iMageTech IMAGEMCU4035 iMage MCU4 Wireless Speakerphone System User Manual

iMageTech Co.,Ltd iMage MCU4 Wireless Speakerphone System

User Manual

MCU 4S0 S1 S2 S3 S4MRESERVESLAVE1234 0+-GSOURCEOUTPUTINPUTINDIVIDUAL1 2 1 2PAIRCONSOLES0S1S2S3S41 2 3 4 5 6 128 117 9 10I/O Port & LEDPacking:iMageTech MCU4 Wireless Meeting Speakerphone SystemStartiMageTech MCU4 unit USB cable USB adapter Terminal port (16pin+12pin)VCS cable set(Differs according to VCS model)Step1 : Connect the USB adapter (No.12) to the iMageTech MCU 4 Wireless Meeting Speakerphone System.Step2 : Press the “Bluetooth Speakerphone pairing button (No.8)” on the back for 3 seconds, and wait until “the Bluetooth connection status indicator (blue)” rapidly flashes, then it can automatically be mapped to the iMage A1/A2 Bluetooth Conference Speakerphone. Simply pair five sets of iMage A1/A2 Bluetooth Conference Speakerphones to S0, S1, S2, S3 and S4 in order (make sure that the iMage A1/A2 Bluetooth Conference Speakerphone is set to “Adpter mode” before pairing).Step3 : Select audio source (Bluetooth, USB or video mode). You can select Bluetooth to connect mobile devices or USB devices to the computer, or connect a VCS using dedicated audio cables. If Bluetooth audio source is selected, please pair it using the Bluetooth audio source pairing button (No.10).1. Power indicator2. Audio source status indicator (Bluetooth/blue, USB/red, VCS/none)3. Bluetooth connection status indicator (Blue)4. System-reserved port5. Audio Out (independent audio output) 6. Audio In (connect to Audio Out of the VCS) 7. Audio Out (connect to the Audio In of the VCS) 8. Bluetooth Speakerphone pairing button (S0, S1, S2, S3, S4) 9. Console pairing button10. Bluetooth audio source pairing button11. Audio source selection switch (video, USB, Bluetooth)12. USB power
SourceThe iMageTech MCU4 Wireless Meeting Speakerphone System can quickly connect to the audio device you require through the “audio source selection switch (No.11)”; it provides three connection modes: Bluetooth, USB and VCS.＊Bluetooth mode: Press and hold the “Bluetooth audio source pairing button (No.10)” for 3 seconds to enter pairing mode to pair and use the device.＊USB mode: Simply connect the PC and the iMageTech MCU4 Wireless Meeting Speakerphone System with a USB cable.＊VCS mode: Please refer to the chapters “Connecting VCS” and “Wiring method”.SpecificationNotesStatementContact Us! Need more help? Please contact us nowLED Indicator Bluetooth connection status display＊This product must be used with iMage A1/A2 Bluetooth Conference Speakerphone and be set up by professional engineers before it can be used; please contact an engineer if you encounter any problems during use.＊When connecting with iMage A1/A2 Bluetooth Conference Speakerphone, the maximum distance allowed between the two is approximately 10 meters provided that there are no large objects (such as walls etc) or barriers in between them.＊iMageTech MCU4 Wireless Meeting Speakerphone System can be paired with a maximum of 5 iMage A1/A2 Bluetooth Conference Speakerphones. Please be careful to only pair one speakerphone at a time; when one speakerphone is successfully paired with the system, then proceed to pair the next one.＊If you are pairing your iMageTech MCU4 Wireless Meeting Speakerphone System and iMage A1/A2 Bluetooth Conference Speakerphone for the first time, it takes approximately 30~45 seconds to complete the pairing process; but if you have previously paired them before, pairing can be completed in approximately 10 seconds.This product complies with the provisions of the low-power radio wave radiation Administrative Regulations Article XII-XIV etc.＊Without permission granted by the DGT, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristic as well as performance to an approved low power radio-frequency devices.＊The low power radio-frequency devices shall not influence aircraft security and interfere legal communications; If found, the user shall cease operating immediately until no interference is achieved.＊The said legal communications means radio communications is operated in compliance with the Telecommunications Act.＊The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM radio wave radiated devices.1. Website Introduction: http://www.iMagetech.com.tw (provides the newest support information and online user manual)2. E-mail address: http://www.iMagetech.com.tw/contact.php3. Please call: 886-2-279677714. Address 5F., No.16, Ln.15, Sec. 6, Minquan E. Rd., Neihu Dist., Taipei City 114The current connection status can be determined by how the “Bluetooth connection status indicator (blue)” flash:＊Entering pairing mode: Flash rapidly ＊Pairing successful: Light remains constantly＊Flash once every 5 seconds: No devices to pair＊Note: The data listed above were acquired by laboratory testing; actual data may vary according to different usage scenarios.Model: iMageTech_MCU4_03Dimensions: 265mm X 127mm X 44.5mmWeight: 445±5gBluetooth Version: Bluetooth v3.0+EDR/AGHFP V1.6Operating Frequency: 2402MHz~2480MHzModule Type: Bluetooth Specification V3.0 Class 2 and Class 3Audio Input/Output Type: Bluetooth/Terminal/USBAudio Performance: Sample rate: 16K Crosstalk: 75dB SNR: 85dBAudio Mixer: 5 channel analog in/outAudio Input: MIC in/Line In Impedance: < 10 KΩ Maximum Level: 0 dBAudio Output: Impedance: > 600 Ω Maximum Level: 0 dBIndividual Audio Output: Impedance: > 600 Ω Maximum Level: 0 dBConfiguration & Admin Software: iMageTech Audio Parameter Editor....TBDControl Ports: Serial Command Protocol Only (Console software not supported on RS- 232 port) DB-9 female - Reserve 38,400 baud rate; 8 bits,1 stop bit, no parityUSB: Mini-USB Type B Antenna Type: Build-in AntennaPower: DC5v ±10%Operating Temperature: 0 ~ 60℃Optional Accessories: iMage A1/A2 Bluetooth Conference Speakerphone PSTN/SIP Moduel Dial Pad
iMageTech MCU4 Advanced settingsVCS wiring instructions (Cisco SX20, advision XT series)VCS cable set is already included in the iMageTech MCU4 Wireless Meeting Speakerphone System product package, allowing you to connect to several frequently used VCS mode (Cisco SX20, Radvision XT series) directly. The following are the wiring methods and the reference figure for the corresponding pins.Please note that the wiring of this product must be performed by a professional engineer in order to avoid misconnection resulting in function failure.RESERVESLAVE1234 0+GSOURCEOUTPUTINPUTINDIVIDUAL1 2 1 2PAIRCONSOLES0S1S2S3S4RESERVESLAVE1234 0+-GSOURCEOUTPUTINPUTINDIVIDUAL1 2 1 2PAIRCONSOLES0S1S2S3S4Connect Cisco to SX20 Audio OutConnect Cisco to SX20 Audio InCisco SX20 Radvision XT series(XT5000, XT4200)1. Cable required: 1. Cable required:3.5mm (4-pole) to stripped wire connector3.5mm (3-pole) to stripped wire connector3.5mm (3-pole) to stripped wire connector+RCA3.5mm (3-pole) to stripped wire connector+RCA2. Wiring instructions:Connect the “+ (positive)” and “G (ground)” of the stripped wire connector to the corresponding iMageTech MCU4 Wireless Meeting Speakerphone System terminal ports; insert the 3.5mm terminal directly into the Audio In/Out of Cisco SX20.2. Wiring instructions:Connect the “+ (positive)” and “G (ground)” of the stripped wire connector to the corresponding iMageTech MCU4 Wireless Meeting Speakerphone System terminal ports; insert the 3.5mm terminal directly into the Audio In/Out of Radvision XT series.Connect Radvision to XT series Audio OutConnect Radvision to XT series Audio In-
VCS Wiring (other models)If your VCS is another model, you can still use the following wiring method to connect and use with the iMageTech MCU4 Wireless Meeting Speakerphone System; the following is the reference figure for the corresponding wiring pins.Note! The output/input terminal audio values and standards of different VCS may differ; please first refer to the user manual of the VCS you want to connect to.RESERVESLAVE1234 0+GSOURCEOUTPUTINPUTINDIVIDUAL1 2 1 2PAIRCONSOLES0S1S2S3S4RESERVESLAVE1234 0+GSOURCEOUTPUTINPUTINDIVIDUAL1 2 1 2PAIRCONSOLES0S1S2S3S4RESERVESLAVE1234 0+-GSOURCEOUTPUTINPUTINDIVIDUAL1 2 1 2PAIRCONSOLES0S1S2S3S4RESERVESLAVE1234 0+-GSOURCEOUTPUTINPUTINDIVIDUAL1 2 1 2PAIRCONSOLES0S1S2S3S4Balanced connection+-GTerminal connectionWhen connecting, please note that the order from left to right is negative, positive and ground respectively.Connect to VCS Audio OutConnect to VCSAudio InConnect to VCSAudio OutConnect to VCSAudio InUnbalanced connectionIndependent audio output connection (balanced) (the reception of each iMage A1/A2 Bluetooth Conference Speakerphone can be output to external audio equipment independently)Independent audio output connection (unbalanced) (the reception of each iMage A1/A2 Bluetooth Conference Speakerphone can be output to external audio equipment independently)Connect to VCSAudio OutConnect to external audio equipment or VCSAudio InConnect to VCS Audio OutConnect to external audio equipment or VCS Audio IniMageTech MCU4 Advanced settings--

.

Navigation menu