60101-000501. SPRINKLER STANDS. For additional information on sprinklers stands and assembly instructions please review. GyroNet™ Turbo user manual.
MICRO SPRINKLERS MICRO EMITTERS SPRINKLERS PRODUCT CATALOG 2019 V1.0 Products appearing in this catalogue may be covered by one or more of the following US Patent No. 6863226 and other U.S. patents pending or corresponding issued or pending foreign patents All rights are reserved. You are specifically prohibited and not allowed to reproduce, copy, duplicate, manufacture, supply, sell, hire, distribute or adapt all or any part of this publication including any packaging. NetafimTM, are trademarks of NetafimTM Ltd., registered in the U.S. and other countries. We endeavor to provide accurate, quality and detailed information. However we cannot accept liability for your reliance on the provided information and you are advised to independently seek professional advice from NetafimTM and/or its authorized representatives. There is no undertaking by us that the provided information or any part thereof is accurate, complete or up to date . Mention of third-party products is for informational purposes only and constitutes neither an endorsement nor a recommendation. NetafimTM assumes no responsibility with regard to the performance or use of these products. In no event shall NetafimTM be liable for any indirect, incidental, special or consequential damages. CONTENTS 1) Pressure compensated Micro-sprinklers and Micro-emitters SupernetTM LR & LRD SupernetTM MR & MRD SupernetTM SR & SRD SupernetTM SSR SupernetTM UD SupernetTM GS SupernetTM JET SupernetTM JET 20 SupernetTM Components StripnetTM Pro PulsarTM with StripnetTM Head PulsarTM with GyronetTM Head PulsarTM with MistnetTM Head PulsarTM with VibronetTM Head PulsarTM with CoolnetTM Pro Head 2) Micro-sprinklers and Micro-emitters GyronetTM LR & LRD GyronetTM MR & MRD GyronetTM SR & SRD GyronetTM UD GyronetTM JET GyronetTM Components VibronetTM SD 3) Micro-sprinklers and Micro-emitters Upright stands complementary accessories Connectors and Stand accessories 4) Micro-emitters for nurseries and pot irrigation PC Spray Stakes Spray Stake 5) Micro-sprinklers and Micro-emitters for protected crops SpinnetTM SpinnetTM SD VibronetTM CoolnetTM Pro MistnetTM CoolNetTM Pro and MistNetTM components 6) Micro-sprinklers and Micro-emitters Upside-down stands complementary accessories Connectors and Stand accessories 7) Sprinklers and Midi-sprinklers GyronetTM Turbo Gyro Gig 2050 MeganetTM 15D MeganetTM 24D D-NetTM 8550 D-NetTM 8550 AA D-NetTM 0950 D-NetTM 6550 LWP 2450 D-NetTM 9575 D-NetTM 9575 AA HWP 2475 8) Sprinklers stands complementary accessories connectors and stand accessories 9) NetafimTM Flexible pipes, FlexNetTM and FlexNetTM HP 10) Micro-tubes and tubes, complementary accessories 11) Tools SPRINKLERS 2019 V1.0 CONTENTS 4 8 10 14 16 20 22 26 28 30 34 36 40 42 44 46 50 52 56 60 63 64 66 68 70 72 76 80 84 88 90 91 92 96 100 104 108 112 114 118 122 126 130 132 135 136 138 141 3 SUPERNETTM LR & LRD LONG RANGE & LONG RANGE WITH DEFLECTOR APPLICATIONS Irrigation of tree plantations with large root volumes. SPECIFICATIONS LR means a revolving rotor irrigating a large area. LRD stream deflector concentrates all the water in the area surrounding the young tree during the initial growing period. When the tree grows, the stream deflector can be broken off, thus enabling extended irrigation diameter. Flow regulated micro-sprinkler, 9 different flow rates: 20, 30, 35, 40, 50, 58, 70, 90, 110 l/h. Flow rates within pressure range. Pressure range 1.5-4.0 bar. Recommended filtration: 200 micron / 80 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter. When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to NetafimTM expert team's instructions. 5 types of inlet connectors: Barb Self tapping Press fit 3/8" male threaded 1/2" male threaded 2 types of upper bearing: Standard - for normal water EverspinTM - for harsh condition The rotor is colored Purple for flows of 20 to 40 l/h, and Black for flows of 50 to 110 l/h. SuperNetTM micro-sprinklers meet ISO 8026 standards (SI 1406) with production certified by the Israel Standards Institute (SII). FEATURES AND BENEFITS Unique regulation mechanism ensures even water and nutrients quantities per tree, uniform distribution and wetting diameter regardless of sprinkler's inlet pressures (within pressure range). Anti-ant mechanism prevents insect penetration into the area of the micro-sprinkler nozzle. Regulated micro-sprinkler made of plastic materials resistant to all agrochemicals & weather conditions. Water passage area 30% larger than in any other emitter with identical flow rate. The largest water passages on the market resists clogging. Specially designed for fruit trees, orchards, deciduous and other tree crops requiring efficient water distribution. Can be used in Frost mitigation and/or Cooling irrigation systems. Long-term reliable service, simple, modular parts, clog resistant design. 4 SUPERNETTM LR & LRD SPRINKLERS 2019 V1.0 SUPERNETTM TECHNICAL DATA MODEL FLOW RATE REGULATION CHAMBER CODE COLOR (L/H)* 020 20 030 30 035 35 040 40 050 50 058 58 070 70 090 90 110 110 *within working pressure range Purple Brown Light Blue Blue Green Gray Black Orange Red NOZZLE SIZE (MM) 0.89 1.14 1.20 1.28 1.43 1.55 1.73 1.74 1.70 WORKING PRESSURE RANGE (BAR) 1.5 - 4.0 1.5 - 4.0 1.5 - 4.0 1.5 - 4.0 1.5 - 4.0 1.5 - 4.0 1.5 - 4.0 1.5 - 4.0 2.0 - 4.0 CONSTANT EXPONENT* K X 20 0 30 0 35 0 40 0 50 0 58 0 70 0 90 0 110 0 WETTED DIAMETER (M) LR MODEL 20 CM ABOVE GROUND LRD MODEL 20 CM ABOVE GROUND 4.5 1.5 6.0 1.5 6.0 1.5 6.0 1.5 7.0 1.5 7.0 1.5 7.0 2.0 7.0 2.0 8.0 2.0 SWIVEL (ROTOR) CODE COLOR Purple Purple Purple Purple Black Black Black Black Black PACKAGING DATA SUPERNETTM LR & LRD Head only Complete stand , 60 cm micro tube length ,w/stake Complete stand , 60 cm micro tube length ,w/o stake Complete stand , 90 cm micro tube length ,w/stake Complete stand , 90 cm micro tube length ,w/o stake QUANTITY P/BOX BOX SIZE UNITS (CM X CM X CM) 500 28 x 28 x 57 100 18 x 34 x 79 200 18 x 34 x 79 100 28 x 27 x 113 200 28 x 27 x 113 BOX WEIGHT (KG) 10.1 8.3 7.5 7.1 6.7 BOXES P/PALLET 32 20 20 16 16 TOTAL UNITS P/PALLET 16000 2000 4000 1600 3200 PALLET WEIGHT (KG) 335 178 162 124 117 SUPERNETTM LONG RANGE & LONG RANGE WITH DEFLECTOR Flowchart to determine the desired product definition How to use: To determine the desired product definition select one of every set of options displayed on the chart. EMITTER DISPERSION DEFLECTOR SuperNetTM SPN Long Range swivel LR HEAD INLET CONNECTOR Barb BIC Press fit MIC UPPER BEARING EverspinTM ESUB Standard STUB Long Range with LRD deflector Self tapping STIC 3/8" Male Threaded 3/8IC 1/2" Male Threaded 1/2IC FLOW 20 l/h 020 30 l/h 030 35 l/h 035 40 l/h 040 50 l/h 050 58 l/h 058 70 l/h 070 90 l/h 090 110 l/h 110 STAND ASSEMBLY Head only HEAD ONLY Head + 60 cm 60CM microtube + Stake W/STK Head + 60 cm microtube 60CM W/OSTK Head + 90 cm 90CM microtube + Stake W/STK Head + 90 cm microtube 90CM W/OSTK Head + XXX cm STL microtube + Stake W/STK CONNECTOR TO LATERAL Barb BC Press fit PFC 3/8" conic 3/8C press fit Head + XXX cm microtube STL W/OSTK *When selecting an undefined tube length, add the desired length in writing. ACCESSORIES Stream splitter SP AD valve 1.5/0.7 bar AD valve 2.0/0.9 bar AD valve 3.0/1.5 bar AD valve 4.0/1.8 bar AD15 AD20 AD30 AD40 SPN SPRINKLERS 2019 V1.0 SUPERNETTM LR & LRD 5 SUPERNETTM LR head only with Standard upper bearing Catalog number : 63500 - (any of below 6 digits) MODEL 020 030 035 040 050 058 070 090 110 BIC 001000 002300 002270 003600 004900 006200 007500 008800 010100 STIC 053350 054650 055720 055950 057250 058550 059850 061150 062450 MIC 113000 113600 114200 114800 115500 116100 116700 117300 117900 3/8IC 105350 105450 105550 105650 105750 105850 105950 1/2IC 108950 108920 109050 109254 109350 109450 109550 SUPERNETTM LR head only with EverspinTM upper bearing Catalog number : 63500 - (any of below 6 digits) MODEL 020 030 035 040 050 058 070 090 110 BIC 053355 STIC 053360 054660 063730 055960 057260 058560 059860 061160 MIC 113010 113695 114810 115620 113605 117405 3/8IC 105755 105870 105960 1/2IC 109252 SuperNetTM LR BIC , barb inlet connector SUPERNETTM LR assembly stands Catalog number : 63500 - (any of below 6 digits) MODEL SPN LR STIC STUB XXX 60CM W/STK BC SPN LR STIC STUB XXX 60CM W/STK PFC SPN LR MIC STUB XXX 60CM W/STK BC SPN LR MIC STUB XXX 60CM W/STK PFC SPN LR BIC STUB XXX 60CM W/STK BC SPN LR BIC STUB XXX 60CM W/STK PFC SPN LR STIC STUB XXX 90CM W/STK BC SPN LR STIC STUB XXX 90CM W/STK PFC SPN LR MIC STUB XXX 90CM W/STK BC SPN LR MIC STUB XXX 90CM W/STK PFC SPN LR BIC STUB XXX 90CM W/STK BC SPN LR BIC STUB XXX 90CM W/STK PFC Catalog number : 63500 - (any of below 6 digits) MODEL SPN LR STIC STUB XXX 60CM W/OSTK BC SPN LR STIC STUB XXX 60CM W/OSTK PFC SPN LR MIC STUB XXX 60CM W/OSTK BC SPN LR MIC STUB XXX 60CM W/OSTK PFC SPN LR BIC STUB XXX 60CM W/OSTK BC SPN LR BIC STUB XXX 60CM W/OSTK PFC SPN LR STIC STUB XXX 90CM W/OSTK BC SPN LR STIC STUB XXX 90CM W/OSTK PFC SPN LR MIC STUB XXX 90CM W/OSTK BC SPN LR MIC STUB XXX 90CM W/OSTK PFC SPN LR BIC STUB XXX 90CM W/OSTK BC SPN LR BIC STUB XXX 90CM W/OSTK PFC 020 020 053450 001200 001600 030 054850 002700 003100 030 054750 002500 003160 035 055735 003552 003551 035 055725 055730 040 056350 056060 004000 004400 040 056150 056050 003800 003700 004200 050 005300 005200 005700 005600 050 057450 057350 005100 005702 058 006600 006500 007000 058 058760 070 060250 060200 116711 007900 007800 008300 070 059950 007700 008100 090 061550 009100 009655 090 061250 117330 009000 009300 110 010500 010400 010955 110 062650 062540 010700 Missing catalog numbers available upon request. Background color defines the code color of the respective swivel. All assembly stands include 4*6.5 mm black SPE micro-tube. Other stand combinations can be ordered based on the attached flowchart which can help determine the desired product requirement. 6 SUPERNETTM LR & LRD SPRINKLERS 2019 V1.0 SUPERNETTM LRD head only with Standard upper bearing Catalog number : 63500 - (any of below 6 digits) MODEL 020 030 035 040 050 058 070 090 110 BIC 011360 013050 014205 014350 015650 016950 018250 019550 020850 STIC 063710 065050 063750 066350 067650 068950 070250 071550 072850 MIC 113100 113700 114300 114900 115600 116200 116800 117400 118000 3/8IC 106150 106200 106230 106250 106300 106350 106400 106450 106500 1/2IC 109650 109700 109900 109950 SUPERNETTM LRD head only with EverspinTM upper bearing Catalog number : 63500 - (any of below 6 digits) MODEL 020 030 035 040 050 058 070 090 110 BIC 001010 STIC 063712 065055 063752 066360 067660 070260 071560 MIC 113710 114310 114910 115610 116805 117410 118010 3/8IC 106155 107662 1/2IC SuperNetTM LRD BIC , barb inlet connector SUPERNETTM LRD assembly stands Catalog number : 63500 - (any of below 6 digits) MODEL SPN LRD STIC STUB XXX 60CM W/STK BC SPN LRD STIC STUB XXX 60CM W/STK PFC SPN LRD MIC STUB XXX 60CM W/STK BC SPN LRD MIC STUB XXX 60CM W/STK PFC SPN LRD BIC STUB XXX 60CM W/STK BC SPN LRD BIC STUB XXX 60CM W/STK PFC SPN LRD STIC STUB XXX 90CM W/STK BC SPN LRD STIC STUB XXX 90CM W/STK PFC SPN LRD MIC STUB XXX 90CM W/STK BC SPN LRD MIC STUB XXX 90CM W/STK PFC SPN LRD BIC STUB XXX 90CM W/STK BC SPN LRD BIC STUB XXX 90CM W/STK PFC Catalog number : 63500 - (any of below 6 digits) MODEL SPN LRD STIC STUB XXX 60CM W/OSTK BC SPN LRD STIC STUB XXX 60CM W/OSTK PFC SPN LRD MIC STUB XXX 60CM W/OSTK BC SPN LRD MIC STUB XXX 60CM W/OSTK PFC SPN LRD BIC STUB XXX 60CM W/OSTK BC SPN LRD BIC STUB XXX 60CM W/OSTK PFC SPN LRD STIC STUB XXX 90CM W/OSTK BC SPN LRD STIC STUB XXX 90CM W/OSTK PFC SPN LRD MIC STUB XXX 90CM W/OSTK BC SPN LRD MIC STUB XXX 90CM W/OSTK PFC SPN LRD BIC STUB XXX 90CM W/OSTK BC SPN LRD BIC STUB XXX 90CM W/OSTK PFC 020 030 035 113170 113770 114370 014201 200300 012550 013850 020 030 035 065250 113150 113750 114350 0013560 012350 013550 040 114970 014750 015150 015240 040 114950 015060 050 115670 016450 016460 050 115650 015850 016250 016270 058 116270 069750 058 116250 070 070650 116760 071050 019050 019150 070 116850 018850 018870 090 117470 019950 072350 020350 020250 090 071565 117450 117500 110 073250 118070 021650 021750 110 118050 073450 020860 Missing catalog numbers available upon request. Background color defines the code color of the respective swivel. All assembly stands include 4*6.5 mm black SPE micro-tube. Other stand combinations can be ordered based on the attached flowchart which can help determine the desired product requirement. SPRINKLERS 2019 V1.0 SUPERNETTM LR & LRD 7 SUPERNETTM MR & MRD MIDDLE RANGE & MIDDLE RANGE WITH DEFLECTOR APPLICATIONS Irrigation of tree plantations with mid-size root volumes. BENEFITS AND FEATURES Ensures higher crop uniformity Unique design of flow regulation mechanism. Unique design of the sprinkler rotor water channel. Achieves optimal results in a varied topography area Thanks to its unique regulation mechanism, the SuperNetTM MR & MRD ensures uniform water and nutrient distribution around the tree, regardless of sprinkler's inlet pressures (within pressure range). Reduces maintenance and repair costs The SuperNetTM has anti-ant mechanism preventing insect penetration into the area of the micro-sprinkler nozzle. The regulated micro-sprinkler is made of plastic materials resistant to all agrochemicals & weather conditions. Offers higher reliability & longevity Long-term reliable service, simple, modular parts, clog resistant design. The water passage area is around 30% larger (depending on the flow rate) than in any other emitter with identical flow rate (largest passage on the market!) thus providing excellent clog resistance. Suitable for diverse applications Specifically designed for fruit trees, orchards, deciduous and other tree crops requiring efficient water distribution. Can be used for frost mitigation and/or cooling irrigation systems. SPECIFICATIONS MR means a revolving rotor irrigating a middle area. MRD stream deflector concentrates all the water in the area surrounding the young tree during the initial growing period. When the tree grows, the stream deflector can be broken off, thus enabling extended irrigation diameter. Flow regulated micro-sprinkler, 7 different flow rates: 20, 30, 35, 40, 50, 58, 70 l/h. Flow rates within pressure range. Pressure range 1.5-4.0 bar. Recommended filtration: 200 micron / 80 mesh. Filtration method to be selected based on the type and concentration of the dirt particles contained in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone shall be installed before the main filter. Wherever sand/ silt/ clay solids exceed 100 ppm, pre-treatment shall be applied according to NetafimTM expert team's instructions. There are 5 types of inlet connectors: Barb, Self-tapping, Press fit, 3/8", 1/2" male threaded. 4 types of upper bearing: Standard = STUB - for normal water, EverspinTM = ESUB - for harsh conditions, Spring = SPUB, Everspin+Spring = SPES. The rotor is colored Brown for all different flows. SuperNetTM micro-sprinklers meet ISO 8026 standards (SI 1406) with production certified by the Israel Standards Institute (SII). 8 SUPERNETTM MR & MRD SPRINKLERS 2019 V1.0 SUPERNETTM TECHNICAL DATA MODEL FLOW RATE REGULATION CHAMBER CODE COLOR (L/H)* 020 20 Purple 030 30 Brown 035 35 Light blue 040 40 Blue 050 50 Green 058 58 Gray 070 70 Black *within working pressure range NOZZLE SIZE (MM) 0.89 1.14 1.20 1.28 1.43 1.55 1.73 WORKING PRESSURE RANGE (BAR) 1.5-4.0 1.5-4.0 1.5-4.0 1.5-4.0 1.5-4.0 1.5-4.0 1.5-4.0 CONSTANT K 20 30 35 40 50 58 70 EXPONENT* X 0 0 0 0 0 0 0 WETTED DIAMETER (M) MR MODEL 25 CM ABOVE GROUND MRD MODEL 25 CM ABOVE GROUND 4.5 2.5 4.5 2.5 4.5 2.5 5.0 2.5 5.0 2.5 6.0 3.0 6.0 3.0 SWIVEL (ROTOR) CODE COLOR Brown Brown Brown Brown Brown Brown Brown PACKAGING DATA SUPERNETTM MR & MRD QUANTITY P/BOX BOX SIZE UNITS (CM X CM X CM) Head only 500 28 x 28 x 57 Complete stand , 60 cm micro tube length ,w/stake 100 18 x 34 x 79 Complete stand , 60 cm micro tube length ,w/o stake 200 18 x 34 x 79 Complete stand , 90 cm micro tube length ,w/stake 100 28 x 27 x 113 Complete stand , 90 cm micro tube length ,w/o stake 200 28 x 27 x 113 BOX WEIGHT (KG) 10.1 8.3 7.5 7.1 6.7 BOXES P/PALLET 32 20 20 16 16 TOTAL UNITS PALLET WEIGHT P/PALLET (KG) 16000 335 2000 178 4000 162 1600 124 3200 117 SUPERNETTM MIDDLE RANGE & MIDDLE RANG WITH DEFLECTOR Flowchart to determine the desired product definition How to use: To determine the desired product definition select one of every set of options displayed on the chart. EMITTER SuperNetTM SPN DISPERSION DEFLECTOR Middle Range MR swivel Middle Range with deflector MRD HEAD INLET CONNECTOR Barb BIC Press fit MIC Self tapping STIC 3/8" Male Threaded 3/8IC 1/2" Male Threaded 1/2IC UPPER BEARING EverspinTM ESUB Spring SPUB Standard Spring EverspinTM STUB SPES FLOW 20 l/h 020 30 l/h 030 35 l/h 035 40 l/h 040 50 l/h 050 58 l/h 058 70 l/h 070 STAND ASSEMBLY Head only HEAD ONLY Head + 60 cm 60CM microtube + Stake W/STK Head + 60 cm microtube 60CM W/OSTK CONNECTOR TO LATERAL Barb BC Press fit PFC 3/8" conic 3/8C press fit Head + 90 cm 90CM microtube + Stake W/STK Head + 90 cm microtube 90CM W/OSTK Head + XXX cm STL microtube + Stake W/STK Head + XXX cm microtube STL W/OSTK *When selecting an undefined tube length, add the desired length in writing. ACCESSORIES Stream splitter SP AD valve 1.5/0.7 AD15 bar AD valve 2.0/0.9 AD20 bar AD valve 3.0/1.5 AD30 bar AD valve 4.0/1.8 AD40 bar SPRINKLERS 2019 V1.0 SUPERNETTM MR & MRD 9 SUPERNETTM SR & SRD SHORT RANGE & SHORT RANGE WITH DEFLECTOR APPLICATIONS Irrigation of tree plantations, and orchards where ground is shaded by the foliage, leaving dry strips between the rows. SPECIFICATIONS SR means a revolving rotor irrigating a medium sized area. SRD stream deflector concentrates all the water in the area surrounding the young tree during the initial growing period. When the tree grows, the stream deflector can be broken off, thus enabling extended irrigation diameter. Flow regulated micro-sprinkler, 9 different flow rates: 20, 30, 35, 40, 50, 58, 70, 90, 110 l/h. Flow rates within pressure range. Pressure range 1.5-4.0 bar. Recommended filtration: 200 micron / 80 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter. When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to NetafimTM expert team's instructions. 5 types of inlet connectors: Barb Self tapping Press fit 3/8" male threaded 1/2" male threaded 4 types of upper bearing: Standard - for normal water EverspinTM - for harsh condition With spring - for upside down application Spring with EverspinTM for upside down application with harsh conditions The rotor is colored Blue. SuperNetTM micro-sprinklers meet ISO 8026 standards (SI 1406) with production certified by the Israel Standards Institute (SII). FEATURES AND BENEFITS Unique regulation mechanism ensures even water and nutrients quantities per tree, uniform distribution and wetting diameter regardless of sprinkler's inlet pressures (within pressure range). Anti-ant mechanism prevents insect penetration into the area of the micro-sprinkler nozzle. Regulated micro-sprinkler made of plastic materials resistant to all agrochemicals & weather conditions. Water passage area 30% larger than in any other emitter with identical flow rate. The largest water passages on the market resists clogging. Specially designed for fruit trees, orchards, deciduous and other tree crops requiring efficient water distribution. Can be used in Frost mitigation and/or Cooling irrigation systems. Long-term reliable service, simple, modular parts, clog resistant design. 10 SUPERNETTM SR & SRD SPRINKLERS 2019 V1.0 SUPERNETTM TECHNICAL DATA MODEL FLOW RATE REGULATION CHAMBER CODE COLOR (L/H)* 020 20 Purple 030 30 Brown 035 35 Light Blue 040 40 Blue 050 50 Green 058 58 Gray 070 70 Black 090 90 Orange 110 110 Red *within working pressure range NOZZLE SIZE (MM) 0.89 1.14 1.20 1.28 1.43 1.55 1.73 1.74 1.70 WORKING PRESSURE RANGE (BAR) 1.5 - 4.0 1.5 - 4.0 1.5 - 4.0 1.5 - 4.0 1.5 - 4.0 1.5 - 4.0 1.5 - 4.0 1.5 - 4.0 2.0 - 4.0 CONSTANT EXPONENT* K X 20 0 30 0 35 0 40 0 50 0 58 0 70 0 90 0 110 0 WETTED DIAMETER (M) SR MODEL 20 CM ABOVE GROUND SRD MODEL 20 CM ABOVE GROUND 2.5 1.8 3.5 1.8 3.5 1.8 3.5 1.8 4.5 1.8 4.5 1.8 5.0 1.8 5.0 2.0 6.5 2.0 SWIVEL (ROTOR) CODE COLOR Blue Blue Blue Blue Blue Blue Blue Blue Blue PACKAGING DATA SUPERNETTM SR & SRD QUANTITY P/BOX BOX SIZE UNITS (CM X CM X CM) Head only 500 28 x 28 x 57 Complete stand , 60 cm micro tube length ,w/stake 100 18 x 34 x 79 Complete stand , 60 cm micro tube length ,w/o stake 200 18 x 34 x 79 Complete stand , 90 cm micro tube length ,w/stake 100 28 x 27 x 113 Complete stand , 90 cm micro tube length ,w/o stake 200 28 x 27 x 113 BOX WEIGHT (KG) 10.1 8.3 7.5 7.1 6.7 BOXES P/PALLET 32 20 20 16 16 TOTAL UNITS PALLET WEIGHT P/PALLET (KG) 16000 335 2000 178 4000 162 1600 124 3200 117 SUPERNETTM SHORT RANGE & SHORT RANGE WITH DEFLECTOR Flowchart to determine the desired product definition How to use: To determine the desired product definition select one of every set of options displayed on the chart. EMITTER SuperNetTM SPN DISPERSION DEFLECTOR Short Range swivel SR Short Range with SRD deflector HEAD INLET CONNECTOR Barb BIC Press fit MIC Self tapping STIC 3/8" Male Threaded 3/8IC 1/2" Male Threaded 1/2IC UPPER BEARING EverspinTM ESUB Spring SPUB Standard Spring EverspinTM STUB SPES SPN FLOW 20 l/h 020 30 l/h 030 35 l/h 035 40 l/h 040 50 l/h 050 STAND ASSEMBLY Head only HEAD ONLY Head + 60 cm 60CM microtube + Stake W/STK Head + 60 cm microtube 60CM W/OSTK CONNECTOR TO LATERAL Barb BC Press fit PFC 3/8" conic 3/8C press fit 58 l/h 058 70 l/h 070 90 l/h 090 110 l/h 110 Head + 90 cm 90CM microtube + Stake W/STK Head + 90 cm microtube 90CM W/OSTK Head + XXX cm STL microtube + Stake W/STK Head + XXX cm microtube STL W/OSTK *When selecting an undefined tube length, add the desired length in writing. ACCESSORIES Stream splitter SP AD valve 1.5/0.7 AD15 bar AD valve 2.0/0.9 AD20 bar AD valve 3.0/1.5 AD30 bar AD valve 4.0/1.8 AD40 bar SPRINKLERS 2019 V1.0 SUPERNETTM SR & SRD 11 SUPERNETTM SR head only with Standard upper bearing Catalog number : 63500 - (any of below 6 digits) MODEL 020 030 035 040 050 058 070 090 110 BIC 022150 023450 024750 026050 027350 028650 029950 031250 STIC 074150 075450 075420 076750 078050 079350 080650 081950 083250 MIC 118500 119100 119700 120300 120900 121500 122100 122700 123300 3/8IC 106620 106750 106850 106950 107050 1/2IC 110050 110220 110250 110350 110550 110650 SuperNetTM SR BIC ,barb inlet connector SUPERNETTM SR head only with EverspinTM upper bearing Catalog number : 63500 - (any of below 6 digits) MODEL 020 030 035 040 050 058 070 090 110 BIC 026060 STIC 074152 075455 063800 076760 078060 079360 080660 081960 MIC 120306 3/8IC 106630 106970 107160 1/2IC 110255 110610 110660 110710 SUPERNETTM SR head only with Spring upper bearing Catalog number : 63500 - (any of below 6 digits) MODEL 020 030 035 040 050 058 070 090 110 BIC 023455 023456 024755 026055 027355 028655 029955 031260 STIC 075451 075421 076755 078055 079355 080655 081970 MIC 119103 119705 120303 120910 121510 122715 SUPERNETTM SR assembly stands Catalog number : 63500 - (any of below 6 digits) MODEL SPN SR STIC STUB XXX 60CM W/STK BC SPN SR STIC STUB XXX 60CM W/STK PFC SPN SR MIC STUB XXX 60CM W/STK BC SPN SR MIC STUB XXX 60CM W/STK PFC SPN SR BIC STUB XXX 60CM W/STK BC SPN SR BIC STUB XXX 60CM W/STK PFC SPN SR STIC STUB XXX 90CM W/STK BC SPN SR STIC STUB XXX 90CM W/STK PFC SPN SR MIC STUB XXX 90CM W/STK BC SPN SR MIC STUB XXX 90CM W/STK PFC SPN SR BIC STUB XXX 90CM W/STK BC SPN SR BIC STUB XXX 90CM W/STK PFC Catalog number : 63500 - (any of below 6 digits) MODEL SPN SR STIC STUB XXX 60CM W/OSTK BC SPN SR STIC STUB XXX 60CM W/OSTK PFC SPN SR MIC STUB XXX 60CM W/OSTK BC SPN SR MIC STUB XXX 60CM W/OSTK PFC SPN SR BIC STUB XXX 60CM W/OSTK BC SPN SR BIC STUB XXX 60CM W/OSTK PFC SPN SR STIC STUB XXX 90CM W/OSTK BC SPN SR STIC STUB XXX 90CM W/OSTK PFC SPN SR MIC STUB XXX 90CM W/OSTK BC SPN SR MIC STUB XXX 90CM W/OSTK PFC SPN SR BIC STUB XXX 90CM W/OSTK BC SPN SR BIC STUB XXX 90CM W/OSTK PFC 020 113830 030 075850 035 075425 075440 022550 023850 075430 022950 024250 020 030 035 075427 022350 023650 023430 023740 119720 0024260 040 025150 025180 077550 025610 040 076950 077350 050 078450 026450 050 078250 115655 026650 058 027750 058 027550 079950 070 081050 029050 070 080850 028850 029250 090 030250 090 110 083650 031650 110 Missing catalog numbers available upon request. Background color defines the code color of the respective swivel. All assembly stands include 4*6.5 mm black SPE micro-tube. Other stand combinations can be ordered based on the attached flowchart which can help determine the desired product requirement. 12 SUPERNETTM SR & SRD SPRINKLERS 2019 V1.0 SUPERNETTM SRD head only with Standard upper bearing Catalog number : 63500 - (any of below 6 digits) MODEL 020 030 035 040 050 058 070 090 110 BIC 033610 033850 032550 035150 036450 037750 039050 040350 041830 STIC 085610 085850 084550 087150 088450 089750 091050 092350 093650 MIC 118600 119200 119800 120400 121000 121600 122200 122800 123400 3/8IC 107350 107450 107520 107550 107650 107750 107850 107950 SUPERNETTM SRD head only with EverspinTM upper bearing Catalog number : 63500 - (any of below 6 digits) MODEL 020 030 035 040 050 058 070 090 110 BIC 037760 STIC 085615 085855 087110 087160 088460 089760 091060 MIC 119810 121610 122210 3/8IC 106570 107460 107560 107660 107760 107860 107960 1/2IC 111050 111150 111350 111450 1/2IC SuperNetTM SRD BIC , barb inlet connector SUPERNETTM SRD assembly stands Catalog number : 63500 - (any of below 6 digits) MODEL SPN SRD STIC STUB XXX 60CM W/STK BC SPN SRD STIC STUB XXX 60CM W/STK PFC SPN SRD MIC STUB XXX 60CM W/STK BC SPN SRD MIC STUB XXX 60CM W/STK PFC SPN SRD BIC STUB XXX 60CM W/STK BC SPN SRD BIC STUB XXX 60CM W/STK PFC SPN SRD STIC STUB XXX 90CM W/STK BC SPN SRD STIC STUB XXX 90CM W/STK PFC SPN SRD MIC STUB XXX 90CM W/STK BC SPN SRD MIC STUB XXX 90CM W/STK PFC SPN SRD BIC STUB XXX 90CM W/STK BC SPN SRD BIC STUB XXX 90CM W/STK PFC Catalog number : 63500 - (any of below 6 digits) MODEL SPN SRD STIC STUB XXX 60CM W/OSTK BC SPN SRD STIC STUB XXX 60CM W/OSTK PFC SPN SRD MIC STUB XXX 60CM W/OSTK BC SPN SRD MIC STUB XXX 60CM W/OSTK PFC SPN SRD BIC STUB XXX 60CM W/OSTK BC SPN SRD BIC STUB XXX 60CM W/OSTK PFC SPN SRD STIC STUB XXX 90CM W/OSTK BC SPN SRD STIC STUB XXX 90CM W/OSTK PFC SPN SRD MIC STUB XXX 90CM W/OSTK BC SPN SRD MIC STUB XXX 90CM W/OSTK PFC SPN SRD BIC STUB XXX 90CM W/OSTK BC SPN SRD BIC STUB XXX 90CM W/OSTK PFC 020 118655 032950 020 085620 118650 030 086250 119265 034250 034650 030 086050 119250 034050 033950 086260 035 035110 119870 035120 087120 035147 035 119850 040 087550 120470 035550 035630 087950 035950 040 087350 120450 035350 035750 050 088850 121010 036850 037250 050 088650 121050 036650 058 121615 038150 058 089950 121650 070 091450 122270 039450 039350 091850 039850 070 091250 122250 039250 090 092750 122870 040750 092900 041150 042260 090 122850 110 123470 042050 094860 042450 110 123450 041850 Missing catalog numbers available upon request. Background color defines the code color of the respective swivel. All assembly stands include 4*6.5 mm black SPE micro-tube. Other stand combinations can be ordered based on the attached flowchart which can help determine the desired product requirement. SPRINKLERS 2019 V1.0 SUPERNETTM SR & SRD 13 SUPERNETTM SSR SUPER SHORT RANGE APPLICATIONS Designed for permanent application in close proximity to trees. SPECIFICATIONS SSR means a revolving rotor irrigating a small sized area. Flow regulated micro-sprinkler, 3 different flow rates: 30, 35, 40 l/h. Flow rates within pressure range. Pressure range 1.5-4.0 bar. Recommended filtration: 200 micron / 80 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter. When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to NetafimTM expert team's instructions. 5 types of inlet connectors: Barb Self tapping Press fit 3/8" male threaded 1/2" male threaded 2 types of upper bearing: Standard - for normal water EverspinTM - for harsh condition The rotor is colored Light Green. SuperNetTM micro-sprinklers meet ISO 8026 standards (SI 1406) with production certified by the Israel Standards Institute (SII). FEATURES AND BENEFITS Unique regulation mechanism ensures even water and nutrients quantities per tree, uniform distribution and wetting diameter regardless of sprinkler's inlet pressures (within pressure range). Anti-ant mechanism prevents insect penetration into the area of the micro-sprinkler nozzle. Regulated micro-sprinkler made of plastic materials resistant to all agrochemicals & weather conditions. Water passage area 30% larger than in any other emitter with identical flow rate. The largest water passages on the market resists clogging. Specially designed for fruit trees, orchards, deciduous and other tree crops requiring efficient water distribution. Can be used in Frost mitigation and/or Cooling irrigation systems. Long-term reliable service, simple, modular parts, clog resistant design. 14 SUPERNETTM SSR SPRINKLERS 2019 V1.0 SUPERNETTM TECHNICAL DATA MODEL FLOW RATE REGULATION CHAMBER CODE COLOR (L/H)* 030 30 Brown 035 35 Light Blue 040 40 Blue *within working pressure range NOZZLE SIZE (MM) 1.14 1.20 1.28 WORKING PRESSURE RANGE (BAR) 1.5 - 4.0 1.5 - 4.0 1.5 - 4.0 CONSTANT K 30 35 40 EXPONENT* X 0 0 0 WETTED DIAMETER (M) SSR MODEL 20 CM ABOVE GROUND SSR MODEL 300 CM ABOVE GROUND 2.0 3.0 2.0 3.0 2.5 3.0 SWIVEL (ROTOR) CODE COLOR Light Green Light Green Light Green PACKAGING DATA SUPERNETTM SSR Head only Complete stand , 60 cm micro tube length ,w/stake Complete stand , 60 cm micro tube length ,w/o stake Complete stand , 90 cm micro tube length ,w/stake Complete stand , 90 cm micro tube length ,w/o stake QUANTITY P/BOX UNITS 500 100 200 100 200 BOX SIZE (CM X CM X CM) 28 x 28 x 57 18 x 34 x 79 18 x 34 x 79 28 x 27 x 113 28 x 27 x 113 BOX WEIGHT (KG) 10.1 8.3 7.5 7.1 6.7 BOXES P/PALLET 32 20 20 16 16 TOTAL UNITS PALLET WEIGHT P/PALLET (KG) 16000 335 2000 178 4000 162 1600 124 3200 117 SUPERNETTM SSR Flowchart to determine the desired product definition How to use: To determine the desired product definition select one of every set of options displayed on the chart. EMITTER SuperNetTM SPN DISPERSION DEFLECTOR Super Short Range swivel SSR HEAD INLET CONNECTOR Barb BIC Press fit MIC Self tapping STIC 3/8" Male Threaded 3/8IC 1/2" Male Threaded 1/2IC UPPER BEARING EverspinTM ESUB Standard STUB FLOW 30 l/h 030 35 l/h 035 40 l/h 040 STAND ASSEMBLY Head only HEAD ONLY Head + 60 cm 60CM microtube + Stake W/STK Head + 60 cm microtube 60CM W/OSTK CONNECTOR TO LATERAL Barb BC Press fit PFC 3/8" conic 3/8C press fit Head + 90 cm 90CM microtube + Stake W/STK ACCESSORIES AD valve 1.5/0.7 bar AD valve 2.0/0.9 bar AD valve 3.0/1.5 bar AD valve 4.0/1.8 bar AD15 AD20 AD30 AD40 Head + 90 cm microtube 90CM W/OSTK Head + XXX cm STL microtube + Stake W/STK Head + XXX cm microtube STL W/OSTK *When selecting an undefined tube length, add the desired length in writing. SPN SSR SUPERNETTM SSR head only with Standard upper bearing Catalog number : 63500 - (any of below 6 digits) MODEL 030 035 040 BIC 157500 STIC 151000 152000 MIC 156000 3/8IC 106622 106752 Missing catalog numbers available upon request. Background color defines the code color of the respective swivel. Stand combinations can be ordered based on the attached flowchart which can help determine the desired product requirement. SPRINKLERS 2019 V1.0 SUPERNETTM SSR 15 SUPERNETTM UD UPSIDE DOWN APPLICATIONS For application where sprinklers are mounted inverted to keep the ground clear and prevent damage to the sprinklers by harvesters and machinery. SPECIFICATIONS Special designed upside down down rotor. Flow regulated micro-sprinkler, 7 different flow rates: 30, 35, 40, 50, 58, 70, 90 l/h. Flow rates within pressure range. Pressure range 1.5-4.0 bar. Recommended filtration: 200 micron / 80 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter. When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to NetafimTM expert team's instructions. 5 types of inlet connectors: Barb Self tapping Press fit 3/8" male threaded 1/2" male threaded Upper bearing: A specially designed spring bearing keeps the anti-ant feature even when the sprinkler is mounted in an upside down position. A spring bearing with EverspinTM feature to improve wear resistance also in harsh conditions. The rotor is colored Green. SuperNetTM micro-sprinklers meet ISO 8026 standards (SI 1406) with production certified by the Israel Standards Institute (SII). FEATURES AND BENEFITS Unique regulation mechanism ensures even water and nutrients quantities per tree, uniform distribution and wetting diameter regardless of sprinkler's inlet pressures (within pressure range). Anti-ant mechanism prevents insect penetration into the area of the sprinklers nozzle. Regulated micro-sprinkler made of plastic materials resistant to all agrochemicals & weather conditions. Water passage area 30% larger than in any other emitter with identical flow rate. The largest water passages on the market resists clogging. Specially designed for fruit trees, orchards, deciduous and other tree crops requiring efficient water distribution. Can be used in Frost mitigation and/or Cooling irrigation systems. Long-term reliable service, simple, modular parts, clog resistant design. 16 SUPERNETTM UD SPRINKLERS 2019 V1.0 SUPERNETTM TECHNICAL DATA MODEL FLOW RATE REGULATION CHAMBER CODE COLOR NOZZLE SIZE WORKING PRESSURE RANGE (L/H)* (MM) 030 30 Brown 1.14 035 35 Light Blue 1.20 040 40 Blue 1.28 050 50 Green 1.43 058 58 Gray 1.55 070 70 Black 1.73 090 90 Orange 1.74 * within working pressure range (BAR) 1.5 - 4.0 1.5 - 4.0 1.5 - 4.0 1.5 - 4.0 1.5 - 4.0 1.5 - 4.0 1.5 - 4.0 CONSTANT K 30 35 40 50 58 70 90 EXPONENT* X 0 0 0 0 0 0 0 WETTED DIAMETER (M) 50 CM ABOVE CROP UD MODEL 6.0 6.0 6.5 6.5 7.0 7.0 7.0 SWIVEL (ROTOR) CODE COLOR UD MODEL Green Green Green Green Green Green Green WETTED DIAMETER (M) 50 CM ABOVE CROP SR MODEL IN UD POSITION 3.5 4.0 4.0 4.0 4.0 4.0 4.0 SWIVEL (ROTOR) CODE COLOR SR MODEL Blue Blue Blue Blue Blue Blue Blue PACKAGING DATA SUPERNETTM UD QUANTITY P/BOX UNITS Head only 500 Complete stand, 30 cm tube length with stabilizer 150 Complete stand, 60 cm tube length with stabilizer 150 Complete stand, 90 cm tube length with stabilizer 150 BOX SIZE (CM X CM X CM) 28 x 28 x 57 28 x 28 x 57 18 x 34 x 79 28 x 27 x 113 BOX WEIGHT (KG) 10.1 10.7 11.8 12.4 BOXES P/PALLET 32 32 20 16 TOTAL UNITS P/PALLET 16000 4800 3000 2400 PALLET WEIGHT (KG) 335 342 236 198 SUPERNETTM UD Flowchart to determine the desired product definition How to use: To determine the desired product definition select one of every set of options displayed on the chart. EMITTER SuperNetTM SPN DISPERSION DEFLECTOR Up-side down swivel UD Short range swivel SR HEAD INLET CONNECTOR Barb BIC Press fit MIC Self tapping STIC 3/8" Male Threaded 3/8IC 1/2" Male Threaded 1/2IC UPPER BEARING Spring SPUB Standard Spring EverspinTM STUB SPES FLOW 30 l/h 030 35 l/h 035 40 l/h 040 50 l/h 050 58 l/h 058 70 l/h 070 90 l/h 090 STAND ASSEMBLY Head only Head + 60 cm microtube HEAD ONLY 60CM W/OSTK Head + 90 cm microtube 90CM W/OSTK Head + XXX cm microtube STL W/OSTK *When selecting an undefined tube length, add the desired length in writing. CONNECTOR TO LATERAL Barb BC Press fit PFC 3/8" conic 3/8C press fit ACCESSORIES AD valve 1.5/0.7 bar AD valve 2.0/0.9 bar AD valve 3.0/1.5 bar AD valve 4.0/1.8 bar AD15 AD20 AD30 AD40 SPN SPRINKLERS 2019 V1.0 SUPERNETTM UD 17 SUPERNETTM UD head only with Standard upper bearing Catalog number : 63500 - (any of below 6 digits) MODEL 030 035 040 050 058 070 090 BIC 189990 190990 192990 193990 STIC 184990 MIC 171990 174990 175990 SUPERNETTM UD head only with Spring upper bearing Catalog number : 63500 - (any of below 6 digits) MODEL 030 035 040 050 058 070 090 BIC 189000 190000 191000 192000 193000 194000 195000 STIC 180000 181000 182000 183000 184000 185000 186000 MIC 171000 172000 173000 174000 175000 176000 SuperNetTM UD MIC , male press-fit inlet connector SUPERNETTM UD assembly stands Catalog number : 63500 - (any of below 6 digits) MODEL 030 035 040 050 058 070 090 SPN UD STIC SPUB XXX 30CM W/STB BC SPN UD STIC SPUB XXX 60CM W/STB BC SPN UD STIC SPUB XXX 90CM W/STB BC SPN UD BIC SPUB XXX 30CM W/STB BC SPN UD BIC SPUB XXX 60CM W/STB BC SPN UD BIC SPUB XXX 90CM W/STB BC SPN UD MIC SPUB XXX 30CM W/STB BC SPN UD MIC SPUB XXX 60CM W/STB BC SPN UD MIC SPUB XXX 90CM W/STB BC 180100 180300 180500 189010 181250 190010 172020 172100 182050 182150 182250 192010 174100 Missing catalog numbers available upon request. Background color defines the code color of the respective swivel. All assembly stands include 4*6.5 mm black SPE micro-tube. Other stand combinations can be ordered based on the attached flowchart which can help determine the desired product requirement. 18 SUPERNETTM UD SPRINKLERS 2019 V1.0 Missing catalog numbers available upon request. Background color defines the code color of the respective swivel. All assembly stands include 4*6.5 mm black SPE micro-tube. Other stand combinations can be ordered based on the attached flowchart which can help determine the desired product requirement. SPRINKLERS 2019 V1.0 SUPERNETTM UD 19 SUPERNETTM GS FULL FIELD OVERLAP APPLICATIONS For crops covering the entire field where full-coverage highly uniform irrigation is required. SPECIFICATIONS GS means a revolving rotor designed to provide a wetting pattern that achieves excellent distribution uniformity and full coverage. Flow regulated micro-sprinkler, 2 different flow rates: 90,110 l/h. Flow rates within pressure range. Pressure range 2.0-4.0 bar. Recommended filtration: 200 micron / 80 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter. When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to NetafimTM expert team's instructions. 5 types of inlet connectors: Barb Self tapping Press fit 3/8" male threaded 1/2" male threaded 2 types of upper bearing: Standard - for normal water EverspinTM - for harsh condition The rotor is colored Gray. SuperNetTM micro-sprinklers meet ISO 8026 standards (SI 1406) with production certified by the Israel Standards Institute (SII). FEATURES AND BENEFITS Unique regulation mechanism ensures even water and nutrients quantities, uniform distribution and wetting diameter regardless of sprinkler's inlet pressures (within pressure range). Anti-ant mechanism prevents insect penetration into the area of the micro-sprinkler nozzle. Regulated micro-sprinkler made of plastic materials resistant to all agrochemicals & weather conditions. Water passage area 30% larger than in any other emitter with identical flow rate. The largest water passages on the market resists clogging. Specially designed for crops where full-coverage highly uniform irrigation is required. Can be used in Frost mitigation and/or Cooling irrigation systems. Long-term reliable service, simple, modular parts, clog resistant design. 20 SUPERNETTM GS SPRINKLERS 2019 V1.0 SUPERNETTM TECHNICAL DATA MODEL 090 110 FLOW RATE (L/H)* 90 110 REGULATION CHAMBER CODE COLOR Orange Red * within working pressure range NOZZLE SIZE (MM) 1.74 1.70 WORKING PRESSURE RANGE (BAR) 2.0 - 4.0 2.0 - 4.0 CONSTANT EXPONENT* K X 90 0 110 0 WETTED DIAMETER (M) GS 100 CM ABOVE GROUND 7.5 8.0 SWIVEL (ROTOR) CODE COLOR Light Gray Light Gray PACKAGING DATA SUPERNETTM GS QUANTITY P/BOX BOX SIZE UNITS (CM X CM X CM) Head only 500 Complete stand , 60 cm micro tube length ,w/stake 100 Complete stand , 60 cm micro tube length ,w/o stake 200 Complete stand , 90 cm micro tube length ,w/stake 100 Complete stand , 90 cm micro tube length ,w/o stake 200 28 x 28 x 57 18 x 34 x 79 18 x 34 x 79 28 x 27 x 113 28 x 27 x 113 BOX WEIGHT (KG) 10.1 8.3 7.5 7.1 6.7 BOXES P/PALLET 32 20 20 16 16 TOTAL UNITS PALLET WEIGHT P/PALLET (KG) 16000 335 2000 178 4000 162 1600 124 3200 117 SUPERNETTM GS Flowchart to determine the desired product definition How to use: To determine the desired product definition select one of every set of options displayed on the chart. EMITTER SuperNetTM SPN DISPERSION DEFLECTOR Gray swivel GS HEAD INLET CONNECTOR Barb BIC Press fit MIC Self tapping STIC 3/8" Male Threaded 3/8IC 1/2" Male Threaded 1/2IC UPPER BEARING EverspinTM ESUB Standard STUB FLOW STAND ASSEMBLY 90 l/h 090 110 l/h 110 Head only Head + 60 cm microtube Head + 90 cm microtube Head + XXX cm microtube HEAD ONLY 60CM W/OSTK 90CM W/OSTK STL W/OSTK *When selecting an undefined tube length, add the desired length in writing. CONNECTOR TO LATERAL Barb BC Press fit 3/8" conic press fit PFC 3/8C ACCESSORIES AD valve 1.5/0.7 bar AD valve 2.0/0.9 bar AD valve 3.0/1.5 bar AD valve 4.0/1.8 bar AD15 AD20 AD30 AD40 SPN GS SUPERNETTM GS head only with Standard upper bearing Catalog number : 63500 - (any of below 6 digits) MODEL 090 110 BIC 043900 STIC 095700 096000 MIC 136000 137000 3/8IC 163000 SUPERNETTM GS assembly stands Catalog number : 63500 - (any of below 6 digits) MODEL SPN GS BIC STUB XXX 120CM W/OSTK PFC SPN GS MIC STUB XXX 120CM W/OSTK PFC SPN GS STIC STUB XXX 120CM W/OSTK PFC 090 043660 1/2IC 166000 110 043960 SuperNetTM GS, 1/2" male threaded inlet connector Missing catalog numbers available upon request. Background color defines the code color of the respective swivel. All assembly stands include 4*6.5 mm black SPE micro-tube. Other stand combinations can be ordered based on the attached flowchart which can help determine the desired product requirement. SPRINKLERS 2019 V1.0 SUPERNETTM GS 21 SUPERNETTM JET APPLICATIONS The SuperNetTM Jet is designed for harsh water containing large amounts of sand thus causing excessive wear of standard rotating swivel. SPECIFICATIONS A static pressure compensated emitter. Flow regulated micro-emitter, 7 different flow rates: 30, 35, 40, 50, 58, 70, 90 l/h. Flow rates within pressure range. Pressure range 1.5-4.0 bar. Recommended filtration: 200 micron / 80 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter. When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to NetafimTM expert team's instructions. 5 types of inlet connectors: Barb Self tapping Press fit 3/8" male threaded 1/2" male threaded Upper bearing: Special type of upper bearing (square hole) holds the rotor from spinning. 6 types of static deflectors: 360 degrees (12 jets ) 300 degrees (10 Jets) 2x90 (butterfly) (8 jets) 180 degrees (6 jets) 90 degrees (4 jets) FS flat spray deflector All deflectors are colored Orange. SuperNetTM micro-sprinklers meet ISO 8026 standards (SI 1406) with production certified by the Israel Standards Institute (SII). FEATURES AND BENEFITS Unique regulation mechanism ensures even water and nutrients quantities per tree, and wetting diameter regardless of sprinkler's inlet pressures (within pressure range). Anti-ant mechanism prevents insect penetration into the area of the micro-emitter nozzle. Regulated emitter made of plastic materials resistant to all agrochemicals & weather conditions. Water passage area 30% larger than in any other emitter with identical flow rate. The largest water passages on the market resists clogging. Specially designed for fruit trees, orchards, deciduous and other tree crops. Long-term reliable service, simple, modular parts, clog resistant design. 22 SUPERNE TTM JET SPRINKLERS 2019 V1.0 SUPERNETTM TECHNICAL DATA MODEL FLOW RATE (L/H)* REGULATION CHAMBER CODE COLOR NOZZLE SIZE (MM) WORKING PRESSURE RANGE (BAR) 360 DEGREES 12 JETS WETTED RADIUS (M) 20 CM ABOVE GROUND 300 DEGREES - BUTTERFLY - 180 DEGREES - 90 DEGREES - 10 JETS 2*4 JETS 6 JETS 4 JETS 030 30 Brown 1.14 1.5 - 4.0 1.9 1.7 1.7 2.8 2.2 035 35 Light Blue 1.20 1.5 - 4.0 2.3 2.2 2.0 2.8 2.3 040 40 Blue 1.28 1.5 - 4.0 2.7 2.7 2.2 2.8 2.4 050 50 Green 1.43 1.5 - 4.0 2.8 2.7 2.2 2.8 2.6 058 58 Gray 1.55 1.5 - 4.0 2.8 2.9 2.5 3.1 2.9 070 70 Black 1.73 1.5 - 4.0 2.9 2.9 2.5 3.1 2.9 090 90 Orange 1.74 1.5 - 4.0 2.9 2.9 2.5 3.1 2.9 FLAT SPRAY 1.6 1.7 2.0 N/A N/A N/A N/A DEFLECTOR CODE COLOR Orange Orange Orange Orange Orange Orange Orange * within working pressure range PACKAGING DATA SUPERNETTM JET QUANTITY P/BOX BOX SIZE UNITS (CM X CM X CM) Head only 500 28 x 28 x 57 Complete stand , 60 cm micro tube length ,w/stake 100 18 x 34 x 79 Complete stand , 60 cm micro tube length ,w/o stake 200 18 x 34 x 79 Complete stand , 90 cm micro tube length ,w/stake 100 28 x 27 x 113 Complete stand , 90 cm micro tube length ,w/o stake 200 28 x 27 x 113 BOX WEIGHT (KG) 10.1 8.3 7.5 7.1 6.7 BOXES P/PALLET 32 20 20 16 16 TOTAL UNITS PALLET WEIGHT P/PALLET (KG) 16000 335 2000 178 4000 162 1600 124 3200 117 SUPERNETTM JET Flowchart to determine the desired product definition How to use: To determine the desired product definition select one of every set of options displayed on the chart. EMITTER SuperNetTM SPN DISPERSION DEFLECTOR 12 jets , 360 degrees 12J 10 jets , 300 degrees 10J 8 jets , 2 x 90 degrees 8J 6 jets , 180 degrees 6J 4 jets , 90 degrees 4J Flat spray FS HEAD INLET CONNECTOR Barb BIC Press fit MIC Self tapping STIC 3/8" Male Threaded 3/8IC 1/2" Male Threaded 1/2IC UPPER BEARING Standard STUB SPN STUB FLOW 30 l/h 030 35 l/h 035 40 l/h 040 50 l/h 050 58 l/h 058 70 l/h 070 90 l/h 090 STAND ASSEMBLY Head only HEAD ONLY Head + 60 cm 60CM microtube + Stake W/STK Head + 60 cm microtube 60CM W/OSTK CONNECTOR TO LATERAL Barb BC Press fit PFC 3/8" conic 3/8C press fit Head + 90 cm 90CM microtube + Stake W/STK Head + 90 cm microtube 90CM W/OSTK Head + XXX cm STL microtube + Stake W/STK Head + XXX cm microtube STL W/OSTK *When selecting an undefined tube length, add the desired length in writing. ACCESSORIES AD valve 1.5/0.7 bar AD valve 2.0/0.9 bar AD valve 3.0/1.5 bar AD valve 4.0/1.8 bar AD15 AD20 AD30 AD40 SPRINKLERS 2019 V1.0 SUPERNE TTM JET 23 SUPERNETTM JET 12 Jet , head only with Standard upper bearing Catalog number : 63500 - (any of below 6 digits) MODEL 030 035 040 050 058 070 090 BIC 044710 045550 049450 050750 STIC 096250 096910 097550 098850 100150 101450 102750 MIC 124800 125200 125800 126400 127600 SUPERNETTM JET 10 Jet , head only with Standard upper bearing Catalog number : 63500 - (any of below 6 digits) MODEL 030 035 040 050 058 070 090 BIC 044715 049455 STIC 097555 MIC 125610 126410 SUPERNETTM JET 8 (2*90) Jet , head only with Standard upper bearing Catalog number : 63500 - (any of below 6 digits) MODEL 030 035 040 050 058 070 090 BIC 044260 045560 049460 STIC 096260 096920 097560 101475 MIC 124620 126420 SUPERNETTM JET 6 Jet , head only with Standard upper bearing Catalog number : 63500 - (any of below 6 digits) MODEL 030 035 040 050 058 070 090 BIC 044730 045570 046870 048170 049470 050770 STIC 096270 096930 097570 100170 101470 102770 MIC 125650 125850 126430 127640 SUPERNETTM JET 4 Jet , head only with Standard upper bearing Catalog number : 63500 - (any of below 6 digits) MODEL 030 035 040 050 058 070 090 BIC 044725 045565 046865 049465 STIC 096265 097565 098875 101465 102765 MIC 124640 125840 126425 127630 Missing catalog numbers available upon request SuperNetTM BIC, barb inlet connector SuperNetTM STIC , self tapping inlet connector SuperNetTM MIC , male press-fit inlet connector SUPERNETTM JET FS (FLAT SPRAY) Head only with Standard upper bearing Catalog number : 63500 - (any of below 6 digits) MODEL 030 035 040 BIC 199000 STIC 197000 MIC 198000 24 SUPERNE TTM JET SPRINKLERS 2019 V1.0 SUPERNETTM JET assembly stands Catalog number : 63500 - (any of below 6 digits) MODEL SPNJET 12J BIC XXX 60CM W/STK BC SPNJET 12J STIC XXX 60CM W/STK BC SPNJET 12J MIC XXX 60CM W/STK BC SPNJET 12J BIC XXX 60CM W/STK PFC SPNJET 12J STIC XXX 60CM W/STK PFC SPNJET 12J MIC XXX 60CM W/STK PFC SPNJET 10J BIC XXX 60CM W/STK BC SPNJET 10J STIC XXX 60CM W/STK BC SPNJET 10J MIC XXX 60CM W/STK BC SPNJET 10J BIC XXX 60CM W/STK PFC SPNJET 10J STIC XXX 60CM W/STK PFC SPNJET 10J MIC XXX 60CM W/STK PFC SPNJET 8J BIC XXX 60CM W/STK BC SPNJET 8J STIC XXX 60CM W/STK BC SPNJET 8J MIC XXX 60CM W/STK BC SPNJET 8J BIC XXX 60CM W/STK PFC SPNJET 8J STIC XXX 60CM W/STK PFC SPNJET 8J MIC XXX 60CM W/STK PFC SPNJET 6J BIC XXX 60CM W/STK BC SPNJET 6J STIC XXX 60CM W/STK BC SPNJET 6J MIC XXX 60CM W/STK BC SPNJET 6J BIC XXX 60CM W/STK PFC SPNJET 6J STIC XXX 60CM W/STK PFC SPNJET 6J MIC XXX 60CM W/STK PFC SPNJET 4J BIC XXX 60CM W/STK BC SPNJET 4J STIC XXX 60CM W/STK BC SPNJET 4J MIC XXX 60CM W/STK BC SPNJET 4J BIC XXX 60CM W/STK PFC SPNJET 4J STIC XXX 60CM W/STK PFC SPNJET 4J MIC XXX 60CM W/STK PFC Catalog number : 63500 - (any of below 6 digits) MODEL SPNJET 12J BIC XXX 60CM W/OSTK BC SPNJET 12J STIC XXX 60CM W/OSTK BC SPNJET 12J MIC XXX 60CM W/OSTK BC SPNJET 12J BIC XXX 60CM W/OSTK PFC SPNJET 12J STIC XXX 60CM W/OSTK PFC SPNJET 12J MIC XXX 60CM W/OSTK PFC SPNJET 10J BIC XXX 60CM W/OSTK BC SPNJET 10J STIC XXX 60CM W/OSTK BC SPNJET 10J MIC XXX 60CM W/OSTK BC SPNJET 10J BIC XXX 60CM W/OSTK PFC SPNJET 10J STIC XXX 60CM W/OSTK PFC SPNJET 10J MIC XXX 60CM W/OSTK PFC SPNJET 6J BIC XXX 60CM W/OSTK BC SPNJET 6J STIC XXX 60CM W/OSTK BC SPNJET 6J MIC XXX 60CM W/OSTK BC SPNJET 6J BIC XXX 60CM W/OSTK PFC SPNJET 6J STIC XXX 60CM W/OSTK PFC SPNJET 6J MIC XXX 60CM W/OSTK PFC 030 035 040 050 058 070 045950 096310 097020 097950 099250 044267 124635 046890 097590 097567 030 035 040 050 058 070 044273 045750 097750 126500 096300 097000 097700 099000 100250 101550 096350 096340 045573 Missing catalog numbers available upon request. Background color defines the code color of the respective deflector. All assembly stands include 4*6.5 mm black SPE micro-tube. Other stand combinations can be ordered based on the attached flowchart which can help determine the desired product requirement. 090 051150 104010 090 102850 SPRINKLERS 2019 V1.0 SUPERNE TTM JET 25 SUPERNETTM JET 20 APPLICATIONS The SuperNetTM Jet 20 is designed for harsh water, containing large amounts of sand thus causing excessive wear of standard rotating swivel. It's internal shape, has special design allowing the micro-emitter to work in low flow rate. FEATURES AND BENEFITS Achieves optimal results in a varied topography area Thanks to its unique regulation mechanism, the SuperNetTM JET 20 ensures uniform water and nutrient distribution around the tree, regardless of sprinkler's inlet pressures (within pressure range). Reduces maintenance and repair costs SuperNetTM Jet 20 is designed to work with harsh water and low flow requirements. The SuperNetTM JET 20 has anti-ant mechanism preventing insect penetration into the area of the micro-sprinkler nozzle. The regulated micro-sprinkler is made of plastic materials resistant to all agrochemicals & weather conditions. Offers higher reliability & longevity Long-term reliable service, simple, modular parts, clog resistant design. Suitable for diverse applications Specially designed for fruit trees, orchards, deciduous and other tree crops. Long-term reliable service, simple, modular parts, clog resistant design. SPECIFICATIONS A static pressure compensated emitter. Flow regulated micro-emitter, with flow rate of 20 l/h, within pressure range. Pressure range 1.5-4.0 bar. Recommended filtration: 200 micron / 80 mesh. Filtration method is to be selected based on the type and concentration of the dirt particles existing in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydro-cyclone filter is to be installed before the main filter. When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to NetafimTM expert team's instructions. 3 types of inlet connectors: Barb Self tapping Press fit Upper bearing: Special type of upper bearing (square hole) holds the rotor from spinning. 3 types of static deflectors: 180 degrees (6 jets) 90 degrees (4 jets) FS flat spray deflector For All the 3 models, the nozzle tube is colored gray, and the deflectors are colored Orange. SuperNetTM micro-sprinklers meet ISO 8026 standards (SI 1406) with production certified by the Israel Standards Institute (SII). 26 SUPERNETTM JET 20 SPRINKLERS 2019 V1.0 SUPERNETTM JET 20 TECHNICAL DATA MODEL FLOW RATE NOZZLE TUBE CODE COLOR NOZZLE SIZE (L/H)* 020 20 *within working pressure range Gray (MM) 0.68 WORKING PRESSURE RANGE (BAR) 1.5-4.0 WETTED DIAMETER (M) 180 DEGREES 6 JETS 20 CM ABOVE GROUND 90 DEGREES 4 JETS 20 CM ABOVE GROUND FLAT SPRAY 20 CM ABOVE GROUND 2.1 2.0 1.6 DEFLECTOR CODE COLOR Orange PACKAGING DATA SUPERNETTM JET 20 Head only QUANTITY P/BOX BOX SIZE UNITS (CM X CM X CM) 500 28 x 28 x 57 BOX WEIGHT (KG) 10.1 BOXES P/PALLET 32 TOTAL UNITS P/PALLET 16000 PALLET WEIGHT (KG) 335 SUPERNETTM JET 20 Flowchart to determine the desired product definition How to use: To determine the desired product definition select one of every set of options displayed on the chart. EMITTER SuperNetTM SPN DISPERSION DEFLECTOR 6 jets, 180 degrees 6J 4 jets, 90 degrees 4J Flat spray FS HEAD INLET CONNECTOR Self tapping STIC Press fit MIC Barb BIC UPPER BEARING Standard STUB SPN STUB FLOW 20 l/h 020 STAND ASSEMBLY Head only HEAD ONLY Head + 60 cm 60CM microtube + Stake W/STK Head + 60 cm microtube 60CM W/OSTK CONNECTOR TO LATERAL Barb BC Press fit PFC 3/8" conic 3/8C press fit Head + 90 cm 90CM microtube + Stake W/STK Head + 90 cm microtube 90CM W/OSTK Head + XXX cm STL microtube + Stake W/STK Head + XXX cm microtube STL W/OSTK *When selecting an undefined tube length, add the desired length in writing. ACCESSORIES AD valve 1.5/0.7 bar AD valve 2.0/0.9 bar AD valve 3.0/1.5 bar AD valve 4.0/1.8 bar AD15 AD20 AD30 AD40 SPRINKLERS 2019 V1.0 SUPERNETTM JET 20 27 SUPERNETTM COMPONENTS STANDARD UPPER BEARING CIRCULAR HOLE - TO BE USED ON ALL SUPERNETTM MICRO- SPRINKLERS 1 unit 63520-005450 100 units/bag 63520 -005470 STANDARD UPPER BEARING SQUARE HOLE - TO BE USED ON ALL SUPERNETTM MICRO-JETS (GRAY) 1 unit 63520-005400 100 units/bag 63520-005420 EVERSPINTM UPPER BEARING CIRCULAR HOLE - TO BE USED ON ALL SUPERNETTM MICRO- SPRINKLERS IN HARSH WATER CONDITIONS 1 unit 63520-011400 100 units/bag 63520-011425 FRAME 1 unit 63520-005500 10 units/bag 63520-005525 100 units/bag 63520-005510 LR SWIVEL (PURPLE) TO BE USED WITH 20, 30, 35 AND 40 L/H 1 unit 63520-005100 10 units/bag 63520-005102 100 units/bag 63520-005115 LRD SWIVEL (PURPLE) TO BE USED WITH 20, 30, 35 AND 40 L/H 1 unit 63520-005160 10 units/bag 63520-005165 100 units/bag 63520-005170 UD SWIVEL (GREEN) W/SLEEVE TO BE USED WITH 30, 35, 40, 50, 58 AND 70 L/H 1 unit 63520-005180 10 units/bag 63520-005185 100 units/bag 63520-005188 STATIC DEFLECTORS TO BE USED WITH 30, 35, 40, 50, 58, 70 AND 90 L/H STREAM SPLITTER 1 unit 63520-005800 10 units/bag 100 units/bag 63520-005830 LR SWIVEL (BLACK) TO BE USED WITH 50, 58, 70, 90 AND 110L/H 1 unit 63520-005000 10 units/bag 63520-005005 100 units/bag 63520-005010 LRD SWIVEL (BLACK) TO BE USED WITH 50, 58, 70, 90 AND 110L/H 1 unit 63520-005150 10 units/bag 100 units/bag 63520-005155 LR SWIVEL (GRAY) TO BE USED WITH GS MODEL 90 AND 110 L/H 1 unit 63520-005120 10 units/bag 63520-005122 100 units/bag 63520-005125 SPRING UPPER BEARING CIRCULAR HOLE - TO BE USED ON UD SUPERNETTM MICRO- SPRINKLERS 1 unit 63520-011500 100 units/bag 63520-011530 SPRING EVERSPINTM UPPER BEARING - TO BE USED ON UD SUPERNETTM MICROSPRINKLERS IN HARSH WATER CONDITIONS 1 unit 63520-011300 100 units/bag SR SWIVEL (BLUE) TO BE USED WITH ALL FLOWS 1 unit 63520-005200 10 units/bag 63520-005205 100 units/bag 63520-005220 SRD SWIVEL (BLUE) TO BE USED WITH ALL FLOWS 1 unit 63520-005300 10 units/bag 100 units/bag 63520-005310 SSR SWIVEL (LIGHT GREEN) TO BE USED WITH 30 , 35 AND 40 L/H 1 unit 63520-005320 10 units/bag 100 units/bag 63520-005340 1 unit 12 jets (360 degrees) 63520-005350 10 jets (300 degrees) 63520-005360 8 jets (2*90 degrees) 63520-005370 6 jets (180 degrees) 63520-005380 4 jets (90 degrees) 63520-005390 FS, flat spray 63520-005392 Missing catalog numbers available upon request 28 100 units/bag 63520-005355 63520-005365 63520-005375 63520-005385 63520-005397 SUPERNETTM COMPONENTS SPRINKLERS 2019 V1.0 SUPERNETTM COMPONENTS NOZZLE TUBE 20 l/h 30 l/h 35 l/h 40 l/h 50 l/h 58 l/h 70 l/h 90 l/h 110 l/h 63520-001000 63520-001100 63520-001150 63520-001200 63520-001300 63520-001400 63520-001500 63520-001600 63520-001700 FLOW CONTROL CHAMBER WITH BARB INLET CONNECTOR 20 l/h 30 l/h 35 l/h 40 l/h 50 l/h 58 l/h 70 l/h 90 l/h 110 l/h 63520-001800 63520-002200 63520-002510 63520-002600 63520-003000 63520-003400 63520-003800 63520-004200 63520-004600 Purple Brown Light Blue Blue Green Gray Black Orange Red FLOW CONTROL CHAMBER WITH SELF TAPPING INLET CONNECTOR 20 l/h 30 l/h 35 l/h 40 l/h 50 l/h 58 l/h 70 l/h 90 l/h 110 l/h 63520-001900 63520-002300 63520-002520 63520-002700 63520-003100 63520-003500 63520-003900 63520-004300 63520-004700 Purple Brown Light Blue Blue Green Gray Black Orange Red FLOW CONTROL CHAMBER WITH MALE PRESS-FIT INLET CONNECTOR 20 l/h 30 l/h 35 l/h 40 l/h 50 l/h 58 l/h 70 l/h 90 l/h 110 l/h 63520-001750 63520-002150 63520-002505 63520-002570 63520-002950 63520-003350 63520-003750 63520-004150 63520-004550 Purple Brown Light Blue Blue Green Gray Black Orange Red FLOW CONTROL CHAMBER WITH 3/8" MALE THREADED INLET CONNECTOR 20 l/h 30 l/h 35 l/h 40 l/h 50 l/h 58 l/h 70 l/h 90 l/h 110 l/h 63520-002000 63520-002400 63520-002530 63520-002800 63520-003200 63520-003600 63520-004000 63520-004400 63520-004800 Purple Brown Light Blue Blue Green Gray Black Orange Red Missing catalog numbers available upon request DIAPHRAGM 1 unit 63520-005630 100 units/bag "O" RING 1 unit 63520-005700 100 units/bag 63520-005720 FLOW CONTROL CHAMBER WITH BARB INLET CONNECTOR + ASSEMBLY "O" RING 20 l/h 63520-004912 30 l/h 63520-004925 35 l/h 40 l/h 50 l/h 63520-004952 58 l/h 70 l/h 90 l/h 110 l/h Purple Brown Green FLOW CONTROL CHAMBER WITH SELF TAPPING INLET CONNECTOR + ASSEMBLY "O" RING 20 l/h 30 l/h 35 l/h 40 l/h 50 l/h 58 l/h 70 l/h 90 l/h 110 l/h 63520-004910 63520-004920 63520-004930 63520-004940 63520-004950 63520-004960 63520-004970 63520-004980 63520-004990 Purple Brown Light Blue Blue Green Gray Black Orange Red NOZZLE TUBE JET 20 GRAY 1 unit 63520-00090 FLOW CONTROL CHAMBER WITH 1/2" MALE THREADED INLET CONNECTOR 20 l/h 30 l/h 35 l/h 40 l/h 50 l/h 58 l/h 70 l/h 90 l/h 110 l/h 63520-002100 63520-002500 63520-002550 63520-002900 63520-003300 63520-003700 63520-004100 63520-004500 63520-004900 Purple Brown Light Blue Blue Green Gray Black Orange Red SPRINKLERS 2019 V1.0 SUPERNETTM COMPONENTS 29 STRIPNETTM PRO PRESSURE-COMPENSATED, STRIP EMITTER APPLICATIONS Strip frost mitigation on vineyards. Cooling of trellised crops. SPECIFICATIONS Pressure compensated static emitter. Pressure regulating range: 2.0-4.0 bar. Rectangular water covering pattern: 0.5 meters wide by 5.5 meters long. Inlet connectors: barb. Recommended filtration: 130 micron / 120 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter. When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to NetafimTM expert team's instructions. Maximum recommended distance between heads: 5.0 meters. One active, brown colored nozzle; one plugged, black colored nozzle. Can be mounted on wood or metal stakes or between two of the existing wires on the growing line. No moving parts. Acid resistant (AA) raw materials. FEATURES AND BENEFITS Unique regulation mechanism makes it the perfect choice for hillside applications or longer rows. The StripNetTM Pro Frost mitigation system operates using as little as 20 m³/hectare (depending on vine row spacing) - less than half the water required by full-coverage sprinkler systems. Alignment problems are solved with the unique, grower-friendly mounting bracket between wires system; simply install it and then forget about it. Proper alignment is inherent. Micro-emitter made of plastic materials is resistant to all agrochemicals and weather conditions. Energy and water saving. Long-term reliable service, simple, modular parts. 30 STRIPNETTM PRO SPRINKLERS 2019 V1.0 STRIPNETTM PRO TECHNICAL DATA MODEL FLOW RATE* CODE COLOR (I/H) 30 31 *Within working pressure range Brown NOZZLE WATER PASSAGES AREA (MM²) 0.83 WORKING PRESSURE RANGE (BAR) 2.0-4.0 WETTED AREA (M X M) 0.5 x 5.5 ACTIVE NOZZLE CODE COLOR Brown PACKAGING DATA STRIPNETTM PRO Head only Complete stand (120 cm) w/o stake Complete stand (200 cm) w/o stake QUANTITY P/BOX UNITS 650 100 50 BOX SIZE (CM X CM X CM) 18 x 34 x 79 17 x 26 x 139 17 x 26 x 139 BOX WEIGHT (KG) 12.2 10.1 7.2 BOXES P/PALLET 36 15 15 TOTAL UNITS P/PALLET 23400 1500 750 PALLET WEIGHT (KG) 439 152 108 STRIPNETTM PRO HEAD ONLY MODEL BIC 030 STRIPNETTM PRO COMPONENTS STRIPNETTM PRO, ACTIVE NOZZLE (BROWN) 64420-002680 STRIPNETTM PRO, PLUGGED NOZZLE (BLACK) 64420-002641 STRIPNETTM PRO "Y" NOZZLES BODY 64420-002700 STRIPNETTM PRO TUBE 64400-001000 STRIPNETTM PRO ASSEMBLY STANDS Catalog number : 64400 - (any of below 6 digits) MODEL STRIPNET PRO BIC 030 120CM W/OSTK STRIPNET PRO BIC 030 200CM W/OSTK 030 001150 001480 All assembly stands include 4*6.5 mm black SPE micro-tube. Other stand combinations can be ordered. 64420-002600 SPRINKLERS 2019 V1.0 STRIPNETTM PRO 31 ASSEMBLY OPTIONS STRIPNETTM PRO CAN BE ASSEMBLED IN ONE OF THE FOLLOWING THREE WAYS: On a wooden pole, with a NetafimTM clamp, Catalog number, 1 unit: 64420-003100 600 units p/box, 28 x 27 x 57 cm, 5.8 kg On a metal stake (2.5 to 5.0 mm thick ), with a NetafimTM special design clamp, Catalog number, 1 unit: 64420-003010 1200 units p/box, 35 x 35 x57 cm, 14.5 kg When the distances between stakes are more than five meters, or when exact alignment is preferred, it is recommended to use the NetafimTM "bracket between wires", unique installation system between two of the vineyard metal wires. This product includes two injected plastic parts, a metal or fiberglass rod (according to the user's choice), and two metal wires for tightening. 2 plastic parts Catalog number: 64420-003600 200 units p/box (only the 2 plastic parts), 18 x 34 x 79 cm, 6.3 kg Double loop wires ties (2 units) Catalog number: 64420-003700 Metal rod, 6 mm diameter 60 cm length Catalog number: 65080-001000 100 cm length Catalog number: 65080-001100 *Other metal rod lengths available upon request 32 STRIPNETTM PRO SPRINKLERS 2019 V1.0 Missing catalog numbers available upon request. Background color defines the code color of the respective swivel. All assembly stands include 4*6.5 mm black SPE micro-tube. Other stand combinations can be ordered based on the attached flowchart which can help determine the desired product requirement. SPRINKLERS 2019 V1.0 STRIPNETTM PRO 33 PULSARTM WITH STRIPNETTM HEAD PRESSURE COMPENSATED EMITTER APPLICATIONS Strip frost-mitigation in vineyards. Cooling of trellised crops. SPECIFICATIONS Pressure compensated static micro-emitter. Consists of a flow regulator (Pressure Compensated dripper), a micro tube connecting between the regulator and the tube chamber inlet, a tube with an air bag inside, AD valve and micro-emitter head. Pressure regulating range: 2.5-4.0 bar. Minimum working pressure at the pressure compensated dripper inlet: 2.5 bar. Micro-emitter height above distributor pipe should be added to the required minimum recommended working pressure, when calculating the minimal pressure required for product's proper operation. Recommended filtration: 130 micron / 120 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles contained in the water. Wherever sand in the water exceeds 2 ppm exists, Hydrocyclone is to be installed before the main filter. When sand / silt / clay exceed 100 ppm, pre-treatment will be applied according to NetafimTM expert team's instructions. Flow rates: 12, 15, 20 l/h. Rectangular water covering pattern. Maximum recommended distance between heads: 6.0 meters. In order to ensure the length of the water covering pattern, make sure that the poles of the vineyards on which the Pulsars are to be installed, are absolutely vertical. One active, brown colored nozzle; one plugged, black colored nozzle. Inlet connectors: barb. Can be mounted on wood or metal stakes. No moving parts. Chemical resistant to standard nutrients used in agricultural. FEATURES AND BENEFITS The PulsarTM-StripNetTM frost-mitigation system operates using as little as 10 m³/h hectare (depending on vine row spacing) - less than 70% the water required by full-coverage sprinkler systems. Several pulses per minute, according to the selected flow rate, ensure continuous irrigation over a large area for many hours. Pressure compensated: Precise and equal amounts of water are delivered over a broad pressure range. 100 % uniformity of water distribution along the laterals. Unique regulation mechanism makes it the perfect choice for hillside applications or longer rows. Soil saturation / flooding are avoided even after many hours of irrigation. The water supply system including pump, filtration system, pipes and fittings is relatively small and far less expensive to purchase, install and maintain. Micro-emitter made of plastic materials resistant to standard nutrients used in agricultural and weather conditions. Energy and water saving. Simple, modular parts. Distributes relatively small water amounts over a large wetted area. 34 PULSARTM WITH STRIPNETTM HEAD SPRINKLERS 2019 V1.0 PACKAGING DATA PULSARTM Head only (UR tube+AD valve+StripNet) Complete UR stand (120 cm.) w/o stake Complete UR stand (200 cm.) w/o stake QUANTITY P/BOX UNITS 150 80 80 BOX SIZE (CM X CM X CM) 36 X 31 X 53 28 x 27 x 113 28 x 27 x 113 BOX WEIGHT (KG) 7.2 8.8 9.2 BOXES P/PALLET 18 16 16 TOTAL UNITS P/PALLET 2700 1280 1280 PALLET WEIGHT (KG) 142 141 147 PULSARTM WITH STRIPNETTM HEAD Flowchart to determine the desired product definition How to use: To determine the desired product definition select one of every set of options displayed on the chart. PRODUCT PulsarTM PLSR STAND Upright URB PLSR URB FLOW Without flow 000 regulator 12 l/h 012 15 l/h 015 20 l/h 020 EMITTER StripNetTM STR31 STR31 AD VALVE AD blue pin ADBLUP STAND ASSEMBLY Complete head (without micro tube HEAD and flow regulator) Head + 120 cm 120CM micro-tube (without W/O adapter) ADP Head + 200 cm 200CM micro-tube (without W/O adapter) ADP *When selecting an undefined tube length, add the desired length in writing. ADBLUP DESCRIPTION AND CATALOG NUMBER SAMPLE CATALOG NUMBER: 63700-005000 SAP DESCRIPTION: PLSR URB 012 STR31 ADBLUP 120CM W/O ADP PRODUCT COMPONENTS: PulsarTM , Flow regulator 12 l/h, 120 cm micro-tube, tube with barb inlet connector, AD valve with blue pin, StripNetTM head with one active nozzle OTHERS ACTIVE CATALOG NUMBERS CATALOG NUMBER: 63700-005100 SAP DESCRIPTION: PLSR URB 012 STR31 ADBLUP 200CM CATALOG NUMBER: 63700-005150 SAP DESCRIPTION: PLSR URB 015 STR31 ADBLUP 200CM CATALOG NUMBER: 63700-005160 SAP DESCRIPTION: PLSR URB 020 STR31 ADBLUP 200CM *Other catalog numbers, according to desired product definition, available upon request. ASSEMBLY OPTIONS PulsarTM UR can be assembled in one of the following ways: CLAMP FOR WOOD POLES CLAMP FOR METAL STAKES ADAPTER TO METAL/ FIBERGLASS RODS 64420-003100 64420-003010 6 mm rod (Blue) 63520-005950 8 mm rod (Black) 63520-005970 For correct installation of the PulsarTM UR it is recommended to use special UV protected bands for this purpose: Black band 380*4.8 UV (100/bag) . Catalog number: 63720-001800 (100 units /bag) SPRINKLERS 2019 V1.0 PULSARTM WITH STRIPNETTM HEAD 35 PULSARTM WITH GYRONETTM HEAD PRESSURE COMPENSATED EMITTER APPLICATIONS Frost-mitigation in fruit trees. Cooling of fruit trees and other crops. SPECIFICATIONS Pressure compensated micro-sprinkler. Consists of a flow regulator (Pressure Compensated dripper), a micro tube connecting between the regulator and the tube chamber inlet, a tube with an air bag inside, AD valve and micro-sprinkler head. Pressure regulating range: according to model. Minimum working pressure at the pressure compensated dripper inlet: 1.7 or 2.5 bar. Micro-sprinkler height above distributor pipe should be added to the required minimum recommended working pressure, when calculating the minimal pressure required for product's proper operation. Recommended filtration: 130 micron / 120 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles contained in the water. Wherever sand in the water exceeds 2 ppm exists, Hydrocyclone is to be installed before the main filter. When sand / silt / clay exceed 100 ppm, pre-treatment will be applied according to NetafimTM expert team's instructions. Flow rates: 8, 12, 15, 20, 25 l/h. 3 different swivels : SR, SRD, SSR (distribution data attached). Recommended installation: one emitter above each tree or according to the crop needs. In order to ensure the water covering pattern, make sure that the poles / rods / stakes on which the Pulsar's are to be installed, are absolutely vertical. Inlet connectors: barb. Can be mounted on wood or metal stakes. Chemical resistant to standard nutrients used in agricultural. FEATURES AND BENEFITS The PulsarTM-GyroNetTM frost-mitigation / cooling system operates using as little as 15 m³/h hectare (depending on trees spacing) - less than 50% the water required by full-coverage sprinkler systems. Several pulses per minute, according to the selected flow rate, ensure continuous irrigation over a large area for many hours. Pressure compensated: Precise and equal amounts of water are delivered over a broad pressure range. 100 % uniformity of water distribution along the laterals. Unique regulation mechanism makes it the perfect choice for hillside applications or longer rows. Soil saturation / flooding are avoided even after many hours of irrigation. The water supply system including pump, filtration system, pipes and fittings is relatively small and far less expensive to purchase, install and maintain. Micro-sprinkler made of plastic materials resistant to standard nutrients used in agricultural and weather conditions. Energy and water saving. Simple, modular parts. Distributes relatively small water amounts over a large wetted area. 36 PULSARTM WITH GYRONETTM HEAD SPRINKLERS 2019 V1.0 PULSARTM WITH GYRONETTM HEAD IN UPRIGHT (UR) INSTALLATIONS MODEL FLOW RATE (L/H) WITH BLUE PIN AD VALVE, AT 2.5 BAR PRESSURE AT THE FLOW REGULATOR INLET WETTED DIAMETER* (M) WETTED AREA (M²) PRECIPITATION RATE AVERAGE (MM/H) GyroNetTM SR 8 4.0 12.6 0.6 GyroNetTM SR 12 5.0 19.6 0.6 GyroNetTM SR 15 5.0 19.6 0.8 GyroNetTM SR 20 5.5 23.8 0.8 GyroNetTM SR 25 6.0 28.3 0.9 GyroNetTM SRD 8 2.5 4.9 1.6 GyroNetTM SRD 12 2.5 4.9 2.4 GyroNetTM SRD 15 2.5 4.9 3.1 GyroNetTM SRD 20 3.0 7.1 2.8 GyroNetTM SRD 25 3.0 7.1 3.5 GyroNetTM SSR 8 1.5 1.8 4.5 GyroNetTM SSR 12 2.0 3.1 3.8 GyroNetTM SSR 15 2.5 4.9 3.1 GyroNetTM SSR 20 2.5 4.9 4.1 GyroNetTM SSR 25 3.0 7.1 3.5 * wetted diameter at 0.5 meter above crop WITH BLACK PIN AD VALVE, AT 1.7 BAR PRESSURE AT THE FLOW REGULATOR INLET WETTED DIAMETER* (M) WETTED AREA (M²) PRECIPITATION RATE AVERAGE (MM/H) 3.5 9.6 0.8 4.0 12.6 1.0 4.5 15.9 0.9 4.5 15.9 1.3 4.5 15.9 1.6 2.0 3.1 2.5 2.0 3.1 3.8 2.0 3.1 4.8 2.5 4.9 4.1 2.5 4.9 5.1 2.0 3.1 2.5 2.5 4.9 2.4 2.5 4.9 3.1 3.0 7.1 2.8 3.0 7.1 3.5 PULSARTM WITH GYRONETTM HEAD IN UPSIDE DOWN (UD) INSTALLATIONS MODEL FLOW RATE (L/H) WITH BLUE PIN AD VALVE, AT 2.5 BAR PRESSURE AT THE FLOW REGULATOR INLET WETTED DIAMETER* (M) WETTED AREA (M²) PRECIPITATION RATE AVERAGE (MM/H) GyroNetTM SR 12 3.5 9.6 1.2 GyroNetTM SR 15 3.5 9.6 1.6 GyroNetTM SR 20 3.5 9.6 2.1 GyroNetTM SSR 12 2.0 3.1 3.8 GyroNetTM SSR 15 2.0 3.1 4.8 GyroNetTM SSR 20 2.0 3.1 6.4 * wetted diameter at 2.5 bar pressure at the flow regulator inlet and at 0.5 meter above crop PACKAGING DATA PULSARTM Head only (UR tube+AD valve+GyroNet) Head only (UD tube+AD valve+GyroNet) Complete UR stand (120 cm.) w/o stake Complete UR stand (200 cm.) w/o stake Complete UD stand (30 cm.) w/o stake QUANTITY P/BOX UNITS 150 80 50 50 100 BOX SIZE (CM X CM X CM) 36 X 31 X 53 28 X 28 X 57 28 x 27 x 113 28 x 27 x 113 28 x 27 x 113 BOX WEIGHT (KG) 7.2 9.1 8.8 9.2 15.2 BOXES P/PALLET 18 32 16 16 16 TOTAL UNITS P/PALLET 2700 2560 800 800 1600 PALLET WEIGHT (KG) 142 291 141 147 243 SPRINKLERS 2019 V1.0 PULSARTM WITH GYRONETTM HEAD 37 PULSARTM WITH GYRONETTM HEAD Flowchart to determine the desired product definition How to use: To determine the desired product definition select one of every set of options displayed on the chart. PRODUCT PulsarTM PLSR STAND Upright Upside down URB UDB PLSR FLOW Without flow 000 regulator 8 l/h 008 12 l/h 012 15 l/h 015 20 l/h 020 EMITTER GyroNetTM SR GYR9SR GyroNetTM SRD GYR9SRD GyroNetTM SSR GYR9SSR AD VALVE AD blue pin ADBLUP AD black pin ADBLCK STAND ASSEMBLY Complete head (without micro tube HEAD and flow regulator) Head + 30 cm micro-tube 30CM W/O ADP Head + 120 cm micro-tube 120CM W/O ADP *When selecting an undefined tube length, add the desired length in writing. DESCRIPTION AND CATALOG NUMBER SAMPLE CATALOG NUMBER: 63700-008180 SAP DESCRIPTION: PLSR URB 020 GYR9SR ADBLUP 120CM PRODUCT COMPONENTS: PulsarTM , Flow regulator 20 l/h, 120 cm micro-tube, tube with barb inlet connector, AD valve with blue pin, GyroNetTM head with SR (short range) swivel OTHERS ACTIVE CATALOG NUMBERS CATALOG NUMBER: 63700-007660 SAP DESCRIPTION: PLSR URB 008 GYR9SR ADBLUP 60CM CATALOG NUMBER: 63700-008190 SAP DESCRIPTION: PLSR URB 020 GYR9SSR ADBLUP 120CM CATALOG NUMBER: 63700-008210 SAP DESCRIPTION: PLSR URB 020 GYR9SSR ADBLUP 200CM CATALOG NUMBER: 63700-008500 SAP DESCRIPTION: PLSR URB 025 GYR9SR ADBLUP 120CM CATALOG NUMBER: 63700-008550 SAP DESCRIPTION: PLSR URB 025 GYR9SSR ADBLUP 120CM *Other catalog numbers, according to desired product definition, available upon request. ASSEMBLY OPTIONS PulsarTM UR can be assembled in one of the following ways: CLAMP FOR WOOD POLES CLAMP FOR METAL STAKES ADAPTER TO METAL/ FIBERGLASS RODS 64420-003100 64420-003010 6 mm rod (Blue) 63520-005950 8 mm rod (Black) 63520-005970 For correct installation of the PulsarTM UR it is recommended to use special UV protected bands for this purpose: Black band 380*4.8 UV (100/bag) . Catalog number: 63720-001800 (100 units /bag) 38 PULSARTM WITH GYRONETTM HEAD SPRINKLERS 2019 V1.0 SPRINKLERS 2019 V1.0 PULSARTM WITH GYRONETTM HEAD 39 PULSARTM WITH MISTNETTM HEAD PRESSURE COMPENSATED EMITTER APPLICATIONS Cooling and humidification of trees areas. SPECIFICATIONS Pressure compensated static micro-emitter. Consists of a flow regulator (Pressure Compensated dripper), a micro tube connecting between the regulator and the tube chamber inlet, a tube with an air bag inside, AD valve and micro-emitter head. Pressure regulating range: 2.5-4.0 bar. Minimum working pressure at the pressure compensated dripper inlet: 2.5 bar. Micro-sprinkler height above distributor pipe should be added to the required minimum recommended working pressure, when calculating the minimal pressure required for product's proper operation. Recommended filtration: 130 micron / 120 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles contained in the water. Wherever sand in the water exceeds 2 ppm exists, Hydrocyclone is to be installed before the main filter. When sand / silt / clay exceed 100 ppm, pre-treatment will be applied according to NetafimTM expert team's instructions. Flow rates: 8 l/h. Recommended installation: one emitter above or in the middle of each tree. Static micro-emitter, no moving parts. Inlet connectors: barb. Can be mounted on wood or metal stakes. Chemical resistant to standard nutrients used in agricultural. FEATURES AND BENEFITS The PulsarTM-MistNetTM cooling system operates using as little as 10 m³/h hectare (depending on trees spacing). Several pulses per minute ensure continuous irrigation over a large area for many hours. Pressure compensated: Precise and equal amounts of water are delivered over a broad pressure range. 100 % uniformity of water distribution along the laterals. Unique regulation mechanism makes it the perfect choice for hillside applications or longer rows. Soil saturation / flooding are avoided even after many hours of irrigation. The water supply system including pump, filtration system, pipes and fittings is relatively small and far less expensive to purchase, install and maintain. Micro-emitter made of plastic materials resistant to standard nutrients used in agricultural and weather conditions. Energy and water saving. Distributes relatively small water amounts over a large wetted area. 40 PULSARTM WITH M ISTNETTM HEAD SPRINKLERS 2019 V1.0 PACKAGING DATA PULSARTM Head only (UR tube+AD valve+MistNet) Complete UR stand (120 cm.) w/o stake Complete UR stand (200 cm.) w/o stake QUANTITY P/BOX UNITS 150 50 50 BOX SIZE (CM X CM X CM) 36 X 31 X 53 28 x 27 x 113 28 x 27 x 113 BOX WEIGHT (KG) 7.2 8.8 9.2 BOXES P/PALLET 18 16 16 TOTAL UNITS P/PALLET 2700 800 800 PALLET WEIGHT (KG) 142 141 147 PULSARTM WITH MISTNETTM HEAD Flowchart to determine the desired product definition How to use: To determine the desired product definition select one of every set of options displayed on the chart. PRODUCT PulsarTM PLSR STAND Upright URB PLSR URB FLOW Without flow 000 regulator 8 l/h 008 EMITTER MistNetTM MST25 MST25 AD VALVE AD blue pin ADBLUP STAND ASSEMBLY Complete head (without micro tube and flow regulator) HEAD Head + 120 cm micro-tube (without adapter) 120CM W/O ADP Head + 200 cm micro-tube (without adapter) 200CM W/O ADP *When selecting an undefined tube length, add the desired length in writing. ADBLUP DESCRIPTION AND CATALOG NUMBER SAMPLE CATALOG NUMBER: 63700-006100 SAP DESCRIPTION: PLSR URB 008 MST25 ADBLUP 200CM PRODUCT COMPONENTS: PulsarTM , Flow regulator 8 l/h, 120 cm micro-tube, tube with barb inlet connector, AD valve with blue pin, MistNetTM head. ASSEMBLY OPTIONS PulsarTM UR can be assembled in one of the following ways: CLAMP FOR WOOD POLES CLAMP FOR METAL STAKES ADAPTER TO METAL/ FIBERGLASS RODS 64420-003100 64420-003010 6 mm rod (Blue) 63520-005950 8 mm rod (Black) 63520-005970 For correct installation of the PulsarTM UR it is recommended to use special UV protected bands for this purpose: Black band 380*4.8 UV (100/bag) . Catalog number: 63720-001800 (100 units /bag) SPRINKLERS 2019 V1.0 PULSARTM WITH M ISTNETTM HEAD 41 PULSARTM WITH VIBRONETTM HEAD PRESSURE COMPENSATED EMITTER DISTRIBUTES RELATIVELY SMALL WATER AMOUNTS OVER A LARGE WETTED AREA APPLICATIONS On germination tables, very low precipitation rate irrigation in upside down stands. SPECIFICATIONS Pressure compensated micro-emitter. Consists of a flow regulator (Pressure Compensated dripper), a micro tube connecting between the regulator and the tube chamber inlet, a tube with an air bag inside, AD valve and VibroNetTM head. Minimum working pressure at the flow regulator inlet: 3.5 bar. Recommended filtration: 130 micron / 120 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles contained in the water. Wherever sand in the water exceeds 2 ppm exists, Hydrocyclone is to be installed before the main filter. When sand / silt / clay exceed 100 ppm, pre-treatment will be applied according to NetafimTM expert team's instructions. Flow rates: 8, 12, 15, 20 l/h. Recommended installation: 1.5 meter above the crop at 1.6*1.6 to 2*2 meters rectangular shape. Inlet connectors: barb. Chemical resistant to standard nutrients used in agricultural. FEATURES AND BENEFITS Several pulses per minute ensure continuous irrigation over a large area. Pressure compensated: Precise and equal amounts of water are delivered over a broad pressure range. 100 % uniformity of water distribution along the laterals. Unique regulation mechanism makes it the perfect choice for longer rows. The water supply system including pump, filtration system, pipes and fittings is relatively small and far less expensive to purchase, install and maintain. Micro-emitter made of plastic materials resistant to standard nutrients used in agricultural and weather conditions. Energy and water saving. Simple, modular parts. 42 PULSARTM WITH VIBRONETTM HEAD SPRINKLERS 2019 V1.0 PACKAGING DATA PULSARTM Complete UD stand (30 cm.) QUANTITY P/BOX UNITS 100 BOX SIZE (CM X CM X CM) 28 x 27 x 113 BOX WEIGHT (KG) 6.8 BOXES P/PALLET 16 TOTAL UNITS P/PALLET 1600 PALLET WEIGHT (KG) 109 PULSARTM WITH VIBRONETTM HEAD Flowchart to determine the desired product definition How to use: To determine the desired product definition select one of every set of options displayed on the chart. PRODUCT PulsarTM PLSR STAND Upside down UDB FLOW Without flow 000 regulator 8 l/h 008 12 l/h 012 15 l/h 015 20 l/h 020 EMITTER VibroNetTM VBN50 AD VALVE STAND ASSEMBLY AD Purple pin ADPURP Complete head (without micro tube HEAD and flow regulator) Head + 30 cm 30CM micro-tube (without W/O adapter) ADP Head + 60 cm 60CM micro-tube (without W/O adapter) ADP *When selecting an undefined tube length, add the desired length in writing. PLSR UDB VBN50 ADPURP DESCRIPTION AND CATALOG NUMBER SAMPLE Sap description: PLSR UDB 012 VBN50 ADPURP 30CM GRAY Catalog number: 63700-011500 Product components: PulsarTM , Flow regulator 12 l/h, 30 cm gray micro-tube, tube with barb inlet connector, AD valve with purple pin, VibroNetTM head. SPRINKLERS 2019 V1.0 PULSARTM WITH VIBRONETTM HEAD 43 PULSARTM WITH COOLNETTM PRO HEAD PRESSURE COMPENSATED EMITTER DISTRIBUTES RELATIVELY SMALL WATER AMOUNTS OVER A LARGE WETTED AREA APPLICATIONS Cooling or Humidification. SPECIFICATIONS Pressure compensated micro-emitter. Consists of a flow regulator (Pressure Compensated dripper), a micro tube connecting between the regulator and the tube chamber inlet, a tube with an air bag inside, AD valve and CoolNetTM Pro head. Minimum working pressure at the flow regulator inlet: 3.5 bar. Recommended filtration: 130 micron / 120 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles contained in the water. Wherever sand in the water exceeds 2 ppm exists, Hydrocyclone is to be installed before the main filter. When sand / silt / clay exceed 100 ppm, pre-treatment will be applied according to NetafimTM expert team's instructions. Flow rates: 8, 12, 15 l/h. Recommended installation: 3*3 meters rectangular shape as high it is possible, all the emitters at the same level. Inlet connectors: barb. Chemical resistant to standard nutrients used in agricultural. FEATURES AND BENEFITS Several pulses per minute ensure continuous water distribution over a large area. Pressure compensated: Precise and equal amounts of water are delivered over a broad pressure range. 100 % uniformity of water distribution along the laterals. Unique regulation mechanism makes it the perfect choice for longer rows. The water supply system including pump, filtration system, pipes and fittings is relatively small and far less expensive to purchase, install and maintain. Micro-emitter made of plastic materials resistant to standard nutrients used in agricultural and weather conditions. Energy and water saving. Simple, modular parts. 44 PULSARTM WITH COO LNETTM PRO HEAD SPRINKLERS 2019 V1.0 PACKAGING DATA PULSARTM Complete UD stand (30 cm.) QUANTITY P/BOX UNITS 100 BOX SIZE (CM X CM X CM) 28 x 27 x 113 BOX WEIGHT (KG) 7.6 BOXES P/PALLET 16 TOTAL UNITS P/PALLET 1600 PALLET WEIGHT (KG) 122 PULSARTM WITH COOLNETTM PRO HEAD Flowchart to determine the desired product definition How to use: To determine the desired product definition select one of every set of options displayed on the chart. PRODUCT PulsarTM PLSR STAND Upside down UDB PLSR UDB FLOW Without flow 000 regulator 8 l/h 008 12 l/h 012 15 l/h 015 EMITTER CoolNetTM COOL4X14 COOL4X14 AD VALVE STAND ASSEMBLY AD Purple pin ADPURP Complete head (without micro tube HEAD and flow regulator) Head + 15 cm 15CM micro-tube (without W/O adapter) ADP Head + 30 cm 30CM micro-tube (without W/O adapter) ADP *When selecting an undefined tube length, add the desired length in writing. ADPURP DESCRIPTION AND CATALOG NUMBER SAMPLE Sap description: PLSR UDB 008 COOL4X14 ADPURP 15CM Catalog number: 63700-004300 Product components: PulsarTM , Flow regulator 8.0 l/h, 15 cm gray micro-tube, tube with barb inlet connector, AD valve with purple pin, CoolNetTM Pro head. SPRINKLERS 2019 V1.0 PULSARTM WITH COOLNETTM PRO HEAD 45 GYRONETTM LR & LRD LONG RANGE & LONG RANGE WITH DEFLECTOR APPLICATIONS Irrigation of tree plantations with large root volumes. SPECIFICATIONS LR means a revolving rotor irrigating a large area. LRD stream deflector concentrates all the water in the area surrounding the young tree during the initial growing period. When the tree grows, the stream deflector can be broken off, thus enabling extended irrigation diameter. Micro-sprinkler, 10 different flow rates: 27, 40, 58, 70, 90, 120, 150, 200, 250, 300 l/h. Nominal flow rates at 1.7 bar pressure. Maximum recommended working pressure: 2.5 bar. Recommended filtration: 200 micron / 80 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter. When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to NetafimTM expert team's instructions. 3 types of inlet connectors: Self tapping Press fit 3/8" male threaded 2 types of upper bearing: Standard - for normal water EverspinTM - for harsh conditions The rotor is colored Purple for flows 27 and 40 l/h, Black for flows of 50 to 120 l/h and Gray for flows of 150 to 300 l/h. FEATURES AND BENEFITS Anti-ant mechanism prevents insect penetration into the area of the micro-sprinklers nozzle. Micro-sprinkler made of plastic materials resistant to all agrochemicals & weather conditions. Specially designed for fruit trees, orchards, deciduous and other tree crops. Can be used in Frost mitigation and/or Cooling irrigation systems. Long-term reliable service, simple, modular parts. 46 GYRONETTM LR & LRD SPRINKLERS 2019 V1.0 GYRONETTM TECHNICAL DATA MODEL NOZZLE CODE COLOR NOZZLE SIZE (MM) 027 Brown 0.75 040 Blue 0.90 058 Gray 1.10 070 Black 1.20 090 Orange 1.40 120 Red 1.57 150 Sky Blue 1.77 200 Yellow 2.04 250 Purple 2.28 300 Green 2.48 CONSTANT K 6.7 9.4 13.5 17.4 22.4 28.8 37.5 49.1 61.9 73.2 EXPONENT X 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 MAXIMUM WORKING PRESSURE (BAR) 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 WETTED DIAMETER (M) LR 20 CM ABOVE GROUND LRD 20 CM ABOVE GROUND 4.0 1.5 5.5 1.5 7.0 1.5 7.0 2.0 7.0 2.0 8.0 2.0 8.5 N/A 9.5 N/A 10.0 N/A 11.0 N/A SWIVEL (ROTOR) CODE COLOR Purple Purple Black Black Black Black Gray Gray Gray Gray PACKAGING DATA GYRONETTM LR & LRD Head only Complete stand (60 cm) w/stake Complete stand (60 cm) w/o stake Complete stand (90 cm) w/stake Complete stand (90 cm) w/o stake QUANTITY P/BOX UNITS 1000 100 250 150 200 BOX SIZE (CM X CM X CM) 28 x 28 x 57 18 x 34 x 79 18 x 34 x 79 28 x 27 x 113 28 x 27 x 113 BOX WEIGHT (KG) 12.5 6.3 7.1 7.6 8.1 BOXES P/PALLET 32 20 20 18 18 TOTAL UNITS P/PALLET 32000 2000 5000 2700 3600 PALLET WEIGHT (KG) 412 137 153 147 155 GYRONETTM LONG RANGE & LONG RANGE WITH DEFLECTOR Flowchart to determine the desired product definition How to use: To determine the desired product definition select one of every set of options displayed on the chart. EMITTER GyroNetTM GYR DISPERSION DEFLECTOR Long Range swivel LR HEAD INLET CONNECTOR Press fit male MIC Long Range with LRD deflector Self tapping STIC 3/8" male threaded 3/8IC UPPER BEARING EverspinTM ESUB Standard STUB GYR FLOW 27 l/h 027 40 l/h 040 58 l/h 058 70 l/h 070 90 l/h 090 120 l/h 120 150 l/h 150 200 l/h 200 250 l/h 250 300 l/h 300 STAND ASSEMBLY Head only HEAD ONLY Head + 60 cm 60CM microtube + Stake W/STK Head + 60 cm microtube 60CM W/OSTK Head + 90 cm 90CM microtube + Stake W/STK Head + 90 cm microtube 90CM W/OSTK Head + XXX cm STL microtube + Stake W/STK Head + XXX cm microtube STL W/OSTK *When selecting an undefined tube length, add the desired length in writing. CONNECTOR TO LATERAL Barb BC Press fit PFC 3/8" conic 3/8C press fit ACCESSORIES Stream splitter SP AD valve 1.5/0.7 AD15 bar SPRINKLERS 2019 V1.0 GYRONETTM LR & LRD 47 GYRONETTM LR head only with Standard upper bearing Catalog number : 64000 - (any of below 6 digits) MODEL 027 040 058 070 090 120 150 200 250 300 STIC 000800 001000 002260 002300 003555 003600 012505 N/A N/A N/A MIC 020200 020300 021560 021600 022855 022900 070000 071500 073000 074500 3/8IC N/A N/A N/A 078400 079200 GYRONETTM LR head only with EverspinTM upper bearing Catalog number : 64000 - (any of below 6 digits) Model 027 040 058 070 090 120 150 200 250 300 STIC 000805 001010 002262 002305 003557 003610 012507 N/A N/A N/A MIC 022930 022945 070010 071100 071250 071400 3/8IC N/A N/A N/A 078420 078820 GyroNetTM LR STIC, self tapping inlet connector GyroNetTM LR MIC, press fit, male inlet connector GyroNetTM LR 3/8" male threaded inlet connector GYRONETTM LR assembly stands Catalog number : 64000 - (any of below 6 digits) MODEL GYR LR STIC STUB XXX 60CM W/STK BC GYR LR STIC STUB XXX 60CM W/STK PFC GYR LR MIC STUB XXX 60CM W/STK BC GYR LR MIC STUB XXX 60CM W/STK PFC GYR LR STIC STUB XXX 90CM W/STK BC GYR LR STIC STUB XXX 90CM W/STK PFC GYR LR MIC STUB XXX 90CM W/STK BC GYR LR MIC STUB XXX 90CM W/STK PFC 027 040 058 070 090 120 150 200 250 300 000880 001400 002700 003575 004000 N/A N/A N/A 001300 002290 002600 N/A N/A N/A 020700 022000 023300 021900 002296 003100 N/A N/A N/A 001700 N/A N/A N/A 021100 021000 022300 022854 023600 Catalog number : 64000 - (any of below 6 digits) MODEL GYR LR STIC STUB XXX 60CM W/OSTK BC GYR LR STIC STUB XXX 60CM W/OSTK PFC GYR LR MIC STUB XXX 60CM W/OSTK BC GYR LR MIC STUB XXX 60CM W/OSTK PFC GYR LR STIC STUB XXX 90CM W/OSTK BC GYR LR STIC STUB XXX 90CM W/OSTK PFC GYR LR MIC STUB XXX 90CM W/OSTK BC GYR LR MIC STUB XXX 90CM W/OSTK PFC 027 040 058 070 090 120 150 200 250 300 001200 002500 003570 N/A N/A N/A 000850 001100 002280 002400 003578 003700 004853 N/A N/A N/A 002295 003110 003578 004200 022200 022100 023640 N/A N/A N/A N/A N/A N/A Missing catalog numbers available upon request. Background color defines the code color of the respective swivel. All assembly stands include 4*6.5 mm black SPE micro-tube. Other stand combinations can be ordered based on the attached flowchart which can help determine the desired product requirement. 48 GYRONETTM LR & LRD SPRINKLERS 2019 V1.0 GYRONETTM LRD head only with Standard upper bearing Catalog number : 64000 - (any of below 6 digits) MODEL 027 040 058 070 090 120 150 200 250 300 STIC 004860 004900 006110 006150 007355 007400 008605 N/A N/A N/A MIC 024175 024200 025410 025450 026655 026700 3/8IC N/A N/A N/A 079400 079600 079800 080000 080200 079850 079860 GYRONETTM LRD head only with EverspinTM upper bearing Catalog number : 64000 - (any of below 6 digits) Model 027 040 058 070 090 120 150 200 250 300 STIC 004865 004910 006112 006155 007357 007410 012506 N/A N/A N/A MIC 024176 024210 025411 025460 026656 026710 3/8IC N/A N/A N/A 079420 079620 079820 080020 080220 N/A N/A GYRONETTM LRD assembly stands Catalog number : 64000 - (any of below 6 digits) MODEL GYR LRD STIC STUB XXX 60CM W/STK BC GYR LRD STIC STUB XXX 60CM W/STK PFC GYR LRD MIC STUB XXX 60CM W/STK BC GYR LRD MIC STUB XXX 60CM W/STK PFC GYR LRD STIC STUB XXX 90CM W/STK BC GYR LRD STIC STUB XXX 90CM W/STK PFC GYR LRD MIC STUB XXX 90CM W/STK BC GYR LRD MIC STUB XXX 90CM W/STK PFC 027 040 058 070 090 120 024180 024600 025415 025850 026657 027100 026160 026685 024900 025430 026150 026690 027400 GyroNetTM LRD STIC, self tapping inlet connector GyroNetTM LRD MIC, press fit, male inlet connector GyroNetTM LRD 3/8" male threaded inlet connector 150 200 250 300 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A Catalog number : 64000 - (any of below 6 digits) MODEL GYR LRD STIC STUB XXX 60CM W/OSTK BC GYR LRD STIC STUB XXX 60CM W/OSTK PFC GYR LRD MIC STUB XXX 60CM W/OSTK BC GYR LRD MIC STUB XXX 60CM W/OSTK PFC GYR LRD STIC STUB XXX 90CM W/OSTK BC GYR LRD STIC STUB XXX 90CM W/OSTK PFC GYR LRD MIC STUB XXX 90CM W/OSTK BC GYR LRD MIC STUB XXX 90CM W/OSTK PFC 027 040 058 070 090 120 150 200 250 300 006290 N/A N/A N/A N/A N/A N/A 024700 025950 026660 027200 N/A N/A N/A N/A N/A N/A Missing catalog numbers available upon request. Background color defines the code color of the respective swivel. All assembly stands include 4*6.5 mm black SPE micro-tube. Other stand combinations can be ordered based on the attached flowchart which can help determine the desired product requirement. SPRINKLERS 2019 V1.0 GYRONETTM LR & LRD 49 GYRONETTM MR & MRD MIDDLE RANGE & MIDDLE RANGE WITH DEFLECTOR APPLICATIONS Irrigation of tree plantations with mid-size root volumes. BENEFITS AND FEATURES Ensures higher crop uniformity Unique design of the sprinkler's rotor water channel. Reduces maintenance and repair costs The GyroNetTM has an anti-ant mechanism preventing insect penetration into the area of the micro-sprinkler nozzle. Higher reliability & longevity Long-term reliable service, simple, modular parts, clog resistant design. Specialty raw material makes it resistant to all agrochemicals & weather conditions. Suitable for diverse applications Specifically designed for fruit trees, orchards, deciduous and other tree crops requiring efficient water distribution. Can be used for Frost Mitigation and/or cooling irrigation systems. SPECIFICATIONS MR means a revolving rotor irrigating a middle area. MRD stream deflector concentrates all the water in the area surrounding the young tree during the initial growing period. When the tree grows, the stream deflector can be broken off, thus enabling extended irrigation diameter. Micro-sprinkler, 4 different flow rates: 27, 40, 58, 70 l/h. Flow rates within pressure range. Nominal flow rates at 1.7 bar pressure. Maximum recommended working pressure: 2.5 bar Recommended filtration: 200 micron / 80 mesh. Filtration method to be selected based on the type and concentration of the dirt particles contained in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone shall be installed before the main filter. Wherever sand/ silt/ clay solids exceed 100 ppm, pre-treatment shall be applied according to NetafimTM expert team's instructions. There are 3 types of inlet connectors: Self-tapping Press fit 3/8" male threaded 2 types of upper bearing: Standard - for normal water EverspinTM - for harsh conditions The rotor is colored Brown for all different flows. GyroNetTM micro-sprinklers meet ISO 8026 standards (SI 1406) with production certified by the Israel Standards Institute (SII). 50 GYRONETTMMR & MRD SPRINKLERS 2019 V1.0 GYRONETTM MR & MRD TECHNICAL DATA MODEL NOZZLE CODE COLOR NOZZLE SIZE CONSTANT (MM) K 027 Brown 0.75 6.7 040 Blue 0.90 9.4 058 Gray 1.10 13.5 070 Black 1.20 17.4 EXPONENT X 0.5 0.5 0.5 0.5 MAXIMUM WORKING PRESSURE (BAR) 2.5 2.5 2.5 2.5 WETTED DIAMETER (M) MRD 25 CM ABOVE GROUND MRD 25 CM ABOVE GROUND 4.5 2.0 5.5 2.5 6.5 2.5 6.5 2.5 SWIVEL (ROTOR) CODE COLOR Brown Brown Brown Brown PACKAGING DATA GYRONETTM MR & MRD Head only Complete stand (60 cm) w/stake Complete stand (60 cm) w/o stake Complete stand (90 cm) w/stake Complete stand (90 cm) w/o stake QUANTITY P/BOX UNITS 1000 100 250 150 200 BOX SIZE (CM X CM X CM) 28 x 28 x 57 18 x 34 x 79 18 x 34 x 79 28 x 27 x 113 28 x 27 x 113 BOX WEIGHT (KG) 12.5 6.3 7.1 7.6 8.1 BOXES P/PALLET 32 20 20 18 18 TOTAL UNITS P/PALLET 32000 2000 5000 2700 3600 PALLET WEIGHT (KG) 412 137 153 147 155 GYRONETTM MIDDLE RANGE & MIDDLE RANGE WITH DEFLECTOR Flowchart to determine the desired product definition How to use: To determine the desired product definition select one of every set of options displayed on the chart. EMITTER GyroNetTM GYR DISPERSION DEFLECTOR Mddle Range MR swivel Middle Range with MRD deflector HEAD INLET CONNECTOR Press fit male MIC Self tapping STIC 3/8" male threaded 3/8IC UPPER BEARING EverspinTM ESUB Standard STUB GYR FLOW 27 l/h 027 40 l/h 040 58 l/h 058 70 l/h 070 STAND ASSEMBLY Head only HEAD ONLY Head + 60 cm 60CM microtube + Stake W/STK Head + 60 cm microtube 60CM W/OSTK CONNECTOR TO LATERAL Barb BC Press fit PFC 3/8" conic 3/8C press fit Head + 90 cm 90CM microtube + Stake W/STK Head + 90 cm microtube 90CM W/OSTK Head + XXX cm STL microtube + Stake W/STK Head + XXX cm microtube STL W/OSTK *When selecting an undefined tube length, add the desired length in writing. ACCESSORIES Stream splitter SP AD valve 1.5/0.7 AD15 bar SPRINKLERS 2019 V1.0 GYRONETTMMR & MRD 51 GYRONETTM SR & SRD SHORT RANGE & SHORT RANGE WITH DEFLECTOR APPLICATIONS Irrigation of tree plantations, and orchards where ground is shaded by the foliage, leaving dry strips between the rows. SPECIFICATIONS SR means a revolving rotor irrigating a medium sized area. SRD stream deflector concentrates all the water in the area surrounding the young tree during the initial growing period. When the tree grows, the stream deflector can be broken off, thus enabling extended irrigation diameter. Micro-sprinkler, 10 different flow rates: 27, 40, 58, 70, 90, 120, 150, 200, 250, 300 l/h. Nominal flow rates at 1.7 bar pressure. Maximum recommended working pressure: 2.5 bar. Recommended filtration: 200 micron / 80 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter. When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to NetafimTM expert team's instructions. 3 types of inlet connectors: Self tapping Press fit 3/8" male threaded 4 types of upper bearing: Standard - for normal water EverspinTM - for harsh condition With spring - for upside down application Spring EverspinTM for upside down application under harsh condition The rotor is colored Blue. FEATURES AND BENEFITS Anti-ant mechanism prevents insect penetration into the area of the micro-sprinklers nozzle. Micro-sprinkler made of plastic materials resistant to all agrochemicals & weather conditions. Specially designed for fruit trees, orchards, deciduous and other tree crops. Can be used in Frost mitigation and/or Cooling irrigation systems. Long-term reliable service, simple, modular parts. 52 GYRONETTM SR & SRD SPRINKLERS 2019 V1.0 GYRONETTM TECHNICAL DATA MODEL NOZZLE CODE COLOR NOZZLE SIZE (MM) 027 Brown 0.75 040 Blue 0.90 058 Gray 1.10 070 Black 1.20 090 Orange 1.40 120 Red 1.57 150 Sky Blue 1.77 200 Yellow 2.04 250 Purple 2.28 300 Green 2.48 CONSTANT K 6.7 9.4 13.5 17.4 22.4 28.8 37.5 49.1 61.9 73.2 EXPONENT X 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 MAXIMUM WORKING PRESSURE (BAR) 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 WETTED DIAMETER (M) SR 20 CM ABOVE GROUND 3.5 SRD 20 CM ABOVE GROUND 1.3 4.5 1.3 5.0 1.3 5.5 1.3 6.0 1.3 6.5 1.3 7.0 2.5 8.5 2.5 8.5 3.5 8.5 3.5 SWIVEL (ROTOR) CODE COLOR Blue Blue Blue Blue Blue Blue Blue Blue Blue Blue PACKAGING DATA GYRONETTM SR & SRD Head only Complete stand (60 cm) w/stake Complete stand (60 cm) w/o stake Complete stand (90 cm) w/stake Complete stand (90 cm) w/o stake QUANTITY P/BOX UNITS 1000 100 250 150 200 BOX SIZE (CM X CM X CM) 28 x 28 x 57 18 x 34 x 79 18 x 34 x 79 28 x 27 x 113 28 x 27 x 113 BOX WEIGHT (KG) 12.5 6.3 7.1 7.6 8.1 BOXES P/PALLET 32 20 20 18 18 TOTAL UNITS P/PALLET 32000 2000 5000 2700 3600 PALLET WEIGHT (KG) 412 137 153 147 155 GYRONETTM SHORT RANGE & SHORT RANGE WITH DEFLECTOR Flowchart to determine the desired product definition How to use: To determine the desired product definition select one of every set of options displayed on the chart. EMITTER GyroNetTM GYR DISPERSION DEFLECTOR Short Range swivel SR HEAD INLET CONNECTOR Press fit male MIC Short Range with SRD deflector Self tapping STIC 3/8" male threaded 3/8IC UPPER BEARING EverspinTM ESUB Spring SPUB Standard Spring EverspinTM STUB SPES GYR FLOW 27 l/h 027 40 l/h 040 58 l/h 058 70 l/h 070 90 l/h 090 120 l/h 120 150 l/h 150 200 l/h 200 250 l/h 250 300 l/h 300 STAND ASSEMBLY Head only HEAD ONLY Head + 60 cm 60CM microtube + Stake W/STK Head + 60 cm microtube 60CM W/OSTK Head + 90 cm 90CM microtube + Stake W/STK Head + 90 cm microtube 90CM W/OSTK Head + XXX cm STL microtube + Stake W/STK Head + XXX cm microtube STL W/OSTK *When selecting an undefined tube length, add the desired length in writing. CONNECTOR TO LATERAL Barb BC Press fit PFC 3/8" conic 3/8C press fit ACCESSORIES Stream splitter SP AD valve 1.5/0.7 AD15 bar SPRINKLERS 2019 V1.0 GYRONETTM SR & SRD 53 GYRONETTM SR head only with Standard upper bearing Catalog number : 64000 - (any of below 6 digits) MODEL 027 040 058 070 090 120 150 200 250 300 STIC 008630 008650 009910 009950 011205 011250 N/A N/A N/A MIC 027925 027950 029210 029250 030505 030550 071490 031110 3/8IC N/A N/A N/A 076500 077005 GyroNetTM SR STIC, self tapping inlet connector GyroNetTM SR MIC, press fit, male inlet connector GYRONETTM SR head only with EverspinTM upper bearing Catalog number : 64000 - (any of below 6 digits) Model 027 040 058 070 090 120 150 200 250 300 STIC 008632 008652 009912 009952 011207 011270 N/A N/A N/A MIC 029214 029215 029255 030507 030515 3/8IC N/A N/A N/A 076520 076720 GYRONETTM SR head only with Spring upper bearing Catalog number : 64000 - (any of below 6 digits) MODEL 027 040 058 070 090 120 150 200 250 300 STIC 008660 011260 N/A N/A N/A MIC 027930 027960 029211 029260 030506 030560 038510 3/8IC N/A N/A N/A GYRONETTM SR assembly stands Catalog number : 64000 - (any of below 6 digits) MODEL GYR SR STIC STUB XXX 60CM W/STK BC GYR SR STIC STUB XXX 60CM W/STK PFC GYR SR MIC STUB XXX 60CM W/STK BC GYR SR MIC STUB XXX 60CM W/STK PFC GYR SR STIC STUB XXX 90CM W/STK BC GYR SR STIC STUB XXX 90CM W/STK PFC GYR SR MIC STUB XXX 90CM W/STK BC GYR SR MIC STUB XXX 90CM W/STK PFC 027 040 058 070 090 120 150 200 250 300 009050 010350 N/A N/A N/A 008635 010250 011550 N/A N/A N/A 028350 029650 030950 029550 012050 N/A N/A N/A N/A N/A N/A 028750 029950 Catalog number : 64000 - (any of below 6 digits) MODEL 027 040 058 070 090 120 150 200 250 300 GYR SR STIC STUB XXX 60CM W/OSTK BC 008850 009920 N/A N/A N/A GYR SR STIC STUB XXX 60CM W/OSTK PFC N/A N/A N/A GYR SR MIC STUB XXX 60CM W/OSTK BC 028360 GYR SR MIC STUB XXX 60CM W/OSTK PFC 029350 GYR SR STIC STUB XXX 90CM W/OSTK BC N/A N/A N/A GYR SR STIC STUB XXX 90CM W/OSTK PFC N/A N/A N/A GYR SR MIC STUB XXX 90CM W/OSTK BC GYR SR MIC STUB XXX 90CM W/OSTK PFC Missing catalog numbers available upon request. Background color defines the code color of the respective swivel. All assembly stands include 4*6.5 mm black SPE micro-tube. Other stand combinations can be ordered based on the attached flowchart which can help determine the desired product requirement. 54 GYRONETTM SR & SRD SPRINKLERS 2019 V1.0 GYRONETTM SRD Head only with Standard upper bearing Catalog number : 64000 - (any of below 6 digits) MODEL 027 040 058 070 090 120 150 200 250 300 STIC 012530 012550 013810 013850 015105 015150 016500 N/A N/A N/A MIC 031825 031850 033110 033150 034405 034450 035700 037500 038500 039500 3/8IC N/A N/A N/A 077405 077600 078200 078210 078215 GyroNetTM SRD STIC, self tapping inlet connector GYRONETTM SRD head only with EverspinTM upper bearing Catalog number : 64000 - (any of below 6 digits) Model 027 040 058 070 090 120 150 200 250 300 STIC 012532 012555 013812 015160 N/A N/A N/A MIC 031826 031860 033111 033160 034406 034460 3/8IC N/A N/A N/A 077820 078020 078220 GyroNetTM SRD MIC, press fit, male inlet connector GyroNetTM SRD 3/8" male threaded inlet connector GYRONETTM SRD assembly stands Catalog number : 64000 - (any of below 6 digits) MODEL 027 040 058 070 090 120 150 200 250 300 GYR SRD STIC STUB XXX 60CM W/STK BC 014250 GYR SRD STIC STUB XXX 60CM W/STK PFC 014150 GYR SRD MIC STUB XXX 60CM W/STK BC 031840 032250 033140 033550 034420 034850 039510 GYR SRD MIC STUB XXX 60CM W/STK PFC GYR SRD STIC STUB XXX 90CM W/STK BC 013845 015950 GYR SRD STIC STUB XXX 90CM W/STK PFC GYR SRD MIC STUB XXX 90CM W/STK BC 032650 033950 GYR SRD MIC STUB XXX 90CM W/STK PFC 032550 033850 034415 035150 Catalog number : 64000 - (any of below 6 digits) MODEL 027 040 058 070 090 120 150 200 250 300 GYR SR STIC STUB XXX 60CM W/OSTK BC GYR SR STIC STUB XXX 60CM W/OSTK PFC GYR SR MIC STUB XXX 60CM W/OSTK BC 033560 039520 GYR SR MIC STUB XXX 60CM W/OSTK PFC GYR SR STIC STUB XXX 90CM W/OSTK BC 012540 014450 GYR SR STIC STUB XXX 90CM W/OSTK PFC 014350 GYR SR MIC STUB XXX 90CM W/OSTK BC GYR SR MIC STUB XXX 90CM W/OSTK PFC 032350 034950 Missing catalog numbers available upon request. Background color defines the code color of the respective swivel. All assembly stands include 4*6.5 mm black SPE micro-tube. Other stand combinations can be ordered based on the attached flowchart which can help determine the desired product requirement. SPRINKLERS 2019 V1.0 GYRONETTM SR & SRD 55 GYRONETTM UD UPSIDE DOWN APPLICATIONS For application where sprinklers are mounted inverted to keep the ground clear and prevent damage to the sprinklers by harvesters and machinery. SPECIFICATIONS Special designed upside down rotor. Micro-sprinkler, 3 different flow rates: 40, 58, 70 l/h. Nominal flow rates at 1.7 bar pressure. Maximum recommended working pressure: 2.5 bar. Recommended filtration: 200 micron / 80 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter. When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to NetafimTM expert team's instructions. 2 types of inlet connectors: Self tapping Press fit Upper bearing: A specially designed spring bearing keeps the anti-ant feature even when the sprinkler is mounted in an up side down position. Spring upper bearing with EverspinTM feature to improve wear resistance under harsh condition. The rotor is colored Green. FEATURES AND BENEFITS Anti-ant mechanism prevents insect penetration into the area of the micro-sprinklers nozzle. Micro-sprinkler made of plastic materials resistant to all agrochemicals & weather conditions. Specially designed for fruit trees, orchards, deciduous and other tree crops. Can be used in Frost mitigation and/or Cooling irrigation systems. Long-term reliable service, simple, modular parts. 56 GYRONE TTM UD SPRINKLERS 2019 V1.0 GYRONETTM TECHNICAL DATA MODEL 040 058 070 NOZZLE CODE COLOR Blue Gray Black NOZZLE SIZE (MM) 0.90 1.10 1.20 CONSTANT K 9.4 13.5 17.4 EXPONENT X 0.5 0.5 0.5 MAXIMUM WORKING PRESSURE (BAR) 2.5 2.5 2.5 WETTED DIAMETER (M) UD 50 CM ABOVE GROUND 5.5 7.0 7.0 SWIVEL (ROTOR) CODE COLOR Green Green Green PACKAGING DATA GYRONETTM UD Head only Complete stand, 30 cm tube length with stabilizer Complete stand, 60 cm tube length with stabilizer Complete stand, 90 cm tube length with stabilizer QUANTITY P/BOX UNITS 1000 150 150 150 BOX SIZE (CM X CM X CM) 28 x 28 x 57 28 x 28 x 57 18 x 34 x 79 28 x 27 x 113 BOX WEIGHT (KG) 12.5 10.1 10.5 11.4 BOXES P/PALLET 32 32 20 16 TOTAL UNITS P/PALLET 32000 4800 3000 2400 PALLET WEIGHT (KG) 412 323 210 183 GYRONETTM UD Flowchart to determine the desired product definition How to use: To determine the desired product definition select one of every set of options displayed on the chart. EMITTER GyroNetTM GYR DISPERSION DEFLECTOR Upside down swivel UD HEAD INLET CONNECTOR Press fit male MIC Self tapping STIC UPPER BEARING Spring Spring EverspinTM SPUB SPES FLOW 40 l/h 040 58 l/h 058 70 l/h 070 STAND ASSEMBLY Head only Head + 60 cm microtube Head + 90 cm microtube HEAD ONLY 60CM W/OSTK 90CM W/OSTK CONNECTOR TO LATERAL Barb BC Press fit PFC 3/8" conic 3/8C press fit Head + XXX cm microtube STL W/OSTK ACCESSORIES AD valve 1.5/0.7 AD15 bar *When selecting an undefined tube length, add the desired length in writing. GYR UD SPRINKLERS 2019 V1.0 GYRONE TTM UD 57 GYRONETTM UD head only with Standard upper bearing Catalog number : 64000 - (any of below 6 digits) MODEL 040 058 070 STIC 098990 099990 100990 MIC 090990 091990 092990 GYRONETTM UD head only with Spring upper bearing Catalog number : 64000 - (any of below 6 digits) MODEL 040 058 070 090 STIC 099000 100000 101000 102000 MIC 091000 092000 093000 009400 GYRONETTM UD assembly stands Catalog number : 64000 - (any of below 6 digits) MODEL GYR UD STIC STUB XXX 30CM W/STB PFC GYR UD STIC STUB XXX 60CM W/STB PFC GYR UD MIC STUB XXX 30CM W/STB PFC GYR UD MIC STUB XXX 60CM W/STB PFC 040 099200 091200 GyroNetTM UD STIC, self tapping inlet connector GyroNetTM UD MIC, press fit, male inlet connector 058 070 092200 Missing catalog numbers available upon request. Background color defines the code color of the respective swivel. All assembly stands include 4*6.5 mm black SPE micro-tube. Other stand combinations can be ordered based on the attached flowchart which can help determine the desired product requirement. 58 GYRONE TTM UD SPRINKLERS 2019 V1.0 Missing catalog numbers available upon request. Background color defines the code color of the respective swivel. All assembly stands include 4*6.5 mm black SPE micro-tube. Other stand combinations can be ordered based on the attached flowchart which can help determine the desired product requirement. SPRINKLERS 2019 V1.0 GYRONE TTM UD 59 GYRONETTM JET APPLICATIONS Designed for harsh water containing large amounts of sand thus causing excessive wear of standard rotating swivel. SPECIFICATIONS A static emitter. Micro-emitter, 5 different flow rates: 40, 58, 70, 90, 120 l/h. Nominal flow rates at 1.7 bar pressure. Maximum recommended working pressure: 2.5 bar. Recommended filtration: 200 micron / 80 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter. When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to NetafimTM expert team's instructions. 2 types of inlet connectors: Self tapping Press fit Upper bearing: Special type of upper bearing (square hole) holds the rotor from spinning 5 types of static deflectors: 360 degrees (12 jets ) 300 degrees (10 Jets) 2x90 (butterfly) (8 jets) 180 degrees (6 jets) 90 degrees (4 jets) All deflectors are colored Orange. FEATURES AND BENEFITS Anti-ant mechanism prevents insect penetration into the area of the micro-emitters nozzle. Static-emitter made of plastic materials resistant to all agrochemicals & weather conditions. Specially designed for fruit trees, orchards, deciduous and other tree crops. Long-term reliable service, simple, modular parts. 60 GYRONETTM JET SPRINKLERS 2019 V1.0 GYRONETTM TECHNICAL DATA MODEL NOZZLE CODE COLOR NOZZLE SIZE (MM) CONSTANT K EXPONENT X MAXIMUM WORKING PRESSURE (BAR) WETTED RADIUS (M) 20 CM ABOVE GROUND 360 DEGREES 300 DEGREES BUTTERFLY 180 DEGREES 12 JETS 10 JETS 2*4 JETS 6 JETS 90 DEGREES 4 JETS DEFLECTOR CODE COLOR 040 Blue 0.90 9.4 0.5 2.5 2.3 2.9 2.6 3.1 2.4 Orange 058 Gray 1.10 13.5 0.5 2.5 2.6 3.0 2.9 3.4 3.4 Orange 070 Black 1.20 17.4 0.5 2.5 2.8 3.4 3.0 3.4 3.7 Orange 090 Orange 1.40 22.4 0.5 2.5 3.2 3.6 3.2 4.0 3.0 Orange 120 Red 1.57 28.8 0.5 2.5 3.7 4.1 3.7 4.0 3.8 Orange PACKAGING DATA GYRONETTM JET Head only Complete stand (60 cm) w/stake Complete stand (60 cm) w/o stake Complete stand (90 cm) w/stake Complete stand (90 cm) w/o stake QUANTITY P/BOX UNITS 1000 100 250 150 200 BOX SIZE (CM X CM X CM) 28 x 28 x 57 18 x 34 x 79 18 x 34 x 79 28 x 27 x 113 28 x 27 x 113 BOX WEIGHT (KG) 12.5 6.3 7.1 7.6 8.1 BOXES P/PALLET 32 20 20 18 18 TOTAL UNITS P/PALLET 32000 2000 5000 2700 3600 PALLET WEIGHT (KG) 412 137 153 147 155 GYRONETTM JET Flowchart to determine the desired product definition How to use: To determine the desired product definition select one of every set of options displayed on the chart. EMITTER GyroNetTM JET GYR DISPERSION DEFLECTOR 12 jets , 360 degrees 12J 10 jets , 300 degrees 10J 8 jets , 2 x 90 degrees 8J 6 jets , 180 degrees 6J 4 jets , 90 degrees 4J HEAD INLET CONNECTOR Press fit male MIC Self tapping STIC UPPER BEARING Standard STUB FLOW 40 l/h 040 58 l/h 058 70 l/h 070 90 l/h 090 120 l/h 120 STAND ASSEMBLY Head only HEAD ONLY Head + 60 cm 60CM microtube + Stake W/STK Head + 60 cm microtube 60CM W/OSTK CONNECTOR TO LATERAL Barb BC Press fit PFC 3/8" conic 3/8C press fit Head + 90 cm 90CM microtube + Stake W/STK Head + 90 cm microtube 90CM W/OSTK Head + XXX cm STL microtube + Stake W/STK Head + XXX cm microtube STL W/OSTK *When selecting an undefined tube length, add the desired length in writing. ACCESSORIES AD valve 1.5/0.7 AD15 bar GYR STUB SPRINKLERS 2019 V1.0 GYRONETTM JET 61 GYRONETTM JET 12 jets, head only Catalog number : 64000 - (any of below 6 digits) MODEL 040 058 070 090 120 STIC 001015 002310 018000 MIC 020310 021562 021610 022856 GYRONETTM JET 10 jets, head only Catalog number : 64000 - (any of below 6 digits) MODEL 040 058 070 090 120 STIC 016670 002266 MIC 021563 GYRONETTM JET 8 jets, head only Catalog number : 64000 - (any of below 6 digits) MODEL 040 058 070 090 120 STIC 016700 018005 MIC 020320 GYRONETTM JET 6 jets, head only Catalog number : 64000 - (any of below 6 digits) MODEL 040 058 070 090 120 STIC MIC 020325 021565 021625 022859 022920 GyroNetTM Jet MIC, press fit, male inlet connector GyroNetTM Jet STIC, self tapping inlet connector GYRONETTM JET 4 jets, head only Catalog number : 64000 - (any of below 6 digits) MODEL STIC 040 058 070 090 120 MIC 020330 021630 021635 GYRONETTM JET assembly stands Catalog number : 64000 - (any of below 6 digits) MODEL 040 058 GYR JET 12 JET MIC STUB XXX 60CM W/STK BC 020311 GYR JET 10 JET MIC STUB XXX 60CM W/STK BC GYR JET 8 JET (2*90) MIC STUB XXX 60CM W/STK BC GYR JET 6 JET MIC STUB XXX 60CM W/STK BC GYR JET 4 JET MIC STUB XXX 60CM W/STK BC 020326 020332 070 090 120 022870 Missing catalog numbers available upon request. Background color defines the code color of the respective deflector. All assembly stands include 4*6.5 mm black SPE micro-tube. Other stand combinations can be ordered based on the attached flowchart which can help determine the desired product requirement. 62 GYRONETTM JET SPRINKLERS 2019 V1.0 GYRONETTM COMPONENTS STANDARD UPPER BEARING CIRCULAR HOLE - TO BE USED ON ALL GYRONETTM MICRO- SPRINKLERS STANDARD UPPER BEARING SQUARE HOLE - TO BE USED ON ALL GYRONETTM MICRO-JETS (GRAY) 1 unit 63520-005450 100 units/bag 63520 -005470 1 unit 63520-005400 100 units/bag 63520-005420 EVERSPINTM UPPER BEARING CIRCULAR HOLE - TO BE USED ON ALL GYRONETTM MICRO- SPRINKLERS IN HARSH WATER CONDITIONS 1 unit 63520-011400 100 units/bag 63520-011425 FRAME 1 unit 63520-005500 10 units/bag 63520-005525 100 units/bag 63520-005510 STREAM SPLITTER 1 unit 63520-005800 10 units/bag 100 units/bag 63520-005830 LR SWIVEL (PURPLE) TO BE USED WITH 27, 40 L/H 1 unit 63520-005100 10 units/bag 63520-005102 100 units/bag 63520-005115 LR SWIVEL (BLACK) TO BE USED WITH 58, 70, 90, 120 L/H 1 unit 63520-005000 10 units/bag 63520-005005 100 units/bag 63520-005010 LRD SWIVEL (PURPLE) TO BE USED WITH 27, 40 L/H 1 unit 63520-005160 10 units/bag 63520-005165 100 units/bag 63520-005170 LRD SWIVEL (BLACK) TO BE USED WITH 58, 70, 90, 120 L/H 1 unit 63520-005150 10 units/bag 100 units/bag 63520-005155 UD SWIVEL (GREEN) W/SLEEVE TO BE USED WITH 40, 58, 70 L/H 1 unit 63520-005180 10 units/bag 63520-005185 100 units/bag 63520-005188 LR SWIVEL (GRAY) TO BE USED WITH 150, 200, 250, 300 L/H 1 unit 63520-005120 10 units/bag 63520-005122 100 units/bag 63520-005125 MALE (PRESS-FIT) INLET CONNECTOR SELF-TAPPING INLET CONNECTOR 3/8" THREADED MALE INLET CONNECTOR GYRONETTM BODY NOZZLES SPRING UPPER BEARING CIRCULAR HOLE - TO BE USED ON UD GYRONETTM MICRO- SPRINKLERS 1 unit 63520-011500 100 units/bag 63520-011530 SPRING EVERSPINTM UPPER BEARING - TO BE USED ON UD GYRONETTM MICRO- SPRINKLERS IN HARSH WATER CONDITIONS 1 unit 63520-011300 100 units/bag SR SWIVEL (BLUE) TO BE USED WITH ALL FLOWS 1 unit 63520-005200 10 units/bag 63520-005205 100 units/bag 63520-005220 SRD SWIVEL (BLUE) TO BE USED WITH ALL FLOWS 1 unit 63520-005300 10 units/bag 100 units/bag 63520-005310 STATIC DEFLECTORS TO BE USED WITH 40, 58, 70, 90, 120 L/H 12 jets (360 degrees) 10 jets (300 degrees) 8 jets (2*90 degrees) 6 jets (180 degrees) 4 jets (90 degrees) 1 unit 100 units/bag 63520-005350 63520-005355 63520-005360 63520-005365 63520-005370 63520-005375 63520-005380 63520-005385 63520-005390 63520-005397 27 l/h, Brown 40 l/h, Blue 58 l/h, Gray 70 l/h, Black 90 l/h, Orange 120 l/h, Red 150 l/h, Sky Blue 200 l/h, Yellow 250 l/h, Purple 300 l/h, Green 64020-000800 64020-001000 64020-001130 64020-001300 64020-001310 64020-001500 64020-001700 64020-001750 64020-001850 64020-001950 64020-000900 64020-001100 64020-001150 64020-001200 64020-001210 64020-001400 64020-001600 N/A N/A N/A N/A N/A N/A 64020-001190 64020-001320 64020-001560 64020-001730 64020-001775 64020-001776 64020-001777 SPRINKLERS 2019 V1.0 GYRONETTM JET 63 VIBRONETTM SD APPLICATIONS Orchards, deciduous and tree crops irrigation. SPECIFICATIONS Bridgeless micro emitter with vibrating action. Micro-emitter, 3 different flow rates: 30, 50, 70 l/h. Nominal flow rates at 1.5 bar pressure. Recommended working pressure: 1.0 - 2.0 bar. Recommended filtration: 130 micron / 120 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter. When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to NetafimTM expert team's instructions. Inlet connector: press fit. FEATURES AND BENEFITS Excellent uniformity distribution as a single emitter. Operation of this emitter is based on vibration. Water passage through the nozzle causes needle vibration which in turn breaks up the water jet into uniform droplets that are evenly spread. Large drops suitable for open field conditions. No mist / wind-borne small drops. Relatively small wetting diameter, suits especially densely planted fruit tree crops. Constantly self-cleaning, the vibrating system does not allow for build up of mineral deposits in the nozzle. Micro-emitter made of plastic materials resistant to all agrochemicals & weather conditions. 64 VIBRONETTM SD SPRINKLERS 2019 V1.0 VIBRONETTM SD TECHNICAL DATA MODEL FLOW RATE NOZZLE CODE COLOR (L/H)* 30 28.6 Green + Sky Blue 50 50.5 Green + Light Gray 70 72.9 Black + Black * at 1.5 bar working pressure PIN CODE COLOR Light Gray Orange Orange NOZZLE WATER PASSAGES AREA (MM²) 0.7 1.9 3.0 NOZZLE SMALLER CONSTANT EXPONENT WETTED DIAMETER (M) WATER PASSAGES 20 CM ABOVE GROUND* (MM) K X 0.34 6.6 0.54 1.5 0.68 11.7 0.54 1.7 0.99 16.9 0.54 2.0 PACKAGING DATA Head only VIBRONETTM SD QUANTITY P/BOX UNITS 3200 BOX SIZE (CM X CM X CM) 28 x 28 x 57 BOX WEIGHT (KG) 19.2 BOXES P/PALLET 32 TOTAL UNITS PALLET WEIGHT P/PALLET (KG) 102400 614 VIBRONETTM SD Flowchart to determine the desired product definition How to use: To determine the desired product definition select one of every set of options displayed on the chart. EMITTER VibroNetTM SD VBN SD HEAD INLET CONNECTOR Press fit MIC FLOW 30 l/h 030 50 l/h 050 70 l/h 070 STAND ASSEMBLY Head only HEAD ONLY Head + 60 cm microtube 60CM W/OSTK Head + 90 cm microtube 90CM W/OSTK Head + XXX cm microtube STL W/OSTK *When selecting an undefined tube length, add the desired length in writing. CONNECTOR TO LATERAL Barb BC Press fit PFC 3/8" conic press fit 3/8C ACCESSORIES AD valve 1.5/0.7 bar AD15 VBN SD MIC VIBRONETTM SD Head only (with male inlet connector) Catalog number: 64300 - (any of below 6 digits ) MODEL 030 010000 050 011000 070 012000 VibroNetTM SD assembly stand (sample) VBN SD 70L/H 60CM W/STAKE CLIP BC 64300-012100 VBN SD 50L/H 60CM W/STAKE CLIP BC 64300-011500 SPRINKLERS 2019 V1.0 VIBRONE TTM SD VibroNetTM SD 65 CONNECTORS AND STAND ACCESSORIES SUPERNETTM STAKE ADAPTER TO METAL/ FIBERGLASS RODS 6.0 mm rod (Blue) 63520-005950 8.0 mm rod (Black) 63520-005970 CLAMP FOR WOOD POLES Colored Blue 63520-005900 Colored Brown 63520-010350 Colored Black 63520-010450 UNIVERSAL STAKE 64420-003100 CLAMP FOR METAL STAKES 64420-003010 UNIVERSAL ADAPTER TO METAL/FIBERGLASS ROD CLIP STAKE Colored Blue 63000-009870 Colored Black 63000-009860 METAL ROD Colored Blue 63000-009800 Colored Black 63000-009750 Colored Brown 63000-009850 PIN STAKE 50CM + ADAP.FIT 4*6.5 63000-019120 To 4.5 mm dia. rod, 4*6.5 mm micro-tube, colored black 64020-002150 To 6.0 mm dia. rod, 4*6.5 mm micro-tube, colored blue 64020-002000 To 8.0 mm dia. rod, 4*6.5 mm micro-tube, colored black 64020-002100 To 6.0 mm dia. rod, 6*8 mm micro-tube, colored blue 64020-003100 To 6.0 mm dia. rod, 9*11/9*12 mm micro-tube, colored blue 64020-003150 To 8.0 mm dia. rod, 9*11/9*12 mm micro-tube, colored black 64020-003170 6.0 mm dia., 60 cm length 65080-001000 6.0 mm dia., 100 cm length 65080-001100 6.0 mm dia., 120 cm length 65080-001200 8.0 mm dia., 60 cm length 65080-001500 8.0 mm dia., 100 cm length 65080-001600 8.0 mm dia., 120 cm length 65080-001700 COMPLETE STAND W/O STAKE FEMALE PRESS FIT CONN. + 0.6 METER 6*8 TUBE + BARB/MALE CONN., THESE 3 PRODUCTS ARE SUPPLIED ASSEMBLED, AND AS SEPARATED PRODUCTS IN THE SAME BOX: FLAT FEMALE/BARB CONN. + STAKE ADAPTER THAT FIT A 6 MM ROD 64020-005600 COMPLETE STAND W/O STAKE FEMALE PRESS FIT CONN. + 1.2 METER 8*6 TUBE + BARB/MALE F&S CONN., THESE 3 PRODUCTS ARE SUPPLIED ASSEMBLED, AND AS SEPARATED PRODUCTS IN THE SAME BOX: FLAT FEMALE/BARB S&F CONN. + STAKE ADAPTER THAT FIT A 6 MM ROD 64520-001990 66 VIBRONETTM SD SPRINKLERS 2019 V1.0 BARB/MALE PRESS-FIT CONNECTOR (BLACK) BARBED, PRESSURE MEASURING POINT BARB/FLAT FEMALE PRESS-FIT CONNECTOR 63000-002000 BARB/BARB CONNECTOR (BLACK) 63520-006000 BARB/SELF TAPPING CONNECTOR (BLACK) 63520-006100 SELF TAPPING/SELF TAPPING CONNECTOR (BLACK) 63000-002800 1/4" UNF MALE THREADED, PRESSURE MEASURING POINT ON A PVC PIPE, DRILL: 5.2 MM SCREW-TAP: 1/4-28 UNF 63000-002700 1/8" BSP MALE THREADED, PRESSURE MEASURING POINT ON A PVC PIPE, DRILL: 8.5 MM SCREW-TAP: 1/8-28 BSP 63000-002750 "U" SHAPE FOR UPRIGHT HANGING 63000-002450 PLUG (BLUE) 63000-002400 MALE THREADED / FEMALE PRESS-FIT 3/8" Threaded male/ female conn. 63000-001150 1/2" Threaded male/ female conn. 63000-001180 SUPERNETTM AND GYRONETTM NOZZLE CLEANING TOOL 63520-006150 BARB/FEMALE PRESS-FIT CONNECTOR (BLACK) 63520-005990 ADAPTER BARB-3/8" FEMALE THREADED 63000-001900 ADAPTER FEMALE THREADED/FEMALE PRESS-FIT 1/2" female threaded / female press-fit conn 63000-001200 3/4" female threaded / female press-fit conn 63000-001300 Barb (for 9*11/9*12 mm tube) / 3/8" female threaded 63000-001835 ADAPTER BARB/FEMALE PRESS-FIT Adapter barb (for 6*8 mm tube) / female press-fit connector 64020-002750 Adapter barb (for 9*12 mm tube) / female pressfit connector 64020-002760 63520-011000 SPRINKLERS 2019 V1.0 VIBRONETTM SD 67 PC SPRAY STAKES PRESSURE COMPENSATED SPRAY STAKE APPLICATIONS For all mini-spray nurseries and greenhouses applications. SPECIFICATIONS High flow rates to supply correct irrigation in large pots/growing bags. PC spray stake is ideal for any application in which a soil wetting mini spray pattern is desired. PC spray stake is manufactured with UV resistant resin to provide years of trouble-free service in both indoor and outdoor applications. Optional CNL (anti drain system). 2 spray patterns adaptable to suit every substrate surface or container. Recommended filtration: 130 micron / 120 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter. When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to NetafimTM expert team's instructions. FEATURES AND BENEFITS Pressure compensated flow ensuring constant flow rate at varying inlet pressures. Optional CNL: When pressure in the pipes drops (after valves shut off at the end of an irrigation cycle) and the desired pressure is achieved, the CNL mechanism closes the water passage. The pipes remain full of water and ready for the next cycle. Ensures uniform water and nutrient distribution during irrigation. Allows the installation of spray stake systems in areas with steeper slopes. Uniform wetting pattern over the entire surface. Horizontal connection. Water flow blockage mechanism to function when a pot is sold and/ or shifted from position to prevent water and fertilizer loss. Pre-assembled components for easy of use. Excellent performance. 68 PC SPRAY STAKES SPRINKLERS 2019 V1.0 PC SPRAY STAKE COMPONENTS NOMINAL FLOW RATE (L/H)* 12 20 20 25 25 30 30 35 35 40 40 SPRAY STAKE COLOR CODE Fuchsia Gray Light Gray Gray Light Gray Brown Light Brown Blue Light Blue Blue Light Blue SPREAD DESCRIPTION One side One side Two sides One side Two sides One side Two sides One side Two sides One side Two sides AVERAGE WETTED RADIUS (M)** 0.22-0.25 0.22-0.25 0.22-0.25 0.22-0.25 0.22-0.25 0.22-0.25 0.22-0.25 0.22-0.25 0.22-0.25 0.22-0.25 0.22-0.25 * Within pressure range 1.5-4.0 bar (1.8-4.0 bar in the 40 l/h model) **To each side, wetted radius will change at different height above ground of the spray head PACKAGING DATA QUANTITY P/BOX UNITS 500 BOX SIZE (CM X CM X CM) 27 x 28 x 113 BOX WEIGHT (KG) 9.5 PC SPRAY STAKES ASSEMBLY , PCJ HF YY l/h , 3*5 mm micro-tube 100 cm length, elbow adapter Catalog number : 40200 - (any of below 6 digits) PCJ MODEL PC SPRAY STAKE 12 l/h Fuchsia 20 l/h Gray 20 l/h Light Gray 25 l/h Gray 25 l/h Light Gray 30 l/h Brown 30 l/h Light Brown 35 l/h Blue 35 l/h Light Blue 40 l/h Blue 40 l/h Light Blue *Can be ordered with different micro-tube lengths WATER DISTRIBUTION One side One side Two sides One side Two sides One side Two sides One side Two sides One side Two sides FLOW REGULATOR CODE COLOR Fuchsia + Black Orange + Black Orange + Black Orange + Light Gray Orange + Light Gray Orange + Brown Orange + Brown Orange + Light Blue Orange + Light Blue Orange + Blue Orange + Blue BOXES P/PALLET 16 1 UNIT 035100 035200 035300 035400 035500 037200 037300 037600 037700 037800 037900 PC-CNL SPRAY STAKES ASSEMBLY , PCJ-CNL HF YY l/h , 3*5 mm micro-tube 100 cm length, elbow adapter Catalog number : 40200 - (any of below 6 digits) PCJ MODEL PC SPRAY STAKE 12 l/h Fuchsia 20 l/h Gray 20 l/h Light Gray 25 l/h Gray 25 l/h Light Gray 30 l/h Brown 30 l/h Light Brown 35 l/h Blue 35 l/h Light Blue 40 l/h Blue 40 l/h Light Blue *Can be ordered with different micro-tube lengths WATER DISTRIBUTION One side One side Two sides One side Two sides One side Two sides One side Two sides One side Two sides 1 UNIT 036000 036100 036200 036300 036400 038500 038600 038700 038800 038900 039000 SPRINKLERS 2019 V1.0 PC SPRAY STAKES 69 SPRAY STAKE APPLICATIONS Greenhouses, nurseries, garden pot irrigation. SPECIFICATIONS Maximal working pressure: 2.0 bar. Recommended filtration : 130 micron / 120 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter. When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to NetafimTM expert team's instructions. Made of durable plastic with high levels of UV inhibitors. Available in three colors for easy identification of flow rates: 12 l/h Yellow 17 l/h Green 22 l/h Black Container size recommendations: 12 to 20 liters - Yellow Spray Stake 20 to 40 liters - Green Spray Stake 40 to 120 liters - Black Spray Stake To be "inserted" into a 3*5 mm micro-tube. FEATURES AND BENEFITS Allow distribution of water over relatively large pot plant areas. NetafimTM Spray Stakes now have a spray direction indicator for faster, accurate installations. The directional indicator provides a hand-feel as well as visual cue to the spray direction so installers don't need to stop and study each stake to ensure proper spray direction. NetafimTM Spray Stakes feature close-off capabilities that are simple and quick , remove the tubing from the top of the Spray Stake and attach the tubing to the close-off nipple located on the side of the stake.. This eliminates dirt getting jammed into the tubing and provides a highly visible cue that the stake is closed, not open. Allows maximum flexibility in greenhouse and nurseries (with soft PE micro-tubes). Allows installation with NetafimTM On line PC drippers, to add compensated and anti-drain functionality. 70 SPRAY STAKE SPRINKLERS 2019 V1.0 SPRAY STAKE TECHNICAL DATA MAXIMUM WORKING PRESSURE (BAR) NOMINAL FLOW RATE (L/H)* WATER PASSAGES DIMENSIONS** WIDTH (MM) DEPTH (MM) LENGTH (MM) 12.0 1.04 2.0 17.0 1.34 22.0 1.57 * At 1.0 bar pressure **The Spray Stake water passages has a triangular shape 0.73 10.50 1.05 10.50 1.30 10.50 CONSTANT K 3.795 5.376 6.957 EXPONENT X 0.50 0.50 0.50 PACKAGING DATA STAKE MODEL Yellow Green Black NOMINAL FLOW (L/H) 12 17 22 QUANTITY UNITS 2000 2000 2000 DIMENSIONS (CM X CM X CM) 28 x 28 x 57 28 x 28 x 57 28 x 28 x 57 BOX WEIGHT (KG) 5.5 5.5 5.5 SPRAY STAKES Catalog number : 22500 - (any of below 6 digits ) MODEL 12 17 22 1 UNIT 001000 001100 001200 SPRAY STAKES ACCESSORIES Butterfly stopper Extension unit 1 unit 100/bag 1 unit 50/bag 22500-001300 22500-001330 22500-001400 22500-001420 SPRINKLERS 2019 V1.0 SPRAY STAKE 71 SPINNETTM BRIDGELESS MICRO-SPRINKLER APPLICATIONS Greenhouses, Nurseries, Net-houses. SPECIFICATIONS Bridgeless design. Micro-sprinkler, 6 different flow rates: 50, 70, 90, 120, 160, 200 l/h. Nominal flow rates at 2.3 bar pressure. Recommended working pressure: 2.0 up to 3.0 bar. Recommended filtration : 130 micron / 120 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter. When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to NetafimTM expert team's instructions. Inlet connector: Press fit. 3 different rotors: LR - High trajectory, colored Green FLT - Flat distributor, colored Gray SR - Low trajectory , colored Blue SpinNetTM micro-sprinklers meet ISO 8026 standards (SI 1406) with production certified by the Israel Standards Institute (SII). FEATURES AND BENEFITS SpinNetTM micro-sprinklers are constructed without a "bridge" to retain the spinner, producing a drip-less operation. This means that plants located below the sprinklers are not damaged from water dripping off the sprinkler. SpinNetTM hangs below the supply pipe preventing wetting of the pipe and dripping onto the plants below. Interchangeable components. SpinNetTM micro-sprinklers can be disassembled by hand should they need cleaning no tools are required. Acid resistant (AA) raw materials, thus allowing the application chemicals to pass through the system. The system can be cleaned by application of suitable acid treatments. Excellent uniformity distribution on a full coverage irrigation system. Strongly recommended to connect the SpinNetTM to the distribution pipe with a SSPE (super soft PE) micro-tube, a specifically designed stabilizer and AD valve (anti-drain) that will prevent distribution pipe drainage. 72 SPINN ETTM SPRINKLERS 2019 V1.0 SPINNETTM TECHNICAL DATA MODEL NOZZLE CODE COLOR NOZZLE SIZE (MM) RECOMMENDED WORKING PRESSURE (BAR) CONSTANT K EXPONENT X WETTED DIAMETER (M)** SWIVEL (ROTOR) CODE COLOR LR 050 Green 0.90 2.0 to 3.0 10.5 0.5 N/A N/A 070 Black 1.07 2.0 to 3.0 14.0 0.5 8.0 Green 090 Orange 1.22 2.0 to 3.0 18.9 0.5 8.5 Green 120 Red 1.44 2.0 to 3.0 25.0 0.5 8.5 Green 160 Brown 1.76 2.0 to 3.0 33.6 0.5 9.0 Green 200 Yellow 1.86 2.0 to 3.0 41.4 0.5 9.5 Green **The wetted diameter was measured at 1.5 meters height and at 2.5 bar working pressure WETTED DIAMETER (M)** N/A 7.5 8.5 8.5 9.0 9.0 SWIVEL (ROTOR) CODE COLOR FTL N/A Gray Gray Gray Gray Gray WETTED DIAMETER (M)** SWIVEL (ROTOR) CODE COLOR SR 6.0 Blue 6.5 Blue 6.5 Blue 6.5 Blue 6.5 Blue 7.0 Blue PACKAGING DATA SPINNETTM QUANTITY P/BOX UNITS Head only 1500 Complete stand, 15 cm tube w/stabilizer and AD valve 200 Complete stand, 30 cm tube w/stabilizer and AD valve 200 Complete stand, 60 cm tube w/stabilizer and AD valve 150 Complete stand, 90 cm tube w/stabilizer and AD valve 200 BOX SIZE (CM X CM X CM) 28 x 28 x 57 28 x 28 x 57 28 x 28 x 57 18 x 34 x 79 28 x 27 x 113 BOX WEIGHT BOXES (KG) P/PALLET 11.5 32 13.1 32 14.8 32 12.4 20 15.8 16 TOTAL UNITS PALLET WEIGHT P/PALLET (KG) 48000 380 6400 419 6400 486 2000 249 3200 253 SPINNETTM Flowchart to determine the desired product definition How to use: To determine the desired product definition select one of every set of options displayed on the chart. EMITTER SpinNetTM SPNT DISPERSION DEFLECTOR High trajectory LR Flat distribution FLT Low trajectory SR HEAD INLET CONNECTOR Press fit male MIC SPNT MIC FLOW 50 l/h 050 70 l/h 070 90 l/h 090 120 l/h 120 160 l/h 160 200 l/h 200 STAND ASSEMBLY Head only HEAD ONLY Head + 15 cm microtube + Stabilizer Head + 30 cm microtube + Stabilizer Head + 60 cm microtube + Stabilizer Head + 90 cm microtube + Stabilizer Head + XXX cm microtube + Stabilizer 15CM W/STB 30CM W/STB 60CM W/STB 90CM W/STB XXXCM W/STB *When selecting an undefined tube length, add the desired length in writing. ** standard supplied micro-tube : 4*6.5 SSPE colored light gray CONNECTOR TO LATERAL Barb BC Press fit PFC 3/8" conic 3/8C press fit M11 press fit M11C ACCESSORIES AD valve 1.5/0.7 bar AD valve 2.0/0.9 bar AD15 AD20 SPRINKLERS 2019 V1.0 SPINN ETTM 73 SPINNETTM Head only Catalog number: 64200 - (any of below 6 digits) MODEL 050 070 090 120 160 200 LR FLT SR 1 Unit N/A 010000 013000 017500 020000 021300 100 Units/bag N/A 010020 013020 017520 020020 021320 1 Unit N/A 005000 006000 007000 007500 008000 100 Units/bag N/A 005002 006010 007010 007510 008005 1 Unit 023000 024000 025000 026000 027000 028000 100 Units/bag 023010 024020 025020 026020 027020 028020 SPINNETTM Head + AD valve 20 Catalog number : 64200 - (any of below 6 digits) MODEL LR FLT SR 050 N/A 070 010070 090 120 160 200 N/A 005075 SpinNetTM LR, green swivel SpinNetTM FLT, gray swivel SpinNetTM SR, Blue swivel SPINNETTM ASSEMBLY STANDS SpinNetTM , UD stand, LR swivel , Flow YYY , micro-tube length XXX , stabilizer , barb connector to lateral pipe , AD valve 20 , Catalog number : 64200 - (any of below 6 digits) MODEL 070 090 120 160 200 15 CM 30 CM 010400 013600 018200 020800 022000 60 CM 010180 90 CM 022500 SpinNetTM , UD stand, LR swivel , Flow YYY , micro-tube length XXX , stabilizer , press-fit connector to lateral pipe, AD valve 20 , Catalog number : 64200 - (any of below 6 digits) MODEL 15 CM 30 CM 60 CM 90 CM 070 010200 010410 010170 090 013300 013320 120 017800 018250 160 020105 020910 200 021600 022100 SpinNetTM , UD stand, FLT swivel , Flow YYY , micro-tube length XXX , stabilizer , barb connector to lateral pipe , AD valve 20, Catalog number : 64200 - (any of below 6 digits) MODEL 15 CM 30 CM 60 CM 90 CM 070 005009 005100 005120 005400 090 006100 006145 120 007100 007120 007320 160 007750 200 008100 SPINNETTM ASSEMBLY STANDS SpinNetTM , UD stand, LR swivel , Flow YYY , micro-tube length XXX , stabilizer, barb connector to lateral pipe and AD valve 15, Catalog number : 64200 - (any of below 6 digits) MODEL 070 090 120 160 200 15 CM 010110 30 CM 010350 013150 017660 60 CM 010160 013185 90 CM SpinNetTM , UD stand, LR swivel , Flow YYY , micro-tube length XXX , stabilizer, press-fit connector to lateral pipe and AD valve 15, Catalog number : 64200 - (any of below 6 digits) MODEL 15 CM 30 CM 60 CM 90 CM 070 010100 010360 010150 090 013100 013155 013180 120 017600 017650 017700 160 020100 020190 021500 200 021400 021450 SpinNetTM , UD stand, FLT swivel , Flow YYY , micro-tube length XXX , stabilizer, barb connector to lateral pipe and AD valve 15, Catalog number : 64200 - (any of below 6 digits) MODEL 15 CM 30 CM 60 CM 90 CM 070 005008 005005 005032 005050 090 006032 006050 006065 120 007017 007027 007037 160 007710 200 74 SPINN ETTM SPRINKLERS 2019 V1.0 SpinNetTM , UD stand, FLT swivel , Flow YYY , micro-tube length XXX , stabilizer , press-fit connector to lateral pipe , AD valve 20 ,Catalog number : 64200 - (any of below 6 digits) MODEL 15 CM 30 CM 60 CM 90 CM 070 005080 005150 005300 090 006070 006120 006140 120 007045 007150 007200 007330 160 007850 200 008070 008150 008300 SpinNetTM , UD stand, FLT swivel , Flow YYY , micro-tube length XXX , stabilizer ,press-fit connector to lateral pipe and AD valve 15, Catalog number : 64200 - (any of below 6 digits) MODEL 15 CM 30 CM 60 CM 90 CM 070 005010 005020 005030 090 006020 006030 006060 120 007015 007025 007035 160 007600 007980 200 007940 007960 SpinNetTM , UD stand, SR swivel , Flow YYY , micro-tube length XXX , stabilizer , barb connector to lateral pipe, AD valve 20 , Catalog number : 64200 - (any of below 6 digits) SpinNetTM , UD stand, SR swivel , Flow YYY , micro-tube length XXX , stabilizer , barb connector to lateral pipe, AD valve 15 , Catalog number : 64200 - (any of below 6 digits) MODEL 050 070 090 120 160 200 15 CM 004110 026300 30 CM 025100 026350 60 CM 90 CM 026370 MODEL 050 070 090 120 160 200 15 CM 004100 026100 30 CM 013150 017660 60 CM 90 CM SpinNetTM , UD stand, SR swivel , Flow YYY , micro-tube length XXX , stabilizer , press-fit connector to lateral pipe, AD valve 20 , Catalog number : 64200 - (any of below 6 digits) SpinNetTM , UD stand, SR swivel , Flow YYY , micro-tube length XXX , stabilizer , press-fit connector to lateral pipe, AD valve 15 , Catalog number : 64200 - (any of below 6 digits) MODEL 050 070 090 120 160 200 15 CM 026360 30 CM 023020 026150 60 CM 90 CM MODEL 050 070 090 120 160 200 15 CM 30 CM 60 CM Missing catalog numbers available upon request. Background color defines the code color of the respective swivel. All assembly stands include 4*6.5 mm gray SSPE micro-tube. Other stand combinations can be ordered based on the attached flowchart which can help determine the desired product requirement. 90 CM SPINNETTM COMPONENTS SPINNETTM BODY NOZZLE 50 l/h, Green 70 l/h, Black 90 l/h, Orange 120 l/h, Red 160 l/h, Brown 200 l/h, Yellow 64220-003900 64220-004000 64220-004100 64220-004200 64220-004250 64220-004300 SPINNETTM DISTRIBUTION MECHANISM LR, long range distribution model, Green swivel FLT, flat distribution model, Gray swivel SR, short range distribution model, Blue swivel 64200-001020 64200-001000 64200-001030 SPRINKLERS 2019 V1.0 SPINN ETTM 75 SPINNETTM SD BRIDGELESS MICRO-SPRINKLER WITH SHOULDER DISTRIBUTOR APPLICATIONS Greenhouses, Nurseries, Tunnels. SPECIFICATIONS Micro-sprinkler with a specifically designed connector SD (shoulder distributor) that achieves excellent results when rectangular irrigation is needed. Bridgeless design. Micro-sprinkler, 6 different flow rates : 090/050, 120/070, 160/070, 160/090, 200/090, 200/120 l/h. Nominal flow rates at 2.0 bar pressure. Recommended working pressure: 2.0 up to 3.0 bar. Recommended filtration : 130 micron / 120 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter. When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to NetafimTM expert team's instructions. Inlet connector: Press fit. 3 different rotors: LR - High trajectory, colored Green FLT - Flat distributor, colored Gray SR - Low trajectory, colored Blue FEATURES AND BENEFITS Bridgeless design eliminates dripping. Interchangeable components. SpinNetTMSD micro-sprinklers can be disassembled by hand should they need cleaning - no tools are required. Acid resistant (AA) raw materials, thus allowing the application chemicals to pass through the system. The system can be cleaned by application of suitable acid treatments. Excellent uniformity distribution on a single irrigation line. Traditional sprinkler layout spaces the sprinklers "head to head" or at spacing equal to the radius of the sprinkler throw. For larger areas, the patterns are overlapped.The SpinNetTM SD solution avoids the problems of the traditional sprinkler layout and achieves a high level of uniformity within a closely spaced "strip of sprinklers". Specially designed to fully cover rectangular areas with excellent uniformity distribution and high percentage of the water within the required rectangular area. Strongly recommended to connect the SpinNetTMSD to the distribution pipe with a SSPE (super soft PE) micro-tube, a specifically designed stabilizer and AD valve (anti-drain) that will prevent distribution pipe drainage. 76 SPINNETTM SD SPRINKLERS 2019 V1.0 SPINNETTM SD TECHNICAL DATA MODEL NOMINAL FLOW RATE * NOZZLE CODE COLOR NOZZLE SIZE SD CONN NOZZLE SIZE (L/H) 090/050 52 120/070 68 160/070 79 160/090 88 200/090 92 200/120 123 *Nominal flow rate at 2.0 bar Orange + Orange Red + Red Brown + Red Brown + Brown Yellow + Brown Yellow + Yellow (MM) 1.22 1.44 1.76 1.76 1.86 1.86 (MM) 1.20 1.46 1.46 1.56 1.56 1.87 MODEL NOZZLE CODE COLOR WETTED DIAMETER (M)** SWIVEL (ROTOR) CODE COLOR LR MODEL WETTED DIAMETER (M)** 090/050 Orange + Orange N/A N/A N/A 120/070 Red + Red 7.5 Green 7.5 160/070 Brown + Red 6.5 Green 6.0 160/090 Brown + Brown 7.0 Green 6.5 200/090 Yellow + Brown 6.5 Green 6.5 200/120 Yellow + Yellow 8.0 Green 7.5 **The wetted diameter was measured at 1.5 meters height and at 2.5 bar working pressure CONSTANT K 11.6 15.2 17.7 19.7 20.6 27.5 SWIVEL (ROTOR) CODE COLOR FLT MODEL N/A Gray Gray Gray Gray Gray EXPONENT X 0.5 0.5 0.5 0.5 0.5 0.5 WETTED DIAMETER (M)** 5.5 6.0 5.5 5.5 5.5 6.5 RECOMMENDED WORKING PRESSURE (BAR) 2.0 to 3.0 2.0 to 3.0 2.0 to 3.0 2.0 to 3.0 2.0 to 3.0 2.0 to 3.0 SWIVEL (ROTOR) CODE COLOR SR MODEL Blue Blue Blue Blue Blue Blue PACKAGING DATA SPINNETTM SD Head & SD connector Complete stand (30 cm) w/stabilizer & AD valve Complete stand (60 cm) w/stabilizer & AD valve QUANTITY P/BOX UNITS 1250 150 100 BOX SIZE (CM X CM X CM) 18 x 34 x 79 28 x 28 x 57 18 x 34 x 79 BOX WEIGHT (KG) 12.9 11.5 8.4 BOXES P/PALLET 20 32 20 TOTAL UNITS P/PALLET 25000 4800 2000 PALLET WEIGHT (KG) 268 368 176 SPINNETTM SD Flowchart to determine the desired product definition How to use: To determine the desired product definition select one of every set of options displayed on the chart. EMITTER SpinNetTMSD SPNT SD DISPERSION DEFLECTOR High trajectory LR Flat distribution FLT Low trajectory SR HEAD INLET CONNECTOR Press fit male MIC SPNT SD MIC FLOW 90/50 l/h 090050 120/70 l/h 120070 160/70 l/h 160070 160/90 l/h 160090 200/90 l/h 200090 200/120 l/h 200120 STAND ASSEMBLY Head only Head + 15 cm microtube + Stabilizer Head + 30 cm microtube + Stabilizer Head + 60 cm microtube + Stabilizer Head + 90 cm microtube + Stabilizer Head + XXX cm microtube + Stabilizer HEAD ONLY 15CM W/STB 30CM W/STB 60CM W/STB 90CM W/STB XXXCM W/STB *When selecting an undefined tube length, add the desired length in writing. ** standard supplied micro-tube : 4*6.5 SSPE colored light gray CONNECTOR TO LATERAL Barb BC Press fit PFC 3/8" conic 3/8C press fit M11 press fit M11C ACCESSORIES AD valve 1.5/0.7 bar AD valve 2.0/0.9 bar AD15 AD20 SPRINKLERS 2019 V1.0 SPINNETTM SD 77 SPINNETTM SD Head only Catalog number: 64200 - (any of below 6 digits) MODEL 090050 120070 160070 160090 200090 200120 LR FLT SR 1 Unit N/A 010750 012250 013950 014090 014720 25 Units/bag N/A 010760 013960 1 Unit N/A 001250 001460 001600 001780 001840 25 Units/bag N/A 001255 001785 1 Unit 031950 032000 032950 033000 033100 034000 25 Units/bag 032010 033010 SPINNETTM SD Head + AD valve 20 Catalog number : 64200 - (any of below 6 digits) MODEL LR FLT SR 090050 120070 160070 160090 200090 200120 1 Unit N/A 010800 014000 018700 25 Units/bag 010805 014005 1 Unit N/A 001300 001490 001650 001800 001850 25 Units/bag 001302 001805 001855 1 Unit 032020 033020 25 Units/bag 032030 033030 SpinNetTM SD LR, green swivel SpinNetTM SD FLT, gray swivel SpinNetTM SD SR, Blue swivel SPINNETTM SD ASSEMBLY STANDS SpinNetTM SD , UD stand, LR swivel , Flow YYY , micro-tube length XXX , stabilizer , barb connector to lateral pipe , AD valve 20, Catalog number : 64200 - (any of below 6 digits) MODEL 15 CM 30 CM 60 CM 90 CM 090050 120070 011500 011800 160070 160090 014600 200090 014700 200120 SpinNetTM , UD stand, LR swivel , Flow YYY , micro-tube length XXX , stabilizer , press-fit connector to lateral pipe, AD valve 20 , Catalog number : 64200 - (any of below 6 digits) MODEL 15 CM 30 CM 60 CM 90 CM 090050 120070 011805 011810 160070 001675 160090 014652 200090 200120 SPINNETTM SD ASSEMBLY STANDS SpinNetTM SD , UD stand, LR swivel , Flow YYY , micro-tube length XXX , stabilizer , barb connector to lateral pipe, AD valve 15, Catalog number : 64200 - (any of below 6 digits) MODEL 15 CM 30 CM 60 CM 90 CM 090050 120070 160070 160090 200090 200120 SpinNetTM , UD stand, LR swivel , Flow YYY , micro-tube length XXX , stabilizer , press-fit connector to lateral pipe, AD valve 15 , Catalog number : 64200 - (any of below 6 digits) MODEL 15 CM 30 CM 60 CM 90 CM 090050 120070 011900 160070 160090 014550 014740 014660 200090 014310 200120 78 SPINNETTM SD SPRINKLERS 2019 V1.0 SpinNetTM SD , UD stand, FLT swivel , Flow YYY , micro-tube length XXX , stabilizer , barb connector to lateral pipe, AD valve 20, Catalog number : 64200 - (any of below 6 digits) MODEL 090050 120070 160070 160090 200090 200120 15 CM 002000 30 CM 001100 002100 60 CM 90 CM 002020 SpinNetTM SD , UD stand, FLT swivel , Flow YYY , micro-tube length XXX , stabilizer , barb connector to lateral pipe, AD valve 15, Catalog number : 64200 - (any of below 6 digits) MODEL 090050 120070 160070 160090 200090 200120 15 CM 30 CM 60 CM 90 CM SpinNetTM SD , UD stand, FLT swivel , Flow YYY , micro-tube length XXX , stabilizer , press-fit connector to lateral pipe, AD valve 20, Catalog number : 64200 - (any of below 6 digits) MODEL 090050 120070 160070 160090 200090 200120 15 CM 001110 001305 30 CM 001310 001520 001655 002080 60 CM 90 CM 001380 002030 SpinNetTM SD , UD stand, FLT swivel , Flow YYY , micro-tube length XXX , stabilizer, press-fit connector to lateral pipe, AD valve 15, Catalog number : 64200 - (any of below 6 digits) MODEL 090050 120070 160070 160090 200090 200120 15 CM 30 CM 001970 60 CM 001350 001670 001980 90 CM SpinNetTM SD , UD stand, SR swivel , Flow YYY , micro-tube length XXX, stabilizer, barb connector to lateral pipe, AD valve 20 ,Catalog number : 64200 - (any of below 6 digits) SpinNetTM SD , UD stand, SR swivel , Flow YYY , micro-tube length XXX , stabilizer , press-fit connector to lateral pipe , AD valve 20 ,Catalog number : 64200 - (any of below 6 digits) MODEL 090050 120070 160070 160090 200090 200120 15 CM 031960 30 CM 031980 60 CM 90 CM MODEL 090050 120070 160070 160090 200090 200120 15 CM 033050 30 CM 032050 60 CM 90 CM Missing catalog numbers available upon request. Background color defines the code color of the respective swivel. All assembly stands include 4*6.5 mm gray SSPE micro-tube. Other stand combinations can be ordered based on the attached flowchart which can help determine the desired product requirement. SPINNETTM SD COMPONENTS SPINNETTM BODY NOZZLE SPINNETTM SD (SHOULDER DISTRIBUTOR) DEVICE 90 l/h, Orange 120 l/h, Red 160 l/h, Brown 200 l/h, Yellow SPINNETTM DISTRIBUTION MECHANISM 64220-004100 64220-004200 64220-004250 64220-004300 090/050 Orange 120/070 Red 160/090 Brown 200/120 Yellow 63000-014250 63000-014300 63000-014350 63000-014400 LR, long range distribution model, Green swivel FLT, flat distribution model, Gray swivel SR, short range distribution model, Blue swivel 64200-001020 64200-001000 64200-001030 SPRINKLERS 2019 V1.0 SPINNETTM SD 79 VIBRONETTM APPLICATIONS Germination tables. SPECIFICATIONS Bridgeless micro emitter with vibrating action. Micro-emitter, 2 different flow rates: 40, 50 l/h. Nominal flow rates at 3.0 bar pressure. Recommended working pressure: 3.0 bar. Recommended filtration : 130 micron / 120 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter. When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to NetafimTM expert team's instructions. Inlet connector: press fit. FEATURES AND BENEFITS Excellent uniformity distribution on a full coverage irrigation system. Operation of this emitter is based on vibration, water passage through the nozzle causes needle vibration which in turn breaks up the water jet into uniform droplets that are evenly spread. Constantly self-cleaning, the vibrating system does not allow for build up of mineral deposits in the nozzle. Micro-emitter made of plastic materials resistant to all agrochemicals & weather conditions. Strongly recommended to connect the VibroNetTM to the distribution pipe with a SSPE (super soft PE) micro-tube, a purpose-designed weight and AD valve (anti-drain) to prevent distribution pipe drainage. 80 VIBRONETTM SPRINKLERS 2019 V1.0 VIBRONETTM TECHNICAL DATA MODEL FLOW RATE (L/H)* NOZZLE CODE COLOR 040 40.0 050 47.0 * at 3.0 bar working pressure Blue Green PIN CODE COLOR Gray Gray NOZZLE WATER PASSAGES AREA (MM²) 0.60 0.71 RECOMMENDED WORKING PRESSURE (BAR) 3.0 3.0 CONSTANT K 8.6 9.5 EXPONENT X 0.45 0.47 WETTED DIAMETER 150 CM ABOVE GROUND* (M) 4.0 4.0 PACKAGING DATA VIBRONETTM Head only Complete stand, 15 cm tube w/stabilizer and AD valve Complete stand, 30 cm tube w/stabilizer and AD valve Complete stand, 60 cm tube w/stabilizer and AD valve Complete stand, 90 cm tube w/stabilizer and AD valve QUANTITY P/BOX UNITS 3200 BOX SIZE (CM X CM X CM) 28 x 28 x 57 BOX WEIGHT (KG) 19.2 250 28 x 28 x 57 15.1 200 28 x 28 x 57 15.0 150 18 x 34 x 79 11.5 200 28 x 27 x 113 15.0 BOXES P/PALLET 32 32 32 20 16 TOTAL UNITS P/PALLET 102400 8000 6400 3000 3200 PALLET WEIGHT (KG) 614 484 480 230 240 VIBRONETTM Flowchart to determine the desired product definition How to use: To determine the desired product definition select one of every set of options displayed on the chart. EMITTER VibroNetTM VBN HEAD INLET CONNECTOR Press fit male MIC FLOW 40 l/h 040 50 l/h 050 STAND ASSEMBLY Head only Head + 15 cm microtube + Stabilizer Head + 30 cm microtube + Stabilizer Head + 60 cm microtube + Stabilizer Head + 90 cm microtube + Stabilizer Head + XXX cm microtube + Stabilizer HEAD ONLY 15CM W/STB 30CM W/STB 60CM W/STB 90CM W/STB XXXCM W/STB *When selecting an undefined tube length, add the desired length in writing. ** standard supplied micro-tube : 4*6.5 SSPE colored light gray CONNECTOR TO LATERAL Barb BC Press fit PFC 3/8" conic press fit 3/8C M11 press fit M11C ACCESSORIES AD valve 1.5/0.7 bar AD valve 2.0/0.9 bar AD valve 3.0/1.5 bar AD15 AD20 AD30 VBN MIC SPRINKLERS 2019 V1.0 VIBRONETTM 81 VIBRONETTM Head only Catalog number : 64300 - (any of below 6 digits) MODEL 040 050 1 UNIT 001000 005000 25 UNIT/BAG 001010 005010 VibroNetTM VIBRONETTM Head + AD valve 20 Catalog number : 64300 - (any of below 6 digits) MODEL 040 050 1 UNIT 001070 25 UNIT/BAG 001080 005110 VIBRONETTM ASSEMBLY STANDS VibroNetTM , UD stand, Flow YYY, micro-tube length XXX , stabilizer, barb connector to lateral pipe , AD valve 20 Catalog number : 64300 - (any of below 6 digits) MODEL 15 CM 30 CM 60 CM 90 CM 040 001600 002400 003400 003700 050 005120 VibroNetTM , UD stand, Flow YYY , micro-tube length XXX , stabilizer , press-fit connector to lateral pipe , AD valve 20 Catalog number : 64300 - (any of below 6 digits) MODEL 040 050 15 CM 001700 30 CM 002500 60 CM 003500 90 CM VibroNetTM , UD stand, Flow YYY , micro-tube length XXX , stabilizer , barb connector to lateral pipe , AD valve 15 Catalog number : 64300 - (any of below 6 digits) MODEL 040 050 15 CM 001200 30 CM 002000 60 CM 003000 90 CM VibroNetTM , UD stand, Flow YYY , micro-tube length XXX , stabilizer , press-fit connector to lateral pipe , AD valve 15 Catalog number : 64300 - (any of below 6 digits) MODEL 040 050 15 CM 001300 30 CM 002100 60 CM 003100 90 CM Missing catalog numbers available upon request. Background color defines the code color of the respective pin. All assembly stands include 4*6.5 mm gray SSPE micro-tube. Other stand combinations can be ordered based on the attached flowchart which can help determine the desired product requirement. 82 VIBRONETTM SPRINKLERS 2019 V1.0 VIBRONETTM COMPONENTS VIBRONETTM BODY Catalog Number: 64320-003000 VIBRONETTM "O" RING Catalog Number: 63520-005700 VIBRONETTM NOZZLE MECHANISM 040 Blue + Gray pin 050 Green + Gray pin 64320-004300 64320-004400 SPRINKLERS 2019 V1.0 VIBRONETTM 83 COOLNETTM PRO SUPER-FINE MISTER APPLICATIONS Super-fine static mister especially designed for cooling and humidifying greenhouses and livestock, and for irrigating over rooting tables. SPECIFICATIONS Bridgeless design. Static mister, 3 different flow rates: 5.5, 7.5, 14.0 l/h and a plugged nozzle. Nominal flow rates at 4.0 bar pressure. Pressure range 3.0 - 5.0 bar. Recommended filtration : 130 micron / 120 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter. When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to NetafimTM expert team's instructions. Inlet connector: Press fit 3 different configurations: Cross, 4 nozzles "T" , 2 nozzles Straight, 1 nozzle The nozzles are code color colored: 5.5 l/h Light Green 7.5 l/h Silver Gray 14.0 l/h Sky Blue Plugged nozzle: Orange FEATURES AND BENEFITS Bridgeless design eliminates dripping. Interchangeable components. Acid resistant (AA) raw materials, thus allowing the application chemicals to pass through the system. The system can be cleaned by application of suitable acid treatments. Micro sized droplets, at a relatively low pressure of 4.0 bar the CoolNetTM Pro uniformly distributes an average drop size of 65 micron. Specially designed for cooling, humidifying and rooting tables. Strongly recommended to connect the CoolNetTM Pro to the distribution pipe with a SSPE (super soft PE) micro-tube, a specifically designed stabilizer and AD valve (anti-drain) that will prevent distribution pipe drainage. 84 COOLNETTM PRO SPRINKLERS 2019 V1.0 COOLNETTM PRO TECHNICAL DATA MODEL NOZZLE CODE COLOR 055 Light Green 075 Silver Gray 140 Sky Blue NOZZLE SIZE (MM) 0.51 0.61 0.88 RECOMMENDED WORKING PRESSURE (BAR) 4.0 to 5.0 4.0 to 5.0 4.0 to 5.0 CONSTANT K 1.03 1.40 2.66 EXPONENT X 0.45 0.45 0.45 PACKAGING DATA COOLNETTM PRO Head , cross unit with male conn Complete stand (30 cm) w/stabilizer & AD valve Complete stand (60 cm) w/stabilizer & AD valve Head , T unit with male conn Complete stand (30 cm) w/stabilizer & AD valve Complete stand (60 cm) w/stabilizer & AD valve Head , one outlet QUANTITY P/BOX UNITS 750 125 100 1000 150 100 5000 BOX SIZE (CM X CM X CM) 18 x 34 x 79 28 x 28 x 57 18 x 34 x 79 28 x 28 x 57 28 x 28 x 57 18 x 34 x 79 18 x 34 x 79 BOX WEIGHT (KG) 11.0 8.4 8.2 14.8 9.9 8.2 21.5 BOXES P/PALLET 20 32 20 32 32 20 20 TOTAL UNITS P/PALLET 15000 4000 2000 32000 4800 2000 100000 PALLET WEIGHT (KG) 220 269 185 474 317 173 430 COOLNETTM PRO Flowchart to determine the desired product definition How to use: To determine the desired product definition select one of every set of options displayed on the chart. EMITTER CoolNetTM Pro CoolPro NOZZLE'S NUMBER One straight "S" Two on a "T" "T" Four on a cross "C" HEAD INLET CONNECTOR Press fit male MIC COOLPRO MIC FLOW 5.5 l/h 055 7.5 l/h 075 14.0 l/h 140 STAND ASSEMBLY Head only HEAD ONLY Head + 15 cm microtube + Stabilizer Head + 30 cm microtube + Stabilizer Head + 60 cm microtube + Stabilizer Head + 90 cm microtube + Stabilizer Head + XXX cm microtube + Stabilizer 15CM W/STB 30CM W/STB 60CM W/STB 90CM W/STB XXXCM W/STB *When selecting an undefined tube length, add the desired length in writing. ** standard supplied micro-tube : 4*6.5 SSPE colored light gray CONNECTOR TO LATERAL Barb BC Press fit PFC 3/8" conic 3/8C press fit M11 press fit M11C ACCESSORIES AD valve 2.0/0.9 bar AD valve 3.0/1.5 bar AD valve 4.0/1.8 bar AD20 AD30 AD40 SPRINKLERS 2019 V1.0 COOLNETTM PRO 85 COOLNETTM PRO Head only (with male inlet connector) Catalog number: 63100 - (any of below 6 digits ) MODEL 055 075 140 SINGLE "S" 048600 054000 055900 TEE "T" 050000 056300 055950 CROSS "C" 052000 058300 055980 COOLNETTM PRO head + AD valve 40 Catalog number: 63100 - (any of below 6 digits ) MODEL 055 075 140 SINGLE "S" 049420 056330 TEE "T" 050010 059420 CROSS "C" 052200 058500 055985 CoolNetTM Pro Single CoolNetTM Pro Tee CoolNetTM Pro Cross COOLNETTM PRO ASSEMBLY STANDS CoolNetTM Pro , UD stand, model "S" , Flow YYY , micro-tube length XXX , stabilizer , barb connector to lateral pipe , AD valve 40 , Catalog number : 63100 - (any of below 6 digits) MODEL 15 CM 30 CM 60 CM 90 CM 055 049000 049400 075 054300 055100 140 CoolNetTM Pro , UD stand, model "S" , Flow YYY , micro-tube length XXX , stabilizer , press-fit connector to lateral pipe , AD valve 40 , Catalog number : 63100 - (any of below 6 digits) MODEL 15 CM 30 CM 60 CM 90 CM 055 075 054600 055800 140 CoolNetTM Pro , UD stand, model "T" , Flow YYY , micro-tube length XXX , stabilizer , barb connector to lateral pipe , AD valve 40 , Catalog number : 63100 - (any of below 6 digits) MODEL 055 075 140 15 CM 050300 056700 30 CM 050700 057100 60 CM 90 CM CoolNetTM Pro , UD stand, model "T" , Flow YYY , micro-tube length XXX , stabilizer , press-fit connector to lateral pipe , AD valve 40 , Catalog number : 63100 - (any of below 6 digits) MODEL 055 075 140 15 CM 30 CM 050900 057300 60 CM 051100 90 CM 86 COOLNETTM PRO SPRINKLERS 2019 V1.0 CoolNetTM Pro , UD stand, model "C" , Flow YYY , micro-tube length XXX , stabilizer , barb connector to lateral pipe, AD valve 40 , Catalog number : 63100 - (any of below 6 digits) MODEL 055 075 15 CM 052400 058900 30 CM 053100 059600 60 CM 053960 069960 90 CM 053980 140 CoolNet TMPro , UD stand, model "C" , Flow YYY , micro-tube length XXX , stabilizer , press-fit connector to lateral pipe , AD valve 40 , Catalog number : 63100 - (any of below 6 digits) MODEL 055 075 15 CM 052700 059200 30 CM 053500 060000 60 CM 053965 070200 90 CM 140 055990 055991 071010 Missing catalog numbers available upon request. All assembly stands include 4*6.5 mm gray SSPE micro-tube. Other stand combinations can be ordered based on the attached flowchart which can help determine the desired product requirement. SPRINKLERS 2019 V1.0 COOLNETTM PRO 87 MISTNETTM APPLICATIONS Fine static mister especially designed for under canopy cooling and humidifying greenhouses. SPECIFICATIONS Bridgeless design eliminates dripping. Static mister, 2 flow rates: 15, 25 l/h. Nominal flow rates at 2.7 bar pressure. Pressure range 2.5 to 5.0 bar. Recommended filtration : 130 micron / 120 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter. When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to NetafimTM expert team's instructions. Inlet connectors: Press fit the nozzles are code color colored: 15.0 l/h Yellow 25.0 l/h Brown FEATURES AND BENEFITS Bridgeless design eliminates dripping. Interchangeable components. Acid resistant (AA) raw materials, thus allowing the application chemicals to pass through the system. The system can be cleaned by application of suitable acid treatments. Micro sized droplets, at a relatively low pressure of 3.0 bar the MistNetTM uniformly distributes an average drop size of 150 micron. Specially designed for under canopy cooling and humidifying systems. 88 MISTN ETTM SPRINKLERS 2019 V1.0 MISTNETTM TECHNICAL DATA MODEL NOZZLE CODE COLOR 015 Yellow 025 Brown NOZZLE SIZE DIA. (MM) 1.10 1.30 CONSTANT K 3.30 5.40 PACKAGING DATA MISTNETTM Head only Complete stand, 60 cm tube w/stake Complete stand, 60 cm tube w/o stake Complete stand, 90 cm tube w/stake Complete stand, 90 cm tube w/o stake QUANTITY P/BOX UNITS 4500 BOX SIZE (CM X CM X CM) 18 x 34 x 79 100 18 x 34 x 79 300 18 x 34 x 79 150 28 x 27 x 113 300 28 x 27 x 113 BOX WEIGHT (KG) 19.5 7.3 15.8 6.8 13.8 EXPONENT X 0.46 0.46 BOXES P/PALLET 20 20 20 16 16 RECOMMENDED WORKING PRESSURE (BAR) 3.0 3.0 TOTAL UNITS P/PALLET 90000 2000 6000 2400 4800 PALLET WEIGHT (KG) 390 159 329 193 221 MISTNETTM Flowchart to determine the desired product definition How to use: To determine the desired product definition select one of every set of options displayed on the chart. EMITTER MistNetTM MistNet HEAD INLET CONNECTOR Press fit male MIC FLOW 15 l/h 015 25 l/h 025 STAND ASSEMBLY Head only HEAD ONLY Head + 60 cm 60CM microtube + Stake W/STK Head + 60 cm microtube 60CM W/OSTK Head + 90 cm 90CM microtube + Stake W/STK Head + 90 cm microtube 90CM W/OSTK Head + XXX cm STL microtube + Stake W/STK Head + XXX cm microtube STL W/OSTK *When selecting an undefined tube length, add the desired length in writing. CONNECTOR TO LATERAL Barb BC Press fit PFC 3/8" conic press fit 3/8C ACCESSORIES AD valve 1.5/0.7 bar AD valve 2.0/0.9 bar AD valve 3.0/1.5 bar AD15 AD20 AD30 MISTNET MIC MISTNETTM Head only (with male inlet connector) Catalog number: 63100 - (any of below 6 digits ) MODEL 015 025 SINGLE "S" 040100 040000 SINGLE "S" 100units/bag 040120 040020 MistNetTM Missing catalog numbers available upon request Other stand combinations can be ordered based on the attached flowchart which can help determine the desired product requirement SPRINKLERS 2019 V1.0 MISTN ETTM 89 COOLNETTM PRO AND MISTNETTM COMPONENTS COOLNETTM PRO CROSS BODY COOLNETTM PRO "T" BODY 63120-001700 COOLNETTM PRO NOZZLE 63120-001500 COOLNETTM PRO PLUGGED NOZZLE COOLNETTM PRO AND MISTNETTM "S" BODY 63120-001600 MISTNETTM NOZZLE 5.5 Light Green: 63120-003000 7.5 Silver Gray: 63120-003200 14.0 Sky Blue: 63120-003300 COOLNETTM PRO AND MISTNETTM "O" RING 63120-001050 Plugged nozzle, Orange: 63120-001850 COOLNETTM PRO AND MISTNETTM DIFFUSER 63120-001800 15.0 Yellow: 63120-004000 25.0 Brown: 63120-002500 MALE/MALE CONNECTOR , COLORED LIGHT GRAY 63000-001450 90 MISTN ETTM SPRINKLERS 2019 V1.0 MICRO-SPRINKLERS AND MICRO-EMITTERS UPSIDE-DOWN STANDS COMPLEMENTARY ACCESSORIES AD VALVE , MALE/FEMALE Blue pin 1.5 bar/0.7 bar 63000-002980 Purple pin 2.0 bar/0.9 bar 63000-003000 Green pin 3.0 bar/1.5 bar 63000-003100 Orange pin 4.0 bar/1.8 bar 63000-003200 AD VALVE , BARB/BARB Blue pin 1.5 bar/0.7 bar 63000-003303 Purple pin 2.0 bar/0.9 bar 63000-003305 Green pin 3.0 bar/1.5 bar 63000-003310 Orange pin 4.0 bar/1.8 bar 63000-003315 AD VALVE , 3/8" CONIC THREADED/BARB Blue pin 1.5 bar/0.7 bar 63000-003250 Purple pin 2.0 bar/0.9 bar 63000-003230 Green pin 3.0 bar/1.5 bar 63000-003270 Orange pin 4.0 bar/1.8 bar 63000-003290 AD VALVE , 3/8" CONIC THREADED/BARB + ASSEMBLY FINGER FILTER Blue pin 1.5 bar/0.7 bar 63000-003260 Purple pin 2.0 bar/0.9 bar 63000-003240 Green pin 3.0 bar/1.5 bar 63000-003280 Orange pin 4.0 bar/1.8 bar 63000-003295 FINGER FILTER STABILIZER 63000-002910 BARB/FEMALE CONNECTOR (GRAY) 63000-001950 BARB/MALE CONNECTOR (GRAY) 63000-002060 BARB/BARB CONNECTOR (GRAY) 63000-001350 MALE/MALE CONNECTOR (GRAY) 63000-001450 3/8" CONIC THREADED/ FEMALE CONNECTOR (GRAY) 63000-002120 3/8" CONIC THREADED/ FEMALE CONNECTOR (GRAY) + ASSEMBLY FINGER FILTER M11 THREADED/FEMALE CONNECTOR (GRAY) + ASSEMBLY FINGER FILTER 63000-002180 PLUG (BLUE) 63000-002400 BARBED PRESSURE MEASURING POINT 63000-002800 1/4" UNF MALE THREADED, PRESSURE MEASURING POINT. ON A PVC PIPE, DRILL: 5.2 MM SCREW-TAP: 1/4-28 UNF 63000-002700 1/8" BSP MALE THREADED, PRESSURE MEASURING POINT. ON A PVC PIPE, DRILL: 8.5 MM SCREW-TAP: 1/8-28 BSP 63000-002750 SCREEN FILTER CONNECTOR 63000-003400 "T" FEMALE/FEMALE/ FEMALE (GRAY) 63000-000910 MALE/MALE ADAPTER TO "DAN" STANDS (BLUE) 63000-001060 63000-002140 63000-002600 BARB/FLAT FEMALE CONNECTOR M11 THREADED/FEMALE CONNECTOR (GRAY) FEMALE/FEMALE ADAPTER TO "DAN" STANDS (BLUE) 63000-002450 63000-002170 63000-002510 SPRINKLERS 2019 V1.0 MISTN ETTM 91 GYRONETTM TURBO APPLICATIONS Closed and open-air nurseries. Intensive field crops. Overhead cooling. Roof and tunnel cooling and dust cleaning. BENEFITS AND FEATURES Higher and better yields The GyroNetTM Turbo has a unique design of the sprinkler>s rotor water channel, and a special shape of the bridge, that provides very high water distribution uniformity Saves labor cost and multiple expenses on maintenance Higher reliability The GyroNetTM Turbo is made of a superior raw material composition resistant the chemicals, fertilizers, and sun exposure. Guarantees lower maintenance and repair cost. The GyroNetTM Turbo has anti-insect mechanism that is opened only during irrigation, and protects the nozzle. SPECIFICATIONS Very robust micro-sprinkler. Micro-sprinkler, 5 different flow rates: 200, 250, 300, 400, 500 l/h. Nominal flow rates at 2.2 bar pressure. Maximum recommended working pressure: 3.0 bar. Recommended filtration : 200 micron / 80 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter. When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to NetafimTM expert team's instructions. Inlet connector: 1/2" threaded male The rotor is colored Purple. 92 GYRONETTM TURBO SPRINKLERS 2019 V1.0 PERFORMANCE TABLE NOZZLE SIZE CODE COLOR (MM) WORKING PRESSURE (BAR) 2.0 1.89 Yellow 2.5 3.0 2.0 2.14 Purple 2.5 3.0 2.0 2.31 Green 2.5 3.0 2.0 2.67 Blue 2.5 3.0 2.0 3.00 Brown 2.5 3.0 * at least 0.5 mm/h **Performance table prepared under laboratory conditions, sprinkler head 1.0 meter above ground FLOW RATE (L/H) 190 213 233 244 273 299 287 321 351 388 434 475 485 543 594 WETTED DIAMETER* (M) 9.5 10.0 10.0 10.0 10.0 10.0 10.0 11.0 11.0 12.0 12.0 12.0 12.0 12.5 12.5 4 x 6 8.0 9.0 9.8 10.3 11.5 12.5 12.0 13.5 14.8 16.5 18.5 20.3 20.3 22.8 24.8 PRECIPITATION (MM/H) SPACING (M X M) 5 x 6 6 x 6 7 x 6 6.4 5.3 4.6 7.2 6.0 5.1 7.8 6.5 5.6 8.2 6.8 5.9 9.2 7.7 6.6 10.0 8.3 7.1 9.6 8.0 6.9 10.8 9.0 7.7 11.8 9.8 8.4 13.2 11.0 9.4 14.8 12.3 10.6 16.2 13.5 11.6 16.2 13.5 11.6 18.2 15.2 13.0 19.8 16.5 14.1 CU = or > than 92% CU = or > 88% and < 92% CU = or > 86% and < 88% 7 x 7 3.9 4.4 4.8 5.0 5.6 6.1 5.9 6.6 7.2 8.1 9.1 9.9 9.9 11.1 12.1 CU < 86% GYRONETTM TURBO CATALOG NUMBERS Head only Catalog number: 64100 - (any of below 6 digits ) MODEL 200 250 300 400 500 1 UNIT 002040 003050 004040 004940 006000 25 UNITS/BAG 002010 004050 *Missing catalog numbers available upon request 100 UNITS/BAG 002070 003080 004070 GYRONETTM TURBO COMPONENTS GYRONETTM TURBO UPPER BEARING GYRONETTM TURBO BRIDGE SPRINKLER ILLUSTRATION GYRONETTM TURBO SWIVEL + ASSEMBLY SLEEVE 64120-001750 64120-002000 GYRONETTM TURBO nozzles Catalog number : 64120 - (any of below 6 digits) GYRONET TM TURBO BODY NOZZLE 64120-001575 200, Yellow 250, Purple 300, Green 400, Blue 500, Brown 001000 001100 001200 001280 001350 SPRINKLERS 2019 V1.0 GYRONETTM TURBO 93 PACKAGING DATA GYRONETTM TURBO Head only Complete stand (120 cm) w/o stake QUANTITY P/BOX UNITS 500 75 BOX SIZE (CM X CM X CM) 18 x 34 x 79 17 x 26 x 139 BOX WEIGHT (KG) 10.4 9.5 BOXES P/PALLET 20 15 TOTAL UNITS P/PALLET 10000 1125 PALLET WEIGHT (KG) 220 153 COMPLEMENTARY PRODUCTS PRODUCT DESCRIPTION CATALOG NUMBER CONNECTOR ILLUSTRATIONS SOCKET 1/2" F TH - 1/2" F TH 65080-004500 SPR ADAP 1" AND 3/4" FTH TO 1/2" FTH 60101-000501 SPRINKLER STANDS MEGA-RISER 1/2" 0.4 M LENGTH 1/2" MTH - 1/2" FTH MEGASUPPORTING ARM MEGA-BASE 64520-002490 IMP SPR STAND 9*12 120CM W/OSTK F&S PE 64520-002485 IMP SPR STAND 9*12 120CM W/OSTK F&S FLX 64520-002480 64520-004900 64520-004910 For additional information on sprinklers stands and assembly instructions please review GyroNetTM Turbo user manual FORK STAND 1.0 M COMPLETE FOR PE 60101-000400 FORK STAND 0.5 M COMPLETE FOR PE 60101-000401 *This can be installed with GyroNet Turbo up to 400 l/h 94 GYRONETTM TURBO SPRINKLERS 2019 V1.0 SPRINKLERS 2019 V1.0 GYRONETTM TURBO 95 GYRO GIG 2050 LOW WORKING PRESSURE SPRINKLER APPLICATIONS Vegetables and open field crops, open field nurseries, crop germination. BENEFITS AND FEATURES Achieves high yields & Saves operation costs The Gyro Gig 2050 sprinkler reduces operating costs and saves money thanks to its low working pressure ability. The Gyro Gig 2050 is designed to achieve good water distribution uniformity, despite the sprinkler's low operating pressure. Saves labor costs and multiple expenses on maintenance High robustness - The Gyro Gig 2050 special design makes the sprinkler more resistible thus ensuring high performance and durability. Extended product life - The Gyro Gig 2050 is made of UV-protected materials, and is durable under all climate conditions and nutrients injected in agricultural applications. Flexible installation - Can be installed on solid sets or on removable field stands. Easy to maintain. SPECIFICATIONS 3 different nominal flow rates: 300, 390, 500 l/h. Nominal flow rates at 1.5 bar pressure. Recommended working pressure: 1.0 to 2.0 bar (at the sprinkler head). Wherever sand exceeding 2 ppm exists in the water, Hydrocyclone shall be installed to protect the system. When sand / silt / clay solids exceed 100 ppm, pretreatment will be applied following NetafimTM expert team's instructions. Water trajectory: 20 degrees. Inlet connection: 1/2" male threaded. Color coded nozzles for easy identification. 96 GYRO GIG 2050 SPRINKLERS 2019 V1.0 PERFORMANCE TABLE NOZZLE SIZE (MM) CODE COLOR WORKING PRESSURE (BAR) 1.0 2.5 Purple 1.5 2.0 1.0 2.8 Brown 1.5 2.0 1.0 3.1 Green 1.5 2.0 * at least 0.5 mm/h **Performance table prepared under laboratory conditions, sprinkler head 1.0 meter above ground FLOW RATE (L/H) 245 300 346 318 390 450 408 500 577 WETTED DIAMETER* (M) 10 12 12 11 12 12 11 12 12 5 x 5 9.8 12.0 13.8 12.7 15.6 18.0 16.3 20.0 23.1 5 x 6 8.2 10.0 11.5 10.6 13.0 15.0 13.6 16.7 19.2 PRECIPITATION (MM/H) SPACING (M X M) 5 x 7 6 x 6 7.0 6.8 8.6 8.3 9.9 9.6 9.1 8.8 11.1 10.8 12.9 12.5 11.7 11.3 14.3 13.9 16.5 16.0 6 x 7 5.8 7.1 8.2 7.6 9.3 10.7 9.7 11.9 13.7 7 x 7 5.0 6.1 7.1 6.5 8.0 9.2 8.3 10.2 11.8 CU = or > than 92% CU = or > 88% and < 92% CU = or > 86% and < 88% CU < 86% PACKAGING DATA MODEL Gyro Gig 2050 QUANTITY P/BOX UNIT 1000 BOX SIZE (CM X CM X CM) 55 x 36 x 33 BOX WEIGTH (KG) 16.9 BOXES P/PALLET 18 TOTAL UNITS P/PALLET 18000 PALLET WEIGTH (KG) 324 GYRO GIG 2050 CATALOG NUMBERS NOZZLE SIZE (MM) CODE COLOR FLOW RATE (L/H) * 2.5 Purple 300 2.8 Brown 390 3.1 Green 500 *Nominal flow rate at 1.5 bar working pressure CATALOG NUMBER 60120-000100 60120-000101 60120-000102 GYRO GIG 2050 SPRINKLER NOZZLES NOZZLE SIZE (MM) CODE COLOR CATALOG NUMBER PRODUCT DRAW 2.5 Purple 60120-000300 SPRINKLER ILLUSTRATION 2.8 Brown 60120-000301 3.1 Green 60120-000302 SPRINKLERS 2019 V1.0 GYRO GIG 2050 97 COMPLEMENTARY PRODUCTS PRODUCT DESCRIPTION CATALOG NUMBER CONNECTOR ILLUSTRATIONS SOCKET 1/2" F TH - 1/2" F TH 65080-004500 SPR ADAP 1" AND 3/4" FTH TO 1/2" FTH 60101-000501 SPRINKLER STANDS MEGA-RISER 1/2" 0.4 M LENGTH 1/2" MTH - 1/2" FTH MEGASUPPORTING ARM 64520-002490 IMP SPR STAND 9*12 120CM W/OSTK F&S PE 64520-002485 IMP SPR STAND 9*12 120CM W/OSTK F&S FLX 64520-004900 FORK STAND 1.0 M COMPLETE FOR PE 60101-000400 FORK STAND 0.5 M COMPLETE FOR PE 60101-000401 64520-004910 MEGA-BASE 64520-002480 98 GYRO GIG 2050 SPRINKLERS 2019 V1.0 SPRINKLERS 2019 V1.0 99 MEGANETTM 15D 15 DEGREES ROTATING IMPACT SPRINKLER APPLICATIONS For under tree irrigation and shade/net houses. For vegetables and open field crops, open field nurseries, crops germination, frost mitigation, cooling fruit orchards and roof dust cleaning. BENEFITS AND FEATURES Ensures high and uniform yield The MegaNetTM has symmetric structure that allows the water split to two equal water jets, that contribute to a balanced sprinkler, providing very high water distribution uniformity. Increased germination percentage Thanks to the gentle water jet, and relatively small drops near the ground, the MegaNetTM does not groove the soil along the whole irrigation event (including startup and shut off), which prevents from the seed to be exposed out of the soil. Reduced maintenance cost The MegaNetTM has a popup mechanism and it opened only during irrigation, this mechanism protects the nozzle and protect the sprinkler>s moving parts, by preventing insects and dirt particles to get inside the sprinkler. Each MegaNetTM sprinkler has an integral filter that ensures clean water inside the nozzle. In addition, this filter can be easily cleaned if needed. Extended product life achieved by superior raw material composition resistant the chemicals, fertilizers, and sun exposure. SPECIFICATIONS 7 different nominal flow rates: 200, 250, 350, 450, 550, 650, 750 l/h. Nominal flow rates at 2.3 bar pressure. Recommended working pressure: 2.0 to 3.0 bar (at the sprinkler head). Recommended filtration: 400 micron / 40 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter. When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to NetafimTM expert team's instructions. Can be installed on solid sets or in removable field stands. Made of UV-protected materials, durable to all climate conditions and nutrients injected in agricultural applications. Water trajectory: 15 degrees Inlet connector: 1/2" Threaded inlet connector 20 MM ISO inlet connector (to be glued to PVC) 1/2" ASTM inlet connector (to be glued to PVC) Code colored locking pins and caps for easy identification. 2 balanced water jets. Individual filter in each sprinkler. MegaNetTM sprinklers meet ISO 8026 standards (SI 1406) with production certified by the Israel Standards Institute (SII). 100 MEGANETTM 15D SPRINKLERS 2019 V1.0 PERFORMANCE TABLE NOZZLE SIZE (MM) 1.85 2.06 2.44 2.79 3.08 3.37 3.68 CODE COLOR Yellow Purple Green Blue Brown Orange Red WORKING PRESSURE (BAR) 2.5 3.0 2.5 3.0 2.5 3.0 2.5 3.0 2.5 3.0 2.5 3.0 2.5 3.0 FLOW RATE (L/H) 210 230 258 283 362 396 461 505 553 605 678 743 785 860 WETTED DIAMETER* (M) 14.0 14.0 14.0 14.0 14.0 14.0 16.0 16.0 16.0 16.0 16.0 16.0 17.0 17.0 7 X 8 3.8 4.1 4.6 5.1 6.5 7.1 8.2 9.0 9.9 10.8 12.1 13.3 14.0 15.4 8 X 8 3.3 3.6 4.0 4.4 5.7 6.2 7.2 7.9 8.6 9.5 10.6 11.6 12.3 13.4 PRECIPITATION (MM/H) SPACING (M X M) 8 X 10 9 X 9 10 X 10 2.6 2.6 2.1 2.9 2.8 2.3 3.2 3.2 2.6 3.5 3.5 2.8 4.5 4.5 3.6 5.0 4.9 4.0 5.8 5.7 4.6 6.3 6.2 5.1 6.9 6.8 5.5 7.6 7.5 6.1 8.5 8.4 6.8 9.3 9.2 7.4 9.8 9.7 7.9 10.8 10.6 8.6 10 X 11 1.9 2.1 2.3 2.6 3.3 3.6 4.2 4.6 5.0 5.5 6.2 6.8 7.1 7.8 10 X 12 1.8 1.9 2.2 2.4 3.0 3.3 3.8 4.2 4.6 5.0 5.7 6.2 6.5 7.2 * at least 0.5 mm/h **Performance table prepared under laboratory conditions, sprinkler head 0.5 meter above ground CU = or > than 92% CU = or > 88% and < 92% CU = or > 86% and < 88% CU < 86% PACKAGING DATA MEGANETTM Head only QUANTITY P/BOX UNITS 200 BOX SIZE (CM X CM X CM) 18 x 34 x 79 BOX WEIGHT (KG) 11.0 BOXES P/PALLET 20 TOTAL UNITS P/PALLET 4000 PALLET WEIGHT (KG) 232 MEGANETTM 15D Head only Catalog number : 63600 - (any of below 6 digits) 1/2" THREADED INLET CONNECTOR 20 MM ISO INLET CONNECTOR MODEL 1/2" ASTM INLET CONNECTOR 1/2" THREADED INLET CONNECTOR + AD 200 004900 250 004950 350 005000 450 006000 550 007000 650 008000 750 009000 Missing catalog numbers available upon request 010100 010200 MEGANETTM 15D COMPONENTS Catalog number : 63620 - (any of below 6 digits) MODEL CATALOG NUMBER SPRINKLER ILLUSTRATION 200 007400 250 007450 350 007500 450 007600 550 007700 650 007800 750 007620 010500 010600 005010 006010 MODEL 200 250 350 450 550 650 750 CATALOG NUMBER SPRINKLER ILLUSTRATION 008900 008950 009000 009100 009200 009300 009400 SPRINKLERS 2019 V1.0 MEGANETTM 15D 101 MEGANETTM 15D COMPONENTS MEGANETTM 1/2" THREADED INLET BODY MEGANETTM C20MM ISO GLUED INLET BODY 63620-004200 MEGANETTM FILTER 63620-004190 MEGANETTM SERVICE KEY 63620-004400 63620-004500 MEGANETTM COLORED CAP SAP DESCRIPTION CATALOG NUMBER 200 MGN CAP YELLOW 200 50/BAG 63620-004860 250 MGN CAP PURPLE 250 50/BAG 63620-004910 350 MGN CAP GREEN 350 50/BAG 63620-005010 450 MGN CAP BLUE 450 50/BAG 63620-005110 550 MGN CAP BROWN 550 50/BAG 63620-005210 650 MGN CAP ORANGE 650 50/BAG 63620-005310 750 MGN CAP RED 750 50/BAG 63620-005410 COMPLEMENTARY PRODUCTS PRODUCT DESCRIPTION CATALOG NUMBER CONNECTOR ILLUSTRATIONS SOCKET 1/2" F TH - 1/2" F TH 65080-004500 SPR ADAP 1" AND 3/4" FTH TO 1/2" FTH 60101-000501 SPRINKLER STANDS MEGA-RISER 1/2" 0.4 M LENGTH 1/2" MTH - 1/2" FTH MEGASUPPORTING ARM 64520-002490 IMP SPR STAND 9*12 120CM W/OSTK F&S PE 64520-004900 64520-002485 IMP SPR STAND 9*12 120CM W/OSTK F&S FLX 64520-004910 For additional information on sprinklers stands and assembly instructions please review MegaNetTM user manual MEGANETTM C1/2" ASTM GLUED INLET BODY 63620-004150 MEGANETTM ROAD GUARD 63620-007000 MEGANETTM TURBINE MGN TURBINE B GREY TURBINE 50/BAG 50 units/bag 63620-002110 MEGANETTM LOCKING PIN TURBINE MGN LOCKING PIN GREY B 50/BAG 50 units/bag 63620-001610 MEGA-BASE 64520-002480 FORK STAND 1.0 M COMPLETE FOR PE 60101-000400 FORK STAND 0.5 M COMPLETE FOR PE 60101-000401 102 MEGANETTM 15D SPRINKLERS 2019 V1.0 SPRINKLERS 2019 V1.0 MEGANETTM 15D 103 MEGANETTM 24D 24 DEGREES ROTATING IMPACT SPRINKLER APPLICATIONS For vegetables and open field crops, open field nurseries, crops germination, frost mitigation, cooling fruit orchards and roof dust cleaning. BENEFITS AND FEATURES Ensures high and uniform yield The MegaNetTM has symmetric structure that allows the water split to two equal water jets, that contribute to a balanced sprinkler, providing very high water distribution uniformity. Increased germination percentage Thanks to the gentle water jet, and relatively small drops near the ground, the MegaNetTM does not groove the soil along the whole irrigation event (including startup and shut off), which prevents from the seed to be exposed out of the soil. Reduced maintenance cost The MegaNetTM has a popup mechanism and it opened only during irrigation, this mechanism protects the nozzle and protect the sprinkler's moving parts, by preventing insects and dirt particles to get inside the sprinkler. Each MegaNetTM sprinkler has an integral filter that ensures clean water inside the nozzle. In addition, this filter can be easily cleaned if needed. Extended product life achieved by superior raw material composition resistant the chemicals, fertilizers, and sun exposure. SPECIFICATIONS 7 different nominal flow rates: 200, 250, 350, 450, 550, 650, 750 l/h. Nominal flow rates at 2.3 bar pressure. Recommended working pressure: 2.0 to 3.0 bar (at the sprinkler head). Recommended filtration: 400 micron / 40 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter. When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to NetafimTM expert team's instructions. Can be installed on solid sets or in removable field stands. Made of UV-protected materials, durable to all climate conditions and nutrients injected in agricultural applications. Water trajectory: 24 degrees Inlet connector: 1/2" Threaded inlet connector 20 MM ISO inlet connector (to be glued to PVC) 1/2" ASTM inlet connector (to be glued to PVC) Code colored locking pins and caps for easy identification. 2 balanced water jets. Individual filter in each sprinkler. MegaNetTM sprinklers meet ISO 8026 standards (SI 1406) with production certified by the Israel Standards Institute (SII). 104 MEGANETTM 24D SPRINKLERS 2019 V1.0 PERFORMANCE TABLE NOZZLE SIZE (MM) 1.85 2.06 2.44 2.79 3.08 3.37 3.68 CODE COLOR Yellow Purple Green Blue Brown Orange Red WORKING PRESSURE (BAR) 2.5 3.0 2.5 3.0 2.5 3.0 2.5 3.0 2.5 3.0 2.5 3.0 2.5 3.0 FLOW RATE (L/H) 210 230 258 283 362 396 461 505 553 605 678 743 785 860 WETTED DIAMETER* (M) 11.0 11.0 12.0 12.0 14.0 14.0 17.0 17.0 18.0 18.0 18.0 18.0 18.0 19.0 7 X 8 3.6 3.8 4.4 4.8 5.9 6.5 8.1 8.7 10.0 10.1 11.5 12.3 13.4 15.0 8 X 8 3.3 3.6 4.0 4.4 5.6 6.2 7.2 7.9 8.6 9.5 10.6 11.6 12.3 13.4 PRECIPITATION (MM/H) SPACING (M X M) 8 X 10 9 X 9 10 X 10 10 X 11 10 X 12 4.5 4.4 3.6 5.0 4.9 4.0 5.8 5.7 4.6 4.2 3.9 6.3 6.2 5.0 4.6 4.2 6.9 7.2 5.5 5.0 4.6 7.6 7.5 6.1 5.5 5.1 8.5 8.4 6.8 6.2 5.7 9.3 9.2 7.4 6.8 6.2 9.8 9.7 7.9 7.1 6.6 10.7 10.6 8.6 7.8 7.2 * at least 0.5 mm/h **Performance table prepared under laboratory conditions, sprinkler head 1.0 meter above ground CU = or > than 92% CU = or > 88% and < 92% CU = or > 86% and < 88% CU < 86% PACKAGING DATA MEGANETTM Head only QUANTITY P/BOX UNITS 200 BOX SIZE (CM X CM X CM) 18 x 34 x 79 BOX WEIGHT (KG) 11.0 BOXES P/PALLET 20 TOTAL UNITS P/PALLET 4000 PALLET WEIGHT (KG) 232 MEGANETTM 24D Head only Catalog number : 63600 - (any of below 6 digits) MODEL CATALOG NUMBER SPRINKLER ILLUSTRATION 200 001700 250 001750 350 001000 450 002000 550 003000 650 004000 750 004500 MEGANETTM 24D Components Catalog number : 63620 - (any of below 6 digits) MODEL CATALOG NUMBER SPRINKLER ILLUSTRATION 200 008100 250 008150 350 008200 450 008300 550 008400 650 008500 750 008600 MEGANETTM 24D Head only Catalog number : 63600 - (any of below 6 digits) MODEL CATALOG NUMBER SPRINKLER ILLUSTRATION 200 001720 250 350 001900 450 002010 550 003010 650 004010 750 004510 Missing catalog numbers available upon request MEGANETTM 24D Components Catalog number : 63620 - (any of below 6 digits) MODEL CATALOG NUMBER SPRINKLER ILLUSTRATION 200 009700 250 009750 350 009800 450 009900 550 010000 650 010100 750 010200 SPRINKLERS 2019 V1.0 MEGANETTM 24D 105 MEGANETTM 24D COMPONENTS MEGANETTM 1/2" THREADED INLET BODY MEGANETTM FILTER 63620-004200 MEGANETTM SERVICE KEY 63620-004400 MEGANETTM ROAD GUARD 63620-004500 63620-007000 MEGANETTM COLORED CAP SAP DESCRIPTION CATALOG NUMBER 200 MGN CAP YELLOW 200 50/BAG 63620-004860 250 MGN CAP PURPLE 250 50/BAG 63620-004910 350 MGN CAP GREEN 350 50/BAG 63620-005010 450 MGN CAP BLUE 450 50/BAG 63620-005110 550 MGN CAP BROWN 550 50/BAG 63620-005210 650 MGN CAP ORANGE 650 50/BAG 63620-005310 750 MGN CAP RED 750 50/BAG 63620-005410 COMPLEMENTARY PRODUCTS PRODUCT DESCRIPTION CATALOG NUMBER CONNECTOR ILLUSTRATIONS SOCKET 1/2" F TH - 1/2" F TH 65080-004500 SPR ADAP 1" AND 3/4" FTH TO 1/2" FTH 60101-000501 SPRINKLER STANDS MEGA-RISER 1/2" 0.4 M LENGTH 1/2" MTH - 1/2" FTH MEGASUPPORTING ARM 64520-002490 IMP SPR STAND 9*12 120CM W/OSTK F&S PE 64520-002485 IMP SPR STAND 9*12 120CM W/OSTK F&S FLX 64520-004900 64520-004910 For additional information on sprinklers stands and assembly instructions please review MegaNetTM user manual MEGANETTM TURBINE CONNECTOR ILLUSTRATIONS MGN TURBINE A1 BLACK TURBINE 50/BAG 50 units/bag 63620-002010 MGN TURBINE B GREY TURBINE 50/BAG 50 units/bag 63620-002110 MEGANETTM LOCKING PIN TURBINE MGN LOCKING PIN BLACK A 50/BAG 50 units/bag 63620-001510 MEGA-BASE 64520-002480 FORK STAND 1.0 M COMPLETE FOR PE 60101-000400 FORK STAND 0.5 M COMPLETE FOR PE 60101-000401 106 MEGANETTM 24D SPRINKLERS 2019 V1.0 SPRINKLERS 2019 V1.0 MEGANETTM 24D 107 D-NETTM 8550 3D ARM IMPACT SPRINKLER APPLICATIONS For vegetables and open field crops, open field nurseries, crop germination, cooling fruit orchard. BENEFITS AND FEATURES Higher and better yields The D-NetTM 8550 provides outstanding water distribution uniformity, due to the unique 3-D arm enabling, the highest uniformity in the market, respective to its flow rate and installation spacing. The D-NetTM 8550 provides maximum water-use efficiency. Saves labor costs and multiple expenses on maintenance High robustness The D-NetTM 8550 has special design that makes the sprinkler more resistant and ensures high performance for a long product life. Extended product life The D-NetTM 8550 is made of UV-protected materials, making it durable under all climate conditions and with any applied nutrients. Flexible installation Can be installed on solid sets or on removable field stands. Easy to maintain A special nozzle key is designed to allow simple cleaning of the nozzle SPECIFICATIONS 7 different nominal flow rates: 510, 580, 680, 810, 940, 1135, 1275 l/h. Nominal flow rates at 2.5 bar pressure. Recommended working pressure: 2.0 to 3.0 bar (at the sprinkler head). Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed to protect the system. When sand/ silt/ clay solids exceed 100 ppm, pretreatment will be applied according to NetafimTM expert team's instructions. Water trajectory: 24 degrees Inlet connection: 1/2" male threaded. Color coded nozzles for easy identification. 108 D-NETTM 8550 SPRINKLERS 2019 V1.0 PERFORMANCE TABLE NOZZLE SIZE CODE COLOR (MM) 2.3 + 1.8 Gray + lime green 2.5 +1.8 Purple + lime green 2.9 + 1.8 Orange + lime green 3.2 + 1.8 Green + lime green 3.5 + 1.8 Blue + lime green WORKING PRESSURE (BAR) 1.5 2.0 2.5 3.0 1.5 2.0 2.5 3.0 1.5 2.0 2.5 3.0 1.5 2.0 2.5 3.0 1.5 2.0 2.5 3.0 FLOW RATE (L/H) 395 456 510 559 449 519 580 635 527 608 680 745 627 724 810 887 728 841 940 1030 WETTED DIAMETER* (M) 18 18 19 19 18 19 19 20 18 19 20 20 18 19 21 21 18 19 21 21 10 x 12 3.5 3.5 4.4 4.8 3.7 4.4 4.9 5.4 4.4 5.1 5.7 6.2 5.2 6.1 6.8 7.4 6.0 7.0 7.9 8.6 PRECIPITATION (MM/H) SPACING (M X M) 11 x 12 12 x 12 3.2 2.9 3.2 2.9 4.0 3.7 4.4 4.0 3.4 3.1 4.0 3.6 4.4 4.0 4.9 4.5 4.0 3.7 4.6 4.2 5.1 4.7 5.6 5.2 4.8 4.4 5.5 5.0 6.1 5.6 6.7 6.2 5.5 5.0 6.4 5.8 7.1 6.5 7.8 7.2 13 x 12 2.1 2.7 3.4 3.7 2.9 3.3 3.7 4.2 3.4 3.9 4.3 4.8 4.0 4.7 5.2 5.7 4.6 5.4 6.0 6.6 NOZZLE SIZE CODE COLOR (MM) 3.5 + 2.5 Blue + yellow 4.0 + 2.5 Black + Yellow WORKING PRESSURE (BAR) 2.0 2.5 3.0 2.0 2.5 3.0 * at least 0.5 mm/h **Performance table prepared under laboratory conditions, sprinkler head 1.0 meter above ground FLOW RATE (L/H) 1015 1135 1243 1145 1275 1397 WETTED DIAMETER* (M) 22 22 22 22 22 22 9 x 14 8.1 9.0 9.9 9.1 10.1 11.1 PRECIPITATION (MM/H) SPACING (M X M) 9 x 15 10 x 14 7.5 7.3 8.4 8.1 9.2 8.9 8.5 8.2 9.4 9.1 10.3 10.0 CU = or > than 92% CU = or > 88% and < 92% CU = or > 86% and < 88% 10 x 15 6.8 7.6 8.3 7.6 8.5 9.3 CU < 86% PACKAGING DATA MODEL D-NetTM 8550 QUANTITY P/BOX UNIT 168 BOX SIZE (CM X CM X CM) 54 x 36 x 33 BOX WEIGTH (KG) 12.0 BOXES P/PALLET 18 TOTAL UNITS P/PALLET 3024 PALLET WEIGTH (KG) 240 D-NETTM 8550 CATALOG NUMBERS NOZZLE SIZE (MM) CODE COLOR FLOW RATE (L/H) * 2.3 +1.8 Gray + lime green 510 2.5 +1.8 Purple + lime green 580 2.9 + 1.8 Orange + lime green 680 3.2 + 1.8 Green + lime green 810 3.5 + 1.8 Blue + lime green 940 3.5 + 2.5 Blue + Yellow 1135 4.0 + 2.5 Black + Yellow 1275 *Nominal flow rate at 2.5 bar working pressure CATALOG NUMBER 60100-000990 60100-001000 60100-001010 60100-001030 60100-001040 60100-001045 60100-001046 SPRINKLER ILLUSTRATION SPRINKLERS 2019 V1.0 D-NETTM 8550 109 D-NET 8550 SPRINKLER NOZZLES - ORDERS BY BOX ONLY NOZZLE SIZE (MM) CODE COLOR CATALOG NUMBER PER BOX* QUANTITY PER BOX Front nozzle 2.3 Grey 60101-000800 500 PRODUCT DRAW Front nozzle 2.5 Purple 60101-000801 500 Front nozzle 2.9 Orange 60101-000802 500 Front nozzle 3.2 Green 60101-000803 500 Front nozzle 3.5 Blue 60101-000804 500 Front nozzle 4.0 Black 60101-000805 500 Rear nozzle 1.8 Lime green 60101-000806 500 Rear nozzle 2.5 Yellow 60101-000807 *The catalog number is for full box of nozzles COMPLEMENTARY PRODUCTS PRODUCT DESCRIPTION CATALOG NUMBER CONNECTOR ILLUSTRATIONS SOCKET 1/2" F TH - 1/2" F TH 65080-004500 SPR ADAP 1" AND 3/4" FTH TO 1/2" FTH 60101-000501 500 PRODUCT DESCRIPTION CATALOG NUMBER D-NetTM 8550 CLIP NOZZLE TOOL 1 UNIT 60100-001410 50 UNITS/BOX 60100-001420 CONNECTOR ILLUSTRATIONS PRODUCT DESCRIPTION Anti-theft connector 20 mm (grey) -1000 units/box + 20 keys Anti-theft connector 20 mm (grey) - 100 units/bag Anti-theft connector ½" (white) - 1000 units/box + 20 keys Anti-theft connector ½" (white) - 100 units/bag Anti-theft key (blue) - 20 units/bag CATALOG NUMBER 60101-000210 60101-000200 60101-000110 60101-000100 60101-000300 CONNECTOR ILLUSTRATIONS 110 D-NETTM 8550 SPRINKLERS 2019 V1.0 SPRINKLER STANDS MEGA-RISER 1/2" 0.4 M LENGTH 1/2" MTH - 1/2" FTH MEGASUPPORTING ARM MEGA-BASE 64520-002490 IMP SPR STAND 9*12 120CM W/OSTK F&S PE 64520-002485 IMP SPR STAND 9*12 120CM W/OSTK F&S FLX 64520-002480 64520-004900 64520-004910 For additional information on sprinklers stands and assembly instructions please review D-NetTM 8550 user manual SPRINKLERS 2019 V1.0 D-NETTM 8550 111 D-NETTM 8550 AA 3D ARM IMPACT SPRINKLER WITH ADJUSTABLE ARC APPLICATIONS For open filed crops edge irrigation. BENEFITS AND FEATURES Road guard A simple adjustable arc enables to change the sprinkler from 360 degrees arc to any part circle. Higher and better yields The D-NetTM 8550 AA provides outstanding water distribution uniformity, due to the unique 3-D arm enabling, the highest uniformity in the market, respective to its flow rate and installation spacing. The D-NetTM 8550 AA provides maximum water-use efficiency Saves labor costs and multiple expenses on maintenance High robustness The D-NetTM 8550 AA has special design that makes the sprinkler more resistant and ensures high performance for a long product life. Extended product life The D-NetTM 8550 AA is made of UV-protected materials, making it durable under all climate conditions and with any applied nutrients. Flexible installation Can be installed on solid sets or on removable field stands. Easy to maintain A special nozzle key is designed to allow simple cleaning of the nozzle even under pressure. SPECIFICATIONS 2 different nominal flow rates: 500, 630 l/h. Nominal flow rates at 2.5 bar pressure. Recommended working pressure: 2.0 to 3.0 bar (at the sprinkler head). Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed to protect the system. When sand/ silt/ clay solids exceed 100 ppm, pretreatment will be applied according to NetafimTM expert team's instructions. Water trajectory: 24 degrees Inlet connection: ½" male threaded. Color coded nozzles for easy identification. 112 D-NETTM 8550 AA SPRINKLERS 2019 V1.0 D-NETTM 8550 AA - PERFORMANCE TABLE NOZZLE SIZE (MM) Front nozzle 2.9 CODE COLOR Orange Front nozzle 3.2 * At least 0.5 mm/h PACKAGING DATA Green WORKING PRESSURE (BAR) 2.0 2.5 3.0 2.0 2.5 3.0 FLOW RATE (L/H) 447 500 548 563 630 690 WETTED RADIUS* (M) 10.0 10.0 10.0 10.0 10.0 10.0 MODEL QUANTITY P/BOX UNIT D-NetTM 8550 AA 72 BOX SIZE (CM X CM X CM) 55 x 36 x 33 BOX WEIGTH (KG) 8.1 BOXES P/PALLET 18 TOTAL UNITS P/PALLET 1296 PALLET WEIGTH (KG) 160 D-NETTM 8550 AA CATALOG NUMBERS NOZZLE SIZE (MM) NOZZLE CODE COLOR FLOW RATE (L/H) * CATALOG NUMBER SPRINKLER ILLUSTRATION 2.9 Orange 500 60100-004350 3.2 Green 630 *Nominal flow rate at 2.5 bar working pressure D-NETTM 8550 AA SPRINKLER NOZZLES NOZZLE SIZE (MM) CODE COLOR Front nozzle 2.9 Orange Front nozzle 3.2 Green 60100-004351 CATALOG NUMBER 60100-001160 60100-001170 PRODUCT DRAW COMPLEMENTARY PRODUCTS PRODUCT DESCRIPTION CATALOG NUMBER CONNECTOR ILLUSTRATIONS Socket 1/2" F TH - 1/2" F TH 65080-004500 SPR Adap 1" and 3/4" FTH to 1/2" FTH 60101-000500 PRODUCT DESCRIPTION CATALOG NUMBER D-NetTM 8550 CLIP NOZZLE TOOL 1 UNIT 60100-001410 50 UNITS/BOX 60100-001420 CONNECTOR ILLUSTRATIONS SPRINKLERS 2019 V1.0 D-NETTM 8550 AA 113 D-NETTM 0950 3D ARM IMPACT SPRINKLER APPLICATIONS For under canopy irrigation, plantations, bananas and orchards requiring very low water trajectory angle. For windy open fields. BENEFITS AND FEATURES Higher and better yields The D-NetTM 0950 provides high water distribution uniformity due to the unique 3-D arm enabling the highest uniformity in the market, respective to its flow rate and installation spacing. The D-NetTM 0950 provides maximum water-use efficiency especially in high windy conditions.. Saves labor costs and multiple expenses on maintenance High robustness The D-NetTM 0950 has special design that makes the sprinkler more resistible and ensure high performance for a long product life. Extended product life The D-NetTM 0950 is made of UV-protected materials, making it durable under all climate conditions and with any applied nutrients. Flexible installation Can be installed on solid sets or on removable field stands. Easy to maintain A special nozzle design, allows simple cleaning of the nozzle even under pressure. SPECIFICATIONS 3 different nominal flow rates: 355, 400, 510 l/h. Nominal flow rates at 2.5 bar pressure. Recommended working pressure: 2.0 to 3.0 bar (at the sprinkler head). Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed to protect the system. When sand/ silt/ clay solids exceed 100 ppm, pretreatment will be applied according to NetafimTM expert team's instructions. Water trajectory: 9 degrees Inlet connection: 1/2" male threaded. Color coded nozzles for easy identification. 114 D-NETTM 0950 SPRINKLERS 2019 V1.0 PERFORMANCE TABLE NOZZLE SIZE CODE WORKING FLOW RATE WETTED COLOR PRESSURE DIAMETER* (MM) (BAR) (L/H) (M) 8X8 2.0 315 16 4.92 2.3 White 2.5 355 16 5.55 3.0 385 16 6.02 2.0 360 14 5.63 2.5 Brown 2.5 400 14 6.25 3.0 440 14 6.87 2.0 460 14 7.19 2.9 Yellow 2.5 510 16 7.97 3.0 555 16 8.67 PRECIPITATION (MM/H) SPACING (M X M) 8X9 9X9 9X10 4.38 3.89 3.50 4.93 4.39 3.95 5.35 4.76 4.28 5.00 4.44 4.00 5.56 4.94 4.45 6.11 5.43 4.89 6.39 5.68 5.11 7.08 6.30 5.67 7.71 6.85 6.17 * at least 0.5 mm/h ** Performance table prepared under laboratory conditions, sprinkler head at 0.5 meter above ground 10X10 3.15 3.55 3.85 3.60 4.00 4.40 4.60 5.10 5.55 10X11 2.86 3.23 3.50 3.27 3.64 4.00 4.18 4.64 5.05 PACKAGING DATA MODEL D-NetTM 0950 QUANTITY P/BOX UNIT 168 BOX SIZE (CM X CM X CM) 54 x 36 x 33 BOX WEIGTH (KG) 12.0 BOXES P/PALLET 18 TOTAL UNITS P/PALLET 3024 PALLET WEIGTH (KG) 240 D-NETTM 0950 CATALOG NUMBERS NOZZLE SIZE (MM) CODE COLOR 2.3 White FLOW RATE (L/H) * 355 CATALOG NUMBER 60100-001430 2.5 Brown 400 60100-001431 2.9 Yellow 510 *Nominal flow rate at 2.5 bar working pressure 60100-001432 D-NET 0950 SPRINKLER NOZZLES - ORDERS BY BOX ONLY NOZZLE SIZE (MM) CODE COLOR CATALOG NUMBER PER BOX* QUANTITY PER BOX 2.3 White 60101-000830 350 SPRINKLER ILLUSTRATION PRODUCT DRAW 2.5 Brown 60101-000831 350 2.9 Yellow 60101-000832 350 *The catalog number is for full box of nozzles SPRINKLERS 2019 V1.0 D-NETTM 0950 115 COMPLEMENTARY PRODUCTS PRODUCT DESCRIPTION CATALOG NUMBER CONNECTOR ILLUSTRATIONS SOCKET 1/2" F TH - 1/2" F TH 65080-004500 REDUCER COUPLING 3/4" F TH - 1/2" F TH 65080-004600 SPRINKLER STANDS MEGA-RISER 1/2" 0.4 M LENGTH 1/2" MTH - 1/2" FTH MEGASUPPORTING ARM MEGA-BASE 64520-002490 IMP SPR STAND 9*12 120CM W/OSTK F&S PE 64520-002485 IMP SPR STAND 9*12 120CM W/OSTK F&S FLX 64520-002480 64520-004900 64520-004910 For additional information on sprinklers stands and assembly instructions please review D-NetTM 0950 user manual 116 D-NETTM 0950 SPRINKLERS 2019 V1.0 SPRINKLERS 2019 V1.0 D-NETTM 0950 117 D-NETTM 6550 3D ARM IMPACT SPRINKLER APPLICATIONS For under canopy irrigation, plantations, bananas, orchards or any other full coverage needs. BENEFITS AND FEATURES Higher and better yields The D-NetTM 6550 provides high water distribution uniformity due to the unique 3-D arm enabling the highest uniformity in the market, respective to its flow rate and installation spacing. The D-NetTM 6550 provides maximum water-use efficiency. Saves labor costs and multiple expenses on maintenance High robustness The D-NetTM 6550 has special design that makes the sprinkler more resistible and ensure high performance for a long product life. Extended product life The D-NetTM 6550 is made of UV-protected materials, making it durable under all climate conditions and with any applied nutrients. Flexible installation Can be installed on solid sets or on removable field stands. Easy to maintain A special nozzle design, allows simple cleaning of the nozzle even under pressure. SPECIFICATIONS 3 different nominal flow rates: 355, 400, 510 l/h. Nominal flow rates at 2.5 bar pressure. Recommended working pressure: 2.0 to 3.0 bar (at the sprinkler head). Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed to protect the system. When sand/ silt/ clay solids exceed 100 ppm, pretreatment will be applied according to NetafimTM expert team's instructions. Water trajectory: 14 degrees Inlet connection: 1/2" male threaded. Color coded nozzles for easy identification. 118 D-NETTM 6550 SPRINKLERS 2019 V1.0 PERFORMANCE TABLE NOZZLE SIZE (MM) CODE COLOR 2.3 Gray 2.5 Purple 2.9 Orange WORKING PRESSURE (BAR) 2.0 2.5 3.0 2.0 2.5 3.0 2.0 2.5 3.0 FLOW RATE (L/H) 318 355 389 358 400 438 456 510 559 WETTED DIAMETER* (M) 16 17 17 16 18 18 17 18 19 9 X 9 3.9 4.4 4.8 4.4 4.9 5.4 5.6 6.3 6.9 9 X 10 3.5 3.9 4.3 4.0 4.4 4.9 5.1 5.7 6.2 PRECIPITATION (MM/H) SPACING (M X M) 10 X 10 10 X 11 3.2 2.9 3.6 3.2 3.9 3.5 3.6 3.3 4.0 3.6 4.4 4.0 4.6 4.1 5.1 4.6 5.6 5.1 * at least 0.5 mm/h ** Performance table prepared under laboratory conditions, sprinkler head at 0.5 meter above ground 10 X 12 2.7 3.0 3.2 3.0 3.3 3.7 3.8 4.3 4.7 12 X 12 2.2 2.5 2.7 2.5 2.8 3.0 3.2 3.5 3.9 PACKAGING DATA MODEL D-NetTM 6550 QUANTITY P/BOX UNIT 168 BOX SIZE (CM X CM X CM) 54 x 36 x 33 BOX WEIGTH (KG) 12.0 BOXES P/PALLET 18 TOTAL UNITS P/PALLET 3024 PALLET WEIGTH (KG) 240 D-NETTM 6550 CATALOG NUMBERS NOZZLE SIZE (MM) CODE COLOR 2.3 Gray FLOW RATE (L/H) * 355 CATALOG NUMBER 60100-002300 SPRINKLER ILLUSTRATION 2.5 Purple 400 60100-002310 2.9 Orange 510 *Nominal flow rate at 2.5 bar working pressure 60100-002320 D-NET 6550 SPRINKLER NOZZLESS - ORDERS BY BOX ONLY NOZZLE SIZE (MM) CODE COLOR CATALOG NUMBER PER BOX* QUANTITY PER BOX PRODUCT DRAW 2.3 Gray 60101-000826 350 2.5 Purple 60101-000827 350 2.9 Orange 60101-000828 350 *The catalog number is for full box of nozzles SPRINKLERS 2019 V1.0 D-NETTM 6550 119 COMPLEMENTARY PRODUCTS PRODUCT DESCRIPTION CATALOG NUMBER CONNECTOR ILLUSTRATIONS SOCKET 1/2" F TH 1/2" F TH 65080-004500 SPR ADAP 1" AND 3/4" FTH TO 1/2" FTH 60101-000501 PRODUCT DESCRIPTION Anti-theft connector 20 mm (grey) -1000 units/box + 20 keys Anti-theft connector 20 mm (grey) - 100 units/bag Anti-theft connector ½" (white) - 1000 units/box + 20 keys Anti-theft connector ½" (white) - 100 units/bag Anti-theft key (blue) - 20 units/bag SPRINKLER STANDS MEGA-RISER 1/2" 0.4 M LENGTH 1/2" MTH - 1/2" FTH MEGASUPPORTING ARM CATALOG NUMBER 60101-000210 60101-000200 60101-000110 60101-000100 60101-000300 CONNECTOR ILLUSTRATIONS MEGA-BASE 64520-002490 IMP SPR STAND 9*12 120CM W/OSTK F&S PE 64520-002485 IMP SPR STAND 9*12 120CM W/OSTK F&S FLX 64520-002480 64520-004900 64520-004910 For additional information on sprinklers stands and assembly instructions please review D-NetTM 6550 user manual 120 D-NETTM 6550 SPRINKLERS 2019 V1.0 SPRINKLERS 2019 V1.0 D-NETTM 6550 121 LWP 2450 LOW WORKING PRESSURE IMPACT SPRINKLER APPLICATIONS Vegetables and open field crops, open field nurseries, crop germination, cooling of fruit orchards. BENEFITS AND FEATURES Achieves high yields & Saves operation costs The LWP 2450 sprinkler reduces operating costs and saves money thanks to its ability to work at low pressure. The LWP 2450 is design to achieve a good water distribution uniformity, although the low sprinkler operation pressure. Saves labor costs and multiple expenses on maintenance High robustness - The LWP 2450 special design makes the sprinkler more resistible thus ensuring high performance and durability. Extended product life - The LWP 2450 is made of UV-protected materials, and is durable under all climate conditions and nutrients injected in agricultural applications. Flexible installation - Can be installed on solid sets or on removable field stands. Easy to maintain - A special nozzle key is designed to allow continuous cleaning of the nozzle even under pressure. SPECIFICATIONS 3 different nominal flow rates: 350, 380, 450 l/h. Nominal flow rates at 1.5 bar pressure. Recommended working pressure: 1.0 to 2.0 bar (at the sprinkler head). Wherever sand exceeding 2 ppm exists in the water, Hydrocyclone shall be installed to protect the system. When sand / silt / clay solids exceed 100 ppm, pretreatment will be applied following NetafimTM expert team's instructions. Water trajectory: 24 degrees Inlet connection: 1/2" male threaded. Color coded nozzles for easy identification. 122 LWP 2450 SPRINKLERS 2019 V1.0 PERFORMANCE TABLE NOZZLE SIZE CODE COLOR (MM) 2.0 + 1.8 White + lime green 2.2 +1.8 Brown + lime green 2.5 + 1.8 Purple + lime green WORKING PRESSURE (BAR) 1.0 1.5 2.0 1.0 1.5 2.0 1.0 1.5 2.0 FLOW RATE (L/H) 286 350 404 310 380 439 367 450 520 WETTED DIAMETER* (M) 17 20 21 18 20 21 19 21 22 8 X 8 4.5 5.5 6.3 4.8 5.9 6.9 6.4 7.0 9.0 PRECIPITATION (MM/H) SPACING (M X M) 8 X 10 9 X 9 9 X 10 3.6 3.5 3.2 4.4 4.3 3.9 5.1 5.0 4.5 3.9 3.8 3.4 4.8 4.7 4.2 5.5 5.4 4.9 5.1 5.0 4.5 5.6 5.6 5.0 7.2 7.1 6.4 10 X 10 2.9 3.5 4.0 3.1 3.8 4.4 4.1 4.5 5.8 * at least 0.5 mm/h **Performance table prepared under laboratory conditions, sprinkler head 1.0 meter above ground CU = or > than 92% CU = or > 88% and < 92% CU = or > 86% and < 88% CU < 86% PACKAGING DATA MODEL LWP 2450 QUANTITY P/BOX UNIT 200 BOX SIZE (CM X CM X CM) 54 x 22 x 48 BOX WEIGTH (KG) 13.0 BOXES P/PALLET 20 TOTAL UNITS P/PALLET 4000 PALLET WEIGTH (KG) 270 LWP 2450 CATALOG NUMBERS NOZZLE SIZE (MM) CODE COLOR 2.0 + 1.8 White + lime green FLOW RATE (L/H) * 350 CATALOG NUMBER 60100-004000 SPRINKLER ILLUSTRATION 2.2 + 1.8 Brown + lime green 380 60100-004001 2.5 + 1.8 Purple + lime green 450 *Nominal flow rate at 1.5 bar working pressure LWP 2450 SPRINKLER NOZZLES - ORDERS BY BOX ONLY NOZZLE SIZE (MM) CODE COLOR CATALOG NUMBER PER BOX* Front nozzle 2.0 White 60101-000833 60100-004002 QUANTITY PER BOX 500 Front nozzle 2.2 Brown 60101-000834 500 Front nozzle 2.5 Purple 60101-000801 500 Rear nozzle 1.8 Lime green 60101-000806 500 *The catalog number is for full box of nozzles PRODUCT DRAW SPRINKLERS 2019 V1.0 LWP 2450 123 COMPLEMENTARY PRODUCTS PRODUCT DESCRIPTION CATALOG NUMBER CONNECTOR ILLUSTRATIONS SOCKET 1/2" F TH - 1/2" F TH 65080-004500 SPR ADAP 1" AND 3/4" FTH TO 1/2" FTH 60101-000501 PRODUCT DESCRIPTION LWP 2450 CLIP NOZZLE TOOL CATALOG NUMBER 1 UNIT 60100-001410 50 UNITS/BOX 60100-001420 CONNECTOR ILLUSTRATIONS PRODUCT DESCRIPTION Anti-theft connector 20 mm (grey) -1000 units/box + 20 keys Anti-theft connector 20 mm (grey) - 100 units/bag Anti-theft connector ½" (white) - 1000 units/box + 20 keys Anti-theft connector ½" (white) - 100 units/bag Anti-theft key (blue) - 20 units/bag SPRINKLER STANDS MEGA-RISER 1/2" 0.4 M LENGTH 1/2" MTH - 1/2" FTH MEGASUPPORTING ARM CATALOG NUMBER 60101-000210 60101-000200 60101-000110 60101-000100 60101-000300 CONNECTOR ILLUSTRATIONS MEGA-BASE 64520-002490 IMP SPR STAND 9*12 120CM W/OSTK F&S PE 64520-002485 IMP SPR STAND 9*12 120CM W/OSTK F&S FLX 64520-002480 64520-004900 64520-004910 For additional information on sprinklers stands and assembly instructions please review LWP 2450 user manual 124 LWP 2450 SPRINKLERS 2019 V1.0 SPRINKLERS 2019 V1.0 LWP 2450 125 D-NETTM 9575 3D ARM IMPACT SPRINKLER APPLICATIONS For open field crops irrigation. BENEFITS AND FEATURES Higher and better yields The D-NetTM 9575 provides outstanding water distribution uniformity, due to the unique 3-D arm enabling, the highest uniformity in the market, respective to its flow rate and installation spacing. The D-NetTM 9575 provides maximum water-use efficiency Saves labor costs and multiple expenses on maintenance High robustness The D-NetTM 9575 has special design that makes the sprinkler more resistant and ensures high performance for a long product life. Extended product life The D-NetTM 9575 is made of UV-protected materials, making it durable under all climate conditions and with any applied nutrients. Flexible installation Can be installed on solid sets or on removable field stands. Easy to maintain A special nozzle key is designed to allow simple cleaning of the nozzle even under pressure. SPECIFICATIONS 5 different nominal flow rates: 1200, 1400, 1600, 1800, 2000 l/h. Nominal flow rates at 3.0 bar pressure. Recommended working pressure: 2.0 to 4.0 bar (at the sprinkler head). Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed to protect the system. When sand/ silt/ clay solids exceed 100 ppm, pretreatment will be applied according to NetafimTM expert team's instructions. Water trajectory: 24 degrees Inlet connection: 3/4" male threaded. Color coded nozzles for easy identification. 126 D-NETTM 9575 SPRINKLERS 2019 V1.0 PERFORMANCE TABLE RECTANGULAR SPACING NOZZLE SIZE CODE COLOR (MM) 3.57 + 2.5 Blue + yellow 3.96 + 2.5 Green + yellow 4.36 + 2.5 Grey + yellow 4.76 + 2.5 Yellow + yellow 5.10 + 2.5 Black + yellow WORKING PRESSURE (BAR) 2.0 2.5 3.0 3.5 4.0 2.0 2.5 3.0 3.5 4.0 2.0 2.5 3.0 3.5 4.0 2.0 2.5 3.0 3.5 4.0 2.0 2.5 3.0 3.5 4.0 FLOW RATE (L/H) 980 1095 1200 1296 1385 1145 1280 1400 1515 1620 1306 1460 1600 1727 1846 1471 1645 1800 1946 2081 1632 1825 2000 2160 2310 WETTED DIAMETER* (M) 22.0 22.0 23.0 24.0 24.0 23.0 24.0 25.0 25.0 26.0 23.0 25.0 25.0 26.0 26.0 22.0 25.0 26.0 27.0 28.0 22.0 25.0 27.0 28.0 29.0 12 x 12 6.8 7.6 8.3 9.0 9.6 8.0 8.9 9.7 10.5 11.3 9.1 10.1 11.1 12.0 12.8 10.2 11.4 12.5 13.5 14.5 11.3 12.7 13.9 15.0 16.0 12 x 15 5.4 6.1 6.7 7.2 7.7 6.4 7.1 7.8 8.4 9.0 7.3 8.1 8.9 9.6 10.3 8.2 9.1 10.0 10.8 11.6 9.1 10.1 11.1 12.0 12.8 PRECIPITATION (MM/H) SPACING (M X M) 12 x 18 15 x 15 4.5 4.4 5.1 4.9 5.6 5.3 6.0 5.8 6.4 6.2 5.3 5.1 5.9 5.7 6.5 6.2 7.0 6.7 7.5 7.2 6.0 5.8 6.8 6.5 7.4 7.1 8.0 7.7 8.5 8.2 6.8 6.5 7.6 7.3 8.3 8.0 9.0 8.6 9.6 9.2 7.6 7.3 8.4 8.1 9.3 8.9 10.0 9.6 10.7 10.3 15 x 18 4.8 5.1 4.2 4.7 5.2 5.6 6.0 4.8 5.4 5.9 6.4 6.8 6.1 6.7 7.2 7.7 6.8 7.4 8.0 8.6 18 x 18 5.0 4.9 5.3 5.7 5.6 6.0 6.4 6.2 6.7 7.1 TRIANGULAR SPACING NOZZLE SIZE CODE COLOR (MM) 3.57 + 2.5 Blue + yellow 3.96 + 2.5 Green + yellow 4.36 + 2.5 Grey + yellow 4.76 + 2.5 Yellow + yellow 5.10 + 2.5 Black + yellow WORKING PRESSURE (BAR) 2.0 2.5 3.0 3.5 4.0 2.0 2.5 3.0 3.5 4.0 2.0 2.5 3.0 3.5 4.0 2.0 2.5 3.0 3.5 4.0 2.0 2.5 3.0 3.5 4.0 FLOW RATE (L/H) 980 1095 1200 1296 1385 1145 1280 1400 1515 1620 1306 1460 1600 1727 1846 1471 1645 1800 1946 2081 1632 1825 2000 2160 2310 WETTED DIAMETER* (M) 22.0 22.0 23.0 24.0 24.0 23.0 24.0 25.0 25.0 26.0 23.0 25.0 25.0 26.0 26.0 22.0 25.0 26.0 27.0 28.0 22.0 25.0 27.0 28.0 29.0 12 x 12 6.8 7.6 8.3 9.0 9.6 8.0 8.9 9.7 10.5 11.3 9.1 10.1 11.1 12.0 12.8 10.2 11.4 12.5 13.5 14.5 11.3 12.7 13.9 15.0 16.0 12 x 15 5.4 6.1 6.7 7.2 7.7 6.4 7.1 7.8 8.4 9.0 7.3 8.1 8.9 9.6 10.3 8.2 9.1 10.0 10.8 11.6 9.1 10.1 11.1 12.0 12.8 PRECIPITATION (MM/H) SPACING (M X M) 12 x 18 15 x 15 4.5 4.4 5.1 4.9 5.6 5.3 6.0 5.8 6.4 6.2 5.3 5.1 5.9 5.7 6.5 6.2 7.0 6.7 7.5 7.2 6.0 5.8 6.8 6.5 7.4 7.1 8.0 7.7 8.5 8.2 6.8 6.5 7.6 7.3 8.3 8.0 9.0 8.6 9.6 9.2 7.6 7.3 8.4 8.1 9.3 8.9 10.0 9.6 10.7 10.3 15 x 18 3.6 4.1 4.4 4.8 5.1 4.2 4.7 5.2 5.6 6.0 4.8 5.4 5.9 6.4 6.8 5.4 6.1 6.7 7.2 7.7 6.0 6.8 7.4 8.0 8.6 18 x 18 4.3 3.5 4.0 4.3 4.7 5.0 4.0 4.5 4.9 5.3 5.7 5.1 5.6 6.0 6.4 5.6 6.2 6.7 7.1 * At least 0.5 mm/h **Performance table prepared under laboratory conditions, sprinkler head 1.0 meter above ground CU = > than 92% CU = > 88% and < 92% CU = > 86% and < 88% CU < 86% SPRINKLERS 2019 V1.0 D-NETTM 9575 127 PACKAGING DATA MODEL D-NetTM 9575 QUANTITY P/BOX UNIT 50 BOX SIZE (CM X CM X CM) 54 x 20 x 48 BOX WEIGTH (KG) 8.9 BOXES P/PALLET 20 D-NETTM 9575 CATALOG NUMBERS NOZZLE SIZE (MM) CODE COLOR 3.57 + 2.5 Blue + yellow FLOW RATE (L/H) * 1200 CATALOG NUMBER 60100-002000 3.96 + 2.5 Green + yellow 1400 60100-002010 4.36 + 2.5 Gray + yellow 1600 60100-002020 4.76 + 2.5 Yellow + yellow 1800 60100-002030 5.10 + 2.5 Black + yellow 2000 60100-002040 *Nominal flow rate at 3.0 bar working pressure D-NETTM 9575 SPRINKLER NOZZLES - ORDERS BY BOX ONLY NOZZLE SIZE (MM) CODE COLOR CATALOG NUMBER PER BOX* QUANTITY PER BOX Front nozzle 3.57 Blue 60101-000850 250 TOTAL UNITS P/PALLET 1000 PALLET WEIGTH (KG) 200 SPRINKLER ILLUSTRATION PRODUCT DRAW Front nozzle 3.96 Green 60101-000851 250 Front nozzle 4.36 Gray 60101-000852 250 Front nozzle 4.76 Yellow 60101-000853 250 Front nozzle 5.10 Black 60101-000854 250 Rear nozzle 2.50 Yellow 60101-000807 500 *The catalog number is for full box of nozzles COMPLEMENTARY PRODUCTS PRODUCT DESCRIPTION CATALOG NUMBER CONNECTOR ILLUSTRATIONS PRODUCT DESCRIPTION CATALOG NUMBER Socket 3/4" F TH 3/4" F TH 65080-004700 SPR Adap 1" and 3/4" FTH to 3/4" FTH 60101-000500 D-NetTM 9575 Nozzle Tool 1 unit 60100-003600 150 units/box 60100-003610 CONNECTOR ILLUSTRATIONS 128 D-NETTM 9575 SPRINKLERS 2019 V1.0 SPRINKLERS 2019 V1.0 D-NETTM 9575 129 D-NETTM 9575 AA 3D ARM IMPACT SPRINKLER WITH ADJUSTABLE ARC APPLICATIONS For open filed crops edge irrigation. BENEFITS AND FEATURES Road guard A simple adjustable arc enables to change the sprinkler from 360 degrees arc to any part circle. Higher and better yields The D-NetTM 9575 AA provides outstanding water distribution uniformity, due to the unique 3-D arm enabling, the highest uniformity in the market, respective to its flow rate and installation spacing. The D-NetTM 9575 AA provides maximum water-use efficiency Saves labor costs and multiple expenses on maintenance High robustness The D-NetTM 9575 AA has special design that makes the sprinkler more resistant and ensures high performance for a long product life. Extended product life The D-NetTM 9575 AA is made of UV-protected materials, making it durable under all climate conditions and with any applied nutrients. Flexible installation Can be installed on solid sets or on removable field stands. Easy to maintain A special nozzle key is designed to allow simple cleaning of the nozzle even under pressure. SPECIFICATIONS 2 different nominal flow rates: 850, 1030 l/h. Nominal flow rates at 3.0 bar pressure. Recommended working pressure: 2.5 to 4.0 bar (at the sprinkler head). Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed to protect the system. When sand/ silt/ clay solids exceed 100 ppm, pretreatment will be applied according to NetafimTM expert team's instructions. Water trajectory: 24 degrees Inlet connection: 3/4" male threaded. Color coded nozzles for easy identification. 130 D-NETTM 9575 AA SPRINKLERS 2019 V1.0 D-NETTM 9575 AA - PERFORMANCE TABLE NOZZLE SIZE (MM) CODE COLOR Front nozzle 3.57 Blue Front nozzle 3.96 Green * At least 0.5 mm/h PACKAGING DATA WORKING PRESSURE (BAR) 2.5 3.0 3.5 4.0 2.5 3.0 3.5 4.0 FLOW RATE (L/H) 776 850 918 982 940 1030 1112 1189 WETTED RADIUS* (M) 11.5 12.0 12.0 12.5 12.0 12.5 12.5 13.0 MODEL QUANTITY P/BOX UNIT D-NetTM 9575 AA 40 BOX SIZE (CM X CM X CM) 54 x 20 x 48 BOX WEIGTH (KG) 9.4 BOXES P/PALLET 20 TOTAL UNITS P/PALLET 800 PALLET WEIGTH (KG) 190 D-NETTM 9575 AA CATALOG NUMBERS NOZZLE SIZE (MM) NOZZLE CODE COLOR FLOW RATE (L/H) * CATALOG NUMBER SPRINKLER ILLUSTRATION 3.57 Blue 850 60100-002190 3.96 Green 1030 *Nominal flow rate at 3.0 bar working pressure D-NETTM 9575 AA SPRINKLER NOZZLES NOZZLE SIZE (MM) CODE COLOR Front nozzle 3.57 Blue Front nozzle 3.96 Green Plugged nozzle Black 60100-002191 CATALOG NUMBER 60100-002100 60100-002101 60100-001400 PRODUCT DRAW COMPLEMENTARY PRODUCTS PRODUCT DESCRIPTION CATALOG NUMBER Socket 3/4" F TH 3/4" F TH 65080-004700 Reducer Coupling 1" F TH - 3/4" F TH 60101-000500 CONNECTOR ILLUSTRATIONS PRODUCT DESCRIPTION CATALOG NUMBER D-NetTM 9575 AA Nozzle Tool 1 unit 60100-003600 150 units/box 60100-003610 CONNECTOR ILLUSTRATIONS SPRINKLERS 2019 V1.0 D-NETTM 9575 AA 131 HWP 2475 IMPACT SPRINKLER APPLICATIONS For open field crops irrigation. BENEFITS AND FEATURES Higher and better yields The HWP 2475 provides very good water distribution uniformity. The HWP 2475 provides maximum water-use efficiency Saves labor costs and multiple expenses on maintenance High robustness Resistant and ensures high performance for a long product life. Extended product life The HWP 2475 is made of UV-protected materials, making it durable under all climate conditions and with applied nutrients. Easy to maintain SPECIFICATIONS 3 different nominal flow rates: 2150, 2735, 3060 l/h. Nominal flow rates at 3.5 bar pressure. Recommended working pressure: 3.0 to 4.0 bar (at the sprinkler head). Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed to protect the system. When sand/ silt/ clay solids exceed 100 ppm, pretreatment will be applied according to NetafimTM expert team's instructions. Water trajectory: 24 degrees Inlet connection: 3/4" male threaded. Color coded nozzles for easy identification. 132 HWP 2475 SPRINKLERS 2019 V1.0 PERFORMANCE TABLE RECTANGULAR SPACING NOZZLE SIZE (MM) CODE COLOR 5.15 + 2.50 Black + yellow 5.50 + 3.17 Orange + black 5.96 + 3.17 Purple + black WORKING PRESSURE (BAR) 3.0 3.5 4.0 3.0 3.5 4.0 3.0 3.5 4.0 FLOW RATE (L/H) 1990 2150 2298 2532 2735 2924 2833 3060 3271 WETTED DIAMETER* (M) 29.0 30.0 31.0 30.0 33.0 35.0 31.0 33.0 34.0 12 x 12 13.8 14.9 16.0 17.6 19.0 20.3 19.7 21.3 22.7 PRECIPITATION (MM/H) SPACING (M X M) 12 x 15 12 x 18 15 x 15 15 x 18 11.1 9.2 8.8 7.4 11.9 10.0 9.6 8.0 12.8 10.6 10.2 8.5 14.1 11.7 11.3 9.4 15.2 12.7 12.2 10.1 16.2 13.5 13.0 10.8 15.7 13.1 12.6 10.5 17.0 14.2 13.6 11.3 18.2 15.1 14.5 12.1 18 x 18 6.1 6.6 7.1 7.8 8.4 9.0 8.7 9.4 10.1 20 x 20 5.0 5.4 5.7 6.3 6.8 7.3 7.1 7.7 8.2 PERFORMANCE TABLE TRIANGULAR SPACING NOZZLE SIZE (MM) CODE COLOR 5.15 + 2.50 Black + yellow 5.50 + 3.17 Orange + black 5.96 + 3.17 Purple + black WORKING PRESSURE (BAR) 3.0 3.5 4.0 3.0 3.5 4.0 3.0 3.5 4.0 FLOW RATE (L/H) 1990 2150 2298 2532 2735 2924 2833 3060 3271 WETTED DIAMETER* (M) 29.0 30.0 31.0 30.0 33.0 35.0 31.0 33.0 34.0 12 x 12 13.8 14.9 16.0 17.6 19.0 20.3 19.7 21.3 22.7 PRECIPITATION (MM/H) SPACING (M X M) 12 x 15 12 x 18 15 x 15 15 x 18 11.1 9.2 8.8 7.4 11.9 10.0 9.6 8.0 12.8 10.6 10.2 8.5 14.1 11.7 11.3 9.4 15.2 12.7 12.2 10.1 16.2 13.5 13.0 10.8 15.7 13.1 12.6 10.5 17.0 14.2 13.6 11.3 18.2 15.1 14.5 12.1 18 x 18 6.1 6.6 7.1 7.8 8.4 9.0 8.7 9.4 10.1 20 x 20 5.0 5.4 5.7 6.3 6.8 7.3 7.1 7.7 8.2 * At least 0.5 mm/h **Performance tables prepared under laboratory conditions, sprinkler head 1.0 meter above ground CU = > than 92% CU = > 88% and < 92% CU = > 86% and < 88% CU < 86% SPRINKLERS 2019 V1.0 HWP 2475 133 PACKAGING DATA MODEL HWP 2475 QUANTITY P/BOX UNIT 70 BOX SIZE (CM X CM X CM) 54 x 20 x 48 BOX WEIGTH (KG) 10.8 BOXES P/PALLET 20 TOTAL UNITS P/PALLET 1400 PALLET WEIGTH (KG) 230 HWP 2475 CATALOG NUMBERS NOZZLE SIZE (MM) CODE COLOR 5.15 + 2.50 Black + Yellow FLOW RATE (L/H) * 2150 5.50 + 3.17 Orange + Black 2735 5.96 + 3.17 Purple + Black *Nominal flow rate at 3.5 bar working pressure 3060 HWP 2475 SPRINKLER NOZZLES - ORDERS BY BOX ONLY NOZZLE SIZE (MM) CODE COLOR CATALOG NUMBER PER BOX* Front nozzle 5.15 Black 60101-000854 CATALOG NUMBER 60100-004200 60100-004201 60100-004202 QUANTITY PER BOX 250 SPRINKLER ILLUSTRATION PRODUCT DRAW Front nozzle 5.50 Orange 60101-000855 250 Front nozzle 5.96 Purple 60101-000856 250 Rear nozzle 2.50 Yellow 60101-000807 500 Rear nozzle 3.17 Black 60101-000809 500 *The catalog number is for full box of nozzles COMPLEMENTARY PRODUCTS PRODUCT DESCRIPTION CATALOG NUMBER Socket 3/4" F TH - 3/4" F TH 65080-004700 SPR Adap 1" and 3/4" FTH to 3/4" FTH 60101-000500 CONNECTOR ILLUSTRATIONS PRODUCT DESCRIPTION Nozzle Tool CATALOG NUMBER 1 unit 60100-003600 150 units/box 60100-003610 CONNECTOR ILLUSTRATIONS 134 HWP 2475 SPRINKLERS 2019 V1.0 SPRINKLERS STANDS COMPLEMENTARY ACCESSORIES CONNECTORS AND STAND ACCESSORIES SPR STAND F&S CONN FEMALE/BARB BROWN SPR STAND FTN F&S CONN FEMALE/ 1/2" MTH START CONNECTOR TO PE 65080-005010 SPR STAND QUICK CONN MALE/BARB 12+"O" RING 65080-005060 MALE / BARB CONNECTOR For tube 6*8 64520-002200 For tube 9*12 65080-002871 IMPC SPR HOUSING 1/2" FTH - BARB 9*12 FOR 8 MM ROD 65080-000900 QC CV VALVE 3/4" 60100-003700 SPRINKLER SOCKET 1/2" FTH - 1/2" FTH 65080-004700 3/4" FTH - 3/4" FTH 65080-004700 BUSHING CONNECTOR 3/4" FEMALE - 1/2" MALE 78220-003900 PRESSURE REGULATOR P.R.V. 2000 3/4" FTH 3.0 bar 43 PSI 30500-001700 65080-005210 SPR STAND F&S CONN LOCKING SLEEVE 12 65080-005090 MALE PLUG 65080-002880 FLAT FEMALE / BARB CONNECTOR 65080-002600 QC SPRINKLER COUPLING CONNECTOR 3/4" (2 PARTS) 60100-003720 QC KEY RISER 3/4" 60100-003710 SPRINKLER SOCKET SPR Adap 1" and 3/4" FTH to 3/4" FTH 60101-000500 SPR Adap 1" and 3/4" FTH to 1/2" FTH 60101-000501 PRESSURE REGULATOR WITH FLOW STRAINTENER AND 3/4" SOCKET PRV flow regulator assembly 3.0 bar with flow straightener and socket 3/4" FTH 60101-000611 Barb for tube 9*12 32500-003705 START CONNECTOR TO PVC Barb for tube 9*12 32500-003706 REDUCTION NIPPLE 3/4" MALE - 1/2" MALE 78220-007700 BUSHING CONNECTOR 3/4" MALE - 1/2" FEMALE 78220-004100 METAL ROD 6 mm diameter, 100 cm length 65080-001100 6 mm diameter, 120 cm length 65080-001200 8 mm diameter, 100 cm length 65080-001600 8 mm diameter, 120 cm length 65080-001700 P.R.V. IN-LINE 3/4" FTH / 1/2" FTH 2.5 BAR 35 PSI 31000-002200 SPRINKLERS 2019 V1.0 HWP 2475 135 NETAFIMTM FLEXIBLE PIPES FLEXNETTM AND FLEXNETTM HP The industry's ideal piping solutions for mainline and distribution laterals applications. High-performance and cost-efficient products, FlexNetTM and FlexNetTM HP features unique integral welded outlets that lower installation costs while ensuring a secure, leakage-free connection between distribution pipes and laterals. Available in a wide range of diameters, Netafim's flagship pipe addresses the design requirements of any on-surface or subsurface irrigation deployment. A thermostatic collapsible irrigation pipe, offers many advantages over other pipe solutions. They are highly portable, flexible and light weight, thereby reducing manpower, freight, maintenance and storage requirements. Are also versatile and durable, enabling it to withstand the most stringent climatic and environmental conditions. The comprehensive NetafimTM flexible pipes solutions are equipped with connector kits and an array of branching and lateral fittings, making them compatible with all NetafimTM systems. Requiring no specialized installation tools and designed for Netafim's industry-leading recoiling machinery, the user friendly NetafimTM flexible pipes are extremely easy to layout and recoil. Rounding out Netafim's industry-leading drip irrigation offering, they are a cost-effective piping solution that meets the diverse needs of professional growers worldwide. 136 FLEXNETTM AND FLEXNETTM HP SPRINKLERS 2019 V1.0 FLEXNETTM HP DIAMETER DISTANCE BETWEEN OUTLETS (M) 2"/51mm 5.0 3"/78mm 5.0 COIL LENGTH 100 METER 43000-007240 43000-010225 DIAMETER DISTANCE BETWEEN OUTLETS (M) 2"/51mm 6.0 3"/78mm 6.0 COIL LENGTH 96 METER 43000-010250 DIAMETER DISTANCE BETWEEN OUTLETS (M) 2"/51mm 7.0 3"/78mm 7.0 COIL LENGTH 98 METER 43000-007252 43000-010270 DIAMETER DISTANCE BETWEEN OUTLETS (M) 2"/51mm 8.0 3"/78mm 8.0 COIL LENGTH 96 METER 43000-007275 43000-010285 DIAMETER DISTANCE BETWEEN OUTLETS (M) 2"/51mm 9.0 3"/78mm 9.0 COIL LENGTH 99 METER 43000-007288 43000-010320 DIAMETER DISTANCE BETWEEN OUTLETS (M) 2"/51mm 10.0 3"/78mm 10.0 COIL LENGTH 100 METER 43000-007360 43000-010300 DIAMETER DISTANCE BETWEEN OUTLETS (M) 2"/51mm 12.0 3"/78mm 12.0 COIL LENGTH 96 METER 43000-007419 FLEXNETTM DIAMETER DISTANCE BETWEEN OUTLETS (M) 2"/51mm 5.0 3"/78mm 5.0 COIL LENGTH 100 METER 43002-000760 DIAMETER DISTANCE BETWEEN OUTLETS (M) 2"/51mm 6.0 3"/78mm 6.0 COIL LENGTH 102 METER 43002-000765 43002-002162 DIAMETER DISTANCE BETWEEN OUTLETS (M) 2"/51mm 7.0 3"/78mm 7.0 COIL LENGTH 98 METER 43002-000770 DIAMETER DISTANCE BETWEEN OUTLETS (M) 2"/51mm 8.0 3"/78mm 8.0 COIL LENGTH 96 METER 43002-000775 DIAMETER DISTANCE BETWEEN OUTLETS (M) 2"/51mm 9.0 3"/78mm 9.0 COIL LENGTH 99 METER 43002-000780 DIAMETER DISTANCE BETWEEN OUTLETS (M) 2"/51mm 10.0 3"/78mm 10.0 COIL LENGTH 100 METER 43002-001000 DIAMETER DISTANCE BETWEEN OUTLETS (M) 2"/51mm 12.0 3"/78mm 12.0 COIL LENGTH 96 METER 43002-001012 43002-002152 DIAMETER DISTANCE BETWEEN OUTLETS (M) 2"/51mm 14.0 3"/78mm 14.0 COIL LENGTH 108 METER 43000-010570 DIAMETER DISTANCE BETWEEN OUTLETS (M) 2"/51mm 18.0 3"/78mm 18.0 COIL LENGTH 108 METER 43000-010590 Missing catalog numbers available upon request Different coil lengths achieve the need to supply at the beginning and the end of the coil "half" the distance between outlets SPRINKLERS 2019 V1.0 FLEXNETTM AND FLEXNETTM HP 137 MICRO-TUBES AND TUBES, COMPLEMENTARY ACCESSORIES SPE 6*8 MM BLACK MICRO-TUBE SPE 9*11 MM BLACK MICRO-TUBE 100 meter coil 200 meter coil 500 meter coil 40000-006510 40000-006560 40000-006580 100 meter coil 500 meter coil 40000-007510 40000-007550 SPE 6*8 MM BLACK MICRO-TUBE SPE 9*11 MM BLACK MICRO-TUBE PIECES 60 cm length 40000-006160 100 cm length 40000-006210 120 cm length 40000-006260 120 cm length 40000-006310 150 cm length 40000-006360 60 cm length 40000-007001 90 cm length 40000-007050 120 cm length 40000-007080 150 cm length 40000-007110 PE 16 MM BLACK PIPE (13.2 MM ID - 1.4 MM WT) 200 meter coil PE 16 MM BLACK PIPE (13.2 MM ID - 1.4 MM WT) PIECES 40500-001490 120 cm length 40500-001480 SPE 4*6.5 MM BLACK MICRO-TUBE COILS 200 meter coil 500 meter coil SPE 4*6.5 MM BLACK MICRO-TUBE PIECES 30 cm length 40000-005040 45 cm length 40001-003440 60 cm length 40000-005100 75 cm length 40001-003460 90 cm length 40000-005170 120 cm length 40000-005260 150 cm length 40000-005340 40000-004800 40000-004900 SPE 9*12 MM BLACK MICRO-TUBE 100 meter coil 40000-005530 SPE 9*12 MM BLACK MICRO-TUBE PIECES 60 cm length 40000-005460 90 cm length 40000-005480 100 cm length 40000-005490 120 cm length 40000-005510 150 cm length 40000-005520 200 cm length 40000-005525 138 MICRO-TUBES AND TUBES, COMPLEMENTARY ACCESSORIES SPRINKLERS 2019 V1.0 SPE 4*6.5 MM BLACK MICRO-TUBE PIECES + BARB CONNECTOR 30 cm length 63000-004100 46 cm length 63000-004500 60 cm length 63000-005900 75 cm length 63000-006500 90 cm length 63000-007200 120 cm length 63000-008400 150 cm length 63000-009000 SSPE 4*6.5 MM GRAY MICRO-TUBE COILS SPE 4*6.5 MM BLACK MICRO-TUBE PIECES + BARB CONNECTOR + FEMALE CONNECTOR 30 cm length 63000-004000 46 cm length 63000-004400 60 cm length 63000-005800 75 cm length 63000-006400 90 cm length 63000-007100 120 cm length 63000-008300 150 cm length 63000-008900 SPE 4*6.5 MM BLACK MICRO-TUBE PIECES + MALE CONNECTOR + FEMALE CONNECTOR 30 cm length 63000-003700 46 cm length 63000-004200 60 cm length 63000-005500 75 cm length 63000-006100 90 cm length 63000-006800 120 cm length 63000-008000 150 cm length 63000-008600 SPE 4*6.5 MM BLACK MICRO-TUBE PIECES + MALE CONNECTOR 30 cm length 63000-003600 46 cm length 63000-005200 60 cm length 63000-005400 75 cm length 63000-006000 90 cm length 63000-006700 120 cm length 63000-007900 150 cm length 63000-008500 200 meter coil 500 meter coil SSPE 4*6.5 MM GRAY MICRO-TUBE PIECES 40000-004850 40000-004950 15 cm length 40000-005020 30 cm length 40000-005070 46 cm length 40001-003400 60 cm length 40000-005120 75 cm length 40001-003420 90 cm length 40000-005190 120 cm length 40000-005280 150 cm length 40000-005360 SSPE 4*6.5 MM GRAY MICRO-TUBE PIECES + BARB CONNECTOR + FEMALE CONNECTOR + ASSEMBLY STABILIZER 15 cm length 63000-003570 30 cm length 63000-004060 46 cm length 63000-004450 60 cm length 63000-005860 75 cm length 63000-006450 90 cm length 63000-007160 120 cm length 63000-008350 150 cm length 63000-008950 SSPE 4*6.5 MM GRAY MICRO-TUBE PIECES + MALE CONNECTOR + FEMALE CONNECTOR + ASSEMBLY STABILIZER 15 cm length 63000-003550 30 cm length 63000-003820 46 cm length 63000-004320 60 cm length 63000-005620 75 cm length 63000-006220 90 cm length 63000-006920 120 cm length 63000-008120 150 cm length 63000-008720 SPRINKLERS 2019 V1.0 MICRO-TUBES AND TUBES, COMPLEMENTARY ACCESSORIES 139 FROSTIE FROST MITIGATION CONTROLLER. SINGLE STATION VALVE CONTROLLER POWERED BY 2 AA ALKALINE BATTERIES. BUILT IN PRECISION TEMPERATURE AND HUMIDITY SENSORS. 00045-001620 PRODUCTS DISPLAY BOX 63000-012600 140 MICRO-TUBES AND TUBES, COMPLEMENTARY ACCESSORIES SPRINKLERS 2019 V1.0 TOOLS PUNCH 3 MM PUNCH 8 MM SPIRAL PUNCH 3 MM FOR 12 TO 32 MM PIPE DIAMETER 45000-001000 PUNCH 3 MM + INSERTER 45000-001400 45000-001630 PUNCH 8 MM + INSERTER 45000-001320 SCREW PUNCH , 8 MM 45000-002400 CONNECTORS AND FITTINGS INSERTER 45000-002270 SPRINKLERS 2019 V1.0 45000-001450 PUNCH 3 MM FOR 16 AND 20 MM PIPE DIAMETER 45000-001600 TOO LS 141 06-0219SPR-CT-0003-EN GROW MORE WITH LESS WWW.NETAFIM.COMAdobe InDesign CC 14.0 (Macintosh) Adobe PDF Library 15.0