i Tech Dynamic C51-A05146-XX Bluetooth Stereo Headset User Manual Manual

i.Tech Dynamic Limited Bluetooth Stereo Headset Manual

Manual

i.Tech BlueBAND RSafety Information• Check local laws regarding use of a mobile handset and Headphones while driving. If you use the Headphones while driving, ensure your attention and focus remains on your responsibility of driving safely.• Never allow children to play with the Headphones – small parts may be a choking hazard.• Observe all signs that require an electrical device or RF radio product to be switched off in designated areas. These could include hospitals, blasting areas, and potentially explosive atmospheres.• Turn off your Headphones prior to boarding an aircraft. Do not use your Headphones in an aircraft.• Never mount or store your Headphones over any air bag deployment area as serious injury may result when an air bag deploys.• Do not open or mutilate the built-in battery.• Dispose of batteries according to local regulations. Do not dispose as household waste(Back Cover)© 2005 Hutchison Harbour Ring Enterprises LimitedAll rights in this publication are reserved and no part may be reproduced without the prior written permission of the publisher. The contents of this publication are believed to be correct at the time of going to press, but any information, specifications, products or services mentioned may be modified, supplemented or withdrawn without further notice.The Stylized i.Tech logos are trademarks owned by Hutchison Harbour Ring Enterprises Limited or its affiliates.Bluetooth® and the Bluetooth logos are trademarks owned by Bluetooth SIG, Inc, USA and licensed to i.Tech Dynamic Limited.Made by i.Tech Dynamic Ltd, a wholly-owned subsidiary of Hutchinson Harbour Ring Limited.i.Tech Dynamic declares under our sole responsibility that this product is in conformity with the provisions of the following Council Directives 1999/5/EC.Please dispose of this packaging and product in accordance with the latest guidelines.i.Tech BlueBAND R OverviewGetting Started1. Volume Key (+) 6. Status Indicator2. Volume Key (-) 7. Hold Key3. Forward Key 8. Backward Key4. Play / Stop Key 9. Charging Socket5. Multifunction Button(MFB)Fig. 12 38765419To use your i.Tech BlueBAND R Headphones (“Headphones”), please follow these simple steps:• Charge your Headphones• Pair your Headphones with a Bluetooth-enabled mobile handset or music playerCharging Your HeadphonesConnect the charger to an AC wall outlet and the charger plug to the Headphones’s charging socket (fig.3). The Status indtcator will be red while charging.IMPORTANT Charging indication will be delayed for a few seconds if the headset has not been used for a long time or the battery is drained.Normal Charging TimeCharging the battery fully is normally within 3 hours. When the battery is fully charged, the Status indtcator will turn blue and remains on. Disconnect the charger from AC wall outlet and the headset. Press and hold the MFB (fig.1) for 2 seconds to turn the headset on, please refer to “Turning Your Headphones On and Off” on the next page. For pairing, please refer to “Pairing your Headphones”.Talk Time, Music Play Time & Standby TimeThe fully charged battery offers up to 8 hours talk time, music play time and up to 250 hours standby time. When no calls are in progress, the headset remains turned on in standby mode.Low BatteryWhen the headset is on and the battery becomes low, the Status indtcator flashes red and the headset emits a beep every 1 minute. Please recharge the battery as described above.Turning Your Headphones On and OffTurning On the Headphones Press and hold the MFB for 2 seconds until you hear a short beep. The status indicator will flash blue.IMPORTANT Press the MFB again each time you turn on the headset to reactivate pairing so that the connection between the headset and the mobile handset is resumed. For pairing, please refer to “Pairing Your Headphones”.Turning Off the HeadphonesPress and hold the MFB for 3 seconds until you hear a long beep. The status indicator flash stops.IMPORTANT To disconnect the Bluetooth connection, please firstly turn of your headset by pressing the MFB key.Pairing Your Headphones1. Place the Headphones and the device where they are easily viewable by no more than 1 meter apart.2. Ensure the Headphones is OFF.3. Press and hold the MFB until the Headphones Status Indicator alternately flashes blue and red.4. Activate your mobile handset’s Bluetooth function by referring to your mobile handset user guide for details.5. Set the device to search for Bluetooth devices within about 1 meter as instructed in the mobile handset user guide and select “i.Tech BlueBAND R” from the list.6. Enter the preprogrammed passkey “8888” and press “OK” to pair your Headphones and device. When the pairing is complete, the Headphones Status Indicator will flash blue rapidly for 5 times followed by a long beep.7. Go back to your device’s main menu. For certain device models, a headset / audio icon will be shown on the screen. You should now be able to make and receive calls using your Headphones and listen stereo music via your Headphones.IMPORTANT If the pairing cannot be completed within 2 minutes while the pairing mode is activated, the Headphones status indicator flashes purple red with 3 beeps and the headset is turned off. Please repeat Steps 2 to 7 to pair the headset and the mobile handset again.Using Your HeadphonesAnswering a CallWhen there is an incoming call, you will hear ringing through the Headphones. Press the MFB to accept the call or answer the call via your mobile handset in the normal way.Answering a Call when Listening to Stereo AudioPress the MFB once to answer the call and when finished, press the MFB once to resume stereo audio.If the other party you are speaking to ends the call, stereo audio will automatically resume without having to pressing the MFB.NOTE To receive stereo audio from your mobile handset or PDA, please make sure they support the Bluetooth A2DP profile.Ending a CallPress the MFB to end your call or end the call via your mobile handset in the normal way.Rejecting a CallTo reject an incoming call during ringing of the headset, press and hold the Volume Key for 2 seconds until you hear 2 beeps.Dialing from Your Mobile HandsetSimply make calls on your mobile handset in the normal way.Using Your HeadphonesVoice Dialing from Your HeadphonesIf your mobile handset is equipped with a voice dialling function, simply press the MFB on your headset and when you hear a beep, say the voice tag.IMPORTANT Please make sure to record voice tag into the mobile handset first before using voice dialling function.Last Number Redialling from Your HeadsetPress the MFB on your headset twice.IMPORTANT The above functions are only applicable to mobile handsets with Bluetooth Handsfree Profile. Functionality varies depending on the mobile handset model you have. Please refer to your mobile handset user guide for additional information.Listening to Stereo Audio from Your PC / DeviceBy connecting your Headphones to your PC through i.Tech mini Bluetooth USB Dongle v1.2, you can listen to stereo audio from your PC (please refer USB Dongle v1.2 Quick User Guide).By connecting your Headphones to your Bluetooth-enabled music devices, you can listen to stereo music from your music devices (please also refer your music player user guide).Care and MaintenanceHeadphones• Consider turning your Headphones off before placing it in your pocket or bag. If the MFB is accidentally depressed, your mobile handset may place an unintended call.• Do not expose the Headphones to liquid, moisture or humidity as it is not waterproof.• Do not use abrasive cleaning solvents to clean the Headphones.• Do not expose the Headphones to extremely high or low temperatures.• Do not dispose of the Headphones in a fire as it will result in explosion.• Do not expose your Headphones to contact with sharp objects as this will cause scratches and damage.• Do not stick anything inside the Headphones as this may damage internal components.• Do not attempt to disassemble the Headphones as it does not contain serviceable components.• If you do not use the Headphones for long periods, be sure to store it in a dry place, free from extreme temperatures and dust.Built-in Battery• Do not attempt to replace the Headphones’s battery yourself as it is in-built and is not changeable.• Charge the battery in accordance with the instruction supplied with this user guide.• Only use the manufacturer supplied charger when charging the Headphones.Charger• Only use the manufacturer supplied charger when charging the Headphones.• Do not disassemble the charger as it may expose you to dangerous voltages of other risks. Incorrect reassembly can cause electric shock when the Headphones is subsequently used.• Do not use the charger outdoors or in damp areas.• Only charge the Headphones’s built-in battery in accordance with the instructions of this user guide.• Avoid charging the Headphones in extremely high and low temperatures.TroubleshootingIf you are unable to connect your Headphones and mobile handset, please try the following:• Ensure your Headphones is turned off and is properly charged.• Ensure the Headphones is paired with your mobile handset.• Ensure your mobile handset’s Bluetooth feature is activated. Please refer to your mobile handset user guide for specific instruction.• Ensure the Headphones is within a maximum of 10 meters of your mobile handset(s) and there are no obstructions, such as walls or other electronic devices in between.If the above steps do not solve your problem, please recharge the Headphones and remove your mobile handset battery for a while.The i.Tech BlueBAND R Headphones is compliant with and adopts the Bluetooth Specification 1.2. However, interoperability between the device and other Bluetooth-enabled products is not guaranteed because it depends on compatibility. For more information on the compatibility between the device with other Bluetooth-enabled products, please check with the manufacturer or browse http://www.itechdynamic.comDeclaration of Conformity (DOC)We, i.Tech Dynamic Ltd., declare that the following product:Product Name: i.Tech BlueBAND RModel No.: C51-A05146-XXIs in conformity with the following essential requirements of Council Directive 1999/5/EC (referred to as R&TTE Directive): Article 3.1a, 3.1.b and 3.2. and the product is manufactured in accordance with Annex II of the above directive.A copy of the Declaration of Conformity can be found at:http://www.itechdynamic.comProduct SpecificationsBluetooth Specification: Version 1.2 Class 2Bluetooth Profile Supported: Headset, Handsfree, A2DP and AVRCPRange of Frequency: 2.4GHz SpectrumDimensions: 134 mm (L) x 105 mm (W) x 69 mm (H)Nominal Charging Time: Within 3 hoursTalk Time*: Up to 8 hoursMusic Play Time*: Up to 8 hoursStandby Time*: Up to 250 hoursWeight: 79.5 grams*may vary due to users’ operation mode and mobile phone settingsChargingSocket Charger Charging Your HeadphonesFig. 3The Headphones comes with a built-in rechargeable battery. Prior to using the headset, it is recommendable to charge the battery fully for the first time.Charger PlugPairing Your HeadphonesPrior to using your Headphones for the first time, you must pair it with a Bluetooth-enabled mobile handset or Music Player (The “Device”).The information on the next page describes pairing instruction for typical Bluetooth-enabled mobile handset or music player. Headphones pairing procedure is subject to different models of mobile handsets and music player.Up to 1 meterUp to 1 meterRemote Control Function (AVRCP)Play / Stop1. Press “ ” once for start music playing2. Press and hold “ ” for 3 seconds to stop the music playingVolume ControlBy pressing the “+” to increase the audio volume. By pressing the “-“ to decrease the audio volume. Total audio level is 12.ForwardBy scrolling the panel upward to skip next chapter or forward selecting the chapter.BackwardBy scrolling the panel downward to repeat last chapter or backward selecting the chapter.Contentsi.Tech BlueBAND R Overview ............................................................................... 1Wearing Your i.Tech BlueBAND R Headphones .............................................. 2Charging Your Headphones ................................................................................. 3-4 Charging Your Headphones .................................................................. 4 Normal Charging Time ........................................................................... 4 Talk Time, Music Play Time & Standby Time ................................... 4 Low Battery ............................................................................................... 4Turning Your Headphones On and Off ............................................................. 5Pairing Your Headphones .................................................................................... 6-7Using Your Headphones ....................................................................................... 8-9 Answering a Call ...................................................................................... 8 Answering a Call when Listening to Stereo Audio ........................ 8 Ending a Call .............................................................................................. 8 Rejecting a Call ......................................................................................... 8 Dialing from Your Mobile Handset .................................................... 8 Voice Dialing from Your Headphones ............................................... 9 Last Number Redialling from Your Headset ................................... 9 Listening to Stereo Audio from Your PC / Device ........................... 9Adjusting the Volume ............................................................................................ 10Remote Control Function (AVRCP) ..................................................................... 11Care and Maintenance ........................................................................................... 12-13Safety Information .................................................................................................. 14Troubleshooting ...................................................................................................... 15Declaration of Conformity (DOC) ....................................................................... 16Product Specifications ........................................................................................... 17Fig. 2 Wearing your HeadphonesWearing Your i.Tech BlueBAND R Headphones171www.itechdynamic.comPrinted in ChinaResetting / removing the pairingPress the Volume Key repeatedly until you reach the desired volume level.Adjusting the VolumeVolume Key - Volume Key +1. Connect the charger into the headphones’s charging socket.2. Press and hold any one of the Volume Keys for 20 seconds until the status indicator flashes blue and red alternately, then release it. 3. Press and hold any one of the volume keys again for 2 seconds until the status indicator flashes purple light, then release it. 4. Recharge the headset for a few seconds. The headphones is turned off and returned to the original settings. All current pairings are cleared.1161523141345121167109815.105(b)This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-Consult the dealer or an experienced radio/TV technician for help.Operation is subject to the following two conditions:1) this device may not cause interference and2) this device must accept any interference, including interference that may cause undesired operation of the device.FCC RF Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.Federal Communications Commission (FCC) Statement15.21You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.P/N S3J-51A05146-01-F(Page 17)(Page 0)(Page 1)(Page 16)(Page 15)(Page 2)(Page 3)(Page 14)(Page 13)(Page 4)(Page 5)(Page 12)(Page 11)(Page 6)(Page 7)(Page 10)(Page 9)(Page 8)

Navigation menu