iWaylink PDT003 Portable Data Terminal User Manual QuickGuide 1 012011

Download:
Mirror Download [FCC.gov]
Document ID	1409129
Application ID	JzbrumR/mel6DmegfdjuKg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	408.84kB (5110548 bits)
Date Submitted	2011-01-25 00:00:00
Date Available	2011-01-25 00:00:00
Creation Date	2011-01-20 09:07:43
Producing Software	Corel PDF Engine Version 3.0.0.667
Document Lastmod	0000-00-00 00:00:00
Document Title	QuickGuide-1 轉曲012011.cdr
Document Creator	CorelDRAW
Document Author:	vicki

OVERVIEW Bilatethstlllll
Scanner
LED Indicator
Logo
Charger
LED Indicator
Up Key
esc Key
Blue FN Key
FZ Key
FI Key
Alpha-Numeric Keys
EKSP Key .
Handxtrap
Stylus
Scanner Window
Power Key
LCD Touch screen
Scan Key
Enter Key
Down Key
Orange FN Key
F3 Key
F4 Key
Alpha Key
DC Power/
USB Port
Battery Cover
Battery
Cover Latch
BEFORE GETTING STARTED
1 Open the package and check every accessory:
Stylus Standard Battery Pack
(I IOOmAH)
Hand Strap USBYCabIe
Handy Terminal Power Adapter (without power cord)
(DcAu'rloN:
The deylce will be powered on when you lnstall the battery pack.
Please complete touch screen callbratlon for the rlrsttlirie usage, then turn
the delrlce offto charge the battery for at least 4 hours
no not start uslhg the devrce until the battery ls charged For at least 4 hours
Always charge the battery at u ”or we (3th ~104‘F)envlronmenl
temperature
The charger lndlcator llght will turn green when battery charging is tlnisheo.
0 Dimenslons 135(L) x 50m) x 2504) mm
oWelght: 1709 includlng llonmAl-l battery pack
190g including ZDDDmAH battery pack
0 Operatlon Temperature 40—501 at Storage Temperature ezs—so'c
2 ,Install the battery pack
1) Detach and loose the handsslrap.
2) Remove the battery cover by presslng two release latches and pull out
the battery cover.
®CAuflour
0 Please rollowthe below procedures to lnstall the battery lntothls device
0 Please insertthe contact slde (with lour plns) orthe battery liistthen
gently push the battery into place
(see the below plcture Figure I a Flgure ll)
Flg 1
. Replace the battery cover
al‘terinslallallon ls complete
. Please ensure to lock two
latches manually untll you
hearthe latch “click" lnto
place
3 . Connect Power Adapter—to charge the Handy Termlnal
t)lnseit DC connector of Power adapter to DC-IN converter on use Vcable.
2)Connect USE cableto system unit.
3)Connect power cord to power adapter.
4)Irl52rl Power and (0 AC outlet.
1Ef‘ER‘“'
USING THE KEYPAD
The keypad comprlses 23 keys and t scan buttons.
1) Press ”ml to enable Alpha Mode, then icon “ a “ shows atTask bar
2) The ”m Key allowsthetoggle between the numeric and alpha mode
3) Press -' to enable Function mode, the "B‘ can Wlll shows at Task bar
4) Press ‘-“ to enable Functlon mode, the “la" icon will shows at Task bar
Alpha Bluc Orange
L d
P°”"°" egg" Dem“ Function Function Function
Esc
SCAN
[NT
Alpha - l
kap antral lrrn ; kryl atk
Up flrlgmt
<7
i) Erlght—
F; W
rl 0
F7 Fl 1
Vlute rs r l 2
Del 5 Clrl
abc re: Alt
d,e,r untk Tab
q h,l s
y,k,t —
m n o or
FALLS
t,u,v
wary,
EEBEEEEEEEEWBCDBEGEQ
Spa “Setting”
a “Control Panel".
1) Double click“Dlsplay"
icon, select “Backlight”
9399 then press
“Advance"button
s... ...-ei
4.Date/TimeSetting
1) To set date/time:When you first buythis device ”WWI;—
or when the device is initialized.
2) From Control panel application: Tap “Start"T)
“settlng”—> “Control Panel" and execute
“Date/Time". .
3) Adjust it to meet you demand and tap“0K" izoaoiw E
mam.
El drama tau‘iv l
at sea-ml germ-rigid
5 .Ca|ibrating Touch Screen
This calibration is already done by manufacturer
if you wantto calibrate the touch screen again,
please tap“Start" % “Setting" 4 "Control Panel"
—) “Stylus” —> “Calibration” or press “F4” key; And
then, hold the“$tv|us" -> "Calibration" oron the
centerof each targetas it moves around the screen. +
tawny pea m any raa anr
ar ire ma a be use
rarest .. he set me
imrfl 0- mm
(D cAurioni:
Be sure to use the supplied stylus or plastic—tipped
pens for touch screen display. Don't use pencil, pen
or any sharp objecton touch screen display.
USING THE APPLICATION
1 iExecute the“AppIication“
Tap an application icon on the desktop. or by
Control Panel , or to tap"start” " “Programs”
Select one of the applications.
2 .Close the "Application"
Tap the tab of"x" to close the application,
Close E ulton
52 H“ llnnlfl "29
room; My tanpuei v
startlsutton
3.Usingthe Software Input Panel
1) Tap the “stylus" icon on the task bar.
2) Tap the "keyboard" item.
3) When Software Input Panel appears, input
letters with the Stylus.
Keyboard
input Panel
4 Task Switch
Win CE can execute more than 2 applications
at the same time.
1) Press "Task switch" icon in the task bar 7 w
2) Select the task you want in the task menu. . a... Monomer
During the execution orapplications, when
you select the menu "Desktop", then it
hides, instead ofclosing, all the other
applications.
BARCODE READING
Task SWiicho—
(D CAUTION:
Remove the protective film on Scanner window before using devices
equipped with Scanner.
1 Execute barcode application
Tap“start” 4 “Setting" 4 ti-
“Controi Panel”and double i "ll y III i
click"EC scanner” Icon “Sistine acsmwfl acsarra
Note:
This device is provided with
a built-in utility "ac scanner"
for barcode reader testing,
i~ id?
plan intorraiim my" inforiiaiim
Qi'm-ais-wt-r-ifi‘ lifu- isn't-“nipi
2.Aim the scan window at the barcode
Note:
Remember to take off the coat which is on the scan window and does
influence the reading sensitivity
34Press the scan key
Note:
If the barcode scan failed. revise the reading angle or distance,
4,Aim the laser beam at the center of the barcode
5.Checkthe barcode reading result: failed orsuccessiul
you can verify the result orbarcode reading by beep sounds or the LED
indicator
6 Barcode Scanning Position
This device can read from 4CM to so CM distance
Note:
1) when thebarcode is small for lasers scan position to close the
barcode number, When the barcode is the larger for lasers scan to
location away from the barcode number
2) The reader can be detected by a red beam.
lllll-lllll-lllH-Hllilllll'lllilillii‘lllll‘lillliillllllllillll
7 incorrect Barcode scanning position
Scanning operations may fall If laser beam position as below.
Note:
This product scans using laser light. Never lookdirectly into the laser
light or shine the laser light into the eyes
USING PERIPHERALS
1.UsingMicro SD type Card
1) Remove the battery cover and take out the battery
2) Insert a correctly oriented Micro SD card.
3) Reinstall the battery
4) Replace and lock the battery cover
5) A “Storage Card" icon will appear under “My Device" folder on your
desktop.
2.USB Connection
1) Generally it' s used forsynchronized data transmission with a desktop.
2) use the use cable to connect with Pc and this device and preinstall
Microsoft ActiveSync program version 3 e or later on the PC site.
BATTERY PRODUCT SAFETY
0 Lithium-ion battery packs might get hot, explode, ignite and/or cause
serious Injury if exploded by abusive using.
Please follow the safety warnings listed as below:
. Do not place the battery pack in fire or heatthe battery
- Do not install the battery pack backwards so the polarity is reserved.
. Do notconnect the positive battery pack with negative battery pack to each
other with any metal obiect (like wire).
- Do notcarry or store battery packtogetherwlth metal obiects
. Do not piercethe battery pack with nails, strikethe battery pack with a
hammer, step on the battery pack or otherWise put it to strong impacts or
shocks
~ Do not solder directly onto the battery pack.
. Do not expose battery pack to liquid, or allow the battery contacts to get wet
. Do notdisassemble or modirythe battery pack. The battery pack
contains safety and protection devices, which, if damaged, may cause
the battery pack to generate heat, explode or ignite.
. Do notdischargethe battery pack using any device except forthe
specified device. when it is used in devices other than the specified devices,
the battery pack can be damaged or its life expectancy reduced
lfthe device causes any abnormal currentto flow, it may cause the
battery packto become hot, explode or ignite and cause serious miury.
. in the eventthe battery pack leaks and the fluid gets into one's eye, do not
rub the eye.
Rinse well With waterand immediately seek medical care.
if left untreated, the battery fluid could cause damage to the eye
(D CAUTION:
RISK OF EXPLOSIN IF BATI‘ERV Is REPLACED lav AN INCORRECT TvPE
DIsPosE OF USED BATTERIES ACCORDING To THE INSTRUCTIONS.
Mobile Computer Quick Guide
User and Product Safety
F© i E l
0 Do not stare into the laser beam directly or shine it into eyes.
A WARNING:
0 Never use strong pressure onto the screen or subject it to severe
impact, as the LcD panel could become cracked and possibility
cause personal injury. If the LCD panel iS broken, never touch the
liquid inside, for such contact would irritate the skin.
0 Although the Handy Terminal passed the test of IP54 standard for
water and dust resistance, avoid prolonged exposure to rain or
other concentrated moisture.
For these conditions exceed the IP54 Standard, and could result in
water or other contaminants entering into the Handy Terminal.
0 Use only the approved Ac Adapter With the Handy Terminal.
Use or an unapproved AC Adapter Could result in electrical
problems, or even cause a fire or electrical shock to the user.
0 Be sure that only authorized supplier are allowed to disassemble
and reassemble the device. If the device or parts have been
damaged due to any wrong handling, shall void the product and
parts warranty
0 Always make backup copies ofall important data. it is easy done
by using a cable or Single Cradle (sold by optional) to transfer
data to the computer
Manufacturer is not liable for any data loss caused by deletion or
corruption by using otlhis device, ordue to the drained baiiery
PIN 4657-53000101

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
XMP Toolkit                     : 3.1-701
Creation Date--Text             : 
Producer                        : Corel PDF Engine Version 3.0.0.667
Mod Date--Text                  : 
Format                          : application/pdf
Creator                         : vicki
Title                           : QuickGuide-1 轉曲012011.cdr
Creator Tool                    : CorelDRAW
Modify Date                     : 2011:01:24 11:37:40+08:00
Metadata Date                   : 2011:01:24 11:37:40+08:00
Document ID                     : uuid:05624410-db55-444b-ade3-f3bbe8c40026
Instance ID                     : uuid:1c5bd512-274e-466c-b006-0c56f4d928bd
Has XFA                         : No
Page Count                      : 2
Create Date                     : D:20110120090743
Author                          : vicki

EXIF Metadata provided by EXIF.tools