dormakaba Canada RFIDENC1 RFID Encoder User Manual R6

Download:
Mirror Download [FCC.gov]
Document ID	2641221
Application ID	M1sZMPm65Zy9zwVjv4GNCQ==
Document Description	Users Manual R6
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	26.99kB (337357 bits)
Date Submitted	2015-06-09 00:00:00
Date Available	2015-06-09 00:00:00
Creation Date	2015-06-05 10:35:45
Producing Software	Microsoft® Office Word 2007
Document Lastmod	2015-06-05 10:35:45
Document Title	Users Manual R6
Document Creator	Microsoft® Office Word 2007
Document Author:	Dennis Congdon

Installation Instructions: Kaba RFID Encoder
1. Connect the Kaba RFID Encoder to the Server (PC) using the USB or Ethernet
port located on the top of Kaba RFID Encoder. These connections are also used
to power the Encoder.
2. Using the Atlas Software, Go to the main menu and click on “Options” then select
“Encoder”
3. From the list of encoders available in your network, select the one you want your
computer to use as a default. This will be the encoder that will always make
keycards at your workstation unless you return to this page to change it.
4. When you have selected an active encoder, (the right hand LED is green and the
message is “Ready”) click on Apply Selection. The encoder is now set up with
your PC to encode keycards.
Certifications
United States (FCC) and Canada
This device complies with part 15 of the FCC rules,and with Industry Canada’s license-exempt
RSS. Operation is subject to the following conditions:
1. This device may not cause interference.
2. This device must accept any interference received, including interference that may cause
undesired operation
Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
Note:
The non intentional RF portion of this equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules and ICES003. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Cet équipement est conforme à la (aux) norme(s) canadienne(s) d’exemption de licence
RSS Industry Canada. Son opération est sujette aux deux conditions suivantes : (1) cet
équipement ne provoquera aucune interférence et (2) cet équipement doit tolérer toute
interférence pouvant provoquer une opération indésirable de l’équipement.
European Union (CE)
This Class B digital apparatus conforms to the requirements of the following EU directives:
1. R&TTTE Directive (1999/5/EC)
2. WEEE Directive (2012/19/EU)

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 3
Language                        : en-CA
Tagged PDF                      : Yes
Author                          : Dennis Congdon
Creator                         : Microsoft® Office Word 2007
Create Date                     : 2015:06:05 10:35:45-04:00
Modify Date                     : 2015:06:05 10:35:45-04:00
Producer                        : Microsoft® Office Word 2007

EXIF Metadata provided by EXIF.tools