eMPIA Technology CAM-480DJ Wireless Network Camera User Manual DVB T DVB C Hybrid UB420 Dongle USB2

eMPIA Technology Corp. Wireless Network Camera DVB T DVB C Hybrid UB420 Dongle USB2

Users Manual

Download: eMPIA Technology CAM-480DJ Wireless Network Camera User Manual DVB T DVB C Hybrid UB420 Dongle USB2
Mirror Download [FCC.gov]eMPIA Technology CAM-480DJ Wireless Network Camera User Manual DVB T DVB C Hybrid UB420 Dongle USB2
Document ID2115671
Application IDcmcnCdFmAcZFujLg8unegw==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize28.98kB (362271 bits)
Date Submitted2013-11-11 00:00:00
Date Available2013-11-13 00:00:00
Creation Date2013-11-05 12:11:58
Producing SoftwareMicrosoft® Office Word 2007
Document Lastmod2013-11-11 18:25:42
Document TitleDVB-T/DVB-C Hybrid UB420 Dongle USB2
Document CreatorMicrosoft® Office Word 2007
Document Author: onahung

Camvie
WiFi Day/Night camera
Model No. : CAM-480DJ
Page 1 of 5
2013/11/5
1.Overviews:
The Camvie Wi-Fi Camera CAM-480DJ is design for all day video surveillance device with easily
setup flow by user ID/password. With day/night vision support, the device can easy check on your
baby in crib or watch your pets at play--all with your mobile device. The camera requires the wifi
router and internet connection in setup environment. Simply download the free app on your iOS or
Android mobile device, user can keep eyes open on your home anytime, anywhere. With two
sensors design, the camera can determine the environment light intelligently, switch between
day/night mode sensors for better low light performance in night condition.
CAM-480DJ has two-way audio support. You can monitor the synchronized video/audio and talk
to or warn the people around the camera from your iPhone/iPad and Android once you got the
push notification.
The speaker jack is supported so that you could connect any high power
speaker to the camera for your needs.
MJPEG video engine can be used to compress 640*480 up to 30fps. Motion detection and push
notification on mobile device is supported, user can set the video streaming and recording on
mobile which can perfectly keep the family safe.
2.Features
•
Setup from iphone, ipad, and any other android mobile device in minutes. No computer require.
• Two sensors support for Day and Night vision, intelligently algorithm for auto mode switch
without setting.
•
Built-in microphone and speaker jack with push talk support for warning and voice collection at
baby watch.
•
Music player function on app, provide music streaming from your mobile to device for baby
comfort.
•
Push notification on iPhone/iPad and Android for motion detection with specified detection
zone setting.
•
Publish function support for live video sharing.
Page 2 of 5
2013/11/5
3. Specification:
Hardware Specification
Antenna
2dBi PCB Antenna
Power Supply Input
DC 5V / 1A
Operating Temperature
0 ~ 40 ℃
Storage Temperature
- 10 ~ 70 ℃
Relative Humidity
10% ~ 90%, non-condensing
Storage Humidity
5% ~ 95% non-condensing
Power consumption
Dimensions
through put:420mA
standby :222mA
L:47 * W: 47 * H: 36 mm
Day: F2.4, viewing angle: 72°, focus range: 30 cm to
lens
infinity
Night: F2.4, without IR, viewing angle: 72°, focus
range: 30 cm to infinity
sensor
Wifi connectivity
Video codec
weight
audio
VGA 1/5 sensor
802.11b/g/n Wireless with WEP/WPA/
WPA2 security
MJPEG
JPEG for still images
TBD
Built-in microphone for audio monitoring
Speaker jack for external speaker
Page 3 of 5
2013/11/5
Page 4 of 5
2013/11/5
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO
THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
Federal Communications Commission Requirements
The equipment has been tested and found to comply with the limits for Class B Digital Device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instruction,
may cause harmful interference to radio communication. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
●Reorient of relocate the receiving antenna.
●Increase the separation between the equipment and receiver.
●Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
●Consult the dealer or an experienced radio/TV technician for help.
THE CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY
RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER'S AUTHORITY TO OPERATE
THE EQUIPMENT.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and receiver.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
FCC Exposure Statement
This equipment must be installed and operated in accordance with provided
instructions and the antenna(s) used for this transmitter must be installed to
provide a separation distance of at least 20 cm from all persons and must
not be co-located or operating in conjunction with any other antenna or
transmitter. End-users and installers must be provide with antenna
installation instructions and transmitter operating conditions for satisfying
RFexposure compliance.
Page 5 of 5
2013/11/5

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Create Date                     : 2013:11:05 12:11:58+08:00
Creator Tool                    : Microsoft® Office Word 2007
Modify Date                     : 2013:11:11 18:25:42+08:00
Metadata Date                   : 2013:11:11 18:25:42+08:00
Format                          : application/pdf
Creator                         : onahung
Title                           : DVB-T/DVB-C Hybrid UB420 Dongle USB2
Producer                        : Microsoft® Office Word 2007
Document ID                     : uuid:e271758c-8d38-4cc1-b922-cde83c9dca1c
Instance ID                     : uuid:9555a911-ecce-4ddd-b635-220fedb26f53
Has XFA                         : No
Page Count                      : 5
Language                        : zh-TW
Author                          : onahung
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2AA68CAM-480DJ

Navigation menu