ip access KU02ZZP GSM 1900 picocellular basestation User Manual Safety and regulatory sheet

ip.access ltd GSM 1900 picocellular basestation Safety and regulatory sheet

UserManual.wiki >

ip access >

KU02ZZP User Manual >

Safety and regulatory sheet HTML Version

1. Installation manual
2. Data sheet
3. Safety and regulatory sheet

Safety and regulatory sheet

COMPANY CONFIDENTIAL CENG0133_C_Customer_Safety_and

_Regulatory_Information.doc

- 1 -

Installation Guide

ip.access Ltd

Building 2020

Cambourne Business Park

Cambridge

CB3 6DW

United Kingdom

ip.access

Customer Safety and Regulatory

Information

Author(s)

Lance Davidson

26/10/2004

COMPANY CONFIDENTIAL CENG0133_C_Customer_Safety_and

_Regulatory_Information.doc

- 2 -



The information contained in this document is commercially

confidential and must not be disclosed to third parties without prior

consent.

COMPANY CONFIDENTIAL CENG0133_C_Customer_Safety_and

_Regulatory_Information.doc

- 3 -

1 REVISION HISTORY

Version Change Summary ECN Date Author

A First release 0190 Sept 2004 LED

B BSC notes updated 0243 Aug 2005 LED

C Product 165 Included, Cambourne address

updated TBA Dec 2005 LED

COMPANY CONFIDENTIAL CENG0133_C_Customer_Safety_and

_Regulatory_Information.doc

- 4 -

Contents

1 REVISION HISTORY ....................................................................................3

2 INTRODUCTION ...........................................................................................5

2.1 Purpose and Scope.................................................................................5

2.2 Related Documents.................................................................................5

2.3 Terminology.............................................................................................5

2.4 Change Control .......................................................................................5

2.5 Document Organisation...........................................................................5

3 Model 109 POWER SUPPLY .......................................................................6

3.1 109 - Handbook - Warnings and Cautions ..............................................6

3.2 109 - Handbook - FCC Text ...................................................................7

3.3 109 – Handbook - Industry Canada text..................................................7

3.4 109 – Handbook - Regulatory Compliance Statement ............................7

4 Model 126 Ethernet Switch and Power Inserter........................................9

4.1 126 - Handbook - Warnings and Cautions ..............................................9

4.2 126 – Handbook - FCC Text..................................................................10

4.3 126 – Handbook - Industry Canada text................................................11

4.4 126 – Handbook - Regulatory Compliance Statement ..........................11

5 NANOBTS Products ..................................................................................13

5.1 NanoBTS - Handbook - Warnings and Cautions...................................13

5.2 NanoBTS - Handbook - Parts required for each nanoBTS...................14

5.3 NanoBTS - Handbook - Provision of Power to the nanoBTS ................14

5.3.1 NanoBTS - Handbook - Installing the PSU at the Ethernet switch. .16

5.3.2 Nano - BTS Handbook - Installing the PSU at the nanoBTS...........16

5.4 NanoBTS - Handbook – FCC Text........................................................17

5.5 NanoBTS - Handbook – IC Text............................................................17

5.6 NanoBTS – Handbook - Regulatory Compliance Statement.................18

6 Model 129 BSC (Base Station Controller) ...............................................19

6.1 BSC – Handbook – Warnings and Cautions .........................................19

6.2 BSC – Handbook - FCC Text ................................................................21

6.3 BSC - Handbook - Industry Canada text ...............................................22

6.4 BSC - Handbook - Regulatory Compliance Statement..........................22

COMPANY CONFIDENTIAL CENG0133_C_Customer_Safety_and

_Regulatory_Information.doc

- 5 -

2 INTRODUCTION

2.1 Purpose and Scope

This document provides the customer with safety and regulatory warnings,

cautions and information for the IP Access range of products.

Products covered are the model 108, 110, 139, 140, 165 and 178 range of

nanoBTS’s, model 109 and 126 power supplies, model 129 4U circuit switched

BSC.

2.2 Related Documents

This document shall be referenced by the individual product’s user guides.

2.3 Terminology

UL Underwriters Laboratories

FCC Federal Communications Commission

ICE Industry Canada

CE European Union

2.4 Change Control

Changes to this document shall be agreed and implemented according to the

ECN procedures described within QS019, Approvals Liaison Engineer signature

is required in all cases.

2.5 Document Organisation

This document is divided into sections by product type.

COMPANY CONFIDENTIAL CENG0133_C_Customer_Safety_and

_Regulatory_Information.doc

- 6 -

3 Model 109 POWER SUPPLY

3.1 109 - Handbook - Warnings and Cautions

This document is written in English, please request a copy in your local

language if required.

This product is only intended to power products approved by IP Access.

Ensure that only IP Access products are connected to an Ethernet circuit

enabled for 48V operation, this also applies to outlets remote from the unit

For indoor use only, output cabling is SELV / LAN for indoor routing only.

Do not cover casing or otherwise impede cooling.

Do not apply power to unit if there is any evidence of condensation.

Do not open casing as mains voltages may be present within the unit.

90 to 264VAC input is via a 2 pin IEC C7 (figure 8) connector. Inlet cable

assembly must carry a suitable local approval (e.g. UL marked for US and

Canadian markets).

PSU109 – Environmental Specification

• -10 to +45 degrees Centigrade ambient operating temperature.

• This product has been Listed by UL for use in a 25 degree C ambient.

• -20 to +80 degrees C ambient storage temperature.

• 5 to 95% RH non condensing humidity.

COMPANY CONFIDENTIAL CENG0133_C_Customer_Safety_and

_Regulatory_Information.doc

- 7 -

3.2 109 - Handbook - FCC Text

3.3 109 – Handbook - Industry Canada text

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numériqué de la classe B est conformé à la norme NMB-003 du

Canada.

3.4 109 – Handbook - Regulatory Compliance Statement

EMC Standards

• EN 55022 and EN55024 (CE marked)

• FCC Part 15 class B

• ICES-003

WARNING

This is a class B product. In a domesti

c environment this product may cause

radio interference in which case the user may be required to take adequate

measures.

Federal Communications Commission

Note: This equipment has been tested and found to comply with the limits for

a class B digital device, pursuant to part 15 of the FCC rules. These limits are

designed to provide reasonable protection against harmful interference when

the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference in which case the user

will be required to correct the interference at his own expense.

COMPANY CONFIDENTIAL CENG0133_C_Customer_Safety_and

_Regulatory_Information.doc

- 8 -

Safety Standards

• EN60950 (CE marked)

• UL60950 Listed (File number E231617) (USA and Canada)

“Hereby, ip.access declares that this Ethernet Power Inserter is in

compliance with the essential requirements and other relevant provisions

of Directives 73/23/EEC and 89/336/EEC."

The PSU109 is supplied by Poly-Products Industries, model number

ILA1711112.

A copy of regulatory compliance documentation may be obtained in writing from

“IP access Ltd, Building 2020, Cambourne Business Park, Cambourne,

Cambridge, CB3 6DW, UK”.

COMPANY CONFIDENTIAL CENG0133_C_Customer_Safety_and

_Regulatory_Information.doc

- 9 -

4 Model 126 Ethernet Switch and Power Inserter

4.1 126 - Handbook - Warnings and Cautions

This document is written in English, please request a copy in your local

language if required.

This product is only intended to power products approved by IP Access.

Ensure that only IP Access approved products are connected to an

Ethernet circuit enabled for 48V operation, this also applies to outlets remote

from the unit.

To be located in a restricted access location only (accessible to

maintenance personnel only).

For indoor use only, output cabling is SELV / LAN for indoor routing only.

Do not block ventilation holes or otherwise impede cooling.

Refer to National Engineering Code (USA). Wiring methods must be in

accordance with NEC Article 300.

When rack mounting, secure via front panel plate with 4 bolts and ensure

that no additional load is placed upon the caseworks (e.g. heavy objects on top).

COMPANY CONFIDENTIAL CENG0133_C_Customer_Safety_and

_Regulatory_Information.doc

- 10 -

When rack mounting, ensure that the internal rack temperature does not

exceed the rating of this product.

Do not apply power to unit if there is any evidence of condensation.

Do not open casing as mains voltages may be present within the unit.

AC inlet cable must carry suitable local approval (e.g. UL marking for US

and Canadian markets).

126 - Input Power Source Specification

• Unit may be powered via AC or DC (not both).

• 90 to 132 and 180 to 264VAC (auto-ranging) via an IEC C13 connector.

135W, 2A rating.

• 47 to 57V DC via screw terminals on the front panel. 115W 3A rating. The

installer must ensure that this supply connection is fused externally at 5A

and provision is made for an external disconnection device.

• Appliance must be earthed, either via the mains connector (mains

operation) or screw terminal on the front panel (DC operation).

126 – Environmental Specification

• -5 to +45 degrees C ambient operating

• -20 to +80 degrees C ambient storage

• 5 to 95% RH non condensing

4.2 126 – Handbook - FCC Text



WARNING

This is a class A product. In a domestic environment this product may cause

radio interference in which case the user may be required to take adequate

measures.

COMPANY CONFIDENTIAL CENG0133_C_Customer_Safety_and

_Regulatory_Information.doc

- 11 -

4.3 126 – Handbook - Industry Canada text

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numériqué de la classe A est conformé à la norme NMB-003 du

Canada.

4.4 126 – Handbook - Regulatory Compliance Statement

The nanoBTS conforms to the following regulatory standards.

EMC Standards

• EN 55022 and EN55024 (CE marked)

• FCC Part 15 class A

• ICES-003

Safety Standards

• EN60950 (CE marked)

Federal Communications Commission

Note: This equipment has been tested and found to comply with the limits for

a class A digital device, pursuant to part 15 of the FCC rules. These limits are

designed to provide reasonable protection against harmful interference when

the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference in which case the user

will be required to correct the interference at his own expense.

COMPANY CONFIDENTIAL CENG0133_C_Customer_Safety_and

_Regulatory_Information.doc

- 12 -

• IEC 60950

• UL60950 Listed (File number E230296) (USA and Canada)

• CB certificate (DK-7033)

“Hereby, ip.access declares that this Ethernet Switch / Power Inserter is in

compliance with the essential requirements and other relevant provisions

of Directives 73/23/EEC and 89/336/EEC."

A copy of regulatory compliance documentation may be obtained in writing from

“IP access Ltd, Building 2020, Cambourne Business Park, Cambourne,

Cambridge, CB3 6DW, UK”.

COMPANY CONFIDENTIAL CENG0133_C_Customer_Safety_and

_Regulatory_Information.doc

- 13 -

5 NANOBTS Products

5.1 NanoBTS - Handbook - Warnings and Cautions

This system is designed to be operated indoors as a fixed system device

and must be located either on or near the ceiling away from the user. It must be

mounted in a manner to ensure that all users and bystanders are kept a

minimum of 20cm away from the integral antennas at all times.

Do not touch or move the antenna(s) while the unit is transmitting or

receiving.

Do not hold any component containing a radio such that the antenna is

very close to or touching any exposed parts of the body, especially the face or

eyes while transmitting.

In most parts of the world, regulatory approval(s) are needed before the

nanoBTS is operated.

Do not connect any device other than the nanoBTS to any RJ45 socket

that has been enabled for nanoBTS connection (i.e. 48Vdc operation).

The nanoBTS is intended for dry indoor applications only. If evidence of

condensation is present do not apply power to the nanoBTS.

The nanoBTS must only be powered using an ip.access model 109 PSU

(PPI part number ILA1711112) or ip.access model 126 Ethernet switch and

power inserter (unless prior written approval is obtained from IP Access). Model

165 BTS’s may also be powered by a direct 48V connection using a PSU

specified in writing by IP Access Ltd

COMPANY CONFIDENTIAL CENG0133_C_Customer_Safety_and

_Regulatory_Information.doc

- 14 -

PSU’s supplied by ip.access must not be used for powering any other

equipment (unless carried out in a manner having prior written approval from IP

Access).

TIB ports on the NanoBTS may only be connected with ip.access supplied

cables with part numbers 139-040, 139-041, 139-042, 139-043 or 165-076.

Fitting external antenna or antenna cabling to the BTS invalidates the type

approval, CE marking and UL listing referred to herein (unless carried out in a

manner having prior written approval from IP Access).

Maximum cable length from the Ethernet Hub, Switch or PSU is limited to

100m.



5.2 NanoBTS - Handbook - Parts required for each nanoBTS

• WALL FIXINGS: These are not normally provided as part of the

NanoBTS but should be suitable for the wall material and weight of

the NanoBTS (2.7kg). Suggested materials are 4 x 30mm no.10

woodscrews or M5 bolts and wall plugs (if required).

• PSU.

• NanoBTS complete with mounting bracket.

• RJ45-RJ45 connecting leads

5.3 NanoBTS - Handbook - Provision of Power to the nanoBTS

Power for the NanoBTS may be inserted at either the RJ45 outlet or at the

output of the last Ethernet switch/hub/router etc. see figure below.

COMPANY CONFIDENTIAL CENG0133_C_Customer_Safety_and

_Regulatory_Information.doc

- 15 -

Ethernet Switch

nanoBTS nanoBTS

BSC

RJ45(48v)

RJ45

PSU φ

φφ

PSU θ

θθ

θPSU located at the switch

φφ

φPSU located at nanoBTS

When using the ip.access model 126A Ethernet Switch and Power Inserter,

external PSU’s are not required, the NanoBTS is connected locally or via site

cabling to the powered ports of the 126.

and 48V Power Inserter

nanoBTS (max qty 7)

BSC

RJ45(48v)

RJ45(48V)

126A Ethernet Switch

Ethernet

COMPANY CONFIDENTIAL CENG0133_C_Customer_Safety_and

_Regulatory_Information.doc

- 16 -

5.3.1 NanoBTS - Handbook - Installing the PSU at the Ethernet switch.

If the 109 PSU is located at the patch panel /output port of the Ethernet switch, it

is important that the 109 PSU is connected exactly as illustrated below (failure to

do so may cause damage to the switch). Ensure that the 109 PSU is placed in a

location that is ventilated and that the connection leads provide no safety hazard.

PSU

48Vdc

110-230Vac

RJ45

Connection to LAN

Connection to nanoBTS

Cable to nanoBTS

Ethernet Switch

5.3.2 Nano - BTS Handbook - Installing the PSU at the nanoBTS.

Ensure that the 109 PSU is placed in a location that is ventilated and that the

connection leads provide no safety hazard.

RJ45

Connection to LAN

PSU

48Vdc

110-230Vac

Connection to nanoBTS

COMPANY CONFIDENTIAL CENG0133_C_Customer_Safety_and

_Regulatory_Information.doc

- 17 -

5.4 NanoBTS - Handbook – FCC Text

Standards

• FCC Rule 47 Parts 2, 15, 24

NOTE: Changes or modifications not expressly approved by the party

responsible for compliance may void the user's authority to operate this

equipment.

Model 110 NanoBTS has FCC ID QGGM180TVX

Model 140 NanoBTS has FCC ID QGGKU02ZZT

Model 165B NanoBTS has FCC ID QGGKU02ZZP

5.5 NanoBTS - Handbook – IC Text

Standards

• RSS133 issue 2

NOTE: Changes or modifications not expressly approved by the party

responsible for compliance may void the user's authority to operate this

equipment.

Model 110 NanoBTS has IC (Industry Canada) ID 4644B-M180TVX

Model 140 NanoBTS has IC (Industry Canada) ID 4644A-KU02ZZT

Model 165B NanoBTS has IC (Industry Canada) ID TBA