iLuv Creative Technology FITACTAIR Fit Active Air User Manual
iLuv Creative Technology Fit Active Air
User Manual
1, Power On
Press and Hold Multifunction button 1 Second , promotes " Power On" , LED lights up , unit
goes into Discovering mode, Blue LED switch to fast flashing ( 2times /s)
2, Pairing
Press and Hold Multifunction button 3 Seconds comes from Speaker then promotes " ready to pair
", unit goes into "Pairing" mode, Blue LED switch to Blue/Red flashing alternately ( 2times /s) .A
voice prompt when pairing success (pairing complete)
3, Connect to device
Touch and click Headset name in device blue tooth setting menu, Speaker then promotes " device
connected" , unit paired sucessfuly , Blue LED switch to slow flashing ( 4seconds /time)
4, Playing Music
1). If Music player app opened, after paired with speaker , Music start play directly
2). On paired mode, Open apps , Press multifunction button on headset to start play, Press again,
Pause playback.
3). Press and Hold“VOL+”button, skip to next song, Press and Hold“VOL-”button go back to last
song.
4). Press “VOL+/VOL-”button repeatedly to adjust volume ,Volume will go to maximum or
minimum ,and a voice prompt"minimum volume/maximum volume"
5, Incoming call, hand free
1). When incoming call received ,he phone ringing or voice prompt"incoming call " , LED
switch to fast flashing 2 times/second
2). When incoming call received , Press and Multifunction button to pick up ,Speaker then
promotes "call ended" Blue LED switch to slow flashing ( 1time /s), Press the same button again
to hang up.
3). During hand free conversation , During hand free conversation , Press and Hold
“VOL-”button to mute the sounds , Press and Hold “VOL-”button to cancel mute and go back
conversation
4). During hand free conversation Press “VOL+/VOL-”button repeatedly to adjust
volume ,Volume will go to maximum or minimum ,and a voice prompt"minimum
volume/maximum volume）
5). Double click multifunction button , Redial the last dialed number, voice prompt:（last number
redial）
6, Refused to call
When incoming call received, Press and Hold multifunction button 1 second Drip hint sound
comes from speaker and voice prompt"calling rejected"
7, Three-party conference(This function only applies to the current paired device and
Communication operators support )
In case conference is on, another call is incoming :
1).Double click multifunction button to hang up current call and pick up new incoming call;
2). Short press multifunction button to pick up new call also keep current conference
3). Short press multifunction button to Switch new and current conference call
8, Call conference transferring between mobile phone and bluetooth headset
On call conference, press and Hold multifunction button 1 second , switch between mobile
phone and blue tooth headset , "Di" tone prompt every time .
9, Voice Control
On Standby and playing music mode, Press and Hold Multifunction button 1Second , unit goes
into Voice control mode ,"Di" tone prompt
10, Power Off
Press and Hold Multifunction button 5 Second , Speaker promotes " Di " tone then say " Power
Off" , Red LED flashing 3 times then goes off
11, Low battery promotes
When battery level is below preset value ( 70% of rating ), Red LED start to flashing slowly
(one time in every 2 seconds), Speaker promotes " Di " tone then say " Battery low " in every one
minitue.
12, Battery Charging indication
During charging battery, Red LED keeps solid ON, and Blue LED lighs up once battery is full
charged .,
13, Auto reconnection
1).When Headset is disconnected with Bluetooth device in case they are out of effective range,
it will go into " Discovering " mode and Blue LED switch to fast flashing (2times /s), they will
reconnect automatically within 3 minutes when they go back to effective range , " Di " tone from
Speaker then promotes " Your headset connected" , once re-connected successfully .
2).When headset disconnected over 3 seconds, the blue LED switched to fast flashing(2times/s),
unit goes into standby mode, keep standby over 5 minutes, shutdown automatically with "Di"
tone pormotes then say
3).When Headset is Power on from Off mode , LED lights up and switch to fast flashing
(2times/s), it will search the device paired last time, If found the device and reconnected
successfully , LED will turn to slow flashing ( one time/4s), meanwhile , a short " Di " tone
comes from Speaker then promotes " device connected"
14, FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the
instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference
to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly approved by the
party
Responsible for compliance could void the user’s authority to operate this equipment. (Example-
use
only shielded interface cables when connecting to computer or peripheral devices).
This device complies with Part 15 of the FCC Rules. Operation issubject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used
in portable exposure condition without restriction.
Declaration of Conformity
Hereby, iLuv Creative Technology, declares that this device is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.