Owner's Manual for BackYard models including: SKYFORT II Swing Set
READ THE ASSEMBLY MANUAL COMPLETELY, PAYING SPECIAL ATTENTION TO THE IMPORTANT TIPS AND. SAFETY INFORMATION. •. AFTER YOU HAVE READ THE ASSEMBLY MANUAL, ...
SKYFORT II SWING SET
Model # 6113 rev. C Owner's Manual & Assembly Instructions
MANUFACTURED BY: Backyard Discovery 3305 Airport Drive Pittsburg, KS 66762 800-856-4445
average 2 person assembly time
assembly time may vary based on skill level
For the most up to date assembly manual, to register your set, or to order replacement parts please visit
www.backyarddiscovery.com
SAVE THIS ASSEMBLY MANUAL FOR FUTURE REFERENCE IN THE EVENT THAT YOU NEED TO ORDER REPLACEMENT PARTS.
Made in China INS-6113-C-SKYFORT-ENG-07-
With Go Configure, we bring you 18 years of experience right to your doorstep. We service a wide array of indoor and outdoor recreation products that most consumers
don't have the time or ability to deliver & install themselves.
We do the heavy lifting, so you don't have to!
· 18+ Years of Experience Servicing Big Box Retailers and Direct Consumers · Highly Skilled, Specialized, Courteous, Professional Service Technicians · Over 140,000 Installations Annually · White Glove Service
· Satisfaction Guarantee · Flexible Appointments, including weekends · Coverage across the nation Visit www.goconfigure.com for more info!
*Installation services are only available to U.S. customers.
2
STOP
PARE
Missing A Part? CALL US BEFORE GOING
BACK TO THE STORE!
The store where you made your purchase does not stock parts for this item.
If you have assembly questions or if you need parts, whether they are missing or damaged
Call Toll-Free Help Line or visit www.EDFN\DUGGLVFRYHU\.com
>>DEK^Ed^Z'Z^Z>d/E >ZZZZZ ^ZZZ
Z
1-800-765-4138
PLEASE READ THIS BEFORE STARTING ASSEMBLY WKZ&sKZ>^d^/E^dZh/KE^Ed^KDEZ>E^D>:
· Zd,^^D>zDEh>KDW>d>zWz/E'^W/>ddEd/KEdKd,/DWKZdEdd/W^E ^&dz/E&KZDd/KE
· &dZzKh,sZd,^^D>zDEh>zKht/>>>dK//&zKhEWZK&^^/KE> ,>WdKKDW>dd,^^D>zK&d,W>z^d
· ^WZdE/Ed/&z>>WZd^dKD<^hZd,dzKh,s>>K&d,WZd^>/^d · /&zKhEd&/E>>K&d,WZd^,<d,W</E'DdZ/>^D>>WZd^Dz,s&>>E/EdK/d
hZ/E'^,/WDEd · ,)<28+$9(352%/(06:,7+7+($66(0%/<25,)$1<3$57,60,66,1*25'$0$*('3/($6(&$// · +(/3/,1(259,6,7ZZZEDFN\DUGGLVFRYHU\FRP
· >>DEh>E^D>:KDW>dDEdWZ^dEK^W/>dE/ME>K^KE^:K^jd/>^ /DWKZdEd^z>/E&KZD/ME^KZ^'hZ/
· ^Wh^Yh,z>1K>DEh>E^D>:WKZ//Z^/E^/dzhWZK&^/KE> WZ&dhZ>E^D>:>hE/:h'K^
· ^WZ/Ed/&/YhdK^>^W/^WZKDWZKZYh/^WKEdK^>^WZd^/E/^ · ^/EKWhEKEdZZdK^>^W/^Zs/^>DdZ/>DWYh^WK^/>Yh>'hE^
W/^WYhH^WhE,Z^1K>>1hZEd>Es1K · ^/d/EWZK>D^KE>E^D>:K^/>'hEW/&>dK^dH>>D>>1E
zh>Ks/^/dZZZEDFN\DUGGLVFRYHU\FRP
PLEASE HAVE THE FOLLOWING INFORMATION WHEN YOU MAKE YOUR CALL:
1 MODEL NUMBER OF THE PRODUCT LOCATED ON THE FRONT OF THE ASSEMBLY MANUAL 2 DESRIPTION OF THE PART FROM THE PARTS LIST
POR FAVOR TENGA VISIBLE LA SIGUIENTE INFORMACIÓN CUANDO LLAME:
1 - NÚMERO DE MODELO DEL PRODUCTO QUE SE ENCUENTRA UBICADO AL FRENTE DEL MANUAL DE ENSAMBLAJE 2 - DESCRIPCIÓN DE LA PIEZA QUE SE ENCUENTRA EN LA LISTA DE PIEZAS
3
Owner's Manual Play Set
Dear Customer: Please read entire booklet completely before beginning the assembly process.
Equipment is recommended for use by children 3 to 10 years of age. Structures are not intended for public use. The Company does not warranty any of its residential structures subjected to commercial use such as: Daycare, Preschool, Nursery School, Recreational Park, or any similar Commercial Application.
WARNING: This Symbol points out important safety instructions which, if not followed, could endanger the personal safety of yourself and your children and/or damage your property. You MUST read and follow all instructions in this manual before attempting to use this playcenter.
WARNING: Children must NOT use this playcenter until unit has been completely assembled and inspected by an adult to insure set has been properly installed and anchored.
Please follow all recommendations below. Failure to do so may result in the warranty being void and/or safety violations that could result in serious injury. This manual contains helpful information concerning Assembly Preparation, Installation Procedure, and Required Maintenance. Always keep the safety of your children in mind as your play structure is being built and as your children play on the set. Before your children play on the set please review the Operation Instructions with them to help ensure their safety.
PLEASE RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE. KEEP THEM IN A SAFE PLACE WHERE YOU CAN REFER TO THEM AS NEEDED. IN ORDER TO PROVIDE YOU WITH THE MOST EFFICIENT SERVICE, IT IS REQUIRED THAT YOU PROVIDE US WITH THE PART NUMBERS WHEN ORDERING PARTS.
For Your Records:
Please take time and fill out the information below. This information will be needed for warranty
issues. Where Purchased: ____________________
Staple Receipt Here
Date of Purchase: ____________________
Installation Date: _____________________
Installed by: _________________________
Tracking Number: ____________________
OR
Tracking Number
Vertical ID Plate Tracking Number Reference Label Tracking ID number on the carton and back of the ID plate or vertical ID plate are included for tracking purposes associated with warranty claims.
Rev01/12/18
4
Owner's Manual Play Set
Rev01/12/18
5
Owner's Manual Play Set
Please refer to the Assembly section of the Assembly Manual for Maximum Fall Height
Positioning Your Playcenter
1. The Playcenter is designed to be installed on a level surface by an Adult with an Adult helper. Place in a flat area of your yard to minimize ground preparation.
2. Choose a level location for the equipment. This can reduce the likelihood of the play set tipping over and loose-fill surfacing material washing away during heavy rains.
3. Place the equipment not less than 6 ft (1.8 m) from any structure or obstruction such as a fence, garage, house, overhanging branches, laundry lines, or electrical wires.
4. Provide enough room so that the children can use the equipment safely. For example, for structures with multiple play activities, a slide should not exit in front of a swing.
5. It is a good idea to place your Playcenter in an area that is convenient for adults to watch children at play.
6. Create a site free of obstacles that could cause injuries such as low overhanging tree branches, overhead wires, tree stumps and/or roots, large rocks, bricks and concrete. Additional suggestions in the Suggested Playground Surfacing Section.
7. Do not build your playset on top of surfacing material. 8. Locate bare metal platforms and slides out of direct sunlight to reduce the likelihood of serious burns.
A slide that faces north will receive the least direct sunlight. 9. Separate active and quiet activities from each other. For example, locate sandboxes away from swings
or use a guardrail or barrier to separate the sandbox from the movement of the swings.
Suggested Playground Surfacing
Do not install home playground equipment over concrete, asphalt, packed earth, grass, carpet, or any other hard surface. A fall onto a hard surface can result in serious injury to the equipment user.
Do not install loose fill surfacing over hard surfaces such as concrete or asphalt. Shredded bark mulch, wood chips, fine sand and fine gravel, are added as shock absorbing materials
after assembly. If used properly these materials can absorb some of the impact of a child's fall. All surface material should extend a minimum of 6 feet in all directions around the play area. Do not apply playground surfacing until after the unit is completely constructed. Playset should not be
built on top of surfacing. Use containment, such as digging out around the perimeter and/or lining the perimeter with landscape
edging. Installations of rubber tiles or poured-in-place surfaces (other than loose-fill materials) generally require
a professional and are not "do-it-yourself" projects. Shall use Playground Surfacing Materials (other than loose-fill material) which comply with the safety
standard ASTM F1292 Standard Specification of Impact Attenuation of Surfacing Materials within the Use Zone of Playground Equipment.
Rev01/12/18
6
Owner's Manual Play Set
The following chart explains the fall height in feet from which a life threatening head injury would not be expected
Critical Heights in feet (m) of Tested Materials
Material
Uncompressed Depth
Compressed Depth
Wood Chips Double-Shredded bark mulch
Engineered Wood Fibers Fine Sand
Coarse Sand Fine Gravel Medium Gravel
6" (152mm) 7' (2.13m) 6' (1.83m) 6' (1.83m) 5' (1.52m) 5' (1.52m) 5' (1.52m) 5' (1.52m)
9" (228mm) 12" (304mm) 10' (3.05m) 11' (3.35m) 10' (3.05m) 11' (3.35m) 7' (2.13m) >12' (3.66m) 5' (1.52m) 9' (2.74m) 5' (1.52m) 6' (1.83m) 7' (2.13m) 10' (3.05m) 5' (1.52m) 6' (1.83m)
to 9" (228mm) 10' (3.05m) 7' (2.13m) 6' (1.83m) 5' (1.52m) 4' (1.22m) 6' (1.83m) 5' (1.52m)
Shredded Tires*
10-12' (3.0-3.6m) N/A
N/A
N/A
7KLVGDWDLVIURPWHVWVFRQGXFWHGE\LQGHSHQGHQWWHVWLQJODERUDWRULHVRQDLQFKGHSWKRIXQFRPSUHVVHGVKUHGGHGWLUHVDPSOHVSURGXFHGE\IRXUPDQXIDFWXUHUV7KHWHVWV UHSRUWHGFULWLFDOKHLJKWVZKLFKYDULHGIURPIHHWWRJUHDWHUWKDQIHHW,WLVUHFRPPHQGHGWKDWSHUVRQVVHHNLQJWRLQVWDOOVKUHGGHGWLUHVDVDSURWHFWLYHVXUIDFHUHTXHVWWHVW
GDWDIURPWKHVXSSOLHUVKRZLQJWKHFULWLFDOKHLJKWRIWKHPDWHULDOZKHQLWZDVWHVWHGLQDFFRUGDQFHZLWK$670)
Operating Instructions:
NOTE: Your children's safety is our #1 concern. Observing the following statements and warnings reduces the likelihood of serious or fatal injury. Please review these safety rules regularly with your children.
1. This Playcenter is designed for specific number of occupants whose combined weight should not exceed a designated weight on the elevated floor or the swing area, the total Unit capacity is outlined in the Basic Setup Dimensions section of instruction manual. The maximum fall height and recommended play area is also available in the Basic Setup Dimensions section of the manual for the specific unit.
2. On-site adult supervision is required. 3. Instruct children not to walk close to, in front of, behind, or between moving swings or other
moving playground equipment. 4. Instruct children to sit in and never stand on swings 5. Instruct children not to twist the chains and ropes and not to loop them over the top support
bar, since this may reduce the strength of the chain or rope. 6. Instruct children not to jump from swings or other playground equipment in motion. 7. Instruct children to not to push empty seats. The seat may hit them and cause serious injury. 8. Instruct and teach children to sit in the center of the swings with their full weight on the seats. 9. Instruct children not to use the equipment in a manner other than intended. 10. Instruct children to always go down slides feet first. Never slide head first. 11. Instruct children to look before they slide to make sure no one is at the bottom. 12. Instruct children to never run up a slide, as this increases their chances of falling. 13. The parents should dress children appropriately. (Examples would include the use of well-
fitting shoes and the avoidance of ponchos, scarfs, and other loose-fitting clothing that is potentially hazardous while using equipment). 14. Instruct children not to climb when the equipment is wet. 15. Instruct children to never jump from a fort deck. They should always use the ladder, ramp or slide. 16. Instruct children to never crawl or walk across the top of monkey bars. 17. Instruct children to never crawl on top of a fort roof.
Rev01/12/18
7
Owner's Manual Play Set
Verify that any suspended climbing ropes, chain, or cable are secured at both ends and that they cannot be looped back on it.
Instruct children not to attach items to the playground equipment that are not specifically designed for use with the equipment, such as, but not limited to, jump ropes, clothesline, pet leashes, cables and chain as they may cause a strangulation hazard.
Instruct children to never wrap their legs around swing chain. Instruct children to never slide down the swing chain. Instruct children to remove their bike or other sports helmet before playing on playground
equipment. 1HYHUDGGH[WUDOHQJWKWRFKDLQRUURSH7KHFKDLQVRUURSHVSURYLGHGDUHWKHPD[LPXPOHQJWK
GHVLJQHGIRUWKHVZLQJLQJHOHPHQWV Maintenance Instructions:
At the beginning of each play season:
· Tighten all hardware. · Lubricate all metallic moving parts per manufacturer's instructions. · Check all protective coverings on bolts, pipes, edges, and corners. Replace if they are loose, cracked, or missing. · Check all moving parts including swing seats, ropes, cables, and chains for wear, rust, or other deterioration. Replace as needed. · Check metal parts for rust. If found, sand and repaint using a non Lead-based paint meeting the requirements of 16 CFR 1303. · Check all wood members for deterioration and splinters. Sand down splinters and replace deteriorating wood members. · Reinstall any plastic parts, such as swing seats or any other items that were removed for the cold season. · Rake and check depth of loose fill protective surfacing materials to prevent compaction and to maintain appropriate depth. Replace as necessary.
Twice a month during play season:
· Tighten all hardware. · Check all protective coverings on bolts, pipes, edges, & corners. Replace if they are loose, cracked, or missing. · Rake and check depth of loose fill protective surfacing materials to prevent compaction and to maintain appropriate depth. Replace as necessary. · Once a month during play season. · Lubricate all metallic moving parts per manufacturer's instructions. · Check all moving parts including swing seats, ropes, cables, and chains for wear, rust, or other deterioration. Replace as needed.
At the end of each play season or when the temperature drops below 32° F:
· Remove plastic swing seats and other items as specified by the manufacturer and take indoors or do not use. · Rake and check depth of loose fill protective surfacing materials to prevent compaction and to maintain appropriate depth. Replace as necessary.
Owners shall be responsible for maintaining the legibility of the warning labels.
Rev01/12/18
8
Owner's Manual Play Set
Additional Maintenance: · Check the swing beam and hardware every two weeks due to wood expansion and contraction. It is particularly important that this procedure be followed at the beginning of each season. · Inspect wood parts monthly. The grain of the wood sometimes will lift in the dry season causing splinters to appear. Light sand may be necessary to maintain a safe playing environment. Treat your playset with stain regularly, to help prevent severe checking/splitting and other weather damage. · A waterbourne transparent stain has been applied to your playset. This is done for color only. Once or twice a year, depending on your climate conditions, you must apply some type of protection (sealant) to the wood of your unit. Prior to the application of sealant, lightly sand any "rough" spots on your playset. Please note this is a requirement of your warranty. · Assembling and maintaining the playset on a level location is very important. As your children play, your playset will slowly dig its way into the soil, and it is very important that it settles evenly. Make sure the playset is level and true one each year or at the beginning of each play season.
Disposal Instructions: When the Playcenter use is no longer desired, it should be disassembled and disposed of in such a way that no unreasonable hazards will exist at the time the unit is discarded. Third Party Assembly: Customer may, in their sole discretion, elect to use a third party person or service to assemble this product. Backyard Discovery assumes no responsibility or liability for any charge incurred by the Customer for any assembly services'. Please see our warranty for more information about damaged and missing part replacement coverage. Backyard Discovery will not reimburse Customer for the price of parts purchased.
Rev01/12/18
9
Owner's Manual Play Set
APPENDIX A
Information on Playground Surfacing Materials:
The following information is from the United States Consumer Product Safety Commission's Information Sheet for playground surfacing material; also see the following website for additional information: www.cpsc.gov/cpscpub/pubs/323.html.
X3. SECTION 4 OF THE CONSUMER PRODUCT SAFETY COMMISSION'S OUTDOOR HOME PLAYGROUND SAFETY HANDBOOK9
X3.1 Select Protective Surfacing--One of the most important things you can do to reduce the likelihood of serious head injuries is to install shock-absorbing protective surfacing under and around your play equipment. The protective surfacing should be applied to a depth that is suitable for the equipment height in accordance with ASTM Specification F 1292. There are different types of surfacing to choose from; whichever product you select, follow these guidelines:
X3.1.1 Loose-Fill Materials: X3.1.1.1 Maintain a minimum depth of 9 inches of loose-fill materials such as wood mulch/chips, engineered wood fiber (EWF), or shredded/recycled rubber mulch for equipment up to 8 feet high; and 9 inches of sand or pea gravel for equipment up to 5 feet high. NOTE: An initial fill level of 12 inches will compress to about a 9-inch depth of surfacing overtime. The surfacing will also compact, displace, and settle, and should be periodically refilled to maintain at least a 9-inch depth. X3.1.2 Use a minimum of 6 inches of protective surfacing for play equipment less than 4 feet in height. If maintained properly, this should be adequate. (At depths less than 6 inches, the protective material is too easily displaced or compacted.) NOTE: Do not install home playground equipment over concrete, asphalt, or any other hard surface. A fall onto a hard surface can result in serious injury to the equipment user. Grass and dirt are not considered protective surfacing because wear and environmental factors can reduce their shock absorbing effectiveness. Carpeting and thin mats are generally not adequate protective surfacing. Ground level equipment such as a sandbox, activity wall, playhouse or other equipment that has no elevated play surface does not need any protective surfacing. X3.1.3 Use containment, such as digging out around the perimeter and/or lining the perimeter with landscape edging. Don't forget to account for water drainage. X3.1.3.1 Check and maintain the depth of the loose-fill surfacing material. To maintain the right amount of loose-fill materials, mark the correct level on play equipment support posts. That way you can easily see when to replenish and/or redistribute the surfacing. X3.1.3.2 Do not install loose-fill surfacing over hard surfaces such as concrete or asphalt. X3.1.4 Poured-In-Place Surfaces or Pre-Manufactured Rubber Tiles -- You may be interested in using surfacing other than loose-fill materials like rubber tiles or poured-in-place surfaces. X3.1.4.1 Installations of these surfaces generally require a professional and are not "do-it-yourself" projects. X3.1.4.2 Review surface specification before purchasing this type of surfacing. Ask the installer/manufacturer for a report showing that the product has been tested to the following safety standard: ASTM F 1292 Standard Specification for Impact Attenuation of Surfacing Materials within the Use Zone of Playground Equipment. This report should show the specific height for which the surface is intended to protect against serious head injury. This height should be equal to or greater than the fall height vertical distance between a designated play surface (elevated surface for standing, sitting, or climbing) and the protective surfacing below of your play equipment. X3.1.4.3 Check the protective surfacing frequently for wear. X3.1.5 Placement -- Proper placement and maintenance of protective surfacing is essential. Be sure to: X3.1.5.1 Extend surfacing at least 6 feet from the equipment in all directions. X3.1.5.2 For to-fro swings, extend protective surfacing in front of and behind the swing to a distance equal to twice the height of the top bar from which the swing is suspended.
9 This information has been extracted from the CPSC publications "Playground Surfacing -- Technical Information Guide" and "Handbook for Public Playground Safety." Copies of these reports can be obtained by sending a postcard to the: Office of Public Affairs, U.S. Consumer Product Safety Commission, Washington, D.C., 20207 or call the toll-free hotline: 1-800-638-2772.
The American Society for Testing and Materials takes no position respecting the validity of any parent right asserted in connection with any item mentioned in this standard. Users of this standard are expressly advised that determination of the validity of any such parent rights, and the risk of infringement of such rights, are entirely their own responsibility.
The standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years and if not revised, either approved or withdrawn. Your comments are invited either for revision of this standard or for additional standards and should be addressed to ASTM Headquarters. Your comments will receive careful consideration at a meeting of the responsible technical committee, which you may attend. If you feel that your comments have not received a fair hearing you should make your views known to the ASTM Committee on Standards. 100 Barr Harbor Drive, West Conshohocken, PA 19428.
Rev01/12/18
10
Play Set Assembly Manual FAQs:
1. Does the area for the playset need to be level?
Yes. Backyard Discovery recommends the playset be positioned on a flat level area for maximum safety and durability. The stakes provided should be used to secure it firmly to the ground.
2. What size area is recommended for the playset?
Backyard Discovery recommends at least a 6' (six foot) perimeter around and above the playset for maximum safety.
3. What age range is appropriate for the playsets?
Backyard Discovery playsets are recommended for children ages 3 10 years.
4. Is the wood treated with chemicals?
Backyard Discovery uses 100% Chinese Cedar wood which is naturally bug resistant, decay and rot resistant. To help ensure your child's safety, our wood is completely chemical free and we do not use pressure-treated wood. The stain we use is a top coat using a waterbased product that is for appearance only.
5. How often should the playset be stained?
Backyard Discovery recommends the playset be stained once each year. A water or oil based stain can be used at the customer's discretion.
6. Why does it seem that my swing set is developing cracks?
Wood is a natural material; no two pieces are exactly alike. Each piece has its own characteristics and personality and reacts differently to climate changes. When any wood product is exposed to the elements, it develops "wood checks". A check is the radial separation of the wood fibers running with the grain of the wood. These are caused by the varying temperature and moisture conditions. A check is not a crack it does not affect the strength or durability of the wood or structural integrity of the play set.
7. Do Backyard Discovery playsets come with a warranty?
Yes. All Backyard Discovery products carry a 1-year replacement warranty on all parts for manufacturer's defect. Our wood carries a 5 year warranty on rot and decay as well. Please see warranty details for more information.
8. What is the best way to get started assembling the playset?
Backyard Discovery recommends taking all the parts out of the boxes and arranging them by part number before you begin any assembly. This will not only allow faster assembly, but will also identify any parts that may be missing or damaged so they can be replaced before assembly. If parts are missing or need replacement, go to www.swingsetsonline.com/support.aspx and follow the prompts to order them. Next, read the assembly manual and get the tools ready for the job as recommended in the manual. If the assembly manual is lost or misplaced a new one can be printed from Backyard Discovery's website: www.swingsetsonline.com.
9. The playset seems to rock or sway too much. What's wrong?
Rocking is caused by uneven ground or obstructions such as rocks, roots, etc. under the ground rails. These should be removed and the ground underneath re-leveled to prevent rocking. Also ensure the playset is securely staked to the ground using the stakes provided.
10. The 2"x4" boards do not measure 2"x 4". Why not?
In the U.S. it is common practice to describe lumber dimensions using the rough cut sizes from the sawmill and not the finished dimensions. Retailers, home stores, etc. all use this accepted practice for describing lumber dimensions. However, Backyard Discovery playsets are designed and constructed using the actual dimensions so everything fits properly and remains so during the life of the playset.
11. The end beam is not straight up and down. Why not?
This is normal. Backyard Discovery designs playsets this way to ensure the strongest structure possible. The slight angle adds strength and reduces rocking and twisting.
12. The S-hooks for the swings won't close. What is wrong?
Backyard Discovery recommends placing them on a hard surface such as concrete (don't do this on anything that will dent such as metal or finished wood or glass which will break!). It will take quite a few strokes, but the hooks will close.
11
Tools Required for Installation:
(These are the tools that are generally required for assembly of our outdoor products.
These tools are not included with the outdoor product purchase.)
(Level 24")
(Square)
(Phillips Screw Driver)
(Open End Wrenches 1/2", & 9/16")
(Drill Attachments: Phillips Head)
(Tape Measure)
(Claw Hammer)
(Rubber Mallet - Optional)
(Cordless Drill or Electric Drill)
(1/8", 3/16", 3/8", & 7/16" Drill Bits)
(3/8" Drive Ratchet, 1/2" & 9/16" STD Sockets 1/2" & 9/16" Deep Sockets)
(An Adult w/ an Adult Helper)
(Ladder)
12
Basic Setup Dimensions
Place the set on level ground, not less than 6 ft [2 m] from any structure or obstruction such as a fence, garage, house, overhanging branches, laundry lines, or electrical wires.
33'-11 1/8" [10.3]
21'-11 1/8" [6.7]
6'-0" [1.8]
28'-9 1/8" [8.8]
16'-9 1/8" [5.1]
6'-0"
[1.8]
Safe Play Zone
General Information:
<RXUVHWKDVEHHQGHVLJQHGDQGHQJLQHHUHGIRU FKLOGUHQRQO\DQGIRUUHVLGHQWLDOXVHRQO\ $PD[LPXPRIOEVSHUFKLOGLVUHFRPPHQGHGIRU SOD\DFWLYLWLHVGHVLJQHGIRULQGLYLGXDOXVH $PD[LPXPRIOEVSHUFKLOGLVUHFRPPHQGHGIRU SOD\DFWLYLWLHVGHVLJQHGIRUPXOWLSOHFKLOGXVH $PD[LPXPRIFKLOGUHQLVUHFRPPHQGHGIRUWKLV VZLQJVHW
7'-5 1/2" [2.3]
Important Assembly Notes
12'-4" [3.8]
7'-6 3/16" [2.3]
Safe play height: 18'-4" [5.6 m] Maximum fall height: 7'-6 3/16" [2.3 m]
1) While assembling unit, take time before and after each phase to make sure fort is level. If fort is not level, assembly will be difficult and improper assembly may result. Extra care must be taken to insure the fort is square.
2) Tighten bolts securely, tighten nuts on bolts flush to the tube or member, and place caps over exposed bolts snug to the nut.
3) Pay close attention to the ITEMS NEEDED FOR EACH PHASE. They can be a valuable aid when sorting your wood and hardware. Assembly will be made easier if items are sorted by phase.
4) Pay close attention to make sure you are using the correct hardware in the correct phases. Using incorrect hardware may result in improper assembly.
5) Whenever a T-nut is used, follow these directions. Place T-nut in pre-drilled hole. Tap in with hammer. Place bolt with washers in the opposite side. Hand tighten to make sure the bolt is in the T-nut. DO NOT over tighten.
6) Read the steps of each phase thoroughly. The written steps may include important information not shown in the illustrations.
13
Parts Identification
Wood Components
(NOT TO SCALE)
(1)
A50 - SWING BEAM - W4L04660 3 3/8"x5 1/4"x89 1/2" (86x134x2274)
(1)
B1 - TOWER LEG - W4L04562 3"x3"x89 1/2" (76x76x2274)
(1)
B2 - TOWER LEG - W4L04561 3"x3"x89 1/2" (76x76x2274)
(1)
B3 - TOWER LEG - W4L04564 3"x3"x59" (76x76x1500)
(1)
B4 - TOWER LEG - W4L04568 3"x3"x59" (76x76x1500)
(1)
B5 - BACK LEFT CLUB HOUSE CORNER - W4L04612 3"x3"x53 7/8" (76x76x1370)
(1)
B6 - FRONT LEFT CLUB HOUSE CORNER - W4L04615 3"x3"x53 7/8" (76x76x1370)
(1)
B7 - FRONT RIGHT CLUB HOUSE CORNER - W4L04617 3"x3"x53 7/8" (76x76x1370)
(1)
B8 - BACK RIGHT CLUB HOUSE CORNER - W4L04618 3"x3"x53 7/8" (76x76x1370)
(1)
E1 - TOWER LEG - W4L04563 1 3/8"x3 3/8"x59" (36x86x1500)
(1)
E2 - TOWER LEG - W4L04567 1 3/8"x3 3/8"x59" (36x86x1500)
(2)
E3 - CROWS NEST FLOOR RAIL - W4L11785 1 3/8"x3 3/8"x38" (36x86x964)
(2)
E4 - CROWS NEST DECK BRACE - W4L04662 1 3/8"x3 3/8"x11" (36x86x280)
(8)
E5 - DECK BRACE - W4L11778 1 7/16"x3 3/8"x20" (36x86x508)
14
Parts Identification
Wood Components
(NOT TO SCALE)
(1)
E50 - END SUPPORT - W100949 1 3/8"x3 3/8"x44 1/8" (36x86x1120)
(2)
E51 - ANGLE BRACE - W100948 1 3/8"x3 3/8"x88 3/4" (36x86x2254)
(2)
E74 - MONKEY BAR RAIL - W102918 1 3/8"x3 3/8"x77 1/8" (36x86x1959)
(1)
E77 - LEFT UPRIGHT - W4L11769 1 3/8"x3 3/8"x64 3/8" (36x86x1634)
(1)
E78 - RIGHT UPRIGHT - W4L11768 1 3/8"x3 3/8"x64 3/8" (36x86x1634)
(2)
E79 - MONKEY BAR UPRIGHT - W100995 1 3/8"x3 3/8"x88 1/8" (36x86x2237)
(1)
F1 - TELESCOPE MOUNTING BLOCK - W4L04674 1 3/8"x2 3/8"x3" (36x60x76)
(2)
F3 - CROWS NEST WALL SUPPORT - W4L11779 1 3/8"x2 3/8"x37 1/2" (36x60x952)
(2)
F2 - CROWS NEST WALL SUPPORT - W4L11780 1 3/8"x2 3/8"x37 1/2" (36x60x952)
(1)
G1 - TOP FLOOR RAIL - W4L04566 1"x5 1/4"x80" (24x134x2032)
(1)
G2 - TOP FLOOR RAIL - W4L04569 1"x5 1/4"x80" (24x134x2032)
(1)
G3 - FLOOR RAIL - W4L04571 1"x5 1/4"x60 1/2" (24x134x1537)
(1)
G4 - FLOOR RAIL - W4L04675 1"x5 1/4"x60 1/2" (24x134x1537)
(4)
G5 - BAY WINDOW HEADER - W4L04659 1"x5 1/4"x45 1/4" (24x134x1150)
15
Parts Identification
Wood Components
(NOT TO SCALE)
(1)
G6 - FLOOR RAIL - W4L11777 1"x5 1/4"x60 1/2" (24x134x1537)
(2)
G7 - BOTTOM FLOOR RAIL - W4L11775 1"x5 1/4"x80" (24x134x2032)
(1)
G50 - GROUND BOARD - W100947 1"x5 1/4"x86 3/4" (24x134x2202)
(1)
H1 - WALL RAIL - W4L04620 1"x3 3/8"x80" (24x86x2032)
(1)
H2 - WALL RAIL - W4L04622 1"x3 3/8"x80" (24x86x2032)
(1)
H3 - PICNIC TABLE RAIL - W4L04578 1"x3 3/8"x67 1/4" (24x86x1708)
(2)
H4 - ROOF SUPPORT RAIL - W4L04623 1"x3 3/8"x67 1/4" (24x86x1709)
(1)
H5 - FLOOR RAIL - W4L04608 1"x3 3/8"x60 1/2" (24x86x1537)
(1)
H6 - BACK CLUB HOUSE RAIL - W4L04621 1"x3 3/8"x60 1/2" (24x86x1537)
(1)
H7 - FRONT CLUB HOUSE WALL RAIL - W4L04625 1"x3 3/8"x60 1/2" (24x86x1537)
(1)
H8 - CLUB HOUSE LEG - W4L04637 1"x3 3/8"x50 1/2" (24x86x1284)
(2)
H9 - CLUB HOUSE WALL BOARD - W4L11784 1"x3 3/8"x50 1/2" (24x86x1284)
(1)
H10 - PORCH LEG - W4L04683 1"x3 3/8"x50 1/2" (24x86x1282)
(1)
H11 - PORCH LEG - W4L04610 1"x3 3/8"x50 1/2" (24x86x1282)
16
Parts Identification
Wood Components
(NOT TO SCALE)
(4)
H12 - ROOF RAFTER - W4L04640 1"x3 3/8"x50 3/8" (24x86x1278)
(1)
H13 - CLUB HOUSE WALL RAIL - W4L04624 1"x3 3/8"x50 1/4" (24x86x1277)
(1)
H14 - SWING BEAM MOUNT - W4L04628 1"x3 3/8"x50 1/4" (24x86x1277)
(4)
H15 - PICNIC TABLE SEAT - W4L04600 1"x3 3/8"x35 3/8" (24x86x897)
(1)
H16 - PICNIC TABLE SEAT RAIL - W4L04597 1"x3 3/8"x32" (24x86x812)
(1)
H17 - PICNIC TABLE SEAT RAIL - W4L04599 1"x3 3/8"x32" (24x86x812)
(1)
H18 - CLUB HOUSE WALL RAIL - W4L04616 1"x3 3/8"x29 7/8" (24x86x758)
(1)
H19 - CROWS NEST FLOOR RAIL - W4L04663 1"x3 3/8"x27" (24x86x686)
(4)
H20 - PORCH ROOF RAFTER - W4L04655 1"x3 3/8"x24 1/2" (24x86x622)
(1)
H21 - CROWS NEST FLOOR SUPPORT - W4L04665 1"x3 3/8"x24 1/8" (24x86x614)
(2)
H23 - PICNIC TABLE BRACE - W4L04598 1"x3 3/8"x17 1/2" (24x86x444)
(1)
H24 - PICNIC TABLE TOP SUPPORT - W4L04601 1"x3 3/8"x16 1/2" (24x86x418)
(2)
H25 - TOP FLOOR SUPPORT - W4L04606 1"x3 3/8"x3" (24x86x76)
(3)
H26 - FLOOR JOIST - W4L04573 1"x3 3/8"x60 1/2" (24x86x1537)
17
Parts Identification
Wood Components
(NOT TO SCALE)
(1)
H27 - PICNIC TABLE SUPPORT - W4L04574 1"x3 3/8"x28 5/8" (24x86x728)
(1)
H28 - FRONT WALL RAIL - W4L11774 1"x3 3/8"x60 1/2" (24x86x1537)
(2)
H29 - CROWS NEST WALL RAIL - W4L11783 1"x3 3/8"x30 5/8" (24x86x778)
(2)
H30 - CROWS NEST WALL RAIL - W4L11782 1"x3 3/8"x29 7/8" (24x86x758)
(2)
H31 - CROWS NEST WALL RAIL - W4L11781 1"x3 3/8"x38 7/8" (24x86x988)
(2)
H72 - ROCKWALL RAIL - W4L04677 1"x3 3/8"x61 3/4" (24x86x1570)
(5)
H76 - LADDER RUNG - W4L11770 1"x3 3/8"x18 1/8" (24x86x460)
(1)
H77 - ATTACHMENT BOARD - W4L11766 1"x3 3/8"x20 1/8" (24x86x512)
(2)
H81 - MONKEY BAR BRACE - W100993 1"x3 3/8"x53 1/4" (24x86x1352)
(1)
H82 - MONKEY BAR GROUND BOARD - W100994 1"x3 3/8"x70 3/8" (24x86x1786)
(1)
K2 - FLOOR RAIL - W4L04570 5/8"x5 1/4"x60 1/2" (16x134x1537)
(1)
K3 - FLOOR RAIL - W4L04572 5/8"x5 1/4"x60 1/2" (16x134x1537)
(1)
K5 - CLUB HOUSE WALL RAIL - W4L04626 5/8"x5 1/4"x50 1/4" (16x134x1277)
(2)
K6 - TRIANGLE SUNBURST - W4L04827 5/8"x5 1/4"x10 3/8" (16x134x265)
(9)
L1 - CROWS NEST FLOOR BOARD - W4L04664 5/8"x4 3/8"x27" (16x112x686)
(2)
L2 - SAND BOX SEAT - W4L11776 5/8"x4 3/8"x2148" (16x112x610)
Parts Identification
Wood Components
(NOT TO SCALE)
(1)
M1 - TOP WALL RAIL - W4L04619 5/8"x3 3/8"x80" (16x86x2032)
(2)
M2 - BOTTOM WALL RAIL - W4L04596 5/8"x3 3/8"x80" (16x86x2032)
(1)
M3 - BOTTOM WALL RAIL - W4L04579 5/8"x3 3/8"x60 1/2" (16x86x1537)
(2)
M4 - CROWS NEST WALL RAIL - W4L11773 5/8"x3 3/8"x29 7/8" (16x86x758)
(2)
M5 - GABLE BOARD - W4L04641 5/8"x3 3/8"x59 1/2" (16x86x1510)
(1)
M6 - CLUB HOUSE WALL BOARD - W4L04635 5/8"x3 3/8"x53 7/8" (16x86x1370)
(2)
M7 - GABLE BOARD - W4L04642 5/8"x3 3/8"x52 5/8" (16x86x1338)
(7)
M8 - CLUB HOUSE WALL BOARD - W4L04630 5/8"x3 3/8"x50 1/2" (16x86x1284)
(2)
M9 - CLUB HOUSE WALL BOARD - W4L04631 5/8"x3"x50 1/2" (16x76x1284)
(1)
M10 - CLUB HOUSE WALL RAIL - W4L04614 5/8"x3 3/8"x50 1/4" (16x86x1277)
(1)
M11 - SOFFIT CAP - W4L04653 5/8"x3 3/8"x50 1/4" (16x86x1277)
(1)
M12 - GABLE BOARD - W4L04650 5/8"x3 3/8"x45 7/8" (16x86x1166)
(4)
M13 - PICNIC TABLE TOP - W4L04602 5/8"x3 3/8"x41 1/4" (16x86x1049)
(1)
M14 - GABLE BOARD - W4L04651 5/8"x3 3/8"x39 1/8" (16x86x994)
(1)
M16 - CENTER PICNIC TABLE TOP - W4L04603 5/8"x3"x38 1/4" (16x76x973)
19
Parts Identification
Wood Components
(NOT TO SCALE)
(2)
M17 - FRONT WINDOW WALL BOARD - W4L04639 5/8"x3 3/8"x35" (16x86x889)
(1)
M18 - GABLE BOARD - W4L04652 5/8"x3 3/8"x32 3/8" (16x86x822)
(1)
M19 - FRONT PORCH ROOF SUPPORT - W4L04658 5/8"x3 3/8"x30 5/8" (16x86x779)
(3)
M21 - CLUB HOUSE WALL RAIL - W4L04613 5/8"x3 3/8"x30 1/4" (16x86x768)
(4)
M22 - CLUB HOUSE WALL BOARD - W4L04633 5/8"x3 3/8"x29 7/8" (16x86x758)
(2)
M23 - CLUB HOUSE WALL BOARD - W4L04634 5/8"x3 1/8"x29 7/8" (16x80x758)
(23)
M24 - WALL BOARD - W4L04632 5/8"x3 3/8"x29 7/8" (16x86x758)
(2)
M26 - WALL BOARD - W4L04636 5/8"x3 3/8"x26 1/8" (16x86x664)
(18)
M27 - BOTTOM WALL BOARD - W4L04580 5/8"x3 3/8"x21 3/8" (16x86x544)
(2)
M28 - GABLE WINDOW BOARD - W4L04647 5/8"x3 3/8"x19 1/2" (16x86x496)
(2)
M29 - GABLE WINDOW BOARD - W4L04643 5/8"x3 3/8"x16 1/8" (16x86x410)
(1)
M30 - PICNIC TABLE TOP CLEAT - W4L04604 5/8"x3 3/8"x16" (16x86x406)
(2)
M31 - GABLE WINDOW BOARD - W4L04644 5/8"x3 3/8"x12 3/4" (16x86x324)
20
Parts Identification
Wood Components
(NOT TO SCALE)
(2)
M32 - CROWS NEST WALL RAIL - W4L04671 5/8"x3 3/8"x10" (16x86x254)
(2)
M33 - FRONT WINDOW WALL BOARD - W4L04638 5/8"x3 3/8"x6 3/8" (16x86x162)
(1)
M34 - WALL RAIL - W4L04611 5/8"x3 3/8"x6 3/8" (16x86x162)
(1)
M61 - ATTACHMENT BOARD - W4L04681 5/8"x3 3/8"x22 7/8" (16x86x580)
(1)
M70 - SLIDE BED SUPPORT - W100935 5/8"x3 3/8"x19 7/8" (16x86x505)
(1)
M73 - REAR SUPPORT - W4L11767 5/8"x3 3/8"x20 1/8" (16x86x512)
(10)
M74 - ROCK WALL BOARD - W4L04678 5/8"x3 3/8"x22 7/8" (16x86x580)
(4)
M75 - ROCK WALL BOARD - W4L04829 5/8"x3 3/8"x22 7/8" (16x86x580)
(4)
M76 - ROCK WALL BOARD - W4L04830 5/8"x3 3/8"x22 7/8" (16x86x580)
(2)
N1 - CLUB HOUSE WALL BOARD - W4L04629 5/8"x2 3/8"x50 1/2" (16x60x1284)
(1)
N2 - SOFFIT CAP - W4L04654 5/8"x2 3/8"x50 1/4" (16x60x1277)
(2)
N3 - ROOF SUPPORT - W103535 5/8"x2 3/8"x47" (16x60x1193)
(2)
N4 - CROWS NEST WALL BOARD - W4L04673 5/8"x2 3/8"x19" (16x60x483)
(1)
N5 - FRONT PORCH GABLE TRIM - W4L04656 5/8"x2 3/8"x15" (16x60x381)
(2)
N6 - WINDOW TRIM - W4L04646 5/8"x2 3/8"x12 1/4" (16x60x310)
21
Parts Identification
Wood Components
(NOT TO SCALE)
(2)
N7 - GABLE TRIM - W4L04648 5/8"x2 3/8"x11 1/2" (16x60x292)
(2)
N8 - FRONT PORCH GABLE TRIM - W4L04657 5/8"x2 3/8"x9 1/2" (16x60x241)
(4)
N9 - GABLE TRIM - W4L04649 5/8"x2 3/8"x6 1/2" (16x60x165)
(2)
N10 - GABLE BOARD - W4L04645 5/8"x2 3/8"x27 5/8" (16x60x702)
(18)
O1 - CROWS NEST WALL BOARD - W4L04672 5/8"x1 3/8"x32 1/2" (16x34x825)
(1)
O2 - SAFETY BOARD - W4L04605 5/8"x1 3/8"x28 5/8" (16x34x726)
(1)
SP50 - SWING BEAM SUPPORT - W103545 3 3/8"x3 3/8"x48 3/8" (86x86x1228)
(2)
Y1 - TOP FLOOR BOARD - W4L04609 5/8"x4"x78" (16x102x1980)
(2)
Y2 - BOTTOM FLOOR BOARD - W4L04577 5/8"x4"x35 1/4" (16x102x895)
(1)
Y3 - ROCK WALL END BOARD - W4L04682 5/8"x4"x22 7/8" (16x102x580)
(4)
FP1 - BOTTOM FLOOR PANEL - W2A01485 1 5/8"x13 1/2'x35 3/8" (40x344x897)
(4)
FP2 - FLOOR PANEL - W2A01486 1 1/4"x13 1/2'x81 7/8" (32x344x2080)
22
Parts Identification
Wood Components
(NOT TO SCALE)
(1)
RP1 - LEFT PORCH PEAK ROOF PANEL - W2A02630 1 5/8"x10 1/2"x32 7/8" (42x268x834)
(1) RP2 - LEFT PORCH ROOF PANEL - W2A02628 1 5/8"x15 5/8"x32 7/8" (42x396x834)
(2)
RP3 - PEAK ROOF PANEL - W2A02626 1 5/8"x20 5/8"x59" (42x524x1499)
(1)
RP4 - RIGHT PORCH PEAK ROOF PANEL - W2A02631 1 5/8"x10 1/2"x32 7/8" (42x268x834)
(1)
RP5 - RIGHT PORCH ROOF PANEL - W2A02629 1 5/8"x15 5/8"x32 7/8" (42x396x834)
(4)
RP6 - ROOF PANEL - W2A02627 1 5/8"x15 5/8"x59" (42x396x1499)
(6)
WP1- BAY WINDOW PANEL - W2A01496 7/8"x15 3/4"x20 3/4" (21x400x526)
23
Parts Identification
Hardware
(1) - BOLT WH 5/16X6 - H100023
(2) - BOLT WH 5/16x5 3/4 - H100032
(34) - BOLT WH 5/16x3 3/4 - H100019 (4) - BOLT WH 5/16x3 1/2 - H100018 (3) - BOLT WH 5/16x3 1/4 - H100017
(21) - BOLT WH 5/16x1/2 - H100115 (9) - BOLT WH 5/16x3/4 - H100222 (15) - BOLT WH 5/16x1 - H100008
(6) - BOLT WH 5/16x3 - H100016
(6) - BOLT WH 5/16x1 1/4 - H100009
(10) - BOLT WH 5/16x2 3/4 - H100015
(11) - NUT BARREL WH 5/16x1 1/2 - H100006
(26) - BOLT WH 5/16x1 1/2 - H100010
(6) - BOLT WH 5/16x2 1/2 - H100014
(30) - NUT BARREL WH 5/16x7/8 - H100005
(15) - BOLT WH 5/16x1 3/4 - H100011
(28) - BOLT WH 5/16x2 1/4 - H100013
(1) - NUT BARREL WH 5/16x5/8 - H100004
(9) - BOLT WH 5/16x2 - H100012
24
(4) - SWING HANGER QUICK LINK 86 BOARD - H100098
Parts Identification
Hardware
(2) - T-40 TORX WRENCH - A100041 (2) - T-40 TORX BIT - A100042 (2) - T-30 TORX BIT - H100147 (2) - T-30 TORX WRENCH - H100114
(9) - BOLT HEX 3/8x5-1/2 - H100654 (2) - BOLT HEX 5/16x2-3/4 - H100047 (4) - BOLT HEX 5/16x2 - H100044 (2) - BOLT HEX 5/16x1 3/4 - H100043 (4) - BOLT HEX 5/16x1 1/4 - H100042
(11) - LAG SCREW WH 5/16x1 1/2 - H100026 (48) - LAG SCREW WH 5/16x2 - H100027 (42) - LAG SCREW WH 5/16x2 1/2 - H100028
(2) - LAG SCREW WH 1/4x2 - H100146
(17) - SCREW TAPPING 14x1-1/2 - H100109
(9) - LAG SCREW WH 1/4x1-1/2 - H100145
(1) - SCREW TAPPING 14x2-1/2 - H100082
(26) - BOLT PTH 1/4x3/4 - H100063
(2) - LAG SCREW HEX 5/16x2-1/2 - H100068
(9) - SCREW PWH 8x3/4 - H100070
(9) - LAG SCREW HEX 5/16x1-1/2 - H100066
(33) - SCREW PWH 8x5/8 - H100128 25
(9) - NUT LOCK 5/16 - H100110
Parts Identification
Hardware
(58) - SCREW PFH 8x2 1/2 - H100090 (37) - SCREW PFH 8x2 1/4 - H100091 (88) - SCREW PFH 8x2 - H100111 (4) - SCREW PFH 8x1-3/4" - H100089 (326) - SCREW PFH 8x1-1/2" - H100086 (2) - SCREW PFH 8x1-1/4" - H100087 (401) - SCREW PFH 8x1-1/8" - H100088 (9) - SCREW PFH 8x1 - H100085 (4) - SCREW PPH 4x1/2 WZ - H100360
(206) - WASHER LOCK EXT 8x19 - H100030
(2) - WASHER LOCK EXT 6x15 - H100138
(28) - WASHER LOCK EXT 12x19 - H100031
(22) - WASHER SPLIT 5/16 - H100095
(28) - WASHER LOCK INT 8x15 - H100108
(9) - WASHER LOCK INT 10x18 - H100107
(4) - WASHER SAFETY 17x30 - H100103
(9) - WASHER FLAT 11x25 - H100102
(30) - WASHER FLAT 8x27 - H100105
(11) - WASHER FLAT 9x18 - H100106
(9) - T-NUT 3/8 - H100073
(150) - T-NUT 5/16 - H100074 (26) - T-NUT 1/4 - H100072
(1) - FLANGE CUP WASHER - H100225 26
Parts Identification
Accessories
(NOT TO SCALE)
(1) - GLIDER SEAT DARK GREEN - A100025 (2) - GLIDER ARM LIGHT GREEN - A100021
(2) - SWING SEAT GREEN 26" - A100027
(1) - SLIDE RAIL 10' BOTTOM LEFT GREEN - A100030
(1) - SLIDE RAIL 10' TOP LEFT GREEN - A100032
(1) - SLIDE RAIL 10' TOP RIGHT GREEN - A100033
(1) - SLIDE RAIL 10' BOTTOM RIGHT GREEN - A100031 (6) - GREEN HC ROCK #1 - A6P00036
(6) - GREEN HC ROCK #2 - A6P00037
(1) - SLIDE BED 10' LIGHT GREEN - A100035
(8) - METAL RUNG 559 GREEN - A100045
(4)
- SLIDE SUPPORT TUBE - A100034 21.34 OD x 2.77 W x 505
(1) - BYD ID TAG (LARGE) AGES 3-10 - A100164 27
(1) - VERTICAL ID PLATE - A4M01150
Parts Identification
Accessories
(NOT TO SCALE)
(4) EF - CHAIN GREEN 57" - A100047 (4) HW - CHAIN GREEN 44" - A100048
(2) - HAND GRIP GREEN 816 C/C - A100134
(2) - LADDER RUNG 629 GREEN - A100324 (6) - HAND GRIP METAL GREEN 381 c/c - A100118
(8) FA - QUICK LINK - A100069
(1) SS - "C" REVISION TAG - A100316
(1) - SWING BEAM EXTENSION BRACKET-LEFT - A100325
(1) - SWING BEAM EXTENSION BRACKET-RIGHT - A100326
(2) - TRIANGLE PLATE 100° 5 HOLE - A100294
(2) - WINDOW 216x267 GREEN - A100146
(4) SWING HANGER - A4M00505
(5) - L BRACKET 51x32x82x3.175 - A100396
(8) KC - METAL GROUND STAKE BROWN - A100178
(15) - L BRACKET 2.5x38x50x55 - A100340
(2) - GROUND STAKE REBAR - A4M00527
28
(1) TELESCOPE - A100104
(1)
E77 - LEFT UPRIGHT - W4L11769 1 3/8"x3 3/8"x64 3/8" (36x86x1634)
5 FOOT LADDER ASSEMBLY STEP 1
SCREW PFH 8x2 (10 PLCS)
(5)
H76 - LADDER RUNG - W4L11770 1"x3 3/8"x18 1/8" (24x86x460)
SCREW PFH (10) 8x2
H100111
H76
E77
29
(1)
E78 - RIGHT UPRIGHT - W4L11768 1 3/8"x3 3/8"x64 3/8" (36x86x1634)
5 FOOT LADDER ASSEMBLY STEP 2
SCREW PFH (10) 8x2
H100111
SCREW PFH 8x2 (10 PLCS)
E78
30
(1)
M73 - REAR SUPPORT - W4L11767 5/8"x3 3/8"x20 1/8" (16x86x512)
(1)
H77 - ATTACHMENT BOARD - W4L11766 1"x3 3/8"x20 1/8" (24x86x512)
5 FOOT LADDER ASSEMBLY STEP 3
H77
SCREW PFH (8) 8x2
H100111
SCREW PFH 8x2
M73
(8 PLCS)
31
(2) JV - HAND GRIP GREEN 816 C/C - A100134
5 FOOT LADDER ASSEMBLY STEP 4
BOLT WH (4) 5/16x3 1/2
H100018
(4)
T-NUT 5/16 H100074
JV
BOLT WH 5/16x3 1/2 (4 PLCS)
T-NUT 5/16 (4 PLCS)
32
(4)
M76 - ROCK WALL BOARD - W4L04830 5/8"x3 3/8"x22 7/8" (16x86x580)
ROCK WALL ASSEMBLY STEP 1
(4)
M75 - ROCK WALL BOARD - W4L04829 5/8"x3 3/8"x22 7/8" (16x86x580)
(24)
T-NUT 1/4 H100072
T-NUT 1/4 (24 PLCS)
33
M75 M76
(10)
M74 - ROCK WALL BOARD - W4L04678 5/8"x3 3/8"x22 7/8" (16x86x580)
(4)
M76 - ROCK WALL BOARD - W4L04830 5/8"x3 3/8"x22 7/8" (16x86x580)
(4)
M75 - ROCK WALL BOARD - W4L04829 5/8"x3 3/8"x22 7/8" (16x86x580)
ROCK WALL ASSEMBLY STEP 2
(2)
H72 - ROCKWALL RAIL - W4L04677 1"x3 3/8"x61 3/4" (24x86x1570)
H72
M74 M74
IMPORTANT! T-NUTS TO THE INSIDE
M75 M76
SCREW PFH 8x1-1/2" (72 PLCS)
M74
M75
M74
M76
M74
M75
M74
H72
M76
M74 M75 M74 M76 M74 M74
SCREW PFH (72) 8x1-1/2"
H100086
RECOMMENDED BOARD PLACEMENT PATTERN
34
(1)
Y3 - ROCK WALL END BOARD - W4L04682 5/8"x4"x22 7/8" (16x102x580)
ROCK WALL ASSEMBLY STEP 3
Y3
SCREW PFH 8x1-1/2" (4 PLCS)
SCREW PFH (4) 8x1-1/2"
H100086
5/8
35
1 1/2 in [37 mm]
ROCK WALL ASSEMBLY STEP 4
(1)
M61 - ATTACHMENT BOARD - W4L04681 5/8"x3 3/8"x22 7/8" (16x86x580)
M61
T-NUT 5/16 (2 PLCS)
HOLES CLOSER TO THE BOTTOM OF BOARD
SCREW PFH (4) 8x1-1/2"
H100086
(2)
T-NUT 5/16 H100074
SCREW PFH 8x1-1/2" (4 PLCS)
M61
IMPORTANT! T-NUTS TO THE INSIDE
36
(6) - GREEN HC ROCK #1 - A6P00036
ROCK WALL ASSEMBLY STEP 5
(6) - GREEN HC ROCK #2 - A6P00037
BOLT PTH (24) 1/4x3/4
H100063
WASHER
(24)
LOCK INT 8x15
H100108
BOLT PTH 1/4x3/4 (24 PLCS) WASHER LOCK INT 8x15 (24 PLCS)
NOTE: ARROW ON BACK OF ROCK POINTS UP. RANDOMLY PLACE ALL 12 ROCKS ON ROCK WALL.
37
(2)
E74 - MONKEY BAR RAIL - W102918 1 3/8"x3 3/8"x77 1/8" (36x86x1959)
(4) TZ - L BRACKET 2.5x38x50x55 - A100340 (2) QZ - TRIANGLE PLATE 100° 5 HOLE - A100294
(4) EC - METAL RUNG 559 GREEN - A100045
MONKEY BAR ASSEMBLY STEP 1
SCREW
(8)
TAPPING 14x1-1/2
H100109
(6)
T-NUT 5/16 H100074
NUT LOCK (2) 5/16
H100110
NUT LOCK 5/16 (2 PLCS)
WASHER FLAT 8x27 (2 PLCS)
L BRACKET 2.5x38x50x55 (4 PLCS)
BOLT WH 5/16x2 (2 PLCS)
BOLT WH (6) 5/16x1 1/2
H100010
BOLT WH (2) 5/16x2
H100012
WASHER (2) FLAT 8x27
H100105
TIP: SCREW TAPPING 14x1-1/2 USE A #3 PHILLIPS BIT.
SCREW TAPPING 14x1-1/2 (8 PLCS)
METAL RUNG 559 GREEN (4 PLCS)
E74
NOTE: PILOT HOLES FACE UPWARD
E74
NOTE: FLUSH BRACKETS WITH END OF BOARD.
BOLT WH 5/16x1 1/2 (6 PLCS)
TRIANGLE PLATE 100° 5 HOLE (2 PLCS)
T-NUT 5/16 (6 PLCS)
NOTE: ANGLE CUT OF BOARD.
38
(2)
E79 - MONKEY BAR UPRIGHT - W100995 1 3/8"x3 3/8"x88 1/8" (36x86x2237)
(2) FX - HAND GRIP METAL GREEN 381 c/c - A100118
MONKEY BAR ASSEMBLY STEP 2
(4) EC - METAL RUNG 559 GREEN - A100045
SCREW
(8)
TAPPING 14x1-1/2
H100109
HAND GRIP METAL GREEN 381 c/c (2 PLCS)
LAG SCREW WH 5/16x1 1/2 (4 PLCS)
LAG SCREW (4) WH 5/16x1 1/2
H100026
METAL RUNG 559 GREEN (4 PLCS)
SCREW TAPPING 14x1-1/2 (8 PLCS)
39
(1)
H82 - MONKEY BAR GROUND BOARD - W100994 1"x3 3/8"x70 3/8" (24x86x1786)
(2)
H81 - MONKEY BAR BRACE - W100993 1"x3 3/8"x53 1/4" (24x86x1352)
MONKEY BAR ASSEMBLY STEP 3
T-NUT 5/16 (2 PLCS)
WASHER FLAT 9x18 (2 PLCS)
WASHER LOCK INT 8x15 (2 PLCS)
BOLT HEX 5/16x2-3/4 (2 PLCS)
BOLT HEX (2) 5/16x2-3/4
H100047
LAG SCREW (4) WH 5/16x2
H100027
BOLT WH (4) 5/16x1 1/2
H100010
NUT BARREL (4) WH 5/16x7/8
H100005
(2)
T-NUT 5/16 H100074
WASHER
(4)
LOCK EXT 12x19
H100031
WASHER
(8)
LOCK EXT 8x19
H100030
WASHER
(2)
LOCK INT 8x15
H100108
WASHER (2) FLAT 9x18
H100106
H81
H81
WASHER LOCK EXT 12x19 (4 PLCS)
NUT BARREL WH 5/16x7/8 (4 PLCS)
H82
LAG SCREW WH 5/16x2 (4 PLCS)
BOLT WH 5/16x1 1/2 (4 PLCS) WASHER LOCK EXT 8x19 (8 PLCS)
40
MONKEY BAR ASSEMBLY STEP 4
(4)
T-NUT 5/16 H100074
BOLT WH (4) 5/16x1 1/2
H100010
T-NUT 5/16 (4 PLCS)
BOLT WH 5/16x1 1/2 (4 PLCS)
41
STEP 1
TOP
DX - SLIDE BED 10' LIGHT GREEN - A100035
M70 - SLIDE BED SUPPORT - W100935 5/8"x3 3/8"x19 7/8" (16x86x505)
10 FOOT SLIDE ASSEMBLY
(3)
BOLT WH 5/16x1/2
(3) T-NUT 5/16
(SEE SLIDE ASSEMBLY INSTALLATION STEP FOR DECK MOUNTING HOLE DRILLING LOCATIONS).
DX - SLIDE BED 10' LIGHT GREEN
%2/7:+[ 3/&6
7187 3/&6
0
BOTTOM
USE M70 SLIDE BED SUPPORT AS A TEMPLATE FOR DRILLING BOTTOM HOLE PATTERN IN SLIDE BED. BE SURE TO PLACE SLIDE BRACE UP 1/2" FROM BOTTOM EDGE OF SLIDE BED BEFORE MARKING HOLE PATTERN. USE A 3/8" DRILL BIT TO DRILL HOLE PATTERN.
TIP: PREBENDING THE ENDS WILL EASE ASSEMBLY.
42
DS - SLIDE RAIL 10' BOTTOM RIGHT GREEN - A100031
TR - SLIDE RAIL 10' TOP RIGHT GREEN - A100033
DR - SLIDE RAIL 10' BOTTOM LEFT GREEN - A100030
DT - SLIDE RAIL 10' TOP LEFT GREEN - A100032
10 FOOT SLIDE ASSEMBLY
STEP 2
BUILD 2 SIDE RAILS, MAKING A LEFT AND RIGHT ASSEMBLY.
(8)
BOLT WH 5/16x3/4
WASHER
(8) LOCK EXT
8x19
(8)WNHUT5/B16AxR1R1E/2L
75
WASHER LOCK EXT 8x19 3/&6
BOLT WH 5/16x3/4 3/&6
NUT BARREL WH 5/16x1 1/2 3/&6 '6
43
Using an 1/8" drill bit, Pilot drill all screw dimples along the bottom and end edge of the slide rails.
DW - SLIDE SUPPORT TUBE 21.34x2.77x505 - A100034 21.34 OD x 2.77 W x 505
10 FOOT SLIDE ASSEMBLY
STEP 3
PLACE (1) SLIDE RAIL ASSEMBLY ON A FLAT SURFACE AND BEGIN INSERTING SLIDE BED AT THE BOTTOM OF THE SLIDE RAIL (FIG. 1). HAVE A HELPER BEND THE SLIDE BED TOWARDS THE TOP OF THE SLIDE AND INSERT THE BED INTO THE SLIDE CAVITY. MAKE SURE SLIDE BED IS COMPLETELY DOWN IN THE SLIDE CAVITY.
INSERT THE (4) SLIDE SUPPORT TUBES INTO THEIR RESPECTIVE PILOT LOCATIONS (FIG. 2).
SLIDE BED 10' LIGHT GREEN
DW - SLIDE SUPPORT TUBE 21.34x2.77x505 3/&6
),*
67$57+(5(
),* 44
10 FOOT SLIDE ASSEMBLY
STEP 4
ONCE THE SLIDE BED, SUPPORT TUBES, AND SUPPORT BOARD ARE COMPLETELY IN THE CAVITY AND SUPPORT POCKET, SECURE USING 2-1/2" SCREWS AT EACH OF THE PILOT HOLE LOCATIONS AS SHOWN. REPEAT PROCESS FOR OPPOSITE SLIDE RAIL.
(38)SC8RxE2W1/2PFH
SCREW PFH 8x2 1/2 3/&6
SCREW PFH 8x2 1/2 3/&6
45
(1) DN - GLIDER SEAT DARK GREEN - A100025 (2) DJ - GLIDER ARM LIGHT GREEN - A100021
Light Green & Dark Green Glider
''1
WASHER (2) FLAT 8x27
H100105
NUT LOCK
(2)
5/16
H100110
BOLT WH
(2) 5/16x5 3/4
'-
H100032
NUT LOCK 5/16 (2 PLCS)
WASHER FLAT 8x27 (2 PLCS)
BOLT WH 5/16x5 3/4 (2 PLCS)
46
(4)
G5 - BAY WINDOW HEADER - W4L04659 1"x5 1/4"x45 1/4" (24x134x1150)
BAY WINDOW ASSEMBLY
MAKE 2 WINDOW ASSEMBLIES.
WP1
(6) WP1 - BAY WINDOW PANEL - W2A01496
SCREW PFH 8x1-1/2" (8 PLCS)
G5
SCREW PFH (40) 8x1-1/2"
H100086
SCREW PFH (8) 8x1
H100085
WP1
NOTE: MARK CENTERS ON EACH PART THEN ALIGN PARTS ON MARKS.
SCREW PFH 8x1-1/2" (6 PLCS)
SCREW PFH 8x1 (2 PLCS)
SCREW PFH 8x1-1/2" (6 PLCS)
WP1
SCREW PFH 8x1 (2 PLCS)
47
PORCH ROOF ASSEMBLY STEP 1
(4)
H20 - PORCH ROOF RAFTER - W4L04655 1"x3 3/8"x24 1/2" (24x86x622)
1 1/4 in
1/2 in
USING A 3/16" DRILL BIT, MARK AND DRILL A PILOT HOLE INTO 'H20' RAFTER TO PREVENT SPLITTING.
ONLY DRILL THROUGH ONE RAFTER NOT BOTH.
SCREW PFH (2) 8x2 1/4
H100091
SCREW PFH 8x2 1/4 (2 PLCS)
H20 H20
H20
H20
48
(1)
M19 - FRONT PORCH ROOF SUPPORT - W4L04658 5/8"x3 3/8"x30 5/8" (16x86x779)
(1) HC - BYD ID TAG (LARGE) AGES 3-10 - A100164
PORCH ROOF ASSEMBLY STEP 2
N5
(2)
N8 - FRONT PORCH GABLE TRIM - W4L04657 5/8"x2 3/8"x9 1/2" (16x60x241)
(1)
N5 - FRONT PORCH GABLE TRIM - W4L04656 5/8"x2 3/8"x15" (16x60x381)
SCREW PFH 8x1-1/8" (6 PLCS)
SCREW PFH (6) 8x1-1/8"
H100088
SCREW PWH (4) 8x5/8
H100128
N8 N8
M19
NOTE ENSURE THAT HOLES ARE ALIGNED (BOTH ENDS)
BYD ID TAG (1 PLC)
SCREW PWH 8x5/8 (4 PLCS)
49
(1)
RP1 - LEFT PORCH PEAK ROOF PANEL - W2A02630 1 5/8"x10 1/2"x32 7/8" (42x268x834)
PORCH ROOF ASSEMBLY STEP 3
(1)
RP4 - RIGHT PORCH PEAK ROOF PANEL - W2A02631 1 5/8"x10 1/2"x32 7/8" (42x268x834)
SCREW PFH (8) 8x2
H100111
RP4
RP1
50
SCREW PFH 8x2 (8 PLCS)
(1)
RP2 - LEFT PORCH ROOF PANEL - W2A02628 1 5/8"x15 5/8"x32 7/8" (42x396x834)
PORCH ROOF ASSEMBLY STEP 4
(1)
RP5 - RIGHT PORCH ROOF PANEL - W2A02629 1 5/8"x15 5/8"x32 7/8" (42x396x834)
SCREW PFH (8) 8x2
H100111
RP5
RP2
SCREW PFH 8x2 (8 PLCS)
51
(1)
A50 - SWING BEAM - W4L04660 3 3/8"x5 1/4"x89 1/2" (86x134x2274)
(4) SWING HANGER - A4M00505
(1) - SWING BEAM EXTENSION BRACKET-LEFT - A100325
(1) - SWING BEAM EXTENSION BRACKET-RIGHT - A100326
SWING BEAM ASSEMBLY STEP 1
BOLT HEX (8) 3/8x5-1/2
H100654
BOLT WH (3) 5/16x3
H100016
A50 T-NUT 3/8 (8 PLCS)
NUT BARREL (3) WH 5/16x7/8
H100005
WASHER
(8)
LOCK INT 10x18
H100107
WASHER (8) FLAT 11x25
H100102
(8)
T-NUT 3/8 H100073
BOLT WH 5/16x3 (3 PLCS)
NUT BARREL WH 5/16x7/8 (3 PLCS)
SWING HANGER (4 PLCS)
BOLT HEX 3/8x5-1/2 (8 PLCS)
WASHER FLAT 11x25 (8 PLCS)
WASHER LOCK INT 10x18 (8 PLCS)
NOTE THIS EDGE UPWARD
SWING BEAM EXTENSION BRACKET - LEFT (1 PLCS)
SWING BEAM EXTENSION BRACKET - RIGHT (1 PLCS)
NOTE: DO NOT TIGHTEN BRACKET HARDWARE AT THIS TIME.
52
(1)
G50 - GROUND BOARD - W100947 1"x5 1/4"x86 3/4" (24x134x2202)
(2)
E51 - ANGLE BRACE - W100948 1 3/8"x3 3/8"x88 3/4" (36x86x2254)
SWING BEAM ASSEMBLY STEP 2
BOLT WH 5/16X6 (1 PLC)
WASHER LOCK EXT 8x19 (1 PLC)
SP50
WASHER LOCK EXT 12x19 (1 PLC)
NUT BARREL WH 5/16x7/8 (1 PLC)
NUT BARREL WH 5/16x1 1/2 (2 PLCS)
WASHER LOCK EXT 12x19 (4 PLCS)
NUT BARREL WH 5/16x7/8 (2 PLCS)
E50 E51
(1)
SP50 - SWING BEAM SUPPORT - W103545 3 3/8"x3 3/8"x48 3/8" (86x86x1228)
(1)
E50 - END SUPPORT - W100949 1 3/8"x3 3/8"x44 1/8" (36x86x1120)
BOLT WH (1) 5/16X6
H100023
BOLT WH (2) 5/16x3 3/4
H100019
NUT BARREL (7) WH 5/16x7/8
H100005
BOLT WH (2) 5/16x2 1/2
H100014
BOLT WH (4) 5/16x2
H100012
NUT BARREL (2) WH 5/16x1 1/2
H100006
WASHER
(9)
LOCK EXT 12x19
H100031
WASHER
(9)
LOCK EXT 8x19
H100030
BOLT WH 5/16x2 1/2 (2 PLCS)
WASHER LOCK EXT 8x19 (4 PLCS)
E51
WASHER LOCK EXT 12x19 (4 PLCS)
NUT BARREL WH 5/16x7/8 (4 PLCS)
BOLT WH 5/16x3 3/4 (2 PLCS)
G50
BOLT WH 5/16x2 (4 PLCS) WASHER LOCK EXT 8x19 (4 PLCS)
53
SWING BEAM ASSEMBLY STEP 3
BOLT WH (2) 5/16x3
H100016
NUT BARREL (2) WH 5/16x7/8
H100005
NOTE:
TIGHTEN ALL BRACKET HARDWARE AT THIS TIME.
BOLT WH 5/16x3 (2 PLCS)
NUT BARREL WH 5/16x7/8 (2 PLCS)
54
(2)
E3 - CROWS NEST FLOOR RAIL - W4L11785 1 3/8"x3 3/8"x38" (36x86x964)
CROWS NEST DECK ASSEMBLY STEP 1
(1)
H19 - CROWS NEST FLOOR RAIL - W4L04663 1"x3 3/8"x27" (24x86x686)
SCREW PFH (4) 8x2 1/2
H100090
(4)
T-NUT 5/16 H100074
H19
E3
T-NUT 5/16 (4 PLCS) SCREW PFH 8x2 1/2 (4 PLCS)
55
(2)
E4 - CROWS NEST DECK BRACE - W4L04662 1 3/8"x3 3/8"x11" (36x86x280)
CROWS NEST DECK ASSEMBLY STEP 2
(4) - SWING HANGER QUICK LINK 86 BOARD - H100098
BOLT WH (2) 5/16x2 1/4
H100013
WASHER
(2)
LOCK EXT 8x19
H100030
(2)
T-NUT 5/16 H100074
WASHER
(4)
SAFETY 17x30
H100103
WASHER (4) FLAT 8x27
H100105
NUT LOCK (4) 5/16
H100110
WASHER SAFETY 17x30 (4 PLCS)
SWING HANGER QUICK LINK 86 BOARD (4 PLCS)
NUT LOCK 5/16 (4 PLCS)
WASHER FLAT 8x27 (4 PLCS)
T-NUT 5/16 (2 PLCS)
E4 BOLT WH 5/16x2 1/4 (2 PLCS) WASHER LOCK EXT 8x19 (2 PLCS)
56
(9)
L1 - CROWS NEST FLOOR BOARD - W4L04664 5/8"x4 3/8"x27" (16x112x686)
CROWS NEST DECK ASSEMBLY STEP 3
9 PLCS L1
SCREW PFH 8x1-1/2" (34 PLCS)
SCREW PFH (34) 8x1-1/2"
H100086
FLUSH
1 in
57
(1)
H21 - CROWS NEST FLOOR SUPPORT - W4L04665 1"x3 3/8"x24 1/8" (24x86x614)
CROWS NEST DECK ASSEMBLY STEP 4
SCREW PFH 8x1-1/4" (2 PLCS)
SCREW PFH (2) 8x1-1/4"
H100087
7 1/2 in
11 3/4 in
TIP
MARK LOCATIONS SHOWN.
USING AN 1/8" DRILL BIT
DRILL 2 PILOT HOLES.
H21
20 in
18 1/4 in
TOP VIEW
BOTTOM VIEW
58
(1)
B1 - TOWER LEG - W4L04562 3"x3"x89 1/2" (76x76x2274)
(1)
G7 - BOTTOM FLOOR RAIL - W4L11775 1"x5 1/4"x80" (24x134x2032)
(1) - VERTICAL ID PLATE - A4M01150
FORT ASSEMBLY STEP 1
(1)
E1 - TOWER LEG - W4L04563 1 3/8"x3 3/8"x59" (36x86x1500)
(1)
B3 - TOWER LEG - W4L04564 3"x3"x59" (76x76x1500)
(1)
G1 - TOP FLOOR RAIL - W4L04566 1"x5 1/4"x80" (24x134x2032)
BOLT WH (4) 5/16x2 1/4
H100013
BOLT WH (8) 5/16x3 3/4
H100019
SCREW PPH (4) 4x1/2 WZ
H100360
(12)
T-NUT 5/16 H100074
WASHER
(12)
LOCK EXT 8x19
H100030
PILOT HOLES THIS SIDE
HOLES UP
G1
B1
PILOT HOLES THIS SIDE
VERTICAL ID PLATE SCREW PPH 4x1/2 (4 PLCS)
T-NUT 5/16 (12 PLCS)
WASHER LOCK EXT 8x19 (12 PLCS)
PILOT HOLES E1 THIS SIDE
B3
HOLES UP G7 BOLT WH 5/16x2 1/4 (4 PLCS)
BOLT WH 5/16x3 3/4 (8 PLCS)
(1)
B2 - TOWER LEG - W4L04561 3"x3"x89 1/2" (76x76x2274)
(1)
E2 - TOWER LEG - W4L04567 1 3/8"x3 3/8"x59" (36x86x1500)
(1)
B4 - TOWER LEG - W4L04568 3"x3"x59" (76x76x1500)
FORT ASSEMBLY STEP 2
TOP
(1)
G7 - BOTTOM FLOOR RAIL - W4L11775 1"x5 1/4"x80" (24x134x2032)
(1)
G2 - TOP FLOOR RAIL - W4L04569 1"x5 1/4"x80" (24x134x2032)
BOLT WH (4) 5/16x2 1/4
H100013
BOLT WH (8) 5/16x3 3/4
H100019
(12)
T-NUT 5/16 H100074
WASHER
(12)
LOCK EXT 8x19
H100030
BOLT WH 5/16x2 1/4 (4 PLCS)
PILOT HOLES THIS SIDE
BOLT WH 5/16x3 3/4 (8 PLCS)
WASHER LOCK EXT 8x19 (12 PLCS) G2
T-NUT 5/16 (12 PLCS)
B4
PILOT HOLES THIS SIDE
PILOT HOLES THIS SIDE
E2
B2 HOLES UP
G7
60
(1)
H28 - FRONT WALL RAIL - W4L11774 1"x3 3/8"x60 1/2" (24x86x1537)
(1)
G3 - FLOOR RAIL - W4L04571 1"x5 1/4"x60 1/2" (24x134x1537)
FORT ASSEMBLY STEP 3
(1)
G6 - FLOOR RAIL - W4L11777 1"x5 1/4"x60 1/2" (24x134x1537)
LAG SCREW (8) WH 5/16x2 1/2
H100028
LAG SCREW
(2) WH 5/16x2
WASHER
H100027
(10)
LOCK EXT 8x19
H100030
LAG SCREW WH 5/16x2 (2 PLCS)
WASHER LOCK EXT 8x19 (10 PLCS)
H28
LAG SCREW WH 5/16x2 1/2 (8 PLCS)
G3 NOTE HOLE LOCATIONS
G6
61
(1)
G4 - FLOOR RAIL - W4L04675 1"x5 1/4"x60 1/2" (24x134x1537)
(1)
K2 - FLOOR RAIL - W4L04570 5/8"x5 1/4"x60 1/2" (16x134x1537)
FORT ASSEMBLY STEP 4
LAG SCREW WH 5/16x2 1/2 (4 PLCS)
WASHER LOCK EXT 8x19 (4 PLCS)
WASHER
(8)
LOCK EXT 8x19
H100030
LAG SCREW (4) WH 5/16x2
H100027
LAG SCREW (4) WH 5/16x2 1/2
H100028
LAG SCREW WH 5/16x2 (4 PLCS)
WASHER LOCK EXT 8x19 (4 PLCS)
G4
NOTE HOLE LOCATIONS
K2
62
FORT ASSEMBLY STEP 5
(1)
K3 - FLOOR RAIL - W4L04572 5/8"x5 1/4"x60 1/2" (16x134x1537)
(1)
H26 - FLOOR JOIST - W4L04573 1"x3 3/8"x60 1/2" (24x86x1537)
LAG SCREW (4) WH 5/16x2
H100027
SCREW PFH (4) 8x2 1/2
H100090
WASHER
(4)
LOCK EXT 8x19
H100030
LAG SCREW WH 5/16x2 (4 PLCS)
WASHER LOCK EXT 8x19 (4 PLCS)
NOTE HOLE LOCATIONS
K3
63
H26
FLUSH
SCREW PFH 8x2 1/2 (4 PLCS)
2 5/8 in
1 3/4 in
(2)
L2 - SAND BOX SEAT - W4L11776 5/8"x4 3/8"x24" (16x112x610)
FORT ASSEMBLY STEP 6
1 3/4 in END AT TOP
(1)
H27 - PICNIC TABLE SUPPORT - W4L04574 1"x3 3/8"x28 5/8" (24x86x728)
SCREW PFH (8) 8x1-1/2"
H100086
BOLT WH (1) 5/16x1 1/2
H100010
WASHER
(1)
LOCK EXT 8x19
H100030
(1)
T-NUT 5/16 H100074
H27
WASHER LOCK EXT 8x19 (1 PLC)
BOLT WH 5/16x1 1/2 (1 PLC)
L2
T-NUT 5/16 (1 PLC)
SCREW PFH 8x1-1/2" (8 PLCS)
64
(4)
FP1 - BOTTOM FLOOR PANEL - W2A01485 1 5/8"x13 1/2'x35 3/8" (40x344x897)
FORT ASSEMBLY STEP 7
(2)
Y2 - BOTTOM FLOOR BOARD - W4L04577 5/8"x4"x35 1/4" (16x102x895)
SCREW PFH (38) 8x1-1/2"
H100086
Y2 FP1 4 PLCS
SCREW PFH 8x1-1/2" (38 PLCS)
Y2 SPACE BOARDS & PANELS EVENLY.
65
(1)
M3 - BOTTOM WALL RAIL - W4L04579 5/8"x3 3/8"x60 1/2" (16x86x1537)
FORT ASSEMBLY STEP 8
NOTE ANGLE CUT FACES DOWNWARD
(1)
H3 - PICNIC TABLE RAIL - W4L04578 1"x3 3/8"x67 1/4" (24x86x1708)
LAG SCREW (4) WH 5/16x2 1/2
H100028
LAG SCREW (2) WH 5/16x2
H100027
WASHER
(6)
LOCK EXT 8x19
H100030
H3
LAG SCREW WH 5/16x2 1/2 (4 PLCS) WASHER LOCK EXT 8x19 (4 PLCS)
M3
WASHER LOCK EXT 8x19 (2 PLCS) LAG SCREW WH 5/16x2 (2 PLCS)
66
FORT ASSEMBLY STEP 9
(8)
M27 - BOTTOM WALL BOARD - W4L04580 5/8"x3 3/8"x21 3/8" (16x86x544)
3 in EQUAL SPACING
SCREW PFH (32) 8x1-1/8"
H100088
SCREW PFH 8x1-1/8" (32 PLCS)
M27 8 PLCS
67
FORT ASSEMBLY STEP 10
(2)
M2 - BOTTOM WALL RAIL - W4L04596 5/8"x3 3/8"x80" (16x86x2032)
LAG SCREW (4) WH 5/16x2
H100027
LAG SCREW (2) WH 5/16x1 1/2
H100026
WASHER
(6)
LOCK EXT 8x19
H100030
M2
M2
LAG SCREW WH 5/16x1 1/2 (2 PLCS) LAG SCREW WH 5/16x2 (4 PLCS) WASHER LOCK EXT 8x19 (6 PLCS)
68
FORT ASSEMBLY STEP 11
(10)
M27 - BOTTOM WALL BOARD - W4L04580 5/8"x3 3/8"x21 3/8" (16x86x544)
3 1/8 in EQUAL SPACING
3 1/8 in EQUAL SPACING
SCREW PFH (40) 8x1-1/8"
H100088
SCREW PFH 8x1-1/8" (40 PLCS)
10 PLCS M27
69
(1)
H16 - PICNIC TABLE SEAT RAIL - W4L04597 1"x3 3/8"x32" (24x86x812)
(1)
H23 - PICNIC TABLE BRACE - W4L04598 1"x3 3/8"x17 1/2" (24x86x444)
FORT ASSEMBLY STEP 12
WASHER LOCK EXT 8x19 (2 PLCS)
BOLT WH 5/16x1 3/4 (1 PLC)
H16
H23
LAG SCREW WH 1/4x2 (1 PLC)
WASHER LOCK EXT 6x15 (1 PLC)
LAG SCREW (2) WH 5/16x2 1/2
H100028
BOLT WH (1) 5/16x1 1/2
H100010
LAG SCREW (1) WH 1/4x2
H100146
BOLT WH (1) 5/16x1 3/4
H100011
BOLT WH 5/16x1 1/2 (1 PLC)
M27
WASHER
(1)
LOCK EXT 6x15
H100138
(2)
T-NUT 5/16 H100074
WASHER
(4)
LOCK EXT 8x19
H100030
USING 'H16' AS A GUIDE, DRILL 3/8" DIAMETER HOLE IN 'M27'
T-NUT 5/16 (2 PLCS)
LAG SCREW WH 5/16x2 1/2 (2 PLCS)
WASHER LOCK EXT 8x19 (2 PLCS)
70
FORT ASSEMBLY STEP 13
(1)
H17 - PICNIC TABLE SEAT RAIL - W4L04599 1"x3 3/8"x32" (24x86x812)
(1)
H23 - PICNIC TABLE BRACE - W4L04598 1"x3 3/8"x17 1/2" (24x86x444)
T-NUT 5/16 (2 PLCS)
H17 H23
LAG SCREW (2) WH 5/16x2 1/2
H100028
BOLT WH
(2)
5/16x1 3/4 H100011
(2)
T-NUT 5/16 H100074
LAG SCREW (1) WH 1/4x2
H100146
WASHER
(4)
LOCK EXT 8x19
H100030
WASHER
(1)
LOCK EXT 6x15
H100138
BOLT WH 5/16x1 3/4 (2 PLCS)
LAG SCREW WH 5/16x2 1/2 (2 PLCS)
WASHER LOCK EXT 8x19 (4 PLCS)
WASHER LOCK EXT 6x15 (1 PLC)
LAG SCREW WH 1/4x2 (1 PLC)
71
FORT ASSEMBLY STEP 14
(4)
H15 - PICNIC TABLE SEAT - W4L04600 1"x3 3/8"x35 3/8" (24x86x897)
SCREW PFH (16) 8x2
H100111
SCREW PFH 8x2 (16 PLCS)
H15 4 PLCS
72
FORT ASSEMBLY STEP 15
(1)
H24 - PICNIC TABLE TOP SUPPORT - W4L04601 1"x3 3/8"x16 1/2" (24x86x418)
BOLT WH (1) 5/16x1 3/4
H100011
LAG SCREW (2) WH 5/16x2 1/2
H100028
(1)
T-NUT 5/16 H100074
WASHER
(3)
LOCK EXT 8x19
H100030
T-NUT 5/16 (1 PLC)
WASHER LOCK EXT 8x19 (1 PLC)
BOLT WH 5/16x1 3/4 (1 PLC)
H24
WASHER LOCK EXT 8x19 (2 PLCS) LAG SCREW WH 5/16x2 1/2 (2 PLCS)
73
(1)
M30 - PICNIC TABLE TOP CLEAT - W4L04604 5/8"x3 3/8"x16" (16x86x406)
FORT ASSEMBLY STEP 16
(1)
M16 - CENTER PICNIC TABLE TOP - W4L04603 5/8"x3"x38 1/4" (16x76x973)
(4)
M13 - PICNIC TABLE TOP - W4L04602 5/8"x3 3/8"x41 1/4" (16x86x1049)
SCREW PFH (20) 8x1-1/2"
H100086
SCREW PFH (5) 8x1-1/8"
H100088
SCREW PFH 8x1-1/2" (20 PLCS)
M16
M13 4 PLCS
M30 SCREW PFH 8x1-1/8" (5 PLCS) NOTE: CENTER M30 CLEAT ON BOTTOM OF TABLE TOP BOARDS.
74
FORT ASSEMBLY STEP 17
(2)
H25 - TOP FLOOR SUPPORT - W4L04606 1"x3 3/8"x3" (24x86x76)
FLUSH
2 PLCS H25
SCREW PFH (4) 8x2
H100111
SCREW PFH 8x2 (4 PLCS)
75
TOP
FORT ASSEMBLY STEP 18
12 5/8 in
(1)
O2 - SAFETY BOARD - W4L04605 5/8"x1 3/8"x28 5/8" (16x34x726)
SCREW PFH (3) 8x1-1/8"
H100088
SCREW PFH 8x1-1/8" (3 PLCS)
NOTE HOLE LOCATIONS
TOP
O2 CENTER IN OPENING
76
FORT ASSEMBLY STEP 19
(8)
E5 - DECK BRACE - W4L11778 1 7/16"x3 3/8"x20" (36x86x508)
# $ % & ' ( ) * + #, ## #$ #% #& #' # $ % & ' ( ) * + #, ## #$ #%
$% $$ $# $, #+ #* #) #( #' #& #% #$ ## #, + * ) ( ' & % $ # $$ $# $, #+ #* #) #( #' #& #% #$ ## #, + * ) ( ' & % $ #
8 PLCS
E5 T-NUT 5/16 (8 PLCS)
NOTE ORIENTATION OF T-NUTS
BOLT WH (8) 5/16x2 1/4
H100013
(8)
T-NUT 5/16 H100074
LAG SCREW (8) WH 5/16x2 1/2
H100028
WASHER
(16)
LOCK EXT 8x19
H100030
WASHER LOCK EXT 8x19 (8 PLCS)
BOLT WH 5/16x2 1/4 (8 PLCS)
WASHER LOCK EXT 8x19 (8 PLCS)
LAG SCREW WH 5/16x2 1/2 (8 PLCS)
77
FORT ASSEMBLY STEP 20
(1)
H5 - FLOOR RAIL - W4L04608 1"x3 3/8"x60 1/2" (24x86x1537)
(2)
H26 - FLOOR JOIST - W4L04573 1"x3 3/8"x60 1/2" (24x86x1537)
LAG SCREW (4) WH 5/16x2
H100027
SCREW PFH (8) 8x2 1/2
H100090
WASHER
(4)
LOCK EXT 8x19
H100030
NOTE: FLUSH TOPS OF BOARDS.
ALL PLACES.
SCREW PFH 8x2 1/2
(8 PLCS)
H26
WASHER LOCK EXT 8x19 (4 PLCS)
LAG SCREW WH 5/16x2 (4 PLCS)
H5
H26
78
FP2 - FLOOR PANEL - W2A01486 1 1/4"x13 1/2'x81 7/8" (32x344x2080)
FORT ASSEMBLY STEP 21
Y1
(2)
Y1 - TOP FLOOR BOARD - W4L04609 5/8"x4"x78" (16x102x1980)
T-NUT 5/16 (2 PLCS)
SCREW PFH (94) 8x1-1/2"
H100086
(2)
T-NUT 5/16 H100074
TIP: INSTALL T-NUTS ON BOTTOM SIDE OF BOTH Y1 FLOOR BOARDS BEFORE ATTACHING TO FORT.
NOTE: ENSURE PILOT HOLES ARE CENTERED ON FLOOR JOISTS.
SCREW PFH 8x1-1/2" (94 PLCS)
T-NUT 5/16 (2 PLCS)
Y1
NOTE: T-NUTS THESE HOLES ON BOTTOM SIDE.
FP2 4 PLCS
Y1
79
(1)
B8 - BACK RIGHT CLUB HOUSE CORNER - W4L04618 3"x3"x53 7/8" (76x76x1370)
1 3/4 in 1 1/2 in
(1)
M21 - CLUB HOUSE WALL RAIL - W4L04613 5/8"x3 3/8"x30 1/4" (16x86x768)
(1)
H4 - ROOF SUPPORT RAIL - W4L04623 1"x3 3/8"x67 1/4" (24x86x1709)
L BRACKET (2) 2.5x38x50x55
A100340
FORT ASSEMBLY STEP 22
(1)
B5 - BACK LEFT CLUB HOUSE CORNER - W4L04612 3"x3"x53 7/8" (76x76x1370)
(1)
H6 - BACK CLUB HOUSE RAIL - W4L04621 1"x3 3/8"x60 1/2" (24x86x1537)
BOLT WH (1) 5/16x2 1/2
H100014
BOLT WH (2) 5/16x1/2
H100115
BOLT WH (2) 5/16x3 3/4
H100019
(4)
T-NUT 5/16 H100074
BOLT WH (1) 5/16x3 1/4
H100017
NUT BARREL (2) WH 5/16x7/8
H100005
LAG SCREW (2) WH 5/16x2
H100027
WASHER
WASHER
(2)
LOCK EXT 12x19
(4)
LOCK EXT 8x19
H100031
H100030
H4
T-NUT 5/16 (2 PLCS)
H6
WASHER LOCK EXT 8x19 (2 PLCS)
BOLT WH 5/16x3 3/4 (2 PLCS)
B5
B8
BOLT WH 5/16x3 1/4 (1 PLC)
M21
LAG SCREW WH 5/16x2 (2 PLCS) WASHER LOCK EXT 8x19 (2 PLCS)
BOLT WH 5/16x1/2 (2 PLCS)
NUT BARREL WH 5/16x7/8 (2 PLCS)
WASHER LOCK EXT 12x19 (2 PLCS)
BOLT WH 5/16x2 1/2 (1 PLC)
80
L BRACKET 2.5x38x50x55 (2 PLCS)
1 1/2
1 3/4
(1)
M34 - WALL RAIL - W4L04611 5/8"x3 3/8"x6 3/8" (16x86x162)
FORT ASSEMBLY STEP 23
(1)
M1 - TOP WALL RAIL - W4L04619 5/8"x3 3/8"x80" (16x86x2032)
(1)
M10 - CLUB HOUSE WALL RAIL - W4L04614 5/8"x3 3/8"x50 1/4" (16x86x1277)
LAG SCREW (4) WH 5/16x2
H100027
WASHER
(4)
LOCK EXT 8x19
H100030
WASHER LOCK EXT 8x19 (4 PLCS)
LAG SCREW WH 5/16x2 (4 PLCS)
NOTE HOLE LOCATIONS FOR BOARD ORIENTATION.
M10
M1
M34
81
FORT ASSEMBLY STEP 24
L BRACKET (1) 2.5x38x50x55
A100340
(1)
H18 - CLUB HOUSE WALL RAIL - W4L04616 1"x3 3/8"x29 7/8" (24x86x758)
BOLT WH (1) 5/16x1 3/4
H100011
BOLT WH (1) 5/16x1 1/4
H100009
BOLT WH (1) 5/16x1/2
H100115
NUT BARREL (1) WH 5/16x7/8
H100005
T-NUT 5/16 (2 PLC)
WASHER LOCK EXT 8x19 (1 PLC)
BOLT WH 5/16x1 3/4 (1 PLC)
WASHER
(1)
LOCK EXT 12x19
H100031
(2)
T-NUT 5/16 H100074
WASHER
(1)
LOCK EXT 8x19
H100030
NUT BARREL WH 5/16x7/8 (1 PLC)
WASHER LOCK EXT 12x19 (1 PLC)
L BRACKET 2.5x38x50x55 (1 PLC)
BOLT WH 5/16x1/2 (1 PLC) H18
USING BRACKET AS A GUIDE, DRILL 3/8" HOLE THROUGH DECK
BOLT WH 5/16x1 1/4 (1 PLC)
82
L BRACKET (1) 2.5x38x50x55
A100340
FORT ASSEMBLY STEP 25
BOLT WH (3) 5/16x3 3/4
H100019
(1)
H1 - WALL RAIL - W4L04620 1"x3 3/8"x80" (24x86x2032)
(1)
B6 - FRONT LEFT CLUB HOUSE CORNER - W4L04615 3"x3"x53 7/8" (76x76x1370)
BOLT WH (1) 5/16x3 1/4
H100017
WASHER
(3)
LOCK EXT 8x19
H100030
WASHER
(1)
LOCK EXT 12x19
H100031
NUT BARREL (1) WH 5/16x7/8
H100005
BOLT WH (1) 5/16x1/2
H100115
(4)
T-NUT 5/16 H100074
WASHER LOCK EXT 8x19 (3 PLCS)
BOLT WH 5/16x3 3/4 (3 PLCS)
B6
L BRACKET 2.5x38x50x55 (1 PLC)
WASHER LOCK EXT 12x19 (1 PLC)
NUT BARREL WH 5/16x7/8 (1 PLC)
H1
BOLT WH 5/16x1/2 (1 PLC)
T-NUT 5/16 (3 PLCS)
BOLT WH 5/16x3 1/4 (1 PLC)
T-NUT 5/16 (1 PLC)
83
USING BRACKET AS A GUIDE, DRILL 3/8" HOLE THROUGH DECK
(1)
H2 - WALL RAIL - W4L04622 1"x3 3/8"x80" (24x86x2032)
L BRACKET (1) 2.5x38x50x55
A100340
FORT ASSEMBLY STEP 26
(1)
B7 - FRONT RIGHT CLUB HOUSE CORNER - W4L04617 3"x3"x53 7/8" (76x76x1370)
BOLT WH (3) 5/16x3 3/4
H100019
BOLT WH (1) 5/16x3 1/4
H100017
WASHER
(3)
LOCK EXT 8x19
H100030
WASHER
(1)
LOCK EXT 12x19
H100031
NUT BARREL (1) WH 5/16x7/8
H100005
BOLT WH (1) 5/16x1/2
H100115
(4)
T-NUT 5/16 H100074
T-NUT 5/16 (3 PLCS)
WASHER LOCK EXT 8x19 (3 PLCS)
BOLT WH 5/16x3 3/4 (3 PLCS)
H2
B7
PILOT HOLE THIS SIDE WASHER LOCK EXT 12x19 (1 PLC) NUT BARREL WH 5/16x7/8 (1 PLC)
USING BRACKET AS A GUIDE, DRILL 3/8" HOLE THROUGH DECK
BOLT WH 5/16x1/2 (1 PLC)
L BRACKET 2.5x38x50x55 (1 PLC)
T-NUT 5/16 (1 PLC)
BOLT WH 5/16x3 1/4 (1 PLC)
84
FORT ASSEMBLY STEP 27
L BRACKET (2) 51x32x82x3.175
A100396
(2)
H9 - CLUB HOUSE WALL BOARD - W4L11784 1"x3 3/8"x50 1/2" (24x86x1284)
H9
BOLT HEX
(4) 5/16x2
WASHER
H100044
(2)
LOCK EXT 8x19
H100030
BOLT WH (2) 5/16x1 1/2
H100010
(8)
T-NUT 5/16 H100074
NOTE: HOLES ARE CLOSER TO THE INSIDE
WHEN INSTALLED.
WASHER (4) SPLIT 5/16
H100095
WASHER (4) FLAT 8x27
H100105
H9 T-NUT 5/16 (4 PLCS)
L BRACKET 51x32x82x3.175 (2 PLCS)
WASHER FLAT 8x27 (4 PLCS) WASHER SPLIT 5/16 (4 PLCS)
BOLT HEX 5/16x2 (4 PLCS)
T-NUT 5/16 (2 PLCS) WASHER LOCK EXT 8x19 (2 PLCS)
BOLT WH 5/16x1 1/2 (2 PLCS)
T-NUT 5/16 (2 PLCS)
85
FORT ASSEMBLY STEP 28
(1)
K5 - CLUB HOUSE WALL RAIL - W4L04626 5/8"x5 1/4"x50 1/4" (16x134x1277)
(1)
H14 - SWING BEAM MOUNT - W4L04628 1"x3 3/8"x50 1/4" (24x86x1277)
BOLT WH (2) 5/16x3 3/4
H100019
LAG SCREW (4) WH 5/16x2
H100027
WASHER LOCK EXT 8x19 (6 PLCS)
T-NUT 5/16 (2 PLCS)
SCREW PFH (4) 8x1-3/4"
H100089
BOLT WH (2) 5/16x1 1/2
H100010
LAG SCREW WH 5/16x2 (4 PLCS)
BOLT WH 5/16x1 1/2 (2 PLCS)
K5
WASHER
(8)
LOCK EXT 8x19
H100030
(4)
T-NUT 5/16 H100074
NOTE HOLE
H14
LOCATIONS
WASHER LOCK EXT 8x19 (2 PLCS)
BOLT WH 5/16x3 3/4 (2 PLCS)
T-NUT 5/16 (2 PLCS) SCREW PFH 8x1-3/4" (4 PLCS)
86
FORT ASSEMBLY STEP 29
(1) LADDER ASSEMBLY
BOLT WH (2) 5/16x1 3/4
H100011
WASHER
(2)
LOCK EXT 8x19
H100030
(2)
T-NUT 5/16 H100074
NUT BARREL WH 5/16x7/8 (4 PLCS)
WASHER LOCK EXT 8x19 (4 PLCS)
BOLT WH 5/16x1 3/4 (4 PLCS)
87
FORT ASSEMBLY STEP 30
(1)
H4 - ROOF SUPPORT RAIL - W4L04623 1"x3 3/8"x67 1/4" (24x86x1709)
(1)
H7 - FRONT CLUB HOUSE WALL RAIL - W4L04625 1"x3 3/8"x60 1/2" (24x86x1537)
BOLT WH (4) 5/16x3 3/4
H100019
(4)
T-NUT 5/16 H100074
WASHER
(4)
LOCK EXT 8x19
H100030
BOLT WH 5/16x3 3/4 (4 PLCS)
WASHER LOCK EXT 8x19 (4 PLCS)
T-NUT 5/16 (4 PLCS)
H4
H7
88
1 1/2 in 1 3/4 in
L BRACKET (1) 2.5x38x50x55
A100340
FORT ASSEMBLY STEP 31
(1)
H8 - CLUB HOUSE LEG - W4L04637 1"x3 3/8"x50 1/2" (24x86x1284)
(2)
M21 - CLUB HOUSE WALL RAIL - W4L04613 5/8"x3 3/8"x30 1/4" (16x86x768)
LAG SCREW (2) WH 5/16x2
H100027
BOLT WH (1) 5/16x1 1/2
H100010
BOLT WH (1) 5/16x1 1/4
H100009
BOLT WH (1) 5/16x1/2
H100115
LAG SCREW WH 5/16x2 (1 PLC)
M21
NUT BARREL (1) WH 5/16x7/8
H100005
WASHER
(1)
LOCK EXT 12x19
H100031
WASHER
(3)
LOCK EXT 8x19
H100030
(2)
T-NUT 5/16 H100074
PILOT HOLE
T-NUT 5/16 (1 PLC)
H8
WASHER LOCK EXT 8x19
(2 PLCS)
BOLT WH 5/16x1 1/2 (1 PLC)
BOLT WH 5/16x1/2 (1 PLC)
M21
1-3/4" END
WASHER LOCK EXT 8x19 (1 PLC)
LAG SCREW WH 5/16x2 (1 PLC)
BOLT WH 5/16x1 1/4 (1 PLC)
USING BRACKET AS A GUIDE, DRILL 3/8" HOLE
THROUGH DECK
T-NUT 5/16 (1 PLC)
L BRACKET 2.5x38x50x55 (1 PLC)
89
NOTE: 30 in [762mm] FROM M21 TO EDGE OF FORT.
NUT BARREL WH 5/16x7/8 (1 PLC)
WASHER LOCK EXT 12x19 (1 PLC)
FORT ASSEMBLY STEP 32
(1)
H13 - CLUB HOUSE WALL RAIL - W4L04624 1"x3 3/8"x50 1/4" (24x86x1277)
H13
LAG SCREW (2) WH 5/16x2
H100027
WASHER
(2)
LOCK EXT 8x19
H100030
LAG SCREW WH 5/16x2 (2 PLCS)
WASHER LOCK EXT 8x19 (2 PLCS)
90
L BRACKET (1) 2.5x38x50x55
A100340
FORT ASSEMBLY STEP 33
(1)
H10 - PORCH LEG - W4L04683 1"x3 3/8"x50 1/2" (24x86x1282)
(1)
H11 - PORCH LEG - W4L04610 1"x3 3/8"x50 1/2" (24x86x1282)
NOTE: HOLES GO OUTWARD WHEN INSTALLED.
BOLT WH (2) 5/16x1 3/4
H100011
BOLT WH (1) 5/16x1 1/2
H100010
BOLT WH (2) 5/16x1/2
H100115
NUT BARREL (1) WH 5/16x7/8
H100005
NOTE: HOLES GO OUTWARD.
H10
H11
WASHER LOCK EXT 8x19 (2 PLCS)
BOLT WH 5/16x1 3/4 (2 PLCS)
WASHER
(3)
LOCK EXT 8x19
H100030
WASHER
(1)
LOCK EXT 12x19
H100031
(4)
T-NUT 5/16 H100074
T-NUT 5/16 (2 PLCS)
USING BRACKET AS AS GUIDE, DRILL 3/8" HOLE THROUGH DECK.
NUT BARREL WH 5/16x7/8 (1 PLC)
WASHER LOCK EXT 12x19 (1 PLC)
L BRACKET 2.5x38x50x55 (1 PLC)
BOLT WH 5/16x1/2 (2 PLCS) T-NUT 5/16 (2 PLCS)
91
WASHER LOCK EXT 8x19 (1 PLC)
BOLT WH 5/16x1 1/2 (1 PLC)
(2)
M8 - CLUB HOUSE WALL BOARD - W4L04630 5/8"x3 3/8"x50 1/2" (16x86x1284)
(2)
N1 - CLUB HOUSE WALL BOARD - W4L04629 5/8"x2 3/8"x50 1/2" (16x60x1284)
(2)
M9 - CLUB HOUSE WALL BOARD - W4L04631 5/8"x3"x50 1/2" (16x76x1284)
(2)
(4) M23 - CLUB HOUSE WALL BOARD - W4L04634 5/8"x3 1/8"x29 7/8" (16x80x758)
M22 - CLUB HOUSE WALL BOARD - W4L04633 5/8"x3 3/8"x29 7/8" (16x86x758)
FORT ASSEMBLY STEP 34
SCREW PFH 8x1-1/8" (56 PLCS)
SCREW PFH (56) 8x1-1/8"
H100088
N1 M8 M9
M9 M8 N1
M22
M23 M22
92
(2)
M26 - WALL BOARD - W4L04636 5/8"x3 3/8"x26 1/8" (16x86x664)
(1)
M6 - CLUB HOUSE WALL BOARD - W4L04635 5/8"x3 3/8"x53 7/8" (16x86x1370)
FORT ASSEMBLY STEP 35
SCREW PFH 8x1-1/8" (38 PLCS)
M6
(6)
M24 - WALL BOARD - W4L04632 5/8"x3 3/8"x29 7/8" (16x86x758)
M26
SCREW PFH (38) 8x1-1/8"
H100088
M24
93
(5)
M8 - CLUB HOUSE WALL BOARD - W4L04630 5/8"x3 3/8"x50 1/2" (16x86x1284)
(2)
M17 - FRONT WINDOW WALL BOARD - W4L04639 5/8"x3 3/8"x35" (16x86x889)
FORT ASSEMBLY STEP 36
(2)
M33 - FRONT WINDOW WALL BOARD - W4L04638 5/8"x3 3/8"x6 3/8" (16x86x162)
SCREW PFH (35) 8x1-1/8"
H100088
SCREW PFH 8x1-1/8" (35 PLCS)
M8 M33 M8
M17
94
FORT ASSEMBLY STEP 37
(13)
M24 - WALL BOARD - W4L04632 5/8"x3 3/8"x29 7/8" (16x86x758)
SCREW PFH (52) 8x1-1/8"
H100088
13 PLCS M24
SCREW PFH 8x1-1/8" (52 PLCS)
95
FORT ASSEMBLY STEP 38
(4)
M24 - WALL BOARD - W4L04632 5/8"x3 3/8"x29 7/8" (16x86x758)
SCREW PFH 8x1-1/8" (16 PLCS)
M24
SCREW PFH (16) 8x1-1/8"
H100088
2 5/8 in EQUAL SPACING
96
FORT ASSEMBLY STEP 39
BAY WINDOW ASSEMBLY
(2) BAY WINDOW ASSEMBLY
SCREW PWH 8x5/8 (24 PLCS)
SCREW PFH 8x2 (20 PLCS)
SCREW PFH (20) 8x2
H100111
SCREW PWH (24) 8x5/8
H100128
BAY WINDOW ASSEMBLY
97
FORT ASSEMBLY STEP 40
(1) - WINDOW 216x267 GREEN - A100146
WINDOW 216x267 GREEN (1 PLC)
SCREW PWH 8x3/4 (4 PLCS)
SCREW PWH (4) 8x3/4
H100070
98
FORT ASSEMBLY STEP 41
(2) - LADDER RUNG 629 GREEN - A100324
(2)
T-NUT 5/16 H100074
BOLT WH (4) 5/16x1
H100008
T-NUT 5/16 (2 PLCS)
LADDER RUNG 629 GREEN (2 PLCS)
BOLT WH 5/16x1 (4 PLCS)
99
(4)
H12 - ROOF RAFTER - W4L04640 1"x3 3/8"x50 3/8" (24x86x1278)
FORT ASSEMBLY STEP 42
1 in
H4
USING A 3/16" DRILL BIT, MARK AND DRILL A PILOT HOLE INTO 'H12' RAFTER TO PREVENT SPLITTING.
ONLY DRILL THROUGH ONE RAFTER NOT BOTH.
H12
SCREW PFH 8x2 1/4 (2 PLCS)
H12 H12
BOLT WH (4) 5/16x1 3/4
H100011
SCREW PFH (2) 8x2 1/4
H100091
WASHER
(4)
LOCK EXT 8x19
H100030
(4)
T-NUT 5/16 H100074
H12
H4
T-NUT 5/16 (4 PLCS)
WASHER LOCK EXT 8x19 (4 PLCS)
BOLT WH 5/16x1 3/4 (4 PLCS)
100
(2)
M5 - GABLE BOARD - W4L04641 5/8"x3 3/8"x59 1/2" (16x86x1510)
FORT ASSEMBLY STEP 43
(2)
M7 - GABLE BOARD - W4L04642 5/8"x3 3/8"x52 5/8" (16x86x1338)
SCREW PFH (8) 8x1-1/8"
H100088
SCREW PFH 8x1-1/8" (8 PLCS)
M7 M5
M7
M5
101
(2)
N6 - WINDOW TRIM - W4L04646 5/8"x2 3/8"x12 1/4" (16x60x310)
(1)
N10 - GABLE BOARD - W4L04645 5/8"x2 3/8"x27 5/8" (16x60x702)
(2)
M31 - GABLE WINDOW BOARD - W4L04644 5/8"x3 3/8"x12 3/4" (16x86x324)
(2)
M29 - GABLE WINDOW BOARD - W4L04643 5/8"x3 3/8"x16 1/8" (16x86x410)
(2)
M28 - GABLE WINDOW BOARD - W4L04647 5/8"x3 3/8"x19 1/2" (16x86x496)
FORT ASSEMBLY STEP 44
1 in
1 in 1 3/8 in
SCREW PFH (18) 8x1-1/8"
H100088
6 7/8 in
M31
M29 M28
SCREW PFH 8x1-1/8" (18 PLCS)
N6
N10 M31
M29 M28
102
(1)
N10 - GABLE BOARD - W4L04645 5/8"x2 3/8"x27 5/8" (16x60x702)
(1)
M14 - GABLE BOARD - W4L04651 5/8"x3 3/8"x39 1/8" (16x86x994)
(1)
M18 - GABLE BOARD - W4L04652 5/8"x3 3/8"x32 3/8" (16x86x822)
FORT ASSEMBLY STEP 45
(1)
M12 - GABLE BOARD - W4L04650 5/8"x3 3/8"x45 7/8" (16x86x1166)
NOTE HOLE LOCATIONS
SCREW PFH (8) 8x1-1/8"
H100088
N10 M18 M14 M12
SCREW PFH 8x1-1/8" (8 PLCS)
103
(2)
N7 - GABLE TRIM - W4L04648 5/8"x2 3/8"x11 1/2" (16x60x292)
FORT ASSEMBLY STEP 46
(4)
N9 - GABLE TRIM - W4L04649 5/8"x2 3/8"x6 1/2" (16x60x165)
(2)
K6 - TRIANGLE SUNBURST - W4L04827 5/8"x5 1/4"x10 3/8" (16x134x265)
SCREW PFH (22) 8x1-1/8"
H100088
SCREW PFH 8x1-1/8" (22 PLCS)
N9
1 1/8 in
N7 N9 K6
104
FORT ASSEMBLY STEP 47
(1) - WINDOW 216x267 GREEN - A100146
SCREW PWH (4) 8x3/4
H100070
SCREW PWH 8x3/4 (4 PLCS)
WINDOW 216x267 GREEN (1 PLC)
105
FORT ASSEMBLY STEP 48
(1)
M11 - SOFFIT CAP - W4L04653 5/8"x3 3/8"x50 1/4" (16x86x1277)
(1)
N2 - SOFFIT CAP - W4L04654 5/8"x2 3/8"x50 1/4" (16x60x1277)
SCREW PFH (6) 8x1-1/2"
H100086
N2
SCREW PFH 8x1-1/2"
(6 PLCS)
M11
106
(1) RP3 - PEAK ROOF PANEL - W2A02626 1 5/8"x20 5/8"x59" (42x524x1499)
FORT ASSEMBLY STEP 49
(2)
RP6 - ROOF PANEL - W2A02627 1 5/8"x15 5/8"x59" (42x396x1499)
SCREW PFH (14) 8x2 1/4
H100091
RP3 RP6
NOTE: START WITH TOP PANEL FIRST.
FLUSH EDGES.
SCREW PFH 8x2 1/4 (14 PLCS)
107
FORT ASSEMBLY STEP 50
TOP 2 1/2
(1)
N3 - ROOF SUPPORT - W103535 5/8"x2 3/8"x47" (16x60x1193)
25 7/8 1 in
SCREW PFH (9) 8x1-1/8"
H100088
SCREW PFH 8x1-1/8"
N3
(9 PLCS)
108
FORT ASSEMBLY STEP 51
REPEAT STEPS 48 & 49 TO ATTACH LEFT SIDE ROOF PANELS.
109
FORT ASSEMBLY STEP 52
(1) PORCH ROOF ASSEMBLY
BOLT WH (1) 5/16x2 3/4
H100015
BOLT WH (1) 5/16x1 3/4
H100011
BOLT WH (2) 5/16x2 1/2
H100014
(4)
T-NUT 5/16 H100074
WASHER
(4)
LOCK EXT 8x19
H100030
PORCH ROOF ASSEMBLY
T-NUT 5/16 (2 PLCS)
WASHER LOCK EXT 8x19 (2 PLCS)
BOLT WH 5/16x2 1/2 (2 PLCS)
T-NUT 5/16 (2 PLCS)
BOLT WH 5/16x1 3/4 (1 PLC)
BOLT WH 5/16x2 3/4 (1 PLC) WASHER LOCK EXT 8x19 (2 PLCS)
110
FORT ASSEMBLY STEP 53
T-NUT 5/16 (2 PLCS)
L BRACKET (1) 51x32x82x3.175
A100396
(1) SWING BEAM ASSEMBLY
L BRACKET 51x32x82x3.175 (1 PLC)
USING BRACKET AS A GUIDE, DRILL 3/8" HOLES
SWING BEAM ASSEMBLY
LAG SCREW
(2)
HEX 5/16x2-1/2
H100068
BOLT HEX (2) 5/16x1 3/4
H100043
(2)
T-NUT 5/16 H100074
WASHER (4) SPLIT 5/16
H100095
WASHER (4) FLAT 8x27
H100105
LAG SCREW HEX 5/16x2-1/2 (2 PLCS)
BOLT HEX 5/16x1 3/4 (2 PLCS)
WASHER SPLIT 5/16 (4 PLCS)
WASHER FLAT 8x27 (4 PLCS)
111
FORT ASSEMBLY STEP 54
(1) CROW'S NEST DECK ASSEMBLY
LAG SCREW (2) WH 5/16x2 1/2
H100028
NUT BARREL (4) WH 5/16x7/8
H100005
BOLT HEX (4) 5/16x1 1/4
H100042
SCREW PFH (2) 8x1-1/2"
H100086
WASHER (4) FLAT 8x27
H100105
WASHER (4) SPLIT 5/16
H100095
WASHER
(2)
LOCK EXT 8x19
H100030
WASHER
(4)
LOCK EXT 12x19
H100031
WASHER SPLIT 5/16 (4 PLCS)
BOLT HEX 5/16x1 1/4 (4 PLCS)
WASHER FLAT 8x27 (4 PLCS)
SCREW PFH 8x1-1/2" (2 PLCS)
WASHER LOCK EXT 12x19 (4 PLCS)
NUT BARREL WH 5/16x7/8 (4 PLCS)
CROW'S NEST DECK ASSEMBLY
LAG SCREW WH 5/16x2 1/2 (2 PLCS)
WASHER LOCK EXT 8x19 (2 PLCS)
112
FORT ASSEMBLY STEP 55
L BRACKET (2) 51x32x82x3.175
A100396
LAG SCREW
(8)
HEX 5/16x1-1/2
H100066
WASHER (8) SPLIT 5/16
H100095
LAG SCREW HEX 5/16x1-1/2 (8 PLCS)
WASHER SPLIT 5/16 (8 PLCS)
WASHER FLAT 8x27 (8 PLCS)
WASHER (8) FLAT 8x27
H100105
L BRACKET 51x32x82x3.175 (2 PLCS)
113
(2)
F3 - CROWS NEST WALL SUPPORT - W4L11779 1 3/8"x2 3/8"x37 1/2" (36x60x952)
FORT ASSEMBLY STEP 56
F2
F3
(2)
F2 - CROWS NEST WALL SUPPORT - W4L11780 1 3/8"x2 3/8"x37 1/2" (36x60x952)
BOLT WH (8) 5/16x2 3/4
H100015
(4)
T-NUT 5/16 H100074
WASHER
(8)
LOCK EXT 8x19
H100030
NOTE HOLE ORIENTATIONS
F2
T-NUT 5/16 (4 PLCS)
F3
WASHER LOCK EXT 8x19 (8 PLCS)
BOLT WH 5/16x2 3/4 (8 PLCS)
114
(2)
H31 - CROWS NEST WALL RAIL - W4L11781 1"x3 3/8"x38 7/8" (24x86x988)
FORT ASSEMBLY STEP 57
(1)
H30 - CROWS NEST WALL RAIL - W4L11782 1"x3 3/8"x29 7/8" (24x86x758)
LAG SCREW (4) WH 5/16x2 1/2
H100028
BOLT WH (4) 5/16x2 1/4
H100013
(4)
T-NUT 5/16 H100074
WASHER
(8)
LOCK EXT 8x19
H100030
H31
T-NUT 5/16
H31
(4 PLCS)
BOLT WH 5/16x2 1/4 (4 PLCS)
WASHER LOCK EXT 8x19 (8 PLCS)
LAG SCREW WH 5/16x2 1/2 (4 PLCS)
H30
115
FORT ASSEMBLY STEP 58
L BRACKET (2) 2.5x38x50x55
A100340
BOLT WH 5/16x1 (2 PLCS)
L BRACKET 2.5x38x50x55 (2 PLCS)
T-NUT 5/16 (4 PLCS)
BOLT WH (2) 5/16x1
H100008
BOLT WH (2) 5/16x1/2
H100115
(4)
T-NUT 5/16 H100074
BOLT WH 5/16x1/2 (2 PLCS)
USING BRACKETS AS A GUIDE, DRILL 3/8" HOLES THROUGH WALL BOARD.
116
(2)
M4 - CROWS NEST WALL RAIL - W4L11773 5/8"x3 3/8"x29 7/8" (16x86x758)
(1)
H30 - CROWS NEST WALL RAIL - W4L11782 1"x3 3/8"x29 7/8" (24x86x758)
(2)
H29 - CROWS NEST WALL RAIL - W4L11783 1"x3 3/8"x30 5/8" (24x86x778)
FORT ASSEMBLY STEP 59
BOLT WH (4) 5/16x2 1/4
H100013
LAG SCREW (4) WH 5/16x2 1/2
H100028
LAG SCREW (8) WH 5/16x2
H100027
WASHER
(16)
LOCK EXT 8x19
H100030
(4)
T-NUT 5/16 H100074
LAG SCREW WH 5/16x2
M4
(8 PLCS)
T-NUT 5/16 (4 PLCS)
H29 BOLT WH 5/16x2 1/4 (4 PLCS)
WASHER LOCK EXT 8x19 (16 PLCS)
LAG SCREW WH 5/16x2 1/2 (4 PLCS)
H30 H29
117
1 1/8
1 3/4
(2)
M32 - CROWS NEST WALL RAIL - W4L04671 5/8"x3 3/8"x10" (16x86x254)
FORT ASSEMBLY STEP 60
USING BRACKETS AS A GUIDE,
DRILL 3/8" HOLES THROUGH WALL
L BRACKET (2) 2.5x38x50x55
A100340
M32
BOLT WH (2) 5/16x2
H100012
BOLT WH (2) 5/16x1 1/4
H100009
BOLT WH (2) 5/16x1/2
H100115
(6)
T-NUT 5/16 H100074
WASHER
(2)
LOCK EXT 8x19
H100030
BOLT WH 5/16x1/2 (2 PLCS)
L BRACKET 2.5x38x50x55 (2 PLCS)
BOLT WH 5/16x1 1/4 (2 PLCS)
T-NUT 5/16 (6 PLCS)
WASHER LOCK EXT 8x19 (2 PLCS)
BOLT WH 5/16x2 (2 PLCS)
118
FORT ASSEMBLY STEP 61
(2)
N4 - CROWS NEST WALL BOARD - W4L04673 5/8"x2 3/8"x19" (16x60x483)
SCREW PFH (4) 8x1-1/8"
H100088
SCREW PFH 8x1-1/8" (4 PLCS) 3 in
N4
119
FORT ASSEMBLY STEP 62
(6)
O1 - CROWS NEST WALL BOARD - W4L04672 5/8"x1 3/8"x32 1/2" (16x34x825)
2 3/4 in EQUAL SPACING
SCREW PFH (12) 8x1-1/8"
H100088
O1 6 PLCS
SCREW PFH 8x1-1/8" (12 PLCS)
120
FORT ASSEMBLY STEP 63
(12)
O1 - CROWS NEST WALL BOARD - W4L04672 5/8"x1 3/8"x32 1/2" (16x34x825)
2 1/2 in EQUAL SPACING
SCREW PFH (24) 8x1-1/8"
H100088
O1 12 PLCS
SCREW PFH 8x1-1/8" (24 PLCS
121
(1) TELESCOPE - A100104
FORT ASSEMBLY STEP 64
(1)
F1 - TELESCOPE MOUNTING BLOCK - W4L04674 1 3/8"x2 3/8"x3" (36x60x76)
SCREW
(1)
TAPPING 14x2-1/2
H100082
FLANGE CUP (1) WASHER
H100225
SCREW PFH (2) 8x2 1/4
H100091
TELESCOPE
SCREW TAPPING 14x2-1/2 (1 PLCS)
FLANGE CUP WASHER (1 PLCS)
F1 SCREW PFH 8x2 1/4 (2 PLCS)
122
FORT ASSEMBLY STEP 65
(4) - HAND GRIP METAL GREEN 381 c/c - A100118
LAG SCREW (4) WH 5/16x1 1/2
H100026
BOLT WH (4) 5/16x1
H100008
(4)
T-NUT 5/16 H100074
LAG SCREW WH 5/16x1 1/2 (4 PLCS)
T-NUT 5/16 (4 PLCS)
HAND GRIP METAL GREEN 381 c/c (4 PLCS)
BOLT WH 5/16x1 (4 PLCS)
123
FINAL ASSEMBLY STEP 1
(1) ROCK WALL ASSEMBLY
M
BOLT WH (2) 5/16x1 1/2
H100010
WASHER
(2)
LOCK EXT 8x19
H100030
WASHER LOCK EXT 8x19 (2 PLCS)
BOLT WH 5/16x1 1/2 (2 PLCS)
ROCK WALL ASSEMBLY
124
FINAL ASSEMBLY STEP 2
(1) MONKEY BAR ASSEMBLY
T-NUT 5/16 (4 PLCS)
(4)
T-NUT 5/16 H100074
BOLT WH (4) 5/16x1
H100008
BOLT WH 5/16x1 (4 PLCS)
MONKEY BAR ASSEMBLY
125
(1) SLIDE
FINAL ASSEMBLY STEP 3
NOTE: CENTER SLIDE IN OPENING. USING DIMENSIONS BELOW AS A TEMPLATE, DRILL (3) 3/8" HOLES THROUGH DECK FOR HARDWARE.
6 1/2 in
6 1/2 in
2 5/8 in
6 1/4 in 1 in
BOLT WH 5/16x1/2 (3 PLCS)
BOLT WH (3) 5/16x1/2
H100115
(3)
T-NUT 5/16 H100074
T-NUT 5/16 (3 PLCS) UNDER FLOOR
126
FINAL ASSEMBLY STEP 4
(1) SS - "C" REVISION TAG - A100316
SCREW PWH (2) 8x5/8
H100128
"C" REVISION TAG (1 PLC)
SCREW PWH 8x5/8 (2 PLCS)
127
(8) FA - QUICK LINK - A100069
(2) DP - SWING SEAT GREEN - A100027
(4) HW - CHAIN GREEN 44" - A100048
(4) EF - CHAIN GREEN 57" - A100047
FINAL ASSEMBLY STEP 5
(1) GLIDER
TIGHTEN QUICK LINK
CHAIN GREEN 44" (4 PLCS)
INSERT CHAIN INTO QUICK LINK
CHAIN GREEN 57" (4 PLCS)
QUICK LINK (8 PLCS)
GLIDER
SWING SEAT GREEN (2 PLCS)
128
(8) KC - METAL GROUND STAKE BROWN - A100178
(2) - GROUND STAKE REBAR - A4M00527
FINAL ASSEMBLY STEP 6
DETAIL "A" & "B" TWIST STAKES INTO GROUND AGAINST GROUND BOARDS AND CORNER POSTS IN LOCATIONS SHOWN. USING STAKE AS A TEMPLATE, DRILL A 3/16" HOLE FOR LAGS.
LAG SCREW
(8) WH 1/4x1-1/2
WASHER
H100145
(8) FLAT 9x18
H100106
(1)
BOLT WH 5/16x1/2 H100115 (2)
WASHER LOCK EXT 12x19
H100031
DETAIL "C" DRIVE STAKE INTO GROUND AT LOCATIONS SHOWN. USING STAKE AS A TEMPLATE, DRILL A 7/16" HOLE FOR HARDWARE.
DETAIL "D" DRIVE STAKE INTO GROUND AT LOCATIONS SHOWN. USING STAKE AS A TEMPLATE, DRILL A 7/16" HOLE FOR HARDWARE.
BOLT WH (1) 5/16x1 1/4
H100009
NUT BARREL (1) WH 5/16x5/8
H100004
NUT BARREL (1) WH 5/16x7/8
H100005
LAG SCREW WH 1/4x1-1/2 (4 PLCS)
WASHER FLAT 9x18 (4 PLCS)
GROUND STAKE (DETAIL 'B')
GROUND STAKE (DETAIL 'B')
LAG SCREW WH 1/4x1-1/2 (4 PLCS)
METAL GROUND STAKE BROWN (4 PLCS)
DETAIL 'A'
GROUND STAKE (DETAIL 'A')
DETAIL 'B'
WASHER FLAT 9x18 (4 PLCS)
METAL GROUND STAKE BROWN (4 PLCS)
GROUND STAKE (DETAIL 'A')
GROUND STAKE (DETAIL 'C')
NUT BARREL WH 5/16x7/8 (1 PLCS)
WASHER LOCK EXT 12x19 (1 PLCS)
GROUND STAKE (DETAIL 'A')
BOLT WH 5/16x1/2 (1 PLCS)
GROUND STAKE REBAR (1 PLCS)
DETAIL "C"
FINAL STEP
DOUBLE CHECK EVERY BOLT, SCREW AND NUT FOR TIGHTNESS. MAKE SURE EVERY BOARD IS SECURE AND MAKE SURE THE PLAY SET IS LEVEL.
ENJOY YOUR NEW PLAY SET! NOTE:
FAILURE TO ATTACH GROUND STAKES COULD CAUSE INJURY AND WILL VOID WARRANTY!
GROUND STAKE (DETAIL 'B')
129
GROUND STAKE (DETAIL 'D')
GROUND STAKE (DETAIL 'A')
BOLT WH 5/16x1 1/4 (1 PLCS)
NUT BARREL WH 5/16x5/8 (1 PLCS)
WASHER LOCK EXT 12x19 (1 PLCS)
GROUND STAKE REBAR (1 PLCS)
DETAIL 'D'
GROUND STAKE (DETAIL 'B')
Limited Warranty
This Limited Warranty by Backyard Discovery applies to products manufactured under the Backyard Discovery brand or its other brands including but not limited to Backyard Botanical, Adventure Playsets, and Leisure Time Products.
Backyard Discovery warrants that this product is free from defect in materials and workmanship for a period of one (1) year from the original date of purchase. This one (1) year warranty covers all parts including wood, hardware, and accessories. All wood carries a five (5) year pro-rated warranty against rot and decay. Refer to the schedule below for charges associated with replacement of parts under this Limited Warranty. In addition, Backyard Discovery will replace any parts within the first 30 days from date of purchase found to be missing from or damaged in the original packaging.
This warranty applies to the original owner and registrant and is non-transferable. Regular maintenance is required to assure maximum life and performance of this product and failure by the owner to maintain the product according to the maintenance requirements may void this warranty. Maintenance guidelines are provided in the Owner's Manual.
This Limited Warranty does not cover:
· Labor for any inspection · Labor for replacement of any defective item(s) · Incidental or consequential damages · Cosmetic defects which do not affect performance or integrity of a part or the entire product · Vandalism, improper use, failure due to loading or use beyond the capacities stated in the applicable
Assembly Manual. · Acts of nature including but not limited to wind, storms, hail, floods, excessive water exposure · Improper installation including but not limited to installation on uneven, unlevel, or soft ground · Minor twisting, warping, checking, or any other natural occurring properties of wood that do not affect
performance or integrity
Backyard Discovery products have been designed for safety and quality. Any modifications made to the original product could damage the structural integrity of the unit leading to failure and possible injury. Modification voids any and all warranties and Backyard Discovery assumes no liability for any modified products or consequences resulting from failure of a modified product.
This product is warranted for RESIDENTIAL USE ONLY. Under no circumstance should a Backyard Discovery product be used in public settings. Such use may lead to product failure and potential injury. Any and all public use will void this warranty. Backyard Discovery disclaims all other representations and warranties of any kind, express or implied.
This Warranty gives you specific legal rights. You may have other rights as well which vary from state to state or province to province. This warranty excludes all consequential damages, however, some states do not allow the limitation or exclusion of consequential damages and therefore this limitation may not apply to you.
Pro Rated Part Replacement Schedule
Product Age All Parts 0-30 days from date of purchase 31 days to 1 year
Wood Rot and Decay Only 1 year 2 years 3 years 4 years 5 years Over 5 years
Customer Pays
$0 and free shipping $0 + S&H
$0 and free shipping 20% + S&H 40% + S&H 60% + S&H 80% + S&H 100% + S&H
Rev5/20/10 BRS
130
NOTES:
131
NOTES:
132
Acrobat Distiller 21.0 (Windows)