i Tech Dynamic C51-B307-XX Bluetooth Headset User Manual MyVoice 307 5L manual front 0610 V3
i.Tech Dynamic Limited Bluetooth Headset MyVoice 307 5L manual front 0610 V3
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1147043 |
| Application ID | elQ+ZsTwR8LOWZSEApkH4g== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 299.28kB (3740998 bits) |
| Date Submitted | 2009-07-30 00:00:00 |
| Date Available | 2009-07-30 00:00:00 |
| Creation Date | 2009-06-12 13:44:15 |
| Producing Software | Adobe PDF library 8.00 |
| Document Lastmod | 2009-06-12 13:44:15 |
| Document Title | MyVoice 307 5L manual(front)-0610-V3 |
| Document Creator | Adobe Illustrator CS3 |
77mm 45mm Bluetooth Headset 5-8 8-9 9-11 12 13-14 15-16 17-20 20 Headset Status Status Indicator Light (fig.1) • • • • • • Long blue • The light turns off • Double flash blue • The light turns off • Flash 4 blue every 15 sec until headset reconnect and timeout after 10 mins Talk and Standby Time Pairing Your Headset with a Bluetooth Mobile Phone (cont’d) A fully charged battery can offer up to 5 hours of talk time and up to 140 hours of standby time. The headset remains in standby mode after being turned on. If the pairing cannot be completed within two minutes after the pairing mode has been activated, the headset’s status indicator will stay blue five seconds and then turns to standby mode. Repeat steps 1 to 3 to pair the devices again. Pairing Your Headset with a Bluetooth Mobile Phone v2.0 + EDR Class 2 Headset and Handsfree 2.4GHz spectrum Within 3 hours Up to 5 hours Up to 140 hours 41.5 (L) x 21.3 (W) x 11.4 (H) mm / 1.63(L) x 0.84(W) x 0.45(T) inch Weight: 8.9 grams / 0.32 ounces * may vary due to the user’s habit, different modes of operation, and mobile phone settings. Button Audio Status Indicator Power ON Press and hold the MFB a short beep Flash blue light 3 times Button Power OFF Press and hold the MFB for 2 a long beep seconds Ringtone on earphone Press the MFB once Blue light for two seconds and then the light goes off Quick flashing blue light Press the MFB once Press the Volume Key once to increase/decrease by 1 step (Total 6 levels) Press the MFB once a short beep Flashing blue light Flashing blue light Answer a call End a call Adjust Volume When you turn on your headset for the first time, the headset proceeds into pairing mode, i.e. the status indicator blinks green, so that you can immediately pair it with your mobile phone. Voice Dialing* fig.1 1. Multi-function Button (MFB) • Power On / Off • Pair with mobile phone • Answer / End a call • Last number redials • Voice dialing 2. Volume • Adjust volume • Reject / Transfer a call 3. Status Indicator 4. Built-in Rechargeable Battery 5. Microphone 6. Charging Socket 7. Earpiece Audio fig.2 Use only the supplied charger / USB charging cable to charge the headset. Troubleshooting 11 12 I can hear crackling noise. To receive the best audio quality, it is recommended to wear your headset on the same side of the body as your mobile phone. I can't hear anything in my headset. • Ensure the headset is turned on and is properly charged. • Ensure the headset is properly paired with the mobile phone. • Make sure that the mobile phone is connected with the headset – if it does not connect, either refer to the mobile phone's Bluetooth menu or by pressing the MFB once (see “Using Your Headset” and “Pairing Your Headset with a Bluetooth Mobile Phone”). I can't connect my headset with my mobile phone. • Ensure your headset is turned off and is properly charged. • Ensure the headset is properly paired with your mobile phone. 13 Do not expose the headset to extremely high or low temperatures. Do not leave the headset in direct sunlight for an extended period of time. Do not leave the headset near open flames such as cooking burners. Do not dispose of the headset in a fire, as it will result in explosion. Do not bring the headset into contact with any sharp objects, as this will cause scratches and damages. Do not stick anything inside the headset, as this may damage internal components. Do not attempt to disassemble the headset as it does not contain serviceable components. If you do not plan to use the headset for a long period, please store it in a dry place that is free from extreme temperatures and dust. 18 Avoid charging the headset in extremely high or low temperatures. Button Audio Status Indicator a short beep 1. Hold the volume key and plug charging cable into the charging socket until earpiece will beep 2 times. 2. Release the volume key. 3. The headset is reset. Flashing blue light Flashing blue light Flashing blue light i.Tech Bluetooth headset is designed to work with Bluetooth devices. Due to large variability between different Bluetooth devices from different manufacturers, interoperability between the headset and all Bluetooth-enabled products is not guaranteed. Flashing blue light * Subject to mobile support 10 Charge Plug The headset comes with a built-in rechargeable battery. Prior to using the headset for the first time, it is recommended to fully charge the battery. Insert the charger’s plug into the headset’s USB charging socket and plug the mains charger to an AC wall outlet or plug to the PC/notebook. Factory Reset Last no. Redial* Double click the MFB Press and hold the Volume Reject a call* Key for 2 seconds While speaking, press and Call Transfer hold the volume Key for 2 (headset to mobile phone)* seconds While speaking, press MFB Call Transfer (mobile phone once to headset)* Flashing blue light Charging Your Headset You may reset the headset to its default settings. Resetting will also remove the pairing history of your headset with the mobile phone. Say the voice tag as soon as you hear the short beep and you must have recorded the voice tag into your mobile phone. Flashing blue light Charging Socket Function Status Indicator Charging Your Headset (cont’d) To use your MyVoice 307 Bluetooth headset (“headset”), please follow the steps below: 1. Ensure your headset is fully charged. 2. Pair your charged headset with a Bluetooth-enabled mobile phone. Using Your Headset (cont'd) Function Incoming call Function Using Your Headset (cont'd) Using Your Headset 1) Ensure the headset is off. 2) To activate the pairing mode, press and hold the headset’s MFB without releasing your finger until its status indicator showed long blue. 3) Activate your mobile phone’s Bluetooth, search Bluetooth devices, select “OTE 307” and enter the passcode “0000”. When the pairing is completed, the headset’s status indicator will flash blue light rapidly five times. ♦ Charging indication will be delayed for a few seconds if the headset has not been used for a long time or the battery is drained. ♦ 3 hours are required to fully charge the headset. Getting Started MyVoice 307 Overview Bluetooth Specification: Bluetooth Profiles Supported: Range of Frequency: Nominal Charging Time: Talk Time*: Standby Time*: Dimensions: Indicator Light Charging Fully charged Low battery Out of battery Out of Range MyVoice 307 Overview Getting Started Charging Your Headset Indicator Light Pairing Your Headset with a Bluetooth Mobile Phone Using Your Headset Resetting Your Headset / Removing the Pairing History Troubleshooting Safety Information Care and Maintenance Declaration of Conformity User Guide MyVoice 307 Product Specifications Contents 1-24 25-47 48-70 71-95 96-118 Troubleshooting (cont'd) Safety Information Safety Information (cont'd) FCC RF Radiation Exposure Statement: Care and Maintenance (cont’d) Care and Maintenance (cont’d) Care and Maintenance (cont’d) • Ensure your mobile phone’s Bluetooth feature is activated. Please refer to your mobile phone user guide for specific instruction. • Ensure the headset is within ten metres range of your mobile phone and there are no obstructions, such as walls or other electronic devices in between. If the above steps do not solve your problem, please recharge the headset and remove your mobile phone’s battery for a while. I can’t turn off the headset or the headset does not respond • You may do a “hardware reset” on your headset if you can’t turn it off or it doesn’t respond. • Plug charging cable into the charging socket, the headset is reset • Check and observe local laws regarding the use of a mobile phone and a headset while driving. If you use the headset while driving, ensure your full attention and focus. It is your responsibility to drive safely. Consider to pull off the road before making or answering a call. • Never leave your headset above any air bag deployment area inside your car as serious injury may result when an air bag deploys. • Never allow children to play with the headset – small parts may be of choking hazard. • Observe all signs and displays that require an electrical device or RF radio product to be switched off in designated areas. These could include hospitals, blasting areas, and potentially explosive atmospheres. • Turn off your headset prior to boarding an aircraft. Do not use your headset inside an aircraft. • To prevent damage to your hearing, please do not set the listening volume too high. • Do not attempt to modify the headset. • Do not keep the headset near a wash basin or other wet places. • Do not use the headset outdoors in the rain. • Do not use the headset in stormy weather. • Do not clean the headset while it is being charged. Always disconnect the charger from the headset before cleaning. • Do not attempt to force open the built-in battery. • Only charge the headset’s built-in battery in accordance with the instructions described in this user guide. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. • • • • • • Dispose of the battery and the headset according to local regulations. Do not dispose of them as household waste. Built-in Battery • Do not attempt to replace the headset’s battery as it is in-built and is not changeable. • Dispose of the battery according to local regulations. Do not dispose of the battery as household waste. • Charge the battery in accordance with the instructions supplied with this user guide. Charger • Use only the charger supplied by the headset’s original manufacturer to charge the headset. Other chargers may look similar but using them could be dangerous and could damage the headset. 19 • Do not attempt to disassemble the charger as it may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the headset is subsequently used. • Do not use the charger outdoors or in damp areas. 14 15 16 Notes on Environmental Protection Federal Communications Commission (FCC) Statement Federal Communications Commission (FCC) Statement (cont’d) After the implementation of the European Directive 2002/96/EU in the national legal system, the following applies: Electrical and electronic devices must not be disposed of with domestic waste. Consumers are obliged by law to return electrical and electronic devices at the end of their service lives to the public collection points that are set up for this purpose or designated points of sale. However, such details are defined by the national law of the respective country. This symbol on the product, the instruction manual or the packaging indicates that the product is subject to these regulations. By recycling, reusing the materials, or other forms of utilizing old devices, you are making an important contribution in protecting our environment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. 23 21 22 Care and Maintenance Headset • Turn off your headset before placing it in your pocket or bag. If the MFB is accidentally depressed, your mobile phone may place an unintended call. • Do not expose the headset to liquid, moisture or humidity, or rain as it is not waterproof. • Do not use abrasive cleaners to clean the headset. 17 2009 Hutchison Harbour Ring Enterprises Limited All rights in this publication are reserved and no part may be reproduced without the prior written permission of the publisher. The contents of this publication are believed to be correct at the time of going to press, but any information, specifications, products or services mentioned, and product I.D. shown may be modified, supplemented or withdrawn without further notice. The Stylized i.Tech logos are trademarks owned by Hutchison Harbour Ring Enterprises Limited or its affiliates. All other trademarks or registered trademarks belong to their respective owners. Dispose of the packaging and this product in accordance with the latest provisions. 06/2009 24 • • • • Declaration of Conformity We, i.Tech Dynamic Limited, declare that the following product: Product Product Name: i.Tech MyVoice 307 Model No.: C51-B307-XX is in conformity with the following essential requirements of Council Directive 1999/5/EC (referred to as R&TTE Directive): Article 3.1a, 3.1.b and 3.2. and the product is manufactured in accordance with Annex II of the above directive. A copy of the Declaration of Conformity can be found at http://www.itechdynamic.com. 20
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : Adobe XMP Core 4.1-c036 46.277092, Fri Feb 23 2007 14:17:08 Format : application/pdf Title : MyVoice 307 5L manual(front)-0610-V3 Creator Tool : Adobe Illustrator CS3 Create Date : 2009:06:12 13:44:15+09:00 Modify Date : 2009:06:12 13:44:15+08:00 Metadata Date : 2009:06:12 13:44:15+08:00 Thumbnail Width : 256 Thumbnail Height : 196 Thumbnail Format : JPEG Thumbnail Image : (Binary data 26729 bytes, use -b option to extract) Document ID : uuid:CF6DAD621257DE118902CCDBDCF6A606 Instance ID : uuid:413a6b6c-ba2e-4e9c-836c-19262cc6393f Derived From Instance ID : uuid:CE6DAD621257DE118902CCDBDCF6A606 Derived From Document ID : uuid:EFFCD56AE5BCDD119EFAD4216739F9E1 Startup Profile : Print N Pages : 1 Has Visible Transparency : False Has Visible Overprint : False Max Page Size W : 560.000013 Max Page Size H : 450.000009 Max Page Size Unit : Millimeters Font Name : ArialMT, MyriadPro-Regular, Modena-CondensedRegular, Modena-CondensedMedium, Modena-CondensedLight, Modena-CondensedBold, Verona-Regular, Verdana, TimesNewRomanPSMT Font Family : Arial, Myriad Pro, Modena Condensed Regular, Modena Condensed Medium, Modena Condensed Light, Modena Condensed Bold, Verona, Verdana, Times New Roman Font Face : Regular, Regular, Regular, Regular, Regular, Regular, Regular, Regular, Regular Font Type : Open Type, Open Type, TrueType, TrueType, TrueType, TrueType, TrueType, Open Type, Open Type Font Version : Version 3.00, Version 2.007;PS 002.000;Core 1.0.38;makeotf.lib1.7.9032, 1.0, Version 1.0; 2002; initial release, Version 1.0; 2002; initial release, Version 1.0; 2002; initial release, 1.0, Version 2.43, Version 3.00 Font Composite : False, False, False, False, False, False, False, False, False Font File Name : ARIAL.TTF, MyriadPro-Regular.otf, modena1.ttf, modcm__.ttf, modcl__.ttf, modcb__.ttf, Verona.ttf, verdana.TTF, TIMES.TTF Plate Names : Black Swatch Group Name : Default Swatch Group Swatch Group Type : 0 Swatch Colorant Swatch Name : White, Black, CMYK Red, CMYK Yellow, CMYK Green, CMYK Cyan, CMYK Blue, CMYK Magenta, C=15 M=100 Y=90 K=10, C=0 M=90 Y=85 K=0, C=0 M=80 Y=95 K=0, C=0 M=50 Y=100 K=0, C=0 M=35 Y=85 K=0, C=5 M=0 Y=90 K=0, C=20 M=0 Y=100 K=0, C=50 M=0 Y=100 K=0, C=75 M=0 Y=100 K=0, C=85 M=10 Y=100 K=10, C=90 M=30 Y=95 K=30, C=75 M=0 Y=75 K=0, C=80 M=10 Y=45 K=0, C=70 M=15 Y=0 K=0, C=85 M=50 Y=0 K=0, C=100 M=95 Y=5 K=0, C=100 M=100 Y=25 K=25, C=75 M=100 Y=0 K=0, C=50 M=100 Y=0 K=0, C=35 M=100 Y=35 K=10, C=10 M=100 Y=50 K=0, C=0 M=95 Y=20 K=0, C=25 M=25 Y=40 K=0, C=40 M=45 Y=50 K=5, C=50 M=50 Y=60 K=25, C=55 M=60 Y=65 K=40, C=25 M=40 Y=65 K=0, C=30 M=50 Y=75 K=10, C=35 M=60 Y=80 K=25, C=40 M=65 Y=90 K=35, C=40 M=70 Y=100 K=50, C=50 M=70 Y=80 K=70, C=0 M=30 Y=70 K=0, C=5 M=70 Y=90 K=0, C=5 M=90 Y=75 K=0, C=30 M=0 Y=95 K=0, C=60 M=5 Y=95 K=0, C=30 M=0 Y=10 K=0, C=60 M=10 Y=5 K=0, C=80 M=5 Y=10 K=0, K=100, K=90, K=80, K=70, K=60, K=50, K=40, K=30, K=20, K=10, K=5, AutoCAD Color Swatch Colorant Mode : CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, Unknown (GRAY), Unknown (GRAY), Unknown (GRAY), Unknown (GRAY), Unknown (GRAY), Unknown (GRAY), Unknown (GRAY), Unknown (GRAY), Unknown (GRAY), Unknown (GRAY), Unknown (GRAY), CMYK Swatch Colorant Type : PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS Swatch Colorant Cyan : 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 0.000000, 14.999998, 0.000000, 0.000000, 0.000000, 0.000000, 5.000001, 19.999999, 50.000000, 75.000000, 84.999996, 90.000004, 75.000000, 80.000001, 69.999999, 84.999996, 100.000000, 100.000000, 75.000000, 50.000000, 35.000002, 10.000002, 0.000000, 25.000000, 39.999998, 50.000000, 55.000001, 25.000000, 30.000001, 35.000002, 39.999998, 39.999998, 50.000000, 0.000000, 5.000001, 5.000001, 30.000001, 60.000002, 30.000001, 60.000002, 80.000001, 74.901998 Swatch Colorant Magenta : 0.000000, 0.000000, 100.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 90.000004, 80.000001, 50.000000, 35.000002, 0.000000, 0.000000, 0.000000, 0.000000, 10.000002, 30.000001, 0.000000, 10.000002, 14.999998, 50.000000, 94.999999, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 94.999999, 25.000000, 44.999999, 50.000000, 60.000002, 39.999998, 50.000000, 60.000002, 64.999998, 69.999999, 69.999999, 30.000001, 69.999999, 90.000004, 0.000000, 5.000001, 0.000000, 10.000002, 5.000001, 67.843097 Swatch Colorant Yellow : 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 0.000000, 0.000000, 0.000000, 90.000004, 84.999996, 94.999999, 100.000000, 84.999996, 90.000004, 100.000000, 100.000000, 100.000000, 100.000000, 94.999999, 75.000000, 44.999999, 0.000000, 0.000000, 5.000001, 25.000000, 0.000000, 0.000000, 35.000002, 50.000000, 19.999999, 39.999998, 50.000000, 60.000002, 64.999998, 64.999998, 75.000000, 80.000001, 90.000004, 100.000000, 80.000001, 69.999999, 90.000004, 75.000000, 94.999999, 94.999999, 10.000002, 5.000001, 10.000002, 67.058802 Swatch Colorant Black : 0.000000, 100.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000002, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000002, 30.000001, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 25.000000, 0.000000, 0.000000, 10.000002, 0.000000, 0.000000, 0.000000, 5.000001, 25.000000, 39.999998, 0.000000, 10.000002, 25.000000, 35.000002, 50.000000, 69.999999, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 90.196097 Swatch Colorant Gray : 255, 229, 203, 178, 152, 127, 101, 76, 50, 25, 12 Swatch Colorant Tint : 100.000000 Producer : Adobe PDF library 8.00 Page Count : 1 Creator : Adobe Illustrator CS3EXIF Metadata provided by EXIF.tools