elero Antriebstechnik 28010X9X3 Radio Module User Manual Manual UART RF Stick 138204501 EN 0716

Download:
Mirror Download [FCC.gov]
Document ID	3363892
Application ID	5nyu6Jc/aaeq3kssori8BQ==
Document Description	Manual UART_RF-Stick_138204501_EN_0716
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	100.36kB (1254503 bits)
Date Submitted	2017-04-20 00:00:00
Date Available	2017-04-20 00:00:00
Creation Date	2016-08-12 12:45:24
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2016-08-12 12:45:24
Document Title	Manual UART_RF-Stick_138204501_EN_0716
Document Creator	Adobe InDesign CC 2015 (Windows)

UART-RF-Stick 915
28 010 0903 - Integration Manual
FCC / IC
FCC ID: YBU28010X9X3
IC: 8929A- 280101X9X3
USA (FCC)
Part 15 Statement gem. FCC 15.19/RSS Gen Issue 3
Sect. 7.1.3
This device (elero UART-RF-Stick 915) complies with
Part 15 of the FCC Rules and with Industry Canada
license-exempt RSS standard(s). Operation is subject
to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
General
Product description
The elero UART RF Stick 915
• is a radio receiver for the elero ProLine 2 radio system.
• serves as a receiver module for devices for home
automation such as drives for roller shutters,
Venetian blinds, curtains or lighting systems and
heater systems.
• is constructed as a PCB device with integrated radio
module and antenna.
• does not have its own housing.
• communicates with the target product via a UART
interface and via the integrated radio module with the
elero ProLine 2 radio system.
• offers the full functionality of an elero ProLine 2 radio
receiver such as automatic functions. The routing
function is also integrated.
Intended use
The elero UART RF Stick 915 can be used in the
intended home automation devices such as drives for
roller shutters, Venetian blinds or lighting systems and
heater systems.
The devices also have a suitable slot for the UART RF
Stick 915.
Exclusion of liability
elero GmbH accepts no liability for injury, damage
or financial losses arising from modifications to the
device, improper use or a failure to observe the operating instructions. Liability for material defects is excluded in such cases.
Technical data
Product designation
UART RF Stick 915
Operating voltage [V] DC
2.7 ... 3.0 ... 3.6
Transmission frequency
[MHz]
915 (band)
Transmitting power [dBm]
1 (decibel milliwatt)
Operating temperature range
[°C]
0 ... 50
Dimensions [mm]
42.5 x 19.5
Item No.
28 010.0903
Contains FCC ID
YBU28010X9X3
Contains IC
8929A-28010X9X3
Canada, Industry Canada (IC)
Le présent appareil (elero UART-RF-Stick 915) est
conforme aux CNR d‘Industrie Canada applicables aux
appareils radio exempts de licence. L‘exploitation est
autorisée aux deux conditions suivantes :
(1) l‘appareil ne doit pas produire de brouillage, et
(2) l‘utilisateur de l‘appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d‘en compromettre le fonctionnement.
Caution:
Changes or modifications not expressly approved by
the party responsible for compliance could void the
user’s authority to operate the equipment.
Information:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help
Connection and installation
See operating manual of the target product.
Manufacturer’s
address
Service
elero GmbH
72660 Beuren
GERMANY
www.elero.com
If faults should occur despite
proper operation or if the device
is damaged, contact your dealer
or the manufacturer.
138204501_EN_0716
Label requirements for the target device
The target product must be labeled with the following
three specifications:
• Contains FCC ID: YBU28010X9X3
• Contains IC: 8929A-28010X9X3
• This device complies with Part 15 of the FCC Rules
and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference,
and
(2) this device must accept any interference
received, including interference that may cause
undesired operation.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Language                        : de-DE
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c123 79.158978, 2016/02/13-01:11:19
Create Date                     : 2016:08:12 12:45:24+02:00
Metadata Date                   : 2016:08:12 12:45:24+02:00
Modify Date                     : 2016:08:12 12:45:24+02:00
Creator Tool                    : Adobe InDesign CC 2015 (Windows)
Instance ID                     : uuid:00331a74-5d9a-440a-88f6-6261036639a3
Original Document ID            : xmp.did:C47527A61E5AE6119A229091031D55EA
Document ID                     : xmp.id:7eba7c68-3120-974d-a6f5-e87c53c179c9
Rendition Class                 : proof:pdf
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2015 (Windows)
History Changed                 : /
History When                    : 2016:08:12 12:45:24+02:00
Derived From Instance ID        : xmp.iid:FEBEA127615DE611A2C5C6268EE4B01C
Derived From Document ID        : xmp.did:92005e57-147f-fe4e-aa92-bc43bc809dee
Derived From Original Document ID: xmp.did:C47527A61E5AE6119A229091031D55EA
Derived From Rendition Class    : default
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 2
Creator                         : Adobe InDesign CC 2015 (Windows)

EXIF Metadata provided by EXIF.tools