goodbetterbest FL300 Bluetooth Headset User Manual
Goodbetterbest Limited Bluetooth Headset
User Manual
EN
EN
21
02
03 04
01
Thank you for buying the Gioteck FL300 Gaming Headset &
Bluetooth® Speakers. These Headphones are designed to be
convenient, stylish and provide high quality audio Playback from
any Bluetooth® enabled Audio Device or wired only device.
The FL300 can also be used as portable Bluetooth® stereo speakers
for enjoying music with friends or listening to movies together.
The FL300 can also be used to receive telephone calls while in use
and will automatically pause the audio playback in order to receive
the call and when the call ends audio Playback will resume.
Please read this User Guide thoroughly before use so
that you can understand the setup and functions.
CONTENTS
Please check your package contains the following items:
01] FL300 Gaming Headset & Bluetooth® Speakers
02] 3.5MM Audio Cable
03] USB Charging Cable
04] User Guide
Before using the headset, turn the volume down to a mid-level or
very low, then slowly adjust it to a comfortable level. Exposure
to high volume sound levels may cause temporary or permanent
damage to your hearing. You should always set your volume to
moderate levels and avoid long exposure to high volume levels.
• Contains small parts. Not suitable for children under 7 years of age.
• Store in a dry & dust free area.
• Do not store in areas of extreme low (0°C) or high (40°C) temperatures.
• Avoid direct sunlight and heat sources.
• Do not allow the product to get wet or dirty; doing so may cause damage.
• Do not clean with benzene, paint thinner, acetone,
alcohol, or other such solvents.
• Do not take the product apart; doing so will void your warranty and
may cause electrical shock or damage to internal components.
• Please help to conserve the environment by recycling
the cardboard packaging of this product.
• This product should NOT be disposed of in normal
household waste. It should be disposed of separately.
Please take it to an electrical waste collection point.
This product is covered by a one [1] year warranty.
For full Terms and Conditions, and for Technical Assistance,
go to : www.gioteck.com/contact-support
Activate your product warranty: www.gioteck.com/register
PRECAUTIONS
For help with the set-up or operation of this product please
go to: GIOTECK.COM/CONTACT-SUPPORT
EN
EN
43
04
02
05
06
07
08
09
10
01
03
SETUP
Note: Please fully charge the battery before using for the first time. See
“Charging the Headphones” section of this User Guide for details.
TURNING THE HEADPHONES ON/OFF
To turn the Headphones ON simply hold down the Power Button for 5
seconds. The status LED Indicator on the earcup will flash three times,
and you will hear a “Power On” voice through the Headphones.
To turn the Headphones OFF simply hold down the Power Button for 5
seconds. The status LED Indicator on the earcup will flash three times,
and you will hear a “Power Off” voice through the Headphones.
Please note: To conserve power, if the headset is not connected to a device
for approximately 10 minutes, the headset will turn off automatically.
To reactivate the Headphone just push the power button.
CONNECTING WITH BLUETOOTH®
1] Turn ON the Headphones using the Power Button
and keep the button held down for 5 seconds.
2] The headphones will automatically pair with the previously paired
BT device within 10 seconds. If no previously paired devices are
found, the headset will enter pairing mode. You will hear a voice
say “pairing” and the Status LED on the earcups will flash blue.
The Headphones are ready to connect to the device.
3] Go to the Bluetooth® option in the settings of your Bluetooth Audio
device or Smartphone and in the list of Devices select FL300
4] You will hear a voice say “connected”, the Headphones
are now ready to use.
CONNECTING WITH AUDIO CABLE
To connect the Headphones to devices that do not support Bluetooth®,
plug the provided 3.5MM Audio cable into the Headphone port on the left
earcup and connect the other end of the cable into the audio device.
Note: This allows you to use the Headphones in places where wireless
signals are restricted.
PRODUCT FEATURES
01] Volume Up
02] Volume Down
03] Mute Button
04] Power Button
05] Multi-Function Button
06] Microphone Indication LED
07] Retractable Boom Microphone
08] USB Charging Port
09] Audio Cable Port (Line IN)
10] Status LED
EN
EN
65
HEADPHONE FUNCTIONALITY
ADJUSTING VOLUME
Press the volume +/- key to adjust the volume. One short press will
adjust one level. When the volume is adjusted the the Headphones will
play a tone each time the volume is adjusted.
PLAY/PAUSE MUSIC
Press Multi-function Button one time to Play or Pause music.
PREVIOUS/NEXT SONG
When playing music you can press “Volume Up” button for 2 seconds to
play next song and press “Volume Down” button for 2 seconds to play
the previous song.
MUTE FUNCTION
To mute the Headphones push the Mute Button, to unmute simply
push the Button again. When the Microphone is muted the Microphone
Indication LED will turn red.
VOICE CALL FUNCTIONS
When connected to a Bluetooth® Enabled Smartphone the FL300 can
function as a hands-free headset. The operation of these features is
detailed below.
RECEIVING A PHONE CALL
If you are listening to music when there is incoming Phone call or you
are making a Phone call, the Headphones will automatically switch
the connection from the music player to the Phone. The Music will be
paused temporarily. After you end the call, the music resumes.
To answer a call, push the Multi-function Button quickly.
To end the call push the Multi-function Button quickly again.
Note: When you press Multi-function Button to answer or end a call,
please just press one time.
MAKING A PHONE CALL
1] Use the Phone’s keypad to dial the phone number.
2] Press Phones “SEND” or “OK” key. The Phone begins the call and
automatically transfers the call from the Phone to the FL300.
MICROPHONE MUTE
In a call mode, press the Mute button on the FL300 Headphones, you can
switch to open and close mute function. When in mute mode, the LED on
the boom Microphone will illuminate RED.
EN
EN
87
03
04
02
01
3.5MM
Audio Cable
HOLD
Audio Connector Jack for
Headphone/external Speaker
USING THE PORTABLE SPEAKERS
To use the External Speaker function, please follow this procedure;
1] Disconnect the fixed audio cable from the
headband and both of the earcups.
2] Remove the earcups from the headband by carefully
pulling them away from the Headband housing.
3] When the earcups are disconnected from the headband,
use the provided 3.5mm audio cable to connect the
left and right earcup speakers together through the
fixed audio cable ports on the top of the earcups.
4] To enable the External Speaker Mode, hold the multi-function
button for 2 Seconds. To change back to headphones
mode hold the multi-function button for 2 Seconds.
CHARGING THE HEADPHONES
1] To charge the Headphones, use the supplied USB cable and insert into
any powered USB Port. Normal charging process takes 2-3 hours.
2] The red LED on the left Earcup will turn on when charging
and will turn off when charging is complete.
3] Make sure the battery has been fully charged and fully released
at the first three times of use to ensure the battery the best
performance. After charging is complete, please remove the cable
from the Headphones and the USB Cable from the USB port.
Do not keep the Headphones connected to the USB port for a long time
when charging complete as this will shorten the lifetime of the Battery.
FCC WARNING
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
NOTE 1: Any changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.