User Manual for Haier models including: HW80-BP1439N, Front Loading Washing Machine, Washing Machine, Front Loading Machine, HW80-BP1439N Front Loading Washing Machine
to the manual of detergent. 3.5 Function buttons. The function buttons (Fig. 3-5 ) enables additional op- tions in the selected programme before programme start.
3.5.2-Function button “Speed”. Press this button (Fig. 3-5-2) to change or deselect the spin of the programme. If no value is illuminated the laundry will not spun.
to the manual of detergent. 3.5 Function buttons The function buttons (Fig. 3-5 ) enables additional op-tions in the selected programme before programme start. The related indicators are displayed.-gramme, all options are disabled. If a button has multiple options, the desired option can be selected by pressing the button sequentially.
User manual Washing machine
HW80-BP1439N
EN
Legend
Warning Important Safety information
EN
2-Product description
Note:
2.1 Picture of appliance
1
234
C otton S ynthetics Mix B aby clothes H ygienic S portw ear Je a n s
C otton+
Fast wash Quick 15" Daily Wash
Wool Delicate Handwash Bedding
Spin
HW70-BP1439
Tem p
Speed
Steam
Extra rines Delay Start/pause
Speed up
A +++ Energy
7kg Capaci ty
1400 rpm
5
-
1 2 3 45 6
T3
S1
T4
S2
S6
S3 T1
S5 T2
6
S4
7
1. Detergent / Softener drawer 2. Programme se lector 3 . Worktop 4. Display 5. Rating plate 6. 7. Adjustable feet
1. Transportation bolts (T1-T4) 2. Back cover 3. Back cover screws (S1-S6) 4. Power cord 5. Water inlet valve 6. Drain hose
2.2 Accessories
Check the accessories and literature in occordance with this list (Fig.: 2-3).
2-3
Inlet hoseassembly
5 Blanking Noise red- Drain hose Warranty
plugs uction pads bracket
card
7
3-Control panel
3
C otton S ynthetic Mix Baby Care Hygiene Under wear Cotton 20°C E co 40-60
EN
Fast Express 15min
Sport Wool Delicate/silk Jeans Duvet
Spin
HW80-BP1439N
Temp
Speed
Steam Extra rins e Delay Start/pause Speed up
1400
rpm
8kg
Capacity
"
"
2
" "
"
"
Note : Acoustic signal
Infollowing cases an acoustic signal sounds:
when pressing a button when turning the programme selector
at the end of programme in case of failures
3-1
Press this button (Fig. 3-1) gently to switch on, the display is shining, the indicator of the "Start/Pause" button
3-2
a while machine will shut down automatically.
3.2 Programme selector
By turning the knob (Fig. 3-2) one of 16 programmes can be selected .
3-3
8
3.3 Displ ay
The display (Fig. 3-3) shows following information: Washing time End time delay Error codes and service information
EN
3-Control panel
3.4 Detergent / Softener drawer
3-4
Open the drawer, three compartments can be seen (Fig. 3-4): Compartment 1 : Water inlet only, no detergent Compartment 2 : Detergent for programme
Compartment : Softener, Conditioning agent etc.
The recommendation on the type of detergents is suitable for the various washing temperatures, please refer to the manual of detergent.
3.5 Function buttons
The function buttons (Fig. 3-5 ) enables additional options in the selected programme before programme
3-5
start. The related indicators are displayed.
gramme, all options are disabled.
If a button has multiple options, the desired option can be selected by pressing the button sequentially.
To delete the setting or to cancel the setting p rocess, press the function button until the desired LED lights or
Note: Factory settings
If there is no special requirement default settings are recommended.
3.5.1-Function button "Temp." Press this button (Fig. 3-5-1) to change the washing temperature of the programme. If no value is illuminat-
ed the water will not be heated.
In conjunction with the "Steam" button, the child lock
3-5-1
3-5-2
3.5.2-Function button "Speed" Press this button (Fig. 3-5-2) to change or deselect the spin of the programme. If no value is illuminated the laundry will not spun.
3.5.3-Function button "Steam"
3-5-3
Press this button (Fig. 3-5-3) to activate the steam function. When this function is activated the default temperature is the maximum temperature of the programme selected.
This function can be activated only with the following programmes: Hygiene, Baby Care , Mix, Synthetic, Cotton. When the function is activated the led above the button will light up. Pushing again this button the function can be deactivated and the led above the button
will turn off.When the function is activated the temperature of the programme cannot be changed.
9
3-Control panel
EN
When the function is activated the temperature of the programme cannot be changed. If "Temp." button is pushed the "Steam" function will be deactivated. You can activate "Steam" function only before to start any programme. You cannot activate "Steam" function while the appliance is already executing a programme.
3-5-4
3.5.4 Function button"Extra rinse" Press this button (Fig. 3-5-4) to rinse the laundry more
intense with fresh water. This is recommended for peo
ple with sensitive skin. By pressing the button several times one to three additional cycles can be selected. They appear in the display with P--1/P--2/P--3.
3-5-5
3.5.5 Function "Speed up"
This function saves time and energy. Preferable if laun-
dry is slightly soiled. Press simultaneously button "Extra
rinse." and "Delay" (Fig. 3-5-5) for about 3 seconds to
activate the "Speed up" function;
is displayed.
This function is not available in all programmes (see
PROGRAMMES).
3-6
3.6 Function button "Delay"
Press this button (Fig. 3-6) to start the programme with
a delay. End time delay could be increased in steps of
means end of programme cycle will be in 6 hours and 30 minutes. Press "Start/Pause" button to activate the time delay. It is not applicable to programme SPIN. The default delay setting time is greater than the running time of the program.
Note: Liquid detergent
If usingliquid detergent, it is not recommendedto activate the end time delay.
3-7 3-8-1 3-8-2
3.7 "Start/Pause" button
Press this button (Fig. 3-7) gently to start or interrupt the currently displayed programme. During programme setting and during programme run the LED above the button is shining, or if interrupted blinking.
3.8 Child lock
Press button "Temp." and "Steam" (Fig. 3-8-1) for 3 seconds simultaneously to block all panel elements against activation. For unlocking please press again the two buttons.
T he display shows
(Fig. 3-8-2) if a button will be
pressed, when the child lock is activated. The change is
not running.
10
EN
4-Programmes
Yes, º Optional, / No
Detergent compartment for: 1 Water inlet only, no deter-
gent 2 Detergent
Softener or care product
Max. load Temperature
in kg
in °C
HW80-BP1439N seletable
Programme
range
2 1 Fabric type
Cotto n
8
Synthetic
4
Mix
8
* to 90 2) 40 * to 60 40
* to 60 30
º / Cotton
º /
Synthetics or mixed fabric
Lightly soiled
º/
mixed-laundry of cotton and
synthetics
Preset Function spin speed
in rpm
1400 1200 1000
Baby Care
4
Hygiene
4
Underwear 4
Cotton 20°C 8
Eco 40-60 8
Fast 3)
4
Express 3) 15 min
2
Sport
4
Wool
2
Delicate/silk 2
* to 902) 40
90 90
* to 60 40
20 20
/
/
* to 40 40
* to 40 * * to 40 20 *to 40 *
* to 30 30
º / Cotton/Synthetics
º / Cotton º / Underwear º / Cotton º / Cotton
Lightly soiled laun-
º / dry made of cotton or synthetics
º/
Cotton / Synthetics
º / Sports wear
/
/
Machine-washable fabric made of
wool or with wool
cont ent
/ / Delicate laundry and silk
1000 1000 1000 1400
/
1000
1000 800 800
400
/
/ / // /
/
/
/
/
/
/
//
/
/
Jeans
4
Duvet
2
Spin
8
* to 60 30
º / Cotton
* to 40 40
/ / Duvet
/
/ / / / all fabrics
1000
800 1000
/
/ // /
1) Relating to dry laundry. 2) Choose 90 °C wash temperature only for special hygiene requirements. *: water will not heated (no
value is iluminated). 3) Reduce detergent amount because programme duration is short.
11
Scan QR code on energy label for energy consumption information. ccording to local
conditions.
EU1015/2010 program
Select Eco 40-60, press "speed" 10s, then adjust to 60°C/40°C with max. spin speed.
The standard 60°C and 40°C cotton programmes are suitable to clean normally soiled
combined energy
and water consumption for cotton laundry.Actual water temperatu
declared cycle temperature.
Note: Auto Weight
The appliance is equipped with a loading recognition. At low loading, energy, water and washing time will be reduced automatically in some programs (Cotton,Synthetic,Mix,Baby
Care,Cotton 20°C,Eco 40-60). The display shows .
GB
6-Daily use
6.5 Selecting detergent
W Use only machine wash approved detergent.
ergents, e.g. for synthetic and woolen fabric. Mind always detergent manufacturer recommendations. Do not use dry cleaning agents such as trichloroethylene and similar products.
Choose the best detergent
Programme
Universal
Kind of detergent
Colour
Delicate
Special
Softener
Cotton Synthetic Mix Baby Care
L/P
L/P
L/P
L
L/P
-
-
-
-
-
-
-
L/P
L/P
Hygiene
L/P
L/P
-
-
Underwear
-
-
L/P
L/P
Cotton 20°C
L/P
L/P
-
-
Eco 40-60
L/P
L/P
-
-
Fast
L/P
L
-
-
Express 15 min
L
L
-
-
Sport
-
-
L/P
L/P
Wool
-
-
L/P
L/P
Delicate/silk
-
-
L/P
L/P
Jeans
L
L
-
-
Duvet
-
-
L
L/P
Spin
L = gel-/liquid detergent
-
-
P = powder detergent
-
O = optional
_
-
= no
If using liquid detergent, it is not recommended to activate the time delay.
We recomment by using: Laundry powder:
Color detergent:
20°C to 90°C* (best use: 40-60°C) 20°C to 60°C (best use: 30-60°C)
Wool/delicate detergent: 20°C to 30°C ( best use:20-30°C)
* Choose 90 °C wash temperature only for special hygienic requirements.
15
6.7 Switch on the appliance
(Fig. 6-5). The LED of the ,,Start/Pause" button is flas-
hing.
6.8 Select a programme
To get the best washing results, select a programme
type. Turn the programme knob (Fig. 6-6) to select the right programme. Related programme LED lights up and the default settings are displayed.
E
Spin and then se-
lect 4.
programme and start it.
3.
om par tm ent(2 ) orus e asp ecial .
machine cleaner
9-Troubleshooting
GB
of a problem please check all shown possibilities and follow below instructions before you contact an after sales service. See CUSTOMER SERVICE.
WARNING!
Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. improper repairs can cause considerable consequential damages.. A damaged power cable should only be replaced by the manufacturer, its service
9.1 Information codes
Following codes are displayed only for information referring to the washing cycle. No measures must be performed.
Code :
Message The remaining wash cycle time will be 1 hour and 25 minutes.
: //
The remaining wash cycle time including chosen end-time delay will be 6 hours and 30 minutes. 1/2/3 additional rinses are choosen (see FUNCTION BUTTONS "Extra rinse").
Function child lock is activated.
Door is closed because of high water level, high water temperature or spinning cycle.
The buzzer is deactivated.
The buzzer is activated.
Function "Speed up" is activated.
9.2 Troubleshooting with display code
Proble m
Cause
Solution
Drainage error
Check drain hose installation.
Lock error.
Water level not reached.
Drain hose is self syphoning.
Water protective level error.
Shut the door properly.
Make sure that tap is fully opened and water pressure is normal. Check drain hose installation.
Contact the After sales service.
22
D
EN
Remove all packaging material including polystyrene base, keep them out of children´s
10.2 Dismantle the transportation bolts
The transportation bo lts are designed for clamping anti-vibration components inside the appliance during transportation to prevent inner damage. 1. Remove all 4 bolts on the rear side and take out
plastic spacers (Fig. 10-1)(Fig. 10-2). 2. Fill left holes with blanking plugs (Fig. 10-3)(Fig. 10-4).
10-1
10-2
10-3
10-4
25
EN
5
4
5
Tighten locknut (1) against the housing.
5
w
7
6
5
6
5
7
EN
tion(Fig.10-8)
10-8
w
end to the appliance(Fig.10-9).Tighten the
10-9
3/4''thread(Fig.10-10).
10-10
P T T
Put the plug into the socket(Fig.10-11)
10-11
EN
.
10-12
2x 2x
10-13
10.8 Noise reduction pads installation instructions (2.2 Accessories Sponge)
(Fig. 10-12)
lm; the noise washing machine cabinet
set the machine upright again.
Warm tip:
r own
EN
11.1 Additional technical data
Voltage in V Current in A Max power in W Water pressure in MPa Netto weight in kg
11.2 Product dimensions
11-Technical data
HW80-BP1439N 220-240 V~/50Hz
10 1900
72
FRONT VIEW
A B C
Wall
TOP VIEW
HW80-BP1439N
850
595
550
D
1050
E
400
Note: The exact height of your washer is dependent on how far the feet are extended from the base of the machine. The space where you install your washer needs to be at least 40mm wider and 20mm deeper than its dimensions.
11.3 Standards and Di rectives
This product meets the requirements of all applicable EC directives with the corresponding harmonised standards, which provide for CE marking.
29
PDF Candy