TaoTronics Ice Maker

Thank you for being our customer! Your purchase is truly appreciated! We hope you are over-the-moon with our product!

Contents

1. Important Safety Instructions (Pages 01-03)
2. Before Using Ice Maker (Pages 04-07)
3. Using Your Ice Maker (Pages 08-09)
4. Cleaning and Maintenance (Pages 10-11)
5. Troubleshooting Guide (Pages 12-13)

1. Important Safety Instructions

WARNING

WHEN USING ELECTRICAL APPLIANCES, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING:

• DO NOT touch or hold the mains plug with wet hands.
• DO NOT immerse any part in water or any other liquid.
• DO NOT tip the Ice Maker over.

Electricity Safety

• Ensure the voltage of the power outlet matches the voltage indicated on the appliance.
• Do not operate the appliance if the power cord or plug is damaged.
• Do not attempt to repair the appliance yourself.

Intended Use

This appliance is intended for household use only. It is not suitable for commercial use.

Related to Use

• DO NOT use outdoors.
• DO NOT use the appliance for anything other than its intended purpose.
• DO NOT use any accessories not recommended by the manufacturer.
• DO NOT use the appliance if it has been dropped or damaged.
• DO NOT operate the appliance without water in the reservoir.
• DO NOT touch the ice making mechanism.
• DO NOT cover the air outlet.

For Household Use Only

READ AND SAVE THESE INSTRUCTIONS

Have your ice maker checked regularly for any sign of malfunction!

Check if plug, cord or appliance is damaged.

Specifications

Important Note: Settle the appliance for at least 2 hours before plugging in.

2. Before Using Ice Maker

Preparing for Use

Step 1: Remove all exterior and interior packaging. Check that all parts are inside.

Step 2: Clean the interior, ice basket, and ice scoop with lukewarm water and a soft cloth.

Step 3: Place upright on a flat, level surface away from direct sunlight and/or other heat sources.

Step 4: Settle the appliance for at least 2 hours before plugging in.

Control Panel and Display

Display Screen:

• Clean: Indicates the cleaning cycle.
• S/L: Indicates the selected ice size (Small or Large).
• Ice Full: Indicates the ice basket is full.
• Add Water: Indicates the water level is low.
• Dynamic Working Status: Shows the current operation status.
• Accumulated Working Time: Displays the time elapsed.

Control Panel:

• Clean: Press to start the cleaning cycle. Press 'Start/Stop' to initiate cleaning.
• S/L: Press to select the desired ice size (Small/Large).
• Start/Stop: Press to start or stop making ice or cleaning.

3. Using Your Ice Maker

Step 1: Fill with clean drinking water. Do not exceed the MAX line.

Step 2: Plug into a properly installed grounded wall outlet.

Step 3: Press S/L to select the desired size of ice (Small / Large).

Step 4: Press Start/Stop to start the ice making cycle (6-8 minutes).

Step 5: Once ready, remove the ice from the basket with the scoop.

Note:

• When "Add Water" lights up, fill water up to the max level and press "Start/Stop".
• When "Ice Full" lights up, remove the ice in time.
• It is recommended to change water every 24 hours to ensure a reasonable hygiene level.
• This is not a freezer; please put the ice in use or into a freezer once it is made.
• If you reselect the ice size during ice making, the new size will be made only when the previous cycle is completed.

Usage Examples:

• Iced Drinks
• First Aid
• Smoothies
• Fresh Food

Important Note: Leave 6 inches space around the unit.

4. Cleaning and Maintenance

System Cleaning

Plug the ice maker into a properly installed grounded wall outlet before system cleaning.

Step 1: Fill with clean drinking water. Do not exceed the MAX line.

Step 2: Press Clean, then press Start/Stop to start the cleaning cycle.

Step 3: Once completed, drain out the water by unplugging the drain cap.

Regular Cleaning

Unplug the ice maker before regular cleaning.

Step 1: Take out the ice basket.

Step 2: Clean the interior with warm water and a soft cloth.

Step 3: Rinse inside parts and drain out the water.

Step 4: Clean the exterior with lukewarm water and a soft cloth.

Step 5: When not in use for an extended period of time, drain water completely and dry the interior.

5. Troubleshooting Guide

The troubleshooting guide addresses the most common problems. If problems persist, feel free to contact the Customer Support at support@taotronics.com.

Warranty and Service

Thanks for choosing TaoTronics Ice Maker. This product is covered by TaoTronics's limited warranty. For more information, please refer to the warranty card.

The warranty will not apply in cases of:

• Accidental damage, misuse, abuse, or neglect.
• Improper operation or maintenance.
• Unauthorized modification or repair.
• Damage caused by external factors such as power surges, floods, or fire.
• Commercial use of the product.
• Normal wear and tear.

For warranty service or product support, please contact Customer Support before returning the product.

Contact Information:

• Email: support@taotronics.com
• Website: www.taotronics.com

Please have your order number and product model ready when contacting customer support.