PPE Inspection Inspection procedure · In addition to routine checks for each use, PPE should regularly undergo a detailed inspection by a competent person. Petzl recommends an inspection every 12 months and after any exceptional event in the life of the product. · PPE inspection should be conducted with the manufacturer's Instructions for Use. Download the instructions at PETZL.COM. AVAO BOD ASTRO SIT SEQUOIA PROFESSIONAL HARNESSES 1. Known product history Any PPE showing unexpected degradation should be quarantined, pending a detailed inspection. The user should: - Provide precise information on the usage conditions. - Report any exceptional event regarding his/her PPE. (Examples: fall or fall arrest, use or storage at extreme temperatures, modification outside manufacturer's facilities...). 2. Preliminary observations NEWTON Verify the presence and legibility of the serial number and the CE mark. Note: the serial number code on our products is evolving. Two types of code will coexist. See below for details on each serial number code. Code A: Code B: Year of manufacture Day of manufacture Name of Inspector Incrementation 00 000 AA 0000 Year of manufacture Month of manufacture Batch number Incrementation 00 A 0000000 000 Verify that the product lifetime has not been exceeded. Compare with a new product to verify there are no modifications or missing parts. 3. Checking the condition of the straps Check for cuts, swelling, damage and wear due to use, to heat, and to contact with chemicals. Check the waistbelt straps, leg loops, leg loop/waistbelt linkage and shoulder straps, if present. Be sure to check the areas hidden by the buckles. · Check the condition of the safety stitching on both sides. Look for any threads that are loose, worn, or cut. The safety stitching is identified by thread of a different color than that of the webbing. PPE INSPECTION - Inspection procedure - PROFESSIONAL HARNESSES (151019) 1/9 · Verify that hems are present on the strap ends. 4. Checking the attachment points · Check the condition of the metal attachment points (marks, cracks, wear, deformation, corrosion...). · Check the condition of the textile attachment points (cuts, wear, tears...). · Check the condition of the plastic attachment points (cuts, wear, tears...). · On the multi-standard NAVAHO and AVAO harnesses, check the fall arrest indicator. The indicator shows red if the dorsal attachment point sustains a shock load greater than 400 daN. PPE INSPECTION - Inspection procedure - PROFESSIONAL HARNESSES (151019) 2/9 5. Checking the condition of the adjustment buckles · Check the condition of the DOUBLEBACK adjustment buckles (marks, cracks, wear, deformation, corrosion...). · Check the condition of the FAST adjustment buckles (marks, cracks, wear, deformation, corrosion...). FAST Before 2013 FAST · Check that the straps are correctly threaded, with no twists. · Verify that the buckles operate properly. FAST Before 2013 FAST FAST LT FAST LT PLUS FAST Before 2013 Close Open FAST Close CLIC ! Open FAST LT Close CLIC ! FAST LT PLUS Close CLIC ! Open Open PPE INSPECTION - Inspection procedure - PROFESSIONAL HARNESSES (151019) 3/9 6. Checking the condition of the comfort parts · Check the condition of the waist, leg and shoulder foams (cuts, wear, tears...). · Check the condition of the elastic and/or plastic keepers (cuts, wear, tears...). · Check the condition of the leg loop elastics (cuts, wear, tears...). · Check the condition of the equipment loops (cuts, wear, tears...). PPE INSPECTION - Inspection procedure - PROFESSIONAL HARNESSES (151019) 4/9 7. Checking the condition of the chest/seat harness connector (if any) · For connector inspection, see the inspection form for your connector model at Petzl.com. · If the harness features a chest/seat harness connector, make sure that it is present. · Verify that the connector is the correct model and that it is correctly attached to the harness. · Gated attachment point: verify that the screws on the gated attachment point are present and properly tightened. 8. Checking the condition of the CROLL rope clamp (if any) · For rope clamp inspection, see the inspection form for your rope clamp model at Petzl.com. PPE INSPECTION - Inspection procedure - PROFESSIONAL HARNESSES (151019) 5/9 9. Special case for SEQUOIA/SEQUOIA SRT harnesses · Check the condition of the textile attachment bridge (cuts, wear, tears...). For attachment bridges made of rope: make sure the rope has no cuts, burns, frayed strands, fuzzy areas, or signs of chemicals... · Check the condition of the gated rings (marks, cracks, wear, deformation, corrosion...). Verify that the screw is in place and properly tightened. Mounting compatibility (certification not taken into account) SEQUOIA V1 SEQUOIA V2 SEQUOIA V3 (2019) Bridge v1 Strap Bridge v2 Rope with eye Bridge v3 (2019) With stopper ADJUST bridge v2 and v3 PPE INSPECTION - Inspection procedure - PROFESSIONAL HARNESSES (151019) 6/9 10. Special case: NEWTON HI-VIZ · On the HI-VIZ models, check the condition of the HI-VIZ vest and of the reflective bands (cuts, wear, fading...). 11. Appendices: examples of worn harnesses that should be retired or repaired · Cut equipment loop · Cut load adjustment strap · Damaged protective fabric · Damaged protective fabric PPE INSPECTION - Inspection procedure - PROFESSIONAL HARNESSES (151019) 7/9 · Reversed bar · Damaged webbing · Marking on webbing · Cut webbing · Damaged webbing · Damaged webbing · Unstitched hem · Damaged attachment point · Fall indicator is visible · Damaged safety stitching · Damaged attachment point · Damaged attachment point · Damaged attachment point PPE INSPECTION - Inspection procedure - PROFESSIONAL HARNESSES (151019) 8/9 · Worn out D-ring · Broken buckle · Corrosion · Corrosion · Traces of paint · Buckle not working Petzl contact PPE INSPECTION - Inspection procedure - PROFESSIONAL HARNESSES (151019) 9/9