Dell Latitude 5289 2 In 1 Owner's Manual 12 UG En Us

User Manual: dell Latitude 5289 - Owner's Manual Free User Guide for Dell Tablet and eReader, Manual

Open the PDF directly: View PDF .
Page Count: 50

Download
Open PDF In Browser	View PDF

Latitude 5289 2-in-1
Owner's Manual

Regulatory Model: P29S
Regulatory Type: P29S001

Notes, cautions, and warnings
NOTE: A NOTE indicates important information that helps you make better use of your product.
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.
WARNING: A WARNING indicates a potential for property damage, personal injury, or death.

© 2017 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks
may be trademarks of their respective owners.

2017 - 02
Rev. A00

Contents
1 Working on your computer............................................................................................................................. 6
Safety instructions............................................................................................................................................................. 6
Before working inside your computer..............................................................................................................................6
Turning off your computer — Windows 10..................................................................................................................... 7
After working inside your computer.................................................................................................................................7
2 Removing and installing components............................................................................................................. 8
Screw size list..................................................................................................................................................................... 8
Recommended tools.......................................................................................................................................................... 8
Secure Digital (SD) Card................................................................................................................................................... 8
Removing the Secure Digital (SD) Card....................................................................................................................9
Installing the Secure Digital (SD) Card...................................................................................................................... 9
Subscriber Identity Module (SIM) Card.......................................................................................................................... 9
Removing the micro SIM card or micro SIM card tray............................................................................................ 9
Base cover.......................................................................................................................................................................... 9
Removing the base cover........................................................................................................................................... 9
Installing the base cover............................................................................................................................................. 11
Battery................................................................................................................................................................................ 11
Removing the battery................................................................................................................................................. 11
Installing battery.......................................................................................................................................................... 11
PCIe Solid State Drive (SSD).......................................................................................................................................... 12
Removing the NVMe SSD card................................................................................................................................ 12
Installing the NVMe SSD........................................................................................................................................... 12
WLAN card........................................................................................................................................................................ 13
Removing the WLAN card.........................................................................................................................................13
Installing the WLAN card........................................................................................................................................... 14
WWAN card.......................................................................................................................................................................14
Removing the WWAN card....................................................................................................................................... 14
Installing the WWAN card..........................................................................................................................................14
3 Technology and components........................................................................................................................ 15
Power adapter...................................................................................................................................................................15
Processors......................................................................................................................................................................... 15
Identifying processors in Windows 10...................................................................................................................... 15
Verifying processor usage in task manager............................................................................................................. 16
Verifying processor usage in resource monitor....................................................................................................... 16
Chipset............................................................................................................................................................................... 17
Identifying chipset in device manager on Windows 10...........................................................................................17
Memory features.............................................................................................................................................................. 18
Verifying system memory in setup............................................................................................................................18
Verifying system memory ......................................................................................................................................... 18
Testing memory using ePSA......................................................................................................................................19
Display................................................................................................................................................................................ 19
Contents

Display options............................................................................................................................................................ 19
Identifying display adapter......................................................................................................................................... 19
Changing the screen resolution................................................................................................................................ 19
Connecting to external display devices................................................................................................................... 20
Camera features...............................................................................................................................................................20
Identifying the camera in Device Manager on Windows 10..................................................................................20
Starting the camera...................................................................................................................................................20
Starting the camera application................................................................................................................................ 21
Hard drive..........................................................................................................................................................................22
Storage options.......................................................................................................................................................... 22
Identifying the storage device in the BIOS............................................................................................................. 22
Identifying storage device in Windows 10............................................................................................................... 22
USB features.................................................................................................................................................................... 22
USB 3.0/USB 3.1 Gen 1 (SuperSpeed USB)...........................................................................................................22
Speed...........................................................................................................................................................................23
Applications.................................................................................................................................................................24
Compatibility............................................................................................................................................................... 24
HDMI 1.4............................................................................................................................................................................ 24
HDMI 1.4 Features......................................................................................................................................................25
Advantages of HDMI................................................................................................................................................. 25
4 Technical specifications............................................................................................................................... 26
System specifications......................................................................................................................................................26
Processor specifications................................................................................................................................................. 26
Memory specifications.....................................................................................................................................................27
Video specifications......................................................................................................................................................... 27
Display specifications....................................................................................................................................................... 27
Audio specifications......................................................................................................................................................... 27
Storage options................................................................................................................................................................ 28
Communication specifications........................................................................................................................................28
Near field communication (NFC) specifications.......................................................................................................... 28
Fingerprint reader specifications....................................................................................................................................28
Ports and connector specifications............................................................................................................................... 29
Touchpad specifications..................................................................................................................................................29
Camera specifications..................................................................................................................................................... 29
IR camera specifications................................................................................................................................................. 29
Display specifications.......................................................................................................................................................30
AC adapter specifications............................................................................................................................................... 30
Battery specifications.......................................................................................................................................................31
Physical specifications.....................................................................................................................................................32
Environmental specifications.......................................................................................................................................... 32
5 System setup...............................................................................................................................................34
Boot menu........................................................................................................................................................................ 34
Navigation keys................................................................................................................................................................ 35
System setup options......................................................................................................................................................35
General screen options....................................................................................................................................................35

Contents

System Configuration screen options........................................................................................................................... 36
Video screen options....................................................................................................................................................... 38
Security screen options...................................................................................................................................................38
Secure Boot screen options........................................................................................................................................... 40
Intel software guard extensions screen options...........................................................................................................40
Performance screen options.......................................................................................................................................... 40
Power management screen options...............................................................................................................................41
POST behavior screen options.......................................................................................................................................43
Manageability....................................................................................................................................................................44
Virtualization support screen options............................................................................................................................ 44
Wireless screen options...................................................................................................................................................44
Maintenance screen options.......................................................................................................................................... 45
System logs screen options............................................................................................................................................ 45
Updating the BIOS ..........................................................................................................................................................46
System and setup password...........................................................................................................................................46
Assigning a system password and setup password...............................................................................................46
Deleting or changing an existing system and/or setup password........................................................................47
6 Troubleshooting........................................................................................................................................... 48
Enhanced Pre-Boot System Assessment (ePSA) diagnostics...................................................................................48
Running the ePSA diagnostics................................................................................................................................. 48
Diagnostic LED................................................................................................................................................................. 48
7 Contacting Dell............................................................................................................................................ 50

Contents

1
Working on your computer
Safety instructions
Use the following safety guidelines to protect your computer from potential damage and to ensure your personal safety. Unless otherwise
noted, each procedure included in this document assumes that the following conditions exist:
•

You have read the safety information that shipped with your computer.

•

A component can be replaced or, if purchased separately, installed by performing the removal procedure in reverse order.
WARNING: Disconnect all power sources before opening the computer cover or panels. After you finish working inside the
computer, replace all covers, panels, and screws before connecting to the power source.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional
safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage
due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came
with the product.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an
unpainted metal surface, such as a connector on the back of the computer.
CAUTION: Handle components and cards with care. Do not touch the components or contacts on a card. Hold a card by its
edges or by its metal mounting bracket. Hold a component such as a processor by its edges, not by its pins.
CAUTION: When you disconnect a cable, pull on its connector or on its pull-tab, not on the cable itself. Some cables have
connectors with locking tabs; if you are disconnecting this type of cable, press in on the locking tabs before you disconnect the
cable. As you pull connectors apart, keep them evenly aligned to avoid bending any connector pins. Also, before you connect a
cable, ensure that both connectors are correctly oriented and aligned.
NOTE: The color of your computer and certain components may appear differently than shown in this document.

Before working inside your computer
1

Ensure that your work surface is flat and clean to prevent the computer cover from being scratched.

Turn off your computer.

If the computer is connected to a docking device (docked), undock it.

Disconnect all network cables from the computer (if available).
CAUTION: If your computer has an RJ45 port, disconnect the network cable by first unplugging the cable from your
computer.

Disconnect your computer and all attached devices from their electrical outlets.

Close the display and turn the computer upside-down on a flat work surface.

Remove the base cover.

Remove the main battery.

Turn the computer top-side up.

Open the display.

NOTE: To avoid damaging the system board, you must remove the main battery before you service the computer.

Working on your computer

Press and hold the power button for few seconds, to ground the system board.
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before opening the
display.
CAUTION: Before touching anything inside your computer, ground yourself by touching an unpainted metal surface,
such as the metal at the back of the computer. While you work, periodically touch an unpainted metal surface to
dissipate static electricity, which could harm internal components.

Remove any installed ExpressCards or Smart Cards from the appropriate slots.

Turning off your computer — Windows 10
CAUTION: To avoid losing data, save and close all open files and exit all open programs before you turn off your
computer.

Click or tap

.
and then click or tap Shut down.

NOTE: Ensure that the computer and all attached devices are turned off. If your computer and attached devices did not
automatically turn off when you shut down your operating system, press and hold the power button for about 6 seconds
to turn them off.

After working inside your computer
After you complete any replacement procedure, ensure that you connect external devices, cards, and cables before turning on your
computer.
CAUTION: To avoid damage to the computer, use only the battery designed for this particular Dell computer. Do not use batteries
designed for other Dell computers.
1

Connect any external devices, such as a port replicator or media base, and replace any cards, such as an ExpressCard.

Connect any telephone or network cables to your computer.
CAUTION: To connect a network cable, first plug the cable into the network device and then plug it into the
computer.

Replace the battery.

Connect your computer and all attached devices to their electrical outlets.

Turn on your computer.

Working on your computer

2
Removing and installing components
This section provides detailed information on how to remove or install the components from your computer.

Screw size list
Table 1. Latitude 5289 - Screw size list
Component
Back cover

M2.5 x 5

M2.0 x 2

M2.0 x 3

M 2.0 x 1.7

M 2 2.0 x 2.0

8 (captive screw)

Battery

Heat sink

System fan

WWAN card

WLAN card

Power connector port

EDP bracket
2

Fingerprint reader

Smart card reader cage

LED board

Keyboard support plate

Keyboard

System board

SSD bracket

2 (captive
screws)

Recommended tools
The procedures in this document require the following tools:
•

Phillips #0 screwdriver

•

Phillips #1 screwdriver

•

Plastic scribe

Secure Digital (SD) Card

Removing and installing components

Touchpad buttons

M2.0 x 4L

Removing the Secure Digital (SD) Card
1

Follow the procedure in Before working inside your computer.

Press in on the Micro SD card to release it from the computer.

Slide the Micro SD card out of the computer.

Installing the Secure Digital (SD) Card
1

Slide the Micro SD into the slot until it clicks into place.

Follow the procedures in After working inside your computer.

Subscriber Identity Module (SIM) Card
Removing the micro SIM card or micro SIM card tray
CAUTION: Removing the micro SIM card when the computer is on may cause data loss or damage the card. Ensure that your
computer is turned off or the network connections are disabled.
NOTE: Micro SIM card tray is available only for systems that are shipped with WWAN card.
1

Insert a paperclip or a micro SIM card removal tool into the pinhole on the micro SIM card tray.

Use a scribe to pull the micro SIM card tray.

If a micro SIM card is available, remove the micro SIM card from the micro SIM card tray.

Base cover
Removing the base cover
1

Follow the procedure in Before working inside your computer.

Loosen the M2.5 x 5.0 captive screws that secure the base cover to the computer.

Removing and installing components

Use a plastic scribe to pry the base cover from the recesses and lift the base cover from the computer.
NOTE: The recesses are located near the hinges at the rear side of the computer.

Removing and installing components

Installing the base cover
1

Align the base cover tabs to the slots on the edges of the computer.

Press the edges of the cover until it clicks into place.

Tighten the M2.5 x 5.0 captive screws to secure the base cover to the computer.

Follow the procedure in After working inside your computer.

Battery
Removing the battery
1

Follow the procedure in Before working inside your computer.

Remove:
a
b

MicroSD card
base cover

To remove the battery:
a
b
c

Lift the ribbon and slide the cable to disconnect the battery cable from the connector on the system board [1].
Remove the M2.0 x 4L screws that secure the battery to the computer [2].
Lift the battery from the computer [3].

Installing battery
1

Insert the battery into the slot on the computer.

Connect the battery cable to the connector on the system board.
Removing and installing components

Replace the M 2 x 4L screws to secure the battery to the computer.

Install the:
a
b

base cover
SD card

Follow the procedure in After working inside your computer.

PCIe Solid State Drive (SSD)
Removing the NVMe SSD card
1

Follow the procedure in Before working inside your computer.

Remove:
a
b
c

MicroSD card
base cover
battery
NOTE: You need not remove the battery, instead you can disconnect the battery cable from the system
board.

To remove the NVMe SSD card:
a
b
c

Remove the M2.0 x 3.0 screws that secure SSD thermal bracket [1].
Lift the thermal plate and slide the thermal bracket from the SSD card [2].
Lift the SSD card from the slot on the computer [3].

Installing the NVMe SSD
1

Insert the NVMe SSD card into the connector.

Install the thermal bracket over the SSD card.

Removing and installing components

Replace the M2.0 x 3.0 screws to secure it the SSD thermal bracket.

Install the:
a

battery
NOTE: If you have not removed the battery, you must connect the battery cable to the system board.

b
c
5

base cover
MicroSD card

Follow the procedure in After working inside your computer.

WLAN card
Removing the WLAN card
1

Follow the procedure in Before working inside your computer.

Remove:
a
b
c

MicroSD card
base cover
battery
NOTE: You need not remove battery, instead you can disconnect the battery cable from the system board.

To remove the WLAN card:
a
b
c
d

Remove the M2.0 x 3.0 screw that secures the metal bracket to the WLAN card [1].
Lift the metal bracket [2].
Disconnect the WLAN cables from the connectors on the WLAN card [3].
Remove the WLAN card from the computer [4].

Removing and installing components

Installing the WLAN card
1

Insert the WLAN card into the connector on the system board.

Connect the WLAN cables to the connectors on the WLAN card.

Place the metal bracket and replace the M2.0 x 3.0 screw to secure WLAN card to the computer.

Install the:
a

battery

b
c

base cover
MicroSD card

NOTE: If you have not removed the battery then you must connect the battery cable to the system board.

Follow the procedure in After working inside your computer.

WWAN card
Removing the WWAN card
1

Follow the procedure in Before working inside your computer.

Remove:
a
b
c

MicroSD card
base cover
battery
NOTE: You need not remove the battery, instead you can disconnect the battery cable from the system
board.

To remove the WWAN card:
a
b
c
d

Remove the M2.0 x 3.0 screw that secures the metal bracket to the WWAN card .
Lift the metal bracket that secures the WWAN card .
Disconnect the WWAN cables from the connectors on the WWAN card
Lift the WWAN card from the computer.

Installing the WWAN card
1

Insert the WWAN card into the connector on the system board.

Connect the WWAN cables to the connectors on the WWAN card.

Place the metal bracket and replace the M2.0 x 3.0 screw to secure the WLAN card to the computer.

Install the:
a

battery

b
c

base cover
MicroSD card

NOTE: If you have not removed the battery then you must connect the battery cable to the system board.

Follow the procedure in After working inside your computer.
NOTE: The IMEI number can also be found on the WWAN card.

Removing and installing components

3
Technology and components
This chapter details the technology and components available in the systems.
Topics:
•

Power adapter

•

Processors

•

Chipset

•

Memory features

•

Display

•

Camera features

•

Hard drive

•

USB features

•

HDMI 1.4

Power adapter
This laptop is shipped with 45W or 65W or 90W power adapters.
WARNING: When you disconnect the power adapter cable from the laptop, grasp the connector, not the cable itself, and then
pull firmly but gently to avoid damaging the cable.
WARNING: The power adapter works with electrical outlets worldwide. However, power connectors and power strips vary among
countries. Using an incompatible cable or improperly connecting the cable to the power strip or electrical outlet may cause fire or
equipment damage.

Processors
Latitude 5289 is shipped with any of the following processors:
•

Intel Core i3-7100U processor (3M Cache, 3.90 GHz)

•

Intel Core i5-7200U processor (3M Cache, up to 3.10 GHz)

•

Intel Core i5-7300U processor (3M Cache, up to 3.50 GHz)

•

Intel Core i7-7600U processor (4M Cache, up to 3.90 GHz)
NOTE: The clock speed and performance varies depending on the workload and other variables.

Identifying processors in Windows 10
1

Type Device Manager in Ask me anything field.
The iDevice Manager window is displayed.

Click Processor.
The processor information is displayed.

Technology and components

Figure 1.

Verifying processor usage in task manager
1

Right click on the desktop.

Select Start Task Manager.
The Windows Task Manager window is displayed.

Click the Performance tab in the Windows Task Manager window.

Verifying processor usage in resource monitor
1

Right click the desktop.

Select Start Task Manager.
The Windows Task Manager window is displayed.

Technology and components

Click the Performance tab in the Windows Task Manager window.
The processor performance details are displayed.

Click Open Resource Monitor.

Chipset
The chipset is integrated on the processor.

Identifying chipset in device manager on Windows 10
NOTE: The Chipset information displayed is a generic image and may be different from what is
displayed.
1

Click All Settings

From the Control Panel, select Device Manager.

on the Windows 10 Charms Bar.

Expand System Devices and search for the chipset.

Technology and components

Memory features
Memory is integrated on the system board and it cannot be replaced as a module. Latitude 5289 supports the following memory
configurations:
•

16 G 1866 MHz LPDDR3

•

4 G 1866 MHz LPDDR3

•

8 G 1866 MHz LPDDR3

Verifying system memory in setup
1

Turn on or restart your tabletnotebookdesktop.

Perform one of the following actions after the Dell logo is displayed:

• With keyboard — Tap F2 until the Entering BIOS setup message appears. To enter the Boot selection menu, tap F12.
On the left pane, select Settings > General > System Information,
The memory information is displayed on the right pane.

Verifying system memory
Windows 10
1

Clickthe Windows button and select All Settings

Under System, click About.

Technology and components

> System .

Testing memory using ePSA
1

Turn on or restart your computer.

Perform one of the following actions after the Dell logo is displayed:
•

With keyboard — Press F2.

The PreBoot System Assessment (PSA) starts on your computer.
NOTE: If you wait too long and the operating system logo appears, continue to wait until you see the desktop. Turn off
the computer and try again.

Display
Display section details on identifying the display adapter from the display manager along with steps on how change the screen resolution. It
also contains information about connection multiple monitors.

Display options
This laptop is shipped with 12.5-inch FHD Touch with Corning Gorilla Glass 4 (1920 x 1080) display.

Identifying display adapter
1

Type Device manager in the Ask me anything field.
The Display Manager window is displayed.

Expand the Display adapters.
The display adapter information is displayed.

Figure 2. display adapter

Changing the screen resolution
1

Right click on the desktop and select Display Settings.

Tap or click Advanced display settings.

Select the required resolution from the drop-down list and tap Apply.

Technology and components

Connecting to external display devices
Follow these steps to connect your computer to an external display device:
1

Ensure that the projector is turned on and plug the projector cable into a video port on your computer.

Press the Windows logo+P key.

Select one of the following modes:
•

PC screen only

•

Duplicate

•

Extend

•

Second Screen only
NOTE: For more information, see the document that shipped with your display device.

Camera features
This laptop is shipped with front-facing camera with the image resolution of 1280 x 720 (maximum). Front facing IR camera is also available.
The camera is at the top center of the display.

Identifying the camera in Device Manager on Windows 10
1

In the Search box, type device manager, and tap to start it.

Under Device Manager, expand Imaging devices.

Starting the camera
To start the camera, open an application that uses the camera. For instance, if you tap the Dell webcam central software or the Skype
software that is shipped with the laptop, the camera turns on. Similarly, if you are chatting on the internet and the application requests to
access the webcam, the webcam turns on.

Technology and components

Starting the camera application
1

Tap or click the Windows button and select All apps.

Select Camera from the apps list.

If the Camera App is not available in the apps list, search for it.

Technology and components

Hard drive
This section explains how to identify the hard drive type installed in the system.

Storage options
This laptop supports M.2 SATA SSD and M.2 PCIe NVMe SSDs.

Identifying the storage device in the BIOS
1

Turn on or restart your laptop.

When the Dell logo appears, perform one of the following actions to enter the BIOS setup program:
• With keyboard — Tap F2 until the Entering BIOS setup message appears. To enter the Boot selection menu, tap F12.
• Without keyboard — When the F12 boot selection menu is displayed, use the arrow keys to choose the option to enter BIOS
setup.
Storage device (HDD or SSD type) is listed under the System Information under the General group.

Identifying storage device in Windows 10
1

Type Device Manager in I'm Cortana, Ask me anything field.
The Device Manager window is displayed.

Click Disk Drives.
The storage devices installed in the system are displayed.

USB features
The Universal Serial Bus, or well known as USB was introduced to the PC world in 1996 which dramatically simplified the connection
between host computer and peripheral devices such as mice and keyboards, external hard drive or optical devices, Bluetooth and many
more peripheral devices in the market.
Let's take a quick look on the USB evolution referencing to the table below.
Table 2. USB evolution
Type

Data Transfer Rate

Category

Introduction Year

USB 3.0/USB 3.1 Gen 1

5 Gbps

Super Speed

2010

USB 2.0

480 Mbps

High Speed

2000

USB 1.1

12 Mbps

Full Speed

1998

USB 1.0

1.5 Mbps

Low Speed

1996

USB 3.0/USB 3.1 Gen 1 (SuperSpeed USB)
For years, the USB 2.0 has been firmly entrenched as the de facto interface standard in the PC world with about 6 billion devices sold, and
yet the need for more speed grows by ever faster computing hardware and ever greater bandwidth demands. The USB 3.0/USB 3.1 Gen 1

Technology and components

finally has the answer to the consumers' demands with a theoretically 10 times faster than its predecessor. In a nutshell, USB 3.1 Gen 1
features are as follows:
•

Higher transfer rates (up to 5 Gbps)

•

Increased maximum bus power and increased device current draw to better accommodate power-hungry devices

•

New power management features

•

Full-duplex data transfers and support for new transfer types

•

Backward USB 2.0 compatibility

•

New connectors and cable

The topics below cover some of the most commonly asked questions regarding USB 3.0/USB 3.1 Gen 1.

Speed
Currently, there are 3 speed modes defined by the latest USB 3.0/USB 3.1 Gen 1 specification. They are Super-Speed, Hi-Speed and FullSpeed. The new SuperSpeed mode has a transfer rate of 4.8Gbps. While the specification retains Hi-Speed, and Full-Speed USB mode,
commonly known as USB 2.0 and 1.1 respectively, the slower modes still operate at 480Mbps and 12Mbps respectively and are kept to
maintain backward compatibility.
USB 3.0/USB 3.1 Gen 1 achieves the much higher performance by the technical changes below:
•

An additional physical bus that is added in parallel with the existing USB 2.0 bus (refer to the picture below).

•

USB 2.0 previously had four wires (power, ground, and a pair for differential data); USB 3.0/USB 3.1 Gen 1 adds four more for two pairs
of differential signals (receive and transmit) for a combined total of eight connections in the connectors and cabling.

•

USB 3.0/USB 3.1 Gen 1 utilizes the bidirectional data interface, rather than USB 2.0's half-duplex arrangement. This gives a 10-fold
increase in theoretical bandwidth.

With today's ever increasing demands placed on data transfers with high-definition video content, terabyte storage devices, high megapixel
count digital cameras etc., USB 2.0 may not be fast enough. Furthermore, no USB 2.0 connection could ever come close to the 480Mbps
theoretical maximum throughput, making data transfer at around 320Mbps (40MB/s) — the actual real-world maximum. Similarly, USB
3.0/USB 3.1 Gen 1 connections will never achieve 4.8Gbps. We will likely see a real-world maximum rate of 400MB/s with overheads. At this
speed, USB 3.0/USB 3.1 Gen 1 is a 10x improvement over USB 2.0.

Technology and components

Applications
USB 3.0/USB 3.1 Gen 1 opens up the laneways and provides more headroom for devices to deliver a better overall experience. Where USB
video was barely tolerable previously (both from a maximum resolution, latency, and video compression perspective), it's easy to imagine
that with 5-10 times the bandwidth available, USB video solutions should work that much better. Single-link DVI requires almost 2Gbps
throughput. Where 480Mbps was limiting, 5Gbps is more than promising. With its promised 4.8Gbps speed, the standard will find its way
into some products that previously weren't USB territory, like external RAID storage systems.
Listed below are some of the available SuperSpeed USB 3.0/USB 3.1 Gen 1 products:
•

External Desktop USB 3.0/USB 3.1 Gen 1 Hard Drives

•

Portable USB 3.0/USB 3.1 Gen 1 Hard Drives

•

USB 3.0/USB 3.1 Gen 1 Drive Docks & Adapters

•

USB 3.0/USB 3.1 Gen 1 Flash Drives & Readers

•

USB 3.0/USB 3.1 Gen 1 Solid-state Drives

•

USB 3.0/USB 3.1 Gen 1 RAIDs

•

Optical Media Drives

•

Multimedia Devices

•

Networking

•

USB 3.0/USB 3.1 Gen 1 Adapter Cards & Hubs

Compatibility
The good news is that USB 3.0/USB 3.1 Gen 1 has been carefully planned from the start to peacefully co-exist with USB 2.0. First of all,
while USB 3.0/USB 3.1 Gen 1 specifies new physical connections and thus new cables to take advantage of the higher speed capability of
the new protocol, the connector itself remains the same rectangular shape with the four USB 2.0 contacts in the exact same location as
before. Five new connections to carry receive and transmitted data independently are present on USB 3.0/USB 3.1 Gen 1 cables and only
come into contact when connected to a proper SuperSpeed USB connection.
Windows 8/10 will be bringing native support for USB 3.1 Gen 1 controllers. This is in contrast to previous versions of Windows, which
continue to require separate drivers for USB 3.0/USB 3.1 Gen 1 controllers.
Microsoft announced that Windows 7 would have USB 3.1 Gen 1 support, perhaps not on its immediate release, but in a subsequent Service
Pack or update. It is not out of the question to think that following a successful release of USB 3.0/USB 3.1 Gen 1 support in Windows 7,
SuperSpeed support would trickle down to Vista. Microsoft has confirmed this by stating that most of their partners share the opinion that
Vista should also support USB 3.0/USB 3.1 Gen 1.
Super-Speed support for Windows XP is unknown at this point. Given that XP is a seven-year-old operating system, the likelihood of this
happening is remote.

HDMI 1.4
This topic explains the HDMI 1.4 and its features along with the advantages.
HDMI (High-Definition Multimedia Interface) is an industry-supported, uncompressed, all-digital audio/video interface. HDMI provides an
interface between any compatible digital audio/video source, such as a DVD player, or A/V receiver and a compatible digital audio and/or
video monitor, such as a digital TV (DTV). The intended applications for HDMI TVs, and DVD players. The primary advantage is cable
reduction and content protection provisions. HDMI supports standard, enhanced, or high-definition video, plus multichannel digital audio on
a single cable.
NOTE: The HDMI 1.4 will provide 5.1 channel audio support.

Technology and components

HDMI 1.4 Features
•

HDMI Ethernet Channel - Adds high-speed networking to an HDMI link, allowing users to take full advantage of their IP-enabled
devices without a separate Ethernet cable

•

Audio Return Channel - Allows an HDMI-connected TV with a built-in tuner to send audio data "upstream" to a surround audio system,
eliminating the need for a separate audio cable

•

3D - Defines input/output protocols for major 3D video formats, paving the way for true 3D gaming and 3D home theater applications

•

Content Type - Real-time signaling of content types between display and source devices, enabling a TV to optimize picture settings
based on content type

•

Additional Color Spaces - Adds support for additional color models used in digital photography and computer graphics

•

4 K Support - Enables video resolutions far beyond 1080p, supporting next-generation displays that will rival the Digital Cinema systems
used in many commercial movie theaters

•

HDMI Micro Connector - A new, smaller connector for phones and other portable devices, supporting video resolutions up to 1080p

•

Automotive Connection System - New cables and connectors for automotive video systems, designed to meet the unique demands of
the motoring environment while delivering true HD quality

Advantages of HDMI
•

Quality HDMI transfers uncompressed digital audio and video for the highest, crispest image quality.

•

Low -cost HDMI provides the quality and functionality of a digital interface while also supporting uncompressed video formats in a
simple, cost-effective manner

•

Audio HDMI supports multiple audio formats from standard stereo to multichannel surround sound

•

HDMI combines video and multichannel audio into a single cable, eliminating the cost, complexity, and confusion of multiple cables
currently used in A/V systems

•

HDMI supports communication between the video source (such as a DVD player) and the DTV, enabling new functionality

Technology and components

4
Technical specifications
NOTE: Offerings may vary by region. The following specifications are only those required by law to ship with your computer. For
more information about the configuration of your computer, go to Help and Support in your Windows operating system and
select the option to view information about your computer.

Topics:
•

System specifications

•

Processor specifications

•

Memory specifications

•

Video specifications

•

Display specifications

•

Audio specifications

•

Storage options

•

Communication specifications

•

Near field communication (NFC) specifications

•

Fingerprint reader specifications

•

Ports and connector specifications

•

Touchpad specifications

•

Camera specifications

•

IR camera specifications

•

Display specifications

•

AC adapter specifications

•

Battery specifications

•

Physical specifications

•

Environmental specifications

System specifications
Feature

Specification

Chipset

Integrated in the processor

DRAM bus width

64-bit

Flash EPROM

SPI 128 Mbits

PCIe bus

100 MHz

Processor specifications
Feature
Types

Specification
•

7th generation Intel Core i3-7100U Processor (up to 2.4GHz, 3M cache, 15W)

•

7th generation Intel Core i5-7200U Processor (up to 3.1GHz, 3M cache, 15W)

Technical specifications

Feature

Specification
•

7th generation Intel Core i5-7300U Processor (up to 3.5GHz, 3M cache, 15W), vPro

•

7th generation Intel Core i7-7600U Processor (up to 3.9GHz, 4M cache, 15W), vPro

Memory specifications
Feature

Specification

Memory capacity

up to 16 GB (on board)

Memory type

LPDDR3 SDRAM—1866 MHz

Video specifications
Feature

Specification

Type

Integrated on system board

Unified Memory
Architecture
controller

Intel HD Graphics 620

External display
support

•

On system – eDP (internal display), HDMI 1.4, Type-C port

•

Optional – Type-C port with VGA, Type-C port with DVI

Display specifications
Feature

Specification

Type

12.5–inch Touch with corning gorilla glass 4, active pen support, anti-reflective and anti-smudge

Luminance

255 nits (typical)

Diagonal

317.5 mm (12.5 inches)

Native resolution

1920x1080

Refresh rate

60 Hz

Maximum viewing
angles—horizontal

80/-80 degrees

Maximum viewing
angles—vertical

80/-80 degrees

Pixel pitch

FHD 0.144 mm

Audio specifications
Feature

Specification

Types

Four-channel high-definition audio

Controller

Waves MaxxAudio Pro

Stereo conversion

16/20/24-bit—analog-to-digital and digital-to-analog

Internal interface

High-definition audio

Technical specifications

Feature

Specification

External interface

Microphone-in, stereo headphones, and universal audio jack

Speakers

Two

Internal speaker
amplifier

2 W (RMS) per channel

Volume controls

Hot keys

Storage options
Feature
Storage options

Specification
•

M.2 128 GB/256 GB/360 GB SATA SSD

•

M.2 256 GB/512 GB/1 TB PCIe NVMe SSD

•

M.2 256 GB/512 GB PCIe NVMe SED

•

M.2 128 GB/256 GB secondary PCIe SSD (in WWAN slot)

Communication specifications
Features

Specification

Wireless

Internal wireless local area network (WLAN), wireless wide area network (WWAN), WiGig
•

Bluetooth 4.1 LE

•

Bluetooth 4.2 (Intel)

Near field communication (NFC) specifications
Feature

Specification

Type

Broadcom BCM58102 NFC controller

NFC Standard

ISO/IEC 18092, ISO/IEC 21481,ISO/IEC 14443 Type A, B, and B', Japanese Industrial Standard (JIS) (X) 6319-4,
and ISO/IEC 15693 standards

Support NFC Card

NFC Forum Type1 / Type 2 / Type 3 / Type 4 ; ISO/IEC 14443-4 stands-based PICC; ISO/IEC 15693 stands-based
VICC ; ISO/IEC 18000-3 ; Kovio

Temperature
(operating)

0° to 70° C

Humidity

<85% under operation (at operating temperature)

Fingerprint reader specifications
Feature

Specification

Sensor technology

Active thermal

Sensor resolution

385 dpi

Sensor size

12.8 mm x 12.8 mm

Sensor pixel size

180x180 pixels

Technical specifications

Ports and connector specifications
Feature
Audio

Video
USB

Specification
•

Universal audio jack

•

Volume buttons

HDMI 1.4
•

One USB 3.1 Gen 1

•

One USB 3.1 Gen 1 with PowerShare

•

Two USB 3.1 Gen 1 with Type-C

Memory card reader Micro SD 4.0
Universal Subscriber One
Identity Module
(uSIM) card-WWAN
Docking port

USB Type-C docking

Express Card

None

Touchpad specifications
Feature
Active area

Multi-touch

Specification
•

X-axis - 90.5 mm (3.56 inches)

•

Y-axis - 50.0 mm (1.97 inches)

Configurable single finger and multi-finger gestures

Camera specifications
Feature

Specification

Type

HD fixed focus

Sensor type

CMOS sensor technology

Imaging rate

Up to 30 frames per second

Video Resolution

1280 x 720 pixels

IR camera specifications
Feature

Specification

Type

VGA IR camera

Sensor type

CMOS sensor

Resolution: Motion
Video

Win Hello Recognition

Imaging Rate

up to 15- fps
Technical specifications

Display specifications
Feature

Specification

Type

12.5–inch Touch with corning gorilla glass 4, active pen support, anti-reflective and anti-smudge

Luminance

255 nits (typical)

Diagonal

317.5 mm (12.5 inches)

Native resolution

1920x1080

Refresh rate

60 Hz

Maximum viewing
angles—horizontal

80/-80 degrees

Maximum viewing
angles—vertical

80/-80 degrees

Pixel pitch

FHD 0.144 mm

AC adapter specifications
Feature

Specification

Type

45 W, 65 W, 90 W with USB Type-C

Input voltage

100 V AC to 240 V AC

Input current—
maximum

1.3 A/1.5 A/1.7 A

Input frequency

50 Hz to 60 Hz

Output current—45
•
W
•

20V/2.25A (Continuous)

Output current—65
•
W
•

20V/3.25A (Continuous)

5.0V/2A (Continuous)

15V/3A (Continuous)

•

9V/3A (Continuous)

•

5V/3A (Continuous)

Output current—90
•
W
•

20V/4.5A (Continuous)
15V/3A (Continuous)

•

9V/3A (Continuous)

•

5V/3A(Continuous)

Rated output
voltage—45 W

20 V DC/5 V DC

Rated output
voltage—65 W and
90 W

20 V DC/15 V DC/9 V DC/5 V DC

Weight

•

45 W—0.17 kg (0.37 lb)

•

65 W —0.216 kg (0.476 lb)

Technical specifications

Feature

Dimensions—45 W

Dimensions—65 W

Dimensions—90W

Specification
•

90 W—0.291 kg (0.641 lb)

•

Height—22 mm (0.87 inch)

•

Width—55 mm (2.17 inches)

•

Depth—87 mm (3.42 inches)

•

Height—99 mm (3.90 inches)

•

Width—66 mm (2.60 inches)

•

Depth—22 mm (0.87 inch)

•

Height-130 mm (5.12 inches)

•

Width-66 mm (2.60 inches)

•

Depth-22 mm (0.87 inch)

Temperature range
—Operating

0°C to 40°C (32°F to 104°F)

Temperature range
—Non-Operating

–40°C to 70°C (–40°F to 158°F)

Battery specifications
Feature
Type

Specification
•

45 WHr Polymer Battery with ExpressCharge

•

60 WHr Polymer Battery with ExpressCharge

•

60 WHr Long Life Cycle Polymer Battery

45 WHr Polymer
Battery with
ExpressCharge :
Length

238 mm (9.37 inches)

Width

97.2 mm (3.82 inches)

Height

4.7 mm (0.19 inch)

Weight

220 g (0.48 lb)

Voltage

11.4 VDC

Life span

300 discharge per charge cycles

60 WHr Polymer
Battery with
ExpressCharge:
Length

238 mm (9.37 inches)

Width

95.9 mm (3.78 inch)

Height

5.7 mm (0.22 inch)

Weight

270 g (0.6 lb)

Technical specifications

Feature

Specification

Voltage

7.6 VDC

Life span

300 discharge per charge cycles

60 WHr Long Life
Cycle Polymer
Battery:
Length

238 mm (9.37 inches)

Width

95.9 mm (3.78 inch)

Height

5.7 mm (0.22 inch)

Weight

270 g (0.6 lb)

Voltage

7.6 VDC

Life span

300 discharge per charge cycles

Temperature range
Operating

•

Charge: 0°C to 50°C (32°F to 122°F)

•

Discharge: 0°C to 70°C (32°F to 158°F)

Non-operating

- 20°C to 65°C (- 4°F to 149°F)

Coin cell battery

3 V CR2032 lithium coin cell

Physical specifications
Feature

Specification

Front height

0.47 inches (12.03 mm)

Back height

0.73 inches (18.45 mm)

Width

12.00 inches (304.8 mm)

Depth

8.26 inches (210.0 mm)

Weight

2.97 lb (1.34 kg)

Environmental specifications
Temperature

Specifications

Operating

0°C to 60°C (32°F to 140°F)

Storage

–40 °C to 65 °C (-40 °F to 149 °F)

Relative humidity Specifications
—maximum
Operating

20 % to 80 % (non-condensing)

Storage

5% to 95% (non-condensing)

Technical specifications

Altitude—
maximum

Specifications

Operating

0 m to 3048 m (0 to 10,000 ft)
0° to 40°C (32° to 104°F)

Non-operating

0 m to 10668 m (0 to 35,000 ft)

Airborne
contaminant level

G2 or lower as defined by ISA S71.04–1985

Technical specifications

5
System setup
System Setup enables you to manage your tabletdesktopnotebook hardware and specify BIOS level options. From the System Setup, you
can:
•

Change the NVRAM settings after you add or remove hardware

•

View the system hardware configuration

•

Enable or disable integrated devices

•

Set performance and power management thresholds

•

Manage your computer security

Topics:
•

Boot menu

•

Navigation keys

•

System setup options

•

General screen options

•

System Configuration screen options

•

Video screen options

•

Security screen options

•

Secure Boot screen options

•

Intel software guard extensions screen options

•

Performance screen options

•

Power management screen options

•

POST behavior screen options

•

Manageability

•

Virtualization support screen options

•

Wireless screen options

•

Maintenance screen options

•

System logs screen options

•

Updating the BIOS

•

System and setup password

Boot menu
Press when the Dell™ logo appears to initiate a one-time boot menu with a list of the valid boot devices for the system. Diagnostics
and BIOS Setup options are also included in this menu. The devices listed on the boot menu depend on the bootable devices in the system.
This menu is useful when you are attempting to boot to a particular device or to bring up the diagnostics for the system. Using the boot
menu does not make any changes to the boot order stored in the BIOS.
The options are:
•

Legacy Boot:
•

Internal HDD

System setup

•

Onboard NIC

•

USB optical drive (if available)

UEFI Boot:
•

•

Windows Boot Manager

Other Options:
•

BIOS Setup

•

BIOS Flash Update

•

Diagnostics

•

Change Boot Mode Settings

Navigation keys
NOTE: For most of the System Setup options, changes that you make are recorded but do not take effect until you restart the
system.

Keys

Navigation

Up arrow

Moves to the previous field.

Down arrow

Moves to the next field.

Enter

Selects a value in the selected field (if applicable) or follow the link in the field.

Spacebar

Expands or collapses a drop‐down list, if applicable.

Tab

Moves to the next focus area.
NOTE: For the standard graphics browser only.

Esc

Moves to the previous page until you view the main screen. Pressing Esc in the main screen displays a message
that prompts you to save any unsaved changes and restarts the system.

Displays the System Setup help file.

System setup options
NOTE: Depending on the tabletnotebook and its installed devices, the items listed in this section may or may not appear.

General screen options
This section lists the primary hardware features of your computer.

Option

Description

System Information This section lists the primary hardware features of your computer.
•

System Information: Displays BIOS Version, Service Tag, Asset Tag, Ownership Tag, Ownership Date,
Manufacture Date, Express Service Code, the Signed Firmware update—enabled by default

•

Memory Information: Displays Memory Installed, Memory Available, Memory Speed, Memory Channels Mode,
Memory Technology, DIMM ASize, DIMM B Size,

•

Processor Information: Displays Processor Type, Core Count, Processor ID, Current Clock Speed, Minimum
Clock Speed, Maximum Clock Speed, Processor L2 Cache, Processor L3 Cache, HT Capable, and 64-Bit
Technology

•

Device Information: Displays M.2 SATA, M.2 PCIe SSD-0, LOM MAC Address, Passthrough MAC address,
Video Controller, Video BIOS Version, Video Memory, Panel Type, Native Resolution, Audio Controller, Wi-Fi
Device, WiGig Device, Cellular Device, Bluetooth Device

Battery Information Displays the battery status health and whether the AC adapter is installed.

System setup

Option

Description

Boot Sequence

Allows you to change the order in which the computer attempts to find an operating system.

Boot sequence
options

Boot list options

•

Diskette Drive

•

Internal HDD

•

USB Storage Device

•

CD/DVD/CD-RW Drive

•

Onboard NIC

•

Windows boot manager

•

WindowsIns

•

Legacy

•

UEFI—selected by default

Advanced Boot
Options

This option allows you the legacy option ROMs to load. By default, the Enable Legacy Option ROMs is disabled.
Enable Attempt Legacy Boot is disabled by default.

UEFI boot path
security

•

Always, except internal HDD

•

Always

•

Never

Date/Time

Allows you to change the date and time.

System Configuration screen options
Option

Description

SATA Operation

Allows you to configure the internal SATA hard-drive controller. The options are:

Drives

•

Disabled

•

AHCI

•

RAID On: This option is enabled by default.

Allows you to configure the SATA drives on board. All drives are enabled by default. The options are:

SMART Reporting

•

SATA-0

•

M.2 PCI-e SSD-0

•

SATA-2

This field controls whether hard drive errors for integrated drives are reported during system startup. This
technology is part of the SMART (Self-Monitoring Analysis and Reporting Technology) specification. This option is
disabled by default.
•

USB Configuration

Enable SMART Reporting

This is an optional feature.
This field configures the integrated USB controller. If Boot Support is enabled, the system is allowed to boot any
type of USB Mass Storage Devices—HDD, memory key, floppy.
If USB port is enabled, device attached to this port is enabled and available for OS.

System setup

Option

Description
If USB port is disabled, the OS cannot see any device attached to this port.
The options are:
•

Enable Boot Support—enabled by default

•

Enable the Thunderbolt ports

•

Always Allow dell docks—enabled by default

•

Enable External USB Port—enabled by default

•

Enable Thunderbolt Boot Support

•

Enable Thunderbolt (and PCIE behind TBT) Preboot

•

Security level-No security

•

Security level-User configuration

•

Security level-Secure connect

•

Security level- Display port only
NOTE: USB keyboard and mouse always work in the BIOS setup irrespective of these settings.

USB PowerShare

This field configures the USB PowerShare feature behavior. This option allows you to charge external devices using
the stored system battery power through the USB PowerShare port. This option is disabled by default

Audio

This field enables or disables the integrated audio controller. By default, the Enable Audio option is selected. The
options are:

Keyboard
Illumination

•

Enable Microphone—enabled by default

•

Enable Internal Speaker—enabled by default

This field lets you choose the operating mode of the keyboard illumination feature. The keyboard brightness level
can be set from 0% to 100%. The options are:
•

Disabled

•

Dim (50%)

•

Bright—enabled by default

Keyboard Backlight The Keyboard Backlight Timeout dims out with the Battery option. The main keyboard illumination feature is not
Timeout on Battery affected. Keyboard Illumination will continue to support the various illumination levels. This field has an effect when
the backlight is enabled. The options are:
•

5 sec

•

10 sec—enabled by default

•

15 sec

•

30 sec

•

1 min

•

5 min

•

15 min

•

Never

Keyboard Backlight
with AC

The Keyboard Backlight with AC option does not affect the main keyboard illumination feature. Keyboard
Illumination will continue to support the various illumination levels. This field has an effect when the backlight is
enabled. This option is enabled by default.

Keyboard Backlight
Timeout on AC

The Keyboard Backlight Timeout dims out with AC option. The main keyboard illumination feature is not affected.
Keyboard Illumination will continue to support the various illumination levels. This field has an effect when the
backlight is enabled. The options are:

System setup

Option

Description
•

5 sec

•

10 sec—enabled by default

•

15 sec

•

30 sec

•

1 min

•

5 min

•

15 min

•

Never

Touchscreen

It controls whether the screen is enabled or disabled. This option is enabled by default.

Unobtrusive Mode

This option, when enabled, pressing Fn+F7 turns off all light and sound emissions in the system. To resume normal
operation, press Fn+F7 again. This option is disabled by default.

Miscellaneous
Devices

Allows you to enable or disable the following devices:
•

Enable Camera—enabled by default

•

Secure Digital (SD) card—enabled by default

•

Secure Digital (SD) card boot

•

Secure Digital (SD) card read-only-mode

Video screen options
Option

Description

LCD Brightness

Allows you to set the display brightness depending up on the power source—On Battery and On AC. The LCD
brightness is independent for battery and AC adapter. It can be set using the slider.

NOTE: The video setting is visible only when a video card is installed into the system.

Security screen options
Option

Description

Admin Password

Allows you to set, change, or delete the administrator (admin) password.
NOTE: You must set the admin password before you set the system or hard drive password. Deleting
the admin password automatically deletes the system password and the hard drive password.
NOTE: Successful password changes take effect immediately.
Default setting: Not set

System Password

Allows you to set, change, or delete the system password.
NOTE: Successful password changes take effect immediately.
Default setting: Not set

Strong Password

Allows you to enforce the option to always set strong passwords.
Default Setting: Enable Strong Password is not selected.
NOTE: If Strong Password is enabled, the Admin and System passwords must contain at least one
uppercase character, one lowercase character and be at least 8 characters long.

System setup

Option

Description

Password
Configuration

Allows you to specify the minimum and max password lengths of the Administrator and System passwords.

Password Bypass

•

min-4—by default, if you want to change you can increase the number

•

max-32—you can decrease the number

Allows you to enable or disable the permission to bypass the System and the Internal HDD password, when they
are set. The options are:
•

Disabled

•

Reboot bypass

Default setting: Disabled
Password Change

Allows you to enable the disable permission to the System and Hard Drive passwords when the admin password is
set.
Default setting: Allow Non-Admin Password Changes is selected.

Non-Admin Setup
Changes

Allows you to determine whether changes to the setup options are allowed when an Administrator Password is set.
If disabled the setup options are locked by the admin password.
Option "allow wireless switch changes" is not selected by default.

UEFI capsule
firmware updates

This option controls whether the system allows BIOS updates using UEFI capsule update packages. This option is
enabled by default

TPM 2.0 Security

Allows you to enable the Trusted Platform Module (TPM) during POST. The options are:
•

TPM On—enabled by default

•

Clear

•

PPI Bypass for Enable Commands—enabled by default

•

PPI Bypass for Disabled Commands

•

Attestation enable—enabled by default

•

Key storage enable—enabled by default

•

SHA-256—enabled by default

•

Disabled

•

Enabled—enabled by default
NOTE: To upgrade or downgrade TPM 2.0, download the TPM wrapper tool—software.

Computrace

Allows you to activate or disable the optional Computrace software The options are:
•

Deactivate

•

Disable

•

Activate—enabled by default
NOTE: The Activate and Disable options will permanently activate or disable the feature and no further
changes are allowed

CPU XD Support

Allows you to enable the Execute Disable mode of the processor.
Enable CPU XD Support—enabled by default

OROM Keyboard
Access

Allows you to set an option to enter the Option ROM Configuration screens using hotkeys during boot. The options
are:

System setup

Option

Description
•

Enabled—enabled by default

•

One Time Enable

•

Disable

Default setting: Enable
Admin Setup
Lockout

Allows you to prevent users from entering Setup when an Administrator password is set.

Master password
lockout

This option is not enabled by default

Default Setting: This option is enabled

Secure Boot screen options
Option

Description

Secure Boot Enable This option enables or disables the Secure Boot feature.
•

Disabled

•

Enabled

Default setting: Enabled

Intel software guard extensions screen options
Option

Description

Intel SGX Enable

This field specifies you to provide a secured environment for running code/storing sensitive information in the
context of the main OS. The options are:
•

Disabled

•

Enabled

•

Software controlled

Default setting: Software controlled
Enclave Memory
Size

This option allows you to set the SGX Enclave Reserve Memory Size. The options are:
•

32 MB

•

64 MB

•

128 MB—enabled by default

Performance screen options
Option

Description

Multi-Core Support This field specifies whether the process has one or all cores enabled. The performance of some applications
improves with the additional cores. This option is enabled by default. Allows you to enable or disable multi-core
support for the processor. The installed processor supports two cores. If you enable Multi-Core Support, two cores
are enabled. If you disable Multi-Core Support, one core is enabled.
•

System setup

Enable Multi-Core Support

Option

Description
Default setting: The option is enabled.

Intel SpeedStep

Allows you to enable or disable the Intel SpeedStep feature.
•

Enable Intel SpeedStep

Default setting: The option is enabled.
C-States Control

Allows you to enable or disable the additional processor sleep states.
•

C states

Default setting: The option is enabled.
Intel TurboBoost

Allows you to enable or disable the Intel TurboBoost mode of the processor.
•

Enable Intel TurboBoost

Default setting: The option is enabled.
HyperThread
Control

Allows you to enable or disable the Hyper-Threading in the processor.
•

Disabled

•

Enabled

Default setting: Enabled is selected.

Power management screen options
Option

Description

AC Behavior

Allows you to enable or disable the computer from turning on automatically when an AC adapter is connected.
Default setting: Wake on AC is not selected.

Auto On Time

Allows you to set the time at which the computer must turn on automatically. The options are:
•

Disabled

•

Every Day

•

Weekdays

•

Select Days

Default setting: Disabled
USB Wake Support

Allows you to enable USB devices to wake the system from Standby.
NOTE: This feature is only functional when the AC power adapter is connected. If the AC power
adapter is removed during Standby, the system setup removes power from all the USB ports to
conserve battery power.
•

Enable USB Wake Support

•

Wake on Dell USB-C dock

Default setting: The option is disabled.

System setup

Option

Description

Wireless Radio
Control

Allows you to enable or disable the feature that automatically switches from wired or wireless networks without
depending on the physical connection.
•

Control WLAN Radio

•

Control WWAN Radio

Default setting: The options are disabled.
Wake on WLAN

Allows you to enable or disable the feature that powers on the computer from the Off state when triggered by a
LAN signal.
•

Disabled

•

LAN Only

•

WLAN Only

•

LAN or WLAN

Default setting: Disabled
Block Sleep

This option lets you block entering to sleep (S3 state) in operating system environment.
Block Sleep (S3 state)
Default setting: This option is disabled

Peak Shift

Advanced Battery
Charge
Configuration

This option enables you to minimize the AC power consumption during the peak power times of day. After you
enable this option, your system runs only in battery even if the AC is attached.
•

Enable peak shift

•

Set battery threshold (15% to 100%) - 15 % (enabled by default)

This option enables you to maximize the battery health. By enabling this option, your system uses the standard
charging algorithm and other techniques, during the nonwork hours to improve the battery health.
Disabled
Default setting: Disabled

Primary Battery
Charge
Configuration

Allows you to select the charging mode for the battery. The options are:
•

Adaptive—enabled by default

•

Standard—Fully charges your battery at a standard rate.

•

ExpressCharge—The battery charges over a shorter time using Dell’s fast charging technology This option is
enabled by default.

•

Primarily AC use

•

Custom

If Custom Charge is selected, you can also configure Custom Charge Start and Custom Charge Stop.
NOTE: All charging mode may not be available for all the batteries. To enable this option, disable the
Advanced Battery Charge Configuration option.
Sleep mode

•

OS Automatic selection—enabled by default
Force S3

System setup

Option

Description

Type-C connector
power

•

7.5 Watts

•

15 Watts—enabled by default

POST behavior screen options
Option

Description

Adapter Warnings

Allows you to enable or disable the system setup (BIOS) warning messages when you use certain power adapters.
Default setting: Enable Adapter Warnings

Keypad
(Embedded)

Allows you to choose one of two methods to enable the keypad that is embedded in the internal keyboard.
•

Fn Key Only—default.

•

By Numlock
NOTE: When setup is running, this option has no effect. Setup works in Fn Key Only
mode.

Mouse/Touchpad

Numlock Enable

Allows you to define how the system handles mouse and touch pad input. The options are:
•

Serial Mouse

•

PS2 Mouse

•

Touchpad/PS-2 Mouse: This option is enabled by default.

Allows you to enable the Numlock option when the computer boots.
Enable Network. This option is enabled by default.

Fn Key Emulation

Allows you to set the option where the Scroll Lock key is used to simulate the Fn key feature.
Enable Fn Key Emulation (default)

Fn Lock Options

MEBx Hotkey

Allows you to let hot key combinations Fn + Esc toggle the primary behavior of F1–F12, between their standard
and secondary functions. If you disable this option, you cannot toggle dynamically the primary behavior of these
keys. The available options are:
•

Lock Mode Disable/Standard—enabled by default

•

Lock Mode Enable/Secondary

Allows you to specify whether the MEBx Hotkey function should enable, during the system boot.
Default Setting: Enable MEBx Hotkey

Fastboot

Extended BIOS
POST Time

Allows you to speed up the boot process by bypassing some of the compatibility steps. The options are:
•

Minimal

•

Thorough—enabled by default

•

Auto

Allows you to create an extra preboot delay. The options are:
•

0 seconds—enabled by default.

•

5 seconds

System setup

Option

Description

Security audit

Full Screen Log

Warnings and errors

•

10 seconds

•

Disable display of security audit display—not enabled

•

Enable Full Screen Logo—not enabled

•

Prompt on warnings and errors—enabled by default

•

Continue on warnings

•

Continue on warnings and errors

Manageability
Option

Description

MEBX Hotkey

Allows you to specify whether the MEBx Hotkey function should enable, during the system boot.
•

Disabled

•

Enabled

Default setting: Disabled
For USB provision

Enable USB provision is not selected by default

Virtualization support screen options
Option

Description

Virtualization

Allows you to enable or disable the Intel Virtualization Technology.
Enable Intel Virtualization Technology—default.

VT for Direct I/O

Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware capabilities provided
by Intel® Virtualization technology for direct I/O.
Enable VT for Direct I/O - enabled by default.

Trusted Execution

This option specifies whether a Measured Virtual Machine Monitor (MVMM) can utilize the additional hardware
capabilities provided by Intel Trusted Execution Technology. The TPM Virtualization Technology, and the
Virtualization technology for direct I/O must be enabled to use this feature.
Trusted Execution - disabled by default.

Wireless screen options
Option

Description

Wireless Switch

Allows to set the wireless devices that can be controlled by the wireless switch. The options are:

•

WWAN

•

GPS (on WWAN Module)

System setup

Option

Description
•

WLAN/WiGig

•

Bluetooth

All the options are enabled by default.
NOTE: For WLAN and WiGig enable or disable controls are tied together and they cannot be enabled or
disabled independently.
Wireless Device
Enable

Allows you to enable or disable the internal wireless devices.
•

WWAN/GPS

•

WLAN/WiGig

•

Bluetooth

All the options are enabled by default.
NOTE: IMEI number for WWAN can be found ont the outer box or the WWAN card.

Maintenance screen options
Option

Description

Service Tag

Displays the Service Tag of your computer.

Asset Tag

Allows you to create a system asset tag if an asset tag is not already set. This option is not set by default.

BIOS Downgrade

This controls flashing of the system firmware to previous revisions. Option 'Allow BIOS downgrade' is enabled by
default.

Data Wipe

This field allows users to erase the data securely from all internal storage devices. Option 'Wipe on Next boot' is not
enabled by default. The following is list of devices affected:

BIOS Recovery

•

Internal SATA HDD/SSD

•

Internal M.2 SATA SDD

•

Internal M.2 PCIe SSD

•

Internal eMMC

This field allows you to recover from certain corrupted BIOS conditions from a recover file on the user primary hard
drive or an external USB key.
•

BIOS Recovery from Hard Drive—enabled by default

•

Always perform integrity check—disabled by default

System logs screen options
Option

Description

BIOS Events

Allows you to view and clear the System Setup (BIOS) POST events.

Thermal Events

Allows you to view and clear the System Setup (Thermal) events.

Power Events

Allows you to view and clear the System Setup (Power) events.

System setup

Updating the BIOS
It is recommended to update your BIOS (System Setup), on replacing the system board or if an update is available. For laptops, ensure that
your computer battery is fully charged and connected to a power outlet
1

Restart the computer.

Go to Dell.com/support.

Enter the Service Tag or Express Service Code and click Submit.
NOTE: To locate the Service Tag, click Where is my Service Tag?
NOTE: If you cannot find your Service Tag, click Detect My Product. Proceed with the instructions on
screen.

If you are unable to locate or find the Service Tag, click the Product Category of your computer.

Choose the Product Type from the list.

Select your computer model and the Product Support page of your computer appears.

Click Get drivers and click View All Drivers.
The Drivers and Downloads page opens.

On the Drivers and Downloads screen, under the Operating System drop-down list, select BIOS.

Identify the latest BIOS file and click Download File.
You can also analyze which drivers need an update. To do this for your product, click Analyze System for Updates and follow the
instructions on the screen.

Select your preferred download method in the Please select your download method below window, click Download File.
The File Download window appears.

Click Save to save the file on your computer.

Click Run to install the updated BIOS settings on your computer.
Follow the instructions on the screen.
NOTE: It is recommended not to update the BIOS version for more than 3 revisions. For example: If you want to update the BIOS
from 1.0 to 7.0, then install version 4.0 first and then install version 7.0.

System and setup password
You can create a system password and a setup password to secure your computer.

Password type

Description

System password

Password that you must enter to log on to your system.

Setup password

Password that you must enter to access and make changes to the BIOS settings of your computer.

CAUTION: The password features provide a basic level of security for the data on your computer.
CAUTION: Anyone can access the data stored on your computer if it is not locked and left unattended.
NOTE: Your computer is shipped with the system and setup password feature disabled.

Assigning a system password and setup password
You can assign a new System Password only when the status is in Not Set.
NOTE: If the password jumper is disabled, the existing System Password and Setup Password are deleted and you need not
provide the system password to log on to the tabletnotebookdesktop.

System setup

To enter the system setup, press F2 immediately after a power-on or re-boot.
1

In the System BIOS or System Setup screen, select Security and press Enter.
The Security screen is displayed.

Select System Password and create a password in the Enter the new password field.
Use the following guidelines to assign the system password:
•

A password can have up to 32 characters.

•

The password can contain the numbers 0 through 9.

•

Only lower case letters are valid, upper case letters are not allowed.

• Only the following special characters are allowed: space, (”), (+), (,), (-), (.), (/), (;), ([), (\), (]), (`).
Type the system password that you entered earlier in the Confirm new password field and click OK.

Press Esc and a message prompts you to save the changes.

Press Y to save the changes.
The computer reboots.

Deleting or changing an existing system and/or setup
password
Ensure that the Password Status is Unlocked (in the System Setup) before attempting to delete or change the existing System and/or
Setup password. You cannot delete or change an existing System or Setup password, if the Password Status is Locked.
To enter the System Setup, press F2 immediately after a power-on or reboot.
1

In the System BIOS or System Setup screen, select System Security and press Enter.
The System Security screen is displayed.

In the System Security screen, verify that Password Status is Unlocked.

Select System Password, alter or delete the existing system password and press Enter or Tab.

Select Setup Password, alter or delete the existing setup password and press Enter or Tab.
NOTE: If you change the System and/or Setup password, re-enter the new password when promoted. If you delete the
System and/or Setup password, confirm the deletion when promoted.

Press Esc and a message prompts you to save the changes.

Press Y to save the changes and exit from System Setup.
The computer reboots.

System setup

6
Troubleshooting
Enhanced Pre-Boot System Assessment (ePSA)
diagnostics
The ePSA diagnostics (also known as system diagnostics) performs a complete check of your hardware. The ePSA is embedded with the
BIOS and is launched by the BIOS internally. The embedded system diagnostics provides a set of options for particular devices or device
groups allowing you to:
•

Run tests automatically or in an interactive mode

•

Repeat tests

•

Display or save test results

•

Run thorough tests to introduce additional test options to provide extra information about the failed device(s)

•

View status messages that inform you if tests are completed successfully

•

View error messages that inform you of problems encountered during testing
CAUTION: Use the system diagnostics to test only your computer. Using this program with other computers may cause invalid
results or error messages.
NOTE: Some tests for specific devices require user interaction. Always ensure that you are present at the computer terminal
when the diagnostic tests are performed.

Running the ePSA diagnostics
1

Power-on the computer.

As the computer boots, press the F12 key as the Dell logo appears.

On the boot menu screen, select the Diagnostics option.
The Enhanced Pre-boot System Assessment window is displayed, listing all devices detected in the computer. The diagnostics starts
running the tests on all the detected devices.

To run a diagnostic test on a specific device, press Esc and click Yes to stop the diagnostic test.

Select the device from the left pane and click Run Tests.

If there are any issues, error codes are displayed.
Note the error code and contact Dell.

Diagnostic LED
This section details the diagnostic features of the battery LED in a notebook.
Instead of beep codes errors are indicated via the bicolor Battery Charge LED. A specific blink pattern is followed by flashing a pattern of
flashes in amber, followed by white. The pattern then repeats.
NOTE: The diagnostic pattern will consist of a two digit number being represented by a first group of LED blinks (1 through 9) in
amber, followed by a 1.5 second pause with the LED off, and then a second group of LED blinks (1 through 9) in white. This is
then followed by a three second pause, with the LED off, before repeating over again. Each LED blink takes 0.5 seconds.

Troubleshooting

The system will not shutdown when displaying the Diagnostic Error Codes. Diagnostic Error Codes will always supersede any other use of
the LED. For instance, on Notebooks, battery codes for Low Battery or Battery Failure situations will not be displayed when Diagnostic
Error Codes are being displayed:
Table 3. LED pattern
Blinking pattern

Problem Description

Suggested Resolution

Ambe White
r
2

processor

processor failure

system board, BIOS ROM

system board, covers BIOS corruption or ROM error

memory

no memory/no RAM detected

memory

memory failure/RAM failure

memory

invalid memory installed

system board; chipset

system board/ chipset error

display

display failure

RTC power failure

coin-cell battery failure

PCI/Video

PCI/Video card/chip failure

BIOS recovery 1

recovery image nor found

BIOS recovery 2

recovery image found but invalid

Troubleshooting

7
Contacting Dell
NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip,
bill, or Dell product catalog.
Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services
may not be available in your area. To contact Dell for sales, technical support, or customer service issues:
1

Go to Dell.com/support.

Select your support category.

Verify your country or region in the Choose a Country/Region drop-down list at the bottom of the page.

Select the appropriate service or support link based on your need.

Contacting Dell

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Page Count                      : 50
Page Mode                       : UseOutlines
Tagged PDF                      : Yes
Language                        : EN
Title                           : Latitude 5289 2-in-1 Owner's Manual
Author                          : Dell
Subject                         : Owner's Manual
Keywords                        : specifications, disassembly, owner's manual, memory-upgrade, processor specifications, bios settings, removing-real-time-clock, removing-battery, replacing-SSD-module, installing-SD-card, memory-specifications, display-specifications, ports-and-connectors, removing-and-installing-parts, technical-specifications, diagnostics
Creator                         : AH XSL Formatter V6.3 MR3 for Windows (x64) : 6.3.4.25128 (2016/07/01 17:39JST)
Producer                        : Antenna House PDF Output Library 6.3.815 (Windows (x64))
Create Date                     : 2017:02:28 14:09:32+00:00
Modify Date                     : 2017:02:28 14:09:32+00:00
Trapped                         : False

EXIF Metadata provided by EXIF.tools

Dell Latitude 5289 2 In 1 Owner's Manual 12 UG En Us

Navigation menu

Versions of this User Manual:

Views

Navigation