dormakaba EAD KT9600K6L3G data collection terminal User Manual QG 9600 K6 201707 en

dormakaba EAD GmbH data collection terminal QG 9600 K6 201707 en

Users Manual

Download: dormakaba EAD KT9600K6L3G data collection terminal User Manual QG 9600 K6 201707 en
Mirror Download [FCC.gov]dormakaba EAD KT9600K6L3G data collection terminal User Manual QG 9600 K6 201707 en
Document ID3745803
Application IDkcSUHh9QmWBcHSFzfHYOGw==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize100.08kB (1251018 bits)
Date Submitted2018-02-08 00:00:00
Date Available2018-08-01 00:00:00
Creation Date2017-07-21 15:39:40
Producing SoftwareGPL Ghostscript 9.04
Document Lastmod2018-02-01 16:34:40
Document TitleQG_9600-K6_201707_en
Document CreatorPDFCreator Version 1.2.3
Document Author: EmoryLee

Federal Communication Commission (FCC) Radiation Exposure Statement
When using the product, maintain a distance of 20cm from the body to ensure
compliance with RF exposure requirements.
FCC statements:
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference caused
by unauthorized modifications or changes to this equipment. Such modifications or
changes could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
‐ Reorient or relocate the receiving antenna.
‐ Increase the separation between the equipment and receiver.
‐Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
‐Consult the dealer or an experienced radio/TV technician for help.
IC Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Déclaration d'exposition aux radiations:
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies
pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec
un minimum de 20 cm de distance entre la source de rayonnement et votre corps.
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired operation of the device.
IC RF Statement
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions
suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si
le brouillage est susceptible d'en compromettre le fonctionnement.
CE
Operating Frequency:
RFID 13.56MHz Output Power: 41.7dBμV/m,at 3m; -34.8 dBμA/m, at 10m
GSM900
880MHz~960MHz
Output Power:33±2dBm
GSM1800 1710MHz-1880MHz; Output Power: 30±2dBm
WCDMA B1:1920MHz-2170MHz; Max Power:23±2.7dBm
WCDMA B8:880MHz-960MHz; Max Power:23±2.7dBm
WIFI:2400MHz-2483.5MHz; EIRP Power:20dBm
POE standard Input Voltage: 44-57V, Rated Voltage:48V
Temperature: -25~55℃

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : EmoryLee
Create Date                     : 2017:07:21 15:39:40+08:00
Modify Date                     : 2018:02:01 16:34:40+08:00
Subject                         : 
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : EmoryLee
Description                     : 
Title                           : QG_9600-K6_201707_en
Creator Tool                    : PDFCreator Version 1.2.3
Metadata Date                   : 2018:02:01 16:34:40+08:00
Keywords                        : 
Producer                        : GPL Ghostscript 9.04
Document ID                     : uuid:0200aa9a-5c65-4cd0-956c-7eed866aff69
Instance ID                     : uuid:c18e3094-ec5c-4f57-84b6-bbb4d571526f
Page Count                      : 6
EXIF Metadata provided by EXIF.tools
FCC ID Filing: NVI-KT9600K6L3G

Navigation menu