Datasheet for Tektronix models including: USB4 Transmitter, USB4 Compliance, USB4 Debug Solution, USB4 Transmitter Compliance and Debug Solution
Opt. USB4 Application Datasheet. The Tektronix USB41 Compliance and Debug solutions provide an easy way to validate and characterize the emerging USB4™ Router-Host...
Jun 16, 2021 — Key features. • Tektronix USB4 Compliance and Debug solution provide a comprehensive toolset for the USB4™ Gen2 (10 Gbps) and Gen3.
The Tektronix USB41 Compliance and Debug solutions provide an easy way to validate and characterize the emerging USB4™ Router-Host, USB4™ Router-Device, and USB4™ Hubs as per the
USB4TM Transmitter, Compliance, and Debug Solution Opt. USB4 Application Datasheet The Tektronix USB41 Compliance and Debug solutions provide an easy way to validate and characterize the emerging USB4TM Router-Host, USB4TM Router-Device, and USB4TM Hubs as per the USB4TM Electrical Compliance Test Specification v1.0. Tektronix DPO/ MSO70000SX/DX Series Oscilloscope (bandwidth 23 GHz) supports the Tektronix USB4 Compliance and Debug solutions. · The TekExpress USB4 Signal Validation feature validates the compliance pattern to ensure the accuracy of the results. · The TekExpress USB4 Pre-Recorded Mode supports the offline analysis and baseline for future specification changes. · The TekExpress USB4 Automatic DUT Control mode captures all the compliance test patterns. So the USB4 Transmitter testing completes without user intervention. · Tektronix USB4 Automatic DUT Control supports both USB4 Discrete and Integrated (SoC) products. · Complete both Lane 0 and Lane 1 Transmitter test without flipping the USB Type-C® connector or USB4 High-Speed fixture. · Quickly validate test results with comprehensive reporting that details test margins, pass/fail results, and plots in PDF, MHT, and CSV formats. Tektronix USB4 Transmitter Compliance Solution Key features · Tektronix USB4 Compliance and Debug solution provide a comprehensive toolset for the USB4TM Gen2 (10 Gbps) and Gen3 (20 Gbps) verification, characterization, debug, and compliance testing. · Tektronix USB4 solution2 is compliant with the USB4TM Specification Ver1.0 and USB4TM Router Assembly Electrical Compliance Test Specification Rev 1.0. · Tektronix DPOJET-USB4 Plug-in solution with setup files and MOI assists the root cause analysis. · Tektronix USB4 solution supports the SigTest (USB-IF Analysis Tool). · Tektronix USB4 solution supports the Wilder Technologies USB4 Controller and USB4 Electrical Test Tool (ETT). · Tektronix Serial Data Link Analysis (SDLA) tool supports the Deembedding, Embedding, Equalization (CTLE+DFE), and Custom Channel Characterization. Tektronix USB4 debug solution Applications USB transmitter testing · USB4 Silicon Testing: Host, Device, and Hub · USB4 Peripheral Testing: Host, Device, and Hub · Manufacturing testing 1 USB Type-C®, and USB4TM are trademarks of the Universal Serial Bus Implementers Forum (USB-IF) 2 USB-IF approved the Tektronix oscilloscopes (SX and DX series) for the USB4 testing. Approval for the automation software is pending. www.tek.com 1 USB4 Transmitter Compliance and Debug Solution Datasheet Tektronix USB4 Transmitter connection diagram Required test procedures (MOI) can be found at: www.tek.com/usb Tektronix USB4 Tansmitter Compliance Report in MHT format USB4 Gen3 (20 Gbps) TP2 Eye diagram USB4 Gen3 (20 Gbps) TP3 Eye diagram with Equalization (CTLE and DFE) USB4 Gen3 (20Gbps) TP2 TJ Bathtub USB4 Gen3 (20Gbps) TP3 TJ Bathtub www.tek.com 2 USB4 Transmitter Compliance and Debug Solution Datasheet Specifications High-Speed electrical tests supported in Tektronix USB4 solution Test Transmitter Preset Calibration Transmitter Equalization Minimum Unit Interval SSC Down Spread Range SSC Down Spread Rate SSC Phase Deviation SSC Slew Rate Rise/Fall Time Total Jitter (TJ) Uncorrelated Jitter (UJ) Uncorrelated Deterministic Jitter (UDJ) Data Dependent Jitter (DDJ) Low-Frequency UDJ (LF UDJ) DCD (Even-Odd Jitter) Eye Diagram AC Common Mode Electrical Idle Voltage Speed Pattern Gen2 (10 Gbps) Gen3 (20 Gbps) PRBS15 SQ128 PRBS31 SQ128 PRBS15 PRBS31 PRBS31 Idle Test Point TP2 TP3 www.tek.com 3 USB4 Transmitter Compliance and Debug Solution Datasheet Ordering information TekExpress USB 4 Transmitter Compliance and Debug Solution DPO/MSO70000SX/DX 3 DPO/MSO70000SX/DX Opt. USB4 4 DPO-UP USB44 DPOFL-USB44 DPOFT-USB44 Tektronix DPO (Digital Phosphor Oscilloscope) or MSO (Mixed Signal Oscilloscope) Oscilloscopes 23 GHz and above with DPOJET (DJA) and SDLA64 installed TekExpress USB4 Tx Compliance and DPOJET: USB4 Tx/Rx Measurement Plugin Solution (Requires Opt. CIO, DJA, SDLA64) TekExpress USB4 Tx Compliance and DPOJET: USB4 Tx/Rx Measurement Plugin Solution (Requires Opt. CIO, DJA, SDLA) TekExpress USB4 Tx Compliance and DPOJET: USB4 Tx/Rx Measurement Plugin Solution (Requires Opt. CIO, DJA, SDLA64); Floating TekExpress USB4 Tx Compliance and DPOJET: USB4 Tx/Rx Measurement Plugin Solution (Requires Opt. CIO, DJA, SDLA64); Floating Trial Recommended USB4 Controller, High-Speed test fixture, and accessories Item USB4 Controller and High-Speed Test Fixtures: USB4-TPA-UC-K SMP(F) to 2.92mm(F) Adapter: SM8852 [Optional] SMP Terminators: ST2643 PMCABLE1M Phase Matched SMA cable set Vendor Wilder Technologies Fairview Microwave Fairview Microwave Tektronix Quantity 1 Min 4 4 2 Oscilloscope and software prerequisite requirements Operating System DUT Control Tool Controller Driver and Software Matlab Runtime SigTest Tool DPO/MSO70000SX/DX with Microsoft Windows 10 OS The USB4 Electrical Test Tool (ETT) v 0.9.9 (or above) should be available on the oscilloscope. The USB4 ETT is available on the USB-IF Test Tools site www.usb.org/document-library/usb4ett. Wilder Technologies USB4 Controller Driver and Software should be available on the oscilloscope. Contact Wilder Technologies for software support. Install the Matlab Runtime v R2019b(9.7) on the oscilloscope to run the USB4 SigTest tool. You can download the installable from www.mathworks.com/products/compiler/matlab-runtime.html. Copy the SigTest executable on the oscilloscope. You can download the installable from www.usb.org/ document-library/usb4-sigtest. 3 Required items: Opt DJA and Opt SDLA64. Optional items: Opt 10XL and DPO7AFP. 4 Requires Opt. CIO, DJA, and SDLA64, and 23 GHz oscilloscope. ASEAN / Australasia (65) 6356 3900 Belgium 00800 2255 4835* Central East Europe and the Baltics +41 52 675 3777 Finland +41 52 675 3777 Hong Kong 400 820 5835 Japan 81 (120) 441 046 Middle East, Asia, and North Africa +41 52 675 3777 People's Republic of China 400 820 5835 Republic of Korea +822 6917 5084, 822 6917 5080 Spain 00800 2255 4835* Taiwan 886 (2) 2656 6688 * European toll-free number. If not accessible, call: +41 52 675 3777 Austria 00800 2255 4835* Brazil +55 (11) 3759 7627 Central Europe & Greece +41 52 675 3777 France 00800 2255 4835* India 000 800 650 1835 Luxembourg +41 52 675 3777 The Netherlands 00800 2255 4835* Poland +41 52 675 3777 Russia & CIS +7 (495) 6647564 Sweden 00800 2255 4835* United Kingdom & Ireland 00800 2255 4835* Balkans, Israel, South Africa and other ISE Countries +41 52 675 3777 Canada 1 800 833 9200 Denmark +45 80 88 1401 Germany 00800 2255 4835* Italy 00800 2255 4835* Mexico, Central/South America & Caribbean 52 (55) 56 04 50 90 Norway 800 16098 Portugal 80 08 12370 South Africa +41 52 675 3777 Switzerland 00800 2255 4835* USA 1 800 833 9200 For Further Information. Tektronix maintains a comprehensive, constantly expanding collection of application notes, technical briefs and other resources to help engineers working on the cutting edge of technology. Please visit www.tek.com. Copyright © Tektronix, Inc. All rights reserved. Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supersedes that in all previously published material. Specification and price change privileges reserved. TEKTRONIX and TEK are registered trademarks of Tektronix, Inc. All other trade names referenced are the service marks, trademarks, or registered trademarks of their respective companies. 16 Jun 2021 61W-73751-1 www.tek.comAH XSL Formatter V7.0 MR4 for Windows (x64) : 7.0.5.46841 (2020-08-31T10:02 09) Antenna House PDF Output Library 7.0.1604