everynet GW1 everynet Network Gateway v2.0 User Manual Manualx

Download:
Mirror Download [FCC.gov]
Document ID	3144683
Application ID	Uy4U9OrmRY/ruDhla53O+Q==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	99.29kB (1241130 bits)
Date Submitted	2016-09-23 00:00:00
Date Available	2016-09-23 00:00:00
Creation Date	2016-08-11 14:00:04
Producing Software	Mac OS X 10.11.6 Quartz PDFContext
Document Lastmod	2016-09-10 10:43:04
Document Title	Microsoft Word - Manual.docx
Document Creator	Word

everynet Network Gateway V2.0
FEATURE SET
−
−
−
−
−
−
−
−
LoRaWAN™ network compliant
Compact size 145 х 93 х 64 mm
Simple to mount and install
Integrated GPS and 3G antennas
PoE IEEE 802.3af Class A, 48V
Integrated backup battery
Ruggedized housing
White Label options
DESCRIPTION
The everynet Network Gateway product is a very compact, fully featured LoRaWAN™
complinant network base station. It has been designed to offer low cost, simple to install and to
run LoRaWAN network infrastructure. With intergated GPS and 3G antennas, a PoE main supply
with an intergated back up battery; both resilience and dual backhaul capabilities have been
provsioned. The Gateway has a range of >15Km LoS and >2Km in dense urban enviroments.
The LoRaWAN™ Network Controller and all network management and monitoring is provided
by the eveynet Core Network Platform.
HARDWARE:
−
−
−
−
−
−
−
−
−
−
CPU: 454MHz, ARM926
RAM: DDR2, 128Mb
FLASH: NAND, 512Mb
Battery powered Real time clock
Temperature sensor
CPU Temperature sensor
Humidity sensor
Battery voltage sensor
Hardware watchdog
Advanced power management (ability to
cut power off any peripherals)
3G/ISM/GPS
−
−
Internal GPS and 3G antennas
Antenna lightning protection (V2.0)
COMMUNICATION:
−
−
−
−
−
−
−
−
−
Ethernet 10/100 Base T
HSDPA/UMTS 900/2100MHz, DL 21 Mbps, UL
5.76 Mbps
UART for debug terminal
LED indication
Secured VPN, no need of external IP-address
LoRaWAN™ compliant (EU868, US915)
LoRa™ Sensitivity -141dB, 49 LoRa channels
LoRa™ Antenna: gain - 10dBm, polarization vertical,
More than 15km range LoS and 2km in dense
urban environment
GENERAL INFORMATION:
−
−
−
Dimensions: 1450 х 930 х 640 mm
Weight; 750g
Operating rempera/ture: -40 oC/ +80 oC
everynet Gateway V2.0 | 1
POWER:
−
−
PoE IEEE 802.3af Class A, 48V
Max. power consumption: 15W
Internal 2000uAh Lo-Po battery (2-8
hours of operation)
ENVIROMENT:
−
−
Ingress protection IP67
UV and Impact resistance
MECHACINAL DIAGRAM:
everynet Gateway V2.0 | 2
ANTENNA SPECIFICATIONS:
everynet Gateway V2.0 | 3
INSTALLATION GUIDE:
everynet Gateway V2.0 | 4
FCC Caution: Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
This device and its antenna(s) must not be co-located or operating in conjunction with any
other antenna or transmitter.
This equipment should be installed and operated with minimum distance 20cm between the
radiator and your body.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the followingmeasures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
FCCID:2AJNF-GW1

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15
Create Date                     : 2016:08:11 14:00:04Z
Creator Tool                    : Word
Modify Date                     : 2016:09:10 10:43:04+08:00
Metadata Date                   : 2016:09:10 10:43:04+08:00
Producer                        : Mac OS X 10.11.6 Quartz PDFContext
Format                          : application/pdf
Title                           : Microsoft Word - Manual.docx
Document ID                     : uuid:02a64c93-13e4-46b5-ac43-ebee68fa90a1
Instance ID                     : uuid:e05d5169-c35f-49d4-9912-3c05445c83b7
Page Count                      : 5
PDF Version                     : 1.4
Creator                         : Word

EXIF Metadata provided by EXIF.tools