28308 Mi 360 Home Security Camera 2K Pro HK version 说明书 V1.8 200721

28308 Mi 360 Home Security Camera 2K Pro HK ... - Panmi

Mi 360° Home Security Camera 2K Pro User Manual 12. 使用產品前請仔細閱讀本說明書,並妥善保管。 產品介紹. 包裝清單:小米智能攝影機2K Pro 雲台版、 ...

小米智能攝影機2K Pro 雲台版使用說明書1 Mi 360° Home ...

30 nov 2020 —

PDF 28308 Mi 360 Home Security Camera 2K Pro HK version...

產品介紹 使用產品前請仔細閱讀本說明書並妥善保管。 指示燈 鏡頭 麥克風孔 MicroSD 卡槽 鏡頭向上 時可見. 前視圖. 麥克風孔. 注意事項. 本產品適用的工作溫度為 -10℃~40℃請勿在溫度過高或過低的環...

Not Your Device? Search For Manuals / Datasheets:

File Info : application/pdf, 1 Pages, 1.64MB

Document
PDF 28308 Mi-360-Home-Security-Camera-2K-Pro-HK-version 说明书 V1.8 200721
     
 588111001A 852-30773620 www.mi.com/hk/service
Manufactured for: Xiaomi Communications Co., Ltd. Manufactured by: Shanghai Imilab Technology Co., Ltd.
(a Mi Ecosystem company) Address: Room 001A, Floor 11, Block 1, No. 588 Zixing Road, Minhang District,
Shanghai, China Service Line: 852-30773620 For further information, please go to www.mi.com/hk/service

2K Pro   1 Mi 360° Home Security Camera 2K Pro User Manual 12

 

   MicroSD   




Reset


Micro-USB    


2K Pro    1. 
6mm30mm
2. 

2K Pro 



1

2

3.   
4.  

 MicroSD
MicroSD MicroSD MicroSD
MicroSD32GB MicroSDU1/Class10
MicroSD



1. 3

2. 

3

4

 Micro-USB 

APP
APP QR CodeAPPAPP Google PlayApple App Store APP APP+APP

Reset

 APP



/







5

APP APP  
 APP 5APP MicroSD
6


APP2K Pro   

 9

2K Pro  MicroSD   MicroSDAPP 2K Pro  16 


 APP  APP2K Pro    

7

8


APP2K Pro   APP

APP2K Pro    



 2K Pro  



MJSXJ06CM



122×78×78mm 349g

   

5V

2A

1296p







110° F1.4



-10~40



H.265

Android 4.4  iOS 9.0  MicroSD32GB

Wi-Fi IEEE 802.11a/b/g/n/ac 2.4GHz/5GHz 4.2











9

10


 -10~40      Wi-FiWi-Fi  

Product Overview
Read this manual carefully before use, and retain it for future reference. The nameplate of this camera is located on its bottom.

Indicator
Lens Microphone
MicroSD Card Slot (Visible when lens is facing upward)

Microphone Front View

Reset
Rear View

Micro-USB Power Port Loudspeaker
Reset Button

Package Contents: Mi 360° Home Security Camera 2K Pro, power adapter,

charging cable, wall mounting kit, user manual

11

12

Installation
The Mi 360° Home Security Camera 2K Pro can be placed on horizontal surfaces, such as desks, dining tables, and co ee tables. It can also be mounted on a wall. Mounting the camera on a wall 1. First use a pencil to mark the positions for the base mounting holes on the wall, then drill two holes at the marked positions. The diameter of each hole is approximately 6 mm, and the depth is approximately 30 mm.
2. Insert a plastic wall plug into each drilled hole.
13

3. Place the side of the base with arrows facing forward, and then align the holes. Insert the screws and then tighten them into the wall plugs with a Phillips head screwdriver.
4. Align the grooves on the bottom of the camera with the raised part on the base, and then turn it clockwise until it locks into place.
Notes: 1. The wall must be able to support at least three times the total weight of the camera. 2. To prevent possible injury, the camera must be securely xed to the ceiling or wall according to the installation instructions.
14

How to Use
Installing a MicroSD card Make sure the camera is turned o . Push the lens upward to reveal the MicroSD card slot. Insert the microSD card into the card slot with its contact points facing downward. Note: Disconnect the camera from the power before installing or removing a MicroSD card. Please use a genuine MicroSD card (up to 32GB) manufactured by a quali ed supplier. It is recommended to use a card with a reading/writing speed of no less than U1/Class 10.
MicroSD
15

Turning on the camera Plug the charging cable into Micro-USB port on the back, the camera automatically turns on, and the indicator quickly blinks orange.
Reset
Note: When the camera is working, do not turn the lens of the camera nor force it to rotate. If the positioning of the lens is inaccurate, please calibrate it in the Mi Home/Xiaomi Home app. Indicator Blue: Connected successfully/Working properly Blinking blue: Network error Quickly blinking orange: To be connected Slowly blinking orange: Updating
16

Connect with Mi Home/Xiaomi Home App
This product works with Mi Home/Xiaomi Home app *. Control your device, and interact it and other smart home devices with Mi Home/Xiaomi Home app. Scan the QR code to download and install the app. You will be directed to the connection setup page if the app is installed already. Or search "Mi Home/Xiaomi Home" in the app store to download and install it. Open Mi Home/Xiaomi Home app, tap "+" on the upper right, and then follow prompts to add your device. * The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of the app displayed on your device should be taken as the default.
Note: The version of the app might have been updated, please follow the instructions based on the current app version. Make sure the camera turns on and the network connection is stable during connecting. The indicator is quickly blinking orange when waiting for a connection, and turns into blue once the camera is successfully connected.
Restoring factory settings In case the network the camera is connected to, or the Mi account the camera is paired with has to be changed, use a pin to press and hold the reset button for about ve seconds to restore factory settings. Then reconnect the network and the app with the camera. Note: Restoring factory settings will not delete the content on the MicroSD card.
17

Real-time Surveillance
In the app, you can view the real-time surveillance, adjust the sharpness of the image, adjust the horizontal and vertical angles, capture and record, and make calls.
Infrared Night Vision
The camera can automatically switch to night vision mode at night according to the change in ambient light. The camera is equipped with built-in infrared night vision lights reaching a night vision distance of up to 9 meters, which enables it to clearly capture videos in the dark.
Playback
The playback feature of the camera is only available when a compatible MicroSD card is installed. Once a MicroSD card is installed and the camera is plugged in, it will automatically start recording video. Tap the playback button in the app, then drag the timeline to select the time period you want to playback. The maximum supported playback speed is 16x.
18

Home Surveillance Assistant
When the home surveillance assistant is enabled, the camera will record videos if it detects human movement and changes in real-time within its surveilled area. Then you will get the app push noti cation. You can enable or disable the function of automatic surveillance in the app. You can set 24-hour, daytime, nighttime, custom period surveillance, alert sensitivity and alert time intervals, etc.

Video Sharing
In the app, you can select the device sharing option in the settings menu to share the camera with others. The users, you share the camera with, need to download the Mi Home/Xiaomi Home app and log in with their Mi account to view contents.
Physical Lens Blocking
When recording is not required, tap " " in the app to enable the physical lens blocking function. The camera will automatically adjust the lens so that it is covered by the casing of the camera itself to protect the user's privacy.

Normal

Blocked

Note: Illustrations of product, accessories, and user interface in the user

manual are for reference purposes only. Actual product and functions may

vary due to product enhancements.

19

20

Speci cations

Name: Mi 360° Home Security Camera 2K Pro

Model: MJSXJ06CM

Net Weight: 349 g

Item Dimensions: 122 × 78 × 78 mm

Input: 5 V 2 A

Viewing Angle: 110°

Resolution: 1296p

Aperture: F1.4

Video Codec: H.265

Operating Temperature: -10°C to 40°C

Compatible with: Android 4.4 & iOS 9.0 or above

Storage: MicroSD card (up to 32 GB)

Wireless Connectivity: Wi-Fi IEEE 802.11a/b/g/n/ac 2.4 GHz/5 GHz,

Bluetooth 4.2

Precautions
The operating temperature range for this camera is between -10°C and 40°C. Do not use the camera in environments with temperatures above or below the speci ed range. The camera is a precision electronic product. In order to ensure its normal operation, do not install the camera in environments with high humidity levels nor allow water to get into it. To improve the camera's performance, do not place its lens facing or next to a re ective surface, such as glass windows or white walls. As this will cause the image to appear overly bright in areas close to the camera and darker in areas further away, or cause the camera to produce white images. Make sure the camera is installed in an area with a strong Wi-Fi signal. Do not place the camera near the objects that may a ect its Wi-Fi signal, such as metal objects, microwave ovens.

21

22


Adobe PDF library 15.00 Adobe Illustrator(R) 24.0