eInstruction GTCO DBIRF916 Meeting Pad, 36080 User Manual InterWrite MP quick start

Download:
Mirror Download [FCC.gov]
Document ID	149743
Application ID	6bceq9/J1tOhbef537j7zQ==
Document Description	Users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	11.3kB (141276 bits)
Date Submitted	2001-05-14 00:00:00
Date Available	2001-05-08 00:00:00
Creation Date	2001-03-06 09:56:19
Producing Software	Acrobat Distiller 4.05 for Windows
Document Lastmod	2001-03-06 09:56:22
Document Title	InterWrite MP quick start
Document Creator	Adobe PageMaker 6.52

Quick start for InterWrite™ MeetingPad
Note: For additional information, see the InterWrite MeetingPad help file on the CD-ROM.
InterWrite MeetingPad is a wireless pen-input tablet system incorporating
GTCO CalComp’s patented technology. MeetingPad consists of a cordless
tablet and cordless pen, with several accessories and a power supply for
recharging. Up to eight MeetingPads communicate wirelessly with a PC
through a small radio receiver attached to the PC.
MeetingPad works with InterWrite Software to enable individual users to
create, view, annotate and share a wide range of visual information.
MeetingPad can also be used with InterWrite MeetingBoard to expand
collaboration to any meeting participant anywhere in the room. In these
various configurations, MeetingPad supports group collaboration ranging
from small, informal meetings to large, multi-site conferences.
Installing MeetingPad
Using MeetingPad
1. Unpack MeetingPad and assure all components are present:
o Tablet
o Recharger
o CD-ROM
o Pen
o Pen batteries
o Pen cord
2. Recharge the tablet for at least 3 hours, or until the BATTERY light on the
tablet goes off:
a. Connect the charger’s cable to the POWER jack on the tablet.
b. Plug the charger into an AC power outlet.
c. When charging is complete, unplug the charger from the power outlet,
then disconnect the charger’s cable from the tablet.
3. Install the pen batteries in the pen:
a. Unscrew pen cap, then
gently slide off pen cover.
b. Insert batteries as
shown here, with “+”
toward pen tip.
c. Replace pen cover,
then screw on pen cap.
Note:
n Up to 8 MeetingPads can communicate with one receiver.
n Each MeetingPad must be within 40 feet (12m) of its intended receiver.
Reception depends on local conditions, and performance may vary in
your facility.
n MeetingPad receivers must be at least 75 feet (23m) apart.
Note: If there is no pen activity for 35 seconds, MeetingPad will enter a
low-power mode to conserve its batteries. To begin using MeetingPad
again, press the ON button or touch the tablet surface with the pen. If
MeetingPad has been idle for an extended period, you may need to press
the ON button.
Batteries
Cap
Cover
Tip
PC
Serial
Y-cable
Receiver
From InterWrite MeetingBoard
or DrawingBoard Interactive
c. If your system includes an InterWrite MeetingBoard or DrawingBoard
Interactive, connect it to the receiver with a 9-pin serial cable.
d. Turn on the computer.
5. Install InterWrite software on your Windows 95/98/ME/NT/2000 PC:
a. Remove all existing graphic tablet drivers from your computer.
b. Insert the MeetingPad CD-ROM into the computer’s CD-ROM drive.
c. Wait for the installation program to launch. Note: If the installation program does not start on its own, launch setup.exe on the CD-ROM.
d. Follow the instructions to install InterWrite.
e. Remove the CD-ROM.
f. Restart the PC. The InterWrite icon should appear in the Taskbar.
Quick start for InterWrite MeetingPad
Note: Only one MeetingPad can link in at a time. If the login window is
displayed, clear it to enable another MeetingPad to link.
To write, draw or interact with the system: Press the pen on MeetingPad’s
surface, then move it across the surface. Simulate mouse button clicks as
shown below.
Left double-click button (same as pressing mouse’s left button twice)
Keyboard
Kybd
To connect MeetingPad to the system: Press MeetingPad’s LINK button,
select a user profile and log in.
User profiles set the default pen color and width, and enable users to be
identified by different cursor shapes. Create and edit user profiles using
the Add/Edit User Profile button.
Note: You can operate the pen without batteries by connecting it to the
tablet with the pen cord. This also keeps the pen tethered to the tablet,
making it less likely to be lost. Instructions are included with the pen.
4. If your system doesn’t have a MeetingPad receiver (available separately),
install one now:
a. Turn off the computer and disconnect the keyboard.
b. Using the Y-cable provided with the receiver, connect the receiver and
the keyboard to the computer (as shown here).
To turn MeetingPad on or off: Press the ON button.
Right click button (same as pressing mouse’s right button)
Tip (same as pressing mouse’s left button)
Tip: Quick start for InterWrite Software contains instructions for using
that product to control the PC, annotate screens, save screens and distribute meeting notes.
37-902834-01

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2001:03:06 09:56:19
Producer                        : Acrobat Distiller 4.05 for Windows
Subject                         : InterWrite MP quick start
Author                          : 
Creator                         : Adobe PageMaker 6.52
Title                           : InterWrite MP quick start
Modify Date                     : 2001:03:06 09:56:22-05:00
Page Count                      : 1

EXIF Metadata provided by EXIF.tools