iRobot R3MOD24A 2.4 GHz Module/4123659 User Manual CERTIFICATE OF COMPLIANCE

revised users manual

Rhein Tech Laboratories, Inc. Client: iRobot Corporation

360 Herndon Parkway Model: 2.4 GHz Module

Suite 1400 Standards: FCC 15.247 & RSS-210

FCC/IC ID: UFE-R3MOD24A/6652A-R3MOD24A Herndon, VA 20170

http://www.rheintech.com Report #: 2007155

Page 38 of 42

Appendix I: Manual

Please refer to the following page.

2.4 GHZ Module User Manual Compliance Language

As a condition of using this module, and in addition to the requirements above, the manufacturer further agree to

the following:

Changes or modifications not expressly approved by the party responsible for compliance could void

the user’s authority to operate the equipment.

Only the antenna with which an intentional radiator is authorized may be used with the intentional

radiator.

and to include the preceding statements in their installation manual where the consumer will observe them.

2.4 GHz Module Labeling Requirements

The 2.4 GHz Module is to be installed in a product without alteration to provide a wireless link. During

installation, do not remove the FCC ID information on the module. The product that makes use of this module

must display the following text on the product, and in the installation manual, where it will be visible and readable

by the consumer:

Contains FCC ID: UFE-R3MOD24A IC: 6652A-R3MOD24A

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received,

including interference that may cause undesired operation.