goodbetterbest EX3PS3 BLUETOOTH HEADSET User Manual USERS MANUAL

Goodbetterbest Limited BLUETOOTH HEADSET USERS MANUAL

USERS MANUAL

EX-03 BLUETOOTH® HEADSET FOR PS3™
EXCLUSIVELY DESIGNED FOR GAMING ON PS3™
thank you
Thank you for purchasing the EX-03 Bluetooth® Headset for PS3™ from Gioteck. We hope that this product will
go beyond your expectations for a quality made accessory. Please read this booklet thoroughly before using the
product and review the PS3™ manual for additional details regarding PS3™ operation. Thank you & enjoy!
precautions
This product has been designed
with the highest concern for safety.
However, any electrical device, if used
improperly, has the potential to
cause harm. To help ensure risk-free
operation please pay attention
to the following guidelines.
•Use only as intended. This is a
precision product, handle with care.
•Contains small parts. Not suitable for
children under 3 years of age.
•Store in a dry & dust free area.
Do not store in areas of extreme
heat or cold, and avoid direct
sunlight or heat sources eg. heaters.
•Do not allow the product to get wet or
dirty; doing so may cause damage.
•Do not clean with benzene, paint
thinner, acetone, alcohol, or other
such solvents.
•Do not take the product apart;
doing so will void your warranty and
may cause electrical shock.
warnings
This symbol indicates important
installation, operational or
maintenance instructions. Always
follow these instructions closely.
environment
Please help to conserve the
environment by recycling the
inner cardboard packaging of
this product.
This headset should NOT
be disposed of in normal
household waste. It should be
disposed of separately. Please
take it to an electrical waste
collection point.
02 | CONTENTS & PRECAUTIONS
CONTENTS
02 | Contents & Precautions
03 | Features & Details
04 | Pairing
06 | Setup
08 | Charging
09 | Operation
10 | Troubleshooting
11 | Legals
features & details
When it comes to online game & chat, the EX-03 is a natural gaming partner. Comfortable, lightweight
& ergonomic, the EX-03 features the latest Next Gen Chipset with built-in noise cancelling technology and
superior enhanced voice clarity.
01 | Flexible Wired Earhook
02 | LED Feedback
03 | Volume Up
04 | Power Button
05 | Volume Down
06 | Microphone
07 | Earbud
FEATURES & DETAILS | 03
01
02
03
04
05
06
07
pairing your headset
04 | PAIRING
1. Within the Settings' menu,
press X on Accessory Settings.
4. At the next screen, prepare your
headset (from o) to be paired
by holding down the power button
continuously until the LEDs flash
alternate Blue & Red. When it
is connected the LEDs will flash
Blue every 2 seconds. If not
connected, it will flash blue
every 4 seconds.
2. Press X on the icon labelled:
Manage Bluetooth® Device.
5. Press X to Start Scanning.
Once the scan is complete,
the PS3™ will recognise all
Bluetooth® wireless technology
devices within range.
3. Press X on Yes to register
your Bluetooth® Device.
6. Locate PS3 EX-03 from the list
of available devices and press X.
3
SECONDS
PAIRING | 05
7. Press X, enter 0000 (four zeros)
as the Pass Key & press X on OK.
10. Scroll down and press X on
Audio Device Settings.
8. You will be taken to a new screen
stating: Register completed.
11. Choose PS3 EX-03 as your input
and output device from the lists.
Press X to confirm your choices.
9. Press O twice on your controller
to go back to Accessory Settings.
12. Scroll down and press X on OK.
Your EX-03 Bluetooth® Headset
is now ready to use.. Enjoy :)
set up
The EX-03 Bluetooth® headset is designed for maximum flexibility and comfort. You can mold the earhook to size
and choose from 3 dierent earbuds for the perfect fit. Simply follow the instructions below for details.
06 | SET UP
ear bud fitting
Take the size of ear bud that you want
to use and place the ear bud on the back
edge of the stalk (01). Apply pressure
then roll the ear bud onto the stalk of
the earpiece (02).
01
02
03
SET UP | 07
headset positioning
For a comfortable fit, hold the EX-03 body (01) and flex the earhook
upwards (02) looping it around your ear (03). Once the earhook is in
position, carefully place the speaker into your ear (04) and make any
final adjustments so that the headset is firmly in position.
Finally, maneuver the microphone arm into place where you feel it
oers maximum voice clarity.
01
02
04
EX-03 BODY
08 | CHARGING
charging your headset
The headset contains a rechargeable Lithium-ion battery. Prior to using the headset for the first time, it is
strongly recommended to fully charge the battery for 3 hours.
Connect the USB cable to your PS3™ (01) and insert the DC connector (02) into the headset (03). The LED will
illuminate red during the charging process and will be blue when fully charged. NOTE: Charging indication will be
delayed for a few minutes if the headset has not been used for a long time.
game time
The fully charged battery oers up to
6 hours continuous use. It is advisable
to always recharge aer lengthy
gameplay so the headset is fully
charged for the next round.
charging time
Normally the battery will be fully
recharged within 3 hours. As soon as
the battery is fully charged, the LED
will be Blue.
Do not try
to pair the
headset to
the console,
when the
headset is
charging. If it
is charging,
it will not
pair to
the PS3™.
01
02 03
operating your headset
1. To power on your headset, press and hold the power button until the LED flashes Blue.
NOTE: If the LED flashes Red only, the battery will need to be charged. A low battery is also
denoted by a low tone repeated every 20 seconds.
2. To power o your headset, press and hold the power button until the LED flashes Red.
OPERATION | 09
adjusting volume
Tap the + button to increase the volume
in increments until the headset reaches
your desired volume level.
Tap the - button to decrease the volume
in increments until the headset reaches
your desired volume level.
muting
Press the power button briefly (less
than 1 second) to mute the headset;
repeat the process to un-mute.
When in mute mode the LED will flash
Red & Blue every 5 seconds.
If at any point
the headset
disconnects
from the PS3™
press lightly
on the power
button to
reconnect.
VOLUME DECREASE (-)
VOLUME INCREASE (+)
POWER / MUTE / RECONNECT
10 | TROUBLESHOOTING
troubleshooting
Having trouble with your EX-03 Next Gen Bluetooth® Headset? These troubleshooting steps will show you the
smoothest path to resolving your issue. Be sure to perform troubleshooting before returning your headset.
The PS3™ is unable find the headset.
•Make sure that your headset is in pairing mode (see page 4).
•If the headset has been paired with another Bluetooth® device before, the PS3™
will have trouble finding the headset. Either remove the headset from the paired
device or turn o the Bluetooth® functionality on the paired device.
•Turn o / remove any other active wireless devices in the vicinity (eg. router,
mouse, keyboard, DECT phones) to prevent signal interference.
The headset will not activate aer being charged.
•To activate the headset, the battery needs to charge for at least 40 minutes. It is
highly recommended to fully charge the battery for the full 3 hours before use.
•The headset will only charge when the PS3™ is switched on.
No indication of charging is shown.
•Charging indication may be delayed for a few minutes if the headset has not been
used for a long time (more than a month) or if the battery is drained.
No sound can be heard from the headset.
•Make sure that your headset has been activated in Audio Device Settings and that
your volume is set correctly (page 5).
•Make sure that the paired devices are within 33 Ft (10 metres) of each other.
•Make sure that the headset is turned on and fully charged.
•Check In-game settings.
I’d like to put the EX-03 on my le ear.
•Unfortunately this is not possible.
For further assistance please contact our customer support team on our
website: www.gioteck.com
LEGALS | 11
legals
This product complies with the following legal regulations. For further information go to www.gioteck.com
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) this device
may not cause harmful interference,
and (2) this device must accept
any interference received, including
interference that may cause undesired
operation. The device and its antenna
must not be co-located or operating in
conjunction with any other antenna or
transmitter. Gioteck are not responsible
for any interference caused by
unauthorized changes to this equipment.
Gioteck hereby declares that this
headset is in compliance with the
essential requirements and other
provisions of Directive 1999/E/EC.
To view the full version of the
Declaration of Conformity please
go online to doc.gioteck.com.
FCC WARNING
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
NOTE 1: The manufacturer is not responsible for any changes or modifications not expressly
approved by the manufacturer for compliance, such modifications could void the user’s authority
to operate the equipment.

Navigation menu