goodbetterbest G300 GIOTECK PS3 HF-2 CONTROLLER User Manual Print
Goodbetterbest Limited GIOTECK PS3 HF-2 CONTROLLER Print
Users Manual
HF-2 BLUETOOTH CONTROLLER FOR PS3™
ERGONOMIC FPS CONTROLLER
MODEL G30000A
This product is not designed, manufactured, sponsored or endorsed by Sony Computer Entertainment Inc. or any of its divisions.
PS3™ is a trademark of Sony Computer Entertainment Inc. Specification & appearance are subject to change without prior notice.
Copyright © 2011 GBB Group. All Rights Reserved.
02 | CONTENTS & PRECAUTIONS FEATURES & DETAILS | 03
thank you
Thank you for purchasing the HF-2 Bluetooth Controller from Gioteck. We hope that this product will go beyond
your expectations for a quality made accessory. Please read this booklet thoroughly before using the product
and review the PS3™ manual for additional details regarding PS3™ operation. Thank you & enjoy!
features & details
The HF-2 has been ergonomically designed to enhance the "First Person Shooter" gameplay experience.
You’ll find it’s the little touches that make all the difference.
precautions
This product has been designed
with the highest concern for safety.
However, any electrical device, if used
improperly, has the potential to
cause harm. To help ensure risk-free
operation please pay attention
to the following guidelines.
• Use only as intended. This is a
precision product, handle with care.
• Contains small parts. Not suitable for
children under 3 years of age.
•
Store in a dry & dust free area.
Do not store in areas of extreme
heat or cold, and avoid direct
sunlight or heat sources eg. heaters.
• Do not allow the product to get wet
or dirty; doing so may cause damage.
• Do not clean with benzene, paint
thinner, acetone, alcohol, or other
such solvents.
• Do not take the product apart
;
doing so will void your warranty and
may cause
electrical shock
.
01 | Home Button
02 | Select Button
03 | Turbo Button
04 | Start Button
05 | Crescent with LED feedback
06 | L3 Thumbstick
07 | Buttons
08 | Directional Pad
09 | R3 Thumbstick
10 | R1 Button
11 | R2 Button
12 | L1 Button
13 | L2 Button
14 | Mini-USB Port
15 | Flip Switch
16 | Battery Compartment
02 03
01
08 09
07
04
06 05
10 12
13
14
11
15
16
warnings
This symbol indicates important
installation, operational or
maintenance instructions. Always
follow these instructions closely.
environment
Please help to conserve the
environment by recycling the
inner cardboard packaging of
this product.
This controller should NOT
be disposed of in normal
household waste. It should be
disposed of separately. Please
take it to an electrical waste
collection point.
CONTENTS
02 | Precautions
03 | Features & Details
04 | Setup
05 | Battery replacement
06 | Pairing
07 | Operation
09 | Thumbstick calibration
10 | Troubleshooting
11 | Legals
The HF-2
does not
need to
contain
batteries
to function
as a wired
device.
set up
The HF-2 Controller is very easy to set up, and for your convenience it can be used as either a wired or
wireless device. To use your controller as a wired device connect the USB to the PS3™ [01] and the mini USB to
the controller’s charging socket [02].
Using your thumb,
press in the catch on
the battery door [01].
Lift to open. Replace with new
batteries, or a
Gioteck battery pack.
Replace the
battery door.
battery replacement
To use your controller wirelessly, remove the battery compartment cover and insert two AA batteries or a
Gioteck Rechargeable battery pack.
01
02
04 | SETUP BATTERY REPLACEMENT | 05
01
06 | PAIRING OPERATION | 07
Controller assigned to port 7.
pairing your controller
The HF-2 must be paired to your PS3™ to use it wirelessly. To enable pairing, connect your controller to the
PS3™ via a USB cable and pairing will happen automatically. The pairing process can take up to 10 seconds.
Controller assigned to port 1.
The HF-2 will go into sleep mode
if not used for 10 minutes.
To wake up the controller,
press the Home button.
operation
To power on your controller, press and hold the home button for 2 seconds until a red LED appears in the
crescent. To power off your controller, press and hold the home button for 1 second.
turbo function
Pressing an action button assigned with
turbo will simulate the button being
pressed rapidly e.g. “boost firepower”.
To enable turbo function:
While pressing the Turbo button, press &
release the action button you wish to
turbo. To switch turbo off, repeat the
procedure above. NOTE: More than one
button can be assigned the turbo
function at any one time.
To clear all turbo functions:
Press & hold the Turbo button ONLY
for 12 seconds.
reassigning ports
Once paired one or two LEDs within the crescent of the controller will light
depending on which port the controller has been assigned to. To assign your
controller to a different port, go to: Accessory Settings – Reassign Controller
and scroll to assign the controller to your desired port.
08 | OPERATION
flip switch
To swap the functions assigned to the
L1 & L2 and R1 & R2 buttons simply slide
the switch from left to right.
operation
For your convenience a flip switch has been built into the body of the HF-2 controller enabling you to swap the
functions assigned to the L1 & L2 and R1 & R2 buttons.
01
THUMBSTICK CALIBRATION | 09
thumbstick calibration
The HF-2 has calibrated thumbsticks that will sharpen aim and improve accuracy during serious FPS gameplay.
If would like to change the HF-2 thumbstick sensitivity, download the latest Gioteck software from the HF-2
support pages on our website: www.gioteck.com
In the event that a system update interfers with the
operation of your controller, go to www.gioteck.com
to download the latest Gioteck updates.
10 | TROUBLESHOOTING LEGALS | 11
troubleshooting
Having trouble with your HF-2 controller? These troubleshooting steps will show you the smoothest path to
resolving your issue. Be sure to perform troubleshooting before having your product serviced.
Gioteck hereby declares that this
controller is in compliance with the
essential requirements and other
provisions of Directive 1999/E/EC. To
view the full version of the Declaration
of Conformity please go online to
doc.gioteck.com.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) this device
may not cause harmful interference,
and (2) this device must accept any
interference received, including inter-
ference that may cause undesired
operation. The device and its antenna
must not be co-located or operating in
conjunction with any other antenna or
transmitter. Gioteck are not responsible
for any interference caused by un-
authorized changes to this equipment.
This equipment generates, uses, and
can radiate radio frequency energy and,
if not installed correctly, may cause
harmful interference to radio comm-
unications. If this equipment does cause
harmful interference to radio/television
reception try the following: •Reorient
or relocate the receiving antenna.
•Increase distance between the
equipment & receiver. •Connect the
equipment into an outlet on a circuit
different from the receiver. •Consult
the dealer or a radio/TV technician.
TouchSense® Technology Licensed from
Immersion Corporation. Protected by one or
more of the following patents:
U.S. PATENTS:
5185561, 5220260, 5389865, 5459382, 5589854, 5629594,
5691898, 5721566, 5731804, 5731804, 5734373, 5767839,
5805140, 5825308, 5831408, 5844392, 5857986, 5907487,
5929607, 5929846, 5959613, 5999168, 6020875, 6020876,
6020967, 6024576, 6050718, 6057828, 6061004, 6078308,
6088017, 6088019, 6100874, 6104158, 6104382, 6128006,
6147674, 6154198, 6166723, 6184868, 6191774, 6201533,
6211861, 6219032, 6219033, 6232891, 6243078, 6246390,
6246390, 6252579, 6252583, 6256011, 6259382, 6271828,
6271833, 6275213, 6278439, 6288705, 6292170, 6292174,
6310605, 6317116, 6342880, 6343349, 6348911, 6353427,
6374255, 6380925, 6400352, 6411276, 6424333, 6424356,
6429846, 6437771, 6448977, 6469692, 6486872, 6563487,
6564168, 6580417, 6636161, 6636197, 6639581, 6661403,
6680729, 6683437, 6693622, 6693626, 6697043, 6697044,
6697048, 6704001, 6704683, 6705871, 6707443, 6715045,
6717573, 6762745, 6801008, 6816148, 6833846, 6850222,
6864877, 6894678, 6903721, 6928386, 6956558, 6982696,
6982700, 6995744, 7023423, 7024625, 7038657, 7038667,
7039866, 7061466, 7084854, 7091950, 7102541, 7106305,
7106313, 7131073, 7136045, 7148875, 7161580, 7182691,
7193607, 7199790, 7209117, 7209118, 7218310, 7236157,
7249951, 7253803, 7265750, 7283123, 7299321, 7327348,
7336260, 7336266, 7345672, 7423631, 7432910, 7439951,
7446752, 7447604, 7456821, 7460104, 7477237, 7500853,
7502011, 7535454, 7557794, 7561141, 7561142, 7564444,
7567232, 7567243, 7592999, RE40341, and RE40808”
legals
This product complies with the following legal regulations. For further information go to www.gioteck.com.
The HF-2 will not turn on.
• Check to make sure that the batteries or battery pack is fully charged.
• Make sure that the batteries are properly installed.
I am having trouble pairing my controller.
• Make sure that you have followed the instructions carefully on page 6.
NOTE:
You must plug your controller in via a USB cable to enable pairing.
The LED is flashing even though the rechargeable batteries are fully charged.
• Rechargeable batteries provide a low voltage which triggers the LED to flash.
Even at a low voltage, the batteries will still provide substantial game time.
The HF-2 is switched on but is not recognized by the PS3™.
• Make sure that the HF-2 is paired to the PS3™ (see page 6).
• Press the HOME button (the large arched button on the front) to wake the
controller up from sleep mode and reconnect.
• Make sure that you have the latest firmware installed.
The SixAxis function is not working in my game.
• The HF-2 does not have SixAxis support.
For further assistance please contact our customer support team on our
website: www.gioteck.com