eero B010001 eero Model B010001 Wi-Fi Router/Access point User Manual Pt 2
eero inc. eero Model B010001 Wi-Fi Router/Access point Pt 2
eero >
Contents
- 1. User Manual Pt 1
- 2. User Manual Pt 2
User Manual Pt 2
eero inc. – 500 Howard Street Suite 900 San Francisco, CA 94105 - (415) 738-7972
Product User Manual
eero
500 Howard Street; Suite 900
San Francisco, CA 94105
phone: 415-738-7972
This document covers the following models:
USA: B010001; FCC ID: 2AEM4-B010001
USA: D010001; FCC ID: 2AEM4-D010001
Canada: B010002; IC Number: 20613-1117160
Canada: D010002; IC Number: 20613-91661170
eero inc. – 500 Howard Street Suite 900 San Francisco, CA 94105 - (415) 738-7972
Version
Date
Description
1.0.1
3/1/2016
Initial release for Generation 1 product
1.1.1
5/8/2017
Revised for
Gen2 products
The eero product is controlled through an App that the user installs on their Android or iOS phone.
This draft manual shows the screens that the user will navigate through.
eero inc. – 500 Howard Street Suite 900 San Francisco, CA 94105 - (415) 738-7972
Welcome screen showing the user’s network and status:
Clicking on the menu icon in the upper left corner takes you to the next screen. See next page.
eero inc. – 500 Howard Street Suite 900 San Francisco, CA 94105 - (415) 738-7972
Main menu screen:
When the user selects the “Help” tab, they are taken to the Help screen. See next page.
eero inc. – 500 Howard Street Suite 900 San Francisco, CA 94105 - (415) 738-7972
Help Screen; contains the tab for Legal.
When the user selects the Legal tab they are taken to the following page: See next page.
eero inc. – 500 Howard Street Suite 900 San Francisco, CA 94105 - (415) 738-7972
Legal page with Regulatory tab.
Selecting the Regulatory data opens up the next page.
eero inc. – 500 Howard Street Suite 900 San Francisco, CA 94105 - (415) 738-7972
Regulatory page information:
1. FCC radio frequency interference warnings & instructions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
No Unauthorized Modifications: Do not make any changes or modifications to the eero device without the prior express written
approval of eero inc. Any changes or modifications made without express written approval could void the user’s authority to operate
the eero device.
Note: The eero device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. The
eero device generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If the eero device does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Contact support@eero.com or an experienced radio/TV technician for help.
2. FCC guidelines for human exposure
The eero device complies with FCC radiation exposure limits set forth for an uncontrolled environment. The eero device should be
installed and operated with minimum distance of 32 cm between the radiator and your body.
3. FCC information to user
The eero device does not contain any user serviceable components and is to be used with approved antennas only. Any product
changes or modifications will invalidate all applicable regulatory certifications and approvals.
The eero device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.