User Manual for JYX models including: JYX66BT, 2AZJV-JYX66BT, 2AZJVJYX66BT, JYX-66BT Karaoke Machine with 2 Wireless Microphone, Karaoke Machine with 2 Wireless Microphone
SHENZHEN CITY JIAYUXIANG ACOUSTICS ELECTRONIC CO.,LTD. JYX66BT ACOUSTICS 2AZJV-JYX66BT 2AZJVJYX66BT jyx66bt
160.00 mm 115.00 mm USER MANUAL MODEL:JYX-66BT 2020-11-03 Catalogue Introduction....................................................................1 Product functions.........................................................2-4 Remote control............................................................ 5-6 Technical Indicators........................................................7 Packing list....................................................................7 FQA..............................................................................8 Dear users: Thanks for your purchasing.Please read the directions carefully before using and follow the correct instructions. Matters needing attention To ensure safety, please read carefully and follow the following safety instructions 1.The equipment is up to The China Compulsory Certification. 2.The equipment should be used in a dry environment. 3.Do not place a fire source near the equipment. 4.Do not use near water source to avoid corrosion of products and accessories. 5.Do not open or disassemble or repair the battery module by yourself.There will be a risk of explosion if the battery is not replaced properly.Do not put the battery into water, fire or any overheated environment. 6.When taking an airplane, please follow the relevant regulations and regulations of the airline company to turn off this product before the airplane takes off to avoid any hidden danger. 7.The charging cable cannot be squeezed, pulled, bent, knotted, or suspended from heavy objects in order to avoid damage to the insulation layer of it and cause electric shock. MASTER 1 21 20 19 18 17 16 15 14 13 12 POWER 5V 1A USB TF Card AUX IN MIC 1 MIC 2 Priority MIC OFF ON MIC.VOL ECHO BASS 0 1 2 3 5 6 7 8 PREV PLAY/PAUSE NEXT REC TREBLE 4 9 MODE 11 2 3 4 5 6 78 9 10 Operation Guide 1.Master: Main volume control knob 2.Number Key: Press to switch to the program with the corresponding serial number 3.Previous: Short press to switch to the last program; long press to fast backward. 4.Reverb: Adjust reverb. 5.Play/Pause: Short press to play/pause; In radio mode,long press for automatic radio station search; In bluetooth mode,long press for TWS(only valid for the same model) 6.Next: Short press to switch to the next program; long press to fast forward. 7.Bass: Adjust bass sound. 8.REC: Long press to record audio,during this process, short press to stop recording.When there is a recording file in the storage device,short press is to play the recording file.(The recording function is only available when a storage device is pluged in) 9.Mode: short press to switch between bluetooth,flash card,TF card and FM radio.When bluetooth has already connected,long press to disconnect. 10.Treble: Adjust treble sound 11.MIC VOL: Adjust microphone volume 12.MIC Priority:When use microphone while playing audio, press this button to reduce the sound of the background audio 13.Dynamic Microphone jack(6.35mm) 14.Condenser Microphone jack(3.55mm) 15.AUX IN Jack 16.TF Card Port 17.USB Port 18.Charging Indicator Light 19.5V Charging Port 20.Power 21.Sound Receiver Hole Bluetooth Connection 1.Turn on bluetooth on your mobile device. 2.Press "Mode" key and switch the speaker to BT mode. 3.Select "JYX-66BT" from available devices.(If JYX-66BT is unavailable,please switch back to Bluetooth mode and try again ) AUX- IN Transmit audio without Bluetooth by plug 3.5mm audio cable into AUX IN jack,the speaker will play the audio from input device automatically. USB and TF Input When insert USB or TF card into speaker,the speaker will play the audio from USB/TF card automatically. FM Radio 1.Pull out the antenna on the top of speaker. 2.Press "Mode" key to switch to radio station. 3.Long press "Play/Pause" key to search and save more available stations automatically. 4.The station searching completed when it no longer switch automatically. 5.Press "Next" or "Previous" to select your own station. REC 1.Plug in a TF card or flash card 2.Long press "REC" to start recording,short press to end recording. 3.Short press "REC" again to play the recording audio. TWS Function To use this feature,two JYX-66BT systems are required. 1.Turn on the two JYX-66BT and turn them both into Bluetooth mode.Two machines will flash "BLUE" on screen. 2.Long press the "PLAY/PAUSE" button of either of the two machines(Only need to press one button),the other machine will make a prompt tone and stop flashing. TWS function will be activated by then. 3.Connect your device with the speaker and play music. 4.Long press "PLAY/PAUSE" button again to inactivate TWS function. If you're still wondering about these steps, please contact customer service team for a video tutorial:service-us@szjyx.com.cn Remote control Directions of Remote Control 1.Silent:press to Silent ON,press again to Silent OFF. 2.Mode:Press to switch the system between USB,TF card,Radio station,AUX IN and Bluetooth modes. 3.BT:Press to switch to Bluetooth mode in any working state. 4.Play/Pause:When in USB/TF card mode,short press to play/pause the program,long press to repeat.When FM works,short press to silent ON,long press is for searching radio stations. 5.Next. 6.REC 7.Digital keys:Press to play the program with the corresponding serial number. 8.Repeat:Press for single loop and list loop. 9.Vol+ 10.PREV. 11.Vol12.REC Play:Press to play the recording file. Product Parameters ModelJYX-65BT Speaker size: 6.5 inch bass + 2 inch treble RMS: 15W Input voltage: 5V Package includes Speaker system.................................................................... 1PC Charging cable......................................................................1PC User manual..........................................................................1PC Remote control......................................................................1PC 3.55mm audio cable...............................................................1PC Adjustable shoulder strap.......................................................1PC FAQ Q:The system can not start up. A:Charging the built-in battery; Check if the adapter is connected securely. Q:The system provides no sound. A:Check if the system is power on. Adjust the volume. Q:The Bluetooth connection is not available. A:Move your device closer to the system. Check to see if the Bluetooth is engaged. Q:Unable to connect two system with TWS feature. A:Make sure the two systems are within one meter of each other. Q:Reset the system. A:If the system does not respond to any operations,long press "Power" key for 8 seconds to reset the system. (Notes:If necessary,contact after-sales team) Contact Information SHENZHEN CITY JIAYUXIANG ACOUSTICS ELECTRONIC CO.,LTD. JIA YU XIANG(HK)INTERNATIONAL ELECTRONICS CO.,LIMITED Factor address:NO.7th Building,Houhaixufa Industrial Zone, Loucun,Gongming town,Guangming District,Shenzhen,China TEL:+(86)-0755-23410725 FAX:+(86)-0755-27508507 Website:www.szjyx.com.cn E-mail:service-us@szjyx.com.cn FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.