Contents
- 1. User Manual-1
- 2. User Manual-2
User Manual-2
PKG-5536 iPad Pro 9 7 Clamcase Man 128 gsm C2S 5.25 x 3.75 24pg Booklet 06/23/2016 PMS 299 C PMS 430 C dieline Laptop Mode Mode ordinateur portable Touchscreen Mode Mode écran tactile Tablet Mode Mode tablette Setup Configuration • Place your iPad inside the bottom edge of the ClamCase. Placez votre iPad dans le bord inférieur de la coque ClamCase. • Press your iPad into the top edge of the ClamCase and it will snap in securely. Appuyez votre iPad dans le bord supérieur de la coque ClamCase. Il s’encliquète à l’intérieur en toute sécurité. • To remove, snap back the top clip of the ClamCase and release your iPad. Pour l’enlever, tirez vers l’arrière le clip situé en haut de la coque ClamCase et retirez votre iPad. snap clic Charge Charge • Charge your ClamCase with the supplied USB cable until the charging indicator LEDs turn into 4 full flashes when fully charged. Chargez votre ClamCase avec le câble USB fourni jusqu’à ce que le voyant de charge passe au vert. • A full charge can take up to 180 minutes. Charger totalement la batterie peut prendre jusqu’à 180 minutes. Power up Allumage • Turn on the ClamCase keyboard before use. Allumez le clavier ClamCase avant de l’utiliser. When in tablet mode, the keyboard automatically turns off to avoid unintentional key strokes. Lorsque vous êtes en mode tablette, le clavier s’éteint automatiquement afin d’éviter que vous ne tapiez sur des touches par inadvertance. Pairing Jumelage • Your ClamCase+ automatically enters pairing mode when first powered on. Votre ClamCase+ se mettra automatiquement en mode jumelage la première fois qu’il est allumé. Manual Pairing: On your ClamCase keyboard press and hold the function and command key for 5 seconds. The pairing LED will begin flashing. Jumelage manuel : Sur votre clavier ClamCase, appuyez sur la touche de fonction et de commande, puis maintenez-la enfoncée pendant cinq secondes. Le voyant de jumelage commence à clignoter. Open the Settings app on your iPad. Ouvrez l’appli de configuration sur votre iPad. Turn Bluetooth on. Allumez le Bluetooth. Tap to connect: Pour la connexion, appuyez sur : ClamCase Plus Power Keyboard Function Keys Touches fonctionnelles Keyboard Brightness Luminosité du clavier iOS iOS Home Accueil Languages Verr Maj Lock Verrouillage Siri Siri Search Rechercher Media Média Bluetooth Bluetooth Back Arrière Play/Pause Lire / pause On-Screen Keyboard Clavier à l’écran Dimmer/off Variateur / éteindre Brighter Lire / lumineux Volume Volume Forward Avant Mute Muet Down Moins Up Plus Ca Ve Home Accueil Lock Verrouiller Keyboard Brightness Luminosité du clavier ss er Caps Lock Verr Maj Bluetooth Bluetooth iOS iOS Media Média Volume Volume Siri Siri Keyboard Brightness Keyboard Brightness • Your ClamCase+ has a backlit keyboard Votre coque ClamCase+ est dotée d’un clavier rétroéclairét Push to decrease brightness 4 levels on backlit keyboard Appuyez pour réduire la luminosité du clavier rétroéclairé (4 niveaux) Push to increase brightness 4 levels on backlit keyboard Appuyez pour augmenter la luminosité du clavier rétroéclairé (4 niveaux) Battery Life Autonomie de la pile • Press power button. Appuyez sur le bouton d’alimentation. • The LED will flash to indicate battery life. Le témoin lumineux clignote pour indiquer l’autonomie de la pile. Flashes Clignotements Percentage Porcentaje 100-75% 75-50% 50-25% 25-0% Battery Bank Battery Bank • Your ClamCase+ Power has a 6000mAh Battery Bank Votre ClamCase+ Power est doté d’un banc de batteries de To charge a device connect a cable to the USB port, plug the cable into your device, hold down the power button for 3 seconds to activate power to your device and charging will begin. Pour charger un appareil, insérez un câble dans le port USB, puis branchez celui-ci sur votre appareil. Ensuite, maintenez le bouton d’alimentation enfoncé pendant 3 secondes pour activer la puissance et amorcer la charge. Troubleshooting Dépannage • Press any key to wake your ClamCase from sleep mode. Appuyez sur n’importe quelle touche pour faire sortir votre ClamCase du mode veille. • Turn your ClamCase off and then back on. Eteignez votre ClamCase puis rallumez la coque. • Recharge the ClamCase battery. Rechargez la batterie ClamCase. • Re-establish a Bluetooth connection between your ClamCase and iPad. Etablissez à nouveau une connexion Bluetooth entre votre ClamCase et votre iPad. • Verify your iPad’s Bluetooth feature is turned on. Vérifiez que la fonction Bluetooth de votre iPad est bien allumée. This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement." RF avertissement: le dispositif a été évalué à satisfaire l'exigence générale de l'exposition aux rf.l'appareil peut être utilisé dans des conditions d'exposition portatif sans restriction.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Tagged PDF : No XMP Toolkit : 3.1-701 Create Date : 2016:06:16 12:32:45-07:00 Metadata Date : 2016:07:28 09:35:25+08:00 Modify Date : 2016:07:28 09:35:25+08:00 Creator Tool : Adobe InDesign CC 2015 (Macintosh) Instance ID : uuid:cd1ec92f-51d8-43c6-9deb-593468642c30 Original Document ID : xmp.did:fba6ff65-6c69-4c7a-a7d8-687fddcb73c9 Document ID : xmp.id:7e046f4a-7b32-4e92-8206-42fbbc608d8e Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:2751602f-7b04-4fac-86c3-76f5c09ded93 Derived From Document ID : xmp.did:32ba424d-d255-4096-991d-d99d585a4c70 Derived From Original Document ID: xmp.did:fba6ff65-6c69-4c7a-a7d8-687fddcb73c9 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2015 (Macintosh) History Changed : / History When : 2016:06:16 12:32:45-07:00 Format : application/pdf Description : Subject : Title : Creator : Producer : Adobe PDF Library 15.0 Trapped : False Keywords : Page Count : 25 Language : en-US Author :EXIF Metadata provided by EXIF.tools