ip access IPA243B 16 user 3G Access Point operating in Bands 2 & 5 User Manual N3G INST 300 AP Install v292 1 0

Download:
Mirror Download [FCC.gov]
Document ID	1834819
Application ID	vHNU7WWltjFl3M35BELCvA==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	Yes
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	362.75kB (4534383 bits)
Date Submitted	2012-11-12 00:00:00
Date Available	2012-11-12 00:00:00
Creation Date	2012-09-18 10:07:36
Producing Software	Acrobat Distiller 10.0.0 (Windows)
Document Lastmod	2012-09-18 11:11:25
Document Title	N3G_INST_300_AP_Install_v292_1.0.book
Document Creator	FrameMaker 10.0
Document Author:	cfb

nano3G AP Installation Manual
N3G_INST_300
292_1.0
ip.access Ltd
Building 2020
Cambourne Business Park
Cambourne
Cambridgeshire CB23 6DW
United Kingdom
www.ipaccess.com
Notices
This document is provided to you by or on behalf of ip.access Ltd ("ip.access").
© ip.access Limited 2012.
The documentation and any software described herein and/or provided to you in conjunction with this
documentation contain proprietary and confidential information of ip.access and may only be used
subject to a license agreement containing restrictions on use and disclosure. They are also protected
by copyright, patent rights and other intellectual and industrial property laws. The information
contained in this document and any software described herein is subject to change without notice. If
you find any problems in the documentation and/or the software please report them to us in writing.
The document and/or the software are not warranted to be error-free. No right, title, license or interest
in any physically or electronically distributed materials is transferred to you by such distribution. No
part of this document and/or the software may be reproduced, displayed, copied, translated, adapted,
downloaded, electronically transmitted, used or reproduced in any form including (without limitation)
distribution or storage in a system for retrieval without our express written permission (which may be
subject to conditions).
The documentation and/or software may provide links to Web sites and access to content, products,
and services from third parties. ip.access is not responsible for the availability of, or any content
provided on, third-party Web sites. You bear all risks associated with the use of such content. If you
choose to purchase any products or services from a third party, the relationship is directly between
you and the third party. ip.access is not responsible for: (a) the quality of third-party products or
services; or (b) fulfilling any of the terms of the agreement with the third party, including delivery of
products or services and warranty obligations related to purchased products or services. ip.access is
not responsible for any loss or damage of any sort that you may incur from dealing with any third
party.
ip.access is the owner of the "ip.access" trademark and all associated trade names, logos and
devices unless indicated to the contrary. Any other trademarks, logos and names appearing on in this
document may be the property of their respective owners.
ip.access Limited is a Private Limited Company Registered in England and Wales
Company No. 03400157
Registered Office:
Building 2020
Cambourne Business Park
Cambourne
CB23 6DW
UK
Tel: +44 (0) 1954 713 700
Fax: +44 (0) 1954 713 799
Further company information may be found at www.ipaccess.com.
Revision History
Version Change Summary
Date
Author
292_0.1 Draft for N3G_2.92 and S16 information
22 Aug 2012
CFB
292_0.2 Updated with S16 information
14 Sep 2012
CFB
292_1.0 Released for N3G_2.92
18 Sep 2012
CFB
Table of Contents
Introduction............................................................................................ 1
1.1
Overview ............................................................................................................ 1
1.2
User Requirements ............................................................................................ 1
1.3
Related Information............................................................................................ 2
1.4
Licenses and Copyright Notices ........................................................................ 2
1.5
Terminology ....................................................................................................... 2
Installation Overview and Requirements ............................................ 3
2.1
Installation Tasks ............................................................................................... 3
2.1.1
2.1.2
2.1.3
2.2
2.2.1
2.2.2
2.2.3
2.2.4
2.2.5
2.2.6
2.2.7
2.2.8
2.2.9
2.2.10
2.2.11
2.3
2.3.1
2.3.2
2.3.3
2.3.4
2.4
2.4.1
2.4.2
2.4.3
2.4.4
2.5
2.5.1
2.5.2
2.5.3
2.5.4
2.5.5
Pre-Provisioning ................................................................................................... 3
Commissioning..................................................................................................... 3
On Site Installation ............................................................................................... 4
Requirements for All nano3G APs ..................................................................... 5
General Requirements ......................................................................................... 5
nano3G AP Cooling.............................................................................................. 7
Information Required for Pre-Provisioning ........................................................... 7
Parameters for Enterprise Deployments .............................................................. 8
Parameters for Residential Deployments........................................................... 10
Access Control ................................................................................................... 13
Closed Access with CSG Parameter Broadcast ................................................ 15
Closed Access in Legacy Mode ......................................................................... 16
Pre-Prepared Configurations - Optional ............................................................. 17
Information Required for Commissioning ........................................................... 18
Other Items for Commissioning.......................................................................... 19
nano3G S8 AP Site Requirements .................................................................. 20
nano3G S8 AP Power Requirements................................................................. 20
nano3G S8 AP Physical Requirements.............................................................. 22
nano3G S8 AP IP Bandwidth Requirements...................................................... 23
nano3G S8 AP Sundry Installation Equipment................................................... 23
nano3G S16 AP Site Requirements ................................................................ 24
nano3G S8 AP Power Requirements................................................................. 24
nano3G S16 AP Physical Requirements............................................................ 26
nano3G S16 AP IP Bandwidth Requirements.................................................... 27
nano3G S16 AP Sundry Installation Equipment................................................. 27
nano3G E8 AP and nano3G E16 AP Site Requirements ................................ 28
nano3G E8 AP and E16 AP Power Requirements............................................. 28
nano3G E8 AP and E16 AP Physical Requirements ......................................... 29
nano3G E8 AP IP Bandwidth Requirements...................................................... 30
nano3G E16 AP IP Bandwidth Requirements.................................................... 30
nano3G E8 AP and E16 AP Installation Tool Requirements.............................. 30
Pre-Provisioning a nano3G AP........................................................... 31
3.1
Pre-Provisioning Parameters ........................................................................... 31
3.2
Create a Site for a New AP.............................................................................. 31
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Page i
3.2.1
3.2.2
3.2.3
3.2.4
3.2.5
3.2.6
3.2.7
3.2.8
3.3
3.3.1
3.3.2
Start the Create Site Wizard............................................................................... 31
Optional - Use an Existing AP Configuration...................................................... 32
Optional - File Selection ..................................................................................... 33
Optional - Select an AP Template ...................................................................... 35
Enter AP Identification Details............................................................................ 35
Select AP Location ............................................................................................. 36
Select NTP Servers............................................................................................ 37
Modify NAS and Network Listen Settings........................................................... 37
Apply an Attribute Configuration to the AP ...................................................... 42
Load a Configuration File for the AP .................................................................. 42
Apply an AP Template to the AP........................................................................ 43
Configuration File Preparation ........................................................... 45
4.1
Overview of Configuration Files ....................................................................... 45
4.2
Create a Configuration File for nano3G APs ................................................... 46
4.2.1
4.2.2
Save Attributes to File for One AP ..................................................................... 46
Save Attributes to File for Multiple APs .............................................................. 47
Commission a nano3G AP.................................................................. 49
5.1
Configure a Commissioning Terminal to Connect to the AP............................ 49
5.2
Start Up the AP ................................................................................................ 50
5.2.1
5.2.2
Start up a nano3G S8 AP................................................................................... 50
Start up a nano3G E8 AP or E16 AP ................................................................. 50
5.3
Access the Commissioning Web Page for the AP ........................................... 51
5.4
Download Activities.......................................................................................... 53
5.4.1
5.4.2
5.5
5.5.1
5.5.2
5.5.3
5.6
5.6.1
5.6.2
Optional - Software Download............................................................................ 53
ATAS Check and Download............................................................................... 54
Configure the Connection to the NOS Server.................................................. 56
Static IP Configuration........................................................................................ 56
Configure the NOS Server Connection .............................................................. 57
Complete the AP Commissioning....................................................................... 57
Commissioning Finished.................................................................................. 59
Finished On Site Commissioning ....................................................................... 59
Finished Advance Commissioning ..................................................................... 59
nano3G AP Hardware Installation ...................................................... 60
6.1
Warnings and Regulatory Information ............................................................. 60
6.2
nano3G S8 AP Hardware Installation .............................................................. 61
6.2.1
6.2.2
6.2.3
6.2.4
6.3
6.3.1
6.3.2
6.3.3
6.3.4
Unpack the nano3G S8 AP ................................................................................ 61
Commission the nano3G S8 AP......................................................................... 62
Cable Connections ............................................................................................. 62
Mount the nano3G S8 AP .................................................................................. 63
nano3G S16 AP Hardware Installation ............................................................ 67
Unpack the nano3G S16 AP .............................................................................. 67
Commission the nano3G S16 AP....................................................................... 68
Cable Connections ............................................................................................. 68
Mount the nano3G S16 AP ................................................................................ 69
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Page ii
6.4
6.4.1
6.4.2
6.4.3
6.4.4
6.4.5
6.4.6
nano3G E8 AP and E16 AP Hardware Installation .......................................... 73
Unpack the nano3G E8 AP or E16 AP............................................................... 73
Removable Cable and Antenna Covers ............................................................. 73
Antennas ............................................................................................................ 74
Commission the AP............................................................................................ 75
Cable Connections ............................................................................................. 75
Mount the nano3G E8 AP or E16 AP on a Wall ................................................. 77
Finalize Installation.............................................................................. 81
7.1
Check and Upgrade the nano3G AP Software Image ..................................... 81
7.1.1
7.1.2
7.2
7.2.1
7.2.2
7.2.3
Check the Current Software Image Version....................................................... 81
Download the Latest Software Image from the NOS Server to the AP .............. 82
Finalize Configuration ...................................................................................... 83
Final Attribute Changes and Checks.................................................................. 83
Automatic Stored Configurations........................................................................ 83
Network Listen and Frequency Correction ......................................................... 85
7.3
Bring the AP into Service ................................................................................. 85
7.4
Disable Web Interface from NOS..................................................................... 86
Troubleshooting .................................................................................. 87
8.1
LED Status Indicators ...................................................................................... 87
8.1.1
8.1.2
8.1.3
nano3G E8 AP and nano3G E16 AP LEDs........................................................ 87
nano3G S8 AP LEDs.......................................................................................... 88
nano3G S16 AP LEDs........................................................................................ 89
8.2
nano3G E8 AP or E16 AP Does Not Start Up ................................................. 89
8.3
Factory Reset................................................................................................... 90
8.3.1
8.3.2
8.3.3
8.4
8.4.1
8.4.2
nano3G S8 AP Factory Reset ............................................................................ 90
nano3G S16 AP Factory Reset .......................................................................... 91
nano3G E8 AP and nano3G E16 AP Factory Reset .......................................... 92
Options for a Low Bandwidth Connection........................................................ 93
N User Configuration.......................................................................................... 93
Dynamic Backhaul Management (DBM) ............................................................ 94
nano3G AP and PSU Regulatory Information ................................... 95
9.1
Warnings and Cautions.................................................................................... 95
9.2
Regulatory Statements for nano3G S8 AP ...................................................... 97
9.2.1
9.2.2
9.2.3
9.3
9.3.1
9.3.2
9.3.3
9.3.4
9.4
9.4.1
9.4.2
US FCC Compliance .......................................................................................... 97
EU Regulatory Compliance ................................................................................ 97
Safety Standards................................................................................................ 98
Regulatory Statements for nano3G E8 AP ...................................................... 99
US FCC Compliance .......................................................................................... 99
EU Regulatory Compliance ................................................................................ 99
Safety Standards................................................................................................ 99
Environmental Standards ................................................................................. 100
Regulatory Statements for nano3G S16 AP .................................................. 101
US FCC Compliance ........................................................................................ 101
EU Regulatory Compliance .............................................................................. 102
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Page iii
9.4.3
9.5
9.5.1
9.5.2
9.5.3
9.5.4
Safety Standards.............................................................................................. 102
Regulatory Statements for nano3G E16 AP .................................................. 103
US FCC Compliance ........................................................................................ 103
EU Regulatory Compliance .............................................................................. 103
Safety Standards.............................................................................................. 104
Environmental Standards ................................................................................. 104
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Page iv
1
Introduction
The ip.access nano3G AP is an indoor Access Point for enterprise applications.
This manual provides all the necessary information required to install an ip.access nano3G
AP. The manual provides step-by-step instructions for hardware installation and
configuration steps required to bring a nano3G AP into service.
The AP can be configured with a static IP address or it can obtain an IP address
dynamically via DHCP. The AP-NOS Server and AP-AC connections can be configured to
be secure (via IPSec and a security gateway) or unsecured.
1.1
Overview
This manual is organised as follows:
• This introduction
• An overview of AP installation, including installation requirements for all AP
variants and specific requirements for each AP model
• AP pre-provisioning in the NOS Server using the NOS Client
• AP configuration file preparation - this is supplementary information for
pre-provisioning
• Commissioning an AP for connection to its serving NOS Server
• AP hardware installation
• Optional activities to finalize installation
• Installation troubleshooting
• Regulatory warnings and safety information
1.2
User Requirements
It is assumed that any readers that will use the NOS Client already know how to:
• Start the NOS Client
• Navigate the Explorer Pane to find an AP object
It is also assumed that the any readers that will use the NOS Client will have suitable user
privileges for the NOS Client.
Refer to [OPM_415] for information on using the NOS Client.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Introduction
Page 1
1.3
1.4
Related Information
[INST_440]
nano3G NOS Server Installation Manual (N3G_INST_430)
[OPM_300]
nano3G AP Operations Manual (N3G_OPM_300)
[OPM_415]
NOS Client Operations Manual (N3G_OPM_415)
[OPM_440]
NOS Server Operations Manual (N3G_OPM_440)
[REF_105]
nano3G System Glossary (N3G_REF_105)
[REF_110]
nano3G System Configuration Management (CM) MIB Reference Manual
(N3G_REF_110)
[REF_300]
nano3G AP License and Copyright Reference (N3G_REF_300)
[TRB_300]
nano3G AP Troubleshooting Manual (N3G_TRB_300)
[21.905]
Vocabulary for 3GPP Specifications (3GPP 3G TR 21.905)
Licenses and Copyright Notices
Portions of the AP are constructed from third-party software and open source code and
ip.access ltd gratefully acknowledges the contributions that these libraries, technologies
and components have made to the product. Each of these is supplied under the terms of a
license agreement and these are either reproduced or referenced in [REF_300], in line with
the stipulations of their authors.
1.5
Terminology
Common nano3G System terminology is defined in [REF_105].
For additional 3G terminology, see [21.905].
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Introduction
Page 2
2
Installation Overview and Requirements
2.1
Installation Tasks
There are three tasks that must be completed to install a nano3G AP and make it ready to
provide service:
• Pre-Provisioning
• Commissioning
• Site installation
These tasks can be completed in any order. In most cases, however, the most practical
approach is to provision and commission an AP before final site installation.
2.1.1
Pre-Provisioning
Pre-provisioning means to provide configuration details for a nano3G AP prior to site
installation. As an AP’s configuration is stored on its serving NOS Server, an AP can be
pre-provisioned at any time. This offers maximum flexibility for pre-provisioning an AP as far
or as little ahead of site installation as is needed. Pre-provision a nano3G AP with the
information it needs to allow it to provide service, such as a serving AC address, neighbour
lists, operating frequency and network identity details.
It is recommended to perform at least some pre-provisioning for an AP before on site
installation. As a minimum, use the Create Site Wizard in the NOS Client to create a site
and AP object on the serving NOS Server that will contain the AP’s configuration. If an AP
attempts to connect to its serving NOS Server, but the NOS Server has not yet been
provisioned with site details for the AP, the NOS Server will raise alarms about attempts to
connect by an unknown AP.
For more information about AP pre-provisioning, see 3 Pre-Provisioning a nano3G AP.
2.1.2
Commissioning
Use the nano3G AP’s built-in configuration web page to configure the AP with the settings it
needs to establish a connection with its serving NOS Server.
This is done using a commissioning terminal, either before sending the AP out for
installation or on site using a suitably prepared laptop.
Pre-Commissioning
This is recommended for residential deployment. The benefits of commissioning an AP
before on site installation are:
• The site installation engineer does not need a commissioning laptop.
• This also means that the site installation engineer does not need to know the user
name and password for the AP commissioning web page.
• If the AP has been properly pre-provisioned, the AP is effectively plug-and-play.
• This also means that a nano3G S8 AP or nano3G S16 AP could be installed by an
end customer, without help from a site installation engineer. The customer simply
needs to provide suitable network and power connections.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Installation Overview and Requirements
Page 3
Note:
For residential deployments, commissioning should have already been done at the factory
or by the supplier. If in doubt, contact the supplier for confirmation.
On-Site Commissioning
The benefits of using a laptop for commissioning an AP on site are:
• If there is a commissioning error, this can be corrected immediately without
needing to return the AP
• If an AP has been in storage for some time, the required software build and/or
ATAS package can be installed on the AP on site, without needing to return the AP
to base
2.1.3
On Site Installation
Physical installation of a nano3G AP at its operating site, including providing the AP with
power and a suitable network connection that provides a backhaul path to the NOS Server
and AC.
If a nano3G AP has been enabled for service prior to the site visit, the installation engineer
can make test calls immediately.
Note:
For some deployment scenarios, APs may be setup by end users. Generally, this may be
the case for plug and play residential deployments, where the end user has some easy to
follow setup instructions.
Note:
Due to the physical installation requirements of a nano3G E8 AP or E16 AP, which must be
securely wall mounted in a location with adequate ventilation, it is recommended that an E8
AP or E16 AP is installed by a suitably qualified site installation engineer.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Installation Overview and Requirements
Page 4
2.2
Requirements for All nano3G APs
This applies to all nano3G APs.
2.2.1
General Requirements
Requirements for Commissioning
• A commissioning terminal, which can be either a desktop computer or a laptop,
with:
• OS: Windows XP or later
• Web browser: Microsoft Internet Explorer 7 or later
• JavaScript enabled in the web browser
• A short Ethernet cable for connecting the commissioning terminal to the AP
• A temporary means to provide power to the AP while it is connected to the
commissioning terminal
Site Installation Requirements
All nano3G AP models have the following general requirements for installation:
• A permanent means to provide power to the AP once it is connected to the
backhaul
• An Ethernet connection to the backhaul via CAT5 Ethernet cabling
• Access to a DNS service on the backhaul to resolve symbolic addresses
• Access to NTP services on the backhaul to set the correct time and date each time
the AP starts up
• Access to a DHCP service on the backhaul to allow dynamic IP address
configuration
• If IPsec will be used to secure the interface across the backhaul, access to the
relevant Security Gateway that terminates the IPsec tunnel
• If a firewall is in place on the network an AP will use for backhaul, this must be
configured to allow traffic to and from the AP - see the port usage section below
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Installation Overview and Requirements
Page 5
Port Usage
All connections are outgoing. That is, they are initiated from the AP. Port usage has some
dependency on whether or not the AP is using IPsec.
With IPSec, the standard two ports are used:
Protocol
Destination Port
Use
udp
500
IPSec initial connection
udp
4500
IPSec operations
Without IPSec, the following ports are used:
Protocol
Destination Port
Use
sctp
29169
SCTP connection
udp
1024 to 1086
CS RTP to AC
udp
1025 to 1087
CS RTCP to AC
udp
1088 to 1150
CS Mux to AC
udp
2152
PS GTP to AC
These ports are used and allowed through the firewall where IPsec is used:
Protocol
Destination Port
Use
tcp
80
PM upload, software download, CRL download
tcp
443
PM upload, software download, CRL download
udp
53
DNS
udp
123
NTP
The following ports are allowed through the firewall independently of IPsec configuration.
For example:
AP > Firewall > DHCP Server
Protocol
Destination Port
Use
udp
67
DHCP - not needed for static IP configuration
udp
68
DHCP - not needed for static IP configuration
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Installation Overview and Requirements
Page 6
2.2.2
nano3G AP Cooling
Special attention must be given to ensure a nano3G AP will meet its air cooling
requirements in its installed location.
Take the following points into consideration for the physical location of an AP:
• All AP models must be installed so that they are upright, to ensure proper air will
flow through the body of the AP to provide cooling.
• All AP models must not be installed in enclosed spaces where air flow is
restricted. This includes, but is not necessarily limited to:
• Roof or ceiling spaces
• Small cabinets
• Tightly enclosed shelf spaces
• When free-standing the nano3G S8 AP, the stand supplied for this purpose must
be used, and the AP must be upright, as noted above.
2.2.3
Information Required for Pre-Provisioning
This information will be used to configure an AP from the NOS Client. The parameters
depend on the deployment scenarios:
• Parameters for Enterprise Deployments
• Parameters for Residential Deployments
Note:
It is recommended to pre-provision an AP before taking it on site, so that the AP can
download its configuration when it starts up on site.
OMC-R Client Login Details
User name and password for the NOS Client. To be able to configure an AP from the NOS
Client, the user name must have Full Access to the NOS Server serving the AP and Full
Access granted to its APs. See [OPM_415] for full details about user permissions.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Installation Overview and Requirements
Page 7
2.2.4
Parameters for Enterprise Deployments
Minimum Configuration - Enterprise Deployments
The minimum set of configuration data for the AP is:
Parameter
Notes
HNB C-Id (hnbCId)
This is the unique ID of this AP on the serving nano3G AC. The
term HNB is used in 3GPP in reference to small cells. The HNB
C-Id is used in the Register Request message to uniquely identify
the AP within the AC. The value is also combined with the RNC-ID
to give the 28 bit UC-Id (also known as TR-196 CellID) that is used
on-air in SIB3.
Use the same value in the dummy cell.
RNC ID (mcIdentity)
RNC ID of the AC - this is selected by choosing the BSMIS object
for the AP’s site.
AC address (acAddressinUse) IP Address or FQDN of the serving AC.
MCC (mcc)
Mobile Country Code.
MNC (mnc)
Mobile Network Code.
LAC (lac)
Location Area Code.
RAC (lac)
Routing Area Code.
SAI SAC (sac)
This is the SAI SAC (Service Access Code) which can be used by
the billing system. If this is not used by the billing system, it is
recommended to set this to 1.
SAI LAC (saiLac)
SAI Location Area Code which can be used by the billing system.
This is a different value than the LAC set in the
lacRacCandidateList for an individual AP. If this is not used by the
billing system, it is recommended to set this to 1.
UARFCN within
(rfParamsCandidateList)
The frequency on which the AP will operate. This should be
determined by network planning.
Scrambling code
The scrambling code assigned to the AP. This should be
within (rfParamsCandidateList) determined by network planning.
RSSI scan bands
(rssiScanBands_002)
Specify which bands to scan with Network Listen, when
performing RSSI detect and BCCH decode tests. Leave this empty
to scan all bands supported by the AP hardware.
Lat, Long and LCS uncertainty Latitude and longitude of the APs installation site, for RANAP
(lcsLatitude), (lcsLongitude),
location reporting
(lcsUncertainty)
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Installation Overview and Requirements
Page 8
Other Attributes - Enterprise Deployments
The following table shows some other attributes to consider for initial AP configuration.
Apart from the static neighbour lists, which are usually configured individually, any of these
can be in a general template for all APs or can be set individually.
Parameter
Notes
Cell Parameter Selection
Method
(cellParameterSelectionMethod
Determines whether values for cell parameters such as UARFCN,
LAC, RAC, and CPICH TX Power are selected by Network Listen
(NWL) or are configured via the management system.
The default is configuration by the management system. In this
case, cell parameters should be determined through planning,
preferably informed by on site measurements. This is particularly
appropriate for the enterprise APs, nano3G E8 APs and nano3G
E16 APs and for nano3G S8 APs used in enterprise or SOHO
environments.
Neighbour List Population
(neighbourListPopulation)
This determines how the live neighbour list is populated. For
enterprise and SOHO deployments, the recommended setting is
STATIC_ONLY, which only uses neighbours entered in the static
neighbour lists, as determined by network planning.
Static neighbour lists, GSM and
UMTS
(staticGsmNeighbourList),
(staticUMTSNeighbourList_001
These are complex attribute that specify GSM (2G) and UMTS
(3G) neighbour candidates. It is recommended to enter these
directly in the NOS Client. However, if a similar list has already
been configured for a nearby AP, it may be advantageous to copy
this attribute from a configuration file saved from the nearby AP,
load this into the target AP and then make suitable adjustments
from the NOS Client.
See [OPM_300] for static neighbour list configuration
Note: In the static neighbour list, the list must be ordered by best
first to ensure optimal reselection and handover.
Neighbour PLMNs
(neighbourPlmns)
If specified, this restricts the networks that neighbouring cells can
belong to for populating the neighbour lists by specifying the
MCC/MNC values.
PLMNs To Sync With
(plmnsToSyncWith)
If specified, this restricts the networks that nearby cells can belong
to for frequency synchronisation by specifying the MCC/MNC
values.
PM Reporting URL
(reportingUrl)
For reporting performance measurements to the PMS on the NOS.
Diagnostic Reporting URL
(diagnosticReportingUrl)
Set the URL of the NOS Server diagnostics service. Replace
oam.server with the IP address or FQDN of the server.
reportingUrl (reportingUrl)
Set the URL of the NOS Server measurement reporting service.
Replace oam.server with the IP address or FQDN of the server.
localTimeZone
(localTimeZone)
Set the timezone, in POSIX format, where the APs are located.
This assumes that all APs on the same AC are in the same
timezone, which is the most probable scenario. If APs are spread
across several timezones, this can be an AP-specific setting.
psHandoverEnabled
(psHandoverEnabled)
Whether or not PS RABs will handover between an AP and the
macro network. This is disabled (false) by default.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Installation Overview and Requirements
Page 9
Parameter
Notes
The number of days an AP can go without resynchronisation
Oscillator Synchronisation
before it raises the relevant alarm.
Timeout
(oscillatorSynchronisationTime
out)
2.2.5
Closed Access vs Open
Access
See section 2.2.6.
IuUP Initialisation
(iuUpInitNoDataSupported)
If this attribute is set to TRUE (default value), the AP includes
NO_DATA RFCs as appropriate in IuUP Initialisation frames.If this
attribute is set to FALSE, the HNB omits any NO_DATA RFCs that
would otherwise have been included.
Network Listen Scan Interval
(applyFrequencyCorrection)
Set the interval for frequency corrections.
Default is 28 days.
For enterprise deployments use the OCXO option, this can be
increased to any value.
Realm Id (realmId)
Allows a nano3G AP to include a configurable realm in the HNBAP
Register Request message. This is only used by Iuh APs.
Parameters for Residential Deployments
Minimum Configuration - Residential Deployments
The minimum set of configuration data for the AP is:
Parameter
Notes
HNB C-Id (hnbCId)
This is the unique ID of this AP on the serving nano3G AC. The
term HNB is used in 3GPP in reference to small cells. The HNB
C-Id is used in the Register Request message to uniquely identify
the AP within the AC. The value is also combined with the RNC-ID
to give the 28 bit UC-Id (also known as TR-196 CellID) that is used
on-air in SIB3.
Use the same value in the dummy cell.
RNC ID (mcIdentity)
RNC ID of the AC - this is selected by choosing the BSMIS object
for the AP’s site.
AC address (acAddressinUse) IP Address or FQDN of the serving AC.
MCC (mcc)
Mobile Country Code.
MNC (mnc)
Mobile Network Code.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Installation Overview and Requirements
Page 10
Parameter
Notes
Cell Parameter Selection
Method
(cellParameterSelectionMethod
Determines whether values for cell parameters such as UARFCN,
LAC, RAC, and CPICH TX Power are selected by Network Listen
(NWL) or are configured via the management system.
The default is configuration by the management system. In this
case, cell parameters should be determined through planning,
preferably informed by on site measurements. This is particularly
appropriate for the enterprise APs, nano3G E8 APs and nano3G
E16 APs and for nano3G S8 APs used in enterprise environments.
Configuration by NWL can be selected for APs that are deployed
for plug-and-play installation by end users - typically only nano3G
S8 APs. In this case, the AP configuration must include extended
LAC/RAC and RF Parameter Candidate Lists. This is so that the
AP can choose the best settings from the candidate lists according
to its RF environment.
LAC (lac)
Location Area Code. For configuration by Network Listen (NWL),
an AP needs a list of candidate LACs that can be chosen NWL.
NWL will look for the least conflicting option.
RAC (rac)
Routing Area Code. For configuration by Network Listen (NWL),
an AP needs a list of candidate RACs that can be chosen by NWL.
NWL will look for the least conflicting option.
SAI SAC (sac)
This is the SAI SAC (Service Access Code) which can be used by
the billing system. If this is not used by the billing system, it is
recommended to set this to 1.
SAI LAC (saiLac)
SAI Location Area Code which can be used by the billing system.
This is a different value than the LAC set in the
lacRacCandidateList for an individual AP. If this is not used by the
billing system, it is recommended to set this to 1.
UARFCN within
(rfParamsCandidateList)
The frequency on which the AP will operate. For configuration by
Network Listen (NWL), an AP needs a list of candidate UARFCNs
that can be chosen by NWL.NWL will look for the least conflicting
option.
Scrambling code
The scrambling code assigned to the AP. For configuration by
within (rfParamsCandidateList) Network Listen (NWL), an AP needs a list of candidate Scrambling
Codes that can be chosen by NWL.NWL will look for the least
conflicting option.
RSSI scan bands
(rssiScanBands_002)
Specify which bands to scan with Network Listen, when
performing RSSI detect and BCCH decode tests. Leave this empty
to scan all bands supported by the AP hardware.
Lat, Long and LCS uncertainty Latitude and longitude of the APs installation site, for RANAP
(lcsLatitude), (lcsLongitude),
location reporting
(lcsUncertainty)
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Installation Overview and Requirements
Page 11
Other Attributes - Residential Deployments
The following table shows some other attributes to consider for initial AP configuration.
Apart from the static neighbour lists, which are usually configured individually, any of these
can be in a general template for all APs or can be set individually.
Parameter
Notes
Neighbour List Population
(neighbourListPopulation)
This determines how the live neighbour list is populated. For
residential deployments, the recommended setting is
MERGE_STSTIC_AND_DETECTED, so that neighbours can be
determined by Network Listen as well as network planning.
Static neighbour lists, GSM and
UMTS
(staticGsmNeighbourList),
(staticUMTSNeighbourList_001
This is generally not needed for residential deployments. Where
APs use Network Listen (NWL) to detect neighbours. However
there may be some cases where it is necessary to configure some
static neighbours.
See [OPM_300] for static neighbour list configuration
Note: In the static neighbour list, the list must be ordered by "best
first" to ensure optimal reselection and handover.
Neighbour PLMNs
(neighbourPlmns)
If specified, this restricts the networks that neighbouring cells can
belong to for populating the neighbour lists by specifying the
MCC/MNC values.
PLMNs To Sync With
(plmnsToSyncWith)
If specified, this restricts the networks that nearby cells can belong
to for frequency synchronisation by specifying the MCC/MNC
values.
PM Reporting URL
(reportingUrl)
For reporting performance measurements to the PMS on the NOS.
Diagnostic Reporting URL
(diagnosticReportingUrl)
Set the URL of the NOS Server diagnostics service. Replace
oam.server with the IP address or FQDN of the server.
reportingUrl (reportingUrl)
Set the URL of the NOS Server measurement reporting service.
Replace oam.server with the IP address or FQDN of the server.
localTimeZone
(localTimeZone)
Set the timezone, in POSIX format, where the APs are located.
This assumes that all APs on the same AC are in the same
timezone, which is the most probable scenario. If APs are spread
across several timezones, this can be an AP-specific setting.
psHandoverEnabled
(psHandoverEnabled)
This is disabled (false) by default. This is the normal setting for
residential deployments.
The number of days an AP can go without resynchronisation
Oscillator Synchronisation
before it raises the relevant alarm.
Timeout
(oscillatorSynchronisationTime
out)
Closed Access vs Open
Access
See section 2.2.6.
Access Control List
(accessControlList)
Entries in the Access Control List are only needed if an AP is
configured for Closed Access. The Access Control List is a white
list of IMSIs that are allowed to use the AP.
Each entry in the Access Control List also has an option to allow
hand-in from the macro network. A UE that is on the white list for
multiple APs can only be Allowed to do this on one AP.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Installation Overview and Requirements
Page 12
2.2.6
Parameter
Notes
IuUP Initialisation
(iuUpInitNoDataSupported)
If this attribute is set to TRUE (default value), the AP includes
NO_DATA RFCs as appropriate in IuUP Initialisation frames.If this
attribute is set to FALSE, the HNB omits any NO_DATA RFCs that
would otherwise have been included.
Network Listen Scan Interval
(applyFrequencyCorrection)
Set the interval for frequency corrections.
Default is 28 days.
1 day for VCTCXO. This is used for most residential deployments.
Any time for OCXO.
Realm Id (realmId)
Allows a nano3G AP to include a configurable realm in the HNBAP
Register Request message. This is only used by Iuh APs.
Access Control
The configurations for four common scenarios are described here:
• Full open access (Enterprise or Residential)
• Open access for Zonal AP (Enterprise only)
• Closed access with CSG parameter broadcast and Access Control via the AC,
which uses the AAA service (Enterprise or Residential)
• Closed access using Legacy Mode, with Access Control via the AC, which uses
the AAA service (Enterprise or Residential)
Note:
In all cases, a UE that needs to make an emergency call can access an AP for that
purpose.
Full Open Access
In this scenario, any UE on the operator's network can use the AP.
Use the following attribute settings:
Attribute
Setting
CSG Access Mode Open
(csgAccessMode)
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Notes
This is the default for nano3G APs.
No other settings are required.
Installation Overview and Requirements
Page 13
Open Access with Zonal AP Functionality
In this scenario, any UE on the operator's network can use the AP. However, the AP will
notify the AC when UEs camp onto the AP, so that UEs registered for location services can
be identified and, if appropriate, trigger some action.
Zonal functionality requires the following attribute settings:
Attribute
Setting
Notes
Zonal AP
(reservedBoolean2)
True
When set to True, this attribute causes the
Iuh 3GAP to request the IMSI from the UEs
when operating in Open Access Mode. This
IMSI is then included in the HNBAP UE
Registration and De-Registration Messages
between the AP and AC.
CSG Access Mode
(csgAccessMode)
Hybrid
Must be set to Hybrid as part of the
mechanism that ensures the IMSI check
takes place with the AC.
Non CSG UE Access Decision Query
(nonCsgUeAccessDecision)
Causes the AP to perform an IMSI challenge
to provide the AC with the IMSI.
The AC checks the IMSI with the AAA service
in the NOS, which always succeeds for
access. The AAA service uses this
information to inform any registered Zonal
presence application.
Access Decision Mode
(accessDecisionMode)
CSG Lite
The AP transmits the CSGIndicator, CSGID,
and HNBIdentifier (when available). This
prevents foreign CSG-capable UEs from
attempting to access the HNB.
This setting does not invoke CSG based
access control.
Closed Subscriber Group
Identifier
(csgId)
0 to 134217727
This is the Closed Subscriber Group Identity.
This is broadcast in SIB3 when Access
Decision Mode is set to CSG Lite. The UE
may have a whitelist of CSGIDs, and may
also permit manual selection of CSGIDs via
the corresponding HNB Names.
HNB Name
(hnbName)
Text
This is an optional name of up to 48
characters.
It is only broadcast (in SIB20) if it has a value
and when Access Decision Mode is set to
CSG Lite.
Together with the CSG ID, this can be used
to identify a CSG cell to a UE user.
Information about zone configuration and implementation and setting up subscribed
services for GSMA OneAPI is outside the scope of this manual. Refer to manuals covering
the nano3G System NOS for further information.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Installation Overview and Requirements
Page 14
2.2.7
Closed Access with CSG Parameter Broadcast
This is the recommended approach for Closed Access.
A Closed Subscriber Group (CSG) identifies a cell to a UE in order for the UE to determine
whether or not it should attempt to use that cell according to a whitelist of CSG identifiers
stored by the UE. This is a 3GPP Release 9 capability, and may or may not be used by Rel
9 UEs.
In this scenario, the AP transmits CSG information and as a result, CSG-aware Release 9
UEs that do not have the AP in their CSG whitelists will ignore the AP. However, this is not
a full implementation of CSG-based access control.
Note:
This assumes that the operator has mechanisms in place to update CSG-aware UEs that
need to use the APs.
All other UEs will attempt to access the AP, but only UEs that are in the whitelist will be
allowed access to the AP.
Use the following attribute settings:
Attribute
Setting
Notes
CSG Access Mode
(csgAccessMode)
Hybrid
The AP also accepts UEs that do not
implement CSG.
Access Decision Mode
(accessDecisionMode)
CSG Lite
The AP transmits the CSGIndicator, CSGID,
and HNBIdentifier (when available). This
prevents foreign CSG-capable UEs from
attempting to access the HNB.
This setting does not invoke CSG based
access control.
Non CSG UE Access Decision Query
(nonCsgUeAccessDecision)
Causes the AP to perform an IMSI challenge
to provide the AC with the IMSI (or IMEI for
emergency calls).
The AC checks the IMSI with the AAA service
in the NOS, which checks the IMSI whitelist
configured for the AP to determine whether or
not the AP is granted access.
Closed Subscriber Group
Identifier
(csgId)
0 to 134217727
This is the Closed Subscriber Group Identity.
This is broadcast in SIB3 when Access
Decision Mode is set to CSG Lite. The UE
may have a whitelist of CSGIDs, and may
also permit manual selection of CSGIDs via
the corresponding HNB Names.
HNB Name
(hnbName)
Text
This is an optional name of up to 48
characters.
It is only broadcast (in SIB20) if it has a value
and when Access Decision Mode is set to
CSG Lite.
Together with the CSG ID, this can be used
to identify a CSG cell to a UE user.
Access Control List
(accessControlList)
List of IMSIs and This is provisioned against an AP but used by
corresponding
the AAA service in the NOS.
phone numbers
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Installation Overview and Requirements
Page 15
2.2.8
Closed Access in Legacy Mode
In this scenario, the AP does not transmit any CSG parameters. Access control is
performed for all UEs.
Use the following attribute settings:
Attribute
Setting
Notes
Access Decision Mode
(accessDecisionMode)
Legacy Mode
Instructs the AP to function in a mode that
does not transmit any CSG parameters.
Non CSG UE Access Decision Query
(nonCsgUeAccessDecision)
Access Control List
(accessControlList)
Causes the AP to perform an IMSI challenge
to provide the AC with the IMSI (or IMEI for
emergency calls).
The AC checks the IMSI with the AAA service
in the NOS, which checks the IMSI whitelist
configured for the AP to determine whether or
not the AP is granted access.
List of IMSIs and This is provisioned against an AP but used by
corresponding
the AAA service in the NOS.
phone numbers
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Installation Overview and Requirements
Page 16
2.2.9
Pre-Prepared Configurations - Optional
The options described here can be used independently or in any combination.
Use an Existing AP
The Create Site Wizard, which is used for the initial pre-provisioning of an AP, allows
selection of an existing AP as the basis for configuring the new AP. This is a one-time
option that is only available in the Create Site Wizard.
Configuration Files
An initial configuration file can be used to rapidly configure the AP via the NOS Create Site
Wizard. This is can be an alternative or in addition to using settings from an existing AP or
using a template. Additional configuration files can be loaded against the AP object after it
has been created by the Create Site Wizard. If they will be used, the location of any
configuration files must be known.
Configuration files are described in section 4.
AP Templates
As with configuration files, an initial AP template can be used to rapidly configure the AP via
the NOS Create Site Wizard. This can be an alternative to or in addition to using settings
from an existing AP or using a configuration file. Additional templates can be applied
against the AP object after it has been created by the Create Site Wizard.
For information on working with templates, see [OPM_415].
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Installation Overview and Requirements
Page 17
2.2.10
Information Required for Commissioning
All nano3G AP models require the configuration details listed in this section. Use this
information to commission an AP from the commissioning terminal, so that the AP can
subsequently connect to its serving NOS Server.
It is possible to commission an AP before taking it on site.
Note:
For residential deployments, commissioning should have already been done at the factory
or by the supplier. If in doubt, contact the supplier for confirmation.
For connecting to the AP from the commissioning terminal:
• User name and password for the AP web server - if necessary, contact customer
support at ip.access for the current user name and password
For commissioning the AP:
• IP Address or FQDN of the serving NOS Server
• IP Address or FQDN of an NTP server
• DHCP or static IP
• If static IP is required:
• IP address for the AP
• Netmask
• IP Address or FQDN of the default gateway
• IP Address or FQDN of the Primary DNS
• IPSec is optional, but if IPSec is required:
• IP Address or FQDN of the IPsec Security Gateway
• IP Address or FQDN of a CRL server
• Optionally, Traffic Selector information (IP address and subnet mask)
A traffic selector defines a range of IP addresses that are sent through the
IPSec tunnel. This allows an extra degree of control over the traffic that is
passed down the IPSec tunnel. Normally, the security gateway controls this
range and no other configuration is needed.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Installation Overview and Requirements
Page 18
2.2.11
Other Items for Commissioning
The items in this section can only be used if the commissioning terminal is running a web
server that provides a path to any ip.access AP software download packages. That is, the
required .sdp files must be present on the commissioning terminal.
Setting up a web server for this purpose on the commissioning terminal is outside the scope
of this manual.
Software Image
If there is a requirement to update the AP’s software during commissioning, the relevant
.sdp file must be present on the commissioning terminal.
ATAS File
If there is a requirement to update the trust anchors in the AP during commissioning, the
relevant .sdp file containing the ATAS package must be present on the commissioning
terminal, ready to be downloaded to the AP. The ATAS package contains augmenting trust
anchors which allow an AP to trust specific security gateways.
This will be necessary where the security gateway certificates are not supplied by ip.access
Limited, to ensure the ATAS package is correct for the security gateway terminating IPsec.
The .sdp file containing the ATAS package must be created for the specific security
gateways used in each implementation of the nano3G System. This must be done in
consultancy with ip.access Limited prior to system deployment.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Installation Overview and Requirements
Page 19
2.3
nano3G S8 AP Site Requirements
In addition to the site requirements for all APs, each S8 AP will require:
• Power supplied in one of the following ways, according to the accessory unit(s)
supplied with the S8 AP:
• From the mains adaptor unit, which requires a suitable mains power supply
point near the AP that is within reach of the adaptor’s cabling
or
• From the supplied POE splitter, which requires a Power over Ethernet
connection to the splitter
• A site for the AP:
• Wall mount location
or
• Stable surface for free standing installation
2.3.1
nano3G S8 AP Power Requirements
Maximum expected power consumption:
• 8 Watts (Rated 9VDC 890mA)
The nano3G S8 AP supports the following power and Ethernet cabling options:
• Direct power from the power adapter
• Power over Ethernet from the POE injector, via the POE splitter
• Power over Ethernet from a POE switch, via the POE splitter
A POE cable must not be inserted directly into the AP.
The power adapter, as well as the POE inserter and splitter supplied by ip.access comply
with LPS requirements in accordance with IEC/EN 60950-1.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Installation Overview and Requirements
Page 20
Power Adapter
A suitable mains power supply point into which the power adapter for the AP can be
plugged.
Only use the power adapter available from ip.access to power the AP:
ip.access part number
PSA15R-090PV-R
Input
100-240V ~ 50/60Hz 0.5A
Output
+9VDC 1.67A
Power over Ethernet
POE requires the use of a power inserter and a splitter. The power inserter is positioned
close to the backhaul network connection and mains supply, while the splitter is positioned
close to the AP.
This is the POE inserter supplied by ip.access:
ip.access part number
236
Input
100/240V ~ 60/50Hz 0.5A
Output
48VDC 0.35A
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Installation Overview and Requirements
Page 21
Only use the POE splitter available from ip.access:
2.3.2
ip.access part number
222A
Input
48VDC 0.35A
Output
9VDC 1.33A
nano3G S8 AP Physical Requirements
A nano3G S8 AP may be installed in one of the following ways (see section 6.2.4):
• Free-standing on a flat stable surface.
• Attached to a wall or partition using two screws that engage in keyhole slots in the
rear surface of the AP.
• Attached to a POE splitter using the two screws that engage in keyhole slots in the
rear surface of the AP. The POE splitter in turn attaches to a wall or partition using
two screws.
The unit must be vertical to ensure that air can circulate freely around it.
It is recommended to install the AP with its front surface facing the area requiring cellular
coverage, unobstructed by walls or partitions that may cause significant RF attenuation.
Dimensions and
weight
Environmental
Height
176mm (without stand)
193mm (with stand)
Width
170mm
Depth
51mm
Approximate Weight
0.42 kg (AP only)
Cooling
Vents on the back at top and bottom
Operating Temperature
0°C to 40°C
Operating Humidity
10 to 70% non-condensing
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Installation Overview and Requirements
Page 22
2.3.3
nano3G S8 AP IP Bandwidth Requirements
At maximum capacity, a nano3G S8 AP will require:
• Downlink: 17Mbps
• Uplink: 1.8Mbps
This will deliver up to 8 voice calls and HSDPA services up to 14.4 Mbps.
Note:
2.3.4
If the available bandwidth on site does not meet the requirements see the Troubleshooting
section 8 N User Configuration.
nano3G S8 AP Sundry Installation Equipment
To mount the POE splitter or the nano3G S8 AP onto the wall:
• 2 self tapping pan head screws, size No. 6 (approx 3.5mm (0.14in) in diameter)
• Wall plugs if required
• Suitable drills and screwdriver
Note:
If the available bandwidth on site does not meet the requirements see the Troubleshooting
section 8 N User Configuration.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Installation Overview and Requirements
Page 23
2.4
nano3G S16 AP Site Requirements
In addition to the site requirements for all APs, each S16 AP will require:
• Power supplied in one of the following ways, according to the accessory unit(s)
supplied with the S16 AP:
• From the mains adaptor unit, which requires a suitable mains power supply
point near the AP that is within reach of the adaptor’s cabling
or
• From the supplied POE splitter, which requires a Power over Ethernet
connection to the splitter
• A site for the AP:
• Wall mount location
or
• Stable surface for free standing installation
2.4.1
nano3G S8 AP Power Requirements
Maximum expected power consumption:
• 8 Watts (Rated 9VDC 890mA)
The nano3G S8 AP supports the following power and Ethernet cabling options:
• Direct power from the power adapter
• Power over Ethernet from the POE injector, via the POE splitter
• Power over Ethernet from a POE switch, via the POE splitter
A POE cable must not be inserted directly into the AP.
The power adapter, as well as the POE inserter and splitter supplied by ip.access comply
with LPS requirements in accordance with IEC/EN 60950-1.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Installation Overview and Requirements
Page 24
Power Adapter
A suitable mains power supply point into which the power adapter for the AP can be
plugged.
Only use the power adapter available from ip.access to power the AP:
ip.access part number
PSA15R-090PV-R
Input
100-240V ~ 50/60Hz 0.5A
Output
+9VDC 1.67A
Power over Ethernet
POE requires the use of a power inserter and a splitter. The power inserter is positioned
close to the backhaul network connection and mains supply, while the splitter is positioned
close to the AP.
This is the POE inserter supplied by ip.access:
ip.access part number
236
Input
100/240V ~ 60/50Hz 0.5A
Output
48VDC 0.35A
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Installation Overview and Requirements
Page 25
Only use the POE splitter available from ip.access:
2.4.2
ip.access part number
222A
Input
48VDC 0.35A
Output
9VDC 1.33A
nano3G S16 AP Physical Requirements
A nano3G S16 AP may be installed in one of the following ways (see section 6.2.4):
• Free-standing on a flat stable surface.
• Attached to a wall or partition using two screws that engage in keyhole slots in the
rear surface of the AP.
• Attached to a POE splitter using the two screws that engage in keyhole slots in the
rear surface of the AP. The POE splitter in turn attaches to a wall or partition using
two screws.
The unit must be vertical to ensure that air can circulate freely around it.
It is recommended to install the AP with its front surface facing the area requiring cellular
coverage, unobstructed by walls or partitions that may cause significant RF attenuation.
Dimensions and
weight
Environmental
Height
176mm (without stand)
193mm (with stand)
Width
170mm
Depth
51mm
Approximate Weight
0.42 kg (AP only)
Cooling
Vents on the back at top and bottom
Operating Temperature
0°C to 40°C
Operating Humidity
10 to 70% non-condensing
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Installation Overview and Requirements
Page 26
2.4.3
nano3G S16 AP IP Bandwidth Requirements
At maximum capacity, a nano3G S16 AP will require:
• Downlink: 17Mbps
• Uplink: 1.9Mbps
This will deliver up to 16 voice calls and HSDPA services up to 14.4 Mbps.
Note:
2.4.4
If the available bandwidth on site does not meet the requirements see the Troubleshooting
section 8 N User Configuration.
nano3G S16 AP Sundry Installation Equipment
To mount the POE splitter or the nano3G S16 AP onto the wall:
• 2 self tapping pan head screws, size No. 6 (approx 3.5mm (0.14in) in diameter)
• Wall plugs if required
• Suitable drills and screwdriver
Note:
If the available bandwidth on site does not meet the requirements see the Troubleshooting
section 8 N User Configuration.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Installation Overview and Requirements
Page 27
2.5
nano3G E8 AP and nano3G E16 AP Site Requirements
In addition to the site requirements for all APs, each E8 AP and E16 AP will require:
• A site for wall mounting
• Power supplied in one of the following ways:
• From the supplied POE injector, which requires a suitable mains power
supply point near the injector
or
• From a mains adaptor unit, supplied separately, which requires a suitable
mains power supply point near the AP that is within reach of the adaptor’s
cabling
2.5.1
nano3G E8 AP and E16 AP Power Requirements
Maximum expected power consumption:
• 20 Watts (Rated +12V on the DC input or -48V DC on the POE+ input)
The nano3G E8 AP and E16 AP support the following power options:
• Power over Ethernet from a IEEE 802.3at compliant POE+ power source
equipment - a suitable POE+ inserter is supplied with the AP
• Direct power from a suitable DC source (+12V, 2.5A rated centre positive 2.1mm
jack) - a suitable mains adaptor is available separately
These power options are mutually exclusive. When POE+ is used, a DC power adapter
must not be plugged in to the AP and vice versa.
The nano3G E8 AP and E16 AP can be used with any IEEE 802.3at compliant POE+ power
source.
Note:
The Ethernet cable carrying POE+ must be plugged into the LAN 1 port. The LAN 2 port,
next to LAN 1, is not used and does not support POE.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Installation Overview and Requirements
Page 28
POE+ Injector
The POE+ injector unit is supplied as standard with each nano3G E8 AP and E16 AP. The
POE+ injector has two Ethernet connections, one for connection to the main LAN, the other
for connection to the AP. The POE+ injector can be located anywhere on the cable run
between the network switch and the AP, including locally at the AP or remotely at the
network switch.
The POE+ injector is a pass-through connector for the LAN. Its function is to add POE+ to
provide power to the AP. Therefore, the maximum cable run from the network switch to the
AP is 100m, regardless of the placement of the POE+ injector.
The POE+ injector supplied by ip.access complies with LPS requirements in accordance
with IEC/EN 60950-1.
2.5.2
nano3G E8 AP and E16 AP Physical Requirements
A nano3G E8 AP or E16 AP is installed by attaching its mounting plate to a wall or partition
with screws, then sliding the rear surface of the AP onto the mounting plate (see section
6.4.6).
Pay attention to ensure that air can circulate freely around the unit. The unit must be
vertical.
It is recommended to install the AP with its front surface facing the area requiring cellular
coverage, unobstructed by walls or partitions that may cause significant RF attenuation.
Dimensions and
weight
Environmental
Height
211mm
Width
274mm
Depth
58.6mm
Approximate Weight
1.75 kg
Cooling
Vents on the back at top and bottom
Operating Temperature
0°C to +45°C
Operating Humidity
10 to 70% non-condensing
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Installation Overview and Requirements
Page 29
2.5.3
nano3G E8 AP IP Bandwidth Requirements
At maximum capacity and with IPsec in use, a nano3G E8 AP will require:
• Downlink: 17Mbps
• Uplink: 1.8Mbps
This will deliver up to 8 voice calls and HSDPA services up to 14.4 Mbps.
Note:
2.5.4
If the available bandwidth on site does not meet the requirements see the Troubleshooting
section 8.
nano3G E16 AP IP Bandwidth Requirements
At maximum capacity and with IPsec in use, a nano3G E16 AP will require:
• Downlink: 17Mbps
• Uplink: 1.9Mbps
This will deliver up to 16 voice calls and HSDPA services up to 14.4 Mbps.
Note:
2.5.5
If the available bandwidth on site does not meet the requirements see the Troubleshooting
section 8.
nano3G E8 AP and E16 AP Installation Tool Requirements
To mount the bracket onto the wall:
• 6 pan head screws, size No. 6 (approx 3.5mm (0.14in) in diameter) – 4 for the AP
bracket, 2 for the POE+ adapter
Note:
No screws are supplied to mount the AP or the POE+ unit.
• Wall plugs if required.
• Suitable drills and screwdriver.
Note:
If the available bandwidth on site does not meet the requirements see the Troubleshooting
section 8 N User Configuration.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Installation Overview and Requirements
Page 30
3
Pre-Provisioning a nano3G AP
The nano3G AP must be pre-provisioned on the NOS Server before it can be brought into
service. It is recommended to do this in advance of physical site installation. An AP is
pre-provisioned using the Create Site Wizard in the NOS Client.
The user account used for these activities in the NOS Client must have Full Access rights to
the relevant BSMIS APs PerAC object.
3.1
Pre-Provisioning Parameters
For the pre-provisioning parameters refer to section 2.2.3.
3.2
Create a Site for a New AP
Use the Create Site Wizard in the NOS Client to create a site object and child AP object for
an AP. The physical AP will be matched to the AP object according to its serial number. The
configuration data for the AP object is stored on the AP’s serving NOS Server. When a
commissioned AP starts up, it connects to the serving NOS Server and downloads the
configuration. This approach means that the AP’s configuration can be entered and
changed on the NOS Server in advance of physically installing an AP on site.
3.2.1
Start the Create Site Wizard
1)
Login to the NOS Client with a user ID that has Full Access rights to the required
BSMIS APs per AC object.
2)
Find the required BSMIS APs Per AC object.
Hence, drill down to the AP like this:
Root > APs > BSMIS APs Per AC
Note:
3)
The display name of the BSMIS APs Per AC object may have been
changed to make the serving AC easier to identify.
Right-click the BSMIS object and, from the menu, select Create > Create Site.
The first page of the Create Site Wizard will appear:
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Pre-Provisioning a nano3G AP
Page 31
4)
Select the Object Class radio button and in the drop-down list on the left and select
one of the following: This is applicable to E8 APs, E16 APs and S8 APs.
• Nano-8 or Nano-16 3G AP (SR2.0 -). This applies to N3G_2.83 AP
software.
• Nano 3G AP (SR2.4 -). This applies to N3G_2.85 or later AP software.
3.2.2
Note:
Do not select Nano-4 3G AP (SR2.0 -) as this is not supported in
N3G_2.92.
Note:
If they are present, do not choose either of the choices for (SR1.2 PRE-SR2.0). These are only used for APs running software from a
release prior to N3G_2.92. These choices must be present for backwards
compatibility and they enable AP upgrades from previous releases.
Optional - Use an Existing AP Configuration
5)
Click Next and the AP Selection page of the wizard will appear:
Optionally use this page to copy the configuration of an existing AP.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Pre-Provisioning a nano3G AP
Page 32
6)
To copy the configuration from an existing AP, click the Select button. The Select
linked object browser will appear, initially showing the Root object in the NOS
object hierarchy. Drill down to find the required AP. For example:
The DN box will show the Distinguished Name for the selected AP. This uniquely
identifies the AP object within the object hierarchy on this NOS. The AP object
must be the same type of AP object as has been selected for the new site.
7)
3.2.3
Click OK and the DN will be shown on the AP Selection page of the wizard.
Optional - File Selection
8)
Click Next and the File Selection page of the wizard will appear:
Optionally use this page to load a configuration file for the AP. The three options
for file sources are:
• Do not load a file - no configuration file will be loaded - if preferred, it is
possible to load a configuration file later using the Load Attributes Wizard
• From local file - a configuration file stored on the local computer running the
NOS Client
• From server file - a configuration file saved on the NOS server by saving the
attributes from an AP
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Pre-Provisioning a nano3G AP
Page 33
Although files can be selected for all sources, only the item for the selected radio
button will be used on moving to the next page of the wizard. The AP type in the
chosen configuration file must be the same type of AP object as has been selected
for the new site.
For information on preparing an configuration file for an AP, see section 4.
Select a Local File
9)
Click the radio button for From local file, then click the browse button on the right.
The file browser will appear. Browse to the location of the required configuration
file and select it. For example:
10)
Click Open and the file name will be shown in the box for Local file.
Select a File Saved on the NOS Server
11)
Click the radio button for From server file, then click the browse button on the
right. A list of configuration files saved on the NOS server will appear. For example:
12)
Click the required configuration file in the list, then click Load. The list will close
and the file name will be shown in the box for Server file.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Pre-Provisioning a nano3G AP
Page 34
3.2.4
Optional - Select an AP Template
13)
If any templates of the correct object type are available, the Template Selection
page will appear:
Optionally use this page to load a template for the AP. Typically the template can
contain a reference configuration for the AP according to the AP’s intended
location and/or usage.
For information on working with templates, see [OPM_415].
14)
3.2.5
To use a template, click the required template in the list, then click Next. If a
template is not required for this AP, click Next without selecting anything in the list.
Enter AP Identification Details
15)
The page for specifying AP identification details will appear:
Notice that the 3G AC Name, Management Server Address and Security Gateway
are set automatically according to the BSMIS object selected for invoking the
wizard. The 3G AC Name and Management Server Address may not be changed.
16)
Click in the Site ID box and type a numeric ID. This must be unique within the
parent AC object. As the ID number is entered, the Site Name is set automatically.
Note:
Do not use the AP’s serial number for the Site ID or the HNB C-Id. An AP
can be physically replaced at a site, in which case the site configuration
will stay the same, but the AP’s serial number will be updated.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Pre-Provisioning a nano3G AP
Page 35
17)
If required, click in the Site Name box and type any text to replace the default Site
Name. Enter text that will help identify this site.
18)
Click in the 3G AP Equipment Identity box and enter the serial number for the
AP. This must be an exact match for the AP’s serial number. If this does not match,
the NOS Server will not allow the AP to connect.
19)
Click in the HNB C-Id box and type a numeric ID. This must also be unique within
the parent BSMIS object, and hence is unique within the HNB-GW, that is, the AC.
This could be the same as the Site ID, depending on the network policy in place.
20)
If the default Security Gateway is not correct for this AP, click the Select button
and choose a different Security Gateway from the available gateways defined
under Root > NOS > Security Gateways.
21)
Click Next.
•
If there are any errors on this page, the error will be displayed and the
wizard will stay on the AP identity details page. For example, the
identification details are checked to ensure there are no duplication conflicts
with existing APs. Edit the required field(s) to correct the errors then click
Next again.
• The wizard will go to the next page if there are no errors.
3.2.6
Select AP Location
1)
To provide the location of the configured AP, enter the Latitude, Longitude and
Radius of Uncertainty to the appropriate fields (optional), this will verify the AP,
then click Next.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Pre-Provisioning a nano3G AP
Page 36
3.2.7
Select NTP Servers
2)
The page for selecting NTP servers will appear:
If an existing AP, template or file was chosen, the NTP servers may have been
automatically selected from one of these sources. Any changes on this page of the
wizard will override settings from an existing AP, template or file.
3.2.8
3)
Click the drop-down lists to choose up to four NTP servers for the AP. The
available NTP servers are defined under Root > NOS > NTP Servers. At least one
NTP server must be selected.
4)
Click Next.
Modify NAS and Network Listen Settings
5)
The page for NAS and Network Listen details will appear:
The initial values on this page of the wizard are selected as follows:
• MCC and MNC: These are copied from the target AC. That is, the AC
associated with the parent AC Detail object. The RNC-Id is also copied, but
this is not shown in the wizard.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Pre-Provisioning a nano3G AP
Page 37
• SAI SAC and SAI LAC: If an existing AP, template or file was chosen, the
these values may have been automatically selected from one of these
sources.
• LAC RAC Candidate List and RF Parameters Candidate List: These are
under the Network Listen Control Package. If an existing AP, template or file
was chosen, the these values may have been automatically selected from
one of these sources.
In all cases, any changes on this page of the wizard will override any automatically
selected settings.
6)
If required, change the NAS entries. This is only necessary if the correct values
have not been selected automatically.
7)
Click the Network Listen Control Package:
The number of entries within the lists in Network Listen Control Package will
depend on how the AP is configured:
• Static configuration: If an AP will have a planned static configuration, enter
only one set of values for each list. That is, one LAC-RAC combination and
one set of RF Parameters. This is typically the scenario for enterprise
deployments where the parameters have been determined by network
planning.
• Dynamic configuration: If an AP will use Network Listen results to
automatically select its parameter settings, in an attempt to choose optimal
settings for its detected RF environment, enter multiple sets of values for
each list. That is, multiple LAC-RAC combinations and multiple sets of RF
Parameters. This is typically the scenario for domestic plug-and-play or
SOHO deployments. Also, in this scenario, it is expected that an existing AP,
template or file will have been selected which has pre-configured lists. If this
is not the case, it may be more efficient to enter a single set of parameters in
the wizard, and then either configure the AP object directly or load
pre-configured lists against the AP object.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Pre-Provisioning a nano3G AP
Page 38
8)
If the LAC/RAC entries are invalid, as in the example, drill down into the LAC RAC Candidate List to find the invalid entry:
9)
Enter a valid LAC/RAC combination that this AP can use, according to network
planning for this AP. For example:
Multiple RACs can be configured for each LAC. At least one LAC/RAC
combination must be provided.
10)
Select the RF Parameters Candidate List.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Pre-Provisioning a nano3G AP
Page 39
11)
If the list is empty, click the + button to add a new entry to the list. For example:
12)
Drill down into the list entry. For a new list item, all the values will be zero, as in this
example:
13)
Enter or modify the uarfcn, scramblingCode and dummyCellId values for this
AP.
14)
Click Finish.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Pre-Provisioning a nano3G AP
Page 40
Progress will be displayed while the objects are created:
The site and the AP object will be added under the BSMIS APs Per AC object and
can now be selected for further actions.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Pre-Provisioning a nano3G AP
Page 41
3.3
Apply an Attribute Configuration to the AP
This is optional. This could be done if, for example:
• No AP configuration file or template was used as the basis for the AP’s initial
configuration
• There is a requirement to load multiple configuration files and/or templates, in
addition to any file and/or template already loaded in the Create Site Wizard
3.3.1
Load a Configuration File for the AP
For information on preparing a configuration file for an AP, see section 4.
1)
Ensure the configuration file is available on the NOS Server or the computer
running the NOS Client.
2)
If not already logged in, log in to the NOS Client with a user name that has Full
Access to the AP.
3)
To start the NOS Load Attributes Wizard, right-click on the AP object in the NOS
Client and then select Load Attributes From File.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Pre-Provisioning a nano3G AP
Page 42
3.3.2
4)
The Load Attributes From File Wizard shows the chosen AP object:
5)
Choose From server file or From local file, according to the location of the edited
configuration file.
6)
Click the Browse button
configuration file.
7)
Click the Load or Open, according to which file browser is in use, and the file
name is shown in the Load Attributes wizard. Click Next.
8)
By default the operation is scheduled for Now, so click Finish to load and apply the
configuration settings.
9)
Repeat as needed, if there are multiple configuration files.
then use the file browser to select the edited
Apply an AP Template to the AP
For information on working with templates, see [OPM_415].
1)
If not already logged in, log in to the NOS Client with a user name that has Full
Access to the AP.
2)
Find the required AP template under NOS > Templates.
The object type must match. That is, use an apNano8_020 template for E8 APs,
E16 APs and S8 APs. Choosing a template with a different object type will have no
effect on the target AP.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Pre-Provisioning a nano3G AP
Page 43
3)
Right-click Templates, select Copy of Service Manager and then select Apply
Template.
4)
Select the Template Operation Package.
5)
Click the Edit button for the Target Objects.
6)
Browse to the correct AP object under APs > AC > Site > AP.
7)
Click the check box next to the AP object. All of the AP’s ancestor objects are also
selected.
8)
Click OK to set the target object and return to the Apply Template wizard.
9)
Click OK. The attribute settings in the template will be applied to the AP object.
10)
Repeat as needed, if there are multiple templates to apply.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Pre-Provisioning a nano3G AP
Page 44
4
Configuration File Preparation
The attribute values for configuring a nano3G AP can be stored in an XML file, and then
loaded via the NOS Client to provision the AP. This configuration file of attributes can be
loaded when creating the site for the AP or at any time after that once the AP object exists.
This section describes how to prepare one or more configuration files of attributes for
provisioning nano3G APs. This can be done in combination with the Create Site Wizard and
configuration adjustments from the NOS Client, according to whichever method is best
suited for given configuration tasks.
4.1
Overview of Configuration Files
A configuration file is an XML file containing an AP object that has named attributes and the
value for each attribute. Each attribute definition is of the form:
VALUE
Where:
• NUM is the Registered As number, as specified in the MIB for this attribute
• NAME is the attribute name, as specified in the MIB for this attribute
• VALUE is the attribute value, which must conform to the attribute’s definition in the
MIB
The attribute types and values they may take are formally described in [REF_110].
Note:
In the configuration file, the values of compound attributes, such as RAB types, are defined
within brackets (). In the NOS Client, the compound types are the complex attributes that
have multiple levels within the Navigation and Properties panes. To work with compound
attributes in a configuration file, it is recommended to use the structure in the OMC-R Client
as a guide to editing the compound attribute.
Note:
In [REF_110], there is a distinction between expert and non-expert attributes. As a general
rule, it is recommended to leave expert attributes at their default values.
The configuration file must contain the correct distinguished name (DN) for the target AP.
The NOS Client will not load a file if the DN does not match. In the configuration file, the DN
is the localDn field near the beginning of the file. To change which AP this file applies to,
edit the last part of the DN which defines the connection instance (the site) and AP
instance.
Although a configuration file can be created from scratch, it is more practical to save a file
from within the NOS Client from an object of the same type and then edit the file for the
target object. The resulting configuration file can then be imported against the target object,
which in this case will be an AP.
Configuration files must be imported one at a time, but there is no restriction on the number
of configuration files that can be imported to configure any given object. This means it is
possible to create a generic configuration file, which contains attribute values common to all
APs of the same type. Typically, this can be started by exporting the configuration from an
AP that has already been fully configured, and then edited to remove non-generic
attributes. Once the generic file has been created, it must be saved for each AP, with the
correct DN.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Configuration File Preparation
Page 45
Optionally also create a file for each individual AP with additional settings particular to each
AP. However, if the majority of required settings are in the generic file, it may be easier to
simply load the generic file then use the NOS Client for fine tuning the configuration of an
individual AP.
Note:
After initial provisioning from a configuration file the NOS Client can be used to set
attributes or a configuration file can be edited to set more attributes, for example when
using configuration information from a radio planning system. To obtain a sample file with all
the attributes that can be configured, export a configuration file as described in section 4.2
and inspect its content.
4.2
Create a Configuration File for nano3G APs
4.2.1
Save Attributes to File for One AP
A configuration file can be created from an existing AP. It is recommended to do this in
preference to starting a file from scratch.
To start a configuration file by saving the configuration of an existing AP:
1)
Login to the NOS Client with a user ID that has Full Access rights to the required
AP.
2)
Find the required AP within the APs area. Find the AC the AP is connected to (i.e.
the BSMIS APs Per AC object) then locate the AP within its Site.
Hence, drill down to the AP like this:
Root > APs > BSMIS APs Per AC > Site > AP
3)
Right-click the relevant AP object and select Save Attributes to File. The Save
Attributes Wizard will appear.
4)
Select To local file and use the browse button to choose a suitable directory on the
client computer for saving the AP configuration file (the browser dialogue can also
create new directories).
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Configuration File Preparation
Page 46
4.2.2
5)
When a suitable directory has been selected or created, click Next. The Enter or
amend attributes screen will appear:
6)
Select the Scheduled Operation Package and uncheck Lock Allowed as this can
cause service interruption. Click Finish. A confirmation message stating file copied
successfully will appear, click OK.
7)
One configuration file will be saved in the directory for each AP object.
Save Attributes to File for Multiple APs
Use this function to make a backup of the configuration attributes for all APs within the
AC BSMIS of one AC. One configuration file will be saved for all AP objects below the
selected AC BSMIS object. The file name is generated automatically with the following
format:.
Bulk backup is local only (i.e. on the Client computer). It is not possible to bulk backup
the AP configurations on the SDP Server.
The whole directory can be restored.
1)
Login to the NOS Client with a user ID that has Full Access rights to the required
AP.
Note:
2)
For full information on using the NOS Client, see [OPM_415].
Find the required AP within the APs area. Find the AC the AP is connected to (i.e.
the BSMIS APs Per AC object) then locate the APwithin its Site.
Hence, drill down to the AP like this:
Root > APs > BSMIS APs Per AC
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Configuration File Preparation
Page 47
3)
Right-click the relevant BSMIS object and select Save Attributes to File. The
Save Attributes Wizard will appear:
4)
Tick the check box to Include the descendants of this object. Select To local file
and use the browse button to choose a suitable directory on the client computer for
saving the AP configuration file (the browser dialogue can also create new
directories).
5)
When a suitable directory has been selected or created, click Next. The Enter or
amend attributes screen will appear:
6)
Select the Scheduled Operation Package and uncheck Lock Allowed as this can
cause service interruption. Click Finish. A confirmation message stating file copied
successfully will appear, click OK.
7)
One configuration file will be saved in the directory for each AP object.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Configuration File Preparation
Page 48
5
Commission a nano3G AP
This procedure configures the nano3G AP with the settings it needs to establish a
connection with its serving NOS Server. Once commissioning is complete, use the NOS
Client for any remaining configuration and to bring the AP into service.
An AP can be commissioned either in advance of the site visit via a commissioning
computer or on site via a commissioning laptop. This procedure is identical in both cases.
To allow for both of these scenarios, the term commissioning terminal is used to refer to any
laptop or computer used for commissioning.
Note:
5.1
For residential deployments, commissioning should have already been done at the factory
or by the supplier. If in doubt, contact the supplier for confirmation. Where an AP is already
commissioned, ignore all of section 5.
Configure a Commissioning Terminal to Connect to the AP
1)
Open the Windows Control Panel on the terminal.
2)
Go to Network Connections.
3)
Right-click the relevant Local Area Connection and select Properties.
4)
In the list of items on the General tab, select Internet Protocol (TCP/IP) and then
click Properties. The following dialogue appears:
5)
If it is not possible to leave this network connection permanently configured for AP
commissioning, make a note of the current settings.
6)
Click the Use the following IP address radio button.
7)
Set the IP Address to 192.168.0.2.
8)
Set the Subnet Mask to 255.255.255.0.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Commission a nano3G AP
Page 49
9)
There is no default gateway, so ensure the default gateway address is cleared.
10)
Click OK to close and save the changes in each of the two dialogues. Also close
the Control Panel.
5.2
Start Up the AP
5.2.1
Start up a nano3G S8 AP
1)
To power up an S8 AP or S16 AP, either.
• Use the power supply provided with the AP
or
• Connect a POE source to the splitter unit, then connect the short power
cable from the POE Splitter unit to the DC input on the AP
Note:
2)
5.2.2
The AP may have been provided with only one of these options.
Connect the commissioning terminal directly to the AP with an Ethernet cable.
Start up a nano3G E8 AP or E16 AP
1)
To power up a nano3G E8 AP or E16 AP, typically do one of the following:
• Connect a cable to carry POE+ from the injector to the LAN1 port on the AP,
then plug the POE+ injector into the mains
or
• Connect the optional power supply for the AP to the AP’s 12V DC input
2)
To establish an Ethernet connection between an E8 AP or E16 AP and the
commissioning terminal, do one of the following according to how the AP has been
powered up:
• If using POE+ to power the AP, connect the Ethernet cable from the
commissioning terminal to the LAN input on the POE+ injector unit
or
• If not using POE+, connect the Ethernet cable from the commissioning
terminal directly to the LAN1 port on the AP
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Commission a nano3G AP
Page 50
5.3
Access the Commissioning Web Page for the AP
The commissioning web page is only accessible after performing a factory reset. The login
prompt for this web page is also only available for 60 seconds, after which the AP will
attempt to boot normally.
1)
Start a web browser on the commissioning terminal.
2)
In the address bar, type in the pre-defined static IP address and port number for
the web server, but do not press  yet:
http://192.168.0.1:8089
3)
Perform a factory reset on the AP:
• Press and hold the reset button. Initially, the service LED blinks rapidly.
• When the service LED changes from blinking rapidly to blinking slowly,
release the reset button.
• The LED continues to flash slowly until the factory reset completes, at which
point the LED is extinguished and the AP reboots.
Note:
4)
Wait a few seconds, then press  in the web browser. A login screen should
appear. If the login screen does not appear immediately, refresh the browser
screen until it appears.
ALERT:
5)
See section 8.3 for more information about factory reset.
When the AP starts up, the login prompt for the commissioning web
page is only available for 60 seconds. If the login prompt is missed,
press the reset button to repeat the factory reset.
Enter the commissioning user name and the password (supplied separately for
security reasons).
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Commission a nano3G AP
Page 51
After entering the correct user name and password, the Connection Config page
appears:
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Commission a nano3G AP
Page 52
5.4
Download Activities
If it is necessary to download a software or ATAS package to the AP, this must be done
before configuring the connection to the NOS Server. This is because the ATAS package in
particular may be needed so that the AP can access the NOS Server through the security
gateway. See section 2.2.11 for extra information about software and ATAS packages.
This can only be done if the commissioning terminal is running a web server that provides a
path to any ip.access AP software download packages. That is, the required .sdp files must
be present on the commissioning terminal.
Setting up a web server for this purpose on the commissioning terminal is outside the scope
of this manual.
5.4.1
Optional - Software Download
Use the SW Download page to download a different version of AP software to the AP from
the commissioning terminal to the standby memory bank. Then switch banks to the new
software version, which restarts the AP.
6)
Click the SW Download link on the left. The web page for downloading software
will be shown. This also provides details about the current software installed on the
AP.
7)
In the text box, enter the URL for the SDP file stored on the commissioning
terminal. For example, the URL of a software file for a nano3G E8 AP might be:
http://192.168.0.2/webservername/220H007_.sdp
Where  is the actual build version of the required software package.
8)
Click Begin Download.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Commission a nano3G AP
Page 53
9)
Wait about a minute for the download to take place.
10)
To restart the AP from the new software just downloaded, briefly press the reset
button.
11)
Once the AP has started, repeat the factory reset by holding down the reset button
for at least 5 seconds. When the AP restarts this time, refresh the browser to
access the login prompt and login again with the commissioning user name and
password.
12)
Click the SW Download link on the left.
13)
Inspect the software version information to verify that the AP has booted from the
downloaded software.
14)
To ensure the standby bank also has the latest software version, repeat the
software download, but do not restart the AP. It is not necessary to restart the AP
once it is already running the updated software.
This ensures the AP does not have old software on the standby bank. Hence, if the
AP is commanded to switch banks, it will run up-to-date software.
5.4.2
ATAS Check and Download
This is only required if the AP needs an additional ATAS package that is not already factory
installed. For example, if the AP will use IPsec and the security gateway certificates are not
supplied by ip.access Limited.
Use the ATAS Download page to check the current ATAS package. If necessary, also
download a package of trust anchors that are appropriate for the AP’s target network.
ALERT:
The ATAS package on the AP must be correct according to the IPsec security gateway
(SecGW) that will terminate the IPsec connection for the AP. If the ATAS package is
incorrect, the AP will not connect to the SecGW and hence will be unable to enter service.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Commission a nano3G AP
Page 54
15)
Click the ATAS Download link on the left. The web page for downloading an ATAS
bundle will be shown. This will also show any current ATAS version information, if
applicable.
16)
Inspect the current ATAS version information. If the ATAS package is already
correct then it is not necessary to re-download the ATAS package, so skip to
section 5.5.
17)
In the text box, enter the URL for the SDP file stored on the commissioning
terminal, which contains the required ATAS bundle. For example:
http://192.168.0.2/webservername/atas_file.sdp
18)
Click Begin Download.
19)
Wait about a minute.
20)
Click Extract Previously Downloaded ATAS.
21)
Wait about a minute. If the ATAS version information is not refreshed, use the
appropriate browser command to refresh the web page.
22)
Inspect the ATAS version information on the ATAS Download page to verify it is
now correct.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Commission a nano3G AP
Page 55
5.5
Configure the Connection to the NOS Server
5.5.1
Static IP Configuration
Obtaining an IP address with DHCP is recommended for the nano3G AP, and this is
selected by default. Only execute this section if static IP configuration is needed. This must
be done before completing the Connection Config page.
23)
If static IP is required, click the IP Config link on the left. The IP Configuration page
appears.
24)
Click the Static Config radio button.
25)
Edit the IP Address, Subnet Mask, Default Gateway and Primary DNS Server
parameters as needed and then click Apply.
Note:
26)
At this point it may be useful to make a separate note of the parameter
values entered in this screen. Alternatively, save a screenshot of the web
page (information about how to take a screenshot is outside the scope of
this manual).
Click the Connection Config link on the left.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Commission a nano3G AP
Page 56
5.5.2
Configure the NOS Server Connection
27)
If a secure connection is required, select IPSec Enabled. Also enter the address
for the IPSec Gateway and the Traffic Selector address and subnet mask.
28)
Enter addresses for the NOS Server (Management Server URL), a suitable CRL
server and the NTP server.
The settings applied on this page are retained permanently as the default set of
these parameters, and can only be subsequently changed on this web page from a
commissioning terminal.
Note:
29)
To save the configuration, click Apply Changes.
Note:
5.5.3
The NTP and CRL servers must be accessible to the AP on start up,
before it has established an IPsec tunnel to the Security Gateway.
At this point it may be useful to make a separate note of the parameter
values entered in this screen. Alternatively, save a screenshot of the web
page (information about how to take a screenshot is outside the scope of
this manual).
Complete the AP Commissioning
30)
Click the Connection Config link on the left, to ensure the correct page is
showing.
31)
To start the AP in normal operation mode, click Complete Commissioning.
32)
Acknowledge the warning about changes in the IP configuration and click OK.
33)
When the initial configuration is complete, power off the AP and disconnect it from
the commissioning terminal.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Commission a nano3G AP
Page 57
At this point, the commissioning web page is no longer accessible. If there are
configuration errors that prevent the AP connecting to its serving NOS Server, the
commissioning procedure must be started again after resetting the AP with a
factory reset. See section 8.3 for factory reset instructions.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Commission a nano3G AP
Page 58
5.6
Commissioning Finished
Commissioning the AP is now finished.
From this point on, the AP must be managed from the NOS Client, via the NOS Server. If
the AP has not been pre-provisioned in the NOS Server, it must be configured before it is
can enter service. See section 3 for information about AP provisioning.
5.6.1
Finished On Site Commissioning
If commissioning has been done on site, return to the site installation procedure in section
6.2.3 or 6.4.5, as appropriate.
5.6.2
Finished Advance Commissioning
If commissioning has been done in advance of sending the AP on site, it is advisable to
ensure that the AP will connect to its serving NOS Server prior to sending the AP on site. To
do this:
1)
Verify that the AP has been pre-provisioned with a Site in the serving NOS Server.
2)
Provide the AP with an appropriate network connection. If the AP has been
commissioned to use IPsec, this means a network connection that will go via the
Security Gateway, which is likely to require connection of the AP to an external
network.
3)
Power up the AP.
4)
Use the NOS Client to verify that the AP has connected to its serving NOS Server.
The Site for the AP and the AP object should have a green tick symbol against its
icon.
5)
After verifying this, re-pack the AP so that it is ready for delivery to its intended site.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Commission a nano3G AP
Page 59
6
nano3G AP Hardware Installation
This section documents the procedures for installing the nano3G AP hardware and physical
connections.
The following hardware variants are described:
• 6.2 nano3G S8 AP Hardware Installation
• 6.3 nano3G S16 AP Hardware Installation
• 6.4 nano3G E8 AP and E16 AP Hardware Installation
Note:
If possible, the engineer should stay on site until the AP is brought into service, ready to
make test calls to verify the AP has been configured correctly from the NOS.
Note:
For residential deployments where an AP is installed by an end-user following an easy
setup guide, ignore all of section 6.
6.1
Warnings and Regulatory Information
For all warnings and regulatory information, see section 9.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
nano3G AP Hardware Installation
Page 60
6.2
nano3G S8 AP Hardware Installation
6.2.1
Unpack the nano3G S8 AP
1)
Unpack the nano3G S8 AP and its accessories.
Box contents may vary, but typically the box should contain the following:
• nano3G S8 AP unit
• nano3G S8 AP stand
Plus any combination of the following items, according to the options ordered:
• Mains adaptor unit
• POE injector unit and suitable mains cable
• POE splitter unit
Note:
No screws are supplied to mount the AP or the splitter unit.
2)
Check that the serial number on the nano3G S8 AP unit matches the label on the
box.
3)
Check that the items have not been damaged in transit.
For any damaged units, contact the supplier immediately for returns advice.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
nano3G AP Hardware Installation
Page 61
6.2.2
Commission the nano3G S8 AP
Configure the AP so that it will connect to its serving NOS Server. If this has not been done
already, do this now, before installing the AP in its final location. For instructions, see
section 5.
6.2.3
Cable Connections
Use one of the cable connection schemes described below, to provide power and the LAN
connection.
Supplied PSU and LAN
S8
AP
Mains
Input
9V DC
cable to AP
Supplied
PSU
Backhaul
Network to AC
LAN Cable to
nearest switch/gateway
(max 100m)
When the supplied PSU is used to power the AP, the POE injector and splitter units are not
needed. However, this means that the mains socket providing power to the AP must be
within reach of the cabling included with the supplied PSU (less than 2m).
POE Injector and Splitter
S8
AP
9V DC
cable to AP
(100mm)
Mains Input
POE
Splitter
Injector
LAN cable
(100mm)
LAN Cable
to nearest
switch/gateway
Backhaul
Network to AC
Maximum total cable length
between nearest switch/gateway and AP is 100m
This improves flexibility for locating the AP, as the AP can be up to approximately 100m
from a mains power supply, depending on the placement of the POE Injector.
In this case, the PSU for the AP is not used. The injector takes a direct mains input using
the supplied mains cable.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
nano3G AP Hardware Installation
Page 62
POE Switch and Splitter
S8
AP
Mains Input
POE
Switch
POE
(max 99.8m)
9V DC
cable to AP
(100mm)
Splitter
LAN cable
(100mm)
LAN
cable
Backhaul
Network to AC
In this case, the POE switch is a third-party item. This has similar benefits to using the POE
injector, but a POE switch will typically only be used if there are multiple APs on site and/or
there is other equipment that can take advantage of POE. The supplied POE splitter must
be used with the AP.
Notice that the POE cable to the splitter should not exceed 99.8m in length. This will ensure
that the total cable run from the POE switch to the AP is within the Ethernet limit of 100m.
6.2.4
Note:
Mount the nano3G S8 AP
The nano3G S8 AP should be installed in a position so that it is at least 2m away from the
area where handsets are normally used.
The nano3G S8 AP must be mounted vertically in a location that allows air circulation
around the unit. The AP can be mounted in the following ways:
• On a stand
• Directly onto the wall at or above head height
• Onto the splitter unit on the wall at or above head height
The nano3G S8 AP has two holes at the back for direct wall mounting or mounting on the
POE splitter:
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
nano3G AP Hardware Installation
Page 63
Mount the nano3G S8 AP on a Stand
1)
Plug the Ethernet cable and the power cable into the AP or plug the cables from
the POE splitter into the AP.
2)
Slide the AP onto the stand.
3)
Place the AP on its stand on a stable flat surface.
Mount the nano3G S8 AP directly onto the wall
1)
Drill two holes 70mm (2.76in) apart vertically for the two screws.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
nano3G AP Hardware Installation
Page 64
2)
Insert wall plugs (if required) and secure the screws leaving approximately 3mm
(0.12in) clearance between the screw heads and the wall.
3)
Plug the Ethernet cable and the power cable into the AP.
Note:
4)
If using the POE splitter when wall mounting the AP, it is recommended to
mount the AP directly on the POE splitter, as in the following section. In
some cases, it may be necessary to mount the AP and the POE splitter on
the wall separately to minimise how far the AP projects from the wall. In
this case, position the POE splitter below the AP where the 100mm
cables will reach the AP.
Slide the AP onto the 2 screws.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
nano3G AP Hardware Installation
Page 65
Mount the nano3G S8 AP onto the splitter unit on the wall
1)
Drill two holes 66mm (2.6in) apart horizontally for the two screws.
2)
Secure the splitter unit to the wall using two screws.
Ensure that the Ethernet socket is at the top.
3)
Plug the Ethernet cable into the top of the splitter unit.
4)
Plug the captive Ethernet cable and the power cable from the splitter unit into the
AP.
5)
Mount the AP onto the 2 screws that are already fixed onto the splitter unit.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
nano3G AP Hardware Installation
Page 66
6.3
nano3G S16 AP Hardware Installation
6.3.1
Unpack the nano3G S16 AP
1)
Unpack the nano3G S16 AP and its accessories.
Box contents may vary, but typically the box should contain the following:
• nano3G S16 AP unit
• nano3G S16 AP stand
Plus any combination of the following items, according to the options ordered:
• Mains adaptor unit
• POE injector unit and suitable mains cable
• POE splitter unit
Note:
No screws are supplied to mount the AP or the splitter unit.
2)
Check that the serial number on the nano3G S16 AP unit matches the label on the
box.
3)
Check that the items have not been damaged in transit.
For any damaged units, contact the supplier immediately for returns advice.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
nano3G AP Hardware Installation
Page 67
6.3.2
Commission the nano3G S16 AP
Configure the AP so that it will connect to its serving NOS Server. If this has not been done
already, do this now, before installing the AP in its final location. For instructions, see
section 5.
6.3.3
Cable Connections
Use one of the cable connection schemes described below, to provide power and the LAN
connection.
Supplied PSU and LAN
S8
AP
Mains
Input
9V DC
cable to AP
Supplied
PSU
Backhaul
Network to AC
LAN Cable to
nearest switch/gateway
(max 100m)
When the supplied PSU is used to power the AP, the POE injector and splitter units are not
needed. However, this means that the mains socket providing power to the AP must be
within reach of the cabling included with the supplied PSU (less than 2m).
POE Injector and Splitter
S8
AP
9V DC
cable to AP
(100mm)
Mains Input
POE
Splitter
Injector
LAN cable
(100mm)
LAN Cable
to nearest
switch/gateway
Backhaul
Network to AC
Maximum total cable length
between nearest switch/gateway and AP is 100m
This improves flexibility for locating the AP, as the AP can be up to approximately 100m
from a mains power supply, depending on the placement of the POE Injector.
In this case, the PSU for the AP is not used. The injector takes a direct mains input using
the supplied mains cable.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
nano3G AP Hardware Installation
Page 68
POE Switch and Splitter
S8
AP
Mains Input
POE
Switch
POE
(max 99.8m)
9V DC
cable to AP
(100mm)
Splitter
LAN cable
(100mm)
LAN
cable
Backhaul
Network to AC
In this case, the POE switch is a third-party item. This has similar benefits to using the POE
injector, but a POE switch will typically only be used if there are multiple APs on site and/or
there is other equipment that can take advantage of POE. The supplied POE splitter must
be used with the AP.
Notice that the POE cable to the splitter should not exceed 99.8m in length. This will ensure
that the total cable run from the POE switch to the AP is within the Ethernet limit of 100m.
6.3.4
Note:
Mount the nano3G S16 AP
The nano3G S16 AP should be installed in a position so that it is at least 2m away from the
area where handsets are normally used.
The nano3G S16 AP must be mounted vertically in a location that allows air circulation
around the unit. The AP can be mounted in the following ways:
• On a stand
• Directly onto the wall at or above head height
• Onto the splitter unit on the wall at or above head height
The nano3G S16 AP has two holes at the back for direct wall mounting or mounting on the
POE splitter:
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
nano3G AP Hardware Installation
Page 69
Mount the nano3G S16 AP on a Stand
1)
Plug the Ethernet cable and the power cable into the AP or plug the cables from
the POE splitter into the AP.
2)
Slide the AP onto the stand.
3)
Place the AP on its stand on a stable flat surface.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
nano3G AP Hardware Installation
Page 70
Mount the nano3G S16 AP directly onto the wall
1)
Drill two holes 70mm (2.76in) apart vertically for the two screws.
2)
Insert wall plugs (if required) and secure the screws leaving approximately 3mm
(0.12in) clearance between the screw heads and the wall.
3)
Plug the Ethernet cable and the power cable into the AP.
Note:
4)
If using the POE splitter when wall mounting the AP, it is recommended to
mount the AP directly on the POE splitter, as in the following section. In
some cases, it may be necessary to mount the AP and the POE splitter on
the wall separately to minimise how far the AP projects from the wall. In
this case, position the POE splitter below the AP where the 100mm
cables will reach the AP.
Slide the AP onto the 2 screws.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
nano3G AP Hardware Installation
Page 71
Mount the nano3G S16 AP onto the splitter unit on the wall
1)
Drill two holes 66mm (2.6in) apart horizontally for the two screws.
2)
Secure the splitter unit to the wall using two screws.
Ensure that the Ethernet socket is at the top.
3)
Plug the Ethernet cable into the top of the splitter unit.
4)
Plug the captive Ethernet cable and the power cable from the splitter unit into the
AP.
5)
Mount the AP onto the 2 screws that are already fixed onto the splitter unit.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
nano3G AP Hardware Installation
Page 72
6.4
nano3G E8 AP and E16 AP Hardware Installation
6.4.1
Unpack the nano3G E8 AP or E16 AP
1)
Unpack the AP and its accessories.
Box contents may vary, but typically the box should contain the following:
• nano3G E8 AP or E16 AP unit with wall bracket attached
• Extraction tool for removing the AP from its wall bracket
• Injector unit for POE+
• Mains cable for the POE+ injector
2)
Check that the serial number on the AP unit matches the label on the box.
3)
Check that the items have not been damaged in transit.
For any damaged units, contact the supplier immediately for returns advice.
6.4.2
Removable Cable and Antenna Covers
The nano3G E8 AP and E16 AP have two removable covers. The top cover goes over the
antennae, and the bottom cover goes over the cable sockets.
1)
Place the unit on a flat surface.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
nano3G AP Hardware Installation
Page 73
6.4.3
2)
Press the sides of the unit next to the cover to be removed. Do not apply excessive
force.
3)
Slide the cover off.
4)
To refit the cover, simply slide it back onto the tabs on the main cover until it snaps
into place.
Antennas
The antennas must be oriented perpendicular to the unit, as shown, so that the cover fits
correctly without stressing the connectors.
To fit external antennas, first remove the plastic cover from the antenna side of the unit.
Unscrew the antennas to expose the SMA connectors. Connect external antennas directly
to the SMA connectors. Route the cables out of the way of the antenna cover, then refit the
cover.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
nano3G AP Hardware Installation
Page 74
6.4.4
Commission the AP
Configure the AP so that it will connect to its serving NOS Server. If this has not been done
already, do this now, before installing the AP in its final location. For instructions, see
section 5.
6.4.5
Cable Connections
Two power supply modules are available from ip.access, designed for use with the
ip.access nano3G E8 AP and E16 AP, that are compliant with the IEEE 802.3at standard:
• The POE+ injector, as supplied, is commonly used for single site installations
• Direct power from the mains via an optional power adapter
POE+ Injector
E8/E16
AP
Mains Input
POE+
Injector
LAN Cable
to nearest
switch/gateway
Backhaul
Network to AC
Maximum total cable length
between nearest switch/gateway and AP is 100m
The AP can be up to 100m from the switch/gateway to the backhaul, but allow
approximately 0.1m for routing through the injector. The injector can be positioned
anywhere on this cable run. Hence the injector can be at the most convenient point for
providing power, without restricting the location of the AP.
The injector takes a direct mains input using the supplied mains cable. Use a CAT5
Ethernet cable that is capable of carrying POE from the injector to the AP.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
nano3G AP Hardware Installation
Page 75
POE+ Switch
E8/E16
AP
Mains Input
POE+
Switch
POE+
(max 100m)
LAN
cable
Backhaul
Network to AC
In this case, the POE+ switch is a third-party item. The cable run from the switch to the AP
can be a full 100m.
A POE+ switch will typically only be used if there are multiple APs on site and/or there is
other equipment that can take advantage of POE+.
PSU and LAN
E8/E16
AP
Mains
Input
Backhaul
Network to AC
12V DC
cable to AP
LAN Cable to
nearest switch/gateway
(max 100m)
When a suitable PSU is used to power the AP (see section 2.5.1) the POE+ injector unit is
not needed. However, this means that a mains socket providing power to the AP must be
within reach of the cabling included with the PSU. This is typically less than 2m. The PSU
for the E8 AP or E16 AP is an optional extra.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
nano3G AP Hardware Installation
Page 76
6.4.6
Note:
Mount the nano3G E8 AP or E16 AP on a Wall
The nano3G E8 AP or E16 AP should be installed in a position so that it is at least 2m away
from the area where handsets are normally used.
The nano3G E8 AP and E16 AP must be mounted vertically to ensure air circulation around
the unit.
The location of each nano3G E8 AP and E16 AP should be shown on an installation floor
plan produced at the network planning stage. For example, it must take into account that all
APs must be at least 2m from any mobile equipment. The network wiring must be complete
before the nano3G E8 AP or E16 AP can be installed and commissioned. The nano3G E8
AP and E16 AP should be placed on a wall at or above head height.
1)
Remove the nano3G E8 AP or E16 AP from the wall bracket. Lay the AP on a flat
surface with the wall bracket upwards. Slide the removal tool over the central fin
between the bracket and the body of the unit to disengage the locking spring, then
slide the bracket to separate it from the AP. The removal tool may be inserted from
the top or bottom of the AP.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
nano3G AP Hardware Installation
Page 77
2)
Position the bracket on the wall with its flat surface against the wall and the clip
part towards the top. Ensure the bracket is level and sufficient clearance is
maintained to allow the AP to be fitted to the bracket. Allow at least 100mm from
the bracket to the top of wall, and 120mm from the side of the bracket to a side
wall.
3)
Mark the position of the four screw holes.
4)
Drill the four holes in the positions marked previously and insert wall plugs (if
required) and fix the mounting bracket securely to the wall. The bracket is
designed to allow the nano3G E8 AP or E16 AP unit to be mounted with the
connections either at the top or at the bottom of the unit.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
nano3G AP Hardware Installation
Page 78
5)
Slide the nano3G E8 AP or E16 AP onto the bracket and ensure that the retaining
spring engages into the indent at the rear of the unit.
6)
Remove the lower cover to reveal the cable ports and LEDs.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
nano3G AP Hardware Installation
Page 79
7)
Plug in the required cables. Either:
• Plug an Ethernet cable from the POE+ injector or POE+ switch into LAN1
or
• Plug an Ethernet cable from a switch/gateway (no POE+) into LAN1 and an
optional power supply into the +12V DC input
3G Service
Status LED
Reset
Button
Power Status
LED
Note:
8)
LAN1 Connection
and POE+ Input
DC Power
Input
2G Link
Do not connect an Ethernet cable to LAN2. This will have no effect.
To refit the lower cover, slide it onto the tabs on the main cover until it snaps into
place.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
nano3G AP Hardware Installation
Page 80
7
Finalize Installation
All the activities in this section are managed from the NOS Client.
7.1
Check and Upgrade the nano3G AP Software Image
This is a useful check to ensure that the AP has the required software version, even if the
AP software was recently updated during commissioning.
7.1.1
Check the Current Software Image Version
1)
Login to the NOS Client with a user name (and password) that has Full Access
rights for changing the AP's configuration.
2)
Find the required AP within the AP area. Find the AC the AP is connected to (i.e.
the BSMIS APs Per AC object) then locate the AP within its Site.
Hence, drill down to the AP like this:
Root > APs > BSMIS APs Per AC > Site > AP
Note:
For full information on using the NOS Client, see [OPM_415].
3)
Verify that the Site has a green tick, to show that the AP is connected to the NOS
Server. The AP object, below the Site, may be currently locked. The AP will remain
locked if it is not ready to provide service.
4)
In the Navigation pane, browse to the AP Admin Package.
5)
Check the values of the Active SW Version and Standby SW Version attributes.
6)
If the AP does not have the latest software image, download it to the AP from the
NOS Server according to the instructions in section 7.1.2.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Finalize Installation
Page 81
7.1.2
Download the Latest Software Image from the NOS Server to the
AP
For instructions about how the software images (SDP files) are uploaded to the NOS
Server, see [OPM_440].
1)
Select the AP in the NOS Client.
2)
Right-click the AP, select Actions and then Perform Software Download. The
Perform Software Download Actions dialogue box will appear.
3)
Change the SW Download Operations to Download, Swap and Reboot.
4)
Click in the SW Image Download URL box and enter the URL of the required SDP
file using the following URL pattern:
http:///download/sw/.sdp
Where  is the IP address or host name of the required NOS Server, and
.sdp is the required software download package file.
5)
Press  or  to set the URL.
6)
Click Finish and the download will take place. On the AP, download progress is
indicated by the flashing network LED. When the download is complete, the AP will
reboot under the new software. This may take several minutes.
7)
Wait for the AP to be shown as connected to the NOS.
8)
Select the 3G AP Admin Package for the AP object and verify that the Filesys
version reported by the Active Software Version matches the SDP file that was
downloaded.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Finalize Installation
Page 82
7.2
Finalize Configuration
7.2.1
Final Attribute Changes and Checks
1)
Login to the NOS Client with a user name that has Full Access to the required AP.
2)
Make any AP-specific configuration changes that have not already been applied by
the Create Site Wizard or loading configuration files. In particular, ensure the static
neighbour lists are correctly configured. See [OPM_300] for information on
neighbour list configuration.
3)
Spot check any or all of the following packages to verify the attributes are set to the
correct values:
• Cell Package
• NAS Package
• Location Package
7.2.2
Automatic Stored Configurations
This feature provides storage of a number of previous configurations for a collection of
managed objects and provides a command whereby a user can revert the configuration of
some of the system to a selected stored configuration. Each stored configuration is
identified by:
• The name of the user who made the changes represented by the stored
configuration
• The Date and Time (start and stop timestamps) during which the changes
represented by the stored configuration were made
• A description, generated automatically but which can be edited by the user, which
provides information about how or why this set of changes were made
A stored configuration contains information about what changes need to be made to a
managed object sub-tree in order to return its configuration to what it was at a particular
point in time.
The first time any managed Object is created, there is no configuration stored. Only when
the Managed Object has changes applied will the configuration first store the original
configuration and also the changed configuration. For each Managed Object there isa
maximum number of stored configurations that can be stored. This number can vary
depending on the Managed Object. To find out how many stored configurations a Managed
Object is allowed, look in the Stored Configurations Package Attribute for a specific
Managed Object.
When a stored configuration maximum has been reached the oldest stored configuration
will be deleted to make way for the newly stored configuration of a Managed Object.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Finalize Installation
Page 83
Modified Stored Configuration Attributes
1)
Select the Stored Configurations object under Network Orchestration System
node. The attributes for this Managed Object are displayed in the properties pane:
2)
Select the Stored Configuration Package.
3)
Edit the attributes of the Stored Configuration Package. The configurable
attributes of this managed object are:
4)
Configuration Timeout
This attribute specifies in hours how long a
gap between two amendments to the same
managed object or group of objects counts
as long enough that the later modification
creates a new stored configuration
Maximum Number of Configurations
Specifies the maximum number of stored
configurations that will be kept for each
managed object or group of objects for
which configuration Rollback is possible
Click Apply to save the changes, click Cancel to abandon any changes.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Finalize Installation
Page 84
7.2.3
Network Listen and Frequency Correction
1)
If not already logged in, login to the NOS Client with a user name that has Full
Access to the required AP.
2)
Select the AP object within the managing AP Management Service, AC Detail and
Site. Select its 3GAP Time package, then wait a few seconds for the Up Time
attribute to update. Verify that this is at least 1200, which is 20mins, before
continuing. This ensures the frequency crystal has had some time to warm up and
achieve a degree of thermal stability prior to checking if it needs any frequency
correction. If necessary, wait until the Up Time passes 1200 seconds.
3)
An AP must be locked to execute a Network Listen scan. Right-click the AP object
and select Lock, then wait until a small padlock symbol is shown against the AP
icon.
4)
To execute a Network Listen scan, right-click the AP object, select Actions and
then select Start Sequential NWL Scan.
5)
When the scan is complete, view the results and verify there is some radio activity
detected, and ideally some neighbour cells. This will confirm the radio is working.
6)
Only if a suitable macro neighbour has been detected, a correction can be applied
to ensure that the oscillator frequency is correct. Select Actions and then select
Apply Frequency Correction.
Note:
7.3
Assuming there is a suitable macro neighbour, this should be repeated
approximately 24 hours after the AP is brought into service. This will allow
time for the oscillator crystal to stabilize, at which time the frequency
correction should be re-applied.
Bring the AP into Service
Once the AP has the latest software image, any additional configuration is complete and
any frequency correction has been applied, it is ready for service.
In most cases, a correctly pre-provisioned AP will start providing service once it has
obtained its configuration from the NOS Server. These steps are only necessary when an
AP is not yet enabled for service, or has been locked to apply additional configuration. An
AP that is administratively Locked will have a small padlock symbol next to the AP icon.
1)
To bring the AP into service, right-click the 3G AP object in the NOS Client and
select Unlock. The padlock symbol next to the 3G AP icon will be removed.
2)
If the installation engineer is still on site, the engineer should make CS and PS test
calls to verify the AP is providing service.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Finalize Installation
Page 85
7.4
Disable Web Interface from NOS
From the NOS it is possible to disable and re-enable the APs web interface. This setting is
preserved across a Factory Restore.
Use the following flag in AP_Diag Tuning for this purpose:
• WEBIF_CTRL_PERMANENT_DISABLED_CMD = 1 will disable it
• WEBIF_CTRL_PERMANENT_DISABLED_CMD = 0 will re-enable it
1)
Login to the NOS Client with a user ID that has Full Access rights to the required
AP.
2)
Find the required AP within the APs under BSMIS APs Per AC.
Hence, drill down to the AP like this:
Root > APs > BSMIS APs Per AC > Site > relevant AP
3)
In the Navigation Pane, select the 3G AP Diagnostics Package and drill down into
the Diagnostic Tuning attribute.
4)
Click the + button under the Attribute pane to add a new instance to the Diagnostic
Tuning list.
5)
Drill down into the new instance.
6)
In the Name, enter:
WEBIF_CTRL_PERMANENT_DISABLED_CMD
This must be entered exactly as shown. If there is any variation, this will not have
the desired effect.
7)
In the Value, enter 1 to disable the web interface:
For example:
Note:
8)
To re-enable to web interface, change the Value to 0.
Click Apply to save the changes.
If the Apply button is not available, use the TAB key to exit field entry first.
9)
Right-click the AP object and select Reinitialise. This restarts the AP so that it uses
the configuration change.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Finalize Installation
Page 86
8
Troubleshooting
This section covers the following topics that may be useful for troubleshooting APs during
installation and commissioning:
• 8.1 LED Status Indicators
• 8.2 nano3G E8 AP or E16 AP Does Not Start Up
• 8.3 Factory Reset
• 8.4 Options for a Low Bandwidth Connection
For more information on AP troubleshooting, see [TRB_300].
8.1
LED Status Indicators
8.1.1
nano3G E8 AP and nano3G E16 AP LEDs
The following table shows the meaning of the status indicators under normal and fault
conditions.
3G
Off
The AP is not provisioned, it has no IP address. This may be a
temporary condition when the AP is switched on for the first time, or
after factory reset.
Green
The AP is provisioned and unlocked, it is connected to the AC and is
providing service.
Flashing green
(evenly, slowly)
The AP is provisioned but has lost connection to the AC, for example
because the AC is not available or there is a DNS problem.
The AP is locked.
Flashing green
(evenly, fast)
The AP has been reinitialized (the reset button was pressed but for
less than 5 seconds).
Off, with short
green blinks on
Factory reset is in progress in the AP (the reset button was pressed
for more than 5 seconds).
On, with short
green blinks off
Software download is in progress to the AP.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Troubleshooting
Page 87
Power
8.1.2
Off
The AP is not switched on.
Green
The AP is powered up normally.
Flashing green
Self-test is running.
Red
There is a fault with the AP.
Ethernet
Link
Amber
This is on to show the link is active, or flashes when there is network
activity.
Ethernet
Speed
Green
Shows the network speed. On for 100Mbps or off for 10Mbps.
nano3G S8 AP LEDs
The following table shows the meaning of the status LEDs under normal and fault
conditions.
Power
Off
The nano3G AP is not switched on.
Green
The nano3G AP is powered up normally.
Flashing green
Self-test is running.
Red
There is a fault with the nano3G AP.
Off
Unable to detect a network. This is usually because there is no
network cable connected, or there is no network connection at the
other end of the cable (for example, the router or broadband modem
may have failed).
Green
The 100Mbps connection is OK.
Flashing green
Indicates activity on the network at 100Mbps speed (that is, the
nano3G AP is sending and/or receiving data across the LAN).
Amber
The 10Mbps connection is OK.
Flashing amber
Indicates activity on the network at 10Mbps speed (that is, the
nano3G AP is sending and/or receiving data across the LAN).
Off
The nano3G AP is not provisioned, it has no IP address. This may be
a temporary condition when the AP is switched on for the first time, or
after factory reset.
Green
The nano3G AP is provisioned and unlocked, it is connected to the
AP and is providing service.
Flashing green
(evenly, slowly)
The nano3G AP is provisioned but has lost connection to the AC, for
example because the AC is not available or there is a DNS problem.
Flashing green
(evenly, fast)
The nano3G AP has been reinitialized (the reset button was pressed
but for less than 5 seconds).
Network
Service
Off, with a short The nano3G AP is administratively Locked.
green blink every
3 seconds
Off, with short
green blinks on
Factory reset is in progress in the nano3G AP (the reset button was
pressed for more than 5 seconds).
On, with short
green blinks off
Software download is in progress to the nano3G AP.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Troubleshooting
Page 88
8.1.3
nano3G S16 AP LEDs
The following table shows the meaning of the status LEDs under normal and fault
conditions.
Power
Off
The nano3G AP is not switched on.
Green
The nano3G AP is powered up normally.
Flashing green
Self-test is running.
Red
There is a fault with the nano3G AP.
Off
Unable to detect a network. This is usually because there is no
network cable connected, or there is no network connection at the
other end of the cable (for example, the router or broadband modem
may have failed).
Green
The network connection is OK.
Flashing green
Indicates activity on the network (that is, the nano3G AP is sending
and/or receiving data across the LAN).
Off
The nano3G AP is not provisioned, it has no IP address. This may be
a temporary condition when the AP is switched on for the first time, or
after factory reset.
Green
The nano3G AP is provisioned and unlocked, it is connected to the
AP and is providing service.
Flashing green
(evenly, slowly)
The nano3G AP is provisioned but has lost connection to the AC, for
example because the AC is not available or there is a DNS problem.
Flashing green
(evenly, fast)
The nano3G AP has been reinitialized (the reset button was pressed
but for less than 5 seconds).
Network
Service
Off, with a short The nano3G AP is administratively Locked.
green blink every
3 seconds
8.2
Off, with short
green blinks on
Factory reset is in progress in the nano3G AP (the reset button was
pressed for more than 5 seconds).
On, with short
green blinks off
Software download is in progress to the nano3G AP.
nano3G E8 AP or E16 AP Does Not Start Up
Check the following:
• Check the power-over-Ethernet inserter: it must be a POE+ unit.
• Verify the Ethernet cable from the POE+ inserter is plugged into the correct socket
(LAN1).
• If using a DC power supply instead of POE+, verify the power supply is a 12V
supply with the correct polarity.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Troubleshooting
Page 89
8.3
Factory Reset
A factory reset will delete an AP’s configuration except for the default set of these five
parameters, as set on the AP’s commissioning web page:
• Management Server URL, which is the address of the default SCP server
• NTP server address
• IPsec enabled or disabled
• Security Gateway address (only relevant when IPsec is enabled)
• Remote traffic selector address and netmask (only relevant when IPsec is
enabled)
Therefore, executing a factory reset will mean that the AP will reconnect to the servers
currently specified on the commissioning web page. If any of these servers are no longer
valid, for example something has been decommissioned, the AP may be unable to re-enter
service automatically after a factory reset. If it necessary to change any of these settings,
physical access to the AP is required, so that it can be connected to a commissioning
terminal.
Note:
If the reset button is released before the factory reset starts, the AP will reboot. It will not
return to the factory reset state.
Note:
If the AP has been disabled as in section 7.4. It will not be possible to recommission the AP.
The AP will reconnect to the servers currently specified on the commissioning web page.
8.3.1
nano3G S8 AP Factory Reset
1)
Use a thin rod to press and hold the reset button.
2)
Keep the reset button pressed until the Service LED changes from blinking fast
(50ms on, 50ms off) to blinking slowly (200ms on, 200ms off).
The Service LED blinks fast (50ms on, 50ms off) until the factory reset
commences, then it blinks slowly (200ms on, 200ms off). When the factory restore
process is complete, the LED extinguishes and the AP automatically reboots,
takes the fixed IP address and enables the web interface for commissioning.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Troubleshooting
Page 90
8.3.2
3)
If required, use a connected commissioning terminal to login to the AP’s web
interface. The login to the web interface is only available for 60 seconds. If the AP
times out, it will boot up using the default set of parameters, as per the current
entries on the commissioning web page.
4)
See section 5 for the commissioning procedure.
nano3G S16 AP Factory Reset
1)
Use a thin rod to press and hold the reset button.
2)
Keep the reset button pressed until the Service LED changes from blinking fast
(50ms on, 50ms off) to blinking slowly (200ms on, 200ms off).
The Service LED blinks fast (50ms on, 50ms off) until the factory reset
commences, then it blinks slowly (200ms on, 200ms off). When the factory restore
process is complete, the LED extinguishes and the AP automatically reboots,
takes the fixed IP address and enables the web interface for commissioning.
3)
If required, use a connected commissioning terminal to login to the AP’s web
interface. The login to the web interface is only available for 60 seconds. If the AP
times out, it will boot up using the default set of parameters, as per the current
entries on the commissioning web page.
4)
See section 5 for the commissioning procedure.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Troubleshooting
Page 91
8.3.3
nano3G E8 AP and nano3G E16 AP Factory Reset
1)
Use a thin rod to press and hold the reset button.
2)
Keep the reset button pressed until the 3G LED changes from blinking fast (50ms
on, 50ms off) to blinking slowly (200ms on, 200ms off).
The 3G LED blinks fast (50ms on, 50ms off) until the factory reset commences,
then it blinks slowly (200ms on, 200ms off). When the factory restore process is
complete, the LED extinguishes and the AP automatically reboots, takes the fixed
IP address and enables the web interface for commissioning.
3)
If required, use a connected commissioning terminal to login to the AP’s web
interface. The login to the web interface is only available for 60 seconds. If the AP
times out, it will boot up using the default set of parameters, as per the current
entries on the commissioning web page.
4)
See section 5 for the commissioning procedure.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Troubleshooting
Page 92
8.4
Options for a Low Bandwidth Connection
8.4.1
N User Configuration
It may be useful to reduce the number of active UEs on an AP when an AP has a backhaul
link with limited bandwidth. N-User Configuration allows for a reduction in the maximum
number of active UEs on a nano3G AP by controlling how many CELL_DCH users are
allowed on an AP.The maxNumCellDchEues attribute reports the hardware capability of an
AP.
Below is a table with minimum bandwidth required to support a specific number of DCH
UEs and vice versa. If the AP is configured to support a specific number of UEs in DCH
then bandwidth limits should be set accordingly (AP will ignore bandwidth settings if it is
lower than dictated by the DCH UE number)
Each reduction in max users will reduce the max requirement for CS by 65Kbps in DL and
20Kbps in UL.
DCH Ues
Downlink
Backhaul Bit
Rate (Kbps)
Uplink Backhaul Bit
Rate (Kbps)
80
80
98
142
117
205
137
269
157
334
177
397
197
462
217
525
237
589
257
654
10
277
717
11
297
782
12
317
845
13
337
909
14
357
974
15
377
1037
16
397
1102
There is no effect if the override value in maxNumCellDchUesOverride is equal or greater
than the hardware capability.
1)
Log into the NOS Client and find the AP. The user ID must have Full Access rights
to the AP.
Hence find, Root > APs > BSMIS APs Per AC > Site > relevant AP.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Troubleshooting
Page 93
8.4.2
2)
Select Admission Control Package from the Navigation Pane.
3)
Select the attribute maxNumCellDchUesOverride and set to the relevant value.
4)
Click Apply to save changes.
Dynamic Backhaul Management (DBM)
The DBM feature addresses the need to make optimal usage of backhaul bandwidth in
scenarios where backhaul bandwidth is limited.
Note:
Where a nano3G AP is deployed without IPsec enabled and the Backhaul ISP or other
routers between the nano3G AC and the AP are aeroing out DSCP marking applied by the
AC on the downlink, then the DBM feature on the DL should NOT be enabled. This only
affects the DL as the AP does not control DL DSCP marking.
Note:
On the UL the AP is the source of the packets. Hence, prioritisation and bandwidth limiting
occurs before DSCP marks are zeroed out by routers or ISPs.
Note:
Where APs use IPsec, the AP will inspect the inner packet, which should not have its DSCP
mark removed, and should continue to function with the DBM DL limit applied.
To set a limit on total AP bandwidth usage of the backhaul and prioritise CS voice traffic to
ensure that voice quality is maintained, do the following:
1)
Log into the NOS Client and find the AP. The user ID must have Full Access rights
to the AP.
Hence find, Root > APs > BSMIS APs Per AC > Site > relevant AP.
2)
Select 3G AP Load Control Package from the Navigation Pane.
3)
Select the attribute max Downlink Backhaul Bit Rate (Kbps) and set to the relevant
value.
4)
Select the attribute max Uplink Backhaul Bit Rate (Kbps) and set to the relevant
value.
5)
Click Apply to save changes.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
Troubleshooting
Page 94
9
nano3G AP and PSU Regulatory Information
This chapter provides the customer with safety and regulatory warnings, cautions and
information for the ip.access Ltd range of products.
9.1
Warnings and Cautions
Electrical Safety
CAUTION
The nano3G AP is intended for dry indoor applications only. If evidence of
condensation is present do not apply power to the nano3G AP.
CAUTION
The nano3G AP is designed to be operated as a fixed system device and must be
located away from the user. It must be mounted in a manner to ensure that all
users and bystanders are kept a minimum of 20cm away from the integral
antennas at all times.
WARNING
Do not immerse any part of the nano3G AP or its power supply in water or any
other liquid. Do not install or use the nano3G AP or its power supply near open
water. Do not spill liquids of any type on the nano3G AP or its power supply.
WARNING
Do not use liquid, solvent or aerosol cleaning agents on or near the nano3G AP or
its power supply.
CAUTION
To avoid the risk of fire and/or electrical shock, do not push objects through
openings into the nano3G AP or its power supply (except when operating the
Reset switch on the nano3G AP).
CAUTION
Do not disassemble the nano3G AP or its power supply.
CAUTION
The nano3G AP must only be powered using the ip.access power supply provided
for use with the nano3G AP.
CAUTION
Before using the power supply, verify that the mains voltage is within the range
specified by the voltage printed on the power supply.
CAUTION
The PSU supplied with the nano3G AP must not be used for powering any other
equipment.
CAUTION
To avoid the risk of fire and/or electrical shock, do not overload power outlets or
extension cables.
CAUTION
When disconnecting the power supply from the mains, pull the plug. Pulling the
cable may result in damage to the cable.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
nano3G AP and PSU Regulatory Information
Page 95
Interference with Electronic Devices
CAUTION
If using a pacemaker, ensure you are using the device in accordance with its
safety requirements with respect to RF devices. Consult your doctor if you have
questions about RF signals and your pacemaker.
CAUTION
If using a hearing aid, RF devices may cause interference.
CAUTION
Unshielded electronic devices should not be used near the nano3G AP.
Conversely, the nano3G AP should not be installed adjacent to unshielded
electrical or electronic devices (such as unshielded speakers).
Other Warnings and Cautions
WARNING
Do not install the nano3G AP in a position where the power supply cable or
network cable may cause a tripping or choking hazard.
WARNING
Do not install the nano3G AP or the power supply on an unstable surface. All
caution must be observed to prevent the device from falling and causing injury to
a person and/or damage to the device.
WARNING
The nano3G AP should not be disposed of in household waste bins. Please follow
local regulations for disposal of electronic devices.
CAUTION
Do not install the nano3G AP in a position where the power supply cable or
network cable may be damaged by walking on the cables.
CAUTION
Do not attempt to fit an external antenna or antenna cabling to the nano3G S8 AP.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
nano3G AP and PSU Regulatory Information
Page 96
9.2
Regulatory Statements for nano3G S8 AP
9.2.1
US FCC Compliance
• FCC CFR47 Part 15B: Variants 237B, BA, C, CA
• FCC CFR47 Parts 22, 24: Variants 237B, BA
• FCC CFR47 Part 27: Variants 237C, CA
Note:
Changes or modifications not expressly approved by the party responsible for compliance
may void the user's authority to operate this equipment.
The FCC IDs for nano3G S8 AP model variants are:
Model
FCC ID
nano3G 237B
QGGIPA237B
nano3G 237BA
QGGIPA237BA
nano3G 237C
QGGIPA237C
nano3G 237CA
QGGIPA237CA
WARNING
This is a class B product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
Note:
9.2.2
This equipment has been tested and found to comply with the limits for a class B digital
device, pursuant to part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
EU Regulatory Compliance
Models nano3G 237A and 237AA conform to the following regulatory standards:
Health (Art 3.1(a)):
EN50385: 2002
Safety (Art 3.1(a)):
EN60950-1: 2006
EMC (Art 3.1(b)):
EN 301 489-23 V1.3.1, EN 301 489-1 V1.8.1
Spectrum (Art 3.2):
EN 301 908-1 V4.2.1, EN 301 908-3 V4.2.1
This product is intended for use in all
Member States of the European Union.
"Hereby, ip.access Ltd, declares that this nano3G S8 AP is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC."
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
nano3G AP and PSU Regulatory Information
Page 97
A copy of regulatory compliance documentation may be obtained in writing from "IP Access
Ltd, Building 2020, Cambourne Business Park, Cambourne, Cambridge, CB23 6DW, UK".
9.2.3
Safety Standards
• IEC 60950-1:2005 (2nd Edition), EN 60950-1:2006 and UL60950-1:2007
The power adapter, as well as the POE inserter and splitter supplied by ip.access comply
with LPS requirements in accordance with IEC/EN 60950-1.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
nano3G AP and PSU Regulatory Information
Page 98
9.3
Regulatory Statements for nano3G E8 AP
9.3.1
US FCC Compliance
• FCC CFR47 Parts 15B, 27
Note:
Changes or modifications not expressly approved by the party responsible for compliance
may void the user's authority to operate this equipment.
Model nano3G 217C has FCC ID QGGIPA217C
WARNING
This is a class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
Note:
9.3.2
This equipment has been tested and found to comply with the limits for a class A digital
device, pursuant to part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
EU Regulatory Compliance
Model nano3G 217A conforms to the following regulatory standards:
Health (Art 3.1(a)):
EN50385: 2002
Safety (Art 3.1(a)):
EN60950-1: 2006
EMC (Art 3.1(b)):
EN 301 489-23 V1.3.1, EN 301 489-1 V1.8.1
Spectrum (Art 3.2):
EN 301 908-1 V4.2.1, EN 301 908-3 V3.2.1
This product is intended for use in all
Member States of the European Union.
"Hereby, ip.access Ltd, declares that this nano3G E8 AP is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC."
A copy of regulatory compliance documentation may be obtained in writing from "IP Access
Ltd, Building 2020, Cambourne Business Park, Cambourne, Cambridge, CB23 6DW, UK".
9.3.3
Safety Standards
• IEC 60950-1:2005 (2nd Edition) and EN 60950-1:2006
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
nano3G AP and PSU Regulatory Information
Page 99
The POE+ inserter supplied by ip.access complies with LPS requirements in accordance
with IEC/EN 60950-1.
9.3.4
Environmental Standards
• ETSI 300 019-2-3
• ETSI 300 019-2-2
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
nano3G AP and PSU Regulatory Information
Page 100
9.4
Regulatory Statements for nano3G S16 AP
9.4.1
US FCC Compliance
• FCC CFR47 Part 15B: Variants 237B, BA
• FCC CFR47 Parts 22, 24: Variants 237B, BA
Note:
Changes or modifications not expressly approved by the party responsible for compliance
may void the user's authority to operate this equipment.
The FCC IDs for nano3G S16 AP model variants are:
Model
FCC ID
nano3G 243B
QGGIPA243B
nano3G 243BA
QGGIPA243BA
WARNING
This is a class B product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
Note:
This equipment has been tested and found to comply with the limits for a class B digital
device, pursuant to part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
nano3G AP and PSU Regulatory Information
Page 101
9.4.2
EU Regulatory Compliance
Models nano3G 243A and 243AA conform to the following regulatory standards:
Health (Art 3.1(a)):
EN50385: 2002
Safety (Art 3.1(a)):
EN60950-1: 2006
EMC (Art 3.1(b)):
EN 301 489-1 V1.8.1 (2008-04), EN 301 489-23
V1.5.1 (2011-11)
Spectrum (Art 3.2):
EN 301 908-3 V5.2.1 (2011-05), EN 301 908-1
V5.2.1 (2011-05)
This product is intended for use in all
Member States of the European Union.
"Hereby, ip.access Ltd, declares that this nano3G S16 AP is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC."
A copy of regulatory compliance documentation may be obtained in writing from "IP Access
Ltd, Building 2020, Cambourne Business Park, Cambourne, Cambridge, CB23 6DW, UK".
9.4.3
Safety Standards
• IEC 60950-1:2005 (2nd Edition), EN 60950-1:2006 and UL60950-1:2007
The power adapter, as well as the POE inserter and splitter supplied by ip.access comply
with LPS requirements in accordance with IEC/EN 60950-1.
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
nano3G AP and PSU Regulatory Information
Page 102
9.5
Regulatory Statements for nano3G E16 AP
9.5.1
US FCC Compliance
• FCC CFR47 Parts 15B, 27
Note:
Changes or modifications not expressly approved by the party responsible for compliance
may void the user's authority to operate this equipment.
Model nano3G 239B has FCC ID QGGIPA239B
Model nano3G 239C has FCC ID QGGIPA217C
WARNING
This is a class B product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
Note:
9.5.2
This equipment has been tested and found to comply with the limits for a class B digital
device, pursuant to part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
EU Regulatory Compliance
Model nano3G 239C conforms to the following regulatory standards:
Health (Art 3.1(a)):
EN50385: 2002
Safety (Art 3.1(a)):
EN60950-1: 2006 + A11:2009
EMC (Art 3.1(b)):
EN 301 489-23 V1.3.1, EN 301 489-1 V1.8.1
Spectrum (Art 3.2):
EN 301 908-1 V5.2.1, EN 301 908-3 V3.2.1
This product is intended for use in all
Member States of the European Union.
"Hereby, ip.access Ltd, declares that this nano3G E16 AP is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC."
A copy of regulatory compliance documentation may be obtained in writing from "IP Access
Ltd, Building 2020, Cambourne Business Park, Cambourne, Cambridge, CB23 6DW, UK".
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
nano3G AP and PSU Regulatory Information
Page 103
9.5.3
Safety Standards
• IEC 60950-1:2005 (2nd Edition) and EN 60950-1:2006
The POE+ inserter supplied by ip.access complies with LPS requirements in accordance
with IEC/EN 60950-1.
9.5.4
Environmental Standards
• ETSI 300 019-2-3
• ETSI 300 019-2-2
nano3G AP Installation Manual
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012
nano3G AP and PSU Regulatory Information
Page 104

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Language                        : en
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Creator Tool                    : FrameMaker 10.0
Modify Date                     : 2012:09:18 11:11:25+01:00
Create Date                     : 2012:09:18 10:07:36Z
Metadata Date                   : 2012:09:18 11:11:25+01:00
Format                          : application/pdf
Title                           : N3G_INST_300_AP_Install_v292_1.0.book
Creator                         : cfb
Producer                        : Acrobat Distiller 10.0.0 (Windows)
Document ID                     : uuid:094db48c-ac08-401b-8e48-9da5e128297d
Instance ID                     : uuid:84330102-944d-4366-ae2e-e7844f43b1b6
Page Layout                     : SinglePage
Page Mode                       : UseOutlines
Page Count                      : 111
Author                          : cfb

EXIF Metadata provided by EXIF.tools