i Tech Dynamic C51-A06001-XX Bluetooth Headset User Manual

i.Tech Dynamic Limited Bluetooth Headset

user manual

www.tuv.com Test Report No.: 14013762 001 Appendix 4 page 14 of 36 1.6 User Manual (Cover) i.Tech Arrow Lite User Guide Version 1 20-Jun-2006 Project No. : C51-A06001-XX
www.tuv.com Test Report No.: 14013762 001 Appendix 4 page 15 of 36 [Inside Cover] i.Tech Arrow Lite Bluetooth Headset gives you more freedom when moving around. With your Bluetooth-enabled mobile phone, the headset makes it easy for you to carry on with your tasks while making a call. i.Tech Arrow Lite Bluetooth Headset is compliant with Bluetooth Version 1.2 Class 2 specifications, and is compatible with mobile phone supporting Bluetooth Headset or Handsfree Profiles.
www.tuv.com Test Report No.: 14013762 001 Appendix 4 page 16 of 36 (Page 0) Contents Title Page i.Tech Arrow Lite Bluetooth Headset Overview 2 Getting Started 2 Charging Your Headset Normal Charging Time Talk and Standby Time Battery Low Indication 3-4 4 4 4 Turning Your Headset On and Off 5 Pairing Your Headset 6-7 Using Your Headset Answering a Call Rejecting a Call Ending a Call Muting a Built-in Microphone Dialling from Your Mobile Phone Voice Dialling from Your Headset Last Number Redialling from Your Headset Rejecting a Call (Handsfree Profile ONLY) Transferring a Call (Handsfree Profile ONLY) 8-9 8 8 8 8 9 9 9 9 9 Adjusting the Volume 10 Resetting or Removing Pairing 10 Care and Maintenance Headset Built-in Battery Charger 11-12 11 12 12 Safety Information 13 Troubleshooting 14 Declaration of Conformity (DoC) 15 Product Specifications 16
www.tuv.com Test Report No.: 14013762 001 Appendix 4 page 17 of 36 (Page 1) Jawbone Bluetooth Headset Overview - Figure 1 1 Ear Hook 2 Status Indicator 3 Multi-function Button (MFB) 4 Earphone 5 Volume Button 6 Charging Socket 7 Built-in Microphone 8 Built-in Rechargeable Battery 1 2 3 4 5 6 7 8
www.tuv.com Test Report No.: 14013762 001 Appendix 4 page 18 of 36 Getting Started (Page 2) To use your i.Tech Arrow Lite Bluetooth Headset (“the headset”), please start with the following steps below: 1. Charge your headset, and 2. Pair your headset with a Bluetooth-enabled mobile phone. Figure 2
www.tuv.com Test Report No.: 14013762 001 Appendix 4 page 19 of 36 (Page 3) Charging Your Headset Figure 3 The headset comes with a built-in rechargeable battery. Prior to using the headset for the first time, it is recommended to fully charge the battery first.
www.tuv.com Test Report No.: 14013762 001 Appendix 4 page 20 of 36 (Page 4) Insert the charger plug into the headset’s charging socket (refer to Figure 3) and plug the charger to an AC wall outlet. The status indicator will stay red during charging. IMPORTANT: Charging indication will be delayed for a few seconds if the headset has not been used for a long time or the battery is drained. Normal Charging Time It takes about three hours to fully charge the battery. When the battery is fully charged, the status indicator will turn blue and remain on. Unplug the charger from the AC wall outlet and the charger plug from the headset. Press and hold the MFB (refer to Figure 1) for two seconds to turn on the headset. Please refer to “Turning Your Headset On and Off” on the next page for details. Talk and Standby Time The fully charged battery can offer up to 10 hours of talk time and up to 200 hours of standby time. When there are no calls the headset should remain turned on in standby mode. Battery Low Indication When the battery has become low when the headset is on, the status indicator will flash red and the headset will emit a beep* every minute. Please follow the instructions describe above to recharge the battery. *If you are setting up the headset and your mobile phone in a noisy environment, we advise you to put on the earphone first so that the beep will be more audible.
www.tuv.com Test Report No.: 14013762 001 Appendix 4 page 21 of 36 (Page 5) Turning Your Headset On and Off Turning On the Headset Press and hold the MFB for two seconds until you hear a short beep. The status indicator will then flash blue. IMPORTANT: Press the MFB again each time when you want to turn on the headset to re-activate pairing so as to resume the connection between the headset and the mobile phone. For pairing, please refer to “Pairing Your Headset” section. Turning Off the Headset Press and hold the MFB for three seconds until you hear a long beep. The status indicator will stop flashing. IMPORTANT: To disconnect the Bluetooth connection, press the MFB firmly to turn off your headset. If you will not be using the headset for a while, you should consider turning off the Bluetooth function on your mobile phone as well.
www.tuv.com Test Report No.: 14013762 001 Appendix 4 page 22 of 36 (Page 6) Pairing Your Headset Figure 4 The headset works with Bluetooth-enabled mobile phones only. Prior to using and pairing your headset for the first time, please check if your mobile phone is Bluetooth-enabled. The pairing instructions for a typical Bluetooth-enabled mobile phone is explained on the next page. The headset pairing procedure may vary depending on the model of your mobile phone. Please contact the manufacturer of your mobile phone or its agent for further information.
www.tuv.com Test Report No.: 14013762 001 Appendix 4 page 23 of 36 (Page 7) Pairing Your Headset 1. Place the headset and the mobile phone where they are no more than one metre apart. 2. Ensure the headset is off. (The status indicator does not flash.) 3. Press and hold the MFB until the headset’s status indicator flashes blue and red alternately. 4. Activate your mobile phone’s Bluetooth function. Please refer to your mobile phone user guide for details. 5. Set the mobile phone to search for Bluetooth devices within the one metre range, as instructed in the mobile phone user guide, and select “i.Tech Arrow Lite” from the list. 6. Enter the pre-programmed passkey “0000” and press “OK” to pair your headset and mobile phone. When the pairing is completed, the headset’s status indicator will flash blue rapidly for five times followed by a long beep. 7. Go back to your mobile phone’s main menu. For certain mobile phone models, once the headset is activated, a headset icon will be shown on the screen. You should now be able to make and receive calls using your headset. IMPORTANT: If the pairing cannot be completed within two minutes after the pairing mode has been activated, the headset’s Status indicator will flash purple-red with three beeps, the headset will then turn off automatically. Please repeat step 2 to 7 above to pair the headset and the mobile phone again.
www.tuv.com Test Report No.: 14013762 001 Appendix 4 page 24 of 36 (Page 8) Using Your Headset Answering a Call When there is an incoming call, you will hear the ring through the earphone. Press the MFB once to accept the call or answer the call via your mobile phone in the normal way. Rejecting a Call If you do not wish to answer an incoming call, you can stop the buzzer ringing by pressing the volume key once. If you do not wish to be disturbed at all, you may consider resetting the mobile phone setting to restrict incoming calls. Please refer to your mobile phone user guide for set up details. Ending a Call Press the MFB once to end your call, or end the call via your mobile phone in the normal way. Muting a Built-in Microphone Press and hold the Volume Key for 2 seconds to mute the built in microphone and press the Volume Key for 3 seconds to deactivate the muting function while conversation. IMPORTANT: If you do not wish to be disturbed at all, you may consider resetting the mobile phone setting to restrict incoming calls. Please refer to your mobile handset user guide for set up details.
www.tuv.com Test Report No.: 14013762 001 Appendix 4 page 25 of 36 (Page 9) Using Your Headset Dialling from Your Mobile Phone Simply make calls on your mobile phone in the normal way. Voice Dialling from Your Headset If your mobile phone is equipped with the voice dialling function, simply press the MFB on your headset, and when you hear a beep say the voice tag. IMPORTANT: For voice dialling, you must record the voice tag (the person’s name) into your mobile phone first before using the voice dialling function. Please refer to your mobile phone’s user guide on how to record the voice tag. Last Number Redialling from Your Headset Press the MFB on your headset twice. IMPORTANT: The above functions are only applicable to mobile phones with Bluetooth Handsfree Profile. Functionality varies depending on the mobile phone model you have. Please refer to your mobile phone user guide for additional information. Rejecting a Call (Handsfree Profile ONLY) Press and hold the Volume Key then press the MFB key to reject the call while calls incoming. Transferring a Call (Handsfree Profile ONLY) Press and hold the Volume Key then press the MFB key to transfer the call while conversation from headset to your mobile handset.
www.tuv.com Test Report No.: 14013762 001 Appendix 4 page 26 of 36 (Page 10) Adjusting the Volume Press the volume key repeatedly until you reach the desired volume level. The listening volume may be affected by the volume setting of the caller’s phone as well. Re-adjust the listening volume again when necessary. Resetting or Removing Pairing You may reset the headset to its original settings anytime. To do this you also clear all current pairing settings. 1. Ensure the headset is off. 2. Press and hold the volume key until the status indicator flashes blue and red alternately and rapidly. 3. Release the volume key. 4. Press and hold the volume key again until you hear two beeps. 5. Recharge the headset for a few seconds. The headset is then turned off and returned to its original settings. All previous pairing settings are cleared.
www.tuv.com Test Report No.: 14013762 001 Appendix 4 page 27 of 36 (Page 11) Care and Maintenance Headset  Turn off your headset before placing it in your pocket or bag. If the MFB is accidentally depressed, your mobile phone may place an unintended call.  Do not expose the headset to liquid, moisture or humidity as it is not waterproof.  Do not use abrasive cleaners to clean the headset.  Do not expose the headset to extremely high or low temperatures.  Do not leave your headset under the hot sun for a long time.  Do not leave your headset near open flames such as cooking burners.  Do not dispose of the headset in a fire as it will result in explosion.  Do not bring your headset into contact with any sharp objects as this will cause scratches and damage.  Do not stick anything inside the headset as this may damage internal components.  Do not attempt to disassemble the headset as it does not contain serviceable components.  Do not pull or drag the earphone-wire with force.  If you will not use the headset for a long period, please store it in a dry place that is free from extreme temperatures and dust.
www.tuv.com Test Report No.: 14013762 001 Appendix 4 page 28 of 36 (Page 12) Built-in Battery  Do not attempt to replace the headset’s battery as it is in-built and is not changeable.  Charge the battery in accordance with the instructions supplied with this user guide.  Use only the charger supplied by the headset’s original manufacturer to charge the battery.. Charger  Use only the charger supplied by the headset’s original manufacturer to charge the headset. Other chargers may look the same, but they could be dangerous.  Do not attempt to disassemble the charger as it may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the headset is subsequently used.  Do not use the charger outdoors or in damp areas.  Only charge the headset’s built-in battery in accordance with the instructions described in this user guide.  Avoid charging the headset in extremely high or low temperatures.
www.tuv.com Test Report No.: 14013762 001 Appendix 4 page 29 of 36 (Page 13) Safety Information  Check and observe local laws regarding the use of a mobile phone and headset while driving. If you use the headset while driving, ensure your full attention and focus. It is your responsibility to drive safely. Consider to pull off the road before making or answering a call.  Never leave your headset above any air bag deployment area inside your car as serious injury may result when an air bag deploys.  Never allow children to play with the headset – small parts may be of choking hazard.  Observe all signs and displays that require an electrical device or RF radio product to be switched off in designated areas. These could include hospitals, blasting areas, and potentially explosive atmospheres.  Turn off your headset prior to boarding an aircraft. Do not use your headset inside an aircraft.  To prevent damage to your hearing, please do not set the listening volume too high.  Never use the headset while taking a bath.  Do not use the headset in a sauna or steam room.  Do not keep your headset near a wash basin or other wet places.  Do not use the headset outdoors in the rain.  Do not clean the headset while it is being charged. Always unplug the charger first before cleaning the headset.  Do not attempt to modify the headset for other purpose.  Do not attempt to force open or mutilate the built-in battery.  Replace the earphone when it shows signs of breaking from the wire.  Dispose of the battery according to local regulations. Do not dispose of the battery with household waste.  Disposal of the packaging and the headset should be done in accordance with the local regulations.
www.tuv.com Test Report No.: 14013762 001 Appendix 4 page 30 of 36 (Page 14) Troubleshooting If you are unable to connect your headset and mobile phone, please try the following:  Ensure your the battery is fully charged. Turn off your headset, and then turn it on again.  Ensure the headset is paired with your mobile phone.  Ensure your mobile phone’s Bluetooth function is activated. (For some phone models, a headset icon will appear on the phone’s screen.) Please refer to your mobile phone user guide for specific instructions.  Ensure the headset is within 10 metres of your mobile phone and there are no obstructions, such as walls or other electronic devices, in between. If the above suggestions do not solve your problem, please recharge the headset and remove your mobile phone battery for a while. Then start pairing again. The i.Tech Arrow Lite Bluetooth Headset is compliant with and adopts the Bluetooth Specification Version 1.2 Class 2. However, interoperability between the headset and other Bluetooth-enabled products is not guaranteed because it depends on compatibility. For more information on the compatibility between the headset with other Bluetooth-enabled products, please check with the respective manufacturer or visit http://www.itechdynamic.com
www.tuv.com Test Report No.: 14013762 001 Appendix 4 page 31 of 36
www.tuv.com Test Report No.: 14013762 001 Appendix 4 page 32 of 36 (page 15) Declaration of Conformity (DOC) We, i.Tech Dynamic Ltd., declare that the following product: Product Name: i.Tech Arrow Lite Model No.: C51-A06001-XX Is in conformity with the following essential requirements of Council Directive 1999/5/EC (referred to as R&TTE Directive): Article 3.1a, 3.1.b and 3.2. and the product is manufactured in accordance with Annex II of the above directive. A copy of the Declaration of Conformity can be found at: 
www.tuv.com Test Report No.: 14013762 001 Appendix 4 page 33 of 36 (Page 16) Product Specifications Bluetooth Specification: Version 1.2 Class 2 Bluetooth Profile Supported: Headset and Handsfree Profiles Range of Frequency: 2.4GHz spectrum Dimensions: 56 mm (L) x 20 mm (W) x 26mm (H), TBD Nominal Charging Time: Within 3 hours Talk Time*: Up to 3 hours (TBD) Standby Time*: Up to 120 hours (TBD) Weight: 12.5 grams (TBD) *May vary due to the user’s habit, different modes of operation, and mobile phone settings.
www.tuv.com Test Report No.: 14013762 001 Appendix 4 page 34 of 36 (Back Cover) © 2005 Hutchison Harbour Ring Enterprises Limited All rights in this publication are reserved and no part may be quoted or reproduced without the prior written permission of the company. The contents of this publication are believed to be correct at the time of going to print, but any information, specifications, products or services mentioned may be modified, supplemented or withdrawn without further notice. The Stylized i.Tech logos are trademarks owned by Hutchison Harbour Ring Enterprises Limited or its affiliates. Bluetooth® and the Bluetooth logos are trademarks owned by Bluetooth SIG, Inc, USA and licensed to i.Tech Dynamic Limited. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Cautions: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. i.Tech declares under our sole responsibility that the headset is in conformity with the provisions of the following Council Directives: 1999/5/EC.
www.tuv.com Test Report No.: 14013762 001 Appendix 4 page 35 of 36 Dispose of the packaging and this product in accordance with the latest provisions. Notes on Environmental Protection After the implementation of the European Directive 2002/96/EU in the national legal system, the following applies: Electrical and electronic devices must not be disposed of with domestic waste. Consumers are obliged by law to return electrical and electronic devices at the end of their service lives to the public collection points that are set up for this purpose or designated points of sale. However, such details are defined by the national law of the respective country. This symbol on the product, the instruction manual or the packaging indicates that the product is subject to these regulations. By recycling, reusing the materials, or other forms of utilizing old devices, you are making an important contribution in protecting our environment. Printed in China
www.tuv.com Test Report No.: 14013762 001 Appendix 4 page 36 of 36

Navigation menu