eInstruction BTLR Bluetooth Module User Manual BTLR MENU new

Download:
Mirror Download [FCC.gov]
Document ID	969826
Application ID	cn85OQq2Fiqj4SQoSUzk/g==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	26.57kB (332081 bits)
Date Submitted	2008-07-14 00:00:00
Date Available	2008-07-14 00:00:00
Creation Date	2008-06-30 18:32:45
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2008-07-11 11:05:52
Document Title	Microsoft Word - BTLR MENU new.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	admin

eInstruction
8224 E Evans Rd
Scottsdale, AZ 85029 USA
Bluetooth ® 2.0, Class I Module – BTLR
OVERVIEW
Highly integration BT 2.0 module, CSR BC04-EXT + Flash Memory + Balun + Filter + X’Tal. +PCB
antenna
Wireless communications module conforming to Bluetooth Version 2.0, Class I.
UART interfaces available to various applications.
BT Chipset
: CSR BC04 External Flash.
Standards
: Bluetooth, Class I, Serial Port Profile.
Frequency
: 2402 ~ 2480 MHz
TX Output Power
: 0dBm (Min.), 6dBm (Max)
RX Sensitivity
: -80dBm (typ)
Range
: > 10m (open space line of site)
Flash Size
: 8MBits
Operation Voltage
: 3.3V
Dimension
: 50.0 x 17.7 mm3
Environmental Range
: Operation Temperature : -10~+50oC, Relative humidity : 0~95%
eInstruction
8224 E Evans Rd
Scottsdale, AZ 85029 USA
I/O PIN LISTING
Pin No.
Pin Name
Type Description
VCC
3.3V power supply
GND
Ground
RESET_
System reset input pin, active low
UART_TX
UART data output, with weak internal pull-up
UART_CTS
UART clear to send active low, with weak internal pull-down
UART_RX
UART data input, with weak internal pull-down
UART_RTS
UART request to send active low, with weak internal pull-up
eInstruction
8224 E Evans Rd
Scottsdale, AZ 85029 USA
Electrical Characteristics
Absolute Maximum Ratings :
Supply Voltage
Storage Temperature
Min.
Typ.
Max.
3.6
-40
85
Min.
Typ.
Max.
3.1
3.3
3.5
Unit
Recommend Operation Conditions :
Supply Voltage
Storage Temperature
Unit
70
Min.
Typ.
Max.
Unit
VIL Input Voltage Low
-0.4
+0.8
VIH Input Voltage High
2.3
3.7
0.2
3.1
Input/Output Terminal Characteristics :
Digital (UART, PIO)
VOL Output Voltage Low, (IO is 4mA)
VOH Output Voltage High, (IO is -4mA)
eInstruction
8224 E Evans Rd
Scottsdale, AZ 85029 USA
Radio Characteristics
Maximum RF transmit power
Sensitivity, 0.1% BER
Min
Typ
Max
Bluetooth Spec.
Unit
0~ +20
dBm
2.402 GHz
-82
-78
2.411 GHz
-82
-78
2.480 GHz
-82
-78
RF Power control range
dBm
≦-70
dBm
≧16
28
dBm
RF Power control resolution
3.6
Δf1avg Max. modulation
162
163
164
40 < Δf1avg < 175
KHz
Δf2max Min.. modulation
146
153
155
115
KHz
Δf1avg /Δf2avg
0.98
Initial Center Frequency
Frequency Drift (single slot packet)
-8
Frequency Drift (five slot packet)
-10
4.6
dBm
dB
≧0.80
10
±75
KHz
+16
≦±25
KHz
-8
+20
≦±40
KHz
FCC Statements:
1. This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
2. This device and its antenna(s) must not be co-located or operating in conjunction
with any other antenna or transmitter.
3. Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user authority to operate the equipment.
4. This device is for OEM installation only, the End User manual shall not contain
informationabout how to install the module.
5. This compliance to FCC radiation exposure limits for an uncontrolled environment,
and minimum of 20 cm separation between antenna and body.
6. Only the type of antenna tested may be used.
7. The end product must carry a label stating "Contains TX FCC ID:CTW-BTLR" &
" IC: 4524A-BTLR " .
Information for OEM integrator:
The OEM integrator has to be aware not to provide information to the end user regarding how to install or
remove this RF module in the users manual of the end product which integrate this module.
The users manual for OEM integrators end users must include the following information in a prominent
location
IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, the antenna used for
this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and
must not be co-located or operating in conjunction with any other antenna or transmitter.


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2008:07:11 11:05:52+08:00
Create Date                     : 2008:06:30 18:32:45+08:00
Metadata Date                   : 2008:07:11 11:05:52+08:00
Format                          : application/pdf
Title                           : Microsoft Word - BTLR  MENU new.doc
Creator                         : admin
Document ID                     : uuid:c14b1f57-f586-44e1-a8b9-dfe662c93c44
Instance ID                     : uuid:a94eaa99-e647-4f26-a7eb-f24cdb169460
Has XFA                         : No
Page Count                      : 7
Author                          : admin

EXIF Metadata provided by EXIF.tools