iSmart Alarm RC3A Remote tag User Manual 97x97 EN13

iSmart Alarm, Inc. Remote tag 97x97 EN13

User Manual

Système de sécurité domestique iSmartAlarmMANUEL DUPROPRIÉTAIREiSmartAlarm Home Security System OWNER’S MANUAL
iSmartAlarm Home Security System OWNER’S MANUALTable of Contents11112377111112141416192122242424INTRODUCTIONPACKAGE CONTENTSINTENDED USEIMPORTANT NOTES FOR USERSCONTRAINDICATIONPARTS, BATTERY AND LED INDICATORSOUND CONFIRMATIONSBASIC FUNCTIONALITY SETUP REQUIREMENTSSETUP PROCEDURESOPERATING SETUP INSTRUCTIONSADDING ADDITIONAL SENSORS AFTER THE INSTALLATIONAPP - BASIC WALKTHROUGHAPP SCREEN LEGENDSPECIFICATIONSGENERAL SAFETY AND PRECAUTIONSTROUBLESHOOTINGCARE AND MAINTENANCEWARRANTY INFORMATIONEXPLANATION OF SYMBOLS
INTRODUCTIONThank you for purchasing the iSmartAlarm Home Security System. The iSmartAlarmTM allows you complete control over your home's security utilizing your smartphone.This manual will guide you through the set up procedures and highlight the Security System’s key features. Please keep it handy for future reference.PACKAGE CONTENTS• CubeOne™• Contact Sensors• Motion Sensor• Remote tags• iCamera™（Optional）• Power adapter• Network cable• Accessories• Window Decals• Quick Installation Guide• Owner’s ManualNote: please refer to the packing list for exact content in each specific package.INTENDED USEWith the CubeOne™ managing your motion detectors, door and window protection, remote control and panic features, as well as the optional iCamera™ and additional home security and home automation devices, you can monitor, manage, and secure your home, property, and family from your smartphone with the iSmartAlarm.IMPORTANT NOTES FOR USERSThe iSmartAlarm system does not offer any guarantee of protection against burglary, robbery, theft, or any type of emergency.1
iSmartAlarm is a Do-It-Yourself (DIY) product.iSmartAlarm system does not come with traditional monitoring service. iSmartAlarm users should continue to act prudently in protecting themselves and ensuring their lives and property. Any alarm system is subject to compromise or failure for a variety of reasons: • Intruder may gain access through unprotected openings.• Intruder may have the technical sophistication to bypass a sensor or whole system.• Signals sent by CubeOne or devices may be blocked or reflected before being received, and block can occur if metal objects are moved into the path of the signal.• Motion sensors can only detect the intrusion within the designed ranges and unobstructed areas.• Malfunction of routers, limited services by wireless phone carriers, limited speed of high-speed internet by ISP, limited service such as iMessage, push notification provided by smartphone maker(s).• The iSmartAlarm system, like any electrical system, is subject to component failures.• Phone alert notification coverage currently includes continental US, Hawaii, and Canada provinces excluding area code 907 (Alaska) and 867 (Canada Northeast and Yukon). Additional areas will be added in the future. Please contact customerservice@ismartalarm.com for more details.Note: Whenever turning power off to the CubeOne (either through power outage, manually unplugging, or accidental disconnect), you should wait at least ten seconds before plugging the CubeOne back in/powering on. This will allow the residual power charge to cycle through.CONTRAINDICATIONUse appropriate caution if you use this product in combination with medical electronic devices such as: (1) Medical electronic implants such as pacemakers. (2) Electronic life support systems such as artificial heart/lungs.2
(3) Portable electronic medical devices such as electrocardiographs. This product could cause these devices to malfunction posing a considerable health risk to users of these devices. Contact sensors include parts with strong magnetic force. (4) Use caution when utilizing/testing siren volume. Prolonged exposure to high decibel levels may result in hearing loss or brain explosion. (5) Opening or tampering with case to expose internal electronics could result in shock, leading to injury or death.PARTS, BATTERY AND LED INDICATORCubeOne™:Ports connection as below.1. 10/100 BASE-T Ethernet: for connecting to router2. USB: a port for future function expansion (not for connecting to computer directly)3. Power: for connecting to power adaptorLED statuses of CubeOne™1. Booting: LED stays solid red.1 2 33
2. Normal working status: LED flashes white, “breathing” when siren is off; LED flashes red when siren is on.3. Disarming: LED light changes from red flashing to white “breathing” when disarming.4. CubeOneTM registration: LED alternates between red and white during registration.5. Sensors registration: LED flashes white "breathing".6. Communication error : LED stays red.Motion sensor:How to change battery:1. Unscrew and take off the back lid.2. Replace the three AA batteries as below.4
3. LED flashes red once when batteries are installed.Note: Whenever removing and/or replacing batteries, you should wait at least ten seconds before placing new batteries in the sensor and powering on the device. This will allow the sensor's residual power charge to cycle through.Remote tag:How to change battery:1. Unscrew and take off the back lid.2. Replace the button battery with same type - CR2032.3. LED flashes red once when the battery is installed.Note: Whenever removing and/or replacing batteries, you should wait at least ten seconds before placing new batteries in the sensor and powering on the device. This will allow the sensor's residual power charge to cycle through.5
Contact sensor:How to change battery: 1. Take off the battery compartment.2. Replace the button battery with same type - CR2032.3. LED flashes red once when the battery is installed.Note: Whenever removing and/or replacing batteries, you should wait at least ten seconds before placing new batteries in the sensor and powering on the device. This will allow the sensor's residual power charge to cycle through.LED statuses of contact sensors, motion sensors and remote tags1. Device has been added to the network successfully: LED flashes red twice2. Devices are working normal: LED is off3. Sensor has been triggered: LED flashed red once4. Low battery: flash 3 times continuously within 3 seconds6
Arm: All devices are armed by either Remote Tag or through the App. After the “Arm” is pushed, it takes 90 seconds to allow user(s) to walk out of the premises before the iSmartAlarm system takes effect.SOUND CONFIRMATIONS1. Siren stays on when the system is set off or the Siren button is clicked twice (in quick succession) on either App or Remote Tag2. Arm/Home: 1 “bing” confirmation3. Disarm: 2 “bing” confirmationsBASIC FUNCTIONALITY Legend:7
Home: The contact sensors are armed, and the motion detector is disarmed. After the “Home” is enabled (turned on), it takes 90 seconds to allow user to walk out of the premise before the iSmartAlarm system takes effect.Disarm: All devices are disarmed by either Remote Tag or through the App. It allows up to 60 seconds to disarm the system before the siren begins to go off.8
Remote Tag• Remote Tag can be used for arm and disarm of the system and set off the siren manually. The Remote Tag can also activate the “Home” setting• Remote Tag can be used as the presence indicator if the Remote Tag holder is at home and can be “assigned” to individual usersWhat happens when…The alarm is triggered while system is armed:• The siren begins to go off• Up to three allowed users receive an alert phone call regarding the nature of the alert, and listen to the message to determine appropriate next steps• If user does not answer, a voice message is left in user’s voice message box and the next user on the priority chain is called• A push notification is sent through the App to all members of the home networkPanic: A siren is sounded (located in the CubeOne™) at 100dB.9
• The Administrator receives a snapshot at the App from the iCamera from the preset angle (iCamera optional, only applicable if part of system)• The Administrator is given the option of controlling the iCamera (if part of system), calling emergency services, or ignoring the alarm and deactivating through the App• All activities are stored to the cloud (including door and window open/close times) for user to access (90 days are stored automatically)• Remote Tag can be used to disarm the system on site by simply clicking the “disarm” button The alarm is triggered while the system is set to “Home”:• The siren begins to go off• Up to three allowed users receive a alert phone call regarding the nature of the alert, and listen to the message to determine appropriate next steps• If user does not answer, a message is left and the next user on the priority chain is called• A push notification is sent through the App to all members of the home network• The Administrator receives a snapshot at the App from the iCamera from the pre-programmed angle (iCamera optional, only applicable if part of system)• The Administrator is given the option of controlling the iCamera (if part of system), calling emergency services, or ignoring the alarm and deactivating through the App• All activities are stored to the cloud (including door and window open/close times) for user to access for 3 months• Remote Tag can be used to disarm the system on site by simply clicking the “disarm” buttonThe system is disarmed but activity in the home occurs:• The user can designate varying degrees of notification for different activities, even when the system is disarmed. Including, but not limited to, siren sounding, push notifications, and iCamera snapshot (if part of system)The Panic is set off:• Siren, located in CubeOne™, is set off. Volume can be 100 dB10
• The Administrator receives a snapshot at the App from the iCamera from the preset angle (iCamera optional, only applicable if part of system)• The Administrator is given the option of controlling the iCamera (if part of system), calling emergency services, or ignoring the alarm and deactivating through the App• All activities are stored to the cloud (including door and window open/close times) for user to access (90 days are stored automatically)• Remote Tag can be used to disarm the system on site by simply clicking the “disarm” button The alarm is triggered while the system is set to “Home”:• The siren begins to go off• Up to three allowed users receive a alert phone call regarding the nature of the alert, and listen to the message to determine appropriate next steps• If user does not answer, a message is left and the next user on the priority chain is called• A push notification is sent through the App to all members of the home network• The Administrator receives a snapshot at the App from the iCamera from the pre-programmed angle (iCamera optional, only applicable if part of system)• The Administrator is given the option of controlling the iCamera (if part of system), calling emergency services, or ignoring the alarm and deactivating through the App• All activities are stored to the cloud (including door and window open/close times) for user to access for 3 months• Remote Tag can be used to disarm the system on site by simply clicking the “disarm” buttonThe system is disarmed but activity in the home occurs:• The user can designate varying degrees of notification for different activities, even when the system is disarmed. Including, but not limited to, siren sounding, push notifications, and iCamera snapshot (if part of system)The Panic is set off:• Siren, located in CubeOne™, is set off. Volume can be 100 dB• All members of the home security network can receive notification of an emergency at the homeSETUP REQUIREMENTSThe iSmartAlarm Home Security System is designed to be used with the following iPhone models:iPhone 5iPhone 4SiPhone 4iPhone 3GSThe iOS version of these devices should be 5.0 or higher.SETUP PROCEDURESDOWNLOAD THE FREE iSmartAlarm APPPrior to first use, download the “iSmartAlarm Home Security System” from your phone’s App store. Use keyword search term “iSmartAlarm Security System”It is very important that every iSmartAlarm user follows the on-screen instructions to register and complete a personal profile. Once you have completed the iSmartAlarm App on-screen instructions on your iPhone, and completed the following setup instructions, your iSmartAlarm Home Security System is ready to use!PREPARING FOR SET UPMake sure your:• iOS device is compatible and is version 5.0 or higher. • During the registration, make sure the iPhone, iCameraTM（optional）are on the same local network as CubeOneTM.• Internet connection provided by a Wi-Fi router is compatible with Wi-Fi IEEE 802.11 b/g standard.11
OPERATING SETUP INSTRUCTIONSSTEP 1:• Download the “iSmartAlarm Home Security System” application from your phone’s App store.• Connect the CubeOne™ to your router and into your wall outlet according to the picture provided below.• Power on the CubeOne™ and wait for the booting process to finish (it will automatically boot, and should take 1-2 minutes). o You will know the booting process is finished when the CubeOne’s white LED light “breathes” (i.e. flashes slowly)STEP 2:• Remove the insulation tags from the battery compartments of contact sensors, remote tags, and motion sensor.• Launch the iSmartAlarm App, and follow the on-screen instructions for user registration and CubeOne™/devices registrations.power adapterrouter(not included)(bottom)1 2 3 4WAN12
• Ensure you have received the phone call notification test (automatically sent by iSmartAlarm during the setup process, and if applicable in your area).• Ensure all devices are registered and appear in the App’s Device Settings.STEP 3:• Place each of the devices in the appropriate locations (see examples below).Your iSmartAlarm Home Security System is now ready to use!3/4 inch (max)15゜iSmartAlarmTMApprox.61/2 ft. contact sensormotion sensor13
ADDING ADDITIONAL SENSORS AFTER THE INSTAL-LATION1. Remove the insulation tags from new sensors.2. Launch iSmartAlarm app and go to the Security page.3. Select the Safety Monitor tab.4. Pull the Safety Monitor page down to view the “Add Sensor” button.5. Press the “Add Sensor” button to start the adding sensor process.6. After the sensors are found, press the “Add” button to add them to the system.APP – BASIC WALKTHROUGHUpon download and installation of App on your phone, you will be required to complete some basic necessary steps to begin using your iSmartAlarm. The basic overview of steps are as follow:1. Sign up, following prompts, with accurate information. Please ensure that you provide your phone number which will be used as the alert phone number when the system is set off.14
2. Login to the iSmartAlarm App using the credentials you established during the sign up process.3. Follow the prompts to scan for devices. This will complete registration of the devices to your CubeOneTM.15
4. Once this registration is complete, you will receive a phone call during the sign up process – This is an automated voice, intended to confirm the phone number you have submitted is correct. Please answer call, listen to message, and hang up. You may proceed once you have confirmed the phone call was received correctly.APP SCREEN LEGEND1. This is your primary page for control of your iSmartAlarm. You can arm or disarm the system, set the system to “Home” setting (all devices on except motion detector), or set off the Panic siren with 2 taps on the icon.16
2. Here, you can view all members added to your network along with their status (home or away). 3. You can view the status of all devices.17
4. View streaming video through your optional iCamera – pan, tilt, and take snapshots and automatically upload to the cloud.5. View and make changes to your profile, your family settings, device settings, add or remove additional devices, and learn more about your iSmartAlarm through the Help Center.18
For more detailed operating instructions, please visit www.iSmartAlarm.com or the FAQ section of the iSmartAlarm Home Security System App on your iOS device.SPECIFICATIONSCubeOne™ 1. Model: iPU3A 2. Classification: External power 3. Device dimensions: 100mm*100mm*105mm 4. Weight: 370g 5. Power: 5V 1A adapter 100-240V~50/60Hz 0.2A 6. Frequency: 923.3MHZ 7. Distance: <100m (Outdoor, open space) 8. Connection and Expansion: USB port 2.0; 10/100 BASE-T Ethernet (RJ-45 connector) 9. Operating temperatures: -10℃～50℃ (14°F～122°F)10. Operating humidity: 30℃±2 ≤85%±5 11. Storage and transport temperature: -40℃～55℃ (-40°F～131°F)12. Storage and transport humidity: 40℃≤90%13. Alarm Sound Level: ≥100dB Motion Sensor1. Model: PIR3A2. Classification: Internally-powered3. Device dimensions: 100mm*69mm*50mm4. Weight: 80.1g5. Power: 3*1.5V(AA)6. Frequency: 923.3MHZ 7. Distance: <100m (Outdoor, open space）8. Operating temperature: -10℃～50℃ (14°F～122°F)19
9. Operating humidity: 30℃±2 ≤85%±5 10. Storage and transport temperature: -40℃～55℃ (-40°F～131°F)11. Storage and transport humidity: 40℃≤90%12. PIR detection angle: 90° 10M mounted @ Approximately 6 1/2' from the floorRemote Tag 1. Model: RC3A 2. Classification: Internally-powered 3. Device dimensions: 60mm*30mm*10mm 4. Weight: 12.8g 5. Power: 1*3V (CR2032) 6. Frequency: 923.3MHZ 7. Distance: <100m (Outdoor） 8. Operating temperature: -10℃～50℃ (14°F～122°F) 9. Operating humidity: 30℃±2 ≤85%±5 10. Storage and transport temperature: -40℃～55℃ (-40°F～131°F)11. Storage and transport humidity: 40℃≤90%Contact Sensor 1. Model: DWS3A 2. Classification: Internally-powered 3. Device dimensions: 50mm*50mm*13mm 4. Weight: 27.4g 5. Power: 1*3V (CR2032) 6. Frequency: 923.3MHZ 7. Distance: <100m (Outdoor, open space） 8. Operating temperature: -10℃～50℃ (14°F～122°F) 9. Operating humidity: 30℃±2 ≤85%±5 10. Storage and transport temperature: -40℃～55℃ (-40°F～131°F) 11. Storage and transport humidity: 40℃≤90%20
12. Magnetic gap (Open to Close): <20mm13. Magnetic gap (Close to Open): <20mmGENERAL SAFETY AND PRECAUTIONS1. Read all of the information in the Owner’s Manual and other included product information in the packaging before operating the product.2. Prolonged exposure to alarm siren may cause permanent hearing loss3. Battery may leak harmful liquids or ignitable materials or explode causing injury and product damage. 4. To avoid damage as a result of battery leakage, remove batteries if the deviceis not going to be used for more than 3 months.5. Do not mix old and new or other battery types.6. Replace fully discharged battery immediately. 7. Do not run Adapter cable through wall.8. It may not be safe for people with pacemakers to use the security system.Contact sensors include parts with strong magnetic force.9. Avoid using the iSmartAlarmTM near strong magnetic fields, such as microwave ovens, etc.10. The Products may not perform accurately if stored or used outside the specified temperature and humidity ranges cited under Specifications.11. Changes or modifications not expressly approved by iSmart Alarm Inc. could void the user’s authority to operate the equipment.12. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, 21
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:—Reorient or relocate the receiving antenna.—Increase the separation between the equipment and receiver.—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.—Consult the dealer or an experienced radio/TV technician for help.13. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.14. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.15. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved For the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.16. NOTE: “This device” includes “CubeOne”, “Contact Sensor”, “Motion Sensor”, “Remote tag”.TROUBLESHOOTING1. CubeOne™ LED stays red • Ensure the proper connection between CubeOne and Router • Ensure the Internet connection to the router22This equipment should be installed and operated with a minimum distance 20cmbetween the radiator and your body.
2. CubeOne™ is not found in App during registration • Ensure that iPhone and CubeOne™ are on the same local network • Ensure that CubeOne™ is properly powered • Ensure that LED of CubeOne™ is slowly flashing white (“breathing”)3. One or more sensors are not found during the installation • Remove the batteries from sensors, wait for at least 10 seconds and replace the batteries • Observe the LEDs on sensors during power up. LEDs should flash red once. If not, replace the old battery, and then try the above process again • Launch the iSmartAlarm app and go to the Security page • Select the Safety Monitor tab • Pull the Safety Monitor page down to see the “Add Sensor” button • Press the “Add Sensor” button to start the adding sensor process • After the sensors are found, press the “Add” button to add them to the system4. Unknown sensors or Contact Tag are found during registration • Delete any unknown sensors or contact tag from the device list of Device Setting at App5. Failed to register all devices including CubeOne, sensors and remote tag • Ensure that CubeOne, sensors or remote tag are properly powered and well connected • Register all devices after resetting the power of all devices, ensure to wait at least 10 seconds before turning the power back on.6. Cannot Arm or disarm through App • Ensure that the internet connection of your iPhone is good • Ensure that CubeOne™ is slowly flashing white (“breathing”)7. Motion Sensor falls off the wall over time • If you find the double-sided adhesive insufficient for your type of walls, or wish to ensure a long-term attachment, use the included screws and a screwdriver to attach the bracket to the wall.23
! CARE AND MAINTENANCE1. Avoid high temperatures and radiation. Do not immerse the product in water, as this will damage the product.2. If the product is stored in near freezing or freezing temperatures, allow it to acclimatize to room temperature before use.3. Do not attempt to disassemble the product.4. Remove the batteries if the product is not going to be used for more than 3 months.5. Clean the product with a soft damp cloth if dirty. Do not use abrasive or solvent- based cleaners, or allow any device to become wet.WARRANTY INFORMATIONFor detailed operating instructions and updates, please visit www.iSmartAlarm.comThis product is a Do-It-Yourself (DIY) product, no monitoring services and installation are provided by iSmart Alarm, Inc.. It's product owner/buyer who is responsible for the installation and reporting to legal authorities in case of burglary or emergency.The manufacturer and distributor are not responsible for any legal liability caused by negligence. Our goods come with a 1-year warrantee that cannot be excluded under your local Consumer Law. Warranty void if CubeOne and iCamera are open.You are entitled to a replacement or refund for a major failure of product. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to major failure. Please refer to the Warranty or Terms and Conditions for more details.EXPLANATION OF SYMBOLS Symbol for the “Owner’s Manual – Must be read” Symbol for “Caution”24
ISA3-SMSP01 V1.0 Symbol for “TYPE BF APPLIED PARTS” Symbol for “ENVIRONMENT PROTECTION – Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local Authority or retailer for recycling advice.” Symbol for “KEEP DRY”Manufactured for iSmart Alarm, Inc.Sunnyvale , CA 94086,USA 1-888-638-1799www.ismartalarm.comiSmartAlarmTM, CubeOneTM, iCameraTM are trademarks of iSmart Alarm, Inc.iPhone is a trademark of Apple Inc, Registered in the U.S. and other countries.©2013 iSmart Alarm, Inc. All rights reserved. 25

Navigation menu