instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area may cause harmful interference in which case interference at one’s own expense. 2 947557 ER ED 1 ED 2 INE UT UTE SWITCH 2 SWITCH 1 GROUND RK ET - - RED BLACK Clock Mounting Remove the side screws holding the mounting ...
This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause ...
instructions in the literature accompanying this unit. Issue 2 VE4171-D440 IP DIGITAL 4 DIGIT CLOCK/WALL MOUNT SPEAKER INTRODUCTION The VE4171-D440 IP Clock with Speaker includes a 4” Digital Clock and a Wall Mount Speaker. The wall speaker is an 8” interior talkback speaker. This provides synchronized time, talkback intercom and
Issue 2 VE4171-D440 IP DIGITAL 4 DIGIT CLOCK/WALL MOUNT SPEAKER INTRODUCTION The VE4171-D440 IP Clock with Speaker includes a 4" Digital Clock and a Wall Mount Speaker. The wall speaker is an 8" interior talkback speaker. This provides synchronized time, talkback intercom and loudspeaker paging from one IP network connection. The 4-digit Digital Clock can be programmed to sync with any NTP (Network Time Protocol) server. The clock and speaker enclosures are made of steel with a durable powder coated finish. The color of the enclosures can be easily changed to match any décor. A cloth covered detachable grille is included with the speaker. Power is provided to both the clock and speaker via a Power over Ethernet (PoE) switch meeting the 802.3af specification. SPECIFICATIONS Features RJ-45 network connection Easy to read, high visibility Red digits display hours and minutes (4 digit display) Selectable 12 or 24 hour format Power over Ethernet (PoE) 802.3af compatible High Efficiency DIMENSIONS/WEIGHT 4 Digit VIP-D440A - 17.00" L x 3.00" W x 6.75" H (43.18 cm) X (7.62 cm) X (17.14 cm) Weight: 4.50 LBS (2.0 kg) V-1071 - 10.13" H x 12.31" W x 4.63" D (25.73cm x 31.27cm W x 11.75cm D) Weight: 4.25 LBS (1.9 kg) Nominal Power Requirements Via 802.3af PoE Ethernet Switch: Class 3 Environment Temperature: Humidity: 0 to +40° C 0 to 85% non-precipitating Precautionary Designations CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: To reduce the risk of electric shock, Do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit. INSTALLATION FCC Information This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area may cause harmful interference in which case the user will be required to correct the interference at one's own expense. 1 947557 SPEAKER LED 1 LED 2 -10dB LINE LEVEL OUT MUTE SWITCH 2 SWITCH 1 GROUND RESET NETWORK Clock Mounting Remove the side screws holding the mounting plate/rear panel to the enclosure. Mount the plate to the wall or a standard double-gang electrical box using appropriate hardware such as #8 pan head screws (not supplied). After making the required connections, reattach the enclosure to the mounting plate, rear panel. Speaker Mounting Remove the screw holding the mounting bracket to the enclosure. Mount the bracket using appropriate hardware such as #8 pan head crews. After making the required connections, reattach the enclosure to the mounting bracket. Speaker Connections Connect the attached wire assembly from the V-1071 to the Speaker screw connections on the clock circuit board. Network Connection The VE4171-D440 has one RJ-45 network connector on the rear panel. Connect a standard Ethernet patch cable from the VE4171-D440 into an Ethernet switch. If a PoE switch is not available, a PoE mid-span injector may be used to supply power to the clocks. -+ -+ Call Switch Connection For IP Speakers using Talkback functionality, a call switch input via screw terminals is provided. Connect a momentary contact switch to Switch 1 and Ground. -10 dB Line Level Out Connection The -10dBm Line Level Out may be connected to up to 40 Valcom Self Amplified Speakers in order to provide additional sound reinforcement in an area. Mute Out Connection The Mute Out may optionally be connected to the mute input of Valcom audio management systems in order to suspend locally originated audio during intercom announcements. LED 1 and LED 2 Connection LED 1 (+) and LED 2 (-) is a current limited output designed to illuminate an optional LED. The LED is intended to provide visual indication of call progress. The LED illumination will flash when the call switch is pressed and will continue to flash until the call is answered. The LED illumination will be solid when a connection to the unit is established. SETUP Information specific to your application will need to be programmed into the VIP's using a computer. The PC used for programming should be connected to the same subnet as the VIP's. Setup will be done using the IP Solutions Setup Tool. Download the latest version of the free IP Solutions Setup Tool from Valcom web site at www.valcom.com/vipsetuptool. RED BLACK IP CLOCK/SPEAKER CONNECTIONS 2 947557 TECHNICAL ASSISTANCE When trouble is reported, verify power is being supplied to the unit and there are no broken connections. If a spare unit is available, substitute a spare unit for the suspected defective unit. Assistance in troubleshooting is available from the factory. Call (540) 563-2000 and press 1 for Technical Support or visit our website at http://www.valcom.com or via email at support@valcom.com Valcom equipment is not field-repairable. Valcom, Inc. maintains service facilities in Roanoke, VA. Should repairs be necessary, attach a tag to the unit clearly stating your company name, address, phone number, contact person and the nature of the problem. Send the unit to: Valcom, Inc. Repair & Return Dept. 5614 Hollins Road Roanoke, Va. 24019-5056 WARRANTY Warranty information may be found on our website at www.valcom.com/warranty. 3 947557Microsoft Word 2013