ifm electronic DTRHFIB RFID Reader User Manual
ifm electronic gmbh RFID Reader
User manual
Installation Instructions RF identification system Read/write head 80223010 / 00 09 / 2014 ANT430 ANT431 UK Contents 1 Preliminary note ...................................................................................................4 1.1 Symbols used ...............................................................................................4 2 Safety instructions ...............................................................................................4 2.1 General .........................................................................................................4 2.2 Radio equipment ..........................................................................................5 2.3 Interference of electronic and medical devices ............................................5 3 Functions and features ........................................................................................5 4 Functions .............................................................................................................5 4.1 Operating principle .......................................................................................5 4.2 Overview.......................................................................................................6 5 Installation............................................................................................................6 5.1 General installation instructions....................................................................6 5.2 Notes on ID tag mounting .............................................................................6 5.3 Avoiding interference ....................................................................................7 5.4 Mechanical design ........................................................................................7 5.5 Fixing ............................................................................................................7 5.6 Mounting distances.......................................................................................8 5.6.1 ANT430.................................................................................................8 5.6.2 ANT431.................................................................................................8 5.7 Positioning of the ID tags..............................................................................9 5.7.1 ANT430.................................................................................................9 5.7.2 ANT431.................................................................................................9 6 Electrical connection ..........................................................................................10 6.1 Wiring .........................................................................................................10 6.2 UL approval ................................................................................................10 7 Display elements ............................................................................................... 11 8 Operation ........................................................................................................... 11 9 Dimensions ........................................................................................................12 9.1 ANT430.......................................................................................................12 9.2 ANT431.......................................................................................................12 10 Technical data ..................................................................................................12 11 Maintenance, repair and disposal ....................................................................13 12 Approvals/standards ........................................................................................13 12.1 Radio approvals........................................................................................13 12.1.1 Overview...........................................................................................13 12.1.2 Europe ..............................................................................................13 12.1.3 USA ..................................................................................................13 12.1.4 Canada .............................................................................................13 12.1.5 Taiwan ..............................................................................................14 12.1.6 Australia ............................................................................................14 12.2 EC declaration of conformity ....................................................................14 UK 1 Preliminary note This document is part of the device and contains information about the correct handling of the product. This document is intended for specialists. These specialists are people who are qualified by their training and their experience to see risks and to avoid possible hazards that may be caused during operation or maintenance of the device. Read this document before use to familiarise yourself with operating conditions, installation and operation. Keep this document during the entire duration of use of the device. 1.1 Symbols used ► → Instructions Cross-reference Important note Non-compliance can result in malfunction or interference. Information Supplementary note 2 Safety instructions 2.1 General Observe the operating instructions. Non-observance of the instructions, operation which is not in accordance with use as prescribed below, wrong installation or incorrect handling can affect the safety of operators and machinery. The installation and connection must comply with the applicable national and international standards. Responsibility lies with the person installing the device. The device must only be installed, connected and put into operation by a qualified electrician as the safe function of the device and machinery is only guaranteed when installation is correctly carried out. Disconnect the unit externally before handling it. In case of malfunction of the device or uncertainties please contact the manufacturer. Tampering with the device can seriously affect the safety of operators and machinery. This is not permitted and leads to an exclusion of liability and warranty. 2.2 Radio equipment In general, radio equipment must not be used in the vicinity of petrol stations, fuel depots, chemical plants or blasting operations. ► Do not transport and store any flammable gases, liquids or explosive substances near the unit. 2.3 Interference of electronic and medical devices Operation can affect the function of electronic devices that are not correctly shielded. ► Disconnect the device in the vicinity of medical equipment. UK ► Contact the manufacturer of the corresponding device in case of any interference. 3 Functions and features In connection with the evaluation unit DTE10x the read/write head ANT430/ ANT431 enables non-contact reading and/or writing of the RFID transponders (ID tags) conforming to the system. The data is converted into digitally coded values and provided to the evaluation unit. 4 Functions 4.1 Operating principle The ID tags are operated passively, i.e. without battery. The energy required for operation is supplied by the read/write head. The physical principle of the energy transfer is based on inductive coupling. The integrated antenna coil in the read/write head generates a magnetic field which partly penetrates the antenna coil of the ID tag. A voltage is generated by induction that supplies the data carrier with energy. 4.2 Overview Art. no.: Function: Type designation: Operating frequency: Type: ANT430 Read/write head DTRHF IBRWIDUS03 13.56 MHz M30, flush mountable Art. no.: Function: Type designation: Operating frequency: Type: ANT431 Read/write head DTRHF INRWIDUS03 13.56 MHz M30, non-flush mountable 5 Installation 5.1 General installation instructions When mounting several read/write heads adhere to the minimum distances between the systems. Flush mounting of a read/write head in metal reduces the read/write distance. The immediate vicinity of powerful HF emission sources such as welding transformers or converters can affect operation of the read/write heads. Information on the available mounting accessories is available on our website at: www.ifm.com → Data sheet search → e.g. ANT430 → Accessories 5.2 Notes on ID tag mounting If the ID tags are mounted in/on metal, the read/write distance is reduced. For positioning the ID tags the read/write heads are marked with an antenna symbol on the active face. It designates the middle of the integrated antenna coil and has to correspond with the middle of the ID tag. The orientation of the read/write head antenna axis must correspond with the axis of the ID tag coil. The best way to position the available ID tags and on mounting in metal is available on our website: www.ifm.com → Data sheet search → e.g. ANT430 → More information (General information about mounting and operation) 5.3 Avoiding interference The device generates a modulated electrical field with a frequency of 13.56 MHz. To avoid interference of the data communication no other devices generating interference emission in this frequency band must be operated in the vicinity. Such UK devices are for example frequency converters and switched-mode power supplies. 5.4 Mechanical design 1: Sensing face 5.5 Fixing ► Fix the device using the supplied nuts (M30). flush (ANT430) non-flush (ANT431) 5.6 Mounting distances 5.6.1 ANT430 Operating mode For reading and writing Distance side (A) ≥ 50 mm Distance front (B) ≥ 100 mm Distance side (A) ≥ 120 mm Distance front (B) ≥ 160 mm 5.6.2 ANT431 Operating mode For reading and writing 5.7 Positioning of the ID tags 5.7.1 ANT430 UK ► Align the ID tag on the antenna central axis. ID tag Distance read/write head (D) metal plastics Type E80370 20 mm 20 mm E80371 25 mm 30 mm All indications apply to static read/write operations. 5.7.2 ANT431 ► Align the ID tag on the antenna central axis. ID tag Type Distance read/write head (D) metal plastics E80370 35 mm 35 mm E80371 45 mm 45 mm All indications apply to static read/write operations. 6 Electrical connection 6.1 Wiring ► Connect the device to the evaluation unit DTE10x using the M12 connection. Voltage is supplied via the evaluation unit. L+ DATA A selection of sockets is available on our website at: www.ifm.com → Data sheet search → e.g. ANT430 → Accessories Cables with the following characteristics are suitable for the connection: Length < 20 m Ohmic resistance (feed + return line) max. 3Ω Effective cable capacity max. 3 nF 6.2 UL approval For units with cULus approval and the scope of validity cULus: ► Supply the device from an isolating transformer having a secondary UL-listed fuse rated a) 5 A at voltages of 0...20 Vrms (0...28.3 Vp) b) 100/Vp at voltages of 20...30 Vrms (28.3...42.4 Vp) 10 7 Display elements ANT430 ANT431 LED LED UK LED green: operating voltage LED yellow: ID tag LED Green Yellow Green + yellow Status ON OFF FLASHING SLOWLY ON (permanently) ON (pulse) FLASHING QUICKLY OFF FLASHING ALTERNATELY Description Operating voltage OK Operating voltage missing Deactivated ID tag detected ID tag read/written successfully Error when reading/writing on ID tag No ID tag in the field or faulty ID tag in the field or invalid ID tag in the field error in communication or device fault 8 Operation The read/write head is configured via the connected evaluation unit DTE10x. You can find more information about the operation in the manual: www.ifm.com → Data sheet search → e.g. DTE100 → Operating instructions 11 9 Dimensions 9.1 ANT430 50 39 37 29 M12 x1 M30x1,5 1,5 36 9.2 ANT431 M12 x1 M30x1,5 50 39 37 15 18 10 Technical data The data sheets are available on our website at: www.ifm.com → Data sheet search → e.g. ANT430 12 36 11 Maintenance, repair and disposal ► Do not open the housing as the device does not contain any components which must be maintained by the user. The device must only be repaired by the manufacturer. ► Dispose of the device in accordance with the national environmental regulations. 12 Approvals/standards UK 12.1 Radio approvals 12.1.1 Overview The overview of the approval status of a unit is available on our website at: www.ifm.com → Data sheet search → e.g. ANT430 → More information 12.1.2 Europe Use in all EU countries 12.1.3 USA Notices FCC: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. this device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications made to this equipment not expressly approved by ifm electronic may void the FCC authorization to operate this equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. 13 12.1.4 Canada Notices IC: This device complies with Industry Canada license-exempt RSS standards. Operation is subject to the following two conditions: 1. the device may not cause interference, and 2. the user of the device must accept any interference received, including interference that may cause undesired operation. 12.1.5 Taiwan Administrative Regulations on Low Power Radio Wave Devices warning Article 12 Unless granted permission by NCC, no company, firm, or user shall alter the frequency, increase the transmitting power, or alter the original design characteristics or operating functions of an approved low-power radio-frequency device. Article 14 Low-power radio-frequency devices shall not affect aircraft security nor interfere with legal communications. If such interference occurs, the user shall immediately cease operating the device until improvement is made and the interference no longer exists. Legal communications refers to the wireless telecommunication operations that comply with the Telecommunications Act. Low-power radio-frequency devices must accept any interference received from legal communications and ISM radio wave devices. 12.1.6 Australia Use in Australia: 12.2 EC declaration of conformity You can find the EC declaration of conformity on our website at: www.ifm.com → Data sheet search → e.g. ANT430 → More information 14 UK 15
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Producer : Acrobat Distiller 9.0.0 (Windows) Modify Date : 2015:01:14 08:59:05+01:00 Create Date : 2015:01:14 08:59:05+01:00 Format : application/pdf Title : untitled Document ID : uuid:b0dee3a5-89c0-436c-a934-c39e7d667fc2 Instance ID : uuid:820591c4-d1f3-4c17-a83f-d2b55fcfd071 Page Count : 15EXIF Metadata provided by EXIF.tools