To fix and enhance your photos, do this:

Note: you can easily undo any edits that you make to a photo by right-

clicking on it in the media window and selecting Undo Changes. You can

also click to use the Edit Photo - Log to roll back changes to a

specific version.

1. Select all of the photos in the media library that you want to edit, and then

drag and drop them in the media tray.

2. Select the Edit button, and then select Edit Media. The Edit window opens.

Note: you can also select a number of photos in the media library, right-

click on them, and then select Edit to access the Edit window.

When editing a photo, select the button to compare all of the changes to your

photos side by side.

Making Photo Fixes

CyberLink MediaShow provides you with several common fixes for your photos,

including automatic adjustments, fixing red-eye, and a photo cropping feature.

CyberLink Media Suite Help

In the Edit window, select the tab to perform the following fixes on your

photos.

·Crop: allows you to cut out the parts of the photo you don’t want. Select a

Fixed ratio to crop a specified size out of the photo, or None to manually

select the crop area. Drag the mouse on the photo to set the area you want

cropped, and then select Apply to perform the crop.

Note: select Invert to reverse the size of a fixed area.

·Red-eye: select this option to remove unwanted red-eye from your photos.

Just follow the instructions on the user interface to use this feature.

·Straighten: if your photo was taken unevenly and appears to be crooked,

select this option and use the Degree slider to make it more level.

·Auto Brightness: select to automatically adjust the photo’s brightness.

·Auto Contrast: select to automatically adjust the photo’s contrast.

·Auto Balance: select to automatically adjust the photo’s color balance.

·Auto Fix Lighting: select to automatically fix the lighting within the photo.

Select Close to save the changes to your photo, and then Back to return to the

main media window.

Fine Tuning Photos

Use the fine tune function in the Edit window to manually adjust the Brightness,

Contrast, Saturation, White balance or Sharpness of photos. Select the tab

and use the sliders to adjust the photo’s properties as required.

Select Close to save the changes to your photo, and then Back to return to the

main media window.

Adding Photo Effects

CyberLink MediaShow lets you add display and color effects to photos. Select the

tab to apply the following effects to photos in the media library.

Photo

·Black & White: converts color photos to black and white.

·Sepia: applies a dark brown-grey hue that resembles the effect of aging on old

photographs.

·Matte: adds a white matting to photos. Select and drag the focus to an area of

the photo, and then use the slider to increase or decrease the matting size.

·Vignette: use your mouse to set the focus area of the vignette on the photo,

and then use the slider to adjust its Size.

·Soft Focus: with your mouse, select the focus area for the effect, and then use

the sliders to adjust the effect’s Size and amount of blur (Soft) used.

·Focal B&W: the focal black and white effect applies color to a focused area of

a photo, while the rest is in black and white. Use your mouse to set the focus

area, and then use the slider to adjust the Size of the colored area.

·Tint: the tint effect adds highlighted color throughout your photo. Pick a

desired color and then use the slider to adjust its Intensity.

·Glow: select the glow effect to make all the lighter areas of a photo appear to

glow.

·Antique: select the antique effect to give your photo an old fashioned look, as

if it was taken more than 50 years ago.

Select Close to save the changes to your photo, and then Back to return to the

main media window.

Print Photos

CyberLink MediaShow lets you print out copies of your photos in a variety of sizes.

To print photos, do this:

1. Select all of the photos in the media library that you want to print, and then

drag and drop them in the media tray.

2. Select the Print button, and then Print.

3. Set the printing options as follows:

·Layout: select how you want the selected photos printed out. You can select

from a variety of sizes, allowing you to print one or more photos out on a

single piece of paper.

CyberLink Media Suite Help

·Printer: select the printer from the drop down menu that you want to print

your photos on.

·Fit: select whether to shrink the size of the photo to fit the printing area or

have CyberLink MediaShow crop the photo to fit it.

·Printer Setup: select this button to set specific printer options, such as page

layout and whether to print double-sided. The options available depend on

the printer that is connected to your computer.

·No. of copies per photo: enter the number of copies you would like printed

out in the field provided.

4. Select the Print button to begin printing the photos.

Create or Play a Slideshow

With CyberLink MediaShow, you can play all the photos in the media library in a

slideshow, or use them to create a custom slideshow.

To create or play a slideshow, select the Create or Play a Slideshow function within

the Photo menu of CyberLink PowerStarter. The CyberLink MediaShow main

window displays.

Playing Slideshows

You can quickly play a slideshow with the photos in your CyberLink MediaShow

library. To play photos in a slideshow, do this:

1. Select all of the photos in the media library that you want to play in the

slideshow, and then drag and drop them into the media tray.

2. Click the button. The slideshow begins to play automatically.

3. Use the playback controls to control the playback of your slideshow.

Creating Slideshows

CyberLink MediaShow lets you create custom slideshows that include both your

photos and videos. You can select from a number of styles, and then add

background music, text, and blank slides.

Once you are done creating a slideshow, select the Preview button to play it back,

Photo

or Produce if save it as a video file. Select the Share button to share the slideshow

video with friends and family.

Selecting Media for the Slideshow

To select the media for the custom slideshow, do this:

1. Select all of the media in the media library that you want to use in the

slideshow, and then drag and drop it in the media tray.

2. Select the Create button, and then select Slideshow. The Create Slideshow

window opens, displaying all of the media you selected in the slide tray.

Use the buttons on the slide tray to do the following:

·if you want to add more media to the slideshow, select the button, select

it in the media library, and then select Add Selected Media. Select Close to

return to the Create Slideshow window.

·if you want to add extra blank slides, or color boards, to a slideshow select

the button. Select a color and then the Add Color Board button to add

the new slide at the current location in the slideshow. Select Done when

finished.

·select to rotate the media on a slide 90 degrees in the counterclockwise

direction. Select to rotate it 90 degrees in the clockwise direction.

·to rearrange the slide order, just select media in the slide tray and then drag it

to the new position.

·to remove media or a slide from the slideshow, select it in the slide tray and

then select the button.

CyberLink Media Suite Help

Designing the Slideshow

After you have added media to the slideshow, you can customize its design by

editing the style and adding background music.

To design the slideshow, do this:

1. In the Create Slideshow window, select the Design button.

2. Edit the options as follows:

·Slideshow style: select the transitions used between the slides, which gives a

slideshow its distinct style. Select No Effect if you don’t want to use any

transitions between slides.

Note: you can customize the transition that is used on each slide in the

slideshow. See Customizing Slides for more information.

·Aspect ratio: set the aspect ratio of the slideshow.

·Display duration: enter in the length of time each photo or custom slide is

displayed in the slideshow. The duration entered does not alter the length of

any video clips included in the slideshow.

Note: you can customize the duration of each slide in the slideshow. See

Customizing Slides for more information.

·Set default text: select this option if you want to set the default text that is

displayed when to add new text to a slide. One selected, you can either have

CyberLink MediaShow use a photo’s description or file name by default.

3. Select OK to close the Design window, and then Save to save the changes to

the slideshow.

Customizing Slides

In the Transition window you set the transition that is used on every slide in the

slideshow, and customize each slide’s duration. You can also set the audio level for

any video clips that are included in the slideshow.

To customize the slides, do this:

Photo

1. Select the slide in the slide tray that you want to customize, and then select

the Transition button.

2. In the Transition window, edit the options as follows:

·Display duration: enter in the length of time the selected photo or custom

slide is displayed in the slideshow.

·Sound mix: if the selected slide contains a video clip, use this slider to set the

audio level between the background music and the video’s audio. Drag the

slider all the way to the Back ground music side if you want to completely

mute the video’s audio.

·Transition: select the transition that is used at the beginning of the selected

slide.

3. Select OK to close the Transition window, and then Save to save the changes

to the slideshow.

Adding Title Text to Slides

You can add title text descriptions to slides in a slideshow, on both slides that

contain media and any blank or title slides you add.

To add text to slides, do this:

1. Select the slide in the slide tray that you want to add text to, and then select

the Add Text button.

2. Select in the title text box that displays on the slide and then enter or modify

the default text on the slide.

3. Select the button if you want to modify the title text’s font properties,

including style, color, and size.

4. Select and drag the title text box to the desired location on the slide.

5. Select to add text animation effects, if required.

6. Select to preview the text on the slide. Once you are satisfied, select

outside the text box to set the text.

CyberLink Media Suite Help

Note: to edit existing text on a slide, just double-click on the title text box.

Select to remove any unwanted text.

7. To add more text to this or other slides, select the Add Text button and then

repeat the above steps.

8. Select Save to save the changes to the slideshow.

Adding Music

You can add background music to your slideshow. To add background music, do

this:

1. In the Create Slideshow window, select the Music button.

2. Add background music to the slideshow as follows:

·Play music during slideshow: select this option to enable background music

during the playback of the slideshow.

·Match slideshow length to music: select this option to set the duration of the

entire slideshow to the length of all the music selected.

Note: when this option is selected, all other duration settings are ignored.

·Select folder or audio file for background music: select the Browse button

and then select the audio file (in the WMA or MP3 format) that will be used as

the slideshow’s background music. You can also select a folder that contains

multiple music files.

·Select and arrange background music: select this option if you want to

customize the background music in the slideshow. Use the button to add

all of the individual music files you want in the background music playlist.

Use the and buttons to set the order of the music in the playlist, and

to preview the music.

3. Select OK to close the Add Music window, and then Save to save the changes

to the slideshow.

Photo

Create a Photo Gallery Disc

When you create a photo gallery disc, you are essentially creating a photo album on

a disc. You can create more than one album on a single photo gallery disc.

To create and burn a photo gallery disc, do this:

1. Select the Create a Photo Gallery Disc function within the Photo menu of

CyberLink PowerStarter, and then select the type of disc (CD, DVD, Blu-ray

Disc) you want to create. The Photo Gallery Disc window opens.

2. In the Disc Compilation pane, if required, enter a custom name for the photo

album that will appear on the disc.

3. Use the search pane to find the photos you want to include on your disc.

Select the photos you want to burn and then drag and drop them in the disc

content area (Click the button to switch to the thumbnail view to make it

easier to find the exact photos you are looking for).

Note: you can also click the button to add the photos. Ensure that you

have the album you want to add the photos to selected in the Disc

Compilation pane before adding your photos.

4. Repeat the last two steps to add more photos to an album as required. You

can also click the button to create a new album on the disc.

5. If required, click the Edit button to configure the photo gallery disc settings as

follows:

·Gallery title: enter in a title for your photo gallery. The title displays on your

disc after it is burned.

·Custom Logo: click on the Custom Logo button to customize the logo used in

your photo gallery, as follows:

§Don't include logo in photo gallery: select this option if you don’t want to

include a logo in your created photo gallery.

§Include logo in photo gallery: select this option if you want to include a

logo in your created photo gallery. Click the button to select an

image to use as the logo, replacing the default CyberLink logo.

§Include UR L link on logo: select this option if you want to include a URL

link on the logo. Once selected, enter the URL address in the field provided

CyberLink Media Suite Help

(http://). When users click on the logo in the created photo gallery, they are

taken to the specified URL.

§Click OK to save your changes.

·Slideshow speed: enter the duration, in seconds, you want each photo or slide

to display when your photo gallery is played as a slideshow.

·Background image: click the Change button to set the image that is used as

the background in the photo gallery. If none of the default images suit your

gallery disc, click the Browse button to use your own custom image.

·Display EXIF information: if the images were taken with a digital camera that

supports EXIF, select this option if you want the image details displayed in

your photo gallery disc.

·Add background music: if you want music to play in the background as users

browse through your photo gallery disc, select this option and then click

Browse to select the music file you want to use.

·Include editor’s note: if you want to include a note or description about your

photo gallery, select this option, click Edit, and then enter the Title and

Content (note/description) in the fields provided.

·Include external URL: if you want to include a web site link on the photo

gallery disc, select this option, click Edit, and then enter the web site Name

and URL (http://) in the fields provided.

·Click the Preview button if you want to view what your photo gallery disc will

look like once it is burned to a disc. Click Export to create the stand-alone

photo gallery application in a folder on your hard drive.

6. After you have added all of the photos you want on your disc, click the Next

button.

7. If required, adjust the settings on the General and Options tabs (see the related

sections in Power2Go Settings for more information).

8. Click Burn when you are ready to burn your disc.

Note: select the Auto shut down after burning option if you want

CyberLink Power2Go to automatically shut down your computer once it has

successfully burned your disc.

9. When the burning is complete, select one of the following options in the

window box that opens:

Photo

·Click View Log to view the burning log. The log opens in your default TXT

editor, where you can view and save it.

·Click OK to close the window and then exit.

Create a Slideshow Disc

You can use CyberLink MediaShow to create professional looking slideshow discs

using your photos.

To begin creating a slideshow DVD disc with your photos, select the Create a

Slideshow Disc function within the Photo menu of CyberLink PowerStarter. The

CyberLink MediaShow main window displays.

Selecting Photos for Disc

To select the photos you want to include on the slideshow disc, do this:

1. Select all of the photos in the media library that you want to include on the

slideshow disc, and then drag and drop it in the media tray.

2. Select the Create button, and then select Movie Disc. The Create Movie Disc

window opens, displaying all of the photos you selected in the tray.

3. Use the buttons on the tray to do the following:

·if you want to add more photos, select the Photos tab and then the

button. Select the photos in the media library, and then select Add Selected

Media. Select Close to return to the Create Movie Disc window.

·to rearrange the order of the media on the disc, just select media in the tray

and then drag it to the new position.

·to remove media from the disc, select it in the tray and then select the

button.

CyberLink Media Suite Help

Creating the Disc

In the Create Movie Disc window, just follow the outline steps to set disc properties,

as follows:

1. In the Step 1: Choose disc format section, do the following:

·Format: select the format of your movie disc. DVD: creates a standard DVD

disc.

·Destination drive: select the drive you want to use to burn the move to disc.

2. In Step 2: Enter movie disc title, enter a Title for your movie disc, which

displays on the disc menu’s home page.

3. In Step 3: Select menu template, select the disc menu template you want to

use on your disc. Select No Menu to have the video on your disc play

automatically when the disc is inserted into a disc player.

Note: select Download to download additional disc menu templates from

DirectorZone. Once downloaded, click to import the menu templates

into CyberLink MediaShow.

4. Select Save to save the changes to the slideshow disc.

Editing Slideshow Style and Music

The photos you include on the disc are turned into a slideshow. Before burning the

photos to disc, you can edit the slideshow’s style and music, if required.

To edit the slideshow style and music, do this:

1. Select the Photos tab and then to open the Style & Music window.

2. Set Slideshow style options as follows:

·Style: select one of the following the slideshow styles - Fading: adds a fade in

and fade out effect between the photos in your slideshow. Motion: adds pan

and zoom effects to make your slideshow more engaging with the

appearance of motion. Cell: displays pictures in a creative, movie like

slideshow, complete with credits. If you choose to include background music,

CyberLink MediaShow uses Magic Slideshow technology to display the photos

dynamically along to the beat of the music.

·Change Slideshow Opening: if you select the cell slideshow style, select this

button to enter a title and author’s name for the slideshow, which then

Photo

appears on the opening slide. Deselect the Enable slideshow opening page if

you don’t want it in your slideshow.

·Speed: set the playback speed of the slides in the slideshow.

3. Set Background music options as follows:

·Play music during slideshow: select this option to enable background music

in the slideshow.

·Match slideshow length to music: select this option to set the duration of the

entire slideshow to the length of all the music selected.

·Select folder or audio file for background music: select the Browse button

and then select the audio file (in the WMA or MP3 format) that will be used as

the slideshow’s background music. You can also select a folder that contains

multiple music files.

·Select and arrange background music: select this option if you want to

customize the background music in the slideshow. Use the button to add

all of the individual music files you want in the background music playlist.

Use the and buttons to set the order of the music in the playlist, and

to preview the music.

4. Select OK to close the Style & Music window, and then Save to save the

changes to the slideshow disc.

Configuring Advanced Disc Settings

Before you burn a disc, it is recommended that you first configure advanced disc

settings.

To do this, select the Advanced button in the Create Movie Disc window and then

configure the settings as follows:

Disc Selection

·TV format: select the TV format (NTSC or PAL) of the video that is burned to

the disc. This format should correspond with the region in which you plan to

play the disc.

·Video format: displays the format of the video that is burned to the disc.

MPEG-2: standard definition format found on most DVD discs, and therefore

takes up less space.

CyberLink Media Suite Help

·Audio format: select the desired audio encoding used for your outputted

disc’s audio.

·Aspect ratio: set the aspect ratio for the video. For DVDs you may select

between 4:3 or 16:9.

·Quality: select the video quality of the disc’s video. The video quality settings

offer different bit rates, resulting in files of different sizes. The higher the

quality of the video, the larger the resulting file and the shorter the length of

video that can fit onto a disc.

·Disc capacity: displays the available space on the disc currently inserted in the

selected optical drive (burning device).

Preferences

·Display TV safe zone in the Preview window: select to display a box that

indicates an area that will fit on most TVs, when previewing your completed

disc. Utilizing this feature ensures that menu items are within the display

range of most TVs.

·Auto menu timeout: select this option for the video on your disc to play

automatically after displaying the menu for a short duration.

Burning Your Disc

The final step in creating your movie disc is to select the Burn button to begin

burning your media to disc. Before you proceed, use the Preview function to

ensure your disc is exactly the way you want it.

Upload to Social Network

You can share all of your photos with your friends and family by uploading them

directly from the CyberLink MediaShow library to Flickr and Facebook.

To upload photos to a social network, select the Upload to Social Netw ork function

within the Photo menu of CyberLink PowerStarter. The CyberLink MediaShow main

window displays.

Photo

Uploading Photos to Facebook

You can upload photos from the library directly to your Facebook page.

To upload videos to Facebook, do this:

Note: you can also drag and drop some photos or a whole album onto the

Facebook section of the library sidebar to quickly upload them.

1. Select all of the photos in the media library that you want to upload to

Facebook, and then drag and drop them in the media tray.

2. Select the Share tab and then the Facebook button. The Upload to Facebook

wizard displays.

3. Follow the detailed instructions in the wizard to upload your photos.

Note: if you do not have a Facebook account, select the Sign up to

Facebook link to register.

4. Select the Done button once your photos are uploaded.

Uploading Photos to Flickr

You can upload photos from the library directly to the Flickr photo sharing web

service.

To upload photos to Flickr, do this:

Note: you can also drag and drop some photos or a whole album onto the

Flickr section of the library sidebar to quickly upload them.

1. Select all of the photos in the media library that you want to upload to Flickr,

and then drag and drop them in the media tray.

2. Select the Share tab and then the Flickr button. The Upload to Flickr wizard

displays.

3. Follow the detailed instructions in the wizard to upload your photos.

Note: if you do not have a Flickr account, select the Sign up to Flickr link

to register.

4. Select the Done button once your photos are uploaded.

CyberLink Media Suite Help

Advanced Photo Adjustment

You can perform more advanced adjustments on your photos using the CyberLink

PhotoDirector program. Use the controls to change a photo's white balance, tone,

or fine tune the color. You can also choose from a number of adjustment presets to

make instant adjustments.

To adjust your photos in CyberLink PhotoDirector, do this:

1. Select the Advanced Photo Adjustment function within the Photo menu of

CyberLink PowerStarter. CyberLink PhotoDirector launches.

2. If required, click on Library, and then on the Import button at the bottom of

the library panel.

3. Select one of the following import options:

·Photos: select to import individual photo files. Once selected, browse to and

then select all of the photos on your computer/removable device that you

want to import, and then click Open. Thumbnails of all the photos display in

the Photo Import window.

Note: if the photo files you want to import are not displayed in the current

folder, ensure that the correct file type is selected in the bottom right corner

of the Select Some Photos dialog.

·Folder: select to import a folder that contains your photos. Once selected,

browse to and then select the folder on your computer/removable device that

you want to import photos from, and then click Select Folder. Thumbnails of

all the photos in the selected folder display in the Photo Import window.

·From Camera: select to import photos directly from a digital camera or a card

reader. Ensure that your camera is connected to your computer (and turned

on) and then select From Camera to import photos from it. Once selected, the

Photo Import window displays. Select your camera (or card reader) from the

Source drop-down to display thumbnails of all the photos in the Photo

Import window.

Note: you can use in the bottom right of the preview

window to resize the photo thumbnails.

4. Select Include subfolders, if you are importing photos from a folder, device,

or digital camera, to display and import photos that are in any subfolders.

5. Select Exclude possible duplicates to have CyberLink PhotoDirector filter out

any photos that were imported previously.

Photo

6. Manually select the thumbnails of the photos you want to import, or use the

(deselect all) and (select all) buttons if necessary.

7. Select one of the following two import options:

·Keep in current location: keeps the photos in their original source location.

·Make extra copy in: select this option if you want CyberLink PhotoDirector to

copy the imported photos to another location you select in the Destination

drop-down.

8. If copying the photos to another location, click to select the

Destination where the imported photos are copied. You can also click to

edit the name of the photo folders in this location, if required.

9. If copying the photos to another location, you can Organize the photos by

selecting one of the following:

·Put in Single Folder: puts all of the photos in one folder.

·By Original Folder Structure: duplicates the original folder structure from the

source location.

·By Capture Date: puts the photos in a series of folders, labeled by the date

they were captured. Click to set the date format for the folder naming.

10. Click Import. CyberLink PhotoDirector imports the photos into your project

library.

Note: you can also drag and drop photos onto the CyberLink PhotoDirector

user interface to import them into the program.

11. Proceed to adjust your imported photos as required.

CyberLink Media Suite Help

Note: for a detailed description on how to adjust photos in CyberLink

PhotoDirector, press the F1 key on your keyboard when within the program to

open its detailed help file.

Music

Chapter 5:

The music function lets you burn audio files to a DVD or CD with CyberLink

Power2Go. You can also rip music from an audio CD onto your hard drive, and play

back music using CyberLink PowerDVD. Use CyberLink WaveEditor to edit and add

useful effects to your audio files, or record your own custom audio.

Note: to ensure that your computer has the required codecs for burning and

ripping music files, please make sure that Windows Media Player 10 or later

is installed on your computer.

Play Music

To play back music in CyberLink PowerDVD, select the Play Music function within

the Music menu of CyberLink PowerStarter. The CyberLink PowerDVD main window

displays.

Note: the following is information on playing music files in PC Mode. For

information on the TV Mode playback, please consult the TV Mode help file.

To play back audio in CyberLink PowerDVD, do one of the following:

·insert an audio CD into your disc drive and CyberLink PowerDVD will play it

automatically. If there is a disc already in your disc drive when you opened

CyberLink PowerDVD, click the My Computer tab in the media panel, browse

to and select the disc drive, and then click play to begin playback.

·drag and drop audio files directly onto the CyberLink PowerDVD user

interface.

·to play an audio file in your media library, select Music in the media panel,

and then browse to the folder that contains your audio. Double-click on an

audio file to begin playback.

·to play audio files on your hard drive, click the My Com puter tab in the media

panel, and then browse to the folder that contains your audio files. Double-

click on an audio file to begin playback.

Note: for a list of the available playback controls, see Music Playback

Controls.

CyberLink Media Suite Help

Supported Audio Formats

In CyberLink PowerDVD you can play back audio in the following audio formats:

Optical Disc Types

File Formats

Audio, Karaoke

Audio file formats: AAC, AC3, ADTS, AOB, APE, DTS, FLAC, M4A, MID, MKA, MP2,

MP3, MPA, OGG, RMI, WAV, WMA.

Music Playback Controls

When playing music on the Music tab, the playback controls display as follows:

Note: the below table includes the hotkey for each specific button on the

playback controls, if available. For a complete list of all the hotkeys in

PowerDVD and the corresponding behavior, see the hotkey table in the

program's help file.

Icon

Button

Hotkey

Description

Navigational slider

Visually displays

elapsed playback

time. Click along

the navigational

slider to jump to

different

moments in the

song.

Elapsed time

Displays the time

elapsed in the

current song.

Hover your mouse

over it to reveal

Music

two buttons that

let you jump

backward and

forward in the

song. Click to

quickly jump back

8 seconds, or

to skip forward 30

seconds.

Song duration/Remaining

time

Click to toggle

between song

duration and

remaining

playback time.

Shuffle

Plays the music in

a folder, playlist,

or on a disc in

random order.

Returns to the

previous song in

the folder, playlist,

or on the disc.

Play/Pause

Space bar

Plays and pauses

music playback.

Mute/Volume adjustment

Q / + and -

Click to mute the

volume, or to turn

mute off. To

manually adjust

the volume, hover

your mouse over

this button and

then use the slider

to increase or

decrease the

volume.

PowerDVD settings menu

Opens the

PowerDVD

CyberLink Media Suite Help

settings menu,

where you can

access player

settings and

PowerDVD

preferences.

Play to

Select to play the

current music file

on a home media

server or device

that is connected

to the same

network.

Jumps to the next

song in the folder,

playlist, or on the

disc.

Stop

Stops music

playback.

Repeat

Ctrl+R

Click this button

during playback

to repeat one

or all of the songs

in a folder/

playlist. When the

button displays

as , the repeat

function is off.

Audio equalizer

When playing

back music, click

this button to

access the Audio

Equalizer presets

used to alter the

audio.

Music

Song information

Displays the

album art and

song information

for the current

music that is

playing. If you're

browsing through

media on other

tabs during music

playback, double-

click on the song

information to

quickly return to

the music section

of the media

library.

Using the Audio Equalizer

During music playback, click and then select Audio Equaliz er to access the

equalizer and audio presets you can use to alter the audio in CyberLink PowerDVD.

CyberLink Media Suite Help

Select a preset from the Presets drop-down to change the sound of the audio. The

preset you should select, depends on the type of audio or genre of music you are

playing back. You can also manually adjust the sliders on the equalizer to manually

set the audio output to your custom specifications. Once you have manually set

the sliders to your liking, click the Save button. You can save up to three custom

presets using the Custom Preset 1, 2, and 3 options.

Rip an Audio CD

The Rip Audio function copies audio tracks from an audio CD to your hard drive in

the APE*, FLAC*, M4A* (AAC), MP3, WAV, or WMA format.

Note: * this feature is not available in some versions of CyberLink

Power2Go.

To rip audio files to your hard drive, do this:

1. Select the Rip an Audio CD function within the Music menu of CyberLink

PowerStarter. The CyberLink Power2Go Rip Audio window displays.

2. Insert your disc and then select your drive from the Source drop-down.

Note: if you insert a new disc or select a different drive, click to

refresh and ensure the most updated information displays.

3. Select the audio tracks that you want to copy to your hard drive.

4. Click the button and locate the folder that you want to copy the audio

tracks to.

5. In the Settings section, set the Format and Quality of the outputted audio

files.

6. Click Go to copy the files to your computer.

Convert an Audio File

You can use the Audio Converter utility in CyberLink Power2Go to convert existing

audio into one of these audio file formats: APE*, FLAC*, M4A* (AAC), MP3, WAV, or

WMA.

Music

Note: * this feature is not available in some versions of CyberLink

Power2Go.

To convert audio files, do this:

1. Select the Convert an Audio File function within the Music menu of CyberLink

PowerStarter. The CyberLink Power2Go Audio Converter window displays.

2. Click and then select the files you want to convert. Click Open to add

them into the Audio Converter window.

3. Click the button and then select the location where you want to save

the converted audio files.

4. In the Settings section, set the Format and Quality of the converted files from

the drop-downs.

5. Click Go to convert the audio files and save the files to your computer.

Burn a Music Disc

CyberLink Power2Go makes it easy to create discs to play back your music. You can

create a regular audio CD for playback on traditional CD players, or create a DVD or

CD that contains MP3 or WMA files.

To burn an audio music CD or MP3/WMA music disc, do this:

1. Select the B urn a Music Disc function within the Music menu of CyberLink

PowerStarter. In the CyberLink Power2Go new task window, select the type of

music disc you want to create (Audio CD, WMA CD, MP3* CD, WMA DVD,

MP3* DVD).

2. Use the search pane to find the music you want to include on your disc.

Note: for best search results, make sure you set up the Power2Go library

before creating a music disc. Once you do this, the music files in the library

are organized for you on the Media tab in the search pane and become

searchable using the search field.

3. Select the files you want to burn and then drag and drop them in the content

area.

CyberLink Media Suite Help

Note: you can also click the button to add the music files or the other

available buttons to reorder and preview the music on the disc. If you want to

extract the audio from a video clip and include it on your music disc, simply

add the video clip to the disc.

4. If you would like to edit or add effects to a music file, select it and then click

the button to edit it in CyberLink WaveEditor*. Please consult the help file in

CyberLink WaveEditor for detailed information on editing audio in that

program. Once you finish editing an audio file, the updated file is placed back

in the content area.

5. If required, click the Edit button to set the disc's audio quality, add CD-Text,

and more.

6. Once you have added all of the content you want on your disc, click the Next

button.

7. If required, adjust the settings on the General and Options tabs (see the related

sections in Power2Go Settings for more information).

8. Click Burn when you are ready to burn your disc.

Note: select the Auto shut down after burning option if you want

CyberLink Power2Go to automatically shut down your computer once it has

successfully burned your disc.

9. When the burning is complete, select one of the following options in the

window that opens:

·Click V iew Log to view the burning log. The log opens in your default TXT

editor, where you can view and save it.

·Click OK to close the window.

Note: * this feature is not available in some versions of CyberLink

Power2Go.

Record Audio

You can record your own custom audio in the WAV format in CyberLink

WaveEditor. The audio you record is then imported directly into the library and

saved to the export folder selected in Preferences.

To record audio, do this:

Music

1. Select the Record Audio function within the Music menu of CyberLink

PowerStarter. The CyberLink WaveEditor recording window displays.

2. Set your recording preferences as follows:

·use the slider control to adjust the recording input volume.

·select Time limit and then input a time if you want the recording to

automatically stop after recording for a specified duration.

·select Size lim it and then input an amount if you want the recording to

automatically stop after reaching the indicated file size.

·select Settings to select your audio device and input.

·select Profile to set the quality of the recorded audio.

·select or Begin with fade-in if you want the recorded audio to fade-in, or

End with fade-out if you want it to fade-out at the end.

3. To begin recording audio, click . Click to stop recording and save/

import the recorded file into the CyberLink WaveEditor library. Click Close to

return to main window.

Edit Audio

With CyberLink WaveEditor you can trim, cut, and enhance the audio files that you

want to use in your video editing or share with friends.

To edit your audio files in CyberLink WaveEditor, select E dit Audio in the Music

menu of the CyberLink PowerStarter.

Note: for a more detailed description of this program and its functions,

please consult the product's help file.

Adding Audio into the Library

CyberLink WaveEditor lets you import audio from your hard drive or from a

removable device.

CyberLink Media Suite Help

Importing Audio

To import audio from your hard drive or a removable device, click , browse to

its location, and then click on Open. You can import multiple audio files into the

library at once and then work on them all in CyberLink WaveEditor.

Note: you can also drag and drop audio files into the Library area of

CyberLink WaveEditor to import them into the program.

Supported Formats

CyberLink WaveEditor supports the import of audio files in the following formats:

Audio: MP3, WAV, WMA, M4A*, AC3**

Note: * available in the Standard version, and only in the LE version when

running the program under Windows 7. ** not available in the LE version of

CyberLink WaveEditor.

Editing Audio

Once you have all your audio in the library, you can start editing it. Editing consists

of cropping, trimming, and even adding portions (using the paste function) to your

audio files.

To edit an audio file, do this:

1. Select the audio file in the library that you want to edit.

2. Decide whether you want to edit both channels, or just one channel.

3. Use range selection to select the portion of an audio file you want to edit.

4. Use the editing tools to perform edits on your audio files as follows:

Editing Tools

Click to cut the selected portion out of the audio file, and place it on

your clipboard for pasting.

Click to make a copy of the selected portion on your clipboard for

pasting.

Music

Click to paste the audio wave form you cut or copied to the right of

the current timeline position.

Click to delete the selected portion of the audio file.

Click to crop to the selected portion of the audio file, removing the

parts of the audio file that are not selected.

Note: when you perform edits on an audio file, the original audio file is not

changed. To save the edits, you must export the audio file. See Exporting

Audio for more information.

Adjusting the Master Volume

CyberLink WaveEditor lets you adjust the volume of an audio file at any point in the

timeline. You can make it louder at a certain moment, and then quieter at another,

as required.

To adjust the master volume of an audio file, do this:

1. Use the playback controls or drag the timeline slider to location the position

where you want the audio to reach its loudest/quietest point.

2. Click on the line in the master volume area and drag the volume key to

desired volume level.

3. Use the playback controls or drag the timeline slider to locate the position

where you want the change in audio level to begin.

4. Click on the line in the master volume area and drag the volume key back to

the original volume level.

CyberLink Media Suite Help

Note: this last step is just a recommendation, and is not necessary if you

want the audio to fade up or down from the very beginning to the desired

level.

5. Continue adjusting the volume keys as required to achieve the desired audio

levels throughout the audio file.

Note: to remove a volume key and reset its position back to the original

value, select it and drag it outside the master volume area.

Audio Effects

Within CyberLink WaveEditor you can choose from a number of default effects and

apply them to your audio files. You can also import custom VST plug-in effects that

you downloaded and apply them to your audio.

Default Effects

The default effects available in CyberLink WaveEditor include the most widely used

for your convenience. Users that are looking for more advanced audio effects, can

import custom VST plug-in effects.

Note: to preview an effect, click it in the Effects area, select the Preview

check box, and then click the button.

Importing Effects

With VST plug-in effects you can find and add the desired custom effect you want

on your audio. VST plug-in effects are widely available for download from the

Internet, and can easily be imported into CyberLink WaveEditor.

Note: CyberLink does not guarantee the usability of downloaded VST plug-in

effects, nor the quality of the VST modules.

If you have downloaded a VST plug-in effect, do this to import it into CyberLink

WaveEditor:

1. From the menu select Effects > VST > Import VST Effect.

2. Click on the button and then browse to the location where the

Music

downloaded VST plug-in effect is located.

Note: CyberLink WaveEditor imports VST plug-in effects that are in the DLL

format. If the downloaded effect is in the ZIP format, you must first unzip it

before trying to import it into the program.

3. Select the VST plug-in effect and then click Open.

4. Click OK to import the effect into the VST section of CyberLink WaveEditor.

Applying Effects

When applying effects to audio, you can either apply it to a selected range or the

entire clip. To apply an effect to an audio file, do this:

1. Select the audio file in the library you want to apply the effect to.

2. Decide whether you want to apply the effect to both channels, or just one

channel.

3. Use range selection to select the portion of the audio file that you want to

apply the effect to.

Note: if don't select any portion of the audio file, the effect is applied to the

entire clip.

4. Click on the effect you want to apply. The effect window displays.

5. Adjust the effect settings as required.

6. Click on the OK button to apply the effect to the audio file.

Exporting Audio

Every time you want to save the changes you make to an audio file, CyberLink

WaveEditor saves it as a new file. Essentially you are exporting the original file, and

saving it as new version and even in a new file format if you prefer.

To save and export your audio file as a new version, do this:

1. Select the audio file in the library you want to save/export and then click

2. Enter in a new file name for the file and then select the format you want to

save it as in the Save as type drop down.

CyberLink Media Suite Help

3. Click on Save. The file is saved to the export folder selected in Preferences.

Supported Formats

CyberLink WaveEditor supports the export of audio files into the following formats:

Audio: MP3**, WAV, WMA, M4A*

Note: * available in the Standard version, and only in the LE version when

running the program under Windows 7. ** not available in the LE version of

CyberLink WaveEditor.

Data & Backup

Chapter 6:

With CyberLink Media Suite you can burn your data files to a Blu-ray Disc, DVD or

CD with CyberLink Power2Go. You can also easily make an exact copy of a data

DVD or CD, or use the Disc Manager to archive and keep track of all your burned

content and discs.

Use CyberLink PowerBackup to safely back up and restore all the data on your

computer, or CyberLink PowerDVD Copy to copy a non-CSS protected DVD Video

disc.

Create a Data Disc

You can burn data files to a CD, DVD, or Blu-ray Disc. Data files can include almost

any kind of document or digital file.

To burn a data disc, do this:

1. Select the Create a Data Disc option in the Data & Backup menu of CyberLink

PowerStarter, and then select the type of disc (CD, DVD, Blu-ray Disc) you

want to create. The CyberLink Power2Go Data Disc window opens.

2. Use the search pane to find the files you want to include on your disc.

Note: for best search results, make sure you set up the Power2Go library

before creating a data disc. Once you do this, the data files in the library

become searchable when you enter keywords into the search field.

3. Select the files or folders you want to burn and then drag and drop them in

the content area.

Note: you can also click the button to add the data files or click the

button to create a folder on the disc.

4. After you have added all of the content that you want to burn, click the Next

button.

5. If required, adjust the settings on the General and Options tabs (see the related

sections in Power2Go Settings for more information).

6. Click Burn when you are ready to burn your disc.

CyberLink Media Suite Help

Note: select the Auto shut down after burning option if you want

CyberLink Power2Go to automatically shut down your computer once it has

successfully burned your disc.

7. When the burning is complete, select one of the following options in the

window that opens:

·Click View Log to view the burning log. The log opens in your default TXT

editor, where you can view and save it.

·Click OK to close the window.

Copy a Disc or Burn a Disc

Image

The Copy Disc or B urn a D isc I mage function allows you to make an exact copy of a

disc. However, you must copy the disc contents onto a blank disc of the same disc

type. The Copy Disc function also allows you to burn disc images.

Note: some discs may not be copied if they are copy-protected or contain

errors.

Copying a Disc

The copy disc option allows you to make an exact copy of a disc of any format.

However, you must copy the disc contents onto a blank disc of the same disc type.

(You cannot, for example, copy content from a CD onto a DVD.)

To copy a disc, do this:

1. Select the Copy a Disc or Burn a Disc Image function in the Data & B ackup

menu of the CyberLink PowerStarter program window. In the CyberLink

Power2Go new task window, select Copy Disc to open the Copy Disc window.

2. Select your source and target drives.

3. Select a R ead speed and Write speed for each disc. The speeds you should

select will depend on the burning drives you are using and the quality of the

discs.

4. Select Ignore reading error if you want CyberLink Power2Go to copy the disc

even if errors are encountered.

Data & Backup

5. Select the Copy to hard disk option, if available, to also save a copy of the disc

to your computer’s hard drive.

6. Select Copy w hole disc if you want to copy the entire contents of the disc

onto the destination disc.

7. Enter the Number of copies you want to burn.

8. If available, you can use the following options to assist with the burning

process:

·select Perform write simulation if you want CyberLink Power2Go to simulate

the burning process first to ensure the burn will finish successfully.

·if available, select Verify recorded data if you want CyberLink Power2Go to

verify that the content was successfully burned to the disc.

·if available, select Enable defect management to have CyberLink Power2Go try

to fix any defects on a disc so that content burns correctly.

9. Click Copy to begin the copy and burn process.

10. When burning is complete, select an option in the window that opens:

·Click View Log to view the burning log. The log opens in your default TXT

editor, where you can view and save it.

·Click OK to close the window.

Burning a Disc Image

A disc image is a file on your computer that is the duplicate of the contents and file

structure of a disc. CyberLink Power2Go lets you burn a disc image to a disc.

To burn a disc image, do this:

1. Select the Copy a Disc or Burn a Disc Image function in the Data & B ackup

menu of the CyberLink PowerStarter program window. In the CyberLink

Power2Go new task window, select Burn Disc Image to open the Burn Disc

Image window.

2. Click to select the disc image you want to burn to a disc.

3. Insert your disc and select your drive in the drop-down in the To section.

4. Select a Write speed for burning the disc. The speed you should select will

CyberLink Media Suite Help

depend on the burning drive you are using and the quality of the disc.

5. Enter the N umber of c opies you want to burn.

6. If available, you can use the following options to assist with the burning

process:

·select Perform write simulation if you want CyberLink Power2Go to simulate

the burning process first to ensure the burn will finish successfully.

·select Verify recorded data if you want CyberLink Power2Go to verify that the

content was successfully burned to the disc.

·select Enable defect management to have CyberLink Power2Go try to fix any

defects on a disc so that content burns correctly.

7. Click Burn to start the burning process.

Note: select the Auto shut down after burning option if you want

CyberLink Power2Go to automatically shut down your computer once it has

successfully burned your disc.

8. When burning is complete, select an option in the window that opens:

·Click View Log to view the burning log. The log opens in your default TXT

editor, where you can view and save it.

·Click OK to close the window.

Back Up and Restore Files

Backing up data is an important security procedure that can save large amounts of

time and money in case of disaster, disk failure, attack by a hacker or virus, etc. By

keeping a backup copy of your important data on another medium, you can

quickly and reliably restore your data to its original state.

Backing Up Files

To back up your data, first select B ack Up and R estore F iles in the Data & Backup

menu of the CyberLink PowerStarter program window. Ensure that the Backup

button at the top of the window is clicked, and then follow these simple steps:

Data & Backup

Step 1 - Select Source

In the Backup window select the source by locating and checking the files and

folders that you want to back up in the two file directory panes. (These panes

resemble Windows Explorer in functionality.) You can choose to backup Files and

Folders or Application Data by selecting the desired file type above the directory

panes.

Step 2 - Select Destination

Click Select Destination, then set your backup destination.

·Back up to: Select your backup destination from the drop-down box. Backup

destinations may include hard disk or a disc burner (depending on your

available hardware).

·Back up as: Give each backup file a unique name. To save the backup file to a

different directory, click Browse, then locate and select the folder you want to

use.

·Include Restore Tool: Select to create an executable (.exe) file that allows you

to restore your data on a computer that does not have the PowerBackup

program installed.

·Split into volumes: Divide your backup files into volumes (portions) of the size

you specify.

Step 3 - Select Method

Click Select Method, then choose the backup method (and advanced options, if

desired) that you want to use.

·Backup methods include Full, Differential and Incremental.

·For more options, click Options.

Note: the specific functions of this program depend on the version you have

purchased, and therefore some features may not be available.

CyberLink Media Suite Help

Step 4 - Back Up Files

Click B ack Up Files. Verify that the settings are correct, then click one of the buttons

to begin your backup.

·Click B ack Up Now to begin backing up immediately.

·Click Add to Scheduler to schedule the backup for a later time.

Restoring Files

To restore your data after a backup, first select B ac k U p and R estor e Files in the Data

& Backup menu of the CyberLink PowerStarter program window. Click the Restore

button at the top of the window, and then follow these simple steps:

Step 1 - Select Source

In the Restore window select the source by selecting the restoration source from

the Restore from drop-down box.

·Backup file: Restore from an existing backup file. To open a backup file, click

Browse, then locate and open the file you want to use.

·My Catalog: Restore from existing records of previous backup jobs. (To delete

records from My Catalog, use the Edit > Delete Catalog Record or Delete All

Catalog Records command.)

·Disc drive: Restore from a disc.

Once you select the source, select the files you want to restore.

Step 2 - Select Destination

Click Select Destination, then set your restoration destination.

·Original location: Restore to the original location from which the files were

backed up.

·Alternative location: Restore to a new location. To set a new directory, click

Browse, then locate and select the folder you want to use.

Data & Backup

·Single directory: Restore all of the backed up files to a single new directory. To

set a new directory, click Browse, then locate and select the folder you want

to use.

Step 3 - Select Method

Click Select Method, then choose the restoration method you want to use.

·Do not overwrite: Restores only files that are not found on your hard drive,

and does not overwrite existing files.

·Overwrite older files: Overwrites existing files on your hard drive if the

backed-up copy is newer.

·Alw ays overwrite the files on my computer: Overwrites existing files on your

hard drive with the backed-up copy in every case.

·Ask before overwriting: Prompts you to decide which copy you want to keep.

Step 4 - Restore Files

Click R estore Files and then verify that the settings are correct. Click Restor e Now to

begin restoring files immediately.

Duplicate a Movie Disc

CyberLink PowerDVD Copy is a specialized tool for copying DVD movies from disc

or hard drive onto a back-up DVD. You can likewise create a DVD folder on your

hard drive, or burn it to a DVD as a movie. Easy-to-select options and an

uncomplicated interface simplify the DVD-copying process.

To copy a movie DVD, do this:

1. Select Duplicate a Movie Disc in the Data & Backup menu of the CyberLink

PowerStarter program window. The CyberLink PowerDVD Copy window

displays.

2. Select your video source of the movie DVD you would like to copy.

3. Select the destination where to copy the movie DVD.

4. Click the button and select the specific content from the DVD you

CyberLink Media Suite Help

want to copy, if not all is required.

5. Click . CyberLink PowerDVD Copy burns the movie onto the disc.

Organize Discs in the Disc

Manager

The Disc Manager* is a library of all the discs you have created and burned using

CyberLink Power2Go 10. These discs are automatically imported for you after you

finished the burning task. You can also import discs you burned previously into the

Disc Manager library.

To open the Disc Manager, select the Organize Discs in the Disc Manager option in

the Data & Backup menu of CyberLink PowerStarter. Note the label snapshots in the

Disc Manager window, as they are there to help you find your burned discs more

quickly.

To look for discs in the Disc Manager library, select tags on the left of the window to

filter the discs. You can also enter a keyword in the search field in the top left of the

window to search for a disc or files that were burned to them.

Data & Backup

Right-click on a disc and select Disc Info to view information about when the disc

was created and more. To view the content that was burned to the disc in the

library, just double-click on it to view the files. If you want to view a file on the disc,

make sure the disc is in your disc drive and then double-click on the file.

Manually Importing Discs to the Disc

Library

In the Disc Manager you can import discs you created with older versions of

CyberLink Power2Go or burned in other programs.

To import a disc into the Disc Manager library, do this:

1. In the Disc Manager window, click . The Import Disc window opens.

2. Insert the disc you want to import into your disc drive, and then click OK.

CyberLink Power2Go will load the disc and then display the Disc Info window.

3. If required, click on to add a label snapshot to help you identify the

disc in the Disc Manager library. See Editing the Disc Label Snapshot for more

information.

Note: you must have a webcam or other video device attached your computer

to take the label snapshot.

4. If required, click on Edit Tags to add keyword search tags to the disc. See

Adding Tags to Discs for more information.

5. Click OK to close the window and add the disc into the Disc Manager library.

Disc Label Snapshots

Disc label snapshots are photos that help you identify the disc in the Disc Manager

library. If you created a disc label using CyberLink LabelPrint, it is automatically

imported and used as the label snapshot in the Disc Manager.

You can edit the captured label snapshot or add a new one by taking a photo of

hand drawn text on the disc, drawings, or whatever you want and use it as the label

snapshot.

CyberLink Media Suite Help

Editing the Disc Label Snapshot

To edit the disc label snapshot, do this:

1. If in the Disc Info window, click the button to open the Capture Label

Snapshot window.

2. If required, select the device you want to use to capture the snapshot from the

drop-down.

3. Hold the disc or other item up to your webcam and then click . If you

don't like the snapshot that was taken, you can recapture it by repeating this

step.

4. Once you are satisfied with the label snapshot, click on Done.

Adding Tags to Discs

Keyword search tags are used to help you find discs in the Disc Manager library.

You can easily filter or search for these tags to help you find the discs.

To add tags to discs, do this:

1. If in the Disc Info window, click the Edit Tags button to open the Edit Tag

window.

2. If required, add any of the existing tags by selecting the check box next to

them.

3. To add a new tag, enter the new tag name in the field provided and then click

on .

4. Once you are done selecting and adding all the tags, click on OK to save the

changes.

Utilities

Chapter 7:

CyberLink Media Suite provides you with a number of useful disc utilities, including

the ability to erase rewritable discs and also design and print professional looking

labels using CyberLink LabelPrint to complete the disc making process.

You can also mount a disc image, extract files from existing disc images, burn a

DVD folder, and much more.

Note: for a more detailed description of these programs and there functions,

please consult the product help files.

Erase a Disc

If you are using a re-writable disc, you can erase content that was previously

recorded onto it. This allows you to reuse the same discs over and over without the

need to continually buy new discs.

To erase a disc, do this:

1. Select Erase a Disc function within in the Utilities menu of CyberLink

PowerStarter window. The Erase Rewritable Media window displays.

2. Insert your disc and select your Burner from the drop-down.

3. Select one of the following erase methods:

·Quick erase: erases the disc index contained on the disc.

·Full erase: erases all of the content the disc contains.

4. Click Erase to start the erase process.

Extract Files From a Disc Image

With CyberLink Power2Go you can use the CyberLink ISO Viewer to view disc

images in the ISO, P2I (Power2Go image) or RDF format on your computer’s hard

drive. This convenient tool lets you view the contents of an image file, and quickly

extract files or burn the image to a disc.

To extract files from a disc image, do this:

CyberLink Media Suite Help

1. Select Extract Files from a Disc I mage function within in the Utilities menu of

CyberLink PowerStarter. The CyberLink ISO Viewer displays.

2. When in the CyberLink ISO Viewer, you can perform the following functions:

·click the button to browse to and open an image file (in the ISO, P2I or

RDF format) on your computer. When opened, you can see all the files

contained within the image.

Note: to change the view of the files in the CyberLink ISO Viewer, click .

·click on a file in the CyberLink ISO Viewer and then click to view it in its

default program.

·to extract files from the image and save them to your computer, select them

and then click .

Mount a Virtual Drive

The Power2Go Virtual Drive lets you mount a disc image file and access it as if it is a

real disc drive on your computer.

To mount a disc image using the Power2Go Virtual Drive, do this:

1. Select Mount a Virtual Drive function within in the Utilities menu of CyberLink

PowerStarter window. The Power2Go Virtual Drive window displays.

2. Select the Enable virtual drive option.

3. In the Im age loc ation field, click and select the location of the image

you want to mount. CyberLink Power2Go supports the mounting of images in

the ISO, P2I (Power2Go image) or RDF formats.

4. Assign a Drive letter for the mounted disc image, by selecting it from the

drop-down. The drive letter you assign will be how you identify the mounted

drive in Windows Explorer.

5. Click on OK to mount the drive. The disc image will be available like any other

disc drive in Windows Explorer.

Utilities

Note: the disc image stays mounted as a drive until you disable it, even if

you reboot your computer.

Transfer Media to Devices

After converting media to another format, CyberLink MediaEspresso will transfer it

automatically to a device that is connected via a USB cable. To convert media and

transfer it to a device, select the Transfer Media to Devices function within the

Utilities menu of CyberLink PowerStarter. The CyberLink MediaEspresso program

opens.

Note: for a more detailed description of this program and its functions,

please consult the product's help file.

To transfer media, during the conversion process, ensure that the Transfer to

connected device after conversion option is selected and that your device is

connected to your computer. The converted media will be transferred to your

device once the conversion is complete.

Burn a DVD Folder

If you have created a DVD folder you can burn this folder to a disc for storage.

To burn a disc from a DVD folder, do this:

1. Select Burn a DVD Folder function within in the Utilities menu of CyberLink

PowerStarter. The Burn Disc from Folder window of CyberLink PowerProducer

displays.

2. Insert your disc and select your drive.

3. Click to select the folder you want to burn to a disc.

4. Click Start to begin. CyberLink PowerProducer will burn the folder to the disc.

5. Click Close to return to the Disc Utilities window.

Print a Disc Label

CyberLink LabelPrint offers a wide variety of layout formats and supports a number

of printing options, including printing directly on your disc using LightScribe and

CyberLink Media Suite Help

Labelflash technologies.

Note: for a more detailed description of this application and its functions,

please consult the product's help file.

To begin creating a label, select Print a Disc Label function within in the Utilities

menu of CyberLink PowerStarter.

Step 1 - Select a Label Type

The first step in creating a label is to select the type of label you want to print. You

can select to create LightScribe label, Labelflash label, a disc label, a mini disc label,

a front cover, back cover or a disc inlay.

Step 2 - Edit Disc Information

Add or edit disc information, such as a title, which will allow you to recognize the

disc. Add or edit the content list information to keep track of which files you have

added to the disc. You can add or edit this information on the Edit Disc Information

page.

Step 3 - Edit Layout

By selecting a layout, modifying the fonts, and using a custom background image,

you can create a more personalized disc label. You can:

·select a label layout.

·add a background image.

·add or modify text.

Step 4 - Print

You are now ready to print your label with CyberLink LabelPrint. You can print on

one of the following media:

·Plain paper: Allows you to print on any sheet of paper your printer supports.

·Label paper: Provides labels for easy printing.

·Directly onto your disc: Does away with paper labels, but requires a special

LightScribe or Labelflash burning drive and disc.

CyberLink Mobile Apps

Chapter 8:

CyberLink Media Suite also includes direct access to the award-winning mobile

apps for your Android, iOS, and Windows devices. Click the button to view

all the available apps, and on each app icon to view a description, and get access to

the QR codes and download links for each of them. Installing these free mobile

apps will allow you to unleash your inner creativity and playfulness to smartly

capture and vividly express every important detail of your digital life.

CyberLink Media Suite Help

Technical Support

Chapter 9:

If you require technical support, then this chapter can help. It includes all the

information you need to find the answers you are looking for. You may also find

answers quickly by contacting your local distributor/dealer.

Before Contacting Technical

Support

Before contacting CyberLink technical support, please take advantage of one or

more of the following free support options:

·consult the user’s guide or the online help installed with your program.

·refer to the Knowledge Base at the following link on the CyberLink web site:

http://www.cyberlink.com/support/search-product-result.do

·check the Help Resources page in this document.

When contacting technical support by e-mail or phone, please have the following

information ready:

·registered pr oduct k ey (your product key can be found on the software disc

envelope, the box cover, or in the e-mail received after you purchased

CyberLink products on the CyberLink store).

·the product name, version and build number, which generally can be found

by clicking on the product name image on the user interface.

·the version of Windows installed on your system.

·list of hardware devices on your system (capture card, sound card, VGA card)

and their specifications. For fastest results, please generate and attach your

system info using the DxDiag.txt.

Note: here are the steps to generate the system info DxDiag.txt file: Click

Windows (start) button, and then search for "dxdiag". Click Save All

Information button to save the DxDiag.txt file.

·the wording of any warning messages that were displayed (you may want to

write this down or take a screen capture).

Technical Support

·a detailed description of the problem and under what circumstances it

occurred.

Web Support

Solutions to your problems are available 24 hours a day at no cost on the CyberLink

web site:

Note: you must first register as a member before using CyberLink web

support.

CyberLink provides a wide range of web support options, including FAQs, in the

following languages:

Language

Web Support URL

English

http://www.cyberlink.com/cs-help

Traditional Chinese

http://tw.cyberlink.com/cs-help

Japanese

http://jp.cyberlink.com/cs-help

Spanish

http://es.cyberlink.com/cs-help

Korean

http://kr.cyberlink.com/cs-help

Simplified Chinese

http://cn.cyberlink.com/cs-help

German

http://de.cyberlink.com/cs-help

French

http://fr.cyberlink.com/cs-help

Italian

http://it.cyberlink.com/cs-help

Help Resources

The following is a list of help resources that may assist you when using any of

CyberLink's products.

·Access CyberLink's Know ledge base and FAQ (frequently asked questions):

http://www.cyberlink.com/cs-resource

·View video tutorials for your software: http://directorzone.cyberlink.com/

tutorial/

CyberLink Media Suite Help

·Ask questions and get answers from our users on the CyberLink Community

Forum: http://forum.cyberlink.com/forum/forums/list/ENU.page

Note: CyberLink’s user community forum is only available in English and

German.

Index

converting 2D to 38

enabling 18

movie playback 13

photos 38

requirements 7

video file playback 27

Apps 91

Audio

converting 68

effects 74, 75

equalizer 67

playing back 63

presets 67

recording 70

ripping to hard drive 68

supported formats 64

AVCHD

burning 36

Back Up

data 80

files 80

Blu-ray Discs

3D playback 18

burning 36

folders 22

playing back 10

pop-up menu 12

Brightness

TrueTheater 17

Burn

data discs 77

DVD folder 89

editing a disc after 36

movie discs 36

music disc 69

CDs

burning 69

playing back 63

ripping audio 68

Convert

audio 68

videos 35

Copy

discs 78

movie DVD 83

Data

backing up 80

burning disc 77

CyberLink Media Suite Help

Data

restoring 82

Denoise 17

Digital zoom 14, 26

DirectorZone 56

Disc Manager 84

importing discs 85

tags 86

Discs

3D playback 13

burning 36

copying 78

creating 36

digital zoom 14

editing 36

erasing 87

label snapshot 85

playback controls 11

playing back 10

ripping 68

supported formats 11

tagging 86

DVD folder

burning 89

playing back 22

DVDs

3D playback 18

burning 36, 69

playing back 10

slideshow disc 55

Effects

audio 74, 75

audio presets 66

importing 74

photos 46

Equalizer 66, 67

Erase

discs 87

Extract

file from image 87

Facebook 34, 59

Faces

tagging 41

Favorites

Media Suite functiions 5

photos 44

programs 5

videos 31

Flickr 59

Folders

burning 89

playing back 20

Gallery disc

burning 53

Help 93

Index

Import

audio effects 74

photos 39, 60

videos 29

Instant preview 25

Instant seek 25

Instant thumbnails 12

Instant zoom 14, 26

LabelPrint 89

Labels

snapshot 85

Language 6

Manage

photos 39

videos 30

MediaEspresso 35, 89

MediaShow 30, 32, 34, 38, 39, 45,

48, 55, 58

MoovieLive 22

Movie files

playback controls 24

playing back 20

supported formats 21

Movies

3D playback 13

creating discs 36

information 22

playback controls 11

playing back 10

Music

burning disc 69

equalizer 66

playback controls 64

playing back 63

ripping to hard drive 68

Noise reduction 17

PC mode 10

PhotoDirector 60

PhotoDirector Mobile 91

Photos 45

advanced adjustments 60

converting to 3D 38

editing 45

effects 46

fixing 45

gallery discs 53

importing 39, 60

managing 39

printing 47

slideshow disc 55

uploading 58

Play back 63

audio 63

CyberLink Media Suite Help

Play back 63

movies 10

music 63

photo slideshows 48

videos 23

Play speed navigator 19

Plugins

audio effects 74

Pop-up menu 12

Power Media Player 91

Power2Go 53, 68, 68, 69, 77, 87,

87, 88

PowerBackup 80

PowerDirector 29

PowerDirector Mobile 91

PowerDVD 10, 63

PowerDVD Copy 83

PowerDVD Remote 91

PowerProducer 36, 36, 89

Preferences 6

disc label 89

photos 47

Record 70

Repeat 66

Restore

data 82

Rip audio 68

Rotate

videos 28

Shuffle 65

Slideshows

creating 48

playing back 48

Stabilizer 18

Supported formats

audio 64

discs 11

movie files 21

videos 24

System requirements 7

Tag faces 41

Tags 86

Technical support 92

Transfer 89

TrueTheater 16

HD 17

TV mode 10

Upload

photos 58

videos 34

Index

Videos

3D playback 18, 27

advanced editng 29

converting 35

digital zoom 26

editing 32

fixing 33

importing 29

managing 30, 30

playback controls 24

playing back 23

rotating 28

supported formats 24

transferring to device 89

trimming 33

uploading 34

WaveEditor 70, 71

Web support 93

YouCam Perfect 91

YouCam Snap 91

YouTube 34

Zoom 14, 26

100

CyberLink Media Suite Help

Index

101

Cyberlink Media Suite Help 14.0 User’s Guide MS14 ENU

Navigation menu

Versions of this User Manual:

Views

Navigation