J.Burrows Paper Shredder Instruction Manual

JBURROWS Warranty 8 years

Product Warranty – valid for Australian customers only

Officeworks Ltd warrants that this product will be free from defects and work as intended for 8 years from the date of purchase by the original customer. If the product has any defects or does not work as intended during the Warranty Period, Officeworks will, at its election and at its expense, repair or replace the product.

This warranty does not apply:

• to cosmetic damage;
• to damage caused by consumables used in connection with the product (such as shredder oil);
• where the product has not been used in accordance with all provided instructions;
• to damage arising from fair wear and tear;
• where the product has not been subject to reasonable use;
• where the product has been intentionally or negligently damaged; and/or
• if the customer has attempted to repair the product.

To make a claim under this warranty, please return your product with your receipt or proof of purchase to your nearest Officeworks store or contact 1300 633 423.

This warranty is provided in addition to any rights you may be entitled to under the Competitions & Consumer Act 2010.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

KNOW YOUR APPLIANCE

Diagram showing the parts of the shredder:

• REV/AUTO switch
• Paper entry slot
• Overheat protection indicator (red) light
• Power indicator (green) light
• Letter opener slot
• ON/OFF button
• See-through window for waste bin
• Main housing
• Waste bin
• Casters for mobility

USING YOUR SHREDDER

SETTING UP THE SHREDDER

1. Remove the shredder from its carton and unwind the cord to its full length.
2. Place the waste bin on a firm level surface in a stable upright position.
3. Make sure the function switch is in the “OFF” position.
4. Connect the plug to the 220-240V AC mains.

AUTO MODE

1. To use this mode, turn the function switch to "AUTO".
2. Feed the paper into the paper throat; the shredder will operate to shred the paper.
3. Once all the papers have been shredded, it will stop itself.

OFF MODE

To switch the shredder off, turn the function switch to the "OFF" position.

REVERSE MODE

1. To switch the shredder to this mode, switch the function switch to "REV" position.
2. The cutting blade in the shredder will run in the reverse direction.

LETTER OPENER

1. Slide envelope edge into the letter opener slot and pull from left to right.

Officeworks Ltd. | 236-262 East Boundary Road | Bentleigh East VIC 3165 | AUSTRALIA

PAPER JAM

1. Turn the function switch to "REV" position to let the cutting blade run in the reverse direction. The paper will reverse out from the throat.
2. Pull out the paper carefully to clear the throat.
3. Once the jammed paper is removed, turn the function switch to "AUTO" position for normal operation.

DISPOSE OF WASTE

1. Ensure power is off at mains.
2. Dispose of shredder waste.
3. Re-assemble shredder correctly before shredding.

MOTOR OVERHEAT SAFETY DEVICE

Your shredder is fitted with a safety device that switches off the unit in event of an overload. During an overload situation, the unit will stop automatically, and the overheat protection indicator will light up. Turn the unit off and unplug from the mains. Allow the motor to cool down to room temperature before resuming operation. If the unit fails to operate or the safety device switches the unit off again, return the unit.

PRODUCT SPECIFICATION

CLEANING

The paper shredder requires regular cleaning.

1. Before cleaning, ensure power is switched off at mains and plug has been removed.
2. Clean the outer surface with a soft damp cloth only.
3. Ensure the unit is dry before connecting to the mains.

IMPORTANT SAFETY WARNINGS

When using electrical appliances, basic safety precautions should always be observed, including the following:

• Read all the instructions carefully before using.
• To protect against electric shock, do not immerse the machine in water or any other liquid.
• Do not operate the appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner. Return the appliance to the nearest authorized service centre.
• Remove any pins or paper clips from paper before shredding.
• Do not shred film, label paper, clothing, or plastic.
• Not intended for use by children.
• Always operate the shredder on a flat surface.
• A full waste bin may lead to a paper jam; empty the waste bin before it is full.
• Retain this instruction manual for further reference.

Shredder will stop shredding after a period of continuous use. Wait for the shredder to cool down before trying again. Check product instructions for run times.