Support - Ohio Steel IndustriesOhio Steel IndustriesParts Store - Ohio Steel IndustriesOhio Steel IndustriesParts Store - Ohio Steel IndustriesOhio Steel IndustriesUser Manual for Cub Cadet models including: CC-4048PS-ATV, 15 cu ft Dump Cart, Poly Swivel Dump Cart, 8496298, 9242588
read and follow all safety rules and operating instructions before using this equipment cc-4048ps-atv 15 cu ft poly swivel dump cart u.s. patent no. 8,496,298 & 9,242,588 6004372 - rev a 08/19
CC-4048PS-ATV 15 cu ft POLY SWIVEL DUMP CART U.S. Patent No. 8,496,298 & 9,242,588 READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS BEFORE USING THIS EQUIPMENT 6004372 - REV A 08/19 Safety Rules This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. Read and understand all safety rules and operating instructions before using this tractor/ATV/UTV attachment. Follow all safety rules and operating instructions provided by your vehicle's manufacturer when using attachment. Never allow children or untrained persons to operate vehicle or attachment. Do not exceed the vehicle manufacturer's towed weight limit. Reduce vehicle speed and allow extra stopping distance when towing heavy loads. Reduce vehicle speed and towed weight when operating on slopes. Operate up and down slopes, never across the face of slopes. Do not carry passengers on vehicle or attachment. Avoid sudden turns or maneuvers. Do not tow attachment on public roadways. Do not remove warning decals from product. Check product for worn, loose, or damaged parts before each use. If any damage is present, repair the product before using. Check product for loose or missing fasteners before each use. Tighten or replace fasteners as needed before using. Do not exceed vehicle speed of 20 miles per hour when towing Dump Cart. Do not exceed Dump Cart rated weight capacity of 1250 pounds. 1 AttachReceipt Here: Warranty IF YOU ARE MISSING PARTS DO NOT RETURN TO STORE Email cs@ohiosteel.com or call 1-800-652-2321, ext. 212 Before you call, please email our customer service team at cs@ohiosteel.com with the following: 1. A description of the issue you are having 2. Photos of the issue that include an overall view and detailed view from multiple angles 3. If applicable, a short video showing the issue Replacement Parts: You can place your parts order online at ohiosteel.com/partsstore · You can also reach our Customer Service Department at 1-800-652-2321, ext. 212 · If you are ordering replacement part(s) for your product, please note that some parts are only available as a repair kit. If this product fails due to a defect in material or workmanship within THREE YEARS from the date of purchase, we will at our option, only with receipt of purchase, repair or replace it free of charge. This warranty excludes tires, bushings, and bearings which are expendable and become worn during normal use. This warranty does not cover: · Repairs necessary because of operator abuse or negligence. · Equipment used for commercial or rental purposes. · Paint that is worn or faded due to normal use or exposure. To arrange for product repair visit ohiosteel.com/customer-support and fill out the warranty repair form. You can also call 1-800-652-2321, ext. 212 to speak to our Customer Service Team This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. This warranty applies only while this product is in use in the United States. 2 Carton Contents 1 (x1) 2 (x1) 4 (x2) 3 (x1) 5 (x2) (x1) (x1) 23 (x2) 24 (x2) 25 (x4) 28 (x12) 29 (x4) 26 (x8) 30 (x2) 32 (x2) 34 (x2) 27 (x12) 31 (x2) 33 (x1) 35 (x1) TOOLS REQUIRED FOR ASSEMBLY: · 1/2" Wrench and Socket · 9/16" Wrench and Socket 3 36 (x2) · Needle-Nose Pliers · Grease Gun Assembly Instructions 1 Hold Poly Body (1) on side as shown. Insert Hex Bolts (25 &26) as shown. 25 1 26 26 2 Flip Poly Body (1) to expose bolts. 1 Tape Tape Tape TIP: Bolt heads can be secured with tape to aid in assembly. 3 Install Undercarriage (2) over top of Hex Bolts. Install Lockwasher (27) and tighten Hex Nuts (28) onto Hex Bolts. 27 28 2 28 27 4 Assembly Instructions 4 Attach Front Support (3) to Poly Body (1). Install Lockwasher (27) and tighten Hex Nuts (28) onto Hex Bolts. 28 28 27 27 3 5 Insert Stub Axles (4) into Undercarriage (2) and secure with Clevis Pins (31) and Hairpin Cotters (32) 32 4 32 2 31 4 31 6 Slide Washers (29), Spacers (38), and Wheels (5) onto Stub Axles (4). Install Cotter Pins(30). Bend legs of Cotter Pins to secure. 4 29 38 5 29 29 29 30 5 Assembly Instructions 7 Align holes in Swivel Clevis and Undercarriage and install Clevis Pin (33) as shown. Secure Pin with Hairpin (34). 34 34 33 33 8 Depress Foot Pedal (11), insert Front Support (3) into Drawbar Assembly. When Drawbar is locked in place, flip cart upright onto wheels. 11 3 9 Insert preassembled hybrid hitch assembly into Drawbar. Insert Hex Bolts (23) and tighten Nylock Nuts (24). Install Hitch Pin (35)and Hairpin Cotter (34). 21 20 22 24 35 DO NOT OVERTIGHTEN, HITCH MUST SPIN FREELY. 34 23 6 Operating Instructions Before Using Dump Cart: 1. Apply lithium grease to wheels using grease gun until grease can be seen squeezing out from both sides of the wheel. 2. Check tire pressure and inflate to 24 psi if needed. 3. Read all Safety Rules found on page 1. How to Use Dump Cart: 1. Attach Dump Cart to your tractor, ATV, or UTV as shown below. 2. Do not exceed 1250 pounds when loading material into the cart body. 3. Distribute the weight of the load as evenly as possible in the cart body for best handling. 4. When hauling heavy loads, verify that your vehicle has adequate towing and braking capacity. 5. Do not exceed 20 miles per hour when towing Dump Cart. 1-7/8" / 2" Ball above 12" 1-7/8" / 2" Ball below 12" Pin How to Empty Dump Cart: 1. Step down the foot pedal to release the latch mechanism. 2. Lift the body and swivel as desired to guide the material to preferred location. 3. Lift the body entirely and empty material. 4. Lower the body and guide the latch into the drawbar and relatch. Periodic Maintenance: · Tighten fasteners as needed before each use · Check tire pressure before each use · Grease wheels annually 7 13.00 Do-It-Yourself Accessories 35.13 31.63 USE 1/2" PLYWOOD 35.25 USE STANDARD 2 X 4 34.00 13.00 45.00 13.00 13.00 USE NOMINAL GRADE C 1 X 3 8 16.00 Repair Parts 25 26 1 27 2 32 4 29 5 37 36 29 30 28 31 38 3 11 15 18 17 34 33 8 24 22 9 13 14 10 8 7 35 23 19 20 12 16 34 21 ITEM PART NO DESCRIPTION QTY ITEM PART NO DESCRIPTION QTY 1 311161 POLY BODY 1 21 6000534-B2 HYBRID HITCH 1 2 6000320-B2 UNDERCARRIAGE 1 22 6000379-B2 HITCH BUSHING 1 3 6000311-B2 FRONT SUPPORT ASSEMBLY 1 23 3/8"-16 X 3" HEX BOLT 2 4 6000523 STUB AXLE 2 24 NYLOCK NUT, 3/8"-16 2 5 6000727-C WHEEL (BEARING/BUSHINGS INC.) 2 25 5/16"-18 X 1-1/2" HEX BOLT 4 7 3/8"-16 X 3" HEX BOLT 1 26 5/16"-18 X 3" HEX BOLT 8 8 NYLOCK NUT, 3/8"-16 4 27 5/16" SPLIT LOCKWASHER 12 9 WASHER, 1/2" FLAT 10 WASHER, 3/8" FLAT 11 FOOT PEDAL 1 1 1 28 29 30 KIT 6000462 HEX NUT, 5/16"-18 WASHER, 1" SAE COTTER PIN, 3/16" X 1-1/2" 12 4 2 12 13 14 KIT 6000323-BY LATCH CLEVIS, SWIVEL DRAWBAR, WELDED 1 31 1 32 1 33 CLEVIS PIN, 1/4" X 1-1/2" 2 HAIRPIN COTTER, 1-3/16" 2 CLEVIS PIN, 1/2" X 2" 1 15 3/8" FLANGED BUSHING 2 34 HAIRPIN COTTER, 2-5/16" 2 16 SPRING, LATCH 2 35 HITCH PIN 1 17 SPRING WASHER, 1/2" 1 36 KIT 1" RETAINER BUSHING 4 18 SHOULDER BOLT, 1/2" 1 37 6000818 1" ROLLER BEARING 2 19 3/8"-16 X 3-1/2" HEX BOLT 2 38 300121 SPACER, 1" ID X 1.375" LONG 2 20 6000536-B2 KEEPER WELDMENT 1 ohiosteel.com/partstore 9 OHIO STEEL INDUSTRIES 1-800-652-2321 Designed And Tested In Columbus, Ohio Manufactured In The U.S.A. From Domestic And Imported Components M ODEL # CC-4048PS-ATV (800) 652-2321 (8 0 0 ) 6 5 2 -2 3 2 1