iKeyless FDHFG000 Keyless Entry Remote User Manual Manual
iKeyless, LLC Keyless Entry Remote Manual
iKeyless >
Manual
iKeyless Confidential
FDHFL-G000
User Manual
2018/08/16
1
Ford Flip Replacement Keys
iKeyless Confidential
Remote layout variations
3 Button 4 Button
Three Button functions Four Button functions
1. Lock
1. Unlock
1. Panic
1. Lock
2. Unlock
3. Remote Start
4. Panic
2
iKeyless Confidential
Pairing Instructions
The Ford Flip Key requires industry standard equipment to program and pair to your vehicle. Please contact a locksmithing
professional to pair this key to your vehicle. For help or assistance, please contact technical support at: 1-844-KEYS-USA
with any questions related to the remote functions of this key.
3
iKeyless Confidential
Operation details
Make sure you are within range of the vehicle before using the remote.
● Press Lock to lock all doors
● Press Unlock to unlock the driver’s door.
○ Press Unlock again within 5 secs to unlock all doors
● Press and Hold the Panic button to sound the vehicle’s Panic alarm
○ Press any button to stop the Panic alarm
● Double press Remote Start (if available) to start the car.
Note - The exact behavior in response to each button press may vary depending on the vehicle. Consult the vehicle
manual for more information.
4
iKeyless Confidential
Battery Replacement
If the battery needs to be replaced:
1. Pry the back of the remote apart.
2. Replace the battery with CR2032 cell with the “-” side facing down
into the plastic.
3. Press the two shell parts back together.
5
iKeyless Confidential
FCC Regulatory Statement
MODEL: FDHFL-G000
FCC ID: X32-FDHFG000
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications to this device not expressly approved by iKeyless LLC could void the user’s authority to operate
the equipment.
6
iKeyless Confidential
ISED Regulatory Statement
CAN ICES-3 (B)/NMB-3(B)
MODEL: FDHFL-G000
IC: 8797A-FDHFG000
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device.”
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes :
1) l’appareil ne doit pas produire de brouillage;
2) l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le
fonctionnement.
7