Garmin Montana 680T Owner’s Manual 610T OM EN

Montana 680 - Owner’s Manual Montana_610-680_OM_EN User Guide for Garmin GPS, Free Instruction Manual - 3

User Manual: garmin Montana 680T - Owner’s Manual Free User Guide for Garmin GPS, Manual - page3

Open the PDF directly: View PDF .
Page Count: 24

Montana® 610/680

Owner’s Manual

September 2015 Printed in Taiwan 190-01940-00_0A

All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the

right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such

changes or improvements. Go to www.garmin.com for current updates and supplemental information concerning the use of this product.

Garmin®, the Garmin logo, Auto Lap®, BlueChart®, City Navigator®, Montana®, and TracBack® are trademarks of Garmin Ltd. or its subsidiaries, registered in the

USA and other countries. ANT+®, BaseCamp™

, chirp™

, Garmin Connect™

, HomePort™

, and tempe™

are trademarks of Garmin Ltd. or its subsidiaries. These

trademarks may not be used without the express permission of Garmin.

Mac® is a registered trademark of Apple Inc., registered in the U.S. and other countries. Windows® is a registered trademark of Microsoft Corporation in the

United States and other countries. microSD™

and the microSDHC logo are trademarks of SD-3C, LLC. Other trademarks and trade names are those of their

respective owners.

This product is ANT+® certified. Visit www.thisisant.com/directory for a list of compatible products and apps.

Table of Contents

Introduction.....................................................................1

Device Overview......................................................................... 1

Battery Information..................................................................... 1

Getting Started............................................................... 1

Installing the Battery Pack.......................................................... 1

Charging the Battery Pack.......................................................... 1

Installing AA Batteries.................................................................1

Turning On the Device................................................................ 2

Main Menu............................................................................. 2

Using the Touchscreen.......................................................... 2

Locking the Touchscreen....................................................... 2

Unlocking the Touchscreen................................................... 2

Registering Your Device............................................................. 2

Adjusting the Backlight Brightness............................................. 2

Acquiring Satellites Signals and Recording a Track................... 2

Waypoints....................................................................... 2

Creating a Waypoint................................................................... 2

Marking a Waypoint Using the Map............................................ 2

Finding a Waypoint..................................................................... 2

Editing a Waypoint...................................................................... 3

Deleting a Waypoint....................................................................3

Increasing the Accuracy of a Waypoint Location........................ 3

Projecting a Waypoint................................................................. 3

Tracks.............................................................................. 3

Recording a Track Log............................................................... 3

Changing the Current Track Color.............................................. 3

Saving the Current Track............................................................ 3

Selecting an Output Format for Saved Tracks........................... 3

Navigating Using TracBack®...................................................... 3

Clearing the Current Track......................................................... 3

Viewing Track Information.......................................................... 3

Saving a Location on a Track..................................................... 3

Showing Saved Tracks on the Map............................................ 3

Archived Tracks.......................................................................... 4

Archiving Tracks Automatically.............................................. 4

Archiving Tracks Manually..................................................... 4

Deleting a Track..........................................................................4

Navigation....................................................................... 4

Where To? Menu........................................................................ 4

Navigating to a Destination......................................................... 4

Finding a Location by Name....................................................... 4

Finding a Location Near Another Location................................. 4

Finding an Address..................................................................... 4

Marking and Starting Navigation to a Man Overboard

Location...................................................................................... 4

Stopping Navigation....................................................................4

Navigating with Sight 'N Go........................................................ 4

Navigating with the Map............................................................. 4

Navigating a Driving Route.................................................... 4

Optional Maps........................................................................ 5

BirdsEye Imagery...................................................................5

3D Map View..........................................................................5

Navigating with the Compass..................................................... 5

Calibrating the Compass........................................................5

Course Pointer....................................................................... 5

Elevation Plot.............................................................................. 5

Navigating to a Point on the Plot........................................... 5

Changing the Plot Type......................................................... 5

Resetting the Elevation Plot................................................... 5

Calibrating the Barometric Altimeter...................................... 5

Trip Computer............................................................................. 5

Resetting the Trip Computer.................................................. 6

Routes........................................................................................ 6

Creating a Route.................................................................... 6

Editing the Name of a Route.................................................. 6

Editing a Route...................................................................... 6

Viewing a Route on the Map.................................................. 6

Deleting a Route.................................................................... 6

Viewing the Active Route....................................................... 6

Reversing a Route................................................................. 6

Garmin Adventures..................................................................... 6

Creating an Adventure........................................................... 6

Starting an Adventure............................................................ 6

Camera and Photos........................................................ 6

Taking a Photo............................................................................6

Adjusting the Camera Lighting Mode......................................... 6

Viewing Photos........................................................................... 7

Viewing a Slideshow.............................................................. 7

Sorting Photos....................................................................... 7

Viewing the Location of a Photo............................................ 7

Navigating to a Photo.............................................................7

Setting a Photo as Wallpaper................................................ 7

Deleting a Photo.................................................................... 7

Geocaches...................................................................... 7

Downloading Geocaches............................................................ 7

Filtering the Geocache List......................................................... 7

Creating and Saving a Geocache Filter................................. 7

Editing a Custom Geocache Filter......................................... 7

Navigating to a Geocache.......................................................... 7

Logging the Attempt....................................................................7

chirp™........................................................................................ 7

Enabling chirp Searching....................................................... 7

Finding a Geocache with a chirp............................................7

Applications.................................................................... 8

Sending and Receiving Data Wirelessly..................................... 8

Setting a Proximity Alarm........................................................... 8

Calculating the Size of an Area.................................................. 8

Using the Calculator................................................................... 8

Viewing the Calendar and Almanacs.......................................... 8

Setting an Alarm......................................................................... 8

Starting the Countdown Timer.................................................... 8

Opening the Stopwatch.............................................................. 8

Satellite Page..............................................................................8

Changing the Satellite View................................................... 8

Turning Off GPS.................................................................... 8

Simulating a Location.............................................................8

ANT+ Sensors................................................................. 8

Pairing Your ANT+ Sensors....................................................... 8

Tips for Pairing ANT+ Accessories with Your Garmin

Device.................................................................................... 8

tempe.......................................................................................... 9

Displaying tempe Data................................................................9

Displaying Heart Rate Data........................................................ 9

Customizing the Device................................................. 9

Activity Profiles........................................................................... 9

Selecting a Profile.................................................................. 9

Creating a Custom Profile...................................................... 9

Editing a Profile Name........................................................... 9

Deleting a Profile....................................................................9

Customizing the Main Menu....................................................... 9

Creating a Shortcut..................................................................... 9

Adding a Shortcut to the Main Menu.......................................... 9

Custom Data Fields and Dashboards......................................... 9

Enabling the Map Data Fields................................................ 9

Customizing the Data Fields.................................................. 9

Customizing Dashboards....................................................... 9

Changing the Units of Measure................................................ 10

Table of Contents i

Locking the Screen Orientation................................................ 10

Adjusting the Backlight Timeout............................................... 10

Turning On Battery Save Mode................................................ 10

Adjusting the Volume................................................................ 10

System Settings........................................................................ 10

GPS and GLONASS............................................................ 10

Serial Interface Settings....................................................... 10

Customizing the Power Key......................................................10

Display Settings........................................................................ 10

Appearance Settings................................................................ 10

Map Settings............................................................................. 10

Advanced Map Settings....................................................... 11

Camera Settings....................................................................... 11

Tracks Settings......................................................................... 11

Time Settings............................................................................ 11

Position Format Settings...........................................................11

Heading Settings...................................................................... 11

Altimeter Settings......................................................................11

Geocaching Settings.................................................................11

Routing Settings....................................................................... 11

Fitness Settings........................................................................ 12

Setting Your Fitness User Profile......................................... 12

About Lifetime Athletes................................................... 12

About Heart Rate Zones...................................................... 12

Fitness Goals.................................................................. 12

Setting Your Heart Rate Zones....................................... 12

Running or Cycling with Your Device...................................12

Marine Settings......................................................................... 12

Setting Up Marine Alarms.................................................... 12

Setting the Device Tones..........................................................13

Resetting Data.......................................................................... 13

Restoring Default Values for Specific Settings.................... 13

Restoring Default Values for Specific Page Settings........... 13

Restoring All Default Settings.............................................. 13

Device Maintenance..................................................... 13

Support and Updates................................................................ 13

Updating the Software.............................................................. 13

Device Care.............................................................................. 13

Cleaning the Device............................................................. 13

Cleaning the Touchscreen................................................... 13

Water Immersion..................................................................13

Data Management.................................................................... 13

File Types............................................................................ 13

Installing a Memory Card..................................................... 13

Connecting the Device to Your Computer........................... 13

Transferring Files to Your Device........................................ 14

Sending Files to BaseCamp................................................ 14

Deleting Files....................................................................... 14

Disconnecting the USB Cable..............................................14

Resetting the Device.................................................................14

Removing the Battery Pack...................................................... 14

Device Information....................................................... 14

Specifications............................................................................14

About the Batteries................................................................... 14

Viewing Device Information...................................................... 14

Getting More Information.......................................................... 14

Troubleshooting........................................................... 15

How do I know my device is in USB mass storage mode?...... 15

I need to reset all settings back to factory default values......... 15

I need replacement parts or accessories.................................. 15

I need to buy an external GPS antenna................................... 15

My battery does not stay charged for very long........................ 15

My device does not appear as either a portable device or a

removable drive or volume on my computer.............................15

My device is not acquiring satellite signals............................... 15

My device does not charge....................................................... 15

My device does not go into mass storage mode

automatically............................................................................. 15

My screen does not respond.................................................... 15

Appendix....................................................................... 15

Optional Accessories................................................................ 15

Data Fields................................................................................15

Index.............................................................................. 18

ii Table of Contents

Introduction

WARNING

See the Important Safety and Product Information guide in the

product box for product warnings and other important

information.

Device Overview

ÀCamera lens (680 and 680t only)

ÁPower key

ÂmicroSD card slot (under battery door)

ÃPower connector for optional accessory mounts

ÄStereo headphone jack (under weather cap)

ÅBattery cover D-ring

ÆMini-USB port (under weather cap)

ÇMCX port for external GPS antenna (under weather cap)

Battery Information

WARNING

This product contains a lithium-ion battery. To prevent the

possibility of personal injury or product damage caused by

battery exposure to extreme heat, store the device out of direct

sunlight.

The temperature rating for the device may exceed the usable

range of some batteries. Alkaline batteries can rupture at high

temperatures.

NOTICE

Alkaline batteries lose a significant amount of their capacity as

the temperature decreases. Therefore, use lithium batteries

when operating the device in below freezing conditions.

The device operates on the included lithium-ion battery pack or

three AA batteries.

Getting Started

When using your device the first time, you should complete

these tasks to set up the device and get to know the basic

features.

1Install the batteries (Installing the Battery Pack, page 1).

2Charge the batteries (Charging the Battery Pack, page 1).

3Turn on the device (Turning On the Device, page 2).

4Register the device garmin.com/express.

5Adjust the backlight brightness (Adjusting the Backlight

Brightness, page 2).

6Acquire satellites (Acquiring Satellites Signals and Recording

a Track, page 2).

7Customize your device (Customizing the Device, page 9).

8Mark a waypoint (Creating a Waypoint, page 2).

9Navigate to a destination (Navigating to a Destination,

page 4).

Installing the Battery Pack

1Turn the D-ring counter-clockwise, and pull up to remove the

cover.

2Locate the metal contacts on the end of the lithium-ion

battery.

3Insert the battery into the compartment, contacts first.

4Press the battery into place.

5Replace the battery cover, and turn the D-ring clockwise.

Charging the Battery Pack

NOTICE

To prevent corrosion, thoroughly dry the mini-USB port, the

weather cap, and the surrounding area before charging or

connecting to a computer.

Do not attempt to use the device to charge a battery that was

not provided by Garmin®. Attempting to charge a battery that

was not provided by Garmin can damage the device and void

the warranty.

Before you can connect the straight connector of the USB cable

to your device, you may need to remove optional mount

accessories.

NOTE: The battery does not charge when outside the

temperature range of 32° to 113°F (0° to 45°C).

You can charge the battery using a standard wall outlet or a

USB port on your computer.

1Pull up the weather cap À from the mini-USB port Á.

2Plug the small end of the USB cable into the mini-USB port.

3Plug the USB end of the cable into the AC adapter or a

computer USB port.

4Plug the AC adapter into a standard wall outlet.

When you connect the device to a power source, the device

turns on.

5Charge the battery completely.

Installing AA Batteries

Instead of the battery pack (Installing the Battery Pack, page 1),

you can use alkaline, NiMH, or lithium AA batteries. This is

useful when you are on the trail and cannot charge the battery

pack. Use NiMH or lithium batteries for best results.

Introduction 1

NOTE: Standard alkaline batteries are not recommended when

using the camera feature.

1Turn the D-ring counter-clockwise, and pull up to remove the

cover.

2Insert three AA batteries, observing polarity.

3Replace the battery cover, and turn the D-ring clockwise.

Turning On the Device

Hold .

Main Menu

ÀStatus bar

ÁCurrent time and date

ÂApplication icons

ÃApplication drawer

Using the Touchscreen

• Tap the screen to select an item.

• Make each touchscreen selection a separate action.

• Select to open the application drawer for applications and

setup tools.

• From the application drawer, select or to scroll through

applications.

• Select to return to the previous page.

• Hold to return to the main menu.

• Select to view specific menu items for the page you are

viewing.

• Select to save your changes and close the page.

Locking the Touchscreen

You can lock the screen to prevent inadvertent screen touches.

Select > .

Unlocking the Touchscreen

Select > .

Registering Your Device

Help us better support you by completing our online registration

today.

• Go to garmin.com/express.

• Keep the original sales receipt, or a photocopy, in a safe

place.

Adjusting the Backlight Brightness

Extensive use of screen backlighting can significantly reduce

battery life. You can adjust the backlight brightness to maximize

the battery life.

NOTE: The backlight brightness may be limited when the

battery is low.

1Select .

2Use the slider to adjust the backlight level.

The device may feel warm when the backlight setting is high.

Acquiring Satellites Signals and Recording a

Track

Before you can use the GPS navigation features, such as

recording a track, you must acquire satellite signals. The device

may need a clear view of the sky to acquire satellite signals.

For more information about GPS, go to www.garmin.com

/aboutGPS.

1Hold .

2Wait while the device locates satellites.

When turns green, your device has acquired satellite

signals. The time and date are set automatically based on the

GPS position.

3Walk around to record a track (Tracks, page 3).

4Select an option:

• Select Map to view your track on the map.

• Select Compass to view the compass and customizable

data fields.

• Select Trip Computer to view your current speed,

distance, and other helpful statistics.

Waypoints

Waypoints are locations you record and store in the device.

Waypoints can mark where you are, where you are going, or

where you have been. You can add details about the location,

such as name, elevation, and depth.

Creating a Waypoint

You can save your current location as a waypoint.

1Select Mark Waypoint.

2If necessary, select Edit to change the name or other

waypoint data.

3Select Save.

Marking a Waypoint Using the Map

1Select Map.

2Select a location on the map.

3Select the information bar at the top of the screen.

4Select > OK.

Finding a Waypoint

1Select Waypoint Manager.

2Select a waypoint from the list.

3If necessary, select to narrow the search.

4Select an option:

• Select Spell Search to search using the name of the

waypoint.

2 Waypoints

• Select Select Symbol to search using the symbol of the

waypoint.

• Select Search Near to search near a recently found

location, another waypoint, your current location, or a

point on the map.

• Select Sort to view the list of waypoints based on nearest

distance or alphabetical order.

Editing a Waypoint

Before you can edit a waypoint, you must create a waypoint.

1Select Waypoint Manager.

2Select a waypoint.

3Select an item to edit, such as the name.

4Enter the new information, and select .

Deleting a Waypoint

1Select > Waypoint Manager.

2Select a waypoint.

3Select > Delete > Yes.

Increasing the Accuracy of a Waypoint

Location

You can refine a waypoint location for more accuracy. When

averaging, the device takes several readings at the same

location and uses the average value to provide more accuracy.

1Select Waypoint Manager.

2Select a waypoint.

3Select > Average Location.

4Move to the waypoint location.

5Select Start.

6Follow the on-screen instructions.

7When the confidence status bar reaches 100%, select Save.

For best results, collect 4 to 8 samples for the waypoint, waiting

at least 90 minutes between samples.

Projecting a Waypoint

You can create a new location by projecting the distance and

bearing from a marked location to a new location.

1Select Waypoint Manager.

2Select a waypoint.

3Select > Project Waypoint.

4Enter the bearing, and select .

5Select a unit of measure.

6Enter the distance, and select .

7Select Save.

Tracks

A track is a recording of your path. The track log contains

information about points along the recorded path, including time,

location, and elevation for each point.

Recording a Track Log

By default, the device records a track log automatically while it is

on and receiving a GPS signal. You can pause and start track

recording manually.

1Walk around to record a track.

2Select Current Track > .

3Select an option:

• To pause track recording, select .

• To start track recording, select .

Changing the Current Track Color

1Select Current Track > > Color.

2Select a color.

Saving the Current Track

1Select Current Track > .

2Select an option:

• Select to save the entire track.

• Select > Save Portion, and select a section of the

track.

The current track is saved using the default output format or

your previously configured output format (Selecting an Output

Format for Saved Tracks, page 3).

Selecting an Output Format for Saved Tracks

1Select Current Track > > > Setup Tracks > Output

Format.

2Select an option:

• To save fitness information with the track, select Tracks

(FIT).

• To save track information only in a more widely compatible

format, select Tracks (GPX).

• To save to both output formats, select Both (GPX/FIT).

Navigating Using TracBack®

While navigating, you can navigate back to the beginning of your

track. This can be helpful when finding your way back to camp

or the trail head.

1Select Current Track > > TracBack.

The map displays your route with a magenta line, start point,

and end point.

2Navigate using the map or the compass.

Clearing the Current Track

Select > Current Track > > Clear.

Viewing Track Information

1Select Track Manager.

2Select a track.

3Select an option:

• To view the elevation plot (Elevation Plot, page 5) of

the track, select .

• To view data fields and options for the track, select .

TIP: You can select to archive the track.

• To view the track on the map, select .

TIP: You can select the information bar at the top of the

map screen to view more details about the track.

Saving a Location on a Track

1Select Track Manager.

2Select a track.

3Select .

4Select a location on the track.

5Select the information bar at the top of the screen.

Information about the location appears.

6Select > OK.

Showing Saved Tracks on the Map

You can show one or more saved tracks on the map.

Tracks 3

1Select Track Manager.

2Select a track.

3Select .

4Select Color, and select a color for the track line on the map.

5Select Show On Map.

On appears on the Show On Map option.

6Select .

7Select another track, and repeat steps 3 - 6 (optional).

8Select , and close the application drawer.

9From the main menu, select Map.

The selected tracks appear on the map.

Archived Tracks

Your device allows you to save 200 tracks and 10,000 track

points within a track. If you exceed these limits, there may not

be enough memory for your current track recording. Archiving

frees up memory for current track recording and stores archived

tracks in a different location on your drive. The number of

archived tracks you can store is limited only by the size of your

drive. You can transfer archived tracks from your device to your

computer for saving and viewing using Garmin BaseCamp™

.

You can archive saved tracks manually. In addition, you can

create archived tracks from the current track log on an

automated schedule or when the track log is full.

Archiving Tracks Automatically

You can archive tracks on an automated schedule to save

memory space.

1Select Setup > Tracks > Advanced Setup > Auto Archive.

2Select When Full, Daily, or Weekly.

Archiving Tracks Manually

You can archive saved tracks manually.

1Select Track Manager.

2Select a saved track.

3Select > .

The track moves from the saved tracks list to the archived

tracks list.

Deleting a Track

1Select Track Manager.

2Select a track.

3Select > Delete.

Navigation

Where To? Menu

You can use the Where To? menu to find a destination to

navigate to. Not all Where To? categories are available in all

areas and maps.

Navigating to a Destination

1Select Where To?.

2Select a category.

3Select a destination.

4Select Go.

Your route appears as a magenta line on the map.

5Navigate using the map (Navigating with the Map, page 4)

or compass (Navigating with the Compass, page 5).

Finding a Location by Name

1Select Where To? > Waypoints > > Spell Search.

2Enter the name or part of the name.

3Select .

Finding a Location Near Another Location

1Select Where To? > > Search Near.

2Select an option.

3Select a location.

Finding an Address

You can use optional City Navigator® maps to search for

addresses.

1Select Where To? > Addresses.

2Select the country or state, if necessary.

3Enter the city or postal code.

NOTE: Not all map data provides postal code searching.

4Select the city.

5Enter the house number.

6Enter the street.

Marking and Starting Navigation to a Man

Overboard Location

You can save a man overboard (MOB) location, and

automatically start navigation back to it.

1Select Man Overboard > Start.

The map opens showing the route to the MOB location. The

default appearance of the route is a magenta line.

2Navigate using the map (Navigating with the Map, page 4)

or compass (Navigating with the Compass, page 5).

Stopping Navigation

From the map or compass, select > Stop Navigation.

Navigating with Sight 'N Go

You can point the device at an object in the distance, lock in the

direction, and navigate to the object.

1Select Sight 'N Go.

2Point the device at an object.

3Select Lock Direction > Set Course.

4Navigate using the compass.

Navigating with the Map

1Begin navigating to a destination (Navigating to a

Destination, page 4).

2Select Map.

A blue triangle represents your location on the map. As you

travel, the blue triangle moves and leaves a track log (trail).

3Complete one or more actions:

• Drag the map to view different areas.

• Select and to zoom in and out of the map.

• Select a location on the map (represented by a pin), and

select the information bar at the top of the screen to view

information about the selected location.

Navigating a Driving Route

Before you can navigate street routes, you must purchase and

load City Navigator maps.

1Select Profile Change > Automotive.

2Select a destination.

3Navigate using the map.

Turns appear in the information bar along the top of the map.

Audible tones signal turns in the route.

4 Navigation

Optional Maps

You can use additional maps with the device, such as BirdsEye

satellite imagery, BlueChart® g2, and City Navigator detailed

maps. Detailed maps may contain additional points of interest,

such as restaurants or marine services. For more information,

go to http://buy.garmin.com or contact your Garmin dealer.

BirdsEye Imagery

You can download and view detailed satellite imagery on your

device using Garmin BaseCamp software and a BirdsEye

imagery subscription. Go to garmin.com/birdseye and

garmin.com/basecamp for more information.

Your device may include a one-year BirdsEye imagery

subscription. This subscription is not available in all areas or for

all device models.

3D Map View

Before you can use this feature, you must purchase maps that

contain 3D information.

Select 3D View.

Select to increase the elevation of the viewing angle.

Select to decrease the elevation of the viewing angle.

Select to pan the 3D map forward.

Select to pan the 3D map backward.

Select to rotate the view to the left.

Select to rotate the view to the right.

Navigating with the Compass

When navigating to a destination, points to your destination,

regardless of the direction you are moving.

1Begin navigating to a destination (Navigating to a

Destination, page 4).

2Select Compass.

3Turn until points toward the top of the compass, and

continue moving in that direction to the destination.

Calibrating the Compass

NOTICE

Calibrate the electronic compass outdoors. To improve heading

accuracy, do not stand near objects that influence magnetic

fields, such as vehicles, buildings, and overhead power lines.

Your device was already calibrated at the factory, and the

device uses automatic calibration by default. If you experience

irregular compass behavior, for example, after moving long

distances or after extreme temperature changes, you can

manually calibrate the compass.

1Select Compass > > Calibrate Compass > Start.

2Follow the on-screen instructions.

Course Pointer

The course pointer is most useful if you are navigating on water

or where there are no major obstacles in your path. It also can

also help you avoid hazards to either side of the course, such as

shoals or submerged rocks.

To enable the course pointer, from the compass, select Setup >

Heading > Go To Line/Pointer > Course (CDI).

The course pointer À indicates your relationship to the course

line leading to the destination. The course deviation indicator

(CDI) Á provides the indication of drift (right or left) from the

course. The scale  refers to the distance between dots à on

the course deviation indicator, which tell you how far off course

you are.

Elevation Plot

By default, the elevation plot displays the elevation over the

distance traveled. To customize the elevation settings, see

Altimeter Settings, page 11. You can touch any point on the

plot to view details about that point.

Navigating to a Point on the Plot

1Select Elevation Plot.

2Select an individual point on the plot.

Details about the point appear.

3Select > View Map.

4Select the information bar at the top of the screen.

5Select Go.

The map opens with your route marked with a magenta line.

6Navigate using the map (Navigating with the Map, page 4) or

compass (Navigating with the Compass, page 5).

Changing the Plot Type

You can change the elevation plot to display pressure and

elevation over time or distance.

1Select Elevation Plot > Change Plot Type.

2Select an option.

Resetting the Elevation Plot

Select Elevation Plot > > Reset > Clear Current Track >

Clear.

Calibrating the Barometric Altimeter

Your device was already calibrated at the factory, and the

device uses automatic calibration by default. You can manually

calibrate the barometric altimeter if you know the correct

elevation or the correct barometric pressure.

1Go to a location where the elevation or barometric pressure

is known.

2Select Elevation Plot > > Calibrate Altimeter.

3Follow the on-screen instructions.

Trip Computer

The trip computer displays your current speed, average speed,

maximum speed, trip odometer, and other helpful statistics. You

can customize the trip computer layout, dashboard, and data

fields.

Navigation 5

From the main menu, select Trip Computer.

Resetting the Trip Computer

For accurate information, reset the trip information before

beginning a trip.

Select Trip Computer > > Reset > Reset Trip Data >

Reset.

Routes

A route is a sequence of waypoints or locations that leads you to

your final destination.

Creating a Route

1Select Route Planner > Create Route > Select First Point.

2Select a category.

3Select the first point in the route.

4Select Use > Select Next Point.

5Repeat steps 2–4 to add all the points in the route.

6Select to save the route.

Editing the Name of a Route

1Select Route Planner.

2Select a route.

3Select Change Name.

4Enter the new name.

Editing a Route

1Select Route Planner.

2Select a route.

3Select Edit Route.

4Select a point.

5Select an option:

• To view the point on the map, select Review.

• To change the order of the points on the route, select

Move Up or Move Down.

• To insert an additional point on the route, select Insert.

The additional point is inserted before the point you are

editing.

• To remove the point from the route, select Remove.

6Select to save the route.

Viewing a Route on the Map

1Select Route Planner.

2Select a route.

3Select View Map.

Deleting a Route

1Select Route Planner.

2Select a route.

3Select Delete Route.

Viewing the Active Route

1While navigating a route, select Active Route.

2Select a point in the route to view additional details.

Reversing a Route

You can switch the start and end points of your route to navigate

the route in reverse.

1Select Route Planner.

2Select a route.

3Select Reverse Route.

Garmin Adventures

You can create adventures to share your journeys with family,

friends, and the Garmin community. You can group related

items together as an adventure. For example, you can create an

adventure for your latest hiking trip. The adventure could contain

the track log of the trip, photos of the trip, and geocaches you

hunted. You can use BaseCamp to create and manage your

adventures. For more information, go to adventures.garmin.com.

NOTE: BaseCamp is not available for all device models.

Creating an Adventure

Before you can create an adventure and send it to your device,

you must download BaseCamp to your computer and transfer a

track from your device to your computer (Sending Files to

BaseCamp, page 14).

1Open BaseCamp.

2Select File > New > Garmin Adventure.

3Select a track, and select Next.

4If necessary, add items from BaseCamp.

5Complete the required fields to name and describe the

adventure.

6If you want to change the cover photo for the adventure,

select Change, and select a different photo.

7Select Finish.

Starting an Adventure

Before you can start an adventure, you must send an adventure

from BaseCamp to your device (Sending Files to BaseCamp,

page 14).

1Select Adventures.

2Select an adventure.

3Select Start.

Camera and Photos

NOTE: This feature is available only for models that include a

camera.

When you take a photo, the geographic location is saved with

the photo information. You can navigate to the location.

Taking a Photo

1Select Camera.

2Turn the device horizontally or vertically to change the

orientation of the photo.

3If necessary, select or to zoom in or out.

4Hold to focus and hold the device still.

A white frame appears on the screen. The device focuses on

the object inside of the frame. When the photo is in focus, the

frame turns green.

5Release to take a photo.

Adjusting the Camera Lighting Mode

You can change the camera mode to take clearer photos in

different lighting situations.

1Select Camera > .

2Select an option:

• To take photos in low light environments, select Low

Light Mode.

• To take photos in brightly lit environments, select

Standard Mode.

6 Camera and Photos

Viewing Photos

You can view photos you took with the camera and photos you

transferred to the device.

1Select Photo Viewer.

2Select a photo.

3If necessary, select or to zoom in or out.

Viewing a Slideshow

1Select Photo Viewer.

2Select a photo.

3Select > View Slideshow.

Sorting Photos

1Select Photo Viewer > > Sort Photos.

2Select an option:

• Select Most Recently.

• Select Near A Location, and select a location.

• Select On A Specific Date, and enter a date.

Viewing the Location of a Photo

1Select Photo Viewer.

2Select a photo.

3Select > View Map.

Navigating to a Photo

1Select Photo Viewer.

2Select a photo.

3Select > View Information > Go.

Setting a Photo as Wallpaper

You can select a photo for the home screen background.

1Select Photo Viewer.

2Select a photo.

3Select > Set As Wallpaper.

Deleting a Photo

1Select Photo Viewer.

2Select a photo.

3Select > Delete Photo > Delete.

Geocaches

A geocache is like a hidden treasure. Geocaching is when you

hunt for hidden treasures using GPS coordinates posted online

by those hiding the geocache.

Downloading Geocaches

1Connect the device to your computer using a USB cable.

2Go to www.geocaching.com/play.

3If necessary, create an account.

4Sign in.

5Follow the on-screen instructions to find and download

geocaches to your device.

Filtering the Geocache List

You can filter your geocache list based on certain factors, such

as the level of difficulty.

1Select Geocaching > Quick Filter.

2Select items to filter.

3Customize the settings, and select .

4Select an option:

• To apply the filter to the geocache list, select Search.

• To save the filter, select .

Creating and Saving a Geocache Filter

You can create and save custom filters for geocaches based on

specific factors. After you set up the filter, you can apply it in the

geocaches list.

1Select Setup > Geocaching > Filter Setup > Create Filter.

2Select items to filter.

3Select an option:

• To apply the filter to the geocache list, select Search.

• To save the filter, select . After it is saved, the filter is

automatically named. You can access the custom filter

from the geocaches list.

Editing a Custom Geocache Filter

1Select Setup > Geocaching > Filter Setup.

2Select a filter.

3Select an item to edit.

Navigating to a Geocache

1Select Geocaching > Find a Geocache.

2Select a geocache.

3Select Go.

4Navigate using the map (Navigating with the Map, page 4) or

compass (Navigating with the Compass, page 5).

Logging the Attempt

Before you can log an attempt to find a geocache, you must

start navigating to the geocache (Navigating to a Geocache,

page 7).

After attempting to find a geocache, you can log your results.

1Select Geocaching > Log Attempt.

2Select Found, Did Not Find, or Needs Repair.

3Select an option:

• To begin navigation to the next geocache nearest you,

select Find Next Closest.

• To stop logging, select Done.

• To enter a comment about looking for the cache or about

the cache itself, select Edit Comment, enter a comment,

and select .

chirp™

A chirp is a small Garmin accessory that is programmed and left

in a geocache. You can use your device to find a chirp in a

geocache. For more information about the chirp, see the chirp

Owner's Manual at www.garmin.com.

Enabling chirp Searching

1Select Setup > Geocaching.

2Select chirp Searching > On.

Finding a Geocache with a chirp

1Select Geocaching > Find a Geocache.

2Select a geocache.

3Select Go.

4Navigate using the map (Navigating with the Map, page 4) or

compass (Navigating with the Compass, page 5).

When you are within approximately 32.9 ft (10 m) of the

geocache that contains a chirp, details about the chirp

appear.

5If necessary, select Geocaching > Show chirp Details.

6If available, select Go to navigate to the next stage of the

geocache.

Geocaches 7

Applications

Sending and Receiving Data Wirelessly

Before you can share data wirelessly, you must be within 10 feet

(3 m) of a compatible device.

Your device can send and receive data when paired with

another compatible device or smartphone using ANT+® wireless

technology. You can share waypoints, geocaches, routes, and

tracks.

NOTE: This feature is not available for all device models.

1Select Share Wirelessly.

2Select an option:

• Select Send, and select a type of data.

• Select Receive to receive data from another device. The

other compatible device must be attempting to send data.

3Follow the on-screen instructions.

Setting a Proximity Alarm

Proximity alarms alert you when you are within a specified range

of a particular location.

1Select Proximity Alarms > Create Alarm.

2Select a category.

3Select a location.

4Select Use.

5Enter a radius, and select .

When you enter an area with a proximity alarm, the device

sounds a tone.

Calculating the Size of an Area

1Select Area Calculation > Start.

2Walk around the perimeter of the area you want to calculate.

3Select Calculate when finished.

Using the Calculator

The device has a standard calculator and a scientific calculator.

Select Calculator.

Viewing the Calendar and Almanacs

You can view device activity, such as when a waypoint was

saved, and almanac information for the sun and moon, and

hunting and fishing.

1Select an option:

• To view device activity for specific days, select Calendar.

• To view the sunrise, sunset, moonrise, and moonset

information, select Sun and Moon.

• To view the predicted best times for hunting and fishing,

select Hunt and Fish.

2If necessary, select or to view a different month.

3Select a day.

Setting an Alarm

If you are not currently using the device, you can set the device

to turn on at a specific time.

1Select Alarm Clock.

2Select and to set the time.

3Select Turn Alarm On.

4Select an option.

The alarm sounds at the selected time. If the device is off at

the alarm time, the device turns on and sounds the alarm.

Starting the Countdown Timer

1Select Alarm Clock > > Timer.

2Select and to set the time.

3Select Start Timer.

Opening the Stopwatch

Select Stopwatch.

Satellite Page

The satellite page shows your current location, GPS accuracy,

satellite locations, and signal strength.

Changing the Satellite View

1Select Satellite > .

2If necessary, select Track Up to orient the satellite view with

your current track toward the top of the screen.

3If necessary, select Multicolor to assign a specific color to

the satellite and to the signal strength bar of that satellite.

Turning Off GPS

Select Satellite > > Use With GPS Off.

Simulating a Location

1Select Satellite > > Use With GPS Off.

2Select > Set Location On Map.

3Select a location.

4Select Use.

ANT+ Sensors

Pairing Your ANT+ Sensors

Before you can pair, you must put on the heart rate monitor or

install the sensor.

The device is compatible with the heart rate monitor, GSC™

10

speed and cadence sensor, and tempe™

wireless temperature

sensor. You can customize a data field to display sensor data.

1Bring the device within range (3 m) of the sensor.

NOTE: Stay 10 m away from other ANT+ sensors while

pairing.

2Select Setup > ANT Sensor.

3Select your sensor.

4Select Search for new.

When the sensor is paired with your device, the sensor status

changes from Searching to Connected.

Tips for Pairing ANT+ Accessories with Your Garmin

Device

• Verify that the ANT+ accessory is compatible with your

Garmin device.

• Before you pair the ANT+ accessory with your Garmin

device, move 10 m (32.9 ft.) away from other ANT+

accessories.

• Bring the Garmin device within range 3 m (10 ft.) of the ANT+

accessory.

• After you pair the first time, your Garmin device automatically

recognizes the ANT+ accessory each time it is activated. This

process occurs automatically when you turn on the Garmin

device and only takes a few seconds when the accessories

are activated and functioning correctly.

• When paired, your Garmin device receives data from only

your accessory, and you can go near other accessories.

8 Applications

tempe

The tempe is an ANT+ wireless temperature sensor. You can

attach the sensor to a secure strap or loop where it is exposed

to ambient air, and therefore, provides a consistent source of

accurate temperature data. You must pair the tempe with your

device to display temperature data from the tempe.

Displaying tempe Data

When displaying tempe data for the first time, you should

complete these tasks to customize the device and data fields.

1Pair your tempe sensor (Pairing Your ANT+ Sensors,

page 8).

2Customize data fields to display the temperature data

(Customizing the Data Fields, page 9).

You can select the current temperature from the Current

Status category. You can select the minimum and maximum

temperatures for a 24-hour period from the Other category.

Displaying Heart Rate Data

When displaying heart rate data for the first time, you should

complete these tasks to customize the device and data fields.

1Pair your heart rate monitor (Pairing Your ANT+ Sensors,

page 8).

2Customize a data field to display the heart rate (Customizing

the Data Fields, page 9).

You can select the heart rate data field from the Current

Status category.

Customizing the Device

Activity Profiles

Activity profiles are a collection of settings that optimize your

device based on how you are using it. For example, the settings

and data screens are different when you are using the device for

running than for riding your bike.

When you are using a profile and you change settings such as

data fields or alerts, the changes are saved automatically as part

of the profile.

Selecting a Profile

When you change activities, you can change the setup of the

device by changing the profile.

1Select Profile Change.

2Select a profile.

Creating a Custom Profile

You can customize your settings and data fields for a particular

activity or trip.

1Select Setup > Profiles > Create New Profile > OK.

2Customize your settings and data fields.

Editing a Profile Name

1Select Setup > Profiles.

2Select a profile.

3Select Edit Name.

4Enter the new name.

Deleting a Profile

NOTE: Before you can delete the active profile, you must

activate a different profile. You cannot delete a profile while it is

active.

1Select Setup > Profiles.

2Select a profile.

3Select Delete.

Customizing the Main Menu

• Hold any icon on the main menu or application drawer, and

drag it to a new location.

• Open the application drawer, and drag an icon up to the main

menu.

• Select Setup > Main Menu, and follow the on-screen

instructions.

Creating a Shortcut

1Select Setup > Shortcuts > Create Shortcut.

2Select Name, and enter a name.

3Select Icon, and select an icon.

4Select Profile, and assign the shortcut to a specific profile.

5Select an option:

• Select Setup to add a shortcut to a specific device setting.

• Select Where To? to add a shortcut that begins

navigation to a specific waypoint.

• Select Application to add a shortcut to a specific

application.

6Select the item.

Adding a Shortcut to the Main Menu

You can add shortcuts to the main menu, application drawer, or

favorites. If the shortcut does not appear in the list, you can

create it (Adjusting the Backlight Brightness, page 2).

1Select Setup > Shortcuts.

2Select the shortcut.

3Select Add To Menu.

4Select Main Menu, Drawer, or Favorites.

Custom Data Fields and Dashboards

Data fields display information about your location or other

specified data. Dashboards are a custom grouping of data that

can be helpful to a specific or general task, such as geocaching.

You can customize the data fields and dashboards of the map,

compass, trip computer, elevation plot, and the status page.

Enabling the Map Data Fields

You can enable multiple small data fields or one large data field.

1Select Map > > Setup Map > Dashboard.

2Select Small Data Fields or Large Data Field.

Empty data fields appear on the map.

Customizing the Data Fields

Before you can change the map data fields, you must enable

them (Enabling the Map Data Fields, page 9).

You can customize the data fields and dashboards of the map,

compass, trip computer, elevation plot, and status pages.

1From a page that displays data fields, select a data field.

2Select a data field category and a data field.

For example, select Trip Data > Speed - Moving Avg..

Customizing Dashboards

1Open a page that contains a dashboard you can customize.

2Select an option:

• From the map, select > Setup Map > Dashboard.

• From the compass, trip computer, or status page, select

> Change Dashboard.

3Select a dashboard.

Customizing the Device 9

Changing the Units of Measure

You can customize units of measure for distance and speed,

elevation, depth, temperature, pressure, and vertical speed.

1Select Setup > Units.

2Select a measurement type.

3Select a unit of measure.

Locking the Screen Orientation

The default setting allows the screen to change orientation

automatically based on the device orientation. You can lock the

screen orientation in portrait or landscape mode.

1Select Setup > Display > Orientation Lock.

2Select an option.

Adjusting the Backlight Timeout

You can decrease the backlight timeout to maximize the battery

life.

1Select Setup > Display > Backlight Timeout.

2Select an option.

Turning On Battery Save Mode

You can use battery save mode to prolong the battery life.

Select Setup > Display > Battery Save > On.

In battery save mode, the screen shuts off when the backlight

times out. You can select to turn on the screen, and you can

double tap to view the status page.

Adjusting the Volume

Before you can adjust the volume, you must attach headphones

or use the auto mount.

1Select .

2Use the slider bar to adjust the volume.

System Settings

Select Setup > System.

Satellite: Sets the satellite system to GPS, GPS + GLONASS

(GPS and GLONASS, page 10), or Demo Mode (GPS off).

WAAS/EGNOS: Sets the system to Wide Area Augmentation

System/European Geostationary Navigation Overlay Service

(WAAS/EGNOS). For more information about WAAS, go to

garmin.com/aboutGPS/waas.html.

Text Language: Sets the text language on the device.

NOTE: Changing the text language does not change the

language of user-entered data or map data.

Voice Language: Allows you to change the voice language.

Interface: Sets the format of the serial interface.

Configure Power Key: Allows you to assign shortcuts to the

power key (Customizing the Power Key, page 10).

GPS and GLONASS

The default satellite system setting is GPS + GLONASS, which

offers increased performance in challenging environments and

faster position acquisition. Using GPS and GLONASS can

reduce battery life more quickly than using GPS only.

Serial Interface Settings

Select Setup > System > Interface.

Garmin Spanner: Allows you to use the device USB port with

most NMEA 0183-compliant mapping programs by creating a

virtual serial port.

Garmin Serial: Sets the device to use a Garmin proprietary

format to exchange waypoint, route, and track data with a

computer.

NMEA In/Out: Sets the device to use standard NMEA 0183

output and input.

Text Out: Provides simple ASCII text output of location and

velocity information.

RTCM: Allows the device to accept Differential Global

Positioning System (DGPS) information from a device

supplying Radio Technical Commission for Maritime Services

(RTCM) data in an SC-104 format.

Customizing the Power Key

You can configure the power key as a shortcut to a menu,

setting, application, or status page. You can configure the

shortcut to trigger with a single or double tap of the power key.

1Select Setup > System > Configure Power Key.

2Select Single Tap or Double Tap.

3Select an item to display when you tap the power key:

• To display the status page, select Status Page.

• To display a specific application, shortcut, or setting,

select Menu Item, browse for the item, and select the

item.

• To turn off the shortcut, select None.

Display Settings

Select Setup > Display.

Backlight Timeout: Sets the length of time before the backlight

turns off.

Orientation Lock: Locks the screen orientation in portrait or

landscape mode, or allows the screen to change orientation

automatically based on the device orientation.

Screen Capture: Allows you to save the image on the device

screen.

Battery Save: Saves the battery power and prolongs the battery

life by turning off the screen when the backlight times out

(Turning On Battery Save Mode, page 10).

Calibrate Screen: Calibrates the screen if the screen does not

properly respond to touches.

Appearance Settings

Select Setup > Appearance.

Mode: Sets a light background, a dark background, or

automatically switches between the two based on the sunrise

and sunset time for your current location.

Background: Sets the background image.

Day Highlight Color: Sets the color for the selections made

when in day mode.

Night Highlight Color: Sets the color for the selections made

when in night mode.

Landscape Controls: Places the controls on the left or right

side of the screen when in landscape mode.

Map Settings

Select Setup > Map.

Map Information: Enables or disables the maps currently

loaded on the device.

Orientation: Adjusts how the map is shown on the page. North

Up shows North at the top of the page. Track Up shows your

current direction of travel toward the top of the page.

Automotive Mode shows an automotive perspective with the

direction of travel at the top.

Dashboard: Sets a dashboard to display on the map. Each

dashboard shows different information about your route or

your location.

Guidance Text: Sets when the guidance text is shown on the

map.

10 Customizing the Device

Map Speed: Adjusts the speed at which the map is drawn. A

faster map drawing speed decreases the battery life.

Advanced Map Settings

Select Setup > Map > Advanced Setup.

Auto Zoom: Turns auto zoom on or off.

Detail: Sets the amount of detail shown on the map. Showing

more detail may cause the map to redraw more slowly.

Shaded Relief: Shows detail relief on the map (if available) or

turns off shading.

Vehicle: Sets the position icon, which represents your position

the map. The default icon is a small blue triangle.

Zoom Levels: Adjusts the zoom level at which map items will

appear. The map items do not appear when the map zoom

level is higher than the selected level.

Text Size: Sets the text size for map items.

Camera Settings

Select Setup > Camera.

Photo Resolution: Sets the resolution of the photos.

Save Photos To: Sets the photo storage location.

Camera Instructions: Displays brief instructions about taking

photos.

Tracks Settings

Select Setup > Tracks.

Track Log: Turns track recording on or off.

Record Method: Sets a track recording method. Auto records

the tracks at a variable rate to create an optimum

representation of your tracks.

Interval: Sets a track log recording rate. Recording points more

frequently creates a more-detailed track, but fills the track log

faster.

Auto Archive: Sets an automatic archive method to organize

your tracks. Tracks are saved and cleared automatically.

Color: Changes the color of the track line on the map.

Time Settings

Select Setup > Time.

Time Format: Sets the device to show time in a 12-hour or 24-

hour format.

Time Zone: Sets the time zone for the device. Automatic sets

the time zone automatically based on your GPS position.

Position Format Settings

NOTE: You should not change the position format or the map

datum coordinate system unless you are using a map or chart

that specifies a different position format.

Select Setup > Position Format.

Position Format: Sets the position format in which a location

reading appears.

Map Datum: Sets the coordinate system on which the map is

structured.

Map Spheroid: Shows the coordinate system the device is

using. The default coordinate system is WGS 84.

Heading Settings

You can customize the compass settings.

Select Setup > Heading.

Display: Sets the type of directional heading shown on the

compass.

North Reference: Sets the north reference used on the

compass.

Go To Line/Pointer: Allows you to use the bearing pointer that

points in the direction of your destination, or use the course

pointer that shows your relationship to the course line leading

to the destination.

Compass: Automatically switches from an electronic compass

to a GPS compass when you are traveling at a higher rate of

speed for a period of time.

Calibrate Compass: Allows you to calibrate the compass if you

experience irregular compass behavior, for example, after

moving long distances or after extreme temperature changes.

See Calibrating the Compass, page 5.

Altimeter Settings

Select Setup > Altimeter.

Auto Calibration: Automatically calibrates the altimeter each

time the device is turned on. The device continues to

automatically calibrate the altimeter as long as the device has

GPS signals acquired.

Barometer Mode: Variable Elevation allows the barometer to

measure changes in elevation while you are moving. Fixed

Elevation assumes the device is stationary at a fixed

elevation, so the barometric pressure should only change

due to weather.

Pressure Trending: Sets how the device records pressure

data. Save Always can be useful when you are watching for

pressure fronts.

Plot Type: Records elevation changes over a period of time or

distance, records barometric pressure over a period of time,

or records ambient pressure changes over a period of time.

Calibrate Altimeter: Allows you to calibrate the barometric

altimeter if you know the correct elevation or the correct

barometric pressure. See Calibrating the Barometric

Altimeter, page 5.

Geocaching Settings

Select Setup > Geocaching.

Geocache List: Allows you to display the geocache list by

names or codes.

Geocache Style: Sets the display style for geocache data.

chirp Searching: Allows the device to search for a geocache

containing a chirp accessory (Enabling chirp Searching,

page 7).

Program chirp: Programs the chirp accessory. See the chirp

owner's manual at www.garmin.com.

Filter Setup: Allows you to create and save custom filters for

geocaches based on specific factors (Creating and Saving a

Geocache Filter, page 7).

Found Geocaches: Allows you to edit the number of geocaches

found. This number automatically increases as you log a find

(Logging the Attempt, page 7).

Routing Settings

The device calculates routes optimized for the type of activity

you are doing. The available routing settings vary based on the

activity selected.

Select Setup > Routing.

Navigation Voice: Sets the voice and language for navigation

prompts.

Activity: Sets an activity for routing. The device calculates

routes optimized for the type of activity you are doing.

Route Transitions: Sets how the device routes from one point

on the route to the next. This setting is available only for

some activities. Distance routes you to the next point on the

route when you are within a specified distance of your current

point.

Customizing the Device 11

Lock On Road: Locks the blue triangle, which represents your

position on the map, onto the nearest road.

Fitness Settings

Select Setup > Fitness.

Auto Lap: Sets the device to automatically mark the lap at a

specific distance.

User: Sets the user profile information (Setting Your Fitness

User Profile, page 12).

HR Zones: Sets the five heart rate zones for fitness activities.

FIT Activity: Sets the fitness activity to running, cycling, or

other. This allows your running activity to appear as a running

activity when you transfer it to Garmin Connect™

.

Setting Your Fitness User Profile

The device uses information that you enter about yourself to

calculate accurate data. You can modify the following user

profile information: gender, age, weight, height, and lifetime

athlete (About Lifetime Athletes, page 12).

1Select Setup > Fitness > User.

2Modify the settings.

About Lifetime Athletes

A lifetime athlete is an individual who has trained intensely for

many years (with the exception of minor injuries) and has a

resting heart rate of 60 beats per minute (bpm) or less.

About Heart Rate Zones

Many athletes use heart rate zones to measure and increase

their cardiovascular strength and improve their level of fitness. A

heart rate zone is a set range of heartbeats per minute. The five

commonly accepted heart rate zones are numbered from 1 to 5

according to increasing intensity. Generally, heart rate zones are

calculated based on percentages of your maximum heart rate.

Fitness Goals

Knowing your heart rate zones can help you measure and

improve your fitness by understanding and applying these

principles.

• Your heart rate is a good measure of exercise intensity.

• Training in certain heart rate zones can help you improve

cardiovascular capacity and strength.

• Knowing your heart rate zones can prevent you from

overtraining and can decrease your risk of injury.

If you know your maximum heart rate, you can use the table

(Heart Rate Zone Calculations, page 12) to determine the best

heart rate zone for your fitness objectives.

If you do not know your maximum heart rate, use one of the

calculators available on the Internet. Some gyms and health

centers can provide a test that measures maximum heart rate.

The default maximum heart rate is 220 minus your age.

Setting Your Heart Rate Zones

Before the device can determine your heart rate zones, you

must set up your fitness user profile (Setting Your Fitness User

Profile, page 12).

You can manually adjust the heart rate zones according to your

fitness goals (Fitness Goals, page 12).

1Select Setup > Fitness > HR Zones.

2Enter the maximum and minimum heart rate for zone 5.

The maximum heart rate for each zone is based on the

minimum heart rate of the previous zone. For example, if you

enter 167 as a minimum heart rate for zone 5, the device

uses 166 as the maximum rate for zone 4.

3Enter your minimum heart rate for zones 4-1.

Heart Rate Zone Calculations

Zone % of

Maximum

Heart Rate

Perceived Exertion Benefits

1 50–60% Relaxed, easy pace,

rhythmic breathing

Beginning-level

aerobic training,

reduces stress

2 60–70% Comfortable pace,

slightly deeper

breathing, conversation

possible

Basic cardiovascular

training, good

recovery pace

3 70–80% Moderate pace, more

difficult to hold

conversation

Improved aerobic

capacity, optimal

cardiovascular training

4 80–90% Fast pace and a bit

uncomfortable, breathing

forceful

Improved anaerobic

capacity and

threshold, improved

speed

5 90–100% Sprinting pace,

unsustainable for long

period of time, labored

breathing

Anaerobic and

muscular endurance,

increased power

Running or Cycling with Your Device

Before you go for a run or ride using the device, you must

change the profile to fitness (Selecting a Profile, page 9).

You can customize your dashboards and data fields for your

fitness activities (Custom Data Fields and Dashboards, page 9).

1If your device is currently recording a track, select Current

Track > .

You can save or delete the current track.

2Select Setup > Tracks > Output Format.

3Select an option:

• Select GPX to record your activity as a traditional track

that can be viewed on the map and used for navigation.

• Select FIT to record your activity with fitness information

(for example, laps) that is tailored for Garmin Connect.

• Select Both to record your data in both formats

simultaneously. This setting uses more memory space.

4From the main menu, select Stopwatch > Start.

5Go for a run or ride.

6When finished, select Stop.

7Select Reset > Save.

Marine Settings

Select Setup > Marine.

Marine Chart Mode: Sets the type of chart the device uses

when displaying marine data. Nautical displays various map

features in different colors so the marine POIs are more

readable and so the map reflects the drawing scheme of

paper charts. Fishing (requires marine maps) displays a

detailed view of bottom contours and depth soundings and

simplifies map presentation for optimal use while fishing.

Appearance: Sets the appearance of marine navigation aids on

the map.

Marine Alarm Setup: Sets alarms for when you exceed a

specified drift distance while anchored, when you are off

course by a specified distance, and when you enter water of

a specific depth.

Setting Up Marine Alarms

1Select Setup > Marine > Marine Alarm Setup.

2Select an alarm type.

3Select On.

4Enter a distance, and select .

12 Customizing the Device

Setting the Device Tones

You can customize tones for messages, keys, turn warnings,

and alarms.

1Select Setup > Tones > Tones > On.

2Select a tone for each audible type.

Resetting Data

You can reset trip data, delete all waypoints, clear the current

track, or restore default values.

1Select Setup > Reset.

2Select an item to reset.

Restoring Default Values for Specific Settings

1Select Setup.

2Select an item to reset.

3Select > Restore Defaults.

Restoring Default Values for Specific Page Settings

You can restore the default values for settings for the map,

compass, trip computer, and elevation plot.

1Open the page for which you will restore the settings.

2Select > Restore Defaults.

Restoring All Default Settings

You can reset all settings back to the factory default settings.

Select Setup > Reset > Reset All Settings > Yes.

Device Maintenance

Support and Updates

Garmin Express™

(garmin.com/express) provides easy access to

these services for Garmin devices.

• Product registration

• Product manuals

• Software updates

• Data uploads to Garmin Connect

Updating the Software

NOTE: Updating the software does not erase any of your data

or settings.

1Connect your device to a computer using the USB cable.

2Go to garmin.com/express.

3Follow the on-screen instructions.

Device Care

NOTICE

Do not store the device where prolonged exposure to extreme

temperatures can occur, because it can cause permanent

damage.

Never use a hard or sharp object to operate the touch screen, or

damage may result.

Avoid chemical cleaners and solvents that can damage plastic

components.

Secure the weather cap tightly to prevent damage to the mini-

USB port.

Cleaning the Device

1Wipe the device using a cloth dampened with a mild

detergent solution.

2Wipe it dry.

Cleaning the Touchscreen

1Use a soft, clean, lint-free cloth.

2If necessary, lightly dampen the cloth with water.

3If using a dampened cloth, turn off the device and disconnect

the device from power.

4Gently wipe the screen with the cloth.

Water Immersion

NOTICE

The device is waterproof to IEC Standard 60529 IPX7. It can

withstand immersion in 1 meter of water for 30 minutes.

Prolonged submersion can cause damage to the device. After

submersion, be certain to wipe dry and air dry the device before

using or charging.

Data Management

NOTE: The device is not compatible with Windows® 95, 98, Me,

Windows NT®, and Mac® OS 10.3 and earlier.

File Types

The handheld device supports these file types:

• Files from BaseCamp or HomePort™

. Go to www.garmin.com

/trip_planning.

• GPX track files.

• GPX geocache files (Downloading Geocaches, page 7).

• JPEG photo files.

• GPI custom POI files from the Garmin POI Loader. Go to

www.garmin.com/products/poiloader.

• FIT files for exporting to Garmin Connect.

Installing a Memory Card

You can install a microSD™

memory card for additional storage

or pre-loaded maps.

1Turn the D-ring counter-clockwise, and pull up to remove the

cover.

2Remove the batteries.

3In the battery compartment, slide the card holder À to the left

and lift up.

4Place the memory card Á with the gold contacts facing down.

5Close the card holder.

6Slide the card holder to the right to lock it.

7Replace the batteries.

8Replace the battery cover, and turn the D-ring clockwise.

Connecting the Device to Your Computer

NOTICE

To prevent corrosion, thoroughly dry the mini-USB port, the

weather cap, and the surrounding area before charging or

connecting to a computer.

Device Maintenance 13

Before you can connect the straight connector of the USB cable

to your device, you may have to remove optional mount

accessories.

1Pull up the weather cap from the mini-USB port.

2Plug the small end of the USB cable into the mini-USB port.

3Plug the large end of the USB cable into a computer USB

port.

Your device and memory card (optional) appear as

removable drives in My Computer on Windows computers

and as mounted volumes on Mac computers.

Transferring Files to Your Device

1Connect the device to your computer.

On Windows computers, the device appears as a removable

drive or a portable device, and the memory card may appear

as a second removable drive. On Mac computers, the device

and memory card appear as mounted volumes.

NOTE: Some computers with multiple network drives may not

display device drives properly. See your operating system

documentation to learn how to map the drive.

2On your computer, open the file browser.

3Select a file.

4Select Edit > Copy.

5Open the portable device, drive, or volume for the device or

memory card.

6Browse to a folder.

7Select Edit > Paste.

The file appears in the list of files in the device memory or on

the memory card.

Sending Files to BaseCamp

1Open BaseCamp.

2Connect the device to your computer.

On Windows computers, the device appears as a removable

drive or a portable device, and the memory card may appear

as a second removable drive. On Mac computers, the device

and memory card appear as mounted volumes.

NOTE: Some computers with multiple network drives may not

display device drives properly. See your operating system

documentation to learn how to map the drive.

3Open the Garmin or memory card drive or volume.

4Select an option:

• Select an item from a connected device and drag it to My

Collection or to a list.

• From BaseCamp, select Device > Receive from Device,

and select the device.

Deleting Files

NOTICE

If you do not know the purpose of a file, do not delete it. Your

device memory contains important system files that should not

be deleted.

1Open the Garmin drive or volume.

2If necessary, open a folder or volume.

3Select a file.

4Press the Delete key on your keyboard.

Disconnecting the USB Cable

If your device is connected to your computer as a removable

drive or volume, you must safely disconnect your device from

your computer to avoid data loss. If your device is connected to

your Windows computer as a portable device, it is not necessary

to safely disconnect.

1Complete an action:

• For Windows computers, select the Safely Remove

Hardware icon in the system tray, and select your device.

• For Mac computers, drag the volume icon to the trash.

2Disconnect the cable from your computer.

Resetting the Device

If the device stops responding, you may need to reset it. This

does not erase any of your data or settings.

1Remove the batteries.

2Reinstall the batteries.

Removing the Battery Pack

WARNING

Do not use a sharp object to remove batteries.

1Turn the D-ring counter-clockwise, and pull up to remove the

cover.

2Pull up on the side of the battery pack closest to the power

button.

Device Information

Specifications

Battery type Lithium-ion battery pack or three AA batteries

(alkaline, NiMH, or lithium)

Water resistance IEC 60529 IPX7*

Operating temperature

range

From -20° to 70°C (from -4° to 158°F)

Charging temperature

range

From 0° to 45°C (from 32° to 113°F)

*The device withstands incidental exposure to water of up to 1 m

for up to 30 min.

About the Batteries

WARNING

See the Important Safety and Product Information guide in the

product box for product warnings and other important

information.

The temperature rating for the device may exceed the usable

range of some batteries. Alkaline batteries can rupture at high

temperatures.

NOTICE

Alkaline batteries lose a significant amount of their capacity as

the temperature decreases. Therefore, use lithium batteries

when operating the device in below freezing conditions.

Viewing Device Information

You can view the unit ID, software version, and license

agreement.

Select Setup > About.

Getting More Information

You can find more information about this product on the Garmin

website.

• Go to www.garmin.com/outdoor.

• Go to http://buy.garmin.com, or contact your Garmin dealer

for information about optional accessories and replacement

parts.

14 Device Information

Troubleshooting

How do I know my device is in USB mass

storage mode?

• View your device screen.

An image of the device connected to a computer appears.

• View your computer screen.

A new removable disk drive appears in My Computer on

Windows computers, or a mounted volume appears on Mac

computers.

I need to reset all settings back to factory

default values

Select Setup > Reset > Reset All Settings.

I need replacement parts or accessories

• Go to buy.garmin.com.

• Contact your Garmin dealer.

I need to buy an external GPS antenna

• Go to buy.garmin.com.

• Contact your Garmin dealer.

My battery does not stay charged for very

long

You can take various actions to increase your battery life.

• Exit the camera application when you are not taking photos.

• Decrease the backlight brightness (Adjusting the Backlight

Brightness, page 2).

• Decrease the backlight timeout (Adjusting the Backlight

Timeout, page 10).

• Enable battery save mode (Display Settings, page 10).

• Select the Normal option for the Map Speed (Map Settings,

page 10).

My device does not appear as either a

portable device or a removable drive or

volume on my computer

1Disconnect the USB cable from your computer.

2Turn off the device.

3Connect the USB cable to your device and to a USB port on

your computer.

TIP: The USB cable must connect to a USB port on your

computer, not to a USB hub.

The device turns on automatically and goes into MTP mode or

USB mass storage mode. A picture of the device connected to a

computer appears on the device screen.

NOTE: If you have several network drives mapped on your

computer, Windows may have trouble assigning drive letters to

your Garmin drives. For information about assigning drive

letters, see the help file for your operating system.

My device is not acquiring satellite signals

• Take your device out of parking garages and away from tall

buildings and trees.

• Remain stationary for several minutes.

My device does not charge

• Verify the battery pack is properly installed (Installing the

Battery Pack, page 1).

• Verify the temperature is between 0 and 45°C (from 32°F to

113°F).

• Turn down the backlight (Adjusting the Backlight Brightness,

page 2).

My device does not go into mass storage

mode automatically

If your device is connected to the computer but does not go into

mass storage mode automatically, you might have loaded a

corrupt file.

1Disconnect the device from your computer.

2Turn off the device.

3Hold while you connect the device to your computer.

4Continue holding for 30 seconds or until the device goes

into mass storage mode.

My screen does not respond

If your touchscreen does not respond to your touches, you can

reset your device.

1Disconnect the device from external power.

2Remove the batteries.

3Reinstall the batteries (Installing the Battery Pack, page 1).

This resets the device without erasing your data or settings.

Appendix

Optional Accessories

Optional accessories, such as mounts, maps, fitness

accessories, and replacement parts, are available at

http://buy.garmin.com or from your Garmin dealer.

Data Fields

Some data fields require you to be navigating or require ANT+

accessories to display data.

24hr Max Temperature: The maximum temperature recorded in

the last 24 hours.

24hr Min Temperature: The minimum temperature recorded in

the last 24 hours.

Accuracy Of GPS: The margin of error for your exact location.

For example, your GPS location is accurate to within +/- 12

feet (3.65 m).

Alarm Timer: The current time of the countdown timer.

Ambient Pressure: The uncalibrated environmental pressure.

Ascent - Average: The average vertical distance of ascent

since the last reset.

Ascent - Maximum: The maximum rate of ascent in feet per

minute or meters per minute since the last reset.

Ascent - Total: The total elevation distance ascended since the

last reset.

Automotive Turn: The direction of the next turn in the route.

You must be navigating for this data to appear.

Average Cadence: The average cadence for the current

activity.

Average Heart Rate: The average heart rate for the current

activity.

Average Lap: The average lap time for the current activity.

Avg. Heart Rate Percent: The average percentage of maximum

heart rate for the current activity.

Barometer: The calibrated current pressure.

Battery Level: The remaining battery power.

Bearing: The direction from your current location to a

destination. You must be navigating for this data to appear.

Troubleshooting 15

Cadence: The revolutions of the crank arm or strides per

minute. Your device must be connected to a cadence

accessory.

Calories: The amount of total calories burned.

Compass Heading: The direction the device is pointing based

on the compass.

Course: The direction from your starting location to a

destination. Course can be viewed as a planned or set route.

You must be navigating for this data to appear.

Current Lap: The stopwatch time for the current lap.

Date: The current day, month, and year.

Depth: The depth of the water. Your device must be connected

to a NMEA 0183 device capable of acquiring the water depth.

Descent - Average: The average vertical distance of descent

since the last reset.

Descent - Maximum: The maximum rate of descent in feet per

minute or meters per minute since the last reset.

Descent - Total: The total elevation distance descended since

the last reset.

Distance To Destination: The remaining distance to the final

destination. You must be navigating for this data to appear.

Distance To Next: The remaining distance to the next waypoint

on the route. You must be navigating for this data to appear.

Elapsed (Total) Time: The total time recorded. For example, if

you start the timer and run for 10 minutes, then stop the timer

for 5 minutes, then start the timer and run for 20 minutes,

your elapsed time is 35 minutes.

Elevation: The altitude of your current location above or below

sea level.

Elevation Above Ground: The altitude of your current location

above ground level.

Elevation - Maximum: The highest elevation reached since the

last reset.

Elevation - Minimum: The lowest elevation reached since the

last reset.

ETA At Destination: The estimated time of day you will reach

the final destination (adjusted to the local time of the

destination). You must be navigating for this data to appear.

ETA At Next: The estimated time of day you will reach the next

waypoint on the route (adjusted to the local time of the

waypoint). You must be navigating for this data to appear.

Glide Ratio: The ratio of horizontal distance traveled to the

change in vertical distance.

Glide Ratio To Dest: The glide ratio required to descend from

your current position to the destination elevation. You must

be navigating for this data to appear.

GPS Elevation: The altitude of your current location using GPS.

GPS Heading: The direction you are moving based on GPS.

GPS Signal Strength: The strength of the GPS satellite signal.

Grade: The calculation of rise (elevation) over run (distance).

For example, if for every 10 feet (3 m) you climb you travel

200 feet (60 m), the grade is 5%.

Heading: The direction you are moving.

Heart Rate: Your heart rate in beats per minute (bpm). Your

device must be connected to a compatible heart rate monitor.

Heart Rate Percent Max: The percentage of maximum heart

rate.

Heart Rate Zone: The current range of heart rate (1 to 5). The

default zones are based on your user profile, maximum heart

rate, and resting heart rate.

Lap Ascent: The vertical distance of ascent for the current lap.

Lap Cadence: The average cadence for the current lap.

Lap Descent: The vertical distance of descent for the current

lap.

Lap Distance: The distance traveled for the current lap.

Lap Heart Rate: The average heart rate for the current lap.

Lap Heart Rate Percent: The average percentage of maximum

heart rate for the current lap.

Laps: The number of laps completed for the current activity.

Lap Speed: The average speed for the current lap.

Last Lap Ascent: The vertical distance of ascent for the last

completed lap.

Last Lap Cadence: The average cadence for the last

completed lap.

Last Lap Descent: The vertical distance of descent for the last

completed lap.

Last Lap Distance: The distance traveled for the last completed

lap.

Last Lap Heart Rate: The average heart rate for the last

completed lap.

Last Lap Speed: The average speed for the last completed lap.

Last Lap Time: The stopwatch time for the last completed lap.

Location (lat/lon): The current position in latitude and longitude

regardless of the selected position format setting.

Location (selected): The current position using the selected

position format setting.

Location of Destination: The position of your final destination.

You must be navigating for this data to appear.

None: This is a blank data field.

Odometer: A running tally of distance traveled for all trips. This

total does not clear when resetting the trip data.

Off Course: The distance to the left or right by which you have

strayed from the original path of travel. You must be

navigating for this data to appear.

Pointer: An arrow points in the direction of the next waypoint or

turn. You must be navigating for this data to appear.

Speed: The current rate of travel.

Speed Limit: The reported speed limit for the road. Not

available in all maps and in all areas. Always rely on posted

road signs for actual speed limits.

Speed - Maximum: The highest speed reached since the last

reset.

Speed - Moving Avg.: The average speed while moving since

the last reset.

Speed - Overall Avg.: The average speed while moving and

stopped since the last reset.

Stopwatch Timer: The stopwatch time for the current activity.

Sunrise: The time of sunrise based on your GPS position.

Sunset: The time of sunset based on your GPS position.

Temperature: The temperature of the air. Your body

temperature affects the temperature sensor.

Temperature - Water: The temperature of the water. Your

device must be connected to a NMEA 0183 device capable

of acquiring the water temperature.

Time of Day: The current time of day based on your current

location and time settings (format, time zone, daylight saving

time).

Time To Destination: The estimated time remaining before you

reach the destination. You must be navigating for this data to

appear.

Time To Next: The estimated time remaining before you reach

the next waypoint in the route. You must be navigating for

this data to appear.

16 Appendix

To Course: The direction in which you must move to get back

on the route. You must be navigating for this data to appear.

Total Lap: The stopwatch time for all the completed laps.

Track Distance: The distance traveled for the current track.

Trip Odometer: A running tally of the distance traveled since

the last reset.

Trip Time: A running tally of the total time spent moving and not

moving since the last reset.

Trip Time - Moving: A running tally of the time spent moving

since the last reset.

Trip Time - Stopped: A running tally of the time spent not

moving since the last reset.

Turn: The angle of difference (in degrees) between the bearing

to your destination and your current course. L means turn

left. R means turn right. You must be navigating for this data

to appear.

Velocity Made Good: The speed at which you are closing on a

destination along a route. You must be navigating for this

data to appear.

Vertical Dist to Dest: The elevation distance between your

current position and the final destination. You must be

navigating for this data to appear.

Vertical Dist to Next: The elevation distance between your

current position and the next waypoint in the route. You must

be navigating for this data to appear.

Vertical Speed: The rate of ascent or descent over time.

Vertical Speed To Dest: The rate of ascent or descent to a

predetermined altitude. You must be navigating for this data

to appear.

Waypoint At Dest: The last point on the route to the

destination. You must be navigating for this data to appear.

Waypoint At Next: The next point on the route. You must be

navigating for this data to appear.

Appendix 17

Index

Symbols

3D 5

map 5

A

accessories 8, 14, 15

addresses, finding 4

adventures 6

alarms

clock 8

marine 12

proximity 8

almanac

hunting and fishing times 8

sunrise and sunset times 8

altimeter 5, 11

ANT+ sensors, pairing 8

area calculation 8

B

backlight 2, 10

barometer 5

BaseCamp 6, 13, 14

battery 1, 14

charging 1

installing 1

maximizing 2, 10, 15

BirdsEye imagery 5

C

calculator 8

calendar 8

calibrating

altimeter 5

compass 5

camera 6

setting 6

settings 11

charging 1, 15

chirp 7, 11

City Navigator 4

cleaning the device 13

cleaning the touchscreen 13

compass 4, 5

navigating 5

settings 11

computer, connecting 13, 15

countdown timer 8

course, pointer 5

customizing the device 9

cycling 12

D

dashboards 9

data, transferring 13

data fields 9, 15

deleting, all user data 14

device

care 13

registration 2

resetting 14

display settings 10

downloading, geocaches 7

E

elevation 5

plot 5

F

files, transferring 7, 13, 14

fitness 12

G

Garmin Express

registering the device 13

updating software 13

geocaches 7, 13

downloading 7

settings 11

GLONASS 10

GPS 8, 10

signal 2

H

heading setting 11

heart rate

monitor 9

zones 12

HomePort 13

hunting and fishing times 8

K

keys 1

L

lifetime athlete 12

locations

editing 2

saving 2

locking, screen 2, 10

M

main menu 2, 9

man overboard (MOB) 4

maps 2, 4

data fields 9

navigating 3

optional 5

settings 10, 11

updating 13

marine

alarms setup 12

settings 12

memory card 13

microSD card 1, 13. See memory card

N

navigation 4, 5

compass 5

road 4

stopping 4

O

on-screen buttons 2

P

pairing, ANT+ sensors 8

photos 6, 7

taking 6

viewing 7

wallpaper 7

position format 11

power key 2

shortcuts 10

product registration 2, 13

profiles 9, 12

proximity alarms 8

R

registering the device 2, 13

replacement parts 15

resetting the device 13–15

restoring, settings 13

routes 6

creating 6

deleting 6

editing 6

settings 11

viewing on the map 6

running 12

S

satellite signals 2, 8

screen 2

locking 2, 10

orientation 10

settings 10–13

device 11

sharing data 8

shortcuts 9

adding 9

Sight N' Go 4

smartphone 8

software, updating 13

specifications 14

stopwatch 8

storing data 13

sunrise and sunset times 8

system settings 10

T

tempe 9

Tempe 9

temperature 9

time settings 11

time zones 11

timer, countdown 8

tones 13

touchscreen 2

troubleshooting 15

TracBack 3

tracks 2–4, 6

archiving 4

color 3

saving 3

settings 11

viewing 3

transferring

files 7, 8, 13, 14

tracks 8

trip computer 5, 6

trip information, viewing 5

trip planner. See routes

troubleshooting 13–15

U

unit ID 14

units of measure 10

updating software 13

USB 10, 15

connector 1

disconnecting 14

mass storage mode 13, 15

transferring files 13

user data, deleting 14

user profile 12

V

volume, adjusting 10

W

water resistance 13

waypoints 2, 4

deleting 3

editing 2, 3

projecting 3

saving 2

Where To? 4

18 Index

www.garmin.com/support

+43 (0) 820 220230 + 32 2 672 52 54

0800 770 4960 1-866-429-9296

+385 1 5508 272

+385 1 5508 271

+420 221 985466

+420 221 985465

+ 45 4810 5050 + 358 9 6937 9758

+ 331 55 69 33 99 + 39 02 36 699699

(+52) 001-855-792-7671 0800 0233937

+47 815 69 555 00800 4412 454

+44 2380 662 915

(+35) 1214 447 460 +386 4 27 92 500

0861 GARMIN (427 646)

+27 (0)11 251 9999 +34 93 275 44 97

+ 46 7744 52020 +886 2 2642-9199 ext 2

0808 238 0000

+44 (0) 870 8501242

+49 (0) 89 858364880

zum Ortstarif - Mobilfunk

kann abweichen

913-397-8200

1-800-800-1020

© 2015 Garmin Ltd. or its subsidiaries