Filemaker Pro Network Install Setup Guide File Maker 11 Fmp11 En

User Manual: filemaker FileMaker Pro 11 - Network Install Setup Guide Free User Guide for FileMaker Software, Manual

Open the PDF directly: View PDF PDF.
Page Count: 14

DownloadFilemaker Pro Network Install Setup Guide File Maker 11 - Fmp11 En
Open PDF In BrowserView PDF
FileMaker Pro 11
®

Network Install Setup Guide

© 2007–2010 FileMaker, Inc. All Rights Reserved.
FileMaker, Inc.
5201 Patrick Henry Drive
Santa Clara, California 95054
FileMaker is a trademark of FileMaker, Inc. registered in the U.S. and other countries. The file folder logo is a trademark of FileMaker,
Inc. All other trademarks are the property of their respective owners.
FileMaker documentation is copyrighted. You are not authorized to make additional copies or distribute this documentation without
written permission from FileMaker. You may use this documentation solely with a valid licensed copy of FileMaker software.
All persons, companies, email addresses, and URLs listed in the examples are purely fictitious and any resemblance to existing persons,
companies, email addresses, or URLs is purely coincidental. Credits are listed in the Acknowledgements documents provided with this
software. Mention of third-party products and URLs is for informational purposes only and constitutes neither an endorsement nor a
recommendation. FileMaker, Inc. assumes no responsibility with regard to the performance of these products.
For more information, visit our website at www.filemaker.com.
Edition: 01
U09506-002A

Contents
Network Install Setup Guide
About this guide
Finding the license key
Installing FileMaker Pro in Windows
Choosing an installation method (Windows)
About installing Bonjour (Windows)
Installing FileMaker Pro using a networked volume (Windows)
Installing from the command line (Windows)
Setting up silent assisted installations (Windows)
Setting up an MSI transform (Windows)
Installing FileMaker Pro in the Mac OS
Choosing an installation method (Mac OS)
Installing FileMaker Pro using a networked volume (Mac OS)
Installing from the command line (Mac OS)
Installing remotely using Apple Remote Desktop (Mac OS)
About the personalization file
Setting personalization properties

5
5
5
5
6
7
7
8
9
10
10
10
11
11
11
12

4

FileMaker Pro Network Install Setup Guide

Network Install Setup Guide
About this guide
This document explains how to configure the installation of FileMaker® Pro or FileMaker Pro Advanced
over a network.
For information about the products or to install single copies, see the Installation and New Features Guide.
PDF documentation comes with the electronic download and the product DVD. You can also access
electronic documentation in the following ways:

1 In FileMaker Pro or FileMaker Pro Advanced, choose Help menu > Product Documentation, then choose
the document you want from the submenu.

1 On the web, go to www.filemaker.com/documentation.
Your electronic download or DVD contains FileMaker product installers for Windows and the Mac OS. All
use of this software is subject to the terms of your license agreement.

Finding the license key
You must enter the 35-digit alphanumeric license key to install the software. If you paid for your software
electronically, you received an email message with a link to a PDF file with your license key. If you have a
product DVD, the license key is on the back of the DVD sleeve.
Important If you purchased a Volume License or Site License, the license key is customized for your
organization. When installing software, enter the organization name exactly as it appears on your license
agreement (“Proof of License”). The organization name must be capitalized the same way it appears on
your agreement.

Installing FileMaker Pro in Windows
Before you install FileMaker Pro, make sure you have the license key ready. For more information, see
“Finding the license key” on page 5.
Note Users must have Administrator privileges to install FileMaker Pro or FileMaker Pro Advanced.

Choosing an installation method (Windows)
Before you configure your installation, decide how you want to install the software. The installation method
you choose determines how the license key and other personalized information will be entered when users
install FileMaker Pro.

6

FileMaker Pro Network Install Setup Guide

For some of the installation methods, you can edit a personalization file named Assisted Install.txt to provide
the personalized information before installing the product. For more information about the personalization
file, see “About the personalization file” on page 11.
Installation method

Personalized information

Each user installing the software using Users enter the personalized information when prompted in the installer. For more
the installer user interface
information, see the Installation and New Features Guide.
“Installing FileMaker Pro using a
networked volume (Windows)” on
page 7.

Edit the personalization file (Assisted Install.txt) to provide personalized information to
the installer and standardize all networked FileMaker Pro or FileMaker Pro Advanced
installations. This method lets you customize the installation, and eliminates the need to
distribute and administer license keys. FileMaker, Inc. recommends this method.

“Installing from the command line
(Windows)” on page 7.

Users provide the personalized information at the command line.

“Setting up silent assisted installations Edit the personalization file (Assisted Install.txt) before performing a silent installation. User
(Windows)” on page 8.
interaction with the FileMaker installer is kept to a minimum. The installer reads
personalization information from the personalization file and installation screens do not display.
“Setting up an MSI transform
(Windows)” on page 9.

Create an MSI transform (*.msi file) to provide the personalized information. The
changes persist in your installer image. You don’t have to edit the personalization file and
can remove it from the installer.

About installing Bonjour (Windows)
Bonjour service must be installed for databases to be broadcast and for remote databases to be detected. If
Bonjour is not installed or if the Bonjour service isn’t running, users won’t be able to view hosted databases
in the Open Remote File dialog box. They can manually enter IP addresses for IPv4 and IPv6 and for
database names.
Bonjour can be installed only by using Setup.exe in full user interface mode or silent mode (not FileMaker
Pro 11.msi or FileMaker Pro 11 Advanced.msi).
During the setup operation, one of the following will occur:

1 If Bonjour isn’t detected, the installer alerts you and prompts you to install Bonjour.
1 If a previous version of Bonjour is detected, the installer alerts you. It prompts you to manually uninstall
the older version of Bonjour and manually install the version of Bonjour supported by FileMaker.

1 If the same or a later version of Bonjour is detected, the installer does not alert you and does not install Bonjour.
You can also install Bonjour manually. Open the Bonjour folder (located at the same level as Setup.exe),
open the 32-bit or 64-bit folder, and then launch BonjourSetup.exe.

Installing FileMaker Pro in Windows

7

Installing FileMaker Pro using a networked volume (Windows)
To make FileMaker installation files available on your network:
1. Create an installer folder on a networked volume for the FileMaker installer files.
2. Locate the Files folder on the product DVD and copy the files to the folder you created on your networked volume.
Note If you share the electronic download or DVD over the network rather than copying installation files
to a networked volume, only one installer will be available—the installer for the platform of the machine
running the DVD. If you share the DVD over the network, you can’t use a personalization file. See
“About the personalization file” on page 11.
3. To set up an assisted installation, use a text editor such as Notepad to open the personalization file
(Assisted Install.txt), which is located in the Files folder.
4. Edit the personalization file. See “About the personalization file” on page 11.
5. Save the changes you have made to Assisted Install.txt as plain text.
To install FileMaker Pro or FileMaker Pro Advanced, instruct users to:
1. Mount the volume containing the installation files.
2. Double-click Setup.exe.
3. Windows XP, Windows Vista, and Windows 7 users will see the Open File – Security Warning dialog
box. Click Run to continue installing.

Installing from the command line (Windows)
You can install FileMaker products from the command line without editing the Assisted Install.txt file. A
command line install requires you to run the Command Prompt as administrator.
1. In Windows, choose Start menu > All Programs > Accessories.
2. Right-click Command Prompt, then choose Run As (Windows XP) or Run as administrator
(Windows Vista or Windows 7).
3. Windows XP: In the Run As dialog box, select Administrator, enter the password, then click OK.
Windows Vista or Windows 7: In the Administrator: Command Prompt window, enter a command.
For example:
msiexec -i "FileMaker Pro.msi" AI_USERNAME="John Lee"
AI_ORGANIZATION="FileMaker, Inc." AI_LICENSEKEY=12345-12345-12345-1234512345-12345-12345

The property names must be capitalized. For more information, see “Setting personalization properties”
on page 12.

8

FileMaker Pro Network Install Setup Guide

Setting up silent assisted installations (Windows)
During a silent installation, user interaction with the FileMaker installer is kept to a minimum. Required
installation information is read from the personalization file (Assisted Install.txt) and installation screens are
not displayed. For information about setting up Assisted Install.txt, see “About the personalization file” on
page 11.
There are two ways to perform a silent installation. Users can:

1 Double-click the Setup.exe file located on the mounted volume. This method requires that you modify
the Setup.ini file. For more information, see the next section.

1 Type the installation command and applicable options at the command line. For more information, see
“Performing a silent installation using the command line” on page 8.
Modifying Setup.ini for silent installation
1. Locate the Setup.ini file in the Files folder inside the FileMaker Pro or FileMaker Pro Advanced folder.
2. Open Setup.ini using a text editor such as Notepad.
3. Locate the [Startup] section and type one of the following after CmdLine=
To

Add the options as shown after CmdLine=

Install a FileMaker product without a user interface (silent install)

CmdLine=/q

Display a progress bar and Cancel button during installation

CmdLine=/qb+

Install FileMaker Pro or FileMaker Pro Advanced to a non-default
location on the local machine

CmdLine=/qb+ INSTALLDIR=installpath

Note Installpath is the desired location of the FileMaker product folder on the user’s computer. The path
cannot contain spaces unless it is enclosed by quotation marks. The following example path would install
into the FileMakerPro11 folder inside the Applications folder on drive C:
C:\Applications\FileMakerPro11

4. Save and close the Setup.ini file.
5. Instruct users to double-click the Setup.exe file located on the mounted volume.
Performing a silent installation using the command line
Users can install FileMaker products from the command line. When you use this method, the installer can
inform users whether installation was successful.
A command line silent install requires you to run the Command Prompt as administrator.
1. In Windows, choose Start menu > All Programs > Accessories.
2. Right-click Command Prompt, then choose Run As (Windows XP) or Run as administrator
(Windows Vista or Windows 7).
3. Windows XP: In the Run As dialog box, select Administrator, enter the password, then click OK.
Windows Vista or Windows 7: In the Administrator: Command Prompt window, enter a command.

Installing FileMaker Pro in Windows

9

The following table describes options users have when performing an assisted installation from the
command line.
To

Instruct users to open a command window, then type

Install a FileMaker product without a user interface (silent install) "pathname\setup.exe" /s /v/qn
Uninstall a FileMaker product without a user interface (silent "pathname\setup.exe" /s /x /v/qn
uninstall)
Install a FileMaker product when required — advertise to
current user (silent advertised install)

"pathname\setup.exe" /s /v /ju

Install a FileMaker product when required — advertise to all "pathname\setup.exe" /s /v /jm
users (silent advertised install)
Display a dialog box indicating whether the FileMaker
product was successfully installed

"pathname\setup.exe" /s /v/qn+

Display a progress bar and cancel button during installation

"pathname\setup.exe" /s /v/qb+

Install FileMaker Pro to a non-default location on your local
machine

"pathname\setup.exe" /s /v"/qb+
INSTALLDIR=\"installpath\FileMaker Pro 11\""

Install FileMaker Pro Advanced to a non-default location on
your local machine

"pathname\setup.exe" /s /v"/qb+
INSTALLDIR=\"installpath\FileMaker Pro 11 Advanced\""

Notes

1 Pathname is the location of the installer directory you created on the networked volume.
1 Installpath is the desired location of the FileMaker product folder on the user’s computer. The path
cannot contain spaces unless it is enclosed by quotation marks.

1 The installer may reboot the computer if required.

Setting up an MSI transform (Windows)
You can create an MSI transform (*.mst file) to provide personalization information to the installer. For
information about Orca, MsiTran.exe, and other Windows installer development tools, see
www.microsoft.com.
1. Create a copy of the FileMaker Pro.msi file. For example, name the copy FileMaker Pro Assisted Install.msi.
2. Use Orca (or similar software) to edit FileMaker Pro Assisted Install.msi. Set the personalization
properties (AI_*) in the Property table.
See “Setting personalization properties” on page 12.
3. Use an MSI transform generating tool, like MsiTran.exe, to create a transform. For example, to create a
transform named Example.mst, type:
msitran.exe -g "FileMaker Pro.msi" "FileMaker Pro Assisted Install.txt"
Example.mst

4. Apply the transform to the installer. For example:
msitran.exe -a Example.mst "FileMaker Pro.msi"

5. Instruct users to run the installer using the command line, or by double-clicking the Setup.exe file located
on the mounted volume.

10

FileMaker Pro Network Install Setup Guide

Installing FileMaker Pro in the Mac OS
Before you install FileMaker Pro, make sure you have the license key ready. For more information, see
“Finding the license key” on page 5.
Note Users must have Administrator privileges to install FileMaker Pro or FileMaker Pro Advanced.

Choosing an installation method (Mac OS)
Before you configure your installation, decide how you want to install the software. The installation method
you choose determines how the license key and other personalized information will be entered when users
install FileMaker Pro.
For some of the installation methods, you can edit a personalization file named Assisted Install.txt to provide
the personalized information before installing the product. For more information about the personalization
file, see “About the personalization file” on page 11.
Installation method

Personalized information

Each user installing the software using the
installer user interface

Users enter the personalized information when prompted in the installer. For
more information, see the Installation and New Features Guide.

“Installing FileMaker Pro using a networked
volume (Mac OS)” on page 10.

Edit the personalization file (Assisted Install.txt) to provide personalized
information to the installer and standardize all networked FileMaker Pro or
FileMaker Pro Advanced installations. This method lets you customize the
installation, and eliminates the need to distribute and administer license keys.
FileMaker, Inc. recommends this method.

“Installing from the command line (Mac OS)” on Edit the personalization file (Assisted Install.txt) to provide personalized
page 11.
information before users install the software using the command line.
“Installing remotely using Apple Remote
Desktop (Mac OS)” on page 11.

Edit the personalization file (Assisted Install.txt) to provide personalized
information before installing the software using Apple Remote Desktop.

Installing FileMaker Pro using a networked volume (Mac OS)
To make FileMaker installation files available on your network, first create a disk image (.dmg file) for the
installation files, then copy the disk image to your networked volume:
1. Create an installer folder on your computer for the FileMaker installer files.
2. Locate the following files on the product DVD and copy them to the installer folder:

1 The FileMaker Pro 11.mpkg or FileMaker Pro 11 Advanced.mpkg installer application, which is
located at the root level of the DVD and contains the personalization file (Assisted Install.txt).

1 The Registration tool (Registration.app)
3. To set up an assisted installation, right-click the installer application (*.mpkg file) in the installer folder
and choose Show Package Contents.
4. Use a text editor such as TextEdit to open the Assisted Install.txt.
5. Edit the personalization file. See “About the personalization file” on page 11.
6. Save the changes you have made to Assisted Install.txt as plain text.
7. Create a disk image for the installer folder that contains the installer application and the registration tool.
For more information about creating disk images, see Mac Help.

About the personalization file

11

8. Copy the new installer disk image (.dmg file) to your networked volume.
Note On Mac OS, the installer installs the FileMaker product to use the same language as the current Mac OS
system language. Users who want to install the FileMaker product with a different language should use the
International System Preference to change the Mac OS language prior to installing the FileMaker product.
To install FileMaker Pro or FileMaker Pro Advanced, instruct users to:
1. Mount the volume containing the installation files.
2. Double-click the disk image (*.dmg file) on the networked volume.
3. Double-click the FileMaker Pro 11.mpkg or FileMaker Pro 11 Advanced.mpkg installer application.

Installing from the command line (Mac OS)
After you edit the Assisted Install.txt file, users can install FileMaker products from the command line.
1. Open a Finder window, then choose Go menu > Utilities.
2. Double-click Terminal from the list of utilities.
3. In the Terminal window, type a command and then press Return.
For example:
sudo -u “” /usr/sbin/installer -verbose -pkg “/FileMaker Pro 11 Advanced.mpkg” -target “/Applications”

When prompted to provide a password, the user needs to provide a password for an account with
Administrator privileges.

Installing remotely using Apple Remote Desktop (Mac OS)
You can install FileMaker Pro remotely using Apple Remote Desktop. For more information about remote
installations, see the Apple Remote Desktop Help.
To provide the license key and other personalized information to the installer, edit the personalization file
(Assisted Install.txt) before installing the software. For more information, see “About the personalization
file” on page 11.

About the personalization file
An assisted installation eases installation of FileMaker Pro or FileMaker Pro Advanced in a multiple
computer environment. You enter information (such as a generic user name, organization name, license key,
and installation options) in a personalization file, and then make the file available on your network.
The personalization file, Assisted Install.txt, is used by the FileMaker installers to install FileMaker Pro or
FileMaker Pro Advanced on computers in your organization. The file is identical on Windows and Mac OS.
Note Windows: Before FileMaker Pro 7, the personalization file was named FileMaker Pro x.pdf. This file
still exists and is required for an assisted installation, but you should not edit this file. The file is used by
Microsoft SMS.

12

FileMaker Pro Network Install Setup Guide

Setting personalization properties
This section explains the properties and variables in the personalization file, Assisted Install.txt.
Note Property names (AI_*) must be capitalized. Variable settings are not case-sensitive, except for
organization names. (See the description for AI_ORGANIZATION.)
To

Do this

Enter a user name for all installations

Type a name after AI_USERNAME=
If you leave this variable blank, the installer defaults to the name that was used to
register Windows (Windows) or the account user name (Mac OS).

Enter a company name for all installations

Type a name after AI_ORGANIZATION=
If you purchased a Volume License or Site License, type the organization name
exactly as it appears on your license agreement (“Proof of License”). The
organization name must be capitalized the same way it appears on your agreement.
Windows: If you leave this variable blank, the installer defaults to the name that
was used to register Windows.

Enter a valid license key for all installations

Type your license key after AI_LICENSEKEY=
For information about the license key, see “Finding the license key” on page 5.

Windows: Specify the language version of the
FileMaker product. This setting only works
when users perform a silent assisted
installation. See “Setting up silent assisted
installations (Windows)” on page 8.

Type the name of the language after AI_LANGUAGE=
Valid entries are: Dutch, English, French, German, Italian, Japanese,
SimplifiedChinese, Spanish, Swedish, or TraditionalChinese.
Mac OS: Do not specify a language setting. The FileMaker installer uses the
current language setting from your operating system.

Windows: Specify whether the FileMaker
product is available to all users or to the
current user only

Type one of the following after AI_APPLICATIONUSERS=
1 AllUsers to make the FileMaker product available to any user logged in on this
computer

1 OnlyCurrentUser to restrict use of the FileMaker product to the user account that
is logged on during installation
Prevent or allow users to create new databases

Type one of the following after AI_NONEWDATABASES=
1 1 (one) to prevent users from creating databases

1 0 (zero) to allow users to create databases
For more information, see “Preventing users from creating databases” on page 13.
Windows: Create a shortcut for the FileMaker Type one of the following after AI_SHORTCUTS=
product on the desktop and in the Quick
1 1 (one) to create a shortcut
Launch toolbar
1 0 (zero) if you don’t want to create a shortcut
See the note at the end of this table for more information.
Suppress or display electronic registration

Type one of the following after AI_REGISTRATION=
1 0 (zero) to suppress electronic registration. Your FileMaker product won’t
prompt users to enter registration information.

1 1 (one) to display an electronic registration reminder
Suppress or display the personalization dialog Type one of the following after AI_SKIPDIALOG=
box during installation
1 1 (one) to suppress the personalization dialog box. Users don’t have to enter a
name or organization, and they don’t see the license key. (If the key you entered
is invalid, the personalization dialog box displays.)

1 0 (zero) to display the personalization dialog box during installation
See the note after this table for more information.

About the personalization file

13

To

Do this

Disable or enable the Update Notification
dialog box during installation

Type one of the following after AI_DISABLEUPDATENOTIFY=
1 1 (one) to disable the Update Notification dialog box. Users will not be notified
when a software update is available. In addition, the following items will not be
available in the FileMaker product: Help menu > Check for Updates and the
General Preferences option.

1 0 (zero) to enable the Update Notification dialog box. Users will be notified at
startup when a software update is available. This is the default setting.
For more information on update notification, see the Installation and New
Features Guide.
Disable or enable the New Version
Notification dialog box during installation

Type one of the following after AI_DISABLEVERSIONNOTIFY=
1 1 (one) to disable the New Version Notification dialog box. Users will not be
notified when a new version of the software is available.

1 0 (zero) to enable the New Version Notification dialog box. Users will be notified at
startup when a new version of the software is available. This is the default setting.

Note The AI_SHORTCUTS and AI_SKIPDIALOG properties determine whether the installer prompts the
user to create a shortcut (Windows).
AI_SHORTCUTS=

AI_SKIPDIALOG=

Result

1

1

No prompt. Creates shortcut

0

1

No prompt. Doesn’t create shortcut

1

0

A dialog box is displayed. The options for creating shortcuts will be selected in
the dialog box.

0

0

A dialog box is displayed. The options for creating shortcuts will not be
selected in the dialog box.

Preventing users from creating databases
You can set a property, AI_NONEWDATABASES, that prevents users from creating FileMaker databases.
If the option is set, the FileMaker product displays an alert message when users do the following:

1 Choose File menu > New Database.
1 Create a database from the FileMaker Quick Start Screen.
1
1
1
1
1

Export to a FileMaker Pro file.

1
1
1
1

Execute an Apple event to open a file in another format.

Choose File menu > Save a Copy As.
Open the New Database dialog box.
Recover a FileMaker Pro file.
Convert another file format (like tab-delimited) into a new FileMaker Pro file, for example, by choosing
File menu > Open.
Execute the Apple events do menu command to create a file.
Perform a script that does any of the above.
Choose a custom menu item that does any of the above.

To create databases, users must reinstall the FileMaker software with the AI_NONEWDATABASES
variable set to 0.

14

FileMaker Pro Network Install Setup Guide



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Tagged PDF                      : Yes
Page Mode                       : UseOutlines
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Create Date                     : 2009:11:13 16:59:56Z
Creator Tool                    : FrameMaker 7.2
Modify Date                     : 2009:11:13 16:59:56Z
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Format                          : application/pdf
Title                           : FileMaker Pro Network Install Setup Guide
Document ID                     : uuid:eb94e08d-f589-486c-84d6-88b219b8bb7d
Instance ID                     : uuid:daa1e1cf-ba02-433e-b73e-0338f2112045
Page Count                      : 14
Creator                         : FrameMaker 7.2
EXIF Metadata provided by EXIF.tools

Navigation menu